Known bug list and known work arounds are in Post 2, at the bottom, below the instructions. Please if you read nothing else, read post 2, and report anything NOT already listed there, thank you.
WeeFeeri was kind enough to take the time to make a video showcasing these CM9 nightlies (featuring Build 46) so check it out HERE! Please be sure to give him your thanks for the taking the time to do this on his own!
As per notsointeresting's suggestion, and a few complaints of dev-host's reliability lately, I setup androidfilehost to hold my stuff, I'll be slowly migrating everything over for use as a mirror.
I'm writing a general guide for the A100, please give it a read if you have any questions. Its a WIP, but is full of goodness, I promise! Guide to all things A100
Since there doesn't seem to be any nightly releases for A100 CM9, I decided to build them myself for myself, then figured, hey, if I build them, why not let others have at them? And with that I present to you....
CM9 Nightlies by pio_masaki
What is a nightly vs whatever release?
Nightlies are untested and considered unstable, however they contain all of the latest source code available. This means things may be fixed, things remain broken, or new things are broken. It also may mean its your new favorite daily driver rom.
What do you do to this rom?
Nothing at all. I only compile after syncing to the repo daily. This is not modified by me in any way, shape or form, completely stock vanilla CyanogenMod roms.
How often will you release these?
Whenever possible I plan to release these nightly, or once a day. I'm sorry if I miss a day or two, I will build and upload when I have the time. I do NOT have time to test each one, so that will have to be a risk you take. This first build boots and runs, I do not know of any bugs or what works or not.
What about bugs?
I don't know, please tell me in the thread and I will add what is broken or fixed to the post. Posted at the bottom of post 2 for now with work a rounds if known, dated with build number reported.
What does the filename mean?
the file names will be in this format: cm-9-6-11-B1-a100-PM.zip
here's the breakdown:
cm-9 is of course, its a CM9 release.
6-11 is the date of the build.
B1 is the build number, tomorrow will be B2, so on. If there is a B1-2 that's a second build for the same day. Not likely, but just in case.
a100 device model this is meant for, please don't use this on another device.
PM is pio_masaki.
Source
Source is directly synced from CM, nothing is added by me. Kernel is directly from ezterry, in his original zip file release, nothing added by me.
Thanks
Thanks to the CM team for doing awesome work to get this kind of stuff to most devices possible!
EzTerry for making an OC kernel for our devices!
da-pharoah for letting me bounce ideas off him and letting me work things out through him and cheering me on for this.
x0hell0x for inspiring me to decide to attempt compiling from source.
Downloads
Theme:
EpicBlueCM9 Theme courtesy of stetsonaw! Be sure to give him your thanks!
Add ons:
ezterry's OC kernel Thread, Please read it all!
Required for Play Store and other Google stuff/framework:
gapps
Optional scripts for wiping:
Blackhole Wipe/Nullifier Thread
Experimental CWM Touch Recovery:
This is an experimental build! Use caution with this!
Removed as it seems pretty broken.
If it works out OK for anyone willing to try it out, I'll do a formal release for it later.
Builds:
Build 6 6-16-12
Build 7 6-17-12
Build 8 6-18-12
Build 9 6-19-12
Build 10 6-20-12
Build 11 6-21-12
Build 12 6-22-12
Build 13 6-23-12 *experimental* (new build machine) Has issues lol skip it.
Build 14 6-24-12
Build 15 6-25-12
Build 15 Experimental
Build 16-2 6-26-12 *see note below Update section*
Build 17 6-27-12
Build 18 6-28-12
Build 19 6-29-12
Build 20 6-30-12 We made it! 20 straight!
Build 21 7-1-12
Build 22 7-2-12
Build 23 7-3-12
Build 24 7-4-12
Build 25 7-5-12
Build 26-4 7-6-12 Had multiple build fails, sorry it's so late.
Build 27 7-7-12
Build 28 7-8-12
Build 29 7-9-12
Build 30 7-10-12 | Mirror
Build 31 7-11-12 | Mirror
Build 32 7-12-12 | Mirror
Build 33 7-13-12 | Mirror
Build 34 7-14-12 | Mirror
Build 35 7-15-12 | Mirror
Build 36 7-16-12 | Mirror
Build 37 7-17-12 | Mirror
Build 38 7-18-12 | Mirror
Build 39 7-19-12 | Mirror
Build 40 7-20-12 | Mirror
Build 41 7-21-12 | Mirror
Build 42 7-22-12 | Mirror
Build 43 7-23-12 | Mirror
Build 44 7-24-12 | Mirror
Build 45 7-25-12 | Mirror
Build 46 7-29-12 | Mirror
Build 47 7-30-12 | Mirror
Build 48 7-31-12 | Mirror
Build 49 8-1-12 | Mirror
Build 50 8-2-12 | Mirror
Build 51 8-3-12 | Mirror
Build 52 8-4-12 | Mirror
Build 53 8-5-12 | Mirror
Build 54 8-6-12 | Mirror Note - the file names are wrong, I was to lazy to reupload them, this is the correct info, ignore the file name.
Build 54 8-7-12 | Mirror
Build 55 8-8-12 | Mirror
Build 56 8-9-12 | Mirror
Build 57 8-10-12 | Mirror
Build 58 8-11-12 | Mirror
Build 59 8-12-12 | Mirror
B60 8-13-12 | Mirror
Build 61+ are now on Goo.im and can be accessed through the goo.im app. Even will tell you when the new nightly is available for you! For now I'll just be updating the thread Build number and date, I won't be linking anymore.
Build Notes
Build 16 is a sort of mile marker, rotation lock fix got merged today! I had already synced and built Build 16, however (and I announced it over twitter for those that care) scrapped it in favor of adding the newly merged Rotation Lock fix! Luckily I was sitting around in #Iconia-dev when it was announced. So, please test rotation lock and report back if its working or not for you guys!
Instructions
Fresh install from another rom:
Download to your external SD card
Reboot into recovery
Backup current installation
Wipe data, system, cache, dalvik cache (optional use my Blackhole scripts)
Install from zip, pick the CM9 zip
Flash gapps
Once done, wipe cache and dalvik cache again
Reboot system
Wait 10 minutes, then reboot system
Log into google and setup your device
Enjoy
Updates from my previous builds:
Backup current installation
Flash the new build zip
Clear cache
Clear dalvik
Reboot
Let settle 10 minutes
Reboot
Enjoy.
Only for updating over a previous PM CM9, not meant for flashing over any other rom, even another CM9.
Advanced update method:
Backup your current PM CM9 install you wish to update
(CWM) Go to mounts, mount /system, then go down to format /system
(CWM) wipe data
(TWRP) Go to wipe, wipe system and data
Install newer PM CM9 version
Install gapps
Go to restore, advanced restore
Restore ONLY Data
Clear cache and dalvik, fix permissions
Reboot system
Let settle 10 minutes
Enjoy
This method will clear the system partition and replace with the new system, but restores your user data, settings, apps, etc. Its IMO a cleaner upgrade method then "Dirty Flashing" straight over the previous rom. Intended ONLY for updates from a previous PC CM9, no other roms.
Current known Bugs
6-11-12, B1: You have to disable the screen off animation or your device will reset everytime you press the power button. Settings>Display> Uncheck Screen-off animation prevents it.
6-12-12, B1: Labros1995 reports rotation lock still broken.
6-16-12, NA: HDMI audio still not working, reported by pomka78
6-19-12, B7: labros1995 reports Torch Toggle does not work, volume is upside down in portrait mode (still uses landscape default layout).
6-29-12, NA: Its not really a bug, but it has come up, themes DO work, however complex themes will give a compiled error. For now, only simple color changing themes work, such as the Holo series of themes. I don't think its the ROMs fault, I think it has to do with the themes not being for Tablets. But, I added it here anyways, as a heads up.
7-1-12, B20: nickownzya reported Chrome crashes going into settings, confirmed by mapaz04. Turns out its the newest version, 18.0.1025.166 (Official Build 130050), confirmed by mapaz04. Chrome version 18.0.1025.133 does not appear to have this issue. The only fix for now, if possible, is to uninstall the update. Not possible on a freshly downloaded restore, but maybe through TiBu or whatever backup app you use. Chrome appears to otherwise function fine, just can't enter settings.
Updates:
6-13: Modified the OPs a little bit, added advanced update instructions in post 2. Added bug list location to post 1.
6-25: Added CWM Touch experimental to downloads, added some whatever info. I dare you to find it!
7-2: I've put my A100 up for sale today, but I will continue building these nightlies until the official nightlies begin rolling out, as promised.
7-2: Added a new link to the downloads section of post 1, EpicBlueCM9 theme by stetsonaw, which he confirms working for our devices!
7-4: Removed builds 1-5 as I'm sure they are no longer needed, and they were using dropbox anyways. All builds now on Dev-Host.
7-4: As the new title states, I've been working on my custom edition CM9, some build.prop tweaks, some init.d tweaks, some free apps that I generally use. It was originally going to be a pre built restore for myself, but I figured, as always, why not share it? Should be available in it's alpha form tonight or tomorrow. Still a LONG way to go on it!
7-6: The custom edition is going a little slower then I expected, hitting a couple of road blocks with the modular expansion I had in mind for running scripts, but it's getting there. cdkg has offered to test run today's alpha, so hopefully that goes well. I can't test stability since I'm constantly flashing new crap to the build, or entire new builds, that I never spend more then an hour on any flash lol. It's coming, eventually. If cdkg doesn't run into any issues I'll put up the alpha 1 build.
7-8: For those that haven't noticed, and the few still that read this section, (does anyone read here?) the custom edition is availble in the Dev section as of this morning, Aoikaze Alpha 3, please give it a whirl and report any issues you may run into, if any (because I'm perfect and all).
7-9-12: As per notsointeresting's suggestion, and a few complaints of dev-host's reliability lately, I setup androidfilehost to hold my stuff, I'll be slowly migrating everything over, then using dev-host as a mirror.
7-25-12: I'm taking a short vacation, I leave the morning of 7-26 and I'll return 7-29, I know it's a short trip, but I think I need a break for a few days. I will likely not have any kind of data up there, so I can't remote the machine to build from there, so there will be NO builds until 7-29. I also probably will fall way behind on the forums as I probably can't check in on them either, so help each other out as best you can! I wanna see peace, love and CM15 when I get back!
8-11-12: General project update. Considering my A100 bricked, I get complaints constantly about slow downloads, missing days, missing features, random broken crap that I said would happen, and other general BS that I keep getting about these builds, I'm considering stopping. I did this as a favor for everyone, it's not my job, it's not required that I do this every single day, and I DON'T GET PAID FOR THIS. So either deal with the slow hosting (it's free, want faster? It costs money) and the random broken things and odd bugs, or please stop messaging me complaining about it or I just won't build these at all, and when CM10 comes up for nightlies, I won't build them either. I'll just do my own thing, build them for myself, and laugh at people with 4 month old CM10 releases (hint, I built a CM10 an hour ago, yes I can build A100 CM10s). All this complaining REALLY makes me wonder why I'm even doing this, spending my time and money on this stuff, when it doesn't seem like it really even matters. It kinda ruins the reason I started doing this and kills my drive to even do anything for android any more, let alone the a100 or the a200. /rant
8-13/14-12 : A final general project update - I'm stopping these for awhile. You may have noticed this message already below the latest download. I'm not going to name names, just know I'm tired of the complaints and demands, if you want to demand I do something, then make it worth my while, until then deal with what I can give you when I can give it. If you aren't happy with my builds, build it yourself.
Thanks for making this available!
CM9 Nightly builds for our A100, it's a beautiful thing.
PM me if the is anything I can do to help
Sent from my A100
All I ask is that if you notice any bugs to post them up so I can add them to the post, as well any anything that used to be broken but now works, hopefully the CM team can take notice and work fixes for our device branch.
Great job man. I will definitely flash this tomorrow and report back with my experience. I love that we have options now!
tested the rom!it works fine! rotation lock not working only..
labros1995 said:
tested the rom!it works fine! rotation lock not working only..
Click to expand...
Click to collapse
Nice thanks for the report I'll add it in. I think that fix is awaiting approval for merging so hopefully that will get fixed soon.
Tapatalked from my Galaxy S II.
Does this have adhoc wifi support or can it be added? I tether my tablet to my nokia phone a lot.
Sent from my A100 using xda premium
plaseo said:
Does this have adhoc wifi support or can it be added? I tether my tablet to my nokia phone a lot.
Sent from my A100 using xda premium
Click to expand...
Click to collapse
Pretty sure all AOSP roms support ad hoc wifi. Tethers to my galaxy s 2 with AOKP fine. AOSP doesn't have the same limitations as Acer roms as they share all android code with pretty much every other device in existence.
Edit: also I'm not a dev, I can't add things to these releases, I'm just syncing the code and making the rom, then putting it online for whoever wants it. That alone takes like 4 hours.
Tapatalked from my Galaxy S II.
Fantastic!! Tomorrow I'll try, anyone reports bugs?
Inviato dal mio A100 usando Tapatalk
Any reported or known bugs are listed in the second post, below the instructions for anyone to see, in case anyone missed my adding it there.
Side note, Build 2 will be available shortly. It seems to only take a couple of hours now instead of 4 like yesterday.
So we can't just upgrade whenever a newer rom is posted? We have to wipe n reflash every time, or can we just wipe dalvik n cache, then flash to update?
Sent from my A100 using Tapatalk 2
MDMonster said:
So we can't just upgrade whenever a newer rom is posted? We have to wipe n reflash every time, or can we just wipe dalvik n cache, then flash to update?
Sent from my A100 using Tapatalk 2
Click to expand...
Click to collapse
Well you can dirty flash the same rom over each other. And yes clear cache and dalvik after flashing. The instructions are for fresh installs from another rom. Keep in mind this may prevent fixed bugs from being fixed on your install but if anything broken shows up fixed I'll post it.
Tapatalked from my Galaxy S II.
pio_masaki said:
Well you can dirty flash the same rom over each other. And yes clear cache and dalvik after flashing. The instructions are for fresh installs from another rom. Keep in mind this may prevent fixed bugs from being fixed on your install but if anything broken shows up fixed I'll post it.
Tapatalked from my Galaxy S II.
Click to expand...
Click to collapse
K, thx :-D
Sent from my A100 using Tapatalk 2
MDMonster said:
K, thx :-D
Sent from my A100 using Tapatalk 2
Click to expand...
Click to collapse
No problem. I'll add those to the first post with the install instructions too.
Tapatalked from my Galaxy S II.
pio_masaki said:
No problem. I'll add those to the first post with the install instructions too.
Tapatalked from my Galaxy S II.
Click to expand...
Click to collapse
Awesome :-D . I knew about it with my captivate, but like no one ever mentions that with any Iconia ROMS, so I thought it was different with them. Thx for clearing that up for me
Sent from my A100 using Tapatalk 2
This looks awesome, will be spending some time with this tomorrow, will post whatever tweaks etc work and dare useful
Loving the latest cm9 on my touch pad to have it here too is real nice
Sent from my A100 using xda premium
Awesome! Thanks pio! Testing this now. I noticed there is no Power Control widget. Is there a way to get the AcerRing on this one?
Sent from my A100 using xda premium
[email protected] said:
Awesome! Thanks pio! Testing this now. I noticed there is no Power Control widget. Is there a way to get the AcerRing on this one?
Sent from my A100 using xda premium
Click to expand...
Click to collapse
Not sure what you mean by power control widget, but you can add toggles to the clock pop up and scroll down. I have my wifi bt gps and brightness there.
Acer ring will only be available if one of the devs decides to port it to CM9 as there's changes to be made in the framework to get it working. Just pushing the apk won't work.
Tapatalked from my Galaxy S II.
pio_masaki said:
Not sure what you mean by power control widget, but you can add toggles to the clock pop up and scroll down. I have my wifi bt gps and brightness there.
Acer ring will only be available if one of the devs decides to port it to CM9 as there's changes to be made in the framework to get it working. Just pushing the apk won't work.
Tapatalked from my Galaxy S II.
Click to expand...
Click to collapse
Yeah, the toggle widget but I can use Widgetsoid or the toggles in the notification pop up.
Lol that's what I did, flashed the AcerRing zip to push the apk. Of course that didn't work.
So far so good.
Sent from my A100 using xda premium
Related
Bugs, issues and Discussions about Kang-builds (aka nightly-builds) of Te4m CM9 project belong here and ONLY HERE
To official DEVELOPERS-thread
To official general discussion-thread
This is the right place to report bugs and issues and discuss about the different builds, especially, but not only, the ones downloaded from
http://android.spike1985.de.
Use a download manager!
You can also announce/promote your own builds here. Please do not forget to mention where people can get them. Also a list of improvements/changes and known NEW issues would be nice to help ppl.
You can also send me requests to host YOUR builds on android.spike1985.de, to help making it a real nightly build and bleeding edge server. I am also willing to add a "link-list-file" to the server, if you feel uncomfortable with giving your builds away.
I will not publish a list of builds announced/promoted/mentioned in here and/or hosted on my server, as I want interested ppl to have a look onto the server.
This threat has been opened on my own intention. I want to help to keep the main threats (Dev and general) a bit cleaner from bug reports of kang-builds.
great
Nice this thread would be helpful for people who build kangs
ronak.super said:
Nice this thread would be helpful for people who build kangs
Click to expand...
Click to collapse
That was my intention...
a great ROM. the only thing missing: a working camera and a normal multi-touch.
@spike1985 I've tried downloading both of the roms you're hosting multiple times but each time it cancels out the download at random intervals. I have a very stable connection so are you experiencing extraordinarily high demand and is there possibly another place these builds are hosted? I'd love to give these babies a shot
thank you spike 1985. Rom is excellent, very quick and smooth, I feel like using the dual-core device. Expect updates in the near future.
congratulations
Hey Spike just one quick question. I see you own a GT-P1000 ... can I use the kernel from your server for the GT-P1000 or is it for a different one.
I guess the zip will be flashable, right?
ghostparty13 said:
@spike1985 I've tried downloading both of the roms you're hosting multiple times but each time it cancels out the download at random intervals. I have a very stable connection so are you experiencing extraordinarily high demand and is there possibly another place these builds are hosted? I'd love to give these babies a shot
Click to expand...
Click to collapse
me too...
10 char...
When i try to download the files "normal", the download stops after some time on x%. When i download the files with firefox and DownThemAll! it works
So you should try DownThemAll or another Download Manager.
xantus73 said:
When i try to download the files "normal", the download stops after some time on x%. When i download the files with firefox and DownThemAll! it works
So you should try DownThemAll or another Download Manager.
Click to expand...
Click to collapse
Worked beautifully flashing now!
13/02/12 Kernels - Updated Initramfs - CWM flashable.
This is NOT a official release, flash it at your own risk, i have tested it on my P1000N, everything is working fine .
Also recovery is working fine is this kernel
Please report if it works.
-CDMA-
http://www.mediafire.com/?irherkk94kvu6fj
-P1000-
http://www.mediafire.com/?6fa34c4v84sd0t3
-P1000N-
http://www.mediafire.com/?bm366wl6l6csqzw
-P1000L-
http://www.mediafire.com/?dey9mwdgffk81ho
On my P1000 works fine, thanks for the kernel
Kernel is working fine on P1000N and P1000 (Thanks Hasib )
Uploading my self-compiled rom (11/02/12).....
P1000 works fine! Thanks!
11/02/12 CM9 Self-Compiled ROM
Instructions (Thanks to Humberos)
ROM: http://www.mediafire.com/?c4e6j2wgvc9sqfe
Gapps (Also thanks to Humberos) : http://dc131.4shared.com/download/yZIPh1vb/gapps_ics_403_v11.zip
1-Copy all files ( ROM + Kernel + GApps) to sdcard
2-Recovery Mode
3-Install ROM (don't restart)
4-For All Models - Install Kernel (don't restart yet)
5-Install GApps (after install, restart)
Ill just leave this here.
P1000 Only - Lastest ROM is slim_build_02242012.zip
Mirror 1 - http://www.mediafire.com/?id5yu2qyy5zqu
Mirror 2 - http://android.spike1985.de/
Mirror 3 - http://184.22.194.197/ICS/
G-Apps - http://goo-inside.me/gapps (use the only CM9 one there, seriously cant mess that **** up can you)
Install:
1 - Wipe dalvik and cache if coming from my previous build, else wipe all
2 - Flash ROM, reboot.
3 - Flash GAPPs (only if needed)
4 - Reboot
Dont complain in the DEV thread about this ROM or Kernel. Not an official TE4M build.
hey slimdizzy can you tell me what is fixed in your build thanks
Hasib1234 said:
hey slimdizzy can you tell me what is fixed in your build thanks
Click to expand...
Click to collapse
All the latest commits up to yesterday soBLX is in there
Sent from my Nexus S using xda premium
slimdizzy said:
All the latest commits up to yesterday soBLX is in there
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
Hi which file do we flash as there is a copy of each.
Sent from my GT-P1000 using Tapatalk
NENENE said:
Hi which file do we flash as there is a copy of each.
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Look at the file names, they are dates.
ABOUT THIS ROM:
This is a KANG/UNOFFICIAL CM9 version built from CM9 sources. It has some cherry-picks from Gerrit, that I find interesting and enhance the rom to be better feature wise.
I will be doing builds on daily basis (mostly on morning EU time), atleast until CM starts to rollout nightlies on normal schedule.
As I said in the beginning, this is purely been a learning experience to work with Android source and building it from the scratch.
I might be doing something completely different (own rom based on something) when I have gained more experience. If you are interested to start something, pm and let's see if we can get something out of it
WHY??
I know there are many many many CM9 roms/kangs floating around, so why did I post this? For a simple reason: It has been a learning experience for me to work with source and building android. This is my first complete android build, and I find CM9 to be a good starting point.
INCLUDED IN THIS ROM (Basic features):
- Synced to cm9 repo today 12.4.2012
- Includes all the CM9 features that have been merged until now
- Includes few cherry picks from Gerrit (see list below)
- Default CM based kernel
- The default CM9 bells and whistles
CHERRY-PICKS from CM Gerrit
- AudioManager: Handle KEYCODE_VOLUME_MUTE
- Settings: Notification light(LED) settings
- NavigationBar : Customization+ Settings
- Make the flash off indicator visible
- Makes network mode toggle work. Port from CM7.
- camera: allow setting parameter "video-size" before recording starts
- MMS: Make notifications consistent with the Gapps'.
- Phone: Disable accelerometer sensor while in-call and screen UI is off
- Fix don't interrupt ongoing PIN/PUK verification
Install instructions (first install):
1) Download zip to your phone
2) Also download GAPPS from http://goo.im/gapps
3) Boot to CWM
4) DO A FULL WIPE IN RECOVERY (a must if you are coming from another rom)
5) Flash the ROM .zip
6) Flash GAPPS .zip
7) Reboot
8) PROFIT???
About updating:
It should be safe to do "dirty flashes" between builds, unless I say otherwise. But ofcourse if you run to problems between builds, do a wipe first (use f.ex TiBu to backup apps) and try again. It's always possible that some feature gets broken or some cherry-pick ****s up things....but hey these are nightlies right?
To users/flashers
It would be nice if you could test this, and if you have some features found on Gerrit what you would like to see implemented, just post here and I'll check it out and maybe include it in the next build
I honour all feedback from you guys..the more the better so I can learn more.
DOWNLOAD:NIGHTLY 12042012
Credits and thanks
- CyanogenMOD developers + team (for offering us the source and lot of features)
- swordrune10 for answering my n00b questions and for all the help
- Everybody else i forgot xD
Changelogs
CHANGELOGS
Nightly 12.4.2012
- Few official merges in to the source have been included in this build.
- Few fixes for above cherry picks (new patches)
Nightly 11.4.2012
- First public build
Nice! I will try and report back
Sent from my Galaxy Nexus using xda premium
Hemulen said:
Nice! I will try and report back
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thanks
Sent from my Galaxy Nexus using Tapatalk 2
Thank you for the new rom!
You should maybe add a brief instruction on how to flash & (for later) update, for the less experienced users.
Vangelis13 said:
Thank you for the new rom!
You should maybe add a brief instruction on how to flash & (for later) update, for the less experienced users.
Click to expand...
Click to collapse
Good suggestion. I will add those today when i get home.
I did the OP in a little hurry si it needs some reconstruction anyway
Have you tested the build?
Sent from my Galaxy Nexus using Tapatalk 2
Glad to see finnish rom builders here. Maybe i will test it.
Cleaned the op a little bit
great to see another kang .
testing now
im here too u know, i just hang out in the cdma area actually i started on xda..
swordrune10 said:
im here too u know, i just hang out in the cdma area actually i started on xda..
Click to expand...
Click to collapse
nice!
Downloading.
Pitäähän sitä kokeilla. Saunan jälkeen...
EsPeHil said:
Downloading.
Pitäähän sitä kokeilla. Saunan jälkeen...
Click to expand...
Click to collapse
True true
Kai otit myös olutta?
Not bad. Everything works so far. Battery didn't drop at all during the night.
Building a new build...should be out in an hour..
New Build up on OP
This build of CM10 will only keep up with what is actually merged into the code for CM10. Primarily this was made because of how infrequent the building goes with the official nightlies, but now i continue on regardless of anything...
Code:
We are not responsible if you brick your phone, for any bugs in the rom,
or if your cat decides to eat your phone because its now full of awesome.
This build is very much identical with the official build, u can switch from official and my build without any fear of having to wipe your phone.. the only difference is that i have the build script change the cyanogenmod version to more reflect like a nightly
I'll start build in the evenings, probably take a little bit depending on how much is new and the real wait is me actually uploading it.. (I have terrible upload speeds!)
Known Issues:
None
Instructions:
Download rom
Go to recovery
Wipe rom if coming from another rom, u dont have to wipe if ur coming from official nightly
Flash rom
Flash gapps, this u dont have to do every time just when u first come to the rom (the rom backs up gapps)
Boot into rom
???
Profit!
Current and older builds can be found here: http://code.google.com/p/team-keyblade/downloads/list
Latest GAPPS: official gapps
Aternate gapps that will sync gallery to picasa if you need this, but you will lose some CM features in camera and other apps. First gapps link is recommended by Cyanogenmod and kalimichoaz(official Maguro cm dev): alternate gapps
To all people saying thanks: Your welcome!! =^_^=
Reserved just in case...
First......
Two...I respect your work.
aish_varya said:
First......
Click to expand...
Click to collapse
:laugh::laugh::laugh::laugh::laugh::laugh::silly:
sorry, but you just said you are responsable for our devices? in the case we brick it..... correct the op.
What's the difference with other nightlies?
Madflapjack said:
sorry, but you just said you are responsable for our devices? in the case we brick it..... correct the op.
Click to expand...
Click to collapse
Fixed...Sorry for the typo. I appreciate you pointing out the error of my ways. I love how peacefully and kindly you did it too.
He4dShOt said:
What's the difference with other nightlies?
Click to expand...
Click to collapse
All this is, is stock CM10. No additions, no themes and no additional tweaks. We build this because before there are nightlies, the builds are few and far between. We will build on a daily basis so whatever is merged into the CM code will be in our Rom. It is interchangeable with the "Official" CM10 Rom and can be flashed with just a cache and dalvick cache wipe if coming from the "Official" CM team build.
Please let me know if you have any problems with Google + and Google Talk Force Closing. I just found out that I am having this problem and am trying a full wipe with the latest GAPPS. If you are having this problem we will find a different GAPPS that will work.
Camera not working... First it freezes asking if I want to close it. Then a FC. Talk keeps dying as well ...
Sent from my Galaxy Nexus using Tapatalk 2
Skype also fails to log in. Keeps saying it force closed and asking me if I want to try again.
Sent from my Galaxy Nexus using Tapatalk 2
GPS is not working. Talk force closing. G+ seems ok
I'm having the same problems guys and gals. I'll try to have a working build tmrw. Everything works great but those few things.
Sent from my Nexus 7 using xda premium
New build at link in OP. GPS, gtalk, G+ and camera all working now. Please let me know if you find anymore bugs. I have tested themes, camera, gtalk, phone, messaging and gps. It should work great!
Today's build is up. Use link in OP. There's been a lot of work since yesterday's build. Sorry for the lack of a changelog, but you can check the commits here: http://review.cyanogenmod.com/#/q/status:merged,n,z
So if I install this I won't have to wipe all my apps and settings to upgrade when the official cm10 is released? That's my biggest concern... I hate having to redo all my settings! I don't know how so many people are okay with switching roms so much when you have to do that. Gets very tiresome...
I just want to run something I can stick with that continues to get updates without me having to worry about doing another full wipe in the future
Sent from my Galaxy Nexus using xda app-developers app
colonelcack said:
So if I install this I won't have to wipe all my apps and settings to upgrade when the official cm10 is released? That's my biggest concern... I hate having to redo all my settings! I don't know how so many people are okay with switching roms so much when you have to do that. Gets very tiresome...
I just want to run something I can stick with that continues to get updates without me having to worry about doing another full wipe in the future
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
yep! that's one of the reasons we do pure cm10 builds.. no wiping!
Sent from my Galaxy Nexus using Tapatalk 2
Changelog
8/7/12
Trebuchet: AppWidgetResizeFrame: Allow resizing to any size
Trebuchet: Preferences: Auto-rotate screen
Trebuchet: CM Preferences Category
Trebuchet: Preferences: Grid Size
kernel: offline charging fix
I use rafael salas version of cm10,but his rom does not contain trebuchet launcher,could you please share trebuchet launcher?
Thanks in advance.
Sent from my Galaxy Nexus using Tapatalk 2
Is this ROM still active? I just started using it on my sprint nexus but there doesn't seem to be much activity here.
Foreword
Disclaimer: I take no credit for this rom. This CM10 Nightly was developed by a developer named "WFLSL" who posted his work on a Chinese forum called "fengbao.com" (Original link: http://bbs.fengbao.com/forum.php?mod=viewthread&tid=1219102)
Warning: I am not responsible for any outcomes made by this rom. Install this rom only if you agree that flashing a non-stock rom could result in bricking your your phone, meaning that your phone may be permanently non-functional.
WFLSL, the developer of this rom has been maintaining continuous works in making CM10 available for all LU6200 users, but because he only posted his work on that Chinese website, not many people from other countries know about it.
It is virtually impossible for users who do not speak Chinese to register and use Fengbao.com. Even if you somehow figure out how to register, you won't be able to continue because you can't get the download link which is only revealed upon posting a comment. To post a comment on Fengbao.com, you need to enter a captcha code in Chinese. Obviously most of international users do not know how to read and type in Chinese.
That's why I decided to start this thread to keep you guys with up-to-date CM10 available for our device.
Again I take no credit for this rom. I am not a native Chinese speaker. I am a Korean who just luckily know how to read the Chinese captcha code and enter it. All the thanks should be forwarded to "wflsl" for his great work.
Please note that I may not be able to update this thread as often as you all want me to, but I will try my best.
If there's any problem, moderators can delete this thread. It's 100% okay with me.
CM10 Nightlies for LU6200
This is CM10 Nightly created for LU6200 by WFLSL. (http://bbs.fengbao.com/thread-1181592-1-1.html) My guess is (because I do not fully understand the original post in the Chinese forum) that WFLSL made this rom by porting CM10 for p930. I believe he mentioned that the change log basically follows that of p930.
There are no special modifications or special features other than CM10 stock features. However, I made very simple and minor modifications to this rom 1) to make it more stockish and 2) to fill things that are missing.
1. removed Chinese keyboard.
2. removed Chinese-localized Root Explorer
3. removed an app called 'Rebooter'
4. modified build.prop to change the default language and location to English and US. WFLSL made this default since the December build.
5. removed a script that reboots the device after installing the rom.
6. removed unnecessary server lists in hosts file under system\etc\. This caused issues in using Play Store and some Google services.
7. modified [init.qcom.post_boot.sh] under system\etc\. to make mpdecision and thermald work on LU6200. See the following codes. Texts in red has been added. WFLSL made this default since the December build. So this change is now there already.
Code:
# Post-setup services
case "$target" in
"msm8660_surf" | "msm8660_csfb" | "i_atnt" | "hdk_8x60" | "i_skt" | "i_dcm" | "p930" | "su640"[B][COLOR="Red"] | "lu6200"[/COLOR][/B])
start mpdecision
start thermald
;;
esac
Also in the same file, I changed the following value from 0 to 1. When this is 0, the back light of the touch buttons (menu / home / back) does not work. If you prefer to keep them off, open up this file using Root Explorer or the likes and change the value back to 0.
Code:
echo [B][COLOR="Red"]1[/COLOR][/B] > /sys/class/leds/button-backlight/max_brightness
Installation Instruction
1. Boot into CWM.
2. Back up your current rom.
3. Full wipe. (If you are coming from a previous version of this rom, just wipe cache and dalvik cache.)
4. Install the downloaded rom.
5. Install Gapps : http://goo.im/gapps/gapps-jb-20121011-signed.zip
6. Reboot
Download Link
20121125 (Nov 25, 2012) : https://docs.google.com/open?id=0BwyI4fyzvGBsSmpkdmRhczlzWE0
20121129 (Nov 29, 2012) : https://docs.google.com/open?id=0BwyI4fyzvGBsc1c3UjFXcC0tNHM
20121213 (Dec 13, 2012) : https://docs.google.com/open?id=0BwyI4fyzvGBsQjZqWW5IOXlNTGM
(I will keep the most recent 3 builds under my shared Google Docs folder. Please do not ask for older builds.)
Change Log
http://changelog.bbqdroid.org/#p930/cm10
Issues
- If you find your home button does not work after flashing a new rom, you probably flashed wrong Gapps. (Flashing Gapps for Android 4.2 will cause this.) To solve this problem, flash the correct one linked above. If this doesn't fix, factory-wipe your phone, format system, then flash CM10 and gapps.
- Some reported (including myself) that recording 1080p with stock camera is problematic.
Again, I am not the developer of this rom. If you find a bug and can speak Chinese, please visit the original developer's page and report there. My support will be very very limited because I am not a developer at all. (Original link: http://bbs.fengbao.com/forum.php?mod=viewthread&tid=1219102)
Thank You
Thanks for your great effort mate in bringing this out for us.
Thank you for sharing this and thank you for the changes you made. Those are the usual changes I do in all the ROMs I use. Thank you for saving me the trouble.
TQ for this rom. it's stable so far
Wow first time for JB
Thanks a lot for the work.
mac20dnangel said:
Thanks for your great effort mate in bringing this out for us.
But I am releasing the Stable build of CM10 for LU6200.
You may search for it.
Optibean RC2
Click to expand...
Click to collapse
And thank you too, and to be honest (and not hopefully not being offensive) Optibean has too many other things you have added (like HoloLauncher), some users might not want it and don't want to mess with /system/apps/. So a clean ROM like this one might actually help.
Thank You
maddie said:
Thanks a lot for the work.
And thank you too, and to be honest (and not hopefully not being offensive) Optibean has too many other things you have added (like HoloLauncher), some users might not want it and don't want to mess with /system/apps/. So a clean ROM like this one might actually help.
Click to expand...
Click to collapse
Thank you for the support and suggestions. By the way OptiBean will be release in three diff. files:
1st - A clean slate ROM
2nd- A Medium ROM [Minimal Add-ons] Around 200mb size
2nd - Heavy ROM [Lots of System Add-on Apps]
That will be its next release.
Holo launcher was removed and replaced by the latest Trebuchet launcher and some optimization has been made with the ROM.
Hope you will like the next release of Optibean.
PS: Sorry for my bad english
thank you
can you bring new download link : 2012-11-23
http://bbs.fengbao.com/forum.php?mo...&extra=page=1&filter=sortid&sortid=2&sortid=2
this rom draining my battery so fast T T
Sent from my LG-lu6200 using xda premium
Thanks, will give it a try.
SHaDoHaCK said:
thank you
can you bring new download link : 2012-11-23
http://bbs.fengbao.com/forum.php?mo...&extra=page=1&filter=sortid&sortid=2&sortid=2
Click to expand...
Click to collapse
Though the title said so, the uploaded file was Nov 21 version. However, I just noticed there was another update yesterday. I will try to review the rom and upload it soon.
mac20dnangel said:
Thank you for the support and suggestions. By the way OptiBean will be release in three diff. files:
1st - A clean slate ROM
2nd- A Medium ROM [Minimal Add-ons] Around 200mb size
2nd - Heavy ROM [Lots of System Add-on Apps]
That will be its next release.
Holo launcher was removed and replaced by the latest Trebuchet launcher and some optimization has been made with the ROM.
Hope you will like the next release of Optibean.
PS: Sorry for my bad english
Click to expand...
Click to collapse
Thanks for the great effort you make.
I will try to keep this thread until it is not needed any more. (Like you said you are uploading the clean CM10 too)
iamdos said:
this rom draining my battery so fast T T
Sent from my LG-lu6200 using xda premium
Click to expand...
Click to collapse
Try to turn off wifi when you are not using it. I get average of 1.5% drain if I don't use the phone.
If I leave the wifi on, I also get bad battery life.
If you encounter some ghosting effect (graphic issues) in games like Dead Trigger, try to check "Disable HW overlays" option in Developer options (Settings). this solved my graphic issues.
Everything else is smooth and fast. Battery drains a little faster but tolerable. All in all a great ROM.
The best part is, the original poster gives a full detail of what he changed and never claims the ROM as his release and gives full credit to original developer.
This just replaced MIUI on my phone.
it's hard to off wifi ^,6
Sent from my LG-LU6200 using xda premium
iamdos said:
it's hard to off wifi ^,6
Sent from my LG-LU6200 using xda premium
Click to expand...
Click to collapse
I use profile apps to automatically disablle/enable wifi/bluetooth/gps/etc based on time/schedule.
Just posted 20121125 build. (Same minor modification applied.)
There seem to be very minor changes according to the change log. If you are happy with 1121 build, you can skip this one in my opinion.
One thing I did notice was that the original developer, WFLSL, inserted a new 'hosts' file under system / etc folder. There're a bunch of server lists for Google services, and I am not sure what they are for. (These weren't there in 1121 build.) If you encounter any problem while web browsing or using any Google services, open 'hosts' file and delete everything after the first 2 lines as shown below, save the changes, and reboot.
Code:
#local
127.0.0.1 localhost
i just flashed version 20121125
only 1 problem is play store doesn't load any images T T
try to uninstall latest version 3.10.x the one that come along with this rom
to be older version of 3.9.x but still the same T T
Edited: just notice pins2u said above...i changed hosts file as you said and it's okay now TQ
iamdos said:
i just flashed version 20121125
only 1 problem is play store doesn't load any images T T
try to uninstall latest version 3.10.x the one that come along with this rom
to be older version of 3.9.x but still the same T T
Click to expand...
Click to collapse
I think it's not because of the play store, but the file called "hosts" located in system/etc.
Please follow the procedure below.
Open the file with root explorer. You will see bunches of lines.
Delete everything except for the first 2 lines.
It should have only 2 lines as shown below.
Code:
#local
127.0.0.1 localhost
Save it and reboot.
See if it helps. I haven't test the rom myself yet, but will report back when I do.
iamdos said:
Edited: just notice pins2u said above...i changed hosts file as you said and it's okay now TQ
Click to expand...
Click to collapse
Okay, that's great. I will update the rom tomorrow.
Update: New link for 20121125 build with reverted hosts file has been posted.
.
pins2u said:
Foreword
Disclaimer: I take no credit for this rom. This CM10 Nightly was developed by a developer named "WFLSL" who posted his work on a Chinese forum called "fengbao.com" (Original link: http://bbs.fengbao.com/thread-1181592-1-1.html)
Warning: I am not responsible for any outcomes made by this rom. Install this rom only if you agree that flashing a non-stock rom could result in bricking your your phone, meaning that your phone may be permanently non-functional.
WFLSL, the developer of this rom has been maintaining continuous works in making CM10 available for all LU6200 users, but because he only posted his work on that Chinese website, not many people from other countries know about it.
It is virtually impossible for users who do not speak Chinese to register and use Fengbao.com. Even if you somehow figure out how to register, you won't be able to continue because you can't get the download link which is only revealed upon posting a comment. To post a comment on Fengbao.com, you need to enter a captcha code in Chinese. Obviously most of international users do not know how to read and type in Chinese.
That's why I decided to start this thread to keep you guys with up-to-date CM10 available for our device.
Again I take no credit for this rom. I am not a native Chinese speaker. I am a Korean who just luckily know how to read the Chinese captcha code and enter it. All the thanks should be forwarded to "wflsl" for his great work.
Please note that I may not be able to update this thread as often as you all want me to, but I will try my best.
If there's any problem, moderators can delete this thread. It's 100% okay with me.
CM10 Nightlies for LU6200
This is CM10 Nightly created for LU6200 by WFLSL. (http://bbs.fengbao.com/thread-1181592-1-1.html) My guess is (because I do not fully understand the original post in the Chinese forum) that WFLSL made this rom by porting CM10 for p930. I believe he mentioned that the change log basically follows that of p930.
There are no special modifications or special features other than CM10 stock features. However, I made very simple and minor modifications to this rom 1) to make it more stockish and 2) to fill things that are missing.
1. removed Chinese keyboard.
2. removed Chinese-localized Root Explorer
3. removed an app called 'Rebooter'
4. modified build.prop to change the default language and location to English and US.
5. removed a script that reboots the device after installing the rom.
6. removed unnecessary server lists in hosts file under system\etc\. This caused issues in using Play Store and some Google services.
7. modified [init.qcom.post_boot.sh] under system\etc\. to make mpdecision and thermald work on LU6200. See the following codes. Texts in red has been added.
Code:
# Post-setup services
case "$target" in
"msm8660_surf" | "msm8660_csfb" | "i_atnt" | "hdk_8x60" | "i_skt" | "i_dcm" | "p930" | "su640"[B][COLOR="Red"] | "lu6200"[/COLOR][/B])
start mpdecision
start thermald
;;
esac
Also in the same file, I changed the following value from 0 to 1. When this is 0, the back light of the touch buttons (menu / home / back) does not work. If you prefer to keep them off, open up this file using Root Explorer or the likes and change the value back to 0.
Code:
echo [B][COLOR="Red"]1[/COLOR][/B] > /sys/class/leds/button-backlight/max_brightness
Installation Instruction
1. Boot into CWM.
2. Back up your current rom.
3. Full wipe. (If you are coming from a previous version of this rom, just wipe cache and dalvik cache.)
4. Install the downloaded rom.
5. Install Gapps : http://goo.im/gapps/gapps-jb-20121011-signed.zip
6. Reboot
Download Link
20121121 (Nov 21, 2012) : https://docs.google.com/open?id=0BwyI4fyzvGBsdGdMaUhPellPbFk
20121125 (Nov 25, 2012) : https://docs.google.com/open?id=0BwyI4fyzvGBsSmpkdmRhczlzWE0 (updated)
(I will keep the most recent 3 builds under my shared Google Docs folder. Please do not ask for older builds.)
Change Log
http://changelog.bbqdroid.org/#p930/cm10
Again, I am not the developer of this rom. If you find a bug and can speak Chinese, please visit the original developer's page and report there. My support will be very very limited because I am not a developer at all. (Original link: http://bbs.fengbao.com/thread-1181592-1-1.html)
Click to expand...
Click to collapse
Hi.
Download Links not work,can you please upload new Download Link?
Link for version 20121125 (https://docs.google.com/file/d/0BwyI4fyzvGBsSmpkdmRhczlzWE0/edit?pli=1) still works. I just tried.
Good Morning fellow XDAers.
Here is a Pure AOSP KitKat build pulled from Google source found HERE
I will try to keep this updated with most recent source builds and minor tweaks. This makes for a good base for anyone to build from for a pure AOSP source. Just wanted to get it out there for people to use.
Instructions.
It is highly recommended that you flash using CWM recovery. TWRP may be updated but I haven't used it since KitKat released Again, if you brick your device, it's your fault not mine. This is a Beta so by clicking the download links you are taking full responsibility.
*Backup your current ROM
*Make sure you are using CWM recovery
*Do a complete system wipe
*Flash Rom
*Flash Gapps
*Flash Superuser pack
*Reboot and enjoy
Update 12/18
* enabled app ops - ability to specify which permissions you want to turn on/off for each app
* increased email attachments allowance to 20mb
* any file type transfer thru Bluetooth
* closed some memory leaks
* art tweaks
* animation cut in half for stock launcher
* up to date with Google merges via android-review.googlesource.com
Download aosp_manta-KOT49H-20131218 HERE
Update 12/15
* Added OTG Support
* Added merges from android source that wasn't in 4.4.2
* More location tweaks
* Added Override allowance in source
* Changed to toolchain 4.8
* Build.prop tweaks
* You can dirty flash over previous versions, just make sure to flash gapps, then SU to retain root.
Download aosp_manta-KOT49H-20131215 HERE
Update 12/12
* Updated to 4.4.2
Download v1.6 HERE
Update 11/22
* Pie controls in Browser enabled
* doubled the allowed downloads
Download v1.5.1 HERE
Update 11/21
* Updated to 4.4 r1.2 source
* Updated Kernel
* Updated Props
* Disabled Securities in Email (please test)
Download v1.5 HERE
Update 11/17
* added reboot menu
* added screenshot to reboot menu
Download v1.4 HERE
Update 11/14 (Pure AOSP Manta 4.4 r1.1)
Download ROM from HERE
Needs testing but youtube works through the browser fine. Please make sure you have a fresh wipe, then flash rom, gapps, su, reboot. Also, you may experience gapps fc if you enable ART. Since it is still ART is still experimental, I would hold off of that for now.
My keyboard doesnt pop up any longer using the new googlehome.apk. it took a little bit to settle down but if you have the issue either deal with the glitch or delete the apk from /system/app
Alpha upload 11/11
Download ROM from HERE
Download 4.4 Gapps from HERE 4.4.2 Gapps from HERE
Download SU from HERE
Thanks to a good buddy for motivating me to even get back in to compiling and messing with source. It's been awhile. Could the retirement be over? not likely. But you never know. Once Google releases the updated props I will update the OP.
Enjoy!
Don't be cheap. If you download hit the thanks button. It's free!
Just in case for apps or mods
you never know if a third is needed
Decided to put it out there eh?
Did you enable transparency in this build?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Noobla_Khan said:
Decided to put it out there eh?
Did you enable transparency in this build?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
Yeah, transparency is done, and some other low level tweaks. Over all it's very good. We really need the props released to finish the build correctly.
Leoisright said:
Yeah, transparency is done, and some other low level tweaks. Over all it's very good. We really need the props released to finish the build correctly.
Click to expand...
Click to collapse
Cool...I don't think SlimKat or CM11 builds had the transparency enabled(may have changed since I last tried them) so this would be good way for people to check that out since the word is it won't be enabled on the Nexus 10 when Google releases.
Noobla_Khan said:
Cool...I don't think SlimKat or CM11 builds had the transparency enabled(may have changed since I last tried them) so this would be good way for people to check that out since the word is it won't be enabled on the Nexus 10 when Google releases.
Click to expand...
Click to collapse
I better double check. If it isnt I will fix and upload. I thought I did it but was a late night...lol
edit.. it wasn't done. But it's being uploaded right now with it done. Also, swapped out to have the stock native wallpaper_default.jpg. Should be done in less then 10 minutes and will update the op after.
Hoping to have fixed the USB OTG problem too.
Sent from my SPH-L900 using XDA Premium HD app
Thanks for your work! Sounds like the official 4.4 is rolling out already. Looking forward to the final product!
It would be nice to get the binaries so we can have a proper AOSP build.
I will be working on this tomorrow afternoon. Got the ota updated and system pulled. Now that we have full props we can polish off this aosp. You'd be surprised how similar this really was. Hope the props fix the video glitches.
Sent from my Nexus 10 using XDA Premium HD app
looking forward to this! thanks
Art working well on this build using the odex gapps
Sent from my One using XDA Premium HD app
4.4 binaries have been posted by google. I should have a release sunday. Couple busy days ahead. Have the reboot to recovery working but once I added a system pull binaries it wouldnt boot. So need to dig in to see if we need a new kernel. Either way good days ahead.
edit: Ok, factory images have been released for us. But, there is also a new build tag for the manta. Will be release 4.4 r1.1. It contains a different kernel as suspected. SInce this is the case, I decided to just start fresh with a new sync.
Sent from my SPH-L900 using XDA Premium HD app
Woohoo, we have a full booted pure aosp 4.4 r1.1
Will post link in op..give me a few
Edit..Youtube app works great. Now the fun begins. I want to keep this as close to pure as possible. The 4-1 reboot menu and OTG is a must. but then just transitions and stuff like that. Have fun with the rom gang.
Leoisright said:
Woohoo, we have a full booted pure aosp 4.4 r1.1
Will post link in op..give me a few
Edit..Youtube app works great. Now the fun begins. I want to keep this as close to pure as possible. The 4-1 reboot menu and OTG is a must. but then just transitions and stuff like that. Have fun with the rom gang.
Click to expand...
Click to collapse
Is the ROM still in Alpha status?
jackie_jagger said:
Is the ROM still in Alpha status?
Click to expand...
Click to collapse
I think we can move it up a couple notches. All the apps work now. Transparency Nav bar modded
Sent from my Nexus 10 using XDA Premium HD app
Leoisright said:
I think we can move it up a couple notches. All the apps work now. Transparency Nav bar modded
Sent from my Nexus 10 using XDA Premium HD app
Click to expand...
Click to collapse
Gotchya, I'll give it a shot once Mediafire starts working. It seems to be down for maintenance. If I may ask, how does the performance compare to 4.3? I ask because I'm hearing conflicting reports of being fast and the same for some.
EDIT: It won't work on TWRP?
jackie_jagger said:
Gotchya, I'll give it a shot once Mediafire starts working. It seems to be down for maintenance. If I may ask, how does the performance compare to 4.3? I ask because I'm hearing conflicting reports of being fast and the same for some.
Click to expand...
Click to collapse
I think with ART vs dalvik there seems to be a boost. It runs smooth as silk. Also, I have Google home installed and it settled down now where the keyboard stops popping up when you hit the home button.
Only think I see not working so far is the tap n pay in settings. Says services not installed.
Even the print seems good once you install an HP print app. Synced right up to my printer. Its work a full wipe then flash ROM, gapps, and then su. Make sure you back up. But I wanted a fresh install for KitKat anyway.
Edit... I don't think twrp updated the recovery yet for KitKat. Use a cwm 6.0.4 version and its golden
Sent from my Nexus 10 using XDA Premium HD app
I just installed this about 30 minutes ago and so far its running great. I am using ART instead of Dalvik and it runs really well and smooth. There was only a small sluggishness to it for me when I would go left to Google Now, but after using it for a little while it seems to have gotten better.
Youtube worked awesome and so has everything else, Gmail, Chrome, Google Plus, etc. The transparency looks amazing on this tablet, great job!! As of right now this rom's a keeper for me.
Edit* I also installed this with the newest CWM. I tried using TWRP yesterday on a few other 4.4 roms and it would fail each time.
Leoisright said:
I think with ART vs dalvik there seems to be a boost. It runs smooth as silk. Also, I have Google home installed and it settled down now where the keyboard stops popping up when you hit the home button.
Only think I see not working so far is the tap n pay in settings. Says services not installed.
Even the print seems good once you install an HP print app. Synced right up to my printer. Its work a full wipe then flash ROM, gapps, and then su. Make sure you back up. But I wanted a fresh install for KitKat anyway.
Edit... I don't think twrp updated the recovery yet for KitKat. Use a cwm 6.0.4 version and its golden
Sent from my Nexus 10 using XDA Premium HD app
Click to expand...
Click to collapse
I'm running TWRP recovery on my Nexus 5 so I guess it does work. But I'm not sure if there is an updated image available for manta. I'll check it and try