Sent from my SPH-D710 using Tapatalk
What do you mean by can again???
I meant cwm based kernel I can't remover what I used on the other DC build I had stock
Sent from my SPH-D710 using Tapatalk
Well if you're looking just to get CWM you can flash Steady's latest the FC07 repack.
http://db.tt/QXBYSiX5
If you're wanting to use CWM to flash a ROM then you should probably use his FB21 (rev 2). There are some bugs Steady is working on and he suggests not using the latest ones for ROM flashing.
http://db.tt/OKbVKzjv
Good luck!
I think my thread in
http://forum.xda-developers.com/showthread.php?t=1552407 would be helpful for your situation.
Related
I'm trying to flash custom roms to my phone but for som reason it just goes to the little android icon. I'm on EL29 stock root and attempting to flash EL29 custom blazer rom. Anyone else having this issue?
Sounds like you have a stock recovery. Install a custom recovery via sfhub's sticky in the development forum
http://db.tt/0QJkleJR
Here is a link to the stock el26 with cwm. Use odin/mobile odin to flash.
Sent on Slim-n-Trim 1.9 using Tapatalk 2
I have EL29 stock rooted. So I can go backwards to EL26? Also I have clockworkmod recovery which is what i'm using to flash custom roms.
Sent from my SPH-D710 using XDA
killac93 said:
I have EL29 stock rooted. So I can go backwards to EL26? Also I have clockworkmod recovery which is what i'm using to flash custom roms.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Yes....
Sent from my SPH-D710 using xda premium
Ok. I tried blu kuban and now want to go back to gb. Have Odin plus roms but definitely want to tread carefully.
I am on el29 baseband which I then added rogue recovery and flashed to
Fd10 blu kuban rom
Fd26 kernel - which I am guessing installed with blu.
Now to go back....? Just use Odin and flash back? To el26? To el29? Does it matter?
Sent from my SPH-D710 using Tapatalk 2
Odin the el26 kernel and flash your gb rom of choice after doing a full wipe.
Been reading for a while now. Apparently, the baseband is the modem version. So I'm on el29 and downloaded a few of the newer ones. I am not sure however on flashing the kernel. Same method as modem? Gonna be using Odin for both.
Sent from my SPH-D710 using Tapatalk 2
rigel1326 said:
Been reading for a while now. Apparently, the baseband is the modem version. So I'm on el29 and downloaded a few of the newer ones. I am not sure however on flashing the kernel. Same method as modem? Gonna be using Odin for both.
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Just Odin the el26 cwm kernel, calks format all and then flash a gb rom or do a restore from there.
Sent from my SPH-D710 using Tapatalk
I just rooted my ET4G and I am wanting to install CM9 but i am sort of comfused. Am I still supposed to flash EL26 kernel via odin before I do!? Or do I just straight download and flash ROM + Gapps? With this kernel/recovery... I installed team rouge CWM that the guide shows any help thatnks!
Sent from my SPH-D710 using XDA
Yes odin/mobile odin to el26+cwm. El29 has rogue repack recovery which can brick when flashing to or from ICS. EL26+cwm was the last kernel to have official cwm recovery.
Here's a link to stockcwm-el26.tar.md5: http://db.tt/0QJkleJR
Sent on HyDrA with S Voice using Tapatalk 2
Ok so I install this via odin mobile and then I can just download and flash normally?
Sent from my SPH-D710 using XDA
DroidManIc said:
Ok so I install this via odin mobile and then I can just download and flash normally?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Yes, but when you flash a new rom the kernel is replaced with whatever kernel is included in the rom. So you will have to reflash the el26cwm kernel every time before switching to a new rom. ICS roms won't boot with the kernel, so when switching from ICS to ICS or ICS to GB you will have to hold power+volume up as soon as phone starts to reboot to get into recovery.
Sent on HyDrA with S Voice using Tapatalk 2
I would also suggest having the rom/gapps/kernel you want to flash already downloaded and on your phone before going to el26cwm kernel once your on any ICS ROM.
Sent on HyDrA with S Voice using Tapatalk 2
Cool thanks ill give that a shot.
Sent from my SPH-D710 using XDA
http://forum.xda-developers.com/showthread.php?t=1671356
sfhub one click that solve ur problems
Based on this thread:
http://forum.xda-developers.com/showthread.php?t=1525495
It seems that the main issue was some emmc issue causing bricks when flashing with ICS because we didn't have an official release or the source.
I've seen a few rom developers state that they think this problem has been solved in some later kernels. Now that we have an official ICS release, Is this a safe process now? Are there certain roms or kernels I should be using to get ICS recovery to work safely?
Basically I want to no longer have to flash el29 just to try things like Google Now ports and stuff. I want a fully mobile option to flash multiple roms at my leisure like other phones
Agats kernel/recovery is safe. Sleshepic's kernel/recovery is also safe. I flash ICS to ICS alot thru their recoveries no problem.
Sent from my SPH-D710 using XDA
I am glad someone else asked this because I was just about to do the same. I am on Agat and was about to go from stock rom to AOKP Milestone 6 but wasn't sure if I could flash back to TW based roms without having to go to EL29.
How do I flash their recoveries? I already rooted and have superuser. I just don't have a recovery and I'm confused on the articles I've read. Thanks in advance.
Sent from my SPH-D710 using xda app-developers app
Every kernel is safe as long as you don't factory reset. use calks flash all zip instead of the wipe in recovery. Rujelus22 has a 2x wipe zip that does it twice. They wipe cache, dalvik, and system data in one shot.
What kernel should i be downloading? I have stock ICS rooted.
Sent from my SPH-D710 using xda app-developers app
Flash Agats kernel. The .tar file in odin or mobile odin.
Sent from my SPH-D710 using XDA
Android300ZX said:
What kernel should i be downloading? I have stock ICS rooted.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
This is what I followed. Worked great and super easy.
http://www.youtube.com/watch?v=C9gPljlBfDM&feature=plcp
What version of cwm can i install if im on Fk23 jb rom??
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Agat has a repacked kernel with custom recovery/cwm that works. Look for the thread in the dev section and FOLLOW THE INSTALL GUIDE. Oh and read through the whole thread too. I installed from the external sd card via mobile odin and had no issues what so ever
Sent from my SPH-D710 using xda premium
I always play it safe and Odin back to el26
Sent from my SPH-D710 using XDA
euklid said:
What version of cwm can i install if im on Fk23 jb rom??
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
many have said to use this AGAT FI27 Kernel from source which has CWM
http://forum.xda-developers.com/showthread.php?t=1767421
latest is version 0.6.8 . theres a tar and zip file use the tar for Odin. You could mobile odin as well
But you should do what you want to do in recovery and then either Odin or Flash in that recovery STOCK Kernel FK23 for best results.