[ROM] Manta [KOT49H] 4.4.2 r1 Pure AOSP [12/18/13] - Nexus 10 Android Development

Good Morning fellow XDAers.
Here is a Pure AOSP KitKat build pulled from Google source found HERE
I will try to keep this updated with most recent source builds and minor tweaks. This makes for a good base for anyone to build from for a pure AOSP source. Just wanted to get it out there for people to use.
Instructions.
It is highly recommended that you flash using CWM recovery. TWRP may be updated but I haven't used it since KitKat released Again, if you brick your device, it's your fault not mine. This is a Beta so by clicking the download links you are taking full responsibility.
*Backup your current ROM
*Make sure you are using CWM recovery
*Do a complete system wipe
*Flash Rom
*Flash Gapps
*Flash Superuser pack
*Reboot and enjoy
Update 12/18
* enabled app ops - ability to specify which permissions you want to turn on/off for each app
* increased email attachments allowance to 20mb
* any file type transfer thru Bluetooth
* closed some memory leaks
* art tweaks
* animation cut in half for stock launcher
* up to date with Google merges via android-review.googlesource.com
Download aosp_manta-KOT49H-20131218 HERE
Update 12/15
* Added OTG Support
* Added merges from android source that wasn't in 4.4.2
* More location tweaks
* Added Override allowance in source
* Changed to toolchain 4.8
* Build.prop tweaks
* You can dirty flash over previous versions, just make sure to flash gapps, then SU to retain root.
Download aosp_manta-KOT49H-20131215 HERE
Update 12/12
* Updated to 4.4.2
Download v1.6 HERE
Update 11/22
* Pie controls in Browser enabled
* doubled the allowed downloads
Download v1.5.1 HERE
Update 11/21
* Updated to 4.4 r1.2 source
* Updated Kernel
* Updated Props
* Disabled Securities in Email (please test)
Download v1.5 HERE
Update 11/17
* added reboot menu
* added screenshot to reboot menu
Download v1.4 HERE
Update 11/14 (Pure AOSP Manta 4.4 r1.1)
Download ROM from HERE
Needs testing but youtube works through the browser fine. Please make sure you have a fresh wipe, then flash rom, gapps, su, reboot. Also, you may experience gapps fc if you enable ART. Since it is still ART is still experimental, I would hold off of that for now.
My keyboard doesnt pop up any longer using the new googlehome.apk. it took a little bit to settle down but if you have the issue either deal with the glitch or delete the apk from /system/app
Alpha upload 11/11
Download ROM from HERE
Download 4.4 Gapps from HERE 4.4.2 Gapps from HERE
Download SU from HERE
Thanks to a good buddy for motivating me to even get back in to compiling and messing with source. It's been awhile. Could the retirement be over? not likely. But you never know. Once Google releases the updated props I will update the OP.
Enjoy!
Don't be cheap. If you download hit the thanks button. It's free!

Just in case for apps or mods

you never know if a third is needed

Decided to put it out there eh?
Did you enable transparency in this build?
Sent from my SAMSUNG-SGH-I337 using Tapatalk

Noobla_Khan said:
Decided to put it out there eh?
Did you enable transparency in this build?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
Yeah, transparency is done, and some other low level tweaks. Over all it's very good. We really need the props released to finish the build correctly.

Leoisright said:
Yeah, transparency is done, and some other low level tweaks. Over all it's very good. We really need the props released to finish the build correctly.
Click to expand...
Click to collapse
Cool...I don't think SlimKat or CM11 builds had the transparency enabled(may have changed since I last tried them) so this would be good way for people to check that out since the word is it won't be enabled on the Nexus 10 when Google releases.

Noobla_Khan said:
Cool...I don't think SlimKat or CM11 builds had the transparency enabled(may have changed since I last tried them) so this would be good way for people to check that out since the word is it won't be enabled on the Nexus 10 when Google releases.
Click to expand...
Click to collapse
I better double check. If it isnt I will fix and upload. I thought I did it but was a late night...lol
edit.. it wasn't done. But it's being uploaded right now with it done. Also, swapped out to have the stock native wallpaper_default.jpg. Should be done in less then 10 minutes and will update the op after.
Hoping to have fixed the USB OTG problem too.
Sent from my SPH-L900 using XDA Premium HD app

Thanks for your work! Sounds like the official 4.4 is rolling out already. Looking forward to the final product!

It would be nice to get the binaries so we can have a proper AOSP build.

I will be working on this tomorrow afternoon. Got the ota updated and system pulled. Now that we have full props we can polish off this aosp. You'd be surprised how similar this really was. Hope the props fix the video glitches.
Sent from my Nexus 10 using XDA Premium HD app

looking forward to this! thanks

Art working well on this build using the odex gapps
Sent from my One using XDA Premium HD app

4.4 binaries have been posted by google. I should have a release sunday. Couple busy days ahead. Have the reboot to recovery working but once I added a system pull binaries it wouldnt boot. So need to dig in to see if we need a new kernel. Either way good days ahead.
edit: Ok, factory images have been released for us. But, there is also a new build tag for the manta. Will be release 4.4 r1.1. It contains a different kernel as suspected. SInce this is the case, I decided to just start fresh with a new sync.
Sent from my SPH-L900 using XDA Premium HD app

Woohoo, we have a full booted pure aosp 4.4 r1.1
Will post link in op..give me a few
Edit..Youtube app works great. Now the fun begins. I want to keep this as close to pure as possible. The 4-1 reboot menu and OTG is a must. but then just transitions and stuff like that. Have fun with the rom gang.

Leoisright said:
Woohoo, we have a full booted pure aosp 4.4 r1.1
Will post link in op..give me a few
Edit..Youtube app works great. Now the fun begins. I want to keep this as close to pure as possible. The 4-1 reboot menu and OTG is a must. but then just transitions and stuff like that. Have fun with the rom gang.
Click to expand...
Click to collapse
Is the ROM still in Alpha status?

jackie_jagger said:
Is the ROM still in Alpha status?
Click to expand...
Click to collapse
I think we can move it up a couple notches. All the apps work now. Transparency Nav bar modded
Sent from my Nexus 10 using XDA Premium HD app

Leoisright said:
I think we can move it up a couple notches. All the apps work now. Transparency Nav bar modded
Sent from my Nexus 10 using XDA Premium HD app
Click to expand...
Click to collapse
Gotchya, I'll give it a shot once Mediafire starts working. It seems to be down for maintenance. If I may ask, how does the performance compare to 4.3? I ask because I'm hearing conflicting reports of being fast and the same for some.
EDIT: It won't work on TWRP?

jackie_jagger said:
Gotchya, I'll give it a shot once Mediafire starts working. It seems to be down for maintenance. If I may ask, how does the performance compare to 4.3? I ask because I'm hearing conflicting reports of being fast and the same for some.
Click to expand...
Click to collapse
I think with ART vs dalvik there seems to be a boost. It runs smooth as silk. Also, I have Google home installed and it settled down now where the keyboard stops popping up when you hit the home button.
Only think I see not working so far is the tap n pay in settings. Says services not installed.
Even the print seems good once you install an HP print app. Synced right up to my printer. Its work a full wipe then flash ROM, gapps, and then su. Make sure you back up. But I wanted a fresh install for KitKat anyway.
Edit... I don't think twrp updated the recovery yet for KitKat. Use a cwm 6.0.4 version and its golden
Sent from my Nexus 10 using XDA Premium HD app

I just installed this about 30 minutes ago and so far its running great. I am using ART instead of Dalvik and it runs really well and smooth. There was only a small sluggishness to it for me when I would go left to Google Now, but after using it for a little while it seems to have gotten better.
Youtube worked awesome and so has everything else, Gmail, Chrome, Google Plus, etc. The transparency looks amazing on this tablet, great job!! As of right now this rom's a keeper for me.
Edit* I also installed this with the newest CWM. I tried using TWRP yesterday on a few other 4.4 roms and it would fail each time.

Leoisright said:
I think with ART vs dalvik there seems to be a boost. It runs smooth as silk. Also, I have Google home installed and it settled down now where the keyboard stops popping up when you hit the home button.
Only think I see not working so far is the tap n pay in settings. Says services not installed.
Even the print seems good once you install an HP print app. Synced right up to my printer. Its work a full wipe then flash ROM, gapps, and then su. Make sure you back up. But I wanted a fresh install for KitKat anyway.
Edit... I don't think twrp updated the recovery yet for KitKat. Use a cwm 6.0.4 version and its golden
Sent from my Nexus 10 using XDA Premium HD app
Click to expand...
Click to collapse
I'm running TWRP recovery on my Nexus 5 so I guess it does work. But I'm not sure if there is an updated image available for manta. I'll check it and try

Related

[ROM]CM7-Hybrid-V1.0 [01/11/2012]

*WARNING! I Am Not Responsible For Anything That Happens To Your Device*
.::†Romans 10:9†::.
"...By their fruits ye shall know them."
Sharing is Caring​
DEVS
RoyalKnight6190
Testers
pyraxiate
br00x
jr_718
MightyMike889
Graphics
akashptl
Phoenix6
DARKSIDE Server
emmdub
Team IRC
Freenode
Coming soon​-------------------------------------------------------------------------
CM7-Hybrid
CM7-Hybrid is built and compiled from CM7 source code with lots of the CM7 extras and other assorted bloatery removed + a custom kernel & numerous tweaks and optimizations added in. It's sleak, it's mean, and it's fast.
Thank you to: Infinitybiff, XxKolohexX, ChromerSmith, Kingklick, Firerat, Cyanogen, HTC, Samsung, Google, Dumfuq, Houka420, The Entire CM Team and contributors and of course the guy that made this all possible JesusFreke. We wouldnt be where we are now if it wasnt for him.​
=============================================
Release Name: CM7-Hybrid
Release Version: V. 1.0
Proprietary Files used from: Slayhers CM7 Build - Thank You so Much!!!
Base Firmware: 2.3.7
Kernel Verison: Synergy CyanogenMod 7 Edition V0.03.1
Recovery Required: 3.0.2.7
=============================================
INSTALL INSTRUCTIONS:
- Download the ROM
- Boot into recovery
- Wipe data
- Wipe cache partition
- Wipe dalvik cache (under advanced)
-Optional go to mounts, and go through the list formatting everything. If you format your sdcard you will loose everything on it.
- Install from zip / choose zip from SD card / flash it!!
- (optionally) You can let the phone settle for 1-2 mins on initial boot up. IF you are using setCPU, I strongly recommend a fresh reboot and a 1-2 minute settle before auto detecting clock speeds. (see below for more details)
----------------------------------------------------------------------------
Working:
DATA
WIFI
GPS
BT
Known Issues:
This is an Alpha Build, so these are the things that we found in our rigorous testing. Most these things you will not even notice during your daily use. Trust me its a daily driver still. !!Please!! dont mention/complain or gripe about these issues, yes we know they are broken and not working hence why they are listed just deal with it. You are the one that wanted to try a test build.
Call Sound doesnt work when GPS is turned off - Temp fix leave GPS on
Thank you Sammydr10, for your work finding the GPS fix for audio.
USB connection of SDcard needs to be fixed - Temp fix is use mount sdcard in recovery/use Auto Mount SD app or do not switch to internal memory in CM settings, use the sdcard (which is done by default).
Mounting of emmc - Temp fix use Root Explorer
Netflix freezes - Nothing yet
Any other launcher is having FC problems
Gallery is a bit laggy at first, and may not rotate- toggle orientation/use quickpic for gallery.
When listening to music and receiving a notification, volume does not return to previous levels- Cyanogenmod settings/Sound/Uncheck Notification Focus (mstrk242 helped with this one THANKS)
When using a lockscreen gesture to open directly to camera, the viewfinder looks all wonky and green. Enter gallery and exit and camera will look normal again.
Google music will not stream on 4g it does stream over wifi- Not sure yet.
In quickpic when when attempting to rotate an image to edit it causes force close. - Looking into it.
When using a custom app on the three ring lockscreen, selecting unlock from the middle ring causes reboot: Call your phone unlock to answer then get into settings and change lockscreen preference. Three ring lockscreen does work if you leave the custom app in the middle.
Blurry MMS: Open messaging app enter settings/Custom User Agent/Custom/Android-MMS/2.0
Kernel Info:
Thank you -Mr. X- for the great Kernel.
Kernel base: 2.6.35.13
Included Version: Synergy CyanogenMod 7 Edition V0.03.1 - CWM Flashable V0.03.1
Team Server DOWNLOAD THE ROM V1.0
Mirror Server DOWNLOAD THE ROM V1.0
DOWNLOAD THE ROM VRC1
Change-Log
Release Name: CM7-Hybrid
Release Version: v1.0
Base Firmware: 2.3.7
Kernel Verison: Synergy CyanogenMod 7 Edition V0.03.1
Recovery Required: 3.0.2.7
Rom -
Optimized every OGG file (Sound Files)
Cut rom down in size by at least 10Mb, prior to adding extras
Dalvik Cache updated to 72mb
Added Speed Tweaks
Added Battery Saving Tweaks
Added Media Tweaks
Added UI Tweaks
Apps -
Zipaligned and Optimized Every App
Added new Widget Picker
- Combines Simular widgets into one category
Added 2G Toggle Widget
Removed extra Bloatware
Removed Gmail - Install it from Marketplace
Removed Gmaps - Install it from Marketplace
Kernel -
Synergy CyanogenMod 7 Edition V0.03.1
Framework -
Zipaligned and Optimized
Overall -
Cut rom in size and made it faster
------------------------------------------------------
Change-Log
Release Name: CM7-Hybrid
Release Version: vRC1
Base Firmware: 2.3.7
Proprietary Files used from: Slayhers CM7 Rom - Thank You
Kernel Verison: Synergy CyanogenMod 7 Edition V0.03.1
Recovery Required: 3.0.2.7
Rom -
Based on Build CM7 Gingerbread 2.3.7
Added Performance Scripts
Added Gapps w/GTalk Video
Battery Saving Tweaks
Set Dalvik Cache to 64mb
Added wifi Scan settings
Set Wifi Scan to 180sec
Added DARKSIDE Dev Team Custom GPS Script
Added Roboto Font (ICS Font)
Bin -
Added Kernel speed script
Libs -
Added Gtalk video Libs
Apps -
Removed ADW
Added custom Launcher2
Zip Aligned and Optimized
Removed useless Bloatware from CM7
Themed and optimized Gingerbread Keyboard
Optimized and edited Launcher2
Added auto SDcard mount
Added Quikpic
Removed 3D Gallery (Not properly working, will put back once issues fixed)
Kernel -
Synergy CyanogenMod 7 Edition V0.03.1
Added Synergy Kernel script
Framework -
Zip aligned and Optimized
Overall -
Rom speed up and more stable
Other Stuff That I Forgot!!! or want to keep a secret.
Reserved for later
Time to start flashing!
_______
Wow Sammy! Were you waiting for this? Lol!!!
Enjoy Folks this is the good stuff.
Btw folks TDJ is ever so close to getting the device. PLEASE see my sig
raycaster3 said:
Wow Sammy! Lol Were you waiting for this? Lol!!! Enjoy Folks this is the good stuff.
Click to expand...
Click to collapse
Lol yes i was waiting for it
Sweet man nice work!
Haha I moved pages for a minute and it was up! WOOHOO!
Awesome! This may sound like a dumb question, but is there any way to update CWM for our phones? I just flashed the recovery.tar through ODIN, but I think that is only version 3.0.2.5.
Thanks again for all the hard work guys!
I'm glad you guys are here we really need some help thanks.
Sent from Samsung Galaxy S II running BeastMOD II v4.2
skadude66 said:
Awesome! This may sound like a dumb question, but is there any way to update CWM for our phones? I just flashed the recovery.tar through ODIN, but I think that is only version 3.0.2.5.
Thanks again for all the hard work guys!
Click to expand...
Click to collapse
yes, you need to update through the marketplace app.
Finally I can love my phone again (as if I ever didn't)
Sent from my SGH-T989 using xda premium
Here we go, first time flashing a rom from The Darkside. Thanks.
Powered by the SGSII....
mjeezy13947 said:
Finally I can love my phone again (as if I ever didn't)
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I am glad you can love your phone again.
ThC23 said:
Here we go, first time flashing a rom from The Darkside. Thanks.
Powered by the SGSII....
Click to expand...
Click to collapse
Welcome to the DARKSIDE, its going to be a fun ride.
skadude66 said:
Awesome! This may sound like a dumb question, but is there any way to update CWM for our phones? I just flashed the recovery.tar through ODIN, but I think that is only version 3.0.2.5.
Thanks again for all the hard work guys!
Click to expand...
Click to collapse
Should be able to update through rom manager...
Sent from my SGH-T989 using xda premium
ThC23 said:
Here we go, first time flashing a rom from The Darkside. Thanks.
Powered by the SGSII....
Click to expand...
Click to collapse
Wait for it.....Welcome to the DARKSIDE!!!
raycaster3 said:
Wait for it.....Welcome to the DARKSIDE!!!
Click to expand...
Click to collapse
I'm super stoked to try your team's stuff. Let me say first off that I am a fan of little touches. The updater-script text is very cool and so is the boot animation.
Wow. Good job guys. Still got to wait before I can download..
Sent from my HTC Glacier using xda premium
drewtang said:
Should be able to update through rom manager...
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
How? I installed ROM Manager, is it by tapping More Recoveries? It had an error with permissions.
Wait, I'm confused. Our version of CWM is 5.0.2.6, so we have nothing to update then, correct?
jr_718 said:
Wow. Good job guys. Still got to wait before I can download..
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
That sucks, sorry to hear that, it will be waiting for you when you can.
kenvan19 said:
I'm super stoked to try your team's stuff. Let me say first off that I am a fan of little touches. The updater-script text is very cool and so is the boot animation.
Click to expand...
Click to collapse
Thank you. I agree it gives it a nice look.

[ROM]ASU-JellyBean-Hydro 8 (6/29/13)Liquid Butter..- Tf300 -Official 10.6.1.15.3 Base

ASUS OFFICIAL JELLY BEAN HYDRO 8-Liquid Butter​
Whats Inside
extreme z-scrolling cache disabled
-dalvik now set to incrementally cache
(much faster!!!)
Adobe Flash 11.1
Extended Power Menu
sysctl
init.d
instant cpu on/off
instant screen resumes
boot complete rw/ro tweaks
touchscreen super sensitized
optimized sqlite
supercharger
lwp tweak
loopysmooth scrolling
fastest Jelly bean rom in town
Gpu overscaling
forced 120 fps
egl throughout
surface dithering
deodexed
Custom animation times
My painstaking trial and error build.prop
zipaligned
rooted
busybox
really gave jelly bean a run for its money
increased ram and flinger and touch
and battery life and adjusted kernel
debloated like crazy
bash
nano
and png optimized
GPU is cranked
CPU left for calculations
Fps threshold removed
Fps limit maxed
Smoooooooth and buttttery
Sweet. Melted jellybean butter candy
..
Random Thoughts
Code:
[center]
your bootloader must be unlocked
You Must Already be on Jellybean Bootloaders by now
[/center]
​
DO NOT READ THIS IN THE XDA APP OR USING TAPATALK.....READ INSTRUCTIONS ON A BROWSER IN DESKTOP VIEW
YOU MUST HAVE AN UNLOCKED BOOTLOADER
Based on 4.2.1
10.6.15.3 bootloader
How To Install
Code:
[list]
Download rom
reboot to recovery
wipe system
factory data reset
wipe cache
and dalvik
Flash rom
reboot
-Please allow proper rebooting / caching time
to clarify this is if you have ota jellybean bootloaders already only..
or some form of stock asus Jelly bean bootloader
no cm10 aokp aosp paranoid etc..
anything not ota doesnt count as jb bootloader or already running jb
[/list]
​
HYDRO 8 Base
10.4.2.20 Official Jelly bean Hydro 8 Base
http://tinyw.in/G4WB
mirror
http://d-h.st/2ct
WW Compatibility Flashable zip
(adds correct kernel, Keyboards and languages for ww Tablets , Flash once .. Right after the Base)
http://tinyw.in/2hQJ
8.2 Update (nonwipe)
http://tinyw.in/AGR3
ADDONS(RECOVERY FLASHABLE)
Bloat
Asus Apks
http://tinyw.in/zgvf
BOOTANIMATIONS
Code:
[center]
Nexus 7 GLowing x
[url]http://tinyw.in/1U5D[/url]
Asus Stock boot
[url]http://tinyw.in/yGjA[/url]
Android in space 2.0 (in space and falling Long but 50MB awesome though)
[url]http://tinyw.in/aPdg[/url]
Startrek Lcars Boot
[url]http://tinyw.in/J2tY [/url]
Hubble(Short ..black screen is normal)
[url]http://tinyw.in/ND17[/url]
Spinning jelly bean nexus 7 Windows
[url]p://tinyw.in/rgw9[/url]
From [email protected] Rom
[url]http://tinyw.in/nTQ2[/url]
Spinning Droid Eye
[url]http://tinyw.in/MyZV[/url]
Android Falling in space
[url]http://tinyw.in/nNfi[/url]
[/center]
Changelog
Code:
[list]
Thanks to elesbb
i used his framework to diff and build
and literally copied it word for word to include it
in my own version of his extended power menu
8.2
fixed extended power menu
to not rely on xposed framework any more
re did the animations and drop shadows
cleaned up within each xml edit
to be consistent with previous builds
(as far as times and values)
ongoing notifications are still to come
made a few dalvik changes
cleaned up over all lag in many places including browser
also made a 4.2.1 WW compat pack
please back up before flashing so i can be 100% sure it works
i took a fresh base of WW 4.2.1 and kernel
and re did all mods to it (deodex zipalign init.d root.busybox)
then pulled all the necessary files and zipped em up
and made a new bloat.zip for anyone missing those bloated items
Fsync is kernel related
and building a fresh kernel without fsync in my last 3 weeks
before tour
probably not going to happen
flash a different kernel
i dont have my ubuntu build env setup anymore
(wiped it and currently running my recording studio on it ) :(
Hydro 8
Updated to the latest release of 10.6.1.15.3 (4.2.1)
not sure if any bootloader will work
worst case itll only soft brick
but you atleast need to be on jelly bean bootloader
- Everything matched except shutdown menu
ongoing notifications
ww compat flash
and a few others i will finish these soon
over the next few days
im just in music land lately some very cool projects
have come my way so hang in there
-
[/list]
he's alive!!
looking forward to seeing you continue your amazing work dude!
how can we help?
lol been really busy ya know music sometimes
just consumes me
chimaira as a whole is now in the studio working on a new album
i will be probably super busy very soon
so ill get this up and done as quick as i can
and ill randomly pop in and out
bc once im gone its usually for a few months
the few lag bugs are animations that are resolved in the update
also its cacheing so give it time
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
seanzscreams said:
the few lag bugs are animations that are resolved in the update
also its cacheing so give it time
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
so you recommend to hold off installing the main ROM until the update is up?
what's the procedure? Install ROM, let it reboot, setup and then install update?
Or just install update in TWRP right after main ROM and then reboot?
zerozoneice said:
so you recommend to hold off installing the main ROM until the update is up?
what's the procedure? Install ROM, let it reboot, setup and then install update?
Or just install update in TWRP right after main ROM and then reboot?
Click to expand...
Click to collapse
nah get it up and going so by ( non wipe )update time your ready...
and still do them in seperate flashes
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
My page reloading all day finally paid off :d
the rom is for tablets ww
thanks
Enviado desde mi Transformer Pad TF300T usando Tapatalk 2
If on Asus Jb from Asus support site.. also FULL WIPE?,?????
Sent using The Beast via Tapatalk 2
I came looking for this.... very excited to see it
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
can I flash on WW too?
Worked great thanks, I had the [OFFICIAL][4.1.1] CyanogenMod 10 Nightlies installed. Oh BTW I received an System update notice when I first booted, it seems to want me to update to the latest OTA Jelly Bean. My Internal SD wasn't wiped in the process either
One last thing, everything is smooth exept I'm getting FC when opening the Asus Customized settings.
Thank you sir!
May I have another! :thumbup:
JellyBean HYDRO= Super smooth
Sent from my Nexus S 4G using Tapatalk 2
Is it compatible with TF300TG and 3G working? Couldn't find anything about it...
Thank you already in advance,
Blubberor!
Any mirrors? Says it's going to take 1.5 hours on a 55mbs connection
Sent from my SGH-T989 using xda app-developers app
Blubberor said:
Is it compatible with TF300TG and 3G working? Couldn't find anything about it...
Thank you already in advance,
Blubberor!
Click to expand...
Click to collapse
+1
Thanks Sean
anybody else getting really slow downloads? Anybody willing to mirror it?

[ROM] [AOSP] MMuzzyROM for Maguro - Jelly Bean 4.2.2 - JDQ39E

AOSP JellyBean 4.2.2. Official Source Build hot off the AOSP servers. This ROM is AOSP. The only files that were changed or added were to make things nicely functional.
Thanks to everyone for the kind words, technical help, suggestions, and for using the ROM!
This ROM is closely related to builds I make for Toro, Toroplus, Mako, Manta and Grouper.
----------------
Features include:
- Root with Superuser
- Scroll Cache disabled (kmagameguy)
- Quick Settings Mod (kevdliu)
- Enhanced Power Menu (Craig Gomez)
- Screenshot on power menu (CM)
- Expanded Desktop (CM)
- T9 Dialing (Paranoid Android)
- Clear all apps button in recent apps list (D4rKn3sSyS)
- Volume Fix (Peter Alfonso)
- HSPA+ display support (CM)
- Play app auto restore
- Emergency Broadcast Settings Menu
- Lean and fast
----------------
Download Menu:
French Vanilla ROM (with the MODs): http://goo.im/devs/mmuzzy/maguro/maguro_signed_071313_104219.zip - 7/13/13
Vanilla ROM (no MODs): http://d-h.st/h0Q - 7/13/13
GAPPs: http://goo.im/gapps/
Goo.im
----------------
Directions (Clean Flash)
1. Wipe factory data/reset
2. Wipe cache
3. Go into mounts and storage
4. Format /system
5. Format /data
6. Format /cache
7. Wipe dalvik
8. Flash ROM
9. Flash GAPPs
Directions (Dirty Flash)
1. Wipe cache
2. Wipe dalvik
3. Flash ROM
4. Flash GAPPs
Tips:
- Quick Toggles - Hold down settings tile for setup screen. Activate tiles in order you want them to appear!
- Clean flash strongly recommended with Android 4.2!
- Turn off Currents background sync! Major lag cause in 4.2.
- If you get a status 7 error flashing a ROM, try making sure SYSTEM is unmounted in 'mount/unmount partitions' menu in recovery.
..Thanks to jroid for finding the tip.
----------------
Changelog:
July 13, 2013
- Security patched Vanilla ROM uploaded
July 13, 2013
- Patch for Bug: 8219321
- Patch for Bug: 9695860
Note: This is a security update to patch the master key and unsigned zip issues in AOSP.
April 20, 2013
- Merged with android-4.2.2_r1.2 (JDQ39E)
- Updated Superuser
March 24, 2013
- Improved HPSA+ Indicator Images
- Reduced Incoming Call Black Background
- Updated T9 Dialer
March 15, 2013
- Updated Quick Settings Tile MOD (http://forum.xda-developers.com/showthread.php?t=1999125)
- Fixed Korean language dialpad
- init.d support
March 6, 2013
- GPS issue fixed (FV)
March 1, 2013
- Merged new JDQ39 posted binaries
- Merged AOSP JDQ39 device files
- T9 dialer restored to ROM
- removed AOSP calendar
- Koush Superuser added
February 17, 2013
- Merged 4.2.2 JDQ39
- Fixed Quick Settings MOD to work with 4.2.2
- Added in necessary binaries for 4.2.2 kernel (thanks Tiny)
- Compiled stock 4.2.2 kernel from AOSP source
Note: 4.2.2 kernels should work fine with this release as it's currently running with one I compiled.
February 2, 2013
- Merged/Update to JOP40G AOSP source
----------------
Addons/Fixes
1% Battery / Center Clock (3/24) (reysonance) - Post
Stock 4.2.2/JDQ39 Kernel - Download
----------------
Thanks Cyanogenmod, AOKP, TeamEOS, Team Horizon, Rascarlo, Paranoid Android, Craig Gomez, Tiny4579, Kmagameguy, adbFreedom, mcp770, runandhide05, Flomaster, Blame2, mcavoya, SparkyXI for the banner.
----------------
ROM/kernel source found here: https://android.googlesource.com/device/samsung/toro
Kevdliu's Android 4.2 Quick Settings Mod: http://forum.xda-developers.com/showthread.php?t=1999125
----------------
​
reserve
reserve
I'll Dl right now and give it a go for yea
Sent from my Galaxy Nexus using xda app-developers app
confyzone said:
I'll Dl right now and give it a go for yea
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
I appreciate that. Thank you.
No problem gonna back up and flash now should be back in 30min or so with a reply
Edit:
So after going in I've found the rom is smooth no real crashes even tested a Franco kernel
I'm sure as you update you'll probably add more customization but one thing I'll point out is that your quick settings control should be integrated with the settings not as a side app because that confused me trying to find it
Sent from my Galaxy Nexus using xda app-developers app
confyzone said:
No problem gonna back up and flash now should be back in 30min or so with a reply
Edit:
So after going in I've found the rom is smooth no real crashes even tested a Franco kernel
I'm sure as you update you'll probably add more customization but one thing I'll point out is that your quick settings control should be integrated with the settings not as a side app because that confused me trying to find it
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Ah, I didn't realize you updated in your post. Thank you. If you hold down the settings icon within the quick settings it will bring you to the setup for the tiles. Thank you for your help.
Been looking forward to work on Maguro for awhile now and always working like advertised.
Sent from my Galaxy Nexus using Tapatalk 2
unforgivenmercy said:
Been looking forward to work on Maguro for awhile now and always working like advertised.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Hopefully we don't have many device specific gotchas. Thank you.
Awesome! Do you know how long I have waited for this ?
Just pure speed, and cleanness
I missed just a clean vanilla aosp rom for the maguro , well this is it then!
Cant wait to flash! Too bad I have slow internet at home
Sent from my Nexus Prime
thegtfusion said:
Awesome! Do you know how long I have waited for this ?
Just pure speed, and cleanness
Sent from my Nexus Prime
Click to expand...
Click to collapse
Thanks. I just needed to get my stuff together but the ROM seems to be doing fine so far. *fingers crossed*
mmuzzy said:
Thanks. I just needed to get my stuff together but it seems to be doing fine so far. *knock on wood*
Click to expand...
Click to collapse
I edited my post
Sent from my Nexus Prime
---------- Post added at 10:38 PM ---------- Previous post was at 10:25 PM ----------
Will we also get the different flavours? French flavour and chocolatemilk flavour?
Sent from my Nexus Prime
thegtfusion said:
I edited my post
Sent from my Nexus Prime
---------- Post added at 10:38 PM ---------- Previous post was at 10:25 PM ----------
Will we also get the different flavours? French flavour and chocolatemilk flavour?
Sent from my Nexus Prime
Click to expand...
Click to collapse
Vanilla - stock 4.1.2 AOSP, which Maguro has anyway unlike Verizon where my phone lives
French Vanilla - this is it, the ROM I posted here... it has Kevdiu's Quick Toggles MOD, Enhanced Power Menu, Expanded Desktop, Recent Apps menu clear all, etc
Chocolate Milk = CM = CyanogenMOD - something I was toying around with to replace the Modded ROM because there were so many requests for features I thought a CM based ROM might make more sense. I don't think I'm going to continue it but if I do another version has to go.
I think I like the lighter modded ROM. I can't do 3 different versions of a ROM x 6 devices. As it is it feels like all I do is mess with Android.
mmuzzy said:
Vanilla - stock AOSP, which this phone has anyway unlike Verizon where my phone lives
French Vanilla - this is it, the ROM I posted here... it has Kevdiu's Quick Toggles MOD, Enhanced Power Menu, Expanded Desktop, Recent Apps menu clear all, etc
Chocolate Milk = CM = CyanogenMOD - something I was toying around with to replace the Modded ROM because there were so many requests for features I thought a CM based ROM might make more sense. I don't think I'm going to continue it but if I do another version has to go.
I think I like the lighter modded ROM. I can't do 3 different versions of a ROM x 6 devices. As it is it feels like all I do is mess with Android.
Click to expand...
Click to collapse
Ahaa I understand. The french vanilla is good enough then .
Flashing asap!
Sent from my Nexus Prime
just flashed, im going to test and report asap... thank you
edit :well, rom is super fast, using trinity kernel, its just awsome , im going to use it for a long time, thanks for the rom.
I was looking for a ROM exactly like this one - mostly stock with the Quick Settings mod. I've flashed it and it's running beautifully; no problems so far (granted, it's only been about 30 minutes). I'm planning to try flashing some other kernels with it just for fun.
EDIT: tried Franco kernel and lean kernel. Both smooth, but I can't really see a difference from the stock kernel. (Lean is overclocked so obviously faster.)
hey muzzy ! nice to see your rom developing here ! i saw your rom over at toro , was rather hoping you started here ! Dling now and hope to see more development in this if you dont mind , i can be your tester for maguro .
This is perfect! My maguro is right now in service but after it comes back I'll flash it!
Actually I wanted to make just the same ROM - everything stock but with few additions and you made it just as I wanted.
If you'd like to have some help with developing this ROM - PM me, I'd love to help!
This rom seems awesome! Omg this is exactly what my maguro wants Will flash when I come home! Holy **** this will be good
Sent from my super fast Prime filled with beans.
Madflapjack said:
just flashed, im going to test and report asap... thank you
edit :well, rom is super fast, using trinity kernel, its just awsome , im going to use it for a long time, thanks for the rom.
Click to expand...
Click to collapse
Great! Glad you like it.
bananagranola said:
I was looking for a ROM exactly like this one - mostly stock with the Quick Settings mod. I've flashed it and it's running beautifully; no problems so far (granted, it's only been about 30 minutes). I'm planning to try flashing some other kernels with it just for fun.
EDIT: tried Franco kernel and lean kernel. Both smooth, but I can't really see a difference from the stock kernel. (Lean is overclocked so obviously faster.)
Click to expand...
Click to collapse
On my phone I haven't bothered flashing kernels in a while. I think that's mainly because I spend so much time compiling ROMs I don't actually get to use them.
-Jesco- said:
hey muzzy ! nice to see your rom developing here ! i saw your rom over at toro , was rather hoping you started here ! Dling now and hope to see more development in this if you dont mind , i can be your tester for maguro .
Click to expand...
Click to collapse
I appreciate that. Thank you.
cadavreatpinopl said:
This is perfect! My maguro is right now in service but after it comes back I'll flash it!
Actually I wanted to make just the same ROM - everything stock but with few additions and you made it just as I wanted.
If you'd like to have some help with developing this ROM - PM me, I'd love to help!
Click to expand...
Click to collapse
Thank you.
tjackbjorn said:
This rom seems awesome! Omg this is exactly what my maguro wants Will flash when I come home! Holy **** this will be good
Sent from my super fast Prime filled with beans.
Click to expand...
Click to collapse
I hope you like it!
This rom were just as good as I thought! Good speed and pretty smooth
I noticed one thing, the gps seems weird? Google Now says I have to activate gps, but it is on. And sometimes it random starts to search for my location?
Sent from my super fast Prime filled with beans.

[ROM] AOSP 4.3.1 Stable [DanKang] Slim + optimizations (11/04/13)

4.3.1 Stable [DanKang] Slim + optimizations (11/04/13)
I am not responsible for any bricks or issues you might encounter, This ROM is tested and stable and should only be flashed on T999 devices​
As many of you may know Slimbean is one of the most popular ROMs out there and the team has released the last stable until Android 4.4, on top of that our device maintainer is MIA and busy with real life.
I noticed 2 issues in stable 2 that prompted me to take this masterpiece the slim team as created for us and fix them, I take no credit for this the bugged back animation (this made me dizzy) and returning to stock DPI causing the Google services framework to frequently disconnect that made it into stable build 2 are resolved in this ROM, I also ship the ROM with a stock minimal GAPPS package that will allow the apps to be properly updated in the market Everything else is butter I take no credit for this! all the credit goes to the slim team
For a full list of features, see this chart
-Stock S3 DPI
-Changed default notification sound and ringtone
-CM alarms, notifications and ringtones
-Organized settings (Much cleaner now IMO)
-APK's that aren't required have been removed
-Lockscreen unlock and lock handles are once again default AOSP
-Default AOSP walpaper on boot
-Stock Nexus boot animation
-Official Google Keyboard
-AOSP email included
-Inverted MMS by default - Look at the app settings before posting questions Mark read, etc is all there
-Added clock widget from CM 10.2 (System/app)
-Fixed glitched back animation
-Full GPU rendering (the way it should be)
-No ROM branding, you will not see the words Dan and Kang anywhere on the ROM
-Latest KT Kernel
-Mpdecision disabled (This is recommended for KT kernel)
Install Instructions
-Full wipe (Caches, system, etc.)
-Install ROM
-Flash GAPPS provided
-Reboot
-Enable root in developer settings
Q) Root doesn't work! (4.3 only)
A) From a clean build you need to enable root access for Superuser itself. This is different from 4.2.2 in which Superuser by default had root access on a new install. To do this, go toSettings -> Developer options -> Root access. If an app attempts to request root access before Superuser itself has access, it may cause problems with that app in the future where root requests are silently denied.
Instructions to enable root on Android 4.3
Open Settings>about
Tap on the build info 7 times to enable dev settings
open developer settings and enable root (select Apps + adb)
enjoy
Changelog
Code:
11-04-2013
-Removed music.apk (wasted space)
-Ship with latest KT kernel (will fix wakelocks and greatly improve battery life)
-mpdecision removed (unneeded, use ktoonservative governor in KTweaker)
(if your not using Ktoonservative, remember to check auto hotplug on all NON hotplugging governors)
-Final build
10-30-2013
-Removed Dark UI, if you need this don't update
-Fixed MMS security limit
-Stock CM kernel
-Should be rock solid now ;)
10/28/2013
-Initial release
Credits:
Slim team - Donate to these guys, seriously....
CM team
AOKP
XDA Developers
More that I might be forgetting
Downloads:
DanKang 4.3.1 11/04/2013 STABLE
md5: 348d9941d3ade514c3544e94274e9919
GAPPS - use this one
-Slimmed down version of the stock GAPPS, This will allow apps to update properly from the Market
Kernel Source:Here
Donate to ktoonsez here: http://forum.xda-developers.com/donatetome.php?u=4325945
If you like this ROM, Donate to the SLIM team here: http://www.slimroms.net/index.php/donations
I take no credit for this
Good post, I remember testing this. It was the most stable AOSP ROM apart from AOSP itself!
The Return of the King... Err KANG!
Sent from my SGH-T999 using Tapatalk
Looks awesome! Will be giving a go. Good ol' AOSP
If this AOSP rom is good enough for Dan, than its good enough for me.
Sent from my SGH-T999 using XDA Premium 4 mobile app
I'm a little aroused right now... Gonna have to try this over the weekend!!
DC2CA said:
I'm a little aroused right now... Gonna have to try this over the weekend!!
Click to expand...
Click to collapse
LMFAO!
Yeah, I'm gonna take a break from 4.3 TW and come here and lay my feet up. This ROM is a dream, no questions asked.
I'm getting gapps force closes with the new gapps from the link
Sent from my SAMSUNG-SGH-T999 using Tapatalk
DNA420 said:
I'm getting gapps force closes with the new gapps from the link
Sent from my SAMSUNG-SGH-T999 using Tapatalk
Click to expand...
Click to collapse
full wipe, I've had many testers and its not a problem on my end
Seems to only happen after reboots, i will try wiping
Sent from my SAMSUNG-SGH-T999 using Tapatalk
Rom doesn't play well with kernel changes...
Edit: was just using the wrong tweak app
Sent from my Nexus 7 using Tapatalk 4
Kevin Goot said:
Rom doesn't play well with kernel changes...
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
what are you trying to do? I have no issues
This post isn't much help bud
Danvdh said:
what are you trying to do? I have no issues
This post isn't much help bud
Click to expand...
Click to collapse
Then don't reply bud... I got it anyway though
Sent from my Nexus 7 using Tapatalk 4
Is it safe to assume this has all the toggles? What about tethering?
I'll be flashing Thursday night I think.. Can I get a Halloween theme?
Kevin Goot said:
Then don't reply bud... I got it anyway though
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Glad you got it man, sorry I came across a little... rude
stupid typing lol
DC2CA said:
Is it safe to assume this has all the toggles? What about tethering?
I'll be flashing Thursday night I think.. Can I get a Halloween theme?
Click to expand...
Click to collapse
you will not be a short for features, tethering, bluetooth, usbaudio all work
I'm going to have to give this a run I'm on stable 2 right now and its been nice
Sent from my SGH-T999 using xda app-developers app
APN Settings?
After flashing I have no network connection. Checked APN and there are no entries, tried resetting to default. Also was unable to find a mobile network to connect to. I came from Dirty Unicorns ROM, performed a full wipe before installation. Also when I go to network selection I get the error, "Error while searching for networks."
Any ideas? Wiping and installing again just to be sure right now.
cleonjones said:
After flashing I have no network connection. Checked APN and there are no entries, tried resetting to default. Also was unable to find a mobile network to connect to. I came from Dirty Unicorns ROM, performed a full wipe before installation. Also when I go to network selection I get the error, "Error while searching for networks."
Any ideas? Wiping and installing again just to be sure right now.
Click to expand...
Click to collapse
Did you check for your IMEI? It happens, when TW to Custom 4.2 to Custom 4.2.2 to Custom 4.3 to Custom 4.3.1
Happened to me, from Slim 4.2.2 and tried a 4.3
Sent from my SGP311 using Tapatalk 4
I've just installed this and love it already, but I have a question. Is it possible to use the stock launcher instead of NOVA?
ndwgs said:
Did you check for your IMEI? It happens, when TW to Custom 4.2 to Custom 4.2.2 to Custom 4.3 to Custom 4.3.1
Happened to me, from Slim 4.2.2 and tried a 4.3
Sent from my SGP311 using Tapatalk 4
Click to expand...
Click to collapse
I have an IMEI on my current ROM which I restored, I will flash this ROM again and check if my IMEI is gone. Is it possible to pull the IMEI from the ROM where it's still in-tact and restore it to this ROM?

Unofficial Slim Rom Alpha build Lollipop 5.0.2 for D2ATT 02/07/2015

Quote:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
HI, I am not a developer but I am able to build and post. Please note, I do not have the capability to fix anything broken,support the rom, fix issues, or add any new options/features due to myself being a newbie. I kindly request fellow members help each other out. I will build and post when I can.
I will allow questions, comments, and off topic stuff on this thread. Please be respectful to your fellow members/posters.
Credits:
Slim roms, Cyanogenmod, and any one else that I fail to mention.
Thanks to Maxtrixzone, Pandasa123, and samoled for answering my questions on how to build and compile CM12.
Instructions on how to install: http://www.slimroms.net/index.php/installation
If you are doing an initial install, a full wipe may be required.
Gapps: http://www.slimroms.net/index.php/downloads/dlsearch/viewcategory/1251-addons/downloads download and install the Beta 5.0 version.
Root: http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Slim Gerrit: https://gerrit.slimroms.net/#/q /statuspen,n,z
Stuff that works:
Stuff that dont work:
Stock camera app. Use a camera from playstore.
no video
Users are reporting that the phone is not reading the SD card.
You tell me.
Download link is in the 2nd post.
XDA:DevDB Information
Unofficial Slim Rom Alpha build Lollipop 5.0.2 for D2ATT, ROM for the AT&T Samsung Galaxy S III
Contributors
LARMYV, Cyanogenmod Team, Slim Rom Team
Source Code: http://www.slimroms.net/
ROM OS Version: Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: latest bootloader
Based On: Slim Roms
Version Information
Status: Alpha
Created 2014-12-20
Last Updated 2015-02-07
download link: https://www.androidfilehost.com/?fid=95916177934525010
02/07/2015
Changelog
Some general updates
Added disable search bar in Recent Menu under settings
Layers is also under themes in setting (in the interface tab) if you installed layers.
Removed Audio FX and replaced it with V4A (viper for android).
V4A is also in the interface tab in settings.
******* To use V4A do the following: ********
Go to playstore and download SElinuxModeChanger. Open it and select Permissive.
go to settings developer options, go down to Media, and turn off Use NuPlayer (experimental)
go into V4A, install drivers, go to options, select FX Compatable Mode, then Select Compatible and reboot phone
Download Link: https://www.androidfilehost.com/?fid=95916177934522020
02/02/2015
Changelog:
Some genteral updates
some updates to kernel
some fixes to audio
some fixes to mms
added proximity speaker
added ambient display
new slim splash screen (it says slim kat, but I like it)
added notification lights
and the biggie.... Added RRO "LAYERS". Please see next post on Layers.
Download link: https://www.androidfilehost.com/?fid=95916177934516402
01/23/2015
Changelog:
some fixes to frameworks
some updates to telecomm
some updates to telephony
some updates to settings. Carrier settings was removed.
some updates to incallui and dialer
some updates to slim launcher
added CM file manager Thanks @desalesouche
aded omni switch
added CM12 music app
01/10/2015 https://www.androidfilehost.com/?fid=95887005526790208
Changelog:
updates and fixes to audio, bluetooth and kenel..
New Icon to stock gallery and browser
01/08/2015 https://www.androidfilehost.com/?fid=95887005526788877
Changelog:
Some fixes to audio
Audio FX new launcher Icon
Some fixes to contacts and MMS
Some fixes to kernel
some fixes to bluetooth
Fixes to frameworks, including adding slim sleek bar preference
12/28/2014 https://www.androidfilehost.com/?fid=95864024717071266
changelog:
kernel is now fixed. No longer need to flash another kernel right after it.
The rom and kernel is now compiled with Linaro Toolchain 4.9!
12/24/2014 https://www.androidfilehost.com/?fid=95864024717069163
if you are flashing the above rom, you must flash a kernel right after it. I am using neocore kernel for the time being. http://forum.xda-developers.com/galaxy-s3-t-mobile/development/kernel-neocore-hybrid-kernel-t2959557
Changelog;
no system/apn is fixed,
updates to incall, slimlauncher, telephony, browser.
12/20/2014 https://www.androidfilehost.com/?fid=95864024717066824
change log.
upgraded rom to 5.02
added wallpaper
added some sounds
12/19/2014 https://www.androidfilehost.com/?fid=95864024717066635
Change log.
Initial Build.
Sooo.... what is RRO Layers? RRO Layers or Layers for short is a theme engine that is similar to CM12 Theme but better. Cm12 theme enging is limited to just the system. On layers, everything can be themed including dialer, youtube, gmail etc. It is all a work in progress. Also layers is more secure (or so I read). More info, along with how to set it up can be found in the link below;
http://forum.xda-developers.com/android/apps-games/official-layers-bitsyko-apps-rro-t3012172
Below is links to some layers
https://www.androidfilehost.com/?w=files&flid=25169
https://www.androidfilehost.com/?fid=95916177934521349
https://plus.google.com/communities...9/stream/d31773fe-c129-4ede-bab0-869bc7870274
Instructions: go to the above website and follow instructions to down the app. Once installed, download one of the theme zips. Extract the theme zip and move those files to the other directory. Go into the layers app, then go to the other overlays folder. long press the desired apks (make sure they are highlighted), then press the 2 cards button. It iwill ask you to reboot, click on it, and when it reboots, your theme will be active..
If you find any more themes, please post the link.
Good luck and Happy Theming!
reserved...
Yes! Been patiently waiting for a slim build
So what doesn't work?
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
gvsukids said:
So what doesn't work?
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
so far, i noticed the stock camera does not work. I am also uploading a new build shortly. The rom is upgrading to 5.02
gvsukids said:
So what doesn't work?
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
No service for me. Will try next one.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
tallsilver said:
No service for me. Will try next one.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah, I just noticed that. It was working, and now its not. I noticed some new open commits on apn and lte. I'll try to add them later tonight. New build is up.
LARMYV said:
Yeah, I just noticed that. It was working, and now its not. I noticed some new open commits on apn and lte. I'll try to add them later tonight. New build is up.
Click to expand...
Click to collapse
Service on new build?
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
I installed new build and reset APN and reboot. So far service is back and working.
Got service back on 5.0.2. Survived reboot but had to set back to LTE afterwards.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
so what works and what doesn't in this 5.0.2
Can it be installed on d2tmo T-999?
jondroid2 said:
Got service back on 5.0.2. Survived reboot but had to set back to LTE afterwards.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
Spoke too soon. After 2nd reboot lost service.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Congrats man!!
More option the merrier!!
No Service and no APN settings how can I fix this please
You can try going into APN settings and select reset to default and reboot. That seems to work for me so far. Later tonight I'll work on a fix.
matrixzone said:
Congrats man!!
More option the merrier!!
Click to expand...
Click to collapse
Thanks man. This Dev stuff is hard work I see. I may need your help on this APN/service issue, if I don't fix it myself
LARMYV said:
Thanks man. This Dev stuff is hard work I see. I may need your help on this APN/service issue, if I don't fix it myself
Click to expand...
Click to collapse
Sure

Categories

Resources