Related
Hello guys !!! This thread is a support thread for the porting of CM9 (compiled from source) to the Optimus Me P350 (codename:pecan).
Member of Android ModTeam
tonystark88 (me)
STATUS OF PROJECT
Finally, after i've revritten device files and added some libraries, this rom boot. In the bottom you can see the list of releases and patches you must apply to launche a old/new release.
WORK
First Boot
Screen
Touch (fully works now)
Bluetooth
HW Acceleration
NEED TO BE VERIFIED OR WORKS PARTIALLY
GPS
WIFI
NOT WORK
Audio
DOWNLOAD AND LINKS
-------------------------------------------------------------------------------------------------------------------------------------------------------
alpha 1 : http://www.mediafire.com/?j5qf5vkhdk1nezr
-------------------------------------------------------------------------------------------------------------------------------------------------------
Screen Patch: http://www.mediafire.com/?eh3ce0xz0y7zuqb
Official pages
Android ModTeam Official Page: http://cyanoportingteam.blogspot.it/
Official G+ Page:https://plus.google.com/u/0/111637310703918579141
INSTALLATION
Go in CWM Recovery
Select install zip from SD Card
Select the zip
Do a wipe data/factory reset
Flash also Screen Patch
Reboot and enjoy this first CM9!
GITHUB SOURCE
soon
SPECIAL THANKS
Special thanks to:
cips gokhle for the Kernel Sources
pax0r: for the start of development for this device
thanks
thanks
what is alpha 0?
thanks
your website still show only u1850 when you will add p350 ?
---------- Post added at 06:38 PM ---------- Previous post was at 06:38 PM ----------
meethere said:
what is alpha 0?
thanks
Click to expand...
Click to collapse
like pre-alpha
yes a pre-alpha, i like call a first boot ROM in this way
tonystark88 i think for touch work you need touch_mcs600.idc i'm using it on my aosp ics alpha 2 try it on next update i uploaded touch_mcs600.idc from aosp ics take a look
http://www.mediafire.com/?v259252ia5iw84e
cips gokhle said:
tonystark88 i think for touch work you need touch_mcs600.idc i'm using it on my aosp ics alpha 2 try it on next update i uploaded touch_mcs600.idc from aosp ics take a look
http://www.mediafire.com/?v259252ia5iw84e
Click to expand...
Click to collapse
yup i think it need because p500 use too
and tonystark88 thanks for taking p350 cm9 project good job
This rom boots, and the touch uses the blue ring, but, it responds better than the AOSP ICS .B
And is a little bit faster.
AitorF1 said:
This rom boots, and the touch uses the blue ring, but, it responds better than the AOSP ICS .B
And is a little bit faster.
Click to expand...
Click to collapse
because it's cm my is pure that you see in galaxy nexus but cm is better then aosp because in cm you can do more THEN pure aosp
cips gokhle said:
because it's cm my is pure that you see in galaxy nexus but cm is better then aosp because in cm you can do more the pure aosp
Click to expand...
Click to collapse
Yes, but the screen flashes, in AOSP not happens.
aitorf1 said:
yes, but the screen flashes, in aosp not happens.
Click to expand...
Click to collapse
what you mean? I can't get you?
thanks all dev to make cm9 work on our device
cips gokhle said:
what you mean? I can't get you?
Click to expand...
Click to collapse
In this rom the screen flashes sometimes, it's a bug i think.
aitorf1 said:
in this rom the screen flashes sometimes, it's a bug i think.
Click to expand...
Click to collapse
ohhh then it's bug
ok all these are good info on this device. About the touch , paxor uses another lib but it's not a problem, i include this in the next release. With time all will be fixed, and i need time because i compile my CM with my laptop (not too fast, only 4GB of RAM).
tonystark88 said:
ok all these are good info on this device. About the touch , paxor uses another lib but it's not a problem, i include this in the next release. With time all will be fixed, and i need time because i compile my CM with my laptop (not too fast, only 4GB of RAM).
Click to expand...
Click to collapse
4gb man its good enough
Sent from my LG-P350 using Tapatalk
nirav07 said:
4gb man its good enough
Sent from my LG-P350 using Tapatalk
Click to expand...
Click to collapse
no ics need more then 4 gb ram i have 8 gb ram and i can compile ics in 20 min
New support site created. All news and daily updates are available on this site:
http://icsforpecan.altervista.org
New release soon, all info on the official site when upload is finished
Ok so i really want to compile a working 3.x.x kernel for this phone....
this is what i have found so far.....
Stock kernels for linux.
http://www.kernel.org/
3.4 android goldfish git
https://android.googlesource.com/kernel/goldfish/+/android-goldfish-3.4
Common HTC modules
https://android.googlesource.com/device/htc/common
Last official HTC kernel
http://dl4.htc.com/RomCode/Source_and_Binaries/glacier-gb-crc-2.6.35-4dcb781.tar.gz
i can't seem to find any cross-compile tool chains for armelv7l any one have any leads plox?
Thx to ...Awesome...
armelv7l cross-compile tool chain
http://forum.xda-developers.com/show....php?t=1686310
Try this one worked for me last night building my ICS kernel havent tried for a 3.0 kernel yet.
toolchain-4.6.3.tar.bz2
Here is the thread!
http://forum.xda-developers.com/showthread.php?t=1686310
...Awesome... said:
Try this one worked for me last night building my ICS kernel havent tried for a 3.0 kernel yet.
toolchain-4.6.3.tar.bz2
Here is the thread!
http://forum.xda-developers.com/showthread.php?t=1686310
Click to expand...
Click to collapse
Thanx man! just what i was looking for!
ICS works so much better on a 3.x kernel, ive worked on the galaxy nexus and glaxy 2 love that kernel... also the WIFI handling for the BCM4329 is wayyyyyy better.
Batt is beter, i hacked a 3.02 kernel together using a Ubuntu chroot a while back but its not a true boot kernel would just emulate features it was oh so promising....
Im going to work on this tonight thx!
hellmonger said:
Thanx man! just what i was looking for!
ICS works so much better on a 3.x kernel, ive worked on the galaxy nexus and glaxy 2 love that kernel... also the WIFI handling for the BCM4329 is wayyyyyy better.
Batt is beter, i hacked a 3.02 kernel together using a Ubuntu chroot a while back but its not a true boot kernel would just emulate features it was oh so promising....
Im going to work on this tonight thx!
Click to expand...
Click to collapse
Good luck man let me know if u need any help. The whole community would really benefit if you successfully compile it.
Sent from my Dark Unicorn Resurrected v.2 using Tapatalk 2
...Awesome... said:
Good luck man let me know if u need any help. The whole community would really benefit if you successfully compile it.
Sent from my Dark Unicorn Resurrected v.2 using Tapatalk 2
Click to expand...
Click to collapse
+1 as I've said countless times, I'm no kernel dev but who knows... I may know a thing or two that could be helpful good luck
Sent from my MyTouch 4G using XDA
thanks
hellmonger said:
Thanx man! just what i was looking for!
ICS works so much better on a 3.x kernel, ive worked on the galaxy nexus and glaxy 2 love that kernel... also the WIFI handling for the BCM4329 is wayyyyyy better.
Batt is beter, i hacked a 3.02 kernel together using a Ubuntu chroot a while back but its not a true boot kernel would just emulate features it was oh so promising....
Im going to work on this tonight thx!
Click to expand...
Click to collapse
Thanks for the enthusiasm to work on this project. The community is here to help. Let us know if we can be of any help.
Anyone has the device tree for ICS?
Sent from my HTC Glacier using XDA
THEindian said:
Anyone has the device tree for ICS?
Sent from my HTC Glacier using XDA
Click to expand...
Click to collapse
Prolly febycv has a broken one... cam and wifi
There is no device tree for ICS for glacier thats the main problem....
Im compiling an attempt right now...... fml it takes for ever on a 2xcore 2.18
1st attempt
the name is wrong, i changed the identifier to make it more compatible but this is a 3.x kernel
it does boot but seems like nothing works to well.....
don't try unless you really want to....
im still working on it.
just to try
adb shell
reboot bootloader
fastboot boot boot.img
I am not the kernel type of guy, but from what I can tell this is massive progress. Hope you succeed, and if you have any questions I'm here. I probably won't be able to answer them though . Also, this kernel you posted above my post works on Sense 4?
invasion2 said:
I am not the kernel type of guy, but from what I can tell this is massive progress. Hope you succeed, and if you have any questions I'm here. I probably won't be able to answer them though . Also, this kernel you posted above my post works on Sense 4?
Click to expand...
Click to collapse
Become a test brother
put the boot.img in you platform-tools folder
reboot into bootloader
fastboot boot boot.img
let me know
hellmonger said:
Become a test brother
put the boot.img in you platform-tools folder
reboot into bootloader
fastboot boot boot.img
let me know
Click to expand...
Click to collapse
Sure. I'm at a friends house right now, so give me until mid-tomorrow to flash it and test!
Sent from my Sense 4.0 Glacier using XDA Premium
hellmonger said:
Become a test brother
put the boot.img in you platform-tools folder
reboot into bootloader
fastboot boot boot.img
let me know
Click to expand...
Click to collapse
So it is sense 4? NICE! Gonna have to tell me how ots done, mine compiled haleay and then stopped. Mdj's source
THEindian said:
So it is sense 4? NICE! Gonna have to tell me how ots done, mine compiled haleay and then stopped. Mdj's source
Click to expand...
Click to collapse
Its a kernel not a rom man should work on sense4 when finished but not quite there yet lol at least it boots
Sent from my MyTouch 4g using XDA
hellmonger said:
Its a kernel not a rom man should work on sense4 when finished but not quite there yet lol at least it boots
Sent from my MyTouch 4g using XDA
Click to expand...
Click to collapse
Ok, so it is a sense 4 kernel? Dudeeee, whos source/how did you fix it so it would compile? I tried changing some drivers so it worked on the glacier but it wouldnt compile
Upgraded 2.6.39 with 3.0 Linux gnu cross compile source but this is far from done....
Sent from my MyTouch 4g using XDA
This is so awesome!!
so is this the answer to our long awaited camera problem on sense cream sandwiches
jrlatta said:
so is this the answer to our long awaited camera problem on sense cream sandwiches
Click to expand...
Click to collapse
It may be if it's able to be compiled into a usable state. Sit back, be patient and have hope.
Sent from my HTC Glacier using XDA
Hey bro tested for a few hours now..I don't understand what you mean by nothing works! WiFi, phone calls, data, everything works. I don't notice a difference..maybe I did it wrong? Lol.
This is My new thread for my CM 9 builds built from source with the help of the cmhtcleo team (milaq) and ngiordano.
D.O.G. (D)a(O)tha(G)uy is a modified CyanogenMod 9 compiled from source with a few extra features built in.
*Tytung's ICS 3.6 kernel(credits to Tytung the great)
*Swipable keyboard from Tytungs CM9( Thank you and credits to Tytung the great)
*Soft keys enabled as default.
*Mifile manager so you can access your apps on your sd card.
*SuperSu added instead of the regular Superuser
system partition is 250mb/7mb cache
Everything should work now
ICS Gapps are included.
V1a
clk is the main build working on magldr.
link :
http://d-h.st/ZRd
more style coming soon
How is this any different from the CM9 nightlies?
Zorua said:
How is this any different from the CM9 nightlies?
Click to expand...
Click to collapse
Video recording works. And it was compiled on my computer using debian.
Is NativeSD version in pipeline?
Sent from my HD2 using Tapatalk 2
sbhas2k said:
Is NativeSD version in pipeline?
Sent from my HD2 using Tapatalk 2
Click to expand...
Click to collapse
I'm working on that.
Good to see you back developing bro. I'll test it as soon as you get a MGLDR version
Sent from my SGH-T959 using Tapatalk 2
mexicandroid said:
Good to see you back developing bro. I'll test it as soon as you get a MGLDR version
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
all you have to do is flash the magldr zip from cm 9 nightlies i think it should work.
how about making a theme for me please. we could be team daothaguy
10/17/2012 daothaguy updated.
Everyone Im taking a one to two day break on the daothaguy regulars because im downloading cm10 sources to try and build a hd2 jelly build wish me luck. if i see that i will be getting no where than on the second day ill compile a fresh cm9 build thanks for your support and patience.
My sources on my computer is messed up until I can get the surfaceflinger problem fixed compiling is on hold.
i figured out the problem why the build was not compiling for the surfaceflinger.o i deleted the line in the surface.cpp concerning the EVENT_FORCE_COMPOSITION. it was being checked forced and it wouldnt allow for it so i deleted it and it worked. so i will be uploading the new build today. Thanks for all your support. 500 downloads for my last build so there is alot who love this build especially since no one posted complaints im content
updated to build 10/22/2012
Im still here I didnt forget about all the HTC HD2 users. Im working on some new things. Just finished compiling Gingerbread CyanogenMod right now downloading jellybean source from AOSP well see how that turns out.
SuperjellyNow for the HTC Desire ported to the HTC HD2 looking for some testers you wont be disappointed.
[email protected] said:
SuperjellyNow for the HTC Desire ported to the HTC HD2 looking for some testers you wont be disappointed.
Click to expand...
Click to collapse
ill give it a whirl
Kameirus said:
ill give it a whirl
Click to expand...
Click to collapse
i pm you the link.
[email protected] said:
i pm you the link.
Click to expand...
Click to collapse
got it
gonna flash when i get back from the store
and then will let ya know how it goes
Ok I have a MIUI JB ROM but i didnt upload it yet. still testing it out but it runs fast.
[email protected] said:
i pm you the link.
Click to expand...
Click to collapse
Thx for the work, I'd like to test it too.
micavimale said:
Thx for the work, I'd like to test it too.
Click to expand...
Click to collapse
i pm you the link also
When we'll have cyanogenmod 10.1 (Android 4.2) on us devices?
Thanks
3 days after the yesterday of the day before it
Sent from my Jellybean Xperia S
Ben36 said:
3 days after the yesterday of the day before it
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
So tomorrow? xD
Ben36 said:
3 days after the yesterday of the day before it
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
Creative, I like it. I was thinking something along the lines of before Cyanogenmod 11 and after Cyanogenmod 10
4lex96 said:
When we'll have cyanogenmod 10.1 (Android 4.2) on us devices?
Thanks
Click to expand...
Click to collapse
5 days to go...
Sent from my IPhone 6 using Android 5.0
ap030993 said:
5 days to go...
Sent from my IPhone 6 using Android 5.0
Click to expand...
Click to collapse
I think that Kali- has just managed to get the Xperia T booting 4.2 not sure about the S
fareeed said:
I think that Kali- has just managed to get the Xperia T booting 4.2 not sure about the S
Click to expand...
Click to collapse
I have no information on that...but free xperia website says 5 days to go for release and the change log has also been updated with CM 10.1 - Latest CM 10.1
Sent from my IPhone 6 using Android 5.0
ap030993 said:
I have no information on that...but free xperia website says 5 days to go for release and the change log has also been updated with CM 10.1 - Latest CM 10.1
Sent from my IPhone 6 using Android 5.0
Click to expand...
Click to collapse
It says WIP, not necessary release.
Felimenta97 said:
It says WIP, not necessary release.
Click to expand...
Click to collapse
That's true, I'm just basing what I said on seeing Kali- post a picture of it up and running on the T on Google+ and all the mr1-staging patches on gerrit seem to be either specifically for the mint or blue-common. But yeah like you say it's a WIP so no release dates yet
fareeed said:
That's true, I'm just basing what I said on seeing Kali- post a picture of it up and running on the T on Google+ and all the mr1-staging patches on gerrit seem to be either specifically for the mint or blue-common. But yeah like you say it's a WIP so no release dates yet
Click to expand...
Click to collapse
Yea i know it's a WIP and it's just to indicate that it is not fully working ,before they just made a section in the website but this week they have added it to the change log . There's a possibility that they might release a beta version and then update it weekly.
[ROM] Unofficial CyanogenMod 10.2
http://db.tt/7pLKEySr
Latest gapps package for Android 4.3 http://forum.xda-developers.com/showthread.php?t=2387878
Note: I have not been able to test this rom yet so I'm not sure what works of does not work
I will write a much better post after work or on lunch
FIRST
SECOND!
Anyone test this yet?
frankx85 said:
Anyone test this yet?
Click to expand...
Click to collapse
Downloading now
I downloaded it and tested it. Now my sdcard won't mount and the phone won't boot, only into recovery :crying:
susy1990 said:
I downloaded it and tested it. Now my sdcard won't mount and the phone won't boot, only into recovery :crying:
Click to expand...
Click to collapse
Really that's odd like I said I have not tested this rom yet because I'm at work so I have not been able to check out issues
ROM doesn't boot.
I'd get a logcat but I'm out of town.
Sent from my SPH-D710 using Tapatalk 4
Dypraxxx said:
ROM doesn't boot.
I'd get a logcat but I'm out of town.
Sent from my SPH-D710 using Tapatalk 4
Click to expand...
Click to collapse
Can you please post the logcat when you a chance, also try this kernel it may work
http://forum.xda-developers.com/showthread.php?t=2270358
Same issue here, ROM wont boot
I'm sorry the rom doesn't boot rebuilding it now hopefully this one will boot again my apologizes
mtb3000gt said:
I'm sorry the rom doesn't boot rebuilding it now hopefully this one will boot again my apologizes
Click to expand...
Click to collapse
All is well I'm very interested in progress here also
Sent from my SCH-R760 using xda app-developers app
ps3hacker3 said:
All is well I'm very interested in progress here also
Sent from my SCH-R760 using xda app-developers app
Click to expand...
Click to collapse
Im working hard on it i really want to get a bootable build going but im having some trouble
mtb3000gt said:
Im working hard on it i really want to get a bootable build going but im having some trouble
Click to expand...
Click to collapse
Take your time my friend! We all appreciate the work your putting in to get us the 4.3 Release so you gotta do what ya gotta do. I'll be waiting for the release
l3gacy28 said:
Take your time my friend! We all appreciate the work your putting in to get us the 4.3 Release so you gotta do what ya gotta do. I'll be waiting for the release
Click to expand...
Click to collapse
trying another build now i think the last build was missing some proprietary files so keep your fingers crossed this one builds
mtb3000gt said:
trying another build now i think the last build was missing some proprietary files so keep your fingers crossed this one builds
Click to expand...
Click to collapse
*crosses fingers and prays* "Please boot.Please boot.Please boot.Please boot."
did any one try flashing a different kernel with the last build to see if that made any difference
Getting ready to flash the newest build,,,i hope it boots
No boot just a black screen ?????
mtb3000gt said:
Getting ready to flash the newest build,,,i hope it boots
No boot just a black screen ?????
Click to expand...
Click to collapse
DARN! do you know what it's missing? I wish I could contribute in any way but I don't know ANY programming or coding
Sent from my SPH-D710 using Tapatalk 4 Beta
l3gacy28 said:
DARN! do you know what it's missing? I wish I could contribute in any way but I don't know ANY programming or coding
Sent from my SPH-D710 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I'm not sure I thought I had everything this time but same thing it tries to boot but just a black screen