Develop Bugs

[APP] Barometric - Barometer app and widget for Galaxy Nexus

A good while ago, when I got my Xoom I almost finished a barometer app. Unfortunately the project was put away, but inspired by korr92's post today I decided to do some work on the app.
It is in early alpha, and there are still some bugs to iron out (see post below). But, I need feedback, so feel free to try it out.
Beware that I'm planning to release this as a paid app on the Market when (err...if) I finish it. But, it will stay free for a while, and I will post well before an eventual release so that you can download the app for free.
The regular app will update the pressure almost instantly, while the widget will update when the devices wakes up, or every 10 minutes if the device stays awake .
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:
Application is attached to this post, and can also be downloaded from here.

Changelog:
2012-01-22:
-Widgets are now available in both 2x2 and 3x3 sizes.
2012-01-17:
-Enabled hardware acceleration and made improvements to the application so that hardware acceleration works as it should
-Reduced size of images used. Smaller APK.
2012-01-16:
-Improved graphics both in application and widget. The barometer now contains text ("Stormy", "Rain", "Change", "Fair" and "Very dry") describing the weather associated with the current pressure.
-Reduced size of APK
-Main application now has a "historic dial", which can mark a previous pressure value. To set it just tap the barometer, and it will be set to the current value. It will be stored until you tap the barometer again.
-Widget will now update every 30 second when the device is awake. It will not update when the device is asleep, unless other applications update. If this happens the barometer widget will also be updated.
Known bugs:
-Sometimes the pressure will be show as zero (the dial points straight up). This is some minor bug that I have yet to track down, where the service that updates the pressure is getting killed before the pressure is received.
Update: I think I have solved this now.
Planned features:
-Set the altitude, as this influences the pressure
-Mark in the barometer the corresponding weather for pressure values (e.g. illustration of a sun when the pressure is high) (DONE)
-More widget sizes (DONE)
-Graphing feature
-Trend
-Pressure reading in text
-Whatever you may suggest

pretty neat gunna check this out
great work btw

hiohokaybye said:
pretty neat gunna check this out
great work btw
Click to expand...
Click to collapse
Thanks a lot!
Did you experience the bug I listed in the second post? It seems like it is rather inconsistent, and a little harder to track down than I thought.
I will try to get some work done on the app tonight, hopefully accompanied by the upload of a new build.

Theres no Widget

That's strange. I did a clean install on my Xoom, and the widget is there. It also works in the phone and the emulator(s). Is the widget missing for anyone else?

Hope you iron out this, looks like it could be amazing.
Swyped from my tuna surprise with extra back bacon.

Thanks nitrox1!
New update is out now. See changelog in second post

This is what I see:
Sent from my Galaxy Nexus using Tapatalk

hpe said:
That's strange. I did a clean install on my Xoom, and the widget is there. It also works in the phone and the emulator(s). Is the widget missing for anyone else?
Click to expand...
Click to collapse
I've got the widget on rooted galaxy nexus 4.0.3

I downloaded it but it says "cannot open file" looks awesome though

NPuter said:
This is what I see:
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
I have the same problem
Sent from my Galaxy Nexus using xda premium

It seems to work. I will have to keep an eye on it for the rest of the week, there are supposed to be some big storms this week.
The widget is very large. It would be nice to have one that is 1x1, maybe a digital readout with a trending arrow.
Sent from my GalaxyNexus using XDA App

NPuter said:
This is what I see:
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
dudeimgeorge said:
I have the same problem
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I'm pretty sure, you must disable "force GPU-Rendering" in your dev-settings like in the other Barometer-App, too

Hardware acceleration is a good thing, so I have now explicitly enabled hardware acceleration, and made the necessary adjustments to the app so that it works with hardware acceleration. In other words, a new build is out.
Regarding failed downloads: I suspect that the downloads from XDA are not always stable. Have uploaded the build to my Dropbox account as well. Download link can be found in the first post.
Now, off to my day job. Next feature coming up is input of your altitude, so that the barometer is calibrated.

Gonna try it. Will report back later this day!

creektrails said:
I downloaded it but it says "cannot open file" looks awesome though
Click to expand...
Click to collapse
Try downloading from the Dropbox link in the first post. I suspect that XDA attachments are not that reliable.
scouter68 said:
It seems to work. I will have to keep an eye on it for the rest of the week, there are supposed to be some big storms this week.
The widget is very large. It would be nice to have one that is 1x1, maybe a digital readout with a trending arrow.
Sent from my GalaxyNexus using XDA App
Click to expand...
Click to collapse
Smaller widgets are on the planning board. What sizes do you think will work?

Here's what I see:

-Michael_ said:
Here's what I see:
Click to expand...
Click to collapse
Hope that's what you wanted to see as well. Now get outside and enjoy the sun, the weather seems to be nice where you are

Haha Yeah! Thanks for the app. Looks good.

[Design] NPC-UI ........................[23.07.12]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a little overlay I created over the past days to make my phone look a little better and I thought I should share it with you guys
Sadly most of the overlay is part of the Wallpaper, which forces you to have the same layout, but I will clear the mess in the PSD and upload it for you. Maybe I will even let you request the displayed shortcuts.
But lets get started now:
These are the actual touch areas:
As you can see this overlay was created with the ParanoidAndroid-Rom as a base. Since it doesnt need major theming or modding you can easily apply it on other ROMs, but the postioning might be off a little. If that is the case, plz make a screenshot and I will adjust the wallpaper, so that it fits.
Ok now for the Setup:
Requirements:
-Nova Launcher (or any other Launcher, that lets you replace icons)
-UCCW (UltimateCustomClockWidget its free on the play store)
-Wallpaper and Uzips
-Uzips 2 (only if the first uzips didnt work properly!!!)
Nova Launcher:
-disable page indicator
-disable line between dock and homescreen
-reduce homescreen count to 2 homescreens
-grid size is 6 rows and 5 columns
-everything else is up to you^^
UCCW:
-install the app from the play store
-place the 3 uzip files you downloaded int you UltimateCustomClockWidget folder on your SD card
-open the app, press menu, select import skin and select my skin (3x)
-when you imported the date or weather uzip press settings->more, select a city and click set city [otherwise weather wont be displayed])
Wallpaper:
-simply apply the wallpaper^^
Now add a 4x3 uccw widget and select the clock skin.
Weather is in 5x2, as is the date widget
Add the apps from the app drawe to your homescreen, longpress and release them. Delete the text and select the transparent.png from the downloaded rar file to replace the image. Put those apps right were the touch areas are, which you can see on the screenshots above. Replace the image of the app drawer in the same manner, but with the app-drawer.png file
Here is the PSD file, if you want to change soemthing:
http://www.mediafire.com/?aadq9mww5w0p0gt
This is it for the layout. I hope you like it, and if you do, plz press the "Thanks Button"^^

reserved

wow!very nice man!

WOW~
That's cool
Sent from my Galaxy Nexus

This is great NPC But I recommend you change the font, make it a bit lighter. And set the weather widget/whatever as the touch area to, redirect it to the News&Weather App.

I'm jelly. I wish I had that much creativity.
Sent From My Toro+ via SkyBlue Tapatalk

Release the soft keys for paranoid
Sent from my Galaxy Nexus using Tapatalk 2

arzbhatia said:
This is great NPC But I recommend you change the font, make it a bit lighter. And set the weather widget/whatever as the touch area to, redirect it to the News&Weather App.
Click to expand...
Click to collapse
Thanks for the feedback^^ lighter, really? I thought the font was already very light
Yes I would want that too, but UCCW cant do that if I am not wrong and even if it could, that would require everyone to have the same weather app, which the touch would redirect the user to.

Upstreammiami said:
Release the soft keys for paranoid
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
yep I will. I wanted to throw them into the updated zip, which I wanted to upload today, but since moles said the next build was only hours away I think you will get them with the upcoming 1.8^^

Great Work can you please Share the Wallpaper in Black or Black with German Language ? Thanks

jenzy1985 said:
Great Work can you please Share the Wallpaper in Black or Black with German Language ? Thanks
Click to expand...
Click to collapse
in german text is easily possible^^
If you want a solid black background I can easily do that, but you will lose the boxes around the facebook and twitter icons or the weather, do you want that?

Great, Black Wallpaper without boxes is ok, with German Language Perfekt and original with German Language please, Thanks

jenzy1985 said:
Great, Black Wallpaper without boxes is ok, with German Language Perfekt and original with German Language please, Thanks
Click to expand...
Click to collapse
here you are
http://www.mediafire.com/?z8r6jfvuykkjm5p
I think I will make the second post into some sort of backgroudn collection, so that people can download the ones that already exist instead of me doing the same wallpapers over and over^^

WOW, really great you are the best

Can you please make a Version for User with aktiv Benachrichtigungsleiste. I can't see the Full Twitter Font. In Black ? Thanks

jenzy1985 said:
Can you please make a Version for User with aktiv Benachrichtigungsleiste. I can't see the Full Twitter Font. In Black ? Thanks
Click to expand...
Click to collapse
Yes that no problem, but could you plz upload a screenshot, so that I can see how much I have to move?

Thank you
Gesendet von meinem Galaxy Nexus mit Tapatalk 2

can you make a blank wallpaer in white thankyou
Edit heres what happen when i try to import the clock also the wallpaper is behind my navbar at the bottom meaning icons

what did you do with the lockscreen wallpaper? settings does not seem to be working yet :/

I loved your layout, really clean and colorful! Are you going to release PSD for this, that would be great!
BTW Five
for this! :good:

[THEME] Ironman J.A.R.V.I.S.Q - UCCW skin

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I want to start with saying that this theme is an paid theme through google play but I attached the uzip for the widget to left.
In other word, that one is free of charge and modifiable!.Just wanted to let that be said before anyone goes rampage cause I put a lot
of work in making this. The 4 months of wait for UCCW to implement high resolution support was terrible (not complaining!) ;_;
The last screenshots shows the beta version I created. As for now, the theme takes up the whole screen as you can see in the other screenshots.
To emphasize, I tested this on my Nexus 7, the widgets should fit perfectly.
If you're a N4 user you might have seen it over there as well. I thought I maintain a thread here as well since after all, I'm a N7 owner!
Installing uzip theme files:
Download UCCW and add a UCCW widget to your homescreen, select "uzip" and browse and select the theme.
Download:
Free version: http://ge.tt/6KeYmme/v/0?c (only the battery/clock "jarvisq ring"-widget included):
- Mirror link: http://www.androidfilehost.com/?fid=23501681358554834
Software buttons: http://ge.tt/5rZre1e/v/0?c
Full version:

Looks great! I'm assuming that I flash the soft buttons in recovery?
Sent from my SPH-D710 using xda premium

mjs2011 said:
Looks great! I'm assuming that I flash the soft buttons in recovery?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I hope you did not do it cause it's just a zip with pngs inside xD
I'm using AOKP rom so the feature is built in to the settings where you only have to choose which image to replace with.

please post the full version here
thx

l2azvan said:
please post the full version here
thx
Click to expand...
Click to collapse
I have other free themes that I've created, this is the first one that I charge for.

Links don't work?

riot1031 said:
Links don't work?
Click to expand...
Click to collapse
Works for me, I'll reupload them to dev host when I get home, just in case.

Looks pretty sweet, may have to give that a try sometime.

Ok, one issue I changed some hotspots, now the widget shows up blank (white). I assume just remove the widget and set it up again? Didn't see a refresh setting in UCCW.

metalwraith said:
Ok, one issue I changed some hotspots, now the widget shows up blank (white). I assume just remove the widget and set it up again? Didn't see a refresh setting in UCCW.
Click to expand...
Click to collapse
Did it work out in the end? Sometimes uccw shows white widget when refreshing for a split second, but it should get back to normal right after that.

Didn't do it on my vibrant, so just removed and readded it and edited it all at the same time. Had a few moments where it just showed image place holders and no images.

metalwraith said:
Didn't do it on my vibrant, so just removed and readded it and edited it all at the same time. Had a few moments where it just showed image place holders and no images.
Click to expand...
Click to collapse
Did you maybe consume all the ram available? Another thing, how does the widget look on the vibrant? It got a display of 480 x 800 after all and the theme was recommended to be used on a 720p screen.

Who knows, vibrant i know is pretty much empty software wise. Screens attached.
Sent from my Nexus 7 using XDA Premium HD app

metalwraith said:
Who knows, vibrant i know is pretty much empty software wise. Screens attached.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
You can see the ram consumption in settings, sometimes uccw can take up to 80mb which is one of the reason I recommend this on a phone with at least 720p (those phones usually have decent specs). Thanks for the screenshots, how does it look in real life though? I will assume the text is barely readable?

369mb for memory under the settings.. Running Paranoid Android 2.54 (android 4.1.2). Text ain't too bad, I have it setup in phablet mode anyways to get more space on the home screens.

metalwraith said:
369mb for memory under the settings.. Running Paranoid Android 2.54 (android 4.1.2). Text ain't too bad, I have it setup in phablet mode anyways to get more space on the home screens.
Click to expand...
Click to collapse
That should be enough! You might want to send a letter to the UCCW developer as I never had this issue before. And thanks for telling me that the text was readable, I havent personally tried it on that resolution yet.

still cant be downloaded?

Yeah, I have no idea what is taking google so long to review my account. Just sent them another email (an hour ago) asking them if you're even working.

Gotta love Google... I know one of their things, if an app is downloaded from any updates have to be done through them as well. Not to mention anything within the app can't be downloaded from outside sources either. Do I sense, Apple's methods coming to the play store? lol

metalwraith said:
Gotta love Google... I know one of their things, if an app is downloaded from any updates have to be done through them as well. Not to mention anything within the app can't be downloaded from outside sources either. Do I sense, Apple's methods coming to the play store? lol
Click to expand...
Click to collapse
Yeah, they became very strict about that. Just emailed them earlier today and they said they never got the information about my identity so I had to send them again....

[theme] vector ui homescreen for you!!

Greetings!
Tired of the same layout of your home screens? want to try something new?
Well, I present to you my modified home screen - VECTOR UI
All that you need in one homescreen! PLUS a unique combination of widgets and arts!
AVAILABLE IN WHITE AND BLACK VERSIONS
Well, I initially made it for my Xperia Acros S but the ofcourse, its also for Xperia S, Ion ... share it!
Tell me if you want to try it and I'll post a tutorial how to do it im just sharing..
The pebble inside the circle serves as the icon, once tapped, it'll open the app as named and
ofcourse, once social networking site's name was tapped, it will open as well
​

TUTORIAL
TUTORIAL:
You need to be very patient in doing this one.. but it worth it!
=====
• REQUIRED APPS:
Nova Launcher/Prime – recommended for swipe down to see status bar
Desktop Visualizer
Zooper Widgets
Eye in the Sky widgets
UCCW
Multipicture Live Wallpaper
and a bit patience
If you prefer BLACK : Download the base image from:
https://www.dropbox.com/sh/gbrdcjow96x8vz5/amTEerYVBI#f:BlackFinal copy1.jpg
if your prefer WHITE ownload the base image from:
https://www.dropbox.com/sh/gbrdcjow96x8vz5/amTEerYVBI#f:WhiteFinal copy.jpg
UCCW Battery:
https://www.dropbox.com/sh/gbrdcjow96x8vz5/tywsIacwNv/bat.uzip
Put it in your SD Card.
=====
APPLICATION SET-UP/SETTINGS:
NOVA LAUNCHER:
• 12×12 desktop grid
• Hide status bar
• Hide dock/disable
• Gesture down for status bar (optional prime)
• App label = disable/do not show
————-
Multipicture Live Wallpaper (MPLW)
Menu bar/tap and hold desktop – wall paper – live wall paper.
• Make sure the common settings – Crop/Resize Ratio is FIT TO FULL SCREEN
• Screen 1 settings – picture source – select the file (white or black depends to ur phone)
APPLY WALL PAPER.
———-
EYE IN THE SKY WIDGETS
• Select the forecast and customize your desire color.
I prefer teal since it matches the font color for text/calls/mail
• It will display the icons of clouds etc… so i made it thinner to hide the clouds
—————-
UCCW – battery/sms/call/mail count
• Download from https://www.dropbox.com/s/hsxcsiycw5mwhj1/bat.uzip
• Copy to /sdcard/UltimateCustomClockWidget folder
• I assume you know how to use it and import as file the uzip file… resize to match/aline with text/calls/Mail
(ask me if you do not know how to use UCCW.. search first)
————————-
DESKTOP VISUALIZER
• Basically, the marbles inside will serve as the app icon.. so we need blank PNG.
download at https://www.dropbox.com/s/gzmnntu3ewb5x75/Copy of blank.png
• Always select 1×1 DeskVis widget and just resize it to fit the icons.
just set up the widgets(do not configure yet to avoid confusion) see image: https://www.dropbox.com/s/8exa8nzsqewttre/tutDV.png
• after polotting, then configure each one, icons will be the BLANK PNG and select the app to launch
• select NONE for the touch effect
• Clear label text/name
• Vibration, select on or system/haptic
do that for all of the DV set ups and lastly..
tap and hold on anywhere (not with the widgets) Nova actions, select APP Drawer.
just fit it near the APP marble and for the icon, select blank as well.
Go to nova settings again and lock desktop to avoid moving invisible DV widgets.
I almost forgot, for zooper widget.. just select the default from the list and modify the location/colors if you want too… recommended to select 5×1 above size.
DONE…
thanks and enjoy.. comment for any help.
DONT FORGET TO HIT IT THANKS! or buy me a BEER lol
​

Nice!!! Waiting patiently haha
Sent from no where....

go brotha!!!!! aztig!!!

Great work i must say. I like it a lot. Please do share tutorial!
Sent from my LT26i using xda app-developers app

I see uccw and zooper widget, desktop virtualizer, launcher,empty. png. And what else?
Sent from my LT26i using xda app-developers app

Looks pretty awesome....
sent from my LT26i( Xperia Nexus v2 ) from a world of Nexus!

buzz launcher?

let me guess
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CMIIW wallpaper with desktop viltualizer inside (blank .png)

Hurry up and post it already, what is the point in having this in this section if we can't use it? Placebo springs to mind.
Sent from my LT26i using xda premium

I need this in my life !!
Dude,
This looks SWEEEEEEETTTT !!!!
When can we have it???

FanDroid09 said:
Nice!!! Waiting patiently haha
Sent from no where....
Click to expand...
Click to collapse
chrissoriano said:
go brotha!!!!! aztig!!!
Click to expand...
Click to collapse
Kornezije said:
Great work i must say. I like it a lot. Please do share tutorial!
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Thanks guys.. sorry for the long wait... I also have my work to deal with.. but check out the second post for tutorial

Timely - Elegant but simple clock, great clock widget

I'm here to to mention that this is the best clock I've ever seen on Android. It has many functions like puzzles and math to keep you away from sleeping in. I've used it for a week now and I find it pretty useful.
Although the app is free but it has some premium content, but you don't have to pay for it, just share your referral code to your friends so whenever they install the app and enter the code, they get a free theme and you get 1 share. 20 shares will unlock all of the premium content
MODERATOR EDIT - REFERRAL CODES LIKE THIS ARE NOT ALLOWED FOR ANYTHING via XDA
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
"Description
Timely is the beautiful Alarm Clock for Android, featuring a stunning user experience and revolutionary cloud integration to backup and synchronize your alarms with multiple devices.
Setting an alarm has never been easier: Just swipe from the edge of the screen and set the desired time by dragging a bar. Tap to make adjustments of 5 minutes.
Beautiful wake-up experience: Hand-crafted, high quality sounds and our innovative Smart Rise feature transform waking up in the morning into pure delight.
Your taste, your style: Choose from our gorgeous color themes to match your very own style. Or use our design-tool to create an all-new look. Select one of our hand-crafted designer clocks to fit your taste.
Never get up late again: Use challenges with your alarms to make sure you are really awake when dismissing an alarm. Think pressing buttons is not fancy enough? Turn your phone to snooze it. Additionally, Timely recognizes when you lift your phone and reduces the alarm intensity by lowering the volume.
Connecting your devices: Manage, dismiss and snooze alarms on all your devices at once. Cloud synchronization enables a seamless experience across phones and tablets. As a plus, everything gets backed up.
Ready, Set, Go: Use our stopwatch to measure time with style. And setting a countdown is as easy as winding up a kitchen timer.
Designed for tablets: No matter what kind of device you own, Timely just looks perfect.
More: Widget, Google Now integration, recurring alarms, awesome animations, adaptive snoozing, fade-in, DashClock extension, volume buttons to snooze.
Out of the box, Timely is a free app that shows ads after 5 days. If you choose to go pro (in app purchase), you will get all current and future premium content. "

Updated Post with pic. Great for tablets as well and it syncs across devices.

OK so I dl'ed the app via your link provided. Is there anything more I need to do to credit you?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

noobchef said:
OK so I dl'ed the app via your link provided. Is there anything more I need to do to credit you?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Nope that's all you needed to do! Thank you.
I've unlocked the premium version and I no longer need the shares. If someone else would like to share their link by going into timely, hitting menu then settings, there should be a Share Application which can give you the link to post if you'd like to put it in the thread. :good:
Thanks again to all that helped, I'll continue to maintain the thread and by request I can even swap out my code for one of yours if you would like.

This is a really great clock. I've tried so many and always end back up with the stock clock app. This one finally made me change for good.
Sent from my Nexus 7 using Tapatalk 4

More Widget choices!!
If you bore of the timely widget but love the alarm. I like it but it doesnt have weather. One more clock widget (https://play.google.com/store/apps/details?id=com.sunnykwong.freeomc&hl=en) allows many more options for the widget but lets you still open the timly alarm when you touch the clock. It makes it feel just as baked in as the touchiz accuweather widget/clock.
In the settings of "One more clock widget" this tap and display table allows you to open timely as if its part of the widget.