[APP] Auto - Bluetooth on Call - Samsung Galaxy Nexus

I found this really awesome APP in the market to automatically turn Bluetooth on and off when your on a call. This allow great power savings by having access to your bluetooth speakerphone or headset without having bluetooth enabled all day draining power.
I've tested it out to some great extent over the past few days and I must say that it is pretty awesome and should come as a stock option in the future.
The program is pretty simple with 2 check boxes: Enable while on call and Enabled with Powered.
The first option is the main one and will enable bluetooth once you receive or make a call. This allows you to simple just turn on your headset or auto connect without any user intervention. The program will also automatically turn bluetooth once the call has ended.
The second option could also be a great one if you are a heavy bluetooth headset user that never takes it off. This option turns on bluetooth every time it is on a charge, so at night you can dock the device or plug it in, then continue to wear your headset to take calls when needed. This option can also be replaced by a NFC tag but works well enough without requiring a tag. One example would be in your car. Plug your device up and it can auto connect to your bluetooth device.
Pretty impressed with the app and it will end up making my normal install list. The app is free on the market and well worth a download if you use bluetooth for any headset or speakerphone.
Android Play link:
Bluetooth on Call

Whats the name? or add a link

It's a surprise! J/k.
It was lunch time and I forgot to post the link before rushing out to eat. Updated OP. I didn't make it or endorse it, but it is just a handy little app. When I first installed it, it wasn't shutting down bluetooth properly... so it would turn on and stay on. But after an update it works as it should.

Do you find bluetooth to use a lot of battery power when on idle (not on an active call)? I find it doesn't really impact my battery at all. I do question if an app like this can have a negative effect on the Bluetooth headset you're using, since it's constantly looking to make a connection when there's no connection to be had... Like the battery drain experienced when a phones cell ratio has to poll for new towers when the signal is low or dead.

EP2008 said:
Do you find bluetooth to use a lot of battery power when on idle (not on an active call)? I find it doesn't really impact my battery at all. I do question if an app like this can have a negative effect on the Bluetooth headset you're using, since it's constantly looking to make a connection when there's no connection to be had... Like the battery drain experienced when a phones cell ratio has to poll for new towers when the signal is low or dead.
Click to expand...
Click to collapse
thats a good question....

Not at all. The bluetooth simply turns OFF completely on your phone... it isn't sitting idle or anything. The program simply toggles bluetooth on and off like you would otherwise in settings manually.
For the headset, it shouldn't have any negative affect either. If you have your headset physically turned on, but not connected, it will usually go into a hibernate mode to save power.
But here is my situation and how I use my headset:
I don't wear it all day. I have it in my car door handle. I answer the phone manually like always. I get a lot of calls and most are quick. While I'm driving, if I know the call is going to be long or if I want to be handsfree, I simply turn on my headset and put it on. By that time, my phone's bluetooth is already activated and seeking a connection. The headset doesn't know any difference. Once I'm done, the phone turns off bluetooth and I turn off my headset.
If you were to wear your headset ALL day, and like to answer your calls handsfree... then this might not work because there wouldn't be enough time for your headset to connect before the caller goes to VM.
If your a heavy bluetooth user, then obviously leave BT turned on all day. If you have a headset and like to use it occasionally while on calls, this app is great. With this app, all you have to worry about it turning on your headset and putting it in your ear. Once it connects, the call will be transferred to the headset and you can retire your phone.
I haven't tested how well it works having the ear piece already turned on and ready to go but I would suspect that you would have to manually answer it from the phone. It just depends on how fast your headset and phone connect to each other.

Related

Galaxy Nexus Car Setups

Just created this thread to find out what kind of car setups do you guys have with your Galaxy Nexus?
I just created mine using NFC, BT and Tasker to send all music and calls to car stereo when I enter the car, read out sms while driving, turn up backlight during daytime etc and then go back to previous state when I exit.
Details here: My Android NFC BT Car Audio Setup
What have you done to pimp up your car with your beloved GN?
I have a 3.5mm audio in jack for aux, I purchased a XtremeMac InCharge BT for wireless music. No special "read text aloud" apps or anything, I just try not to text in the car.
shantzg001 said:
Just created this thread to find out what kind of car setups do you guys have with your Galaxy Nexus?
I just created mine using NFC, BT and Tasker to send all music and calls to car stereo when I enter the car, read out sms while driving, turn up backlight during daytime etc and then go back to previous state when I exit.
Details here: My Android NFC BT Car Audio Setup
What have you done to pimp up your car with your beloved GN?
Click to expand...
Click to collapse
I have a Parrot MKI9200. I get in the car, it connects and I drive off. No point in turning BT off (very low power in standby) and you can do the other stuff with a BT on-connect event in Tasker. Don't generally bother, TBH. Lazy, me
Daern
Interesting. Right now I just keep Bluetooth on always, and then manually open the Pandora app (for music) when I'm in the car (built-in BT stereo). Leaving the car, it turns off automatically. Eventually I'm going to set up Delayed Lock to turn off lock screen while connected to BT.
daern said:
I have a Parrot MKI9200. I get in the car, it connects and I drive off. No point in turning BT off (very low power in standby) and you can do the other stuff with a BT on-connect event in Tasker. Don't generally bother, TBH. Lazy, me
Daern
Click to expand...
Click to collapse
I wanted to go that route too earlier but I connect to other BT devices as well through the day . Hope Tasker adds rules for specific devices soon.
zAlbee said:
Interesting. Right now I just keep Bluetooth on always, and then manually open the Pandora app (for music) when I'm in the car (built-in BT stereo). Leaving the car, it turns off automatically. Eventually I'm going to set up Delayed Lock to turn off lock screen while connected to BT.
Click to expand...
Click to collapse
Do try out tasker along with secure settings plugin. You will pay just a little bit more but acquire this and lot more functionality.
I'm using a Kinivo BTC8 bluetooth to fm
With the OEM car dock.
NFC key-chain and NFC Task Launcher to change my settings
Works great for music, calls, navigation, etc
shantzg001 said:
I wanted to go that route too earlier but I connect to other BT devices as well through the day . Hope Tasker adds rules for specific devices soon.
Click to expand...
Click to collapse
Doesn't Tasker already do this? When I select a context for "Bluetooth Connected," it opens a dialog where I can choose the name or address of the Bluetooth advice from a list of devices I've paired with. I choose to pair with my Parrot device, and it's always worked for me.
I should admit that I very rarely pair with any other device, so I might not notice whether Tasker is only responding to the fact of the Bluetooth connection, rather than the specific device. But if that's the case, why provide an option for you to select the specific device?
dan in la said:
Doesn't Tasker already do this? When I select a context for "Bluetooth Connected," it opens a dialog where I can choose the name or address of the Bluetooth advice from a list of devices I've paired with. I choose to pair with my Parrot device, and it's always worked for me.
I should admit that I very rarely pair with any other device, so I might not notice whether Tasker is only responding to the fact of the Bluetooth connection, rather than the specific device. But if that's the case, why provide an option for you to select the specific device?
Click to expand...
Click to collapse
Ah thanks for letting me know about this. I had tried this very long back when Tasker had just been released and didn't think of seeing again if it had been changed. Will try this.

Better control of auto Bluetooth connections?

My g3 is completely stock like my last few phones have been.
I am looking for better control of my Bluetooth connections that automatically connect to various objects. All 3 of my connections have call audio capabilities, and I only want to use 1 for call audio. However when I get in the car its a 50/50 gamble of what will connect to my phone as the priority device resulting in me having to go change the settings every time I drive.
Here's the situation:
My car has 3 BT connections I currently use when I drive.
Priority 1: Car OEM Bluetooth connection. No audio streaming available so all I want is automatic connection for hands free through my car speakers and steering wheel controls for phone calls.
Priority 2: Garmin GPS traffic. My GPS uses an app on my phone to get traffic reports. It only needs the BT connection to communicate with my app. The problem is My GPS has hands free call audio also, but i dont use that feature and never want to. However it seems I frequently have to go uncheck the box "use call audio" in phone BT settings because this sometimes connects to my phone before the car BT does.
Priority 3: sometimes when I am not using my iPod for music I use an adapter for streaming music since my car does not offer that feature on its BT connection. Of course this adapter also offers call audio and media streaming. When this is plugged up and listening to music I have to disconnect my cars BT (listed as priority 1) as it will cause static in my music streaming. When I use this device I shut off the connection to my car and just leave the GPS (priority 2) and this connected and make phone calls by hand without hands free since this adapter does not allow me to use my steering wheel controls etc that the car has and its just easier to do it by hand. I don't always use this adapter, only when im board of my iPod and sirius and want to stream Spotify.
I've tried "Bluetooth auto connect" application but it hasn't done anything to help control which device connects and which doesn't or which of them has priority. A lot of the times I'll get in the car and disconnect all of them and start over but usually one of the devices automatically tries to reconnect causing them to interfere with each other while I'm driving. Unfortunately none of these devices have the ability to shut off features in the devices themselves which means I have to use my phone to control them.
Is there any way of controlling my bluetooth connections in more detail or am I just stuck with them battling each other every time I get in the car? Usually I don't have a problem once they are all set but if my phone restarts or I I need to start all over. If the phone would just remember which connection uses "media audio" or "call audio" this all could be avoided but the phone never ever remembers and always resets them all as checked. My Bluetooth is usually always turned on (probably what kills my battery) and I have no other connections besides what I use in the car. I had the same problems on my Xperia Z1 and don't think this is an LG G3 specific thing. I think its an android thing in general.
Thanks for any ideas.
Sent from my LG-D851 using XDA Free mobile app

Bluetooth pairing issues

My issue today is that my bluetooth will not pair properly and remember its configurations. My initial pairing on my phone with my car's flexsmart X3 works perfect, however when I turn off my bluetooth on the phone or turn off my car and turn it back on the phone will still see the flexsmart and it will say it is paired but I get no sound. Upon further investigating I find that in the options setting that neither the call nor music tick box is checked. If I try to tick them it will think for a few seconds and then gray out and do nothing again.
I never had a problem with my note 2 or my temp replacement evo 3d remembering these settings. All I would do with those phones was pair it once and then any time I hopped in the car I would just turn onm,y phone's bluetooth and go. Now with my note 4 I have to unpair and repair the devices each and every time which is a huge pain.
I have read a little bit that this is due to samsung note 4 using a newer bluetooth standard than its predecessors. Is there anyway to circumvent this issue by maybe rolling back the bluetooth drivers or something? I even thought about creating a tasker profile to help with this but still I would have to physically press the search button on the flexsmart eachtime.
Any and all suggestions would be great. Also right now I am on rooted stock 5.0.1
PS: I will try and post some photos to help when I get the chance to get to my car.
I've been start for a solution to this since the phone came out as well. I have the same Bluetooth issues with my phone in my car. Nothing more annoying than having to turn Bluetooth on and off for 10-15 minutes of your drive before you can use the damn thing. Oh wait, more annoying would be when it's been working for a solid 45 minutes or so and then suddenly, with no warning, the Bluetooth connection ends for no reason and your cars stereo comes on instead of what you were streaming only the volume on the cars radio is far louder and it scares the ever living crap out of you
flyhighx said:
I've been start for a solution to this since the phone came out as well. I have the same Bluetooth issues with my phone in my car. Nothing more annoying than having to turn Bluetooth on and off for 10-15 minutes of your drive before you can use the damn thing. Oh wait, more annoying would be when it's been working for a solid 45 minutes or so and then suddenly, with no warning, the Bluetooth connection ends for no reason and your cars stereo comes on instead of what you were streaming only the volume on the cars radio is far louder and it scares the ever living crap out of you
Click to expand...
Click to collapse
Odd....I dont seem to have that issue. Once I have initially paired the bluetooth it will stay connected without any interruptions. Also pairing for me is really fast and only takes a minute or so. My problem is that instead of my phone remembering the current device settings that it is paired with, it will forget to associate it with calls and data after I turn the bluetooth off and then later back on even though the phone will still remember it is paired with the car bluetooth.
First world problems I know but it gets a tad annoying having to unpair and repair my phone each and everytime I hop in my car to go somewhere if I want to listen to my music.
In the car I don't get a lot of skipping. But when connected to my BT speakers audio does skip a lot and starts playing in ffw then disconnects completely. It's driving me nuts. I've tried all the usual trouble shooting also. No help. Wtf Samsung/Google

Shutdown Delay & Bluetooth

When I set my Shutdown Delay When ACC Off to anything but zero, the bluetooth stays on when I turn off my car. I usually connect my bluetooth headphones when getting out of the car, but my iPhone reconnects to the headunit unless I'm really far away. I don't want to lose the convenience of the delayed shut down nor the convenience of auto connecting when I first get in my car. So, I've tried to create a Tasker profile that will turn off bluetooth, but I can't seem to find the right parameters. Any idea how to have bluetooth turn off when the headunit first enters Delayed Shutdown?
FYI: I'm on the latest Malaysk ROM.
I would be interested in a solution to this as well.
I think what you are looking for is a sleep or shutdown intent. I have a vague memory of someone talking about this in the origional very long thread. Might be worth searching throu that for intent or intents.
Any update regarding this issue?

disable phone audio without disconnecting galaxy watch?

I use Note9 with Galaxy Watch. It is constantly connected to BT which has some impact on battery life.
When I attempt to go into BT options of the watch and I untick audio calls, it disconnects the watch completetly
With my previous phone (pixel 2xl) I could do it without loosing connectivity to the watch
Anyone is having idea how to do it with Samsung phones?
That's a good question, but I don't think there's an answer. Since it needs at least one option selected, and "Input Device" doesn't do anything, I think you're stuck having "Call Audio" enabled.
That being said, I can't imagine the battery life would be that different with the watch being able to accept calls vs just handling notifications as far as the phone connection is concerned. Yes, it is lower than when not connected to the watch, but that would be true of any smartwatch I'd think.
I do know the Pixel had some issues where it would always direct call audio to a Gear S3 if the Call Audio option was enabled (even if you tried answering on the phone), but the Samsung phones didn't have that issue.
You're mistaken. As long as BT is turned on and there is a connection, the power consumption is the same regardless of what the signal and protocol is being used for. Disabling calls while keeping a BT connection for data purposes (which is how the phone and watch communicate for all the non-phone features) will make absolutely no difference in power consumption.
USING your watch to have a phone call will consume much more power over BT. Simply having the ability to answer/make a call does not incur any extra power.

Categories

Resources