I flashed to LiquidSmooth v1.4 for GSM from the thread here, but when I check About Phone, it says:
Build Number: Liquid ICS v1.35
Kernel Version:
3.0.8-franco.Kernel-Milestone3
Mod Version:
liquid.maguro.042612.193406
Could be a build.prop error. Check the 1.4 changelog from the thread and see if the new features are evident, might be a place to start.
Sent from my Galaxy Nexus using XDA
Have you tried to just re flash and see if that was the problem? You shouldn't lose any data.
Related
Hey all, mega n00b here
My story; I was running Froyo on my P1000 until last week, Kies told me there was an upgrade available to 2.3.3 GB which I undertook.
I took exception to the navigation button lights always on. I looked and searched all over for fixes and tried in vain to root my tab. I even installed a new Kernel that was supposed to be rooted - it installed but no root!? PLUS my WIFI was now f***ed and either would not connect or continuously dropped.
Anyway, the installed kernel had CWM Recovery in it.
I found another post that led me to the Overcome ROM & Kernel.
I installed the Kernel first and was shi**ing bricks when all that happened was the word "andriod" flashing on the screen!
After friggin about with CWM I found I could load the ROM from the external SD which I duly did and Voila a working Tab, and boy is it slick.
Now, I have two questions - any and all help greatly recieved:
1.) What is up with the website for the install guide and other files?
2.) What do I need to do to install a modem and which one is most suitable for my tab I am in UK on Vodafone.
Device Details:
Model Number: GT-P1000
F/W version: 2.3.3
Baseband version: P1000XXJPZ
Kernel version: 2.6.35.7 Overcome-v4.0.0 #40
Build number: Overcome 7 Series v4.0.0
IDK and no
OK
So, no modem needed? ...I've not tested the 3G data on the Tab yet.
I found the issue with the w/s...
http://forum.xda-developers.com/showpost.php?p=18751328&postcount=131
...from the horses mouth so to speak.
EDIT: Tested 3G and all is perfect!
I just flashed KWIQ Rom (0.5) and after flashing I get very low data connection speeds (sometimes 1x with 1 out of 5 bars filled) and I am not sure what I am doing wrong. I wiped the device, dalvik & cache, formatted the SD Card and slowly added all my apps back.
Here are my specs:
Android Version: 2.3.7
Baseband Version: 2.15.00.0808
Kernal Version: [email protected] #9
CRU info: ARMv7 Processor rev 2 (v71)
Mod Version: KWQ-SZ-01
Build number: KWIQY 0.5
Can someone help me? I'd greatly appreciate it!
keychee said:
I just flashed KWIQ Rom (0.5) and after flashing I get very low data connection speeds (sometimes 1x with 1 out of 5 bars filled) and I am not sure what I am doing wrong. I wiped the device, dalvik & cache, formatted the SD Card and slowly added all my apps back.
Here are my specs:
Android Version: 2.3.7
Baseband Version: 2.15.00.0808
Kernal Version: [email protected] #9
CRU info: ARMv7 Processor rev 2 (v71)
Mod Version: KWQ-SZ-01
Build number: KWIQY 0.5
Can someone help me? I'd greatly appreciate it!
Click to expand...
Click to collapse
Have you tried flashing different kernel? Mason's for example. Or maybe flash sense 1.0 rom update profile and prl.
Sent from my lair.
volk9029 said:
Have you tried flashing different kernel? Mason's for example. Or maybe flash sense 1.0 rom update profile and prl.
Sent from my lair.
Click to expand...
Click to collapse
I will try that tonight and keep you posted. Thanks
So I flashed Mason's kernal and my data connection was PERFECT. Now I will work on updating the profile and prl because I am still experiencing the freezing issue. Thanks for your help. If you have any additional suggestions outside of updating the profile and prl for the freezing issue let me know! (General statement for anyone)
I am using AOKP Milestone5 Rom with baseband version i9250xxLA2
I got data drop problem ! someone say baseband i9250xxkk6 will fixed the data drop problem !
where can I get the baseband i9250xxkk6 and install it on my phone.
I am getting the AOKP Milestone5 rom from http://forum.aokp.co/page/releases/_/milestone-5-r20
I can not find the xxkk6 on AOKP releases page !!!!
http://forum.xda-developers.com/showthread.php?t=1405345
or
http://rootzwiki.com/topic/24824-radio-gsm-galaxy-nexus-i9250-baseband-dumps-collection-discussion/
Note: Obviously, these are for GSM phones.
I! D! K!
Try posting in the Q&A forums ! !
Lol sorry liked the use of your exclamation points.
hki_peter said:
I am using AOKP Milestone5 Rom with baseband version i9250xxLA2
I got data drop problem ! someone say baseband i9250xxkk6 will fixed the data drop problem !
where can I get the baseband i9250xxkk6 and install it on my phone.
I am getting the AOKP Milestone5 rom from http://forum.aokp.co/page/releases/_/milestone-5-r20
I can not find the xxkk6 on AOKP releases page !!!!
Click to expand...
Click to collapse
That's a ROM project page, so there won't be any RADIO's there...
If I were you, I'd try the corresponding GNex development subforum and their RADIO stickies, like this one.
But if you're on XXLA02, keep in mind that it's the latest official GNex radio image
and do a search, don't aggravate mods
JosepiOT said:
http://forum.xda-developers.com/showthread.php?t=1405345
or
http://rootzwiki.com/topic/24824-radio-gsm-galaxy-nexus-i9250-baseband-dumps-collection-discussion/
Note: Obviously, these are for GSM phones.
Click to expand...
Click to collapse
after downlaod cwm-radio-i9250-xxkk6.zip, it is just copy to GN and install with cwm --> select install zip file, do I need wipe clean after compiled install ?
XXKK6
- Standard European baseband
- Originally from the yakju ICL53F factory image and the OTA update (ICL53F from ITL41F)
ICL53F is for CDMA/LTE, but I am using GSM version !!!!!!! where can I get the XXKK6 for GSM version
There's a bug in the AOKP M5 kernel which causes data drops. Flash Franco M3 for a temporary fix.
android baseband file don't have CDMA and GSM version ! so doesn't matter which phone are you install with ?
I have a Verizon Note II that I have switched over to T-Mobile. Everything works perfectly, except when I flash a T-Mobile ROM, WiFi does not work.
I have tried JediX and a couple others. I never did the official 4.3 Verizon Update.
Can anybody help me get WiFi (and WiFi calling) working?
Thanks!
What ROM and kernel is your phone currently on ?
Sent from my SGH-T889 using xda app-developers app
ciphercodes said:
What ROM and kernel is your phone currently on ?
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Right now I am running
PACMAN ROM Build Number: pac_i605-userdebug 4.3.1 JLS36I eng.root.20131226.100804 test-keys
Kernel Version: 3.064-CM-g9d16c8a
Baseband Version: i605CRAMC3
Everything works, with the exception of T-Mobile WiFi calling, which is not in this AOKP based ROM. This is what I was running when the phone was still on Verizon... I am able to put in the T-Mobile SIM and the APNs pop up, giving me H+, 3G, etc.
I tried flashing
ConchRepublicEdition2s
GE-Wiz_Release-8
JediMasterX2
All three of those flash and run fine, but WiFi is completely borked (try to enable it, and the slider goes immediately back to OFF)
I am OK with running 4.1 instead of 4.3 if that gets the WiFi calling working.
Thanks!
With Jedi MasterX2 installed:
Android Version: 4.3
Baseband Version: I605VRAMC3
Kernel Version: 3.0.31-2085660 [email protected] #1 Tue Nov 19 16:53:20 KST 2013
greekchampion04 said:
With Jedi MasterX2 installed:
Android Version: 4.3
Baseband Version: I605VRAMC3
Kernel Version: 3.0.31-2085660 [email protected] #1 Tue Nov 19 16:53:20 KST 2013
Click to expand...
Click to collapse
Try flashing agni or devil kernels. That may get you closer...
Hastily spouted for your befuddlement
Thanks, I'll give the Kernels a shot
greekchampion04 said:
Thanks, I'll give the Kernels a shot
Click to expand...
Click to collapse
best option is to flash the vzw 4.3 modem/firmware via odin first and then jedi x2 will work just fine. thats what i did and everything works for me except i havent been able to unlock the LTE baseband yet, scratching my noggin on that one
As an update to anyone who may be watching this thread, I got it to work by installing Jedi Master 18.
Verizon Note II (i605) now works with T-Mobile SIM and WiFi calling.
Link: http://forum.xda-developers.com/showthread.php?t=1958230
Thanks to all who stepped up to help me!
After creating a Nandroid backup, I flashed the KT747 kernel on my Galaxy S3 I747 (Bell). The flash seemed to finish without any errors, but after rebooting, it just gets stuck on the Ktoonsez "kernel domination" logo screen. I wiped the cache and dalvik cache like the guide told to do. I tried doing this before the kernel install and after the install. The soft keys flash and vibrate on touch, and the notification light flashes, but it just stays on this screen for a few minutes until it turns off.
Am I using the right version of the kernel for my device/rom? I can only seem to find the kernel listed below from http://forum.xda-developers.com/showthread.php?t=1756776 . Details are below. If I am using the wrong kernel version, could someone please give me the correct link. If it is the correct version, what could be going wrong?
Thanks in advance.
Attempted Kernel: KT747 AOSP KK ATT 07-10-2014
Currently installed kernel: [email protected] # 1
Rom: CyanogenMod 11-20140226-snapshot-installerxnpq09q-d2att
Recovery: ClockworkMod 6.0.4.7
Android version: 4.4.2
Build number: cm_d2att-userdebug 4.4.2 KOT49H InstallerXNPQ09Q release-keys
I see two potential issues and they are:
you are running an older version of CM11 and the kernel was released a few months months after your version of CM11; and
the kernel is for use with AOSP and TW ROMs, not CM ROMs.