So anyone that has flashed EG31 cannot flash anything from EK02 at the moment?
Sent from my SPH-D710 using xda premium
yes. Just wait till the official release/leak.
You will be able to flash once we get an offiicial tar.
Sent From My Evo Killer!!!
I was on EG31 and flashed Caulkins EK02.
Sent from my SPH-D710 using Tapatalk
iamtimmah said:
I was on EG31 and flashed Caulkins EK02.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
You flashed the rom not the modem
any kernals for ek02
i was wondering if there were any kernals for the ek02 with overclock abilities?
niv3d said:
So anyone that has flashed EG31 cannot flash anything from EK02 at the moment?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Kernel or ROM, yes. Modem, no
Sent from my SPH-D710 using xda premium
You cannot flash the ek02 MODEM update. You can flash the kernel and ROM. The easiest way to do that at this point is flash Calk's EK02 rom over in the dev section. This will give you everything except the modem.
Just to be clear, you are not waiting for the OTA. The full OTA has been extracted and posted. You are waiting for the tar, which comes around the time of the OTA usually. The tar is given to the Sprint technicians and one of them usually leaks it here. The OTA modifies files, it doesn't install a new modem or system, it modifies the one you have. if you don't have the files it is attempting to modify, the update fails.
Think of the OTA as a windows update and think of the tar as the windows installation cd.
Sent from my SPH-D710 using Tapatalk
What do you mean by can again???
I meant cwm based kernel I can't remover what I used on the other DC build I had stock
Sent from my SPH-D710 using Tapatalk
Well if you're looking just to get CWM you can flash Steady's latest the FC07 repack.
http://db.tt/QXBYSiX5
If you're wanting to use CWM to flash a ROM then you should probably use his FB21 (rev 2). There are some bugs Steady is working on and he suggests not using the latest ones for ROM flashing.
http://db.tt/OKbVKzjv
Good luck!
I think my thread in
http://forum.xda-developers.com/showthread.php?t=1552407 would be helpful for your situation.
Phone wont let me update prl or profile.......but i tried in blazer 4.1 and in frankens ego ics rom
So it must be phone?
Sent from my SPH-D710 using XDA
ScubaSteev said:
Phone wont let me update prl or profile.......but i tried in blazer 4.1 and in frankens ego ics rom
So it must be phone?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Try on a completely stock rom like one of sfhubs Odin in clicks. Or it could just be sprint for now.
Sent from my SPH-D710 using Tapatalk
slick_rick said:
Try on a completely stock rom like one of sfhubs Odin in clicks. Or it could just be sprint for now.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
I was told to but dont know hiw to use on mobile odin
Never wanted to take the chance of bricking
Sent from my SPH-D710 using XDA
slick_rick said:
Try on a completely stock rom like one of sfhubs Odin in clicks. Or it could just be sprint for now.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Do i just mobile odin the el26/CWM Kernel and then flash shfubs el26 stock rom?
Sent from my SPH-D710 using XDA
No go to his fe22 odin one click thread and use that to go to stock twiz. From there update prl/profile. Then you can go ahead and mobile Odin the el26 cwm kernel and ref lash to whatever rom.
Sent from my SPH-D710 using Tapatalk
slick_rick said:
No go to his fe22 odin one click thread and use that to go to stock twiz. From there update prl/profile. Then you can go ahead and mobile Odin the el26 cwm kernel and ref lash to whatever rom.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
I thought since i have gb rom i have to use the el26?
And ive never used mobile odin to flash anything besides a el26 kernel so i have no clue how to flash a completely stock rom
Sent from my SPH-D710 using XDA
I think system update support was removed from Ego to save battery life.
Sent from my SPH-D710 using xda premium
TeamERA said:
I think system update support was removed from Ego to save battery life.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
It wont update on blazer 4.1 either
Im going to flash dazed ics rom in a bit
Sent from my SPH-D710 using XDA
ScubaSteev said:
It wont update on blazer 4.1 either
Im going to flash dazed ics rom in a bit
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I had that same problem on Frankenstein's last night. No matter what I tried they wouldn't update so I ended up going back to Calk's ROM. And I really liked Frankenstein's ROM and wish I could of stayed on it longer.
---------- Post added at 01:57 AM ---------- Previous post was at 01:49 AM ----------
ScubaSteev said:
I thought since i have gb rom i have to use the el26?
And ive never used mobile odin to flash anything besides a el26 kernel so i have no clue how to flash a completely stock rom
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
You can still flash a GB kernel even though you have a ICS ROM installed. It won't boot the phone completely(it'll freeze on the Samsung Galaxy SII screen on startup). But you can still get into recovery and download modes. That's the benefit right there. You don't need to flash all that though. Which ROM do you want to be on? The part about using Odin to go to FE22 and then go to EL26 has an extra step in it. You really don't need to flash the FE22 before going to EL26.
MeWarning said:
I had that same problem on Frankenstein's last night. No matter what I tried they wouldn't update so I ended up going back to Calk's ROM. And I really liked Frankenstein's ROM and wish I could of stayed on it longer.
---------- Post added at 01:57 AM ---------- Previous post was at 01:49 AM ----------
You can still flash a GB kernel even though you have a ICS ROM installed. It won't boot the phone completely(it'll freeze on the Samsung Galaxy SII screen on startup). But you can still get into recovery and download modes. That's the benefit right there. You don't need to flash all that though. Which ROM do you want to be on? The part about using Odin to go to FE22 and then go to EL26 has an extra step in it. You really don't need to flash the FE22 before going to EL26.
Click to expand...
Click to collapse
Wait what? Lol
Im confused
Doesnt some ics roms have cwm
Sent from my SPH-D710 using XDA
ScubaSteev said:
Wait what? Lol
Im confused
Doesnt some ics roms have cwm
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Ya some of them have CWM or a different custom recovery. What ROM is it that you want to install? What I mean is you don't need to flash to multiple other kernels/ROMs before eventually going to whichever ROM you want.
Go to the dev section and find sfhubs fe22 Odin one click and flash your phone with that. The reason you do this is so you will be on a stock rom where you can update prl and profile. After you do this, using Odin (with only auto reboot checked in top right corner), flash the el26 cwm kernel. Boot into recovery and from here you can flash back to Frankenstein or blazer whatever you want. You will need a computer.
So...
1. Fe22 Odin one click
2. Boot into fe22 stock rom and update prl/profile
3. Odin the el26 cwm kernel
4. Flash whatever new rom you want.
Sent from my SPH-D710 using Tapatalk
slick_rick said:
Go to the dev section and find sfhubs fe22 Odin one click and flash your phone with that. The reason you do this is so you will be on a stock rom where you can update prl and profile. After you do this, using Odin (with only auto reboot checked in top right corner), flash the el26 cwm kernel. Boot into recovery and from here you can flash back to Frankenstein or blazer whatever you want. You will need a computer.
So...
1. Fe22 Odin one click
2. Boot into fe22 stock rom and update prl/profile
3. Odin the el26 cwm kernel
4. Flash whatever new rom you want.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Just the thing....I don't have a computer
Sent from my SPH-D710 using XDA
1. Mobile Odin el26 cwm kernel
2. Flash this rom http://forum.xda-developers.com/showthread.php?p=26478829
3. Boot into rom and update prl/profile
4. Mobile Odin el26 cwm kernel
5. Boot back into recovery and flash rom of choice
Sent from my SPH-D710 using Tapatalk
slick_rick said:
1. Mobile Odin el26 cwm kernel
2. Flash this rom http://forum.xda-developers.com/showthread.php?p=26478829
3. Boot into rom and update prl/profile
4. Mobile Odin el26 cwm kernel
5. Boot back into recovery and flash rom of choice
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
The fe22?
And sweet...easier then I thought,just gotta wait for download.
Thanks slick
Sent from my SPH-D710 using XDA
ScubaSteev said:
The fe22?
And sweet...easier then I thought,just gotta wait for download.
Thanks slick
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Doesn't need to be fe22, but needs to be stock touchwiz or close to so you can update prl/profile and that rom will let you do so. No problem, I'm ways here to help.
Sent from my SPH-D710 using Tapatalk
slick_rick said:
Doesn't need to be fe22, but needs to be stock touchwiz or close to so you can update prl/profile and that rom will let you do so. No problem, I'm ways here to help.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Well can I flash el26 stock rom ?
Sent from my SPH-D710 using XDA
ScubaSteev said:
Well can I flash el26 stock rom ?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Fixed in the new update, sorry. Hey scubaSteve, I remember that "sisters friend" thing
Sent from my SPH-D710 using xda premium
Did you try booting into recovery, wipe cache and dalvik, reboot, then try to update again?
I just rooted my ET4G and I am wanting to install CM9 but i am sort of comfused. Am I still supposed to flash EL26 kernel via odin before I do!? Or do I just straight download and flash ROM + Gapps? With this kernel/recovery... I installed team rouge CWM that the guide shows any help thatnks!
Sent from my SPH-D710 using XDA
Yes odin/mobile odin to el26+cwm. El29 has rogue repack recovery which can brick when flashing to or from ICS. EL26+cwm was the last kernel to have official cwm recovery.
Here's a link to stockcwm-el26.tar.md5: http://db.tt/0QJkleJR
Sent on HyDrA with S Voice using Tapatalk 2
Ok so I install this via odin mobile and then I can just download and flash normally?
Sent from my SPH-D710 using XDA
DroidManIc said:
Ok so I install this via odin mobile and then I can just download and flash normally?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Yes, but when you flash a new rom the kernel is replaced with whatever kernel is included in the rom. So you will have to reflash the el26cwm kernel every time before switching to a new rom. ICS roms won't boot with the kernel, so when switching from ICS to ICS or ICS to GB you will have to hold power+volume up as soon as phone starts to reboot to get into recovery.
Sent on HyDrA with S Voice using Tapatalk 2
I would also suggest having the rom/gapps/kernel you want to flash already downloaded and on your phone before going to el26cwm kernel once your on any ICS ROM.
Sent on HyDrA with S Voice using Tapatalk 2
Cool thanks ill give that a shot.
Sent from my SPH-D710 using XDA
http://forum.xda-developers.com/showthread.php?t=1671356
sfhub one click that solve ur problems
What version of cwm can i install if im on Fk23 jb rom??
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Agat has a repacked kernel with custom recovery/cwm that works. Look for the thread in the dev section and FOLLOW THE INSTALL GUIDE. Oh and read through the whole thread too. I installed from the external sd card via mobile odin and had no issues what so ever
Sent from my SPH-D710 using xda premium
I always play it safe and Odin back to el26
Sent from my SPH-D710 using XDA
euklid said:
What version of cwm can i install if im on Fk23 jb rom??
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
many have said to use this AGAT FI27 Kernel from source which has CWM
http://forum.xda-developers.com/showthread.php?t=1767421
latest is version 0.6.8 . theres a tar and zip file use the tar for Odin. You could mobile odin as well
But you should do what you want to do in recovery and then either Odin or Flash in that recovery STOCK Kernel FK23 for best results.