Related
Hi everyone
As I said on the subject I have a Samsung Galaxy GIO that doesn't work properly. The phone wasn't booting, so a friend of mine tried to fix him using ODIN (because i don't know how to use it) but he used the Galaxy ACE drivers and the OPS file also so the phone now things that he is an ACE. It says Samsung Galaxy ACE when it boots and the volume UP, the home button, the camera don't work, and a few other stuff don't work also.
So what I came here to ask is if you guys now any other way to get the phone into the Download mode? Or now a way to restore everything without ODIN?
Before I think the combination was Volume DOWN, Home and POWER but know it doesn't work =/
Thank you all
Use a tutorial on how to install ADB , or try downloading terminal from market and type ADB REBOOT DOWNLOAD
Then flash a gio rom using odin
Sent from my GT-S5660 using xda premium
voetbalremco said:
Use a tutorial on how to install ADB , or try downloading terminal from market and type ADB REBOOT DOWNLOAD
Then flash a gio rom using odin
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
And can you tell me where to find the drivers for the GIO? I've been searching for almost 2 days and I've only found the .ops file.
Some ppl told me that the Samfirmware ROM's don't need them, that we just check a box that says one package and select the ROM and the OPS file, is that right?
And thank you
lh1tmaN said:
And can you tell me where to find the drivers for the GIO? I've been searching for almost 2 days and I've only found the .ops file.
Some ppl told me that the Samfirmware ROM's don't need them, that we just check a box that says one package and select the ROM and the OPS file, is that right?
And thank you
Click to expand...
Click to collapse
The ops file are the drivers....
lh1tmaN said:
And can you tell me where to find the drivers for the GIO? I've been searching for almost 2 days and I've only found the .ops file.
Some ppl told me that the Samfirmware ROM's don't need them, that we just check a box that says one package and select the ROM and the OPS file, is that right?
And thank you
Click to expand...
Click to collapse
Your device needs to have usb debugging on, and usb drivers so it can connect.
Sent from my GT-S5660 using xda premium
Look here for the files you need:
http://forum.xda-developers.com/showthread.php?t=1573628
Sent from my GT-S5660 using xda premium
use home button+power button+volume down button
not volume up button
hope it can help you
andylah said:
use home button+power button+volume down button
not volume up button
hope it can help you
Click to expand...
Click to collapse
Read dumbass.
If his buttons are screwed, and they dont work properly when booted, they wont work neither to enter download mode
Sent from my GT-S5660 using xda premium
lh1tmaN said:
Before I think the combination was Volume DOWN, Home and POWER but know it doesn't work =/
Thank you all
Click to expand...
Click to collapse
andylah said:
use home button+power button+volume down button
not volume up button
hope it can help you
Click to expand...
Click to collapse
Smart man.
Sent from my GT-S5660 using xda premium
Well you can't Use ADB because that needs your phone to boot up.
Try this:
Take out battery and wait for a while. Then put it back in.
Now, again, take out battery and wait for a while. Then put it back in.
Now try Download mode
lh1tmaN said:
As I said on the subject I have a Samsung Galaxy GIO that doesn't work properly. The phone wasn't booting, so a friend of mine tried to fix him using ODIN (because i don't know how to use it) but he used the Galaxy ACE drivers and the OPS file also so the phone now things that he is an ACE. It says Samsung Galaxy ACE when it boots and the volume UP, the home button, the camera don't work, and a few other stuff don't work also.
So what I came here to ask is if you guys now any other way to get the phone into the Download mode? Or now a way to restore everything without ODIN?
Before I think the combination was Volume DOWN, Home and POWER but know it doesn't work =/
Thank you all
Click to expand...
Click to collapse
Pull battery, plug usb into computer, hold volume down, then while holding volume down plug usb into phone.
I've done it.
I didn't had access to the Download mode, but i had to the recovery one, so I installed the CM7 from there, then i plug it in to the computer and did as voetbalremco (thank you) told me to. (I got into the Download mode using the ADB and then I tried to install the stock rom that I've downloaded from Samfirmware, this time I used the proper .OPS file and ROM but after ODIN finished the phone wasn't booting all do it was already showing Samsung Galaxy GIO, not ACE and the buttons were are already working so I've installed from recovery another ROM.
Thank you all for the help. Without you guys I wouldn't make it.
can't enter download mode
hello,
I'm new to this forum and i need help to boot my phone Samsung Galaxy GIO S5660. I've tried all above procedures but without success. Can anyone help me to boot up my phone???
thanks in advanced!
kiberas said:
hello,
I'm new to this forum and i need help to boot my phone Samsung Galaxy GIO S5660. I've tried all above procedures but without success. Can anyone help me to boot up my phone???
thanks in advanced!
Click to expand...
Click to collapse
tell us how you bricked your phone/made your phone not boot, otherwise we can't help.
wrong firmware upgrade
hello,
I was tried to do some "science" with my phone, upgrading the firmware with Flash ClockworkMod Recovery following instructions for Huawei U8160 in this post: http://forum.xda-developers.com/showthread.php?t=1259739.
After the image were downloaded, i have chosen to Backup Existing ROM (the old one, firmware 2.2.1), and the phone goes off without coming on again from that moment. I have no idea what might be happened but the phone remains off, like a dead body.
I'll appreciate a lot your help guys.
kiberas said:
hello,
I was tried to do some "science" with my phone, upgrading the firmware with Flash ClockworkMod Recovery following instructions for Huawei U8160 in this post: http://forum.xda-developers.com/showthread.php?t=1259739.
After the image were downloaded, i have chosen to Backup Existing ROM (the old one, firmware 2.2.1), and the phone goes off without coming on again from that moment. I have no idea what might be happened but the phone remains off, like a dead body.
I'll appreciate a lot your help guys.
Click to expand...
Click to collapse
I dont get it. You dont have a gio? Dont post here then. If you do, why the *** would you flash recovery from a completely different phone..
Go to service center and get it repaired, this thread is [solved] and can be closed
Sent from my GT-S5660 using xda premium
Hi All ,
I have a similar problem
but I can't enter Download mode , the phone always starts in recovery console :S
and Odin says : please connect a phone
help plz :S
APCOtech said:
Hi All ,
I have a similar problem
but I can't enter Download mode , the phone always starts in recovery console :S
and Odin says : please connect a phone
help plz :S
Click to expand...
Click to collapse
if you still can get in to recovery, you can just flash a rom?
Thanx for the quick reply
but I am new to android
which is the best rom them ? where can I get it ? :S
Hi guys!
I'm trying to bring back to life a Gio from a friend who somehow killed it trying to flash it.
Now the phone does nothing besides turn on the back light of the screen. I can´t put it in download mode or recovery mode.
Although Windows and Odin found the phone can´t flash it. I'm guessing because I can't get the phone to enter download mode.
Does anyone have a solution for this problem?
Thanks!
I flashed SlimBean i777 and now I have no power tried all the possible combination to get into recovery and download mode. However if I plug it in to my computer I am keep getting an error device is not recognized I have tried different USB cables also tried different computers and also uninstalled and reinstalled kies. Can someone help. Thanks in advance
deziguy420 said:
I flashed SlimBean i777 and now I have no power tried all the possible combination to get into recovery and download mode. However if I plug it in to my computer I am keep getting an error device is not recognized I have tried different USB cables also tried different computers and also uninstalled and reinstalled kies. Can someone help. Thanks in advance
Click to expand...
Click to collapse
why on earth you flash i777 rom? thats for Samsung Galaxy S II. Sir, you're brick..just throw it away or claim insurance...
Damn.. not even close...
Sent from my SGH-T999 using xda app-developers app
x1tyme said:
why on earth you flash i777 rom? thats for Samsung Galaxy S II. Sir, you're brick..just throw it away or claim insurance...
Click to expand...
Click to collapse
Seriously.. we have our own Slim Rom in the development section..
joshnichols189 said:
Seriously.. we have our own Slim Rom in the development section..
Click to expand...
Click to collapse
It is becoming ridiculous how much we have of such threads lately. Wonder what fix they expect from us since they do not even bother searching which device that rom is for...
First try to get into a download mode.
If you couldn't try the following methods that used to work with Vibrant:
1. Pull the battery out
2. Hold both vol up & down
3. Hold Power button
4. Connect your usb to a PC and phone
5. Insert your battery
6. Flash any rom
VibrantThemer said:
First try to get into a download mode.
If you couldn't try the following methods that used to work with Vibrant:
1. Pull the battery out
2. Hold both vol up & down
3. Hold Power button
4. Connect your usb to a PC and phone
5. Insert your battery
6. Flash any rom
Click to expand...
Click to collapse
thanks for your help..this **** is ****ed
VibrantThemer said:
First try to get into a download mode.
If you couldn't try the following methods that used to work with Vibrant:
1. Pull the battery out
2. Hold both vol up & down
3. Hold Power button
4. Connect your usb to a PC and phone
5. Insert your battery
6. Flash any rom
Click to expand...
Click to collapse
I dont think this goona work after u flash different phone ROM. Justv my 2 cents. Correct me if I m wrong.
Sent from my SGH-T999 using xda premium
bikrame said:
I dont think this goona work after u flash different phone ROM. Justv my 2 cents. Correct me if I m wrong.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Doesn't hurt to at least try.
Sent from my SGH-T999 using xda premium
lazarat said:
It is becoming ridiculous how much we have of such threads lately. Wonder what fix they expect from us since they do not even bother searching which device that rom is for...
Click to expand...
Click to collapse
I understand people bricking from international flashes. But this was s2.... and it wasn't even our carrier lol
Sent from my SGH-T999 using xda app-developers app
---------- Post added at 07:43 PM ---------- Previous post was at 07:41 PM ----------
Easiest test... does it vibrate? If it doesn't then you have to jtag it
Sent from my SGH-T999 using xda app-developers app
I'm sorry op but I just can't understand why would you even try to flash that!
Sent from my SGH-T999 using xda app-developers app
I know that the good-majority of you lack sympathy, but damn, I feel bad for OP. It's really a tough break when things like this happen.
Hope all ends well, you probably will have to JTAG.
Sent from my SGH-T999 using xda app-developers app
I sent it to mobiletechvideo, they repair hard brick and it costs $60 a lot cheaper then buying a new phone. This wasn't the first time I ever flashed a ROM but the stupid mistake was not doing a research. I assumed that ROM is for AT&t version. I have read in this forums that as long as you don't flash At&t modem you should be fine but I know I grabbed the wrong ROM (At&t Galaxy S II). Well you learn from your mistake I finally experienced how it feels to have hard bricked phone....lol
Galaxy S2 not working after flashing rom
I was trying to Flash rom in Galaxy S2 via Odin...
But by mistake I pressed start button in Odin without inserting PDA path...... Only PIT file I have added.....and forget to add PDA
Now it is not starting any more.....not even in Recovery mode( Volume up + Home + Power button) ....
I think I lost everything........in phone.......
If anybody having some solution ...please let be needful
masu0069 said:
I was trying to Flash rom in Galaxy S2 via Odin...
But by mistake I pressed start button in Odin without inserting PDA path...... Only PIT file I have added.....and forget to add PDA
Now it is not starting any more.....not even in Recovery mode( Volume up + Home + Power button) ....
I think I lost everything........in phone.......
If anybody having some solution ...please let be needful
Click to expand...
Click to collapse
This is the T-Mobile S3 variant forums, try asking in your device's forum
i unpluged the device before dhe odin finished his job ( by mistakeee ) and now it doesnt turn on , charge , go to recovery/odin , hold down power button for 30-60-120 sec nth hapend, it has baterri 90-100 % . plss guys help me :'( i have an samsung galaxy s advance .
I installed recovery.tar.md5 in my sm-g507f/dd and now I have no power tried all the possible combination to get into recovery and download mode. However if I plug it in to my computer I am keep getting an error device is not recognized I have tried different USB cables also tried different computers and also uninstalled and reinstalled kies. Can someone help.
pratham vats said:
I installed recovery.tar.md5 in my sm-g507f/dd and now I have no power tried all the possible combination to get into recovery and download mode. However if I plug it in to my computer I am keep getting an error device is not recognized I have tried different USB cables also tried different computers and also uninstalled and reinstalled kies. Can someone help.
Click to expand...
Click to collapse
Wrong forum, this is the T-Mobile Galaxy S3 forum
android one
i flashed stock rom in my spice android one... after flashing it got struck on spice logo... ithought it was a flashing error ad tried again this time(format + download) now it is completely stopped even the spice logo is also not comming... i tried to flash many a times but no response... but my phone is still detected by sp flash tool.. what could be the reason
Hiii please give me solution for Lava iris 60
Problem after flashing custom ROM phone not to be start
? By mistake install AIS lava iris 60 costom Rom file and after not to be start phone .... Totally are ded ... Please give me solution
Download Odin_Multi_Downloader_v4.42 from HERE
Download GIO_v1.0,ops from HERE
Download samsung galaxy gio s5660m Firmware from HERE
Samsung_usb_driver HERE Thanks for Peteragent5 for this software
1. Turn off your phone
2. Go to download mode by holding Home+Volume Down+Power Button
3. if the pink appears press the Volume up button
4. open Odin_Multi_Downloader_v4.42
5. click ops and choose the Gio_v1.0.ops
6. click the one package and make sure that the auto reboot and protect ops
7. click one package button at the lower right side
8. connect your phone to the computer using usb cable
9. wait until the odin detects your gio just look into the message at the lower left side and the com port mapping is turn to yellow
10. then click start button and wait until your gio will reboot, it can takes from 5-10 minutes
11.after flashing go to recovery mode and wipe data/ factory reset
12 REBOOT and enjoy!
I HOPE ITS helped
Nice guide for newbies:thumbup:.
Do install mobile drivers also b4 proceeding
Sent Via XDA™ Premium
Galaxy_Rohit said:
Nice guide for newbies:thumbup:.
Do install mobile drivers also b4 proceeding
Sent Via XDA™ Premium
Click to expand...
Click to collapse
thanks for reminding me dude.., ok i will edit
Can someone tell me if i should see some kind of action when using Odin apart from the clock?
I'm already almost 1 hour waiting to finish and nothing happens.
I know the phone is connected, I know clock is running but nothing else.
On my phone i only get this:
"Emergency Dload Mode
(ARM9 mode)
SAMSUNG"
I get this after i've been waiting for 20 minutes and unplug it from the phone. After i get an image with a phone and a computer with a yellow sign on the midle, and then when i press the keys to get in to download mode i get this "Emergency message".
Please someone tell me if i should keep waiting or if this is wasted time...
Thanks
rvrosa said:
Can someone tell me if i should see some kind of action when using Odin apart from the clock?
I'm already almost 1 hour waiting to finish and nothing happens.
I know the phone is connected, I know clock is running but nothing else.
On my phone i only get this:
"Emergency Dload Mode
(ARM9 mode)
SAMSUNG"
I get this after i've been waiting for 20 minutes and unplug it from the phone. After i get an image with a phone and a computer with a yellow sign on the midle, and then when i press the keys to get in to download mode i get this "Emergency message".
Please someone tell me if i should keep waiting or if this is wasted time...
Thanks
Click to expand...
Click to collapse
are you sure that did you used the right firmware for your gio?
badagila said:
are you sure that did you used the right firmware for your gio?
Click to expand...
Click to collapse
I'm almost sure.
How can i be sure?
rvrosa said:
I'm almost sure.
How can i be sure?
Click to expand...
Click to collapse
there is four kind of gio: S5660m, S5660v, S5660L and S5660
which one is yours?
badagila said:
there is four kind of gio: S5660m, S5660v, S5660L and S5660
which one is yours?
Click to expand...
Click to collapse
GT-S5660
Check again... It's Home+Volume Down+Power Pressing vol. up(by mistake) takes u to ramdump mode...if I'm not wrong.
Sent Via XDA™ Premium
Galaxy_Rohit said:
Check again... It's Home+Volume Down+Power Pressing vol. up(by mistake) takes u to ramdump mode...if I'm not wrong.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
maybe your right dude
but make sure that you gonna flash the right firmware for your gio dude or else? i don't know what will happen next
USB Problem
My gio i can´t flash via odin... the computer don´t reconize it. It says USB not Reconized.
desluca said:
My gio i can´t flash via odin... the computer don´t reconize it. It says USB not Reconized.
Click to expand...
Click to collapse
have you already installed the usb driver?
Yes i alredy instaled the Samsung kies and the msg its the same...
desluca said:
Yes i alredy instaled the Samsung kies and the msg its the same...
Click to expand...
Click to collapse
no not only kies also the driver. the USB DRIVER see the lik at the first post
Ok i will try to download the usb drivers for Gio.
Ok dude btw what kind of gio di you have?
sent from any where out there!
how to flass and instaal custom rom to galaxy gio olleh
badagila said:
Download Odin_Multi_Downloader_v4.42 from HERE
Download GIO_v1.0,ops from HERE
Download samsung galaxy gio s5660m Firmware from HERE
Samsung_usb_driver HERE Thanks for Peteragent5 for this software
1. Turn off your phone
2. Go to download mode by holding Home+Volume Down+Power Button
3. if the pink appears press the Volume up button
4. open Odin_Multi_Downloader_v4.42
5. click ops and choose the Gio_v1.0.ops
6. click the one package and make sure that the auto reboot and protect ops
7. click one package button at the lower right side
8. connect your phone to the computer using usb cable
9. wait until the odin detects your gio just look into the message at the lower left side and the com port mapping is turn to yellow
10. then click start button and wait until your gio will reboot, it can takes from 5-10 minutes
11.after flashing go to recovery mode and wipe data/ factory reset
12 REBOOT and enjoy!
I HOPE ITS helped
Click to expand...
Click to collapse
can i use this instrutction for my samsung galaxy gio olleh(korian version shw m290k.ed15.1936.kt)
Yes you can but you need to dl the firmware for your own region aand do not use the firmware from the link above
sent from my head
press thanks button if it helps
how to flass and instaal custom rom to galaxy gio olleh
badagila said:
Yes you can but you need to dl the firmware for your own region aand do not use the firmware from the link above
sent from my head
press thanks button if it helps
Click to expand...
Click to collapse
please can you tell how i do that.can you give me the correct firmware's link?pls pls
Hey!
Couple hours ago I tried to update my android version to 4.4 but when I tried to switch it on then couple times it showed error (I can't remember what kind of error it is) and then after that it wont boot anymore. It only shows Samsung Galaxy Y logo and nothing else.
What sould I do??
Please help me!! I don't want to throw that phone away!!!
flash stock rom using odin.
well since there is no android 4.4 for galaxy y gt-s5360 or duos you have
either flashed a rom for a different phone
flashed a rom claiming to be 4.4 but is only 2.3.6
posted in the wrong forum
and questions go ironically in the questions and answers section not in the general section
flash stock rom via odin for your phone
I tried to use the odin but it didn't even identify the phone!
marcussmith2626 said:
well since there is no android 4.4 for galaxy y gt-s5360 or duos you have
either flashed a rom for a different phone
flashed a rom claiming to be 4.4 but is only 2.3.6
posted in the wrong forum
and questions go ironically in the questions and answers section not in the general section
flash stock rom via odin for your phone
Click to expand...
Click to collapse
jaansild said:
I tried to use the odin but it didn't even identify the phone!
Click to expand...
Click to collapse
you havent installed the samsung usb drivers then
then put phone into download mode by pressing vol down home button power button
then connect usb cable
then press vol up to connect
open odin
it will say com then a number iin a coloured box on the left under id:com if connected
jaansild said:
I tried to use the odin but it didn't even identify the phone!
Click to expand...
Click to collapse
You need Samsung USB drivers. Google them, install, reboot PC and Odin will detect the phone.
Sent from my GT-S5360 Gadget of Mass Destruction by xda-app
using CWM........Busybox commands........ No I use my hands
guys please help... i was recently changing from PAC rom Beta 1 (android 4.4.3) to Spinhx? 4.4 ROM because PAC has a long lasting bootip so i was like im gonna go to stock starting to hate aosp... so i downloaded all files which was cwm 6. something (was the latest) then the 2gb rom itself so when it finished i bootedinto cwm and i flashed the cwm zip which ive done before in the past so i hit reboot recovery..... thats where it all began... the forever LG boot logo... so i jumped on xda and searched hard i found 1 but i get stuck because im so unclear on things... i adjust my date n year to june 20th but i can never get the lg flash tool 1.5 or 1.8 to work it still says i need ID and Password... i really need to fix my phone please... i re-read everything but i cannot seem to do anything.. i can get my phone into download mode.. i installed drivers... i cannot see m phone in device manager ? idk what im doing =[ please help... i downloaded all files and everything... i disconnected WiFi and everything.. guys please help me please.... what am i doing wrong???????
Do you have a windows 7 PC? if you do, then you should not have any problem.. Phone will show up under com ports in device manager bit the com ports are hidden by default.. Further, you don't need to reset dates for lg flash tool, just search for megalock.dll file , google it...also google how to enable com ports in windows 7... You should be good to go
Sent from my LG-E980 using Tapatalk
vivebatu said:
Do you have a windows 7 PC? if you do, then you should not have any problem.. Phone will show up under com ports in device manager bit the com ports are hidden by default.. Further, you don't need to reset dates for lg flash tool, just search for megalock.dll file , google it...also google how to enable com ports in windows 7... You should be good to go
Sent from my LG-E980 using Tapatalk
Click to expand...
Click to collapse
it says " Extract the DLL and the TOT files from above and put them in a nice tidy directory" how do i extract DLL??? i just really need my phone fixed =[
vivebatu said:
Do you have a windows 7 PC? if you do, then you should not have any problem.. Phone will show up under com ports in device manager bit the com ports are hidden by default.. Further, you don't need to reset dates for lg flash tool, just search for megalock.dll file , google it...also google how to enable com ports in windows 7... You should be good to go
Sent from my LG-E980 using Tapatalk
Click to expand...
Click to collapse
what do i do with the megalock i have it
2 chainz said:
guys please help... i was recently changing from PAC rom Beta 1 (android 4.4.3) to Spinhx? 4.4 ROM because PAC has a long lasting bootip so i was like im gonna go to stock starting to hate aosp... so i downloaded all files which was cwm 6. something (was the latest) then the 2gb rom itself so when it finished i bootedinto cwm and i flashed the cwm zip which ive done before in the past so i hit reboot recovery..... thats where it all began... the forever LG boot logo... so i jumped on xda and searched hard i found 1 but i get stuck because im so unclear on things... i adjust my date n year to june 20th but i can never get the lg flash tool 1.5 or 1.8 to work it still says i need ID and Password... i really need to fix my phone please... i re-read everything but i cannot seem to do anything.. i can get my phone into download mode.. i installed drivers... i cannot see m phone in device manager ? idk what im doing =[ please help... i downloaded all files and everything... i disconnected WiFi and everything.. guys please help me please.... what am i doing wrong???????
Click to expand...
Click to collapse
You can check the attachment that I uploaded or Just follow the post by hyelton it help me return my brick G Pro to stock for me.
http://forum.xda-developers.com/showpost.php?p=44983841&postcount=1&nocache=1&z=3867799707426630
keno7777 said:
You can check the attachment that I uploaded or Just follow the post by hyelton it help me return my brick G Pro to stock for me.
http://forum.xda-developers.com/showpost.php?p=44983841&postcount=1&nocache=1&z=3867799707426630
Click to expand...
Click to collapse
how do i get my phone to show up in device manager ? thats my only problem i cannot see it =/
this is what i get
2 chainz said:
this is what i get
Click to expand...
Click to collapse
First of all, for that procedure and for the pc to work you need to get your phone on download mode (hold vol down button and connect phone to pc via usb cable). Are you still in bootloop? can you get to recovery?
luisoman2000 said:
First of all, for that procedure and for the pc to work you need to get your phone on download mode (hold vol down button and connect phone to pc via usb cable). Are you still in bootloop? can you get to recovery?
Click to expand...
Click to collapse
i just get stuck at LG screen... however i can get into download mode.. when i hook it up to my computer nothing happens and i still cannot find in device manager.. maybe im being stupid i mean can som1 skype call me n step by step on screenshare? or something please... we can all relate to not having to come out the pockets and get a new phone
Did you install the drivers in the post? You might want to reboot the pc after install. What windows are you using?
Sent from my LG-E980 using Tapatalk
luisoman2000 said:
Did you install the drivers in the post? You might want to reboot the pc after install. What windows are you using?
Sent from my LG-E980 using Tapatalk
Click to expand...
Click to collapse
windows 7 and yes i instal;led drivers ill show u my device manager list
2 chainz said:
windows 7 and yes i instal;led drivers ill show u my device manager list
Click to expand...
Click to collapse
just Google 'enable com ports in windows 7 device manager' and follow the instructions
Sent from my LG-E980 using Tapatalk
Try this.
In the part of the instructions where you disconnect the phone for 5 seconds, try disconnecting the phone, pulling the battery, and re initiate download mode (by holding volume up and volume down while plugging the USB cable into the phone). My green bar started moving immediately when the plug inserted into the phone. I've been trying to get this to work for the past 3 days. I hope it helps.