All you Smarties or there! He's anyone found a way to get Bluetooth, specifically voice command to work with the screen off?
I have a sena MC Bluetooth headset that works flawlessly in GB roms but ics won't respond when the screen is off. The phone works plays music through the headset etc. but it won't respond to the headset buttons.
has anyone found a fix to this?
Sent from my SPH-D710 using XDA
Not yet, we hope this will be fixed in the final release.
Still an issue
I have made sure that, in the the security options, the phone is allowed to accept bluetooth commands while the screen is locked. However, ICS has really messed up the way the phone manages bluetooth stacks. If the screen is off, it's a 1/10 chance it will accept commands from my BT headset. However, if I leave the app in focus, change the song with the headset while the screen is on, turn the screen off, turn the screen back on without unlocking the phone, change the song with the headset, then turn the screen off, it will usually work. BUT, this is a gigantic P.I.T.A. and I don't think my expectations too high that this should just work. I really hope someone hops on this.
indycross said:
I have made sure that, in the the security options, the phone is allowed to accept bluetooth commands while the screen is locked. However, ICS has really messed up the way the phone manages bluetooth stacks. If the screen is off, it's a 1/10 chance it will accept commands from my BT headset. However, if I leave the app in focus, change the song with the headset while the screen is on, turn the screen off, turn the screen back on without unlocking the phone, change the song with the headset, then turn the screen off, it will usually work. BUT, this is a gigantic P.I.T.A. and I don't think my expectations too high that this should just work. I really hope someone hops on this.
Click to expand...
Click to collapse
I can't even do that... I can change the song just fine from my bluetooth headset while the app is in focus or behind, but once I turn the screen off and the phone is locked, it stops responding. Has there been any progress with this issue over the past few months?
Related
I just got stereo bluetooth headphones, and I'd like to be able to turn off the screen and lock all the buttons when playing music.
Is there anything I can do or any programs what will allow me to do this?
I've found deltaLock to be quite useful. Available from http://www.freewareppc.com/utilities/deltalock.shtml
I found this really awesome APP in the market to automatically turn Bluetooth on and off when your on a call. This allow great power savings by having access to your bluetooth speakerphone or headset without having bluetooth enabled all day draining power.
I've tested it out to some great extent over the past few days and I must say that it is pretty awesome and should come as a stock option in the future.
The program is pretty simple with 2 check boxes: Enable while on call and Enabled with Powered.
The first option is the main one and will enable bluetooth once you receive or make a call. This allows you to simple just turn on your headset or auto connect without any user intervention. The program will also automatically turn bluetooth once the call has ended.
The second option could also be a great one if you are a heavy bluetooth headset user that never takes it off. This option turns on bluetooth every time it is on a charge, so at night you can dock the device or plug it in, then continue to wear your headset to take calls when needed. This option can also be replaced by a NFC tag but works well enough without requiring a tag. One example would be in your car. Plug your device up and it can auto connect to your bluetooth device.
Pretty impressed with the app and it will end up making my normal install list. The app is free on the market and well worth a download if you use bluetooth for any headset or speakerphone.
Android Play link:
Bluetooth on Call
Whats the name? or add a link
It's a surprise! J/k.
It was lunch time and I forgot to post the link before rushing out to eat. Updated OP. I didn't make it or endorse it, but it is just a handy little app. When I first installed it, it wasn't shutting down bluetooth properly... so it would turn on and stay on. But after an update it works as it should.
Do you find bluetooth to use a lot of battery power when on idle (not on an active call)? I find it doesn't really impact my battery at all. I do question if an app like this can have a negative effect on the Bluetooth headset you're using, since it's constantly looking to make a connection when there's no connection to be had... Like the battery drain experienced when a phones cell ratio has to poll for new towers when the signal is low or dead.
EP2008 said:
Do you find bluetooth to use a lot of battery power when on idle (not on an active call)? I find it doesn't really impact my battery at all. I do question if an app like this can have a negative effect on the Bluetooth headset you're using, since it's constantly looking to make a connection when there's no connection to be had... Like the battery drain experienced when a phones cell ratio has to poll for new towers when the signal is low or dead.
Click to expand...
Click to collapse
thats a good question....
Not at all. The bluetooth simply turns OFF completely on your phone... it isn't sitting idle or anything. The program simply toggles bluetooth on and off like you would otherwise in settings manually.
For the headset, it shouldn't have any negative affect either. If you have your headset physically turned on, but not connected, it will usually go into a hibernate mode to save power.
But here is my situation and how I use my headset:
I don't wear it all day. I have it in my car door handle. I answer the phone manually like always. I get a lot of calls and most are quick. While I'm driving, if I know the call is going to be long or if I want to be handsfree, I simply turn on my headset and put it on. By that time, my phone's bluetooth is already activated and seeking a connection. The headset doesn't know any difference. Once I'm done, the phone turns off bluetooth and I turn off my headset.
If you were to wear your headset ALL day, and like to answer your calls handsfree... then this might not work because there wouldn't be enough time for your headset to connect before the caller goes to VM.
If your a heavy bluetooth user, then obviously leave BT turned on all day. If you have a headset and like to use it occasionally while on calls, this app is great. With this app, all you have to worry about it turning on your headset and putting it in your ear. Once it connects, the call will be transferred to the headset and you can retire your phone.
I haven't tested how well it works having the ear piece already turned on and ready to go but I would suspect that you would have to manually answer it from the phone. It just depends on how fast your headset and phone connect to each other.
My issue today is that my bluetooth will not pair properly and remember its configurations. My initial pairing on my phone with my car's flexsmart X3 works perfect, however when I turn off my bluetooth on the phone or turn off my car and turn it back on the phone will still see the flexsmart and it will say it is paired but I get no sound. Upon further investigating I find that in the options setting that neither the call nor music tick box is checked. If I try to tick them it will think for a few seconds and then gray out and do nothing again.
I never had a problem with my note 2 or my temp replacement evo 3d remembering these settings. All I would do with those phones was pair it once and then any time I hopped in the car I would just turn onm,y phone's bluetooth and go. Now with my note 4 I have to unpair and repair the devices each and every time which is a huge pain.
I have read a little bit that this is due to samsung note 4 using a newer bluetooth standard than its predecessors. Is there anyway to circumvent this issue by maybe rolling back the bluetooth drivers or something? I even thought about creating a tasker profile to help with this but still I would have to physically press the search button on the flexsmart eachtime.
Any and all suggestions would be great. Also right now I am on rooted stock 5.0.1
PS: I will try and post some photos to help when I get the chance to get to my car.
I've been start for a solution to this since the phone came out as well. I have the same Bluetooth issues with my phone in my car. Nothing more annoying than having to turn Bluetooth on and off for 10-15 minutes of your drive before you can use the damn thing. Oh wait, more annoying would be when it's been working for a solid 45 minutes or so and then suddenly, with no warning, the Bluetooth connection ends for no reason and your cars stereo comes on instead of what you were streaming only the volume on the cars radio is far louder and it scares the ever living crap out of you
flyhighx said:
I've been start for a solution to this since the phone came out as well. I have the same Bluetooth issues with my phone in my car. Nothing more annoying than having to turn Bluetooth on and off for 10-15 minutes of your drive before you can use the damn thing. Oh wait, more annoying would be when it's been working for a solid 45 minutes or so and then suddenly, with no warning, the Bluetooth connection ends for no reason and your cars stereo comes on instead of what you were streaming only the volume on the cars radio is far louder and it scares the ever living crap out of you
Click to expand...
Click to collapse
Odd....I dont seem to have that issue. Once I have initially paired the bluetooth it will stay connected without any interruptions. Also pairing for me is really fast and only takes a minute or so. My problem is that instead of my phone remembering the current device settings that it is paired with, it will forget to associate it with calls and data after I turn the bluetooth off and then later back on even though the phone will still remember it is paired with the car bluetooth.
First world problems I know but it gets a tad annoying having to unpair and repair my phone each and everytime I hop in my car to go somewhere if I want to listen to my music.
In the car I don't get a lot of skipping. But when connected to my BT speakers audio does skip a lot and starts playing in ffw then disconnects completely. It's driving me nuts. I've tried all the usual trouble shooting also. No help. Wtf Samsung/Google
Running a bone stock OP3, non-rooted, no mods, on the Community Build. Since the latest update, my BT audio is weird.
I pair my phone to my motorcycle helmet. Its a Shoei GT Air with a Sena 20S Comm system installed. It's a very nice unit.
So what happens is that when I push the button on the comm to activate Google Now, so that I can speak to my phone and tell it to dial, get directions, play music, etc... No matter what volume level I set my phone to, or the headset, the "beep" and "Ok" that Google Now speaks when you activate it, blows out my eardrums. It is like WAY high volume, 5x as loud as the music or anything else. I have gone through the comm system settings and there is nothing in there to mess with. I also notice that the volume of Google Now only goes that high when the screen of the phone is off. If the screen is on, then the tone is the same level as whatever music is playing, etc...
If I turn the screen off and the music is at a normal listening level and I hit the button to make a call or fast forward to the next some, that damned Google Now tone is back to ear shattering levels...
I am convinced that it isn't the comm system, because a google search shows similar issues with Android phones and BT over the past few years...
Another weird thing, is that when I turn on and pair the comm system and I hit the button to activate Google Now, if I do it 5 or 6 times in a row, it will eventually revert to normal audio levels, the same as the music or navigation... But when I turn off the comm, then the next time I turn it on I have to do it all over again...
Very annoying but I an convinced that it isn't the comm system. It seems to have started last week when the new Open Beta came out and I installed it.
Now, I have unpaired, deleted and repaired the connection, I have wiped cache and stuff, but I can't seem to get this to work right.
Any ideas?
It has to do with how Bluetooth handles its datastream.
Bluetooth has very limited bandwidth, so it has to allocate based on the situation. When streaming music from your phone to the BT device, it can dedicate the entire bandwidth to the unidirectional stream. However, if you need to use the helmet's mic, then BT has to use the same limited bandwidth to stream data in both directions. This is why BT devices have notable audio quality degredation when used to make calls.
When your screen is on, Google Assistant/Now will acutally use your phone's mic to listen for commands rather than your BT's mic, which means that it does not have to change protocols and reduce audio output bandwidth.
To address your issue with Google Assistant/Now's increased volume, try to place a call while your helmet is connected to your phone and reduce the volume while in call with your phone's volume buttons. Hopefully, the volume change will stick when your helmet uses the same two-way protocol when using the voice assistant.
Try:
Developer options -> disable absolute volume
Tried that Developer Option, made no difference. It's clearly something else going on under the hood. Other Android phones have had it over the years when connecting to BT devices... I guess I will have to just live with it.
Even though I understand that I'm part of the P beta. Has anyone else experienced a no reaction to an unlock screen or poor bluetooth hookup.
Unlock- unresponsive from the blank lock screen. In this case I push the power button and then the unlock works
Bluetooth- A longer than usual time to connect plus says it's connected but it's not. Turning BT on and off seems to recycle it
Could this be just part of the Beta items to fix?
Thanks
Only Bluetooth issue I had was back with DP2, connection with a 2016 ILX wasn't exactly fully connected. Media still came out of my phone. I would have to uncheck media in the settings then check it again to get the sound going through the car speakers. That didn't happen with a 2013 Passat and is now fine with DP3.
pbman1953 said:
Even though I understand that I'm part of the P beta. Has anyone else experienced a no reaction to an unlock screen or poor bluetooth hookup. Headphones, sound bar, and portable speakers have been fine. I've also never had any phone response issues with Bluetooth devices connected.
Unlock- unresponsive from the blank lock screen. In this case I push the power button and then the unlock works
Bluetooth- A longer than usual time to connect plus says it's connected but it's not. Turning BT on and off seems to recycle it
Could this be just part of the Beta items to fix?
Thanks
Click to expand...
Click to collapse
Sent from my Pixel 2 XL using Tapatalk