Hello guys !!! This thread is a support thread for the porting of CM9 (compiled from source) to the Optimus Me P350 (codename:pecan).
Member of Android ModTeam
tonystark88 (me)
STATUS OF PROJECT
Finally, after i've revritten device files and added some libraries, this rom boot. In the bottom you can see the list of releases and patches you must apply to launche a old/new release.
WORK
First Boot
Screen
Touch (fully works now)
Bluetooth
HW Acceleration
NEED TO BE VERIFIED OR WORKS PARTIALLY
GPS
WIFI
NOT WORK
Audio
DOWNLOAD AND LINKS
-------------------------------------------------------------------------------------------------------------------------------------------------------
alpha 1 : http://www.mediafire.com/?j5qf5vkhdk1nezr
-------------------------------------------------------------------------------------------------------------------------------------------------------
Screen Patch: http://www.mediafire.com/?eh3ce0xz0y7zuqb
Official pages
Android ModTeam Official Page: http://cyanoportingteam.blogspot.it/
Official G+ Page:https://plus.google.com/u/0/111637310703918579141
INSTALLATION
Go in CWM Recovery
Select install zip from SD Card
Select the zip
Do a wipe data/factory reset
Flash also Screen Patch
Reboot and enjoy this first CM9!
GITHUB SOURCE
soon
SPECIAL THANKS
Special thanks to:
cips gokhle for the Kernel Sources
pax0r: for the start of development for this device
thanks
thanks
what is alpha 0?
thanks
your website still show only u1850 when you will add p350 ?
---------- Post added at 06:38 PM ---------- Previous post was at 06:38 PM ----------
meethere said:
what is alpha 0?
thanks
Click to expand...
Click to collapse
like pre-alpha
yes a pre-alpha, i like call a first boot ROM in this way
tonystark88 i think for touch work you need touch_mcs600.idc i'm using it on my aosp ics alpha 2 try it on next update i uploaded touch_mcs600.idc from aosp ics take a look
http://www.mediafire.com/?v259252ia5iw84e
cips gokhle said:
tonystark88 i think for touch work you need touch_mcs600.idc i'm using it on my aosp ics alpha 2 try it on next update i uploaded touch_mcs600.idc from aosp ics take a look
http://www.mediafire.com/?v259252ia5iw84e
Click to expand...
Click to collapse
yup i think it need because p500 use too
and tonystark88 thanks for taking p350 cm9 project good job
This rom boots, and the touch uses the blue ring, but, it responds better than the AOSP ICS .B
And is a little bit faster.
AitorF1 said:
This rom boots, and the touch uses the blue ring, but, it responds better than the AOSP ICS .B
And is a little bit faster.
Click to expand...
Click to collapse
because it's cm my is pure that you see in galaxy nexus but cm is better then aosp because in cm you can do more THEN pure aosp
cips gokhle said:
because it's cm my is pure that you see in galaxy nexus but cm is better then aosp because in cm you can do more the pure aosp
Click to expand...
Click to collapse
Yes, but the screen flashes, in AOSP not happens.
aitorf1 said:
yes, but the screen flashes, in aosp not happens.
Click to expand...
Click to collapse
what you mean? I can't get you?
thanks all dev to make cm9 work on our device
cips gokhle said:
what you mean? I can't get you?
Click to expand...
Click to collapse
In this rom the screen flashes sometimes, it's a bug i think.
aitorf1 said:
in this rom the screen flashes sometimes, it's a bug i think.
Click to expand...
Click to collapse
ohhh then it's bug
ok all these are good info on this device. About the touch , paxor uses another lib but it's not a problem, i include this in the next release. With time all will be fixed, and i need time because i compile my CM with my laptop (not too fast, only 4GB of RAM).
tonystark88 said:
ok all these are good info on this device. About the touch , paxor uses another lib but it's not a problem, i include this in the next release. With time all will be fixed, and i need time because i compile my CM with my laptop (not too fast, only 4GB of RAM).
Click to expand...
Click to collapse
4gb man its good enough
Sent from my LG-P350 using Tapatalk
nirav07 said:
4gb man its good enough
Sent from my LG-P350 using Tapatalk
Click to expand...
Click to collapse
no ics need more then 4 gb ram i have 8 gb ram and i can compile ics in 20 min
New support site created. All news and daily updates are available on this site:
http://icsforpecan.altervista.org
New release soon, all info on the official site when upload is finished
Related
Please do not post in this thread.
as of today official support for this rom have ended.
CyanogenMod 7.2-RC1 Nightly Thread link
use cm7.2 RC1 ROM.
changelog
as of today official support for this rom have ended.
Thanks for the great ROM Cips It works great and smooth.
I've made a video tutorial and another tutorial on my Blog which beginners might find useful. Find the tutorial here http://www.blogotechblog.com/2012/03/cyanogenmod-nightlies-lg-optimus-me-p350/
Video
Screenshots are attached
Press Thanks if you like it
lalitindoria said:
Reserverd...
Click to expand...
Click to collapse
what you mean Reserverd?
cips gokhle said:
what you mean Reserverd?
Click to expand...
Click to collapse
I have updated my post Cips Hope you like it. Thanks for the ROM
do we have the low volume problem in headset while in conversation here? and what about headset without mic? does the phone built in mic work with headphones without mic? thanks and good work.
What is this rom compared with Arc Xp in terms of speed, performances and battery life? Which is better in global? Thanks in advance
Dacky82 said:
What is this rom compared with Arc Xp in terms of speed, performances and battery life? Which is better in global? Thanks in advance
Click to expand...
Click to collapse
this rom have better battery life then are xp. Performance is bit high. It's pure cm7 rom like pax0r cm7 and arc xp is modified rom.
audio
fdmarco3 said:
do we have the low volume problem in headset while in conversation here? and what about headset without mic? does the phone built in mic work with headphones without mic? thanks and good work.
Click to expand...
Click to collapse
i don't know about this problem in nightly. I'm not use p350. But you can try check this problem is have or not
i'm updating nightly 34 to nightly 36. It will take 3 to 5 days.
lalitindoria said:
Thanks for the great ROM Cips It works great and smooth.
I've made a video tutorial and another tutorial on my Blog which beginners might find useful. Find the tutorial here http://www.blogotechblog.com/2012/03/cyanogenmod-nightlies-lg-optimus-me-p350/
Video
Screenshots are attached
Press Thanks if you like it
Click to expand...
Click to collapse
thanks for screenshots tonight i will add this on main post
lalitindoria said:
i have updated my post cips hope you like it. Thanks for the rom
Click to expand...
Click to collapse
i added your photo to main post. Thanks
new omfgb rom compiled from sources
guys, friends just look at new upacoming rom for p350.
http://www.youtube.com/watch?v=ZNP99hgNchw
It crashes and stock on the pinguin. I wipe all and the android secure too. How can i fix it? thanks.
off: sory bad english
cips gokhle said:
i'm updating nightly 34 to nightly 36. It will take 3 to 5 days.
Click to expand...
Click to collapse
Will offline charging work when you update nightly 34 to nightly 36, and what will be new in nightly 36 (which bug will be fixed)? Thanks for the previous answer, your tutorials are very useful, keep going like that.
Dacky82 said:
Will offline charging work when you update nightly 34 to nightly 36, and what will be new in nightly 36 (which bug will be fixed)? Thanks for the previous answer, your tutorials are very useful, keep going like that.
Click to expand...
Click to collapse
in nightly 36 offline charging working. Fm bug fixed and some other bug fixed by cyanogenmod. Today i will upload nightly 36.
corstia said:
It crashes and stock on the pinguin. I wipe all and the android secure too. How can i fix it? thanks.
off: sory bad english
Click to expand...
Click to collapse
try to reflash rom but now don't wipe android secure
changelog for nightly 36
08-03-2012
updated to nightly 36
fm bug fixed
same small bug fix by cyanogenmod
sorry for no offline charging.i tried but i face stuck at kernel logo problem
Where's the download link
Sent from my LG-P350 using Tapatalk
nirav07 said:
Where's the download link
Sent from my LG-P350 using Tapatalk
Click to expand...
Click to collapse
http://www.mediafire.com/?sbjupuhu5mxwgnb
This is My new thread for my CM 9 builds built from source with the help of the cmhtcleo team (milaq) and ngiordano.
D.O.G. (D)a(O)tha(G)uy is a modified CyanogenMod 9 compiled from source with a few extra features built in.
*Tytung's ICS 3.6 kernel(credits to Tytung the great)
*Swipable keyboard from Tytungs CM9( Thank you and credits to Tytung the great)
*Soft keys enabled as default.
*Mifile manager so you can access your apps on your sd card.
*SuperSu added instead of the regular Superuser
system partition is 250mb/7mb cache
Everything should work now
ICS Gapps are included.
V1a
clk is the main build working on magldr.
link :
http://d-h.st/ZRd
more style coming soon
How is this any different from the CM9 nightlies?
Zorua said:
How is this any different from the CM9 nightlies?
Click to expand...
Click to collapse
Video recording works. And it was compiled on my computer using debian.
Is NativeSD version in pipeline?
Sent from my HD2 using Tapatalk 2
sbhas2k said:
Is NativeSD version in pipeline?
Sent from my HD2 using Tapatalk 2
Click to expand...
Click to collapse
I'm working on that.
Good to see you back developing bro. I'll test it as soon as you get a MGLDR version
Sent from my SGH-T959 using Tapatalk 2
mexicandroid said:
Good to see you back developing bro. I'll test it as soon as you get a MGLDR version
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
all you have to do is flash the magldr zip from cm 9 nightlies i think it should work.
how about making a theme for me please. we could be team daothaguy
10/17/2012 daothaguy updated.
Everyone Im taking a one to two day break on the daothaguy regulars because im downloading cm10 sources to try and build a hd2 jelly build wish me luck. if i see that i will be getting no where than on the second day ill compile a fresh cm9 build thanks for your support and patience.
My sources on my computer is messed up until I can get the surfaceflinger problem fixed compiling is on hold.
i figured out the problem why the build was not compiling for the surfaceflinger.o i deleted the line in the surface.cpp concerning the EVENT_FORCE_COMPOSITION. it was being checked forced and it wouldnt allow for it so i deleted it and it worked. so i will be uploading the new build today. Thanks for all your support. 500 downloads for my last build so there is alot who love this build especially since no one posted complaints im content
updated to build 10/22/2012
Im still here I didnt forget about all the HTC HD2 users. Im working on some new things. Just finished compiling Gingerbread CyanogenMod right now downloading jellybean source from AOSP well see how that turns out.
SuperjellyNow for the HTC Desire ported to the HTC HD2 looking for some testers you wont be disappointed.
[email protected] said:
SuperjellyNow for the HTC Desire ported to the HTC HD2 looking for some testers you wont be disappointed.
Click to expand...
Click to collapse
ill give it a whirl
Kameirus said:
ill give it a whirl
Click to expand...
Click to collapse
i pm you the link.
[email protected] said:
i pm you the link.
Click to expand...
Click to collapse
got it
gonna flash when i get back from the store
and then will let ya know how it goes
Ok I have a MIUI JB ROM but i didnt upload it yet. still testing it out but it runs fast.
[email protected] said:
i pm you the link.
Click to expand...
Click to collapse
Thx for the work, I'd like to test it too.
micavimale said:
Thx for the work, I'd like to test it too.
Click to expand...
Click to collapse
i pm you the link also
Hi guys! I made my first ROM based on SmoothieICS and CM9 RC5!
Since I'm rushing to go somewhere... I'll just put up a link for the download...
MODS in init.d folder
QC Xtive Jetlauncher
Added Trebuchet Launcher
Changed Dalvik heapsize
Changed the Dalvik permissions
Very clean somehow
Some more that i forgot because have to go right now!
LINKS here! https://www.dropbox.com/s/c4iln69bikjczz3/SmoothieICS Wonder V3.zip
KNOWN ISSUES
* Random reboots
* Still in Kernel 2.6 (Can be updated)
Flash these things below for moar power!
Crossbreed
Android 4.0 to 4.2
Gapps
Disable CPU rendering
Download these for personalization!
Vire Launcher
hTC Butterfly Wallpaper for launcher
nice! new developer :good:
TiTAN-O-One said:
Flash these things below for moar power!
Crossbreed
Android 4.0 to 4.2
Gapps
Disable CPU rendering
Download these for personalization!
Vire Launcher
hTC Butterfly Wallpaper for launcher
Click to expand...
Click to collapse
What's crossbreed? And isn't a must to flash GAPPS, otherwise there's no Google Play? Can we flash kernel 3.0 externally?
Sent from my GT-I8150 using xda premium
hope you coming back soon to adding specific information for customization you have made.
thank you
K! I'm back! I have to go wash up and I'll update this soon! Stay tuned!
Currently planning to Develop a CM9 Based ROM :3
CNY visiting ah? I'm from SG too
Sent from my GT-I8150 using xda premium
imadiu said:
CNY visiting ah? I'm from SG too
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Yay! And no... From IMM!
Currently planning to Develop a CM9 Based ROM :3
imadiu said:
What's crossbreed? And isn't a must to flash GAPPS, otherwise there's no Google Play? Can we flash kernel 3.0 externally?
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
1. Crossbreed is like Seeder s but with Ad block included ONLY in browsers... :thumbup:
2.Yes, it is a must to flash Gapps otherwise you won't have Google Apps
3. I don't know about that one but I will update that since I just remembered about boot.IMG is actually the kernel!
Currently planning to Develop a CM9 Based ROM :3
TiTAN-O-One said:
1. Crossbreed is like Seeder s but with Ad block included ONLY in browsers... :thumbup:
2.Yes, it is a must to flash Gapps otherwise you won't have Google Apps
3. I don't know about that one but I will update that since I just remembered about boot.IMG is actually the kernel!
Currently planning to Develop a CM9 Based ROM :3
Click to expand...
Click to collapse
Alright then... Gonna give it a try then. Living in the west?
Sent from my GT-I8150 using xda premium
imadiu said:
Alright then... Gonna give it a try then. Living in the west?
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
I'm updating this later with 3.0 ... And yea, I live on the West!
Currently planning to Develop a CM9 Based ROM :3
TiTAN-O-One said:
I'm updating this later with 3.0 ... And yea, I live on the West!
Currently planning to Develop a CM9 Based ROM :3
Click to expand...
Click to collapse
Yeah. Just replace the boot.img. Good to see even Singaporeans are cooking roms. Are you developing or cooking?
imadiu said:
Yeah. Just replace the boot.img. Good to see even Singaporeans are cooking roms. Are you developing or cooking?
Click to expand...
Click to collapse
I don't know the difference really... And I'm REALLY REALLY glad there is Singaporeans owning thia device! Because i saw this man holding a SGW... Im not alone! If I don't have knowledge about phones... I would already bought an Ace 2
Currently planning to Develop a CM9 Based ROM :3
TiTAN-O-One said:
I don't know the difference really... And I'm REALLY REALLY glad there is Singaporeans owning thia device! Because i saw this man holding a SGW... Im not alone! If I don't have knowledge about phones... I would already bought an Ace 2
Currently planning to Develop a CM9 Based ROM :3
Click to expand...
Click to collapse
From what i've learn, developing is practically starting from scratch, writing codes and stuffs like that. Cooking is basically using the programme cygwin (what i've used previously) to alter another rom to suit your own preference, editing and stuffs like that. SGW is actually a good phone, just that it's single-core, otherwise, it will hit the high-end phone mark.
---------- Post added at 08:57 PM ---------- Previous post was at 08:55 PM ----------
Btw, if possible add in a flashable TouchWiz UI zip file. I find it more snappy than trebuchet.
imadiu said:
From what i've learn, developing is practically starting from scratch, writing codes and stuffs like that. Cooking is basically using the programme cygwin (what i've used previously) to alter another rom to suit your own preference, editing and stuffs like that. SGW is actually a good phone, just that it's single-core, otherwise, it will hit the high-end phone mark.
---------- Post added at 08:57 PM ---------- Previous post was at 08:55 PM ----------
Btw, if possible add in a flashable TouchWiz UI zip file. I find it more snappy than trebuchet.
Click to expand...
Click to collapse
Hmm... Okcan! But I warn you... Touch wiz still has a bug on it... And I'll do a separate thread because the Original developer of this ROM has to concentrate on his exams so I'll just go on this way... Any changes will be done in a sperate thread
Currently planning to Develop a CM9 Based ROM :3
BTW! I'm using Ubuntu because my computer is very slow... My netbook at fault.. So idk whether I'm a chef etc!
Currently planning to Develop a CM9 Based ROM :3
TiTAN-O-One said:
Hmm... Okcan! But I warn you... Touch wiz still has a bug on it... And I'll do a separate thread because the Original developer of this ROM has to concentrate on his exams so I'll just go on this way... Any changes will be done in a sperate thread
Currently planning to Develop a CM9 Based ROM :3
Click to expand...
Click to collapse
Really? What bug? Btw, where can I find the crossbreed?
Sent from my GT-I8150 using xda premium
Crossbreed (http://forum.xda-developers.com/showthread.php?t=2113150) from the Xperia Arc forum.. I'll go find the original one... You go look first! And touch wiz launcher will skip your wallpaper if you go to the end of the home screen... I'm not feeling well today... I'll update this someday! Hope you understand!
Currently planning to Develop a CM9 Based ROM :3
Her you go! Original link! http://forum.xda-developers.com/showthread.php?p=37062006:D
Currently planning to Develop a CM9 Based ROM :3
Thanks. Alright. Gws
Sent from my GT-I8150 using xda premium
Thanks for miroslav_mm's kernel source .
change log(the same with miroslav_mm)
Changes in the system:
* Mass Updates CM;
* Update to Android 4.4.4 - KTU84P
* Bionic NEON optimization;
* Fix ffmpeg codec conflicts;
* Etc.
Click to expand...
Click to collapse
BUGS:
1.Front camera is not working,
2.weakness vibrator
3.report to me
Installation Instructions:
1.update your recovery to 6.0.4.x
2. Put the files on SD card.
3. Reboot to recovery.
4. Do factory reset (ie. format /data, /cache, /sd-ext and /sdcard/.android_secure)
5. Flash ROM
6. Reboot
Click to expand...
Click to collapse
Download link for ROM
http://pan.baidu.com/s/1pJCyvcn
pass: 65am
If you want to support me ,just pay for a cup of cofface (paypal:[email protected]):fingers-crossed::fingers-crossed:
sorry for my poor english
lenghonglin said:
Thanks for miroslav_mm's kernel source .
This rom can normally use,But there still have a little bugs:
1.Front camera is not working,
2.weakness vibrator
3.report to me
Click to expand...
Click to collapse
i am using this roms. flashed it yesterday. its good.best thing is based on 3.4 kernel
still.........
rom lags some time...but its fully functional for daily use,
1. Camera working good full hd supported. but not better than original lg cam.
2. battery life is better than other cyanogenmod but not better than sphinx 4.1 or v30d roms
3. custom cpu seting.
4. root working
5. what u can do is replace camera with JB custom camera for cyanogenmod, its better.
few screen shots
chinese？
abuulala said:
i am using this roms. Flashed it yesterday. Its good.best thing is based on 3.4 kernel
still.........
Rom lags some time...but its fully functional for daily use,
1. Camera working good full hd supported. But not better than original lg cam.
2. Battery life is better than other cyanogenmod but not better than sphinx 4.1 or v30d roms
3. Custom cpu seting.
4. Root working
5. What u can do is replace camera with jb custom camera for cyanogenmod, its better.
download link for rom
http://pan.baidu.com/s/1pjcyvcn
pass: 65am
u have to flash it through cwm recovery 6.0.4.5
after full 4 wipes
few screen shots
Click to expand...
Click to collapse
中国人？
lenghonglin said:
中国人？
Click to expand...
Click to collapse
i cant understand u. im a Pakistani.
i downloaded it from a chinese site and im using it.
abuulala said:
i cant understand u. im a Pakistani.
i downloaded it from a chinese site and im using it.
Click to expand...
Click to collapse
I am sorry that i think you are chinese ,Why do you konw i post this thread with 3.4 kernel so fast?:laugh:
lenghonglin said:
I am sorry that i think you are chinese ,Why do you konw i post this thread with 3.4 kernel so fast?:laugh:
Click to expand...
Click to collapse
i saw this post on some chinese site. and then used google translator and followed it for few days and got this rom link. its an excellent kit kit rom. best so far. thanks for all the work.
i am using this rom its 3rd day now. everything working great. it is the KITKAT rom we all been waiting for.
abuulala said:
i am using this rom its 3rd day now. everything working great. it is the KITKAT rom we all been waiting for.
Click to expand...
Click to collapse
I will build cm10.1 with 3.4 kernel soon
Link Down, Any Mirror or someone can re-upload it.
Yes, the link is dead. Please upload on mediafire or google drive.
sixline said:
Yes, the link is dead. Please upload on mediafire or google drive.
Click to expand...
Click to collapse
took a long time, due to slow internet.
here it is...............
https://drive.google.com/file/d/0B9raPQozMhCMc2plMVoxSnpJUzA/edit?usp=sharing
OP (or anyone else) have you tried switching to ART? What is the performance and battery life on ART?
sixline said:
OP (or anyone else) have you tried switching to ART? What is the performance and battery life on ART?
Click to expand...
Click to collapse
i was using it on dalvik myself, and dalvik is default setup, has switched to ART to try this feature. Its working great, will assess it and post about it after some use in 1 or 2 days.
ART is running smooth, don't use xposed framework because even in dalvik or ART, device become laggy
Yeah I know that, thanks.
sixline said:
Yeah I know that, thanks.
Click to expand...
Click to collapse
after using ART some softwares become incompatible. like my titanium backup is not running now and Lg JB camera moded for cyanogenmod is not running/ cant install it again.
abuulala said:
took a long time, due to slow internet.
here it is...............
https://drive.google.com/file/d/0B9raPQozMhCMc2plMVoxSnpJUzA/edit?usp=sharing
Click to expand...
Click to collapse
Thanks a lot Buddy, Much Appreciate-able... :cheers: :good:
Still abit laggy and camera is really suck ! But battery is better ...
Sent from my LG-LU6200 using Tapatalk 2
-ss- said:
Still abit laggy and camera is really suck ! But battery is better ...
Sent from my LG-LU6200 using Tapatalk 2
Click to expand...
Click to collapse
change camera to lg JB camera for cyanogen. link in this forum i think sixline rom thread
Disclaimer!
I am NOT responsible for anything that happens to your phone, house, and (not limited to) your pet hamster. You are responsible for your actions, and don't blame me when you have a brick with glass on the back.
Matr1x:
base on Jake's port.
AK:
base on brothaedhung's port.
Franco
base on ThatKawaiiGuy's port.
MiRaGe
base on Jake's port.
Hells Doctor
hells-Core
changelog:
(15/04/15):
HC b71-L. (for 5.1.0)
Franco r217. (for 5.1.0)
HD Numeriks 0403.
(17/03/15):
HD Numeriks 0317.
HC b70-UTC-L.
(21/02/15):
HD 0217. (DT2W and S2W Fix.)
HC b69-L. (DT2W and S2W Fix.)
Franco r216.
MiRaGe 0220.
(15/02/15):
Hells Doctor FrAndroid 0205 with stock camera.
Hells-Core-b69-t4-L with stock camera.
(13/02/15):
Franco r215 with stock camera.
Mirage 0205 with stock camera.
(04/02/15):
Matr1x v14.5 with stock camera.
AK v600 with stock camera.
download:
geehrc-Kernels-lollipop
If WiFi doesn't work after flashing the kernel, try flashing the Revert_Wifi_Fix.zip.
---------------------------------------------------------------------------------------------------------------------------------
To maximize the capabilities of kernels, flash:
UKM
install the Synapse app from the playstore,
and remove or disable Trickstermod, Faux control, or any in-ROM kernel control apps and settings.
there are some great AK and HD profiles on synapse for mako, which run well on gee too. check it here and here.
To import Synapse profiles
Download profile and save to the saved_profiles folder inside your Synapse folder.
Make sure you're using the latest UKM script
In Synapse, go to profiles
Select the profile, be sure to click the check mark on top and then select restore.
Restart Synapse
When it restarts, select the X, not the √.
Sometimes you have to restart synapaenagain to see updated CPU settings.
---------------------------------------------------------------------------------------------------------------------------------
sources:
https://github.com/justin0406
kitkat
download:
gee-Kernel
THANK TO:
-Xboxfanj for no reason
-brothaedhung for the great port
-ThatKawaiiGuy for help
-oubeichen for the led fix
-faust93 for the autofocus fix
*fixed the Gee camera.
What does that mean?
Thanks again for this!
Sent from my LG-LS970 using XDA Free mobile app
Whiplashh said:
*fixed the Gee camera.
What does that mean?
Thanks again for this!
Sent from my LG-LS970 using XDA Free mobile app
Click to expand...
Click to collapse
https://github.com/justin0406/AK-xGenesis/commit/bf871045a53426c6fc336e4d93cc6afaf8795e7e
new MiRaGe uploaded.
AK 340 uploaded.
JustinXu said:
new MiRaGe uploaded.
AK 340 uploaded.
Click to expand...
Click to collapse
Awesome dude!!!
Hey @JustinXu good work!
Edit: it was my fault with Disable Service app, bt ok , all working good
Thanks dude!
And thanks to @Cameron581 for doing the initial commits for the extra governors.
ThatKawaiiGuy said:
Thanks dude!
And thanks to @Cameron581 for doing the initial commits for the extra governors.
Click to expand...
Click to collapse
The cores issue is from some sort of hotplug issue
Sent from my Moto G using Tapatalk
AK 345.
JustinXu said:
AK 345.
Click to expand...
Click to collapse
Are you no longer updating AOSP versions?
ThatKawaiiGuy said:
Are you no longer updating AOSP versions?
Click to expand...
Click to collapse
i'm using pa with the cm one, and no one ask me for the aosp one.
JustinXu said:
i'm using pa with the cm one, and no one ask me for the aosp one.
Click to expand...
Click to collapse
I'll try cm on axxion then and report back
---------- Post added at 11:58 AM ---------- Previous post was at 11:47 AM ----------
JustinXu said:
i'm using pa with the cm one, and no one ask me for the aosp one.
Click to expand...
Click to collapse
I'm sorry, it was a no go.
May I please request?
ThatKawaiiGuy said:
I'll try cm on axxion then and report back
---------- Post added at 11:58 AM ---------- Previous post was at 11:47 AM ----------
I'm sorry, it was a no go.
May I please request?
Click to expand...
Click to collapse
time to sleep now in china, i'll do it tomorrow.
please keep updated the aosp one too, the cm one is not working on carbon and slimkat
Trying out these kernels out on the latest AxxionKat had some... interesting results. Trying the latest Matr1x and MiRaGe both got me a black screen when I booted my phone though oddly enough I could still access my phone's data by plugging it in normally. With AK though I at least got an image though it was a massively distorted version of what the first time welcome screen should normally be. All clean flashes. Factory resetting didn't help either. I feel like I'm missing something obvious here. Any help?
You'll need a mod version of these kernels with axxionkat rom
gentlemenace said:
Trying out these kernels out on the latest AxxionKat had some... interesting results. Trying the latest Matr1x and MiRaGe both got me a black screen when I booted my phone though oddly enough I could still access my phone's data by plugging it in normally. With AK though I at least got an image though it was a massively distorted version of what the first time welcome screen should normally be. All clean flashes. Factory resetting didn't help either. I feel like I'm missing something obvious here. Any help?
Click to expand...
Click to collapse
When you get funky display errors on a rom, it means you need to use a different kind of kernel. You'll need the AOSP versions to run my roms, carbon, and slimkat
ThatKawaiiGuy said:
When you get funky display errors on a rom, it means you need to use a different kind of kernel. You'll need the AOSP versions to run my roms, carbon, and slimkat
Click to expand...
Click to collapse
Thanks. I had assumed that since I saw some CM cherry picks in your ROM that it was CM-based but I guess not. I guess having a few CM apps doesn't really mean anything. Thanks for clarifying that. AxxionKat is excellent by the way. Probably one of the best ROM experiences I've had on this phone.
gentlemenace said:
Thanks. I had assumed that since I saw some CM cherry picks in your ROM that it was CM-based but I guess not. I guess having a few CM apps doesn't really mean anything. Thanks for clarifying that. AxxionKat is excellent by the way. Probably one of the best ROM experiences I've had on this phone.
Click to expand...
Click to collapse
Thanks! That means a lot!
My Rom is actually cm based, but with my luck, all of my roms require AOSP kernels. Even though I've wiped my hard drive numerous times.
somethings new:
Matr1x-gee-130814-aosp;
AK.345.GEE; (aosp)
AK.345.GEE.CM.+.