Hello everyone. It's been over a year since I rooted and flashed custom roms on my phone. So please excuse me for my question. So I rooted and installed Clockwork/TeamRogue with the help of ACS's youtube video. I see a lot of people on FE22, I am on EL29 and I am using The Blu Kuban's ICS rom. Is there is a difference having FE22 vs EL29?
Welcome back to flashing. First, a couple of things: As soon as you flashed the Blu Kuban your kernel was changed to the one that the ROM comes with. EL29 is the stock kernel that came with your phone (and is a Gingerbread kernel). I believe you are now using Calk's FD26 Repack kernel (an ICS kernel). Under 'About Phone' in your System settings it will tell you the kernel version you are using.
Unfortunately, EL29-FE22 are also numbers for modems. So you are probably still using the EL29 modem and the FD26 kernel. The Blu Kuban has an awesome ROM Updater in the System settings and contains all the different kernels and modems that you can use with the ROM. Just be sure to use safe flashing techniques as the E4GT is still very susceptible to being bricked.
And don't forget to follow the Blu Kuban development thread, there is a wealth of information in there.
Is it possible he's running the Blu Kuban GB ROM (hence the reference to EL29 unless he's talking modem) http://forum.xda-developers.com/showthread.php?t=1449023 as opposed to the Blu Kuban ICS ROM? http://forum.xda-developers.com/showthread.php?t=1625535
The main difference between EL29 and FE22 is that one (EL29) is Gingerbread while the other (FE22) is ICS.
Read up big time before making the leap to avoid any nasty bricks.
thank you for your help
strange. I went to the development section and installed the ICS version and used the FD26. I will make sure to readup
justin24 said:
strange. I went to the development section and installed the ICS version and used the FD26. I will make sure to readup
Click to expand...
Click to collapse
Good idea and enjoy, it's a fantastic ROM.
So I decided to try Cyan 9 and followed the instruction including adding EL 26 as it says in the instructions but it still shows EL29. If I decide to go back to Blu Kuban can I just use rom updater and flash the FE22 modem?
som roms come with kernels some without but most roms dont come with modems they leave it up to the flasher to flash modem seperately. blue kuban makes it ez by making it all available within the rom updater options for reduced bricking risk.
Sent from my SPH-D710 using xda premium
bendovermore said:
som roms come with kernels some without but most roms dont come with modems they leave it up to the flasher to flash modem seperately. blue kuban makes it ez by making it all available within the rom updater options for reduced bricking risk.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
All roms come with kernels. They wouldn't boot if they didn't. I think you meant to say custom recovery.
Sent from my SPH-D710 using Tapatalk
Related
Hello everyone. I have a question about all of those new kernels that are popping up rapidly in our community for ICS. I'm a pretty advanced phone user and I've been around the community for awhile so I know what a kernel is and things like that.
But anyways, I've been using EL26 fastboot stock CWM and EL29 stock CWM kernels before that to flash anything from ICS using Mobile Odin. Lately I've seen a ton of new kernels pop up and I'm wondering about their benefits.
Agat63's Repacked Kernels
Team Win Recovery Project Kernels
ReactiveDisorder's Kernels
I believe all of them are repacked with Recovery (I haven't tested them yet so I may be wrong) and they're all TW-based.
Could anyone explain what makes each of their kernels different and the benefits they offer? Do they bypass the emmc lockup or not? Which one is the most safe? I don't see how any of them could be drastically different because they aren't custom kernels since we don't have the ICS source yet.
Well for one thing, Agat's most recent repacks have some mileage on them with regards to being safe for flashing roms and wipes.
Sent from my SPH-D710 using xda premium
TWRP recovery/kernels are also known safe. There is a CM9 and TWiz version. I would stay from RADs repacked kernels.
iniz94 said:
Hello everyone. I have a question about all of those new kernels that are popping up rapidly in our community for ICS. I'm a pretty advanced phone user and I've been around the community for awhile so I know what a kernel is and things like that.
But anyways, I've been using EL26 fastboot stock CWM and EL29 stock CWM kernels before that to flash anything from ICS using Mobile Odin. Lately I've seen a ton of new kernels pop up and I'm wondering about their benefits.
Agat63's Repacked Kernels
Team Win Recovery Project Kernels
ReactiveDisorder's Kernels
I believe all of them are repacked with Recovery (I haven't tested them yet so I may be wrong) and they're all TW-based.
Could anyone explain what makes each of their kernels different and the benefits they offer? Do they bypass the emmc lockup or not? Which one is the most safe? I don't see how any of them could be drastically different because they aren't custom kernels since we don't have the ICS source yet.
Click to expand...
Click to collapse
Agat's and TWRP (for GB, ICS and CM9) both have code in place to basically prevent the edify scripts that were causing the EMMC bricks to even start. They are both safe for flashing.
ReActiveDisorder kernels blocked the wipe data option that was the primary source of the bricking. But it has been discontinued.
There is a safe CWM repacked kernel for CM9 and there is supposedly one on the works for AOKP.
For the most part what you are seeing are just stock kernels packed with a custom recovery. The really awesome kernels will be rolling out right as source hits.
Hi guys I'm new to the epic touch and was wondering if it is safe to flash a Ff11 from an already installed ff11 rom and how or is it necessary to restore to gingerbread before flashing the new ff11 rom. Lastly, what is the most stable ICS ROM with everything working? I tried AOKP and it had messed up video recording and bad wake up lag. Thank You
dandog96 said:
Hi guys I'm new to the epic touch and was wondering if it is safe to flash a Ff11 from an already installed ff11 rom and how or is it necessary to restore to gingerbread before flashing the new ff11 rom. Lastly, what is the most stable ICS ROM with everything working? I tried AOKP and it had messed up video recording and bad wake up lag. Thank You
Click to expand...
Click to collapse
Yes it should be safe but just do yourself a favor and only flash, back, restore, wipe, etc from el26 cwm kernel/recovery. Most stable ICS rom would probably be just a stock leak or maybe calks 1.6 rom. I personally use CM9 and its good.
Thanks I did just that. A question though, why do the rooms have wake up lag... Is there a way to fix this?
Sent from my SPH-D710 using XDA
Personally I wouldn't take the chance with the emmc bug. It takes like2 minutes longer but I ALWAYS flash back to el26. Just not worth chancing a brick.
Sent from my ridiculously long named phone ---
Sprint Samsung Galaxy S II Epic 4G Touch
dandog96 said:
Thanks I did just that. A question though, why do the rooms have wake up lag... Is there a way to fix this?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
All ics roms are still leaks. Some devs have been working on tweaks but no source yet to work from. Soon we hope.
I flash from EL29 there is no difference in flashing from EL26 or EL29. I have been using team venom's roms and they work great and really could be an over the air with absoultly no bugs what so ever. I use my phone fro work all day long 5 days a week and havent had the first minutes trouble.
I have flashed Multiple ROMS, and if your looking for batter life, the any ROM from Mijjz of Team Venum is definitely what you want they are all stabil. I am currently using "Mijjz Blend ICS " No Name" ROM. the Xplod Mini rom runs on a sony based kernel and works well, so if you want a differnt interface its a great choice while still keeping the battery life. Blu Kuban Rom is great if you want a variety of optional tweaks built into the ROM. There is a new Team on here called Team Rejectz they just released a new ROM that looks great, I'll be flashing that this morning, and Give you guys an update on how that turns out. I always flash back to either EL29 or EL26 before flashing a new ICS Rom.
dohchp said:
I flash from EL29 there is no difference in flashing from EL26 or EL29. I have been using team venom's roms and they work great and really could be an over the air with absoultly no bugs what so ever. I use my phone fro work all day long 5 days a week and havent had the first minutes trouble.
Click to expand...
Click to collapse
Same here I have been using cm9 as my daily driver for the passed couple weeks and it is rock solid stable! Love ICS I cant imagine going back to Gingerbread after the ICS experience. Its alot faster, way nicer and just overall smashes gingerbread. Lol Not like IOS5-IOS6 where ya get 1 or 2 new features.. Features that Android have had since froyo..lool!
Hey all,
Finally about to make the jump from GB (on Calk's 3.0) to ICS. I need a Rom that is stable (daily driver status) and wanted to see what thoughts you all had. I've been reading all the threads for weeks and think Phantom's Blazer might be the way to go. I'm also considering just using odin to install the stock (and rooted) stock FF18 as my signal is horrible and not sure why (tried many modems). Anyway all thoughts welcome... CM9, AKOP, re-Calked....
May have to try them all!
Thanks!
eozdalga said:
Hey all,
Finally about to make the jump from GB (on Calk's 3.0) to ICS. I need a Rom that is stable (daily driver status) and wanted to see what thoughts you all had. I've been reading all the threads for weeks and think Phantom's Blazer might be the way to go. I'm also considering just using odin to install the stock (and rooted) stock FF18 as my signal is horrible and not sure why (tried many modems). Anyway all thoughts welcome... CM9, AKOP, re-Calked....
May have to try them all!
Thanks!
Click to expand...
Click to collapse
CM9 all the way. Getting great battery life, its typical for me to go 12 hours right now with moderate use (texting, phone calls,web browsing and flipboard) and still be at 50% battery. This rom is so customizable with the notification shade and tethering it should just come with it CM9 out of the box. I was a little worried with the stability of this rom but I haven't had any issues at all. 4G, Camera and GPS is great too. Its snappy quick responsive. Going from stock to CM9 will feel like its a new phone and until we get LTE for Sprint in Minneapolis I'm sticking with this great phone
blazer 1.5 has been remarkable in smoothness and speed and I installed agat. 4.2 and ff18 modem
If you want to stay on caukulins roms there is a recalked 1.7 out for ICS.
Sent from my SPH-D710 using XDA
Blu Kuban & calk n venum is nice.. Noth great daily drivers smooth and great support from the users/dev
- Sent From My Blu Kuban Themed Tapatalk Like A Boss
Blu Kuban is fantastic and stable as well as Milestone 6 and make sure you update your modem if you make the jump. Using Milestone 6 with fg20 modem and loving my phone
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
seriously
I'm on CM9. It's relatively stable as a daily driver and my battery life's been getting much better. It was horrible for about a week after flashing. CM9 and AOKP are pretty interchangeable, but I think I like AOKP more. Keep in mind, they're still alpha, so bugs will happen, but I don't know why alpha 6 wasn't just made beta1 as planned. From my understanding, the ICS FF18 official source needs to be un-f*cked before CM9 goes official, so I'm holding my breath. Meanwhile, I'm interested in CM10. JB is supposed to be better than ICS in many ways. Going from GB to ICS, you are probably going to be let down unless you choose a rom wisely.
If you love Calk, like everyone does, it really might be worth trying the RE-CALKED 0.1.7. I'm debating flashing it now, but I want to know more people's opinions about it first.
So, rest of this forum, how does RE-CALKED 0.1.7 compare to CM9?
Hey everyone, thanks so much for the replies. This is REALLY helpful. I'm really excited to get started on flashing! I think I'll give CM9 a shot first but may try a few others.
eozdalga said:
Hey everyone, thanks so much for the replies. This is REALLY helpful. I'm really excited to get started on flashing! I think I'll give CM9 a shot first but may try a few others.
Click to expand...
Click to collapse
That's good you're testing around..make sure you make your nAndroids as well, easy to get back to what you like/ease of mind if something gets borked
- Sent From My Blu Kuban Themed Tapatalk Like A Boss
MiguelHogue said:
That's good you're testing around..make sure you make your nAndroids as well, easy to get back to what you like/ease of mind if something gets borked
- Sent From My Blu Kuban Themed Tapatalk Like A Boss
Click to expand...
Click to collapse
Thanks, glad you mentioned this. I was actually wondering, given all the issues with ICS and bricking. In the "how not to brick your phone" thread it states not to restore GB while it ICS. Does this refer to nandroid backup/restore? If so, then I would suppose that you need to first oden back to EL26 or ED 29 then restore, correct?
eozdalga said:
Thanks, glad you mentioned this. I was actually wondering, given all the issues with ICS and bricking. In the "how not to brick your phone" thread it states not to restore GB while it ICS. Does this refer to nandroid backup/restore? If so, then I would suppose that you need to first oden back to EL26 or ED 29 then restore, correct?
Click to expand...
Click to collapse
I was on gb a couple days ago and restored my ics back up.. All I did was flash a Calkuins wipe all script (if you don't have it I can link you one) restored my ics back up & then flashed agats source kernel to get it to boot.( http://forum.xda-developers.com/showthread.php?t=1767421)
You're good as long as you use a wipe all script and agats source kernel (they say you can wipe data in agats new source kernel but I haven't yet.. I just always use the wipe all script just by habit Plus it saves me time to have to manually wipe everything)
- Sent From My Blu Kuban Themed Tapatalk Like A Boss
MiguelHogue said:
I was on gb a couple days ago and restored my ics back up.. All I did was flash a Calkuins wipe all script (if you don't have it I can link you one) restored my ics back up & then flashed agats source kernel to get it to boot.( http://forum.xda-developers.com/showthread.php?t=1767421)
You're good as long as you use a wipe all script and agats source kernel (they say you can wipe data in agats new source kernel but I haven't yet.. I just always use the wipe all script just by habit Plus it saves me time to have to manually wipe everything)
- Sent From My Blu Kuban Themed Tapatalk Like A Boss
Click to expand...
Click to collapse
Just to go on top of that. I have/do wipe data manually in agats recovery. No issues so its available/safe if you want to.
Sent from my SPH-D710 using XDA
I am currently on Calkulin's E4GT.2.ROM.V1.6.
I want to run CM10 alpha2.3: Android 4.1.1.
I noticed on the download instructions that it says 'Assuming you are on a kernel that has a safe recovery.".
I just have a simple question, can I download and flash CM10 on top of my current Calkulin build, or should I download a 'safe' kernel and then flash CM10.
I'm trying to be very careful here.
Any help would be greatly appreciated.
Calkulin stopped developing his ROM before kernel source was released and the emmc bug was patched up, so yes you need to use a safe kernel... el 26+CWM is the safest way to go to jellybean i believe.
As Pyrotoast said, using the EL26 would be the best route to go. If you are using the kernel that came with Calk's ROM, you are likely unsafe. Agat's kernel, which is compatible with Calk's ROM should also be a safe alternative.
Ar318307 said:
I am currently on Calkulin's E4GT.2.ROM.V1.6.
I want to run CM10 alpha2.3: Android 4.1.1.
I noticed on the download instructions that it says 'Assuming you are on a kernel that has a safe recovery.".
I just have a simple question, can I download and flash CM10 on top of my current Calkulin build, or should I download a 'safe' kernel and then flash CM10.
I'm trying to be very careful here.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Sent from my SPH-D710 using Tapatalk 2
Hey all, i've been running through ROMs here going back and fourth trying to find the best one for me. And so far i love a couple of ROMS, but the only ROM where i get data speeds that are good is Snipers Lightweight ROM using EL29 modem and agats fl27 repack kernel. I want to be able to use this Kernel and modem on other ROMS (the blu kuban for instance), but it seems most of ROMs require a certain kernel. Is there anyway around this? so i can use whatever kernel i want on any ROM?
mindstate said:
Hey all, i've been running through ROMs here going back and fourth trying to find the best one for me. And so far i love a couple of ROMS, but the only ROM where i get data speeds that are good is Snipers Lightweight ROM using EL29 modem and agats fl27 repack kernel. I want to be able to use this Kernel and modem on other ROMS (the blu kuban for instance), but it seems most of ROMs require a certain kernel. Is there anyway around this? so i can use whatever kernel i want on any ROM?
Click to expand...
Click to collapse
I don't think so. As you know, a kernel is like the base and the bridge between hardware( CPU,etc...) and apps. So if the rom isn't made for a specific kernel, the phone won't boot up
Yes you should be fine. The aroma installer included in Lightweight even has several different kernels to pick from, as they're all for ICS TouchWiz (like Blue Kuban ROM).
Now, if you're using a repack (like fi27), you won't have all the extra tweaking/over/underclocking options like you would from a custom source-built one. But if all you really care about is data speed then there should be no problem.
Trolling from my Cricket-flashed Galaxy S2 E4GT using Tapatalk 2