Hi everyone
As I said on the subject I have a Samsung Galaxy GIO that doesn't work properly. The phone wasn't booting, so a friend of mine tried to fix him using ODIN (because i don't know how to use it) but he used the Galaxy ACE drivers and the OPS file also so the phone now things that he is an ACE. It says Samsung Galaxy ACE when it boots and the volume UP, the home button, the camera don't work, and a few other stuff don't work also.
So what I came here to ask is if you guys now any other way to get the phone into the Download mode? Or now a way to restore everything without ODIN?
Before I think the combination was Volume DOWN, Home and POWER but know it doesn't work =/
Thank you all
Use a tutorial on how to install ADB , or try downloading terminal from market and type ADB REBOOT DOWNLOAD
Then flash a gio rom using odin
Sent from my GT-S5660 using xda premium
voetbalremco said:
Use a tutorial on how to install ADB , or try downloading terminal from market and type ADB REBOOT DOWNLOAD
Then flash a gio rom using odin
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
And can you tell me where to find the drivers for the GIO? I've been searching for almost 2 days and I've only found the .ops file.
Some ppl told me that the Samfirmware ROM's don't need them, that we just check a box that says one package and select the ROM and the OPS file, is that right?
And thank you
lh1tmaN said:
And can you tell me where to find the drivers for the GIO? I've been searching for almost 2 days and I've only found the .ops file.
Some ppl told me that the Samfirmware ROM's don't need them, that we just check a box that says one package and select the ROM and the OPS file, is that right?
And thank you
Click to expand...
Click to collapse
The ops file are the drivers....
lh1tmaN said:
And can you tell me where to find the drivers for the GIO? I've been searching for almost 2 days and I've only found the .ops file.
Some ppl told me that the Samfirmware ROM's don't need them, that we just check a box that says one package and select the ROM and the OPS file, is that right?
And thank you
Click to expand...
Click to collapse
Your device needs to have usb debugging on, and usb drivers so it can connect.
Sent from my GT-S5660 using xda premium
Look here for the files you need:
http://forum.xda-developers.com/showthread.php?t=1573628
Sent from my GT-S5660 using xda premium
use home button+power button+volume down button
not volume up button
hope it can help you
andylah said:
use home button+power button+volume down button
not volume up button
hope it can help you
Click to expand...
Click to collapse
Read dumbass.
If his buttons are screwed, and they dont work properly when booted, they wont work neither to enter download mode
Sent from my GT-S5660 using xda premium
lh1tmaN said:
Before I think the combination was Volume DOWN, Home and POWER but know it doesn't work =/
Thank you all
Click to expand...
Click to collapse
andylah said:
use home button+power button+volume down button
not volume up button
hope it can help you
Click to expand...
Click to collapse
Smart man.
Sent from my GT-S5660 using xda premium
Well you can't Use ADB because that needs your phone to boot up.
Try this:
Take out battery and wait for a while. Then put it back in.
Now, again, take out battery and wait for a while. Then put it back in.
Now try Download mode
lh1tmaN said:
As I said on the subject I have a Samsung Galaxy GIO that doesn't work properly. The phone wasn't booting, so a friend of mine tried to fix him using ODIN (because i don't know how to use it) but he used the Galaxy ACE drivers and the OPS file also so the phone now things that he is an ACE. It says Samsung Galaxy ACE when it boots and the volume UP, the home button, the camera don't work, and a few other stuff don't work also.
So what I came here to ask is if you guys now any other way to get the phone into the Download mode? Or now a way to restore everything without ODIN?
Before I think the combination was Volume DOWN, Home and POWER but know it doesn't work =/
Thank you all
Click to expand...
Click to collapse
Pull battery, plug usb into computer, hold volume down, then while holding volume down plug usb into phone.
I've done it.
I didn't had access to the Download mode, but i had to the recovery one, so I installed the CM7 from there, then i plug it in to the computer and did as voetbalremco (thank you) told me to. (I got into the Download mode using the ADB and then I tried to install the stock rom that I've downloaded from Samfirmware, this time I used the proper .OPS file and ROM but after ODIN finished the phone wasn't booting all do it was already showing Samsung Galaxy GIO, not ACE and the buttons were are already working so I've installed from recovery another ROM.
Thank you all for the help. Without you guys I wouldn't make it.
can't enter download mode
hello,
I'm new to this forum and i need help to boot my phone Samsung Galaxy GIO S5660. I've tried all above procedures but without success. Can anyone help me to boot up my phone???
thanks in advanced!
kiberas said:
hello,
I'm new to this forum and i need help to boot my phone Samsung Galaxy GIO S5660. I've tried all above procedures but without success. Can anyone help me to boot up my phone???
thanks in advanced!
Click to expand...
Click to collapse
tell us how you bricked your phone/made your phone not boot, otherwise we can't help.
wrong firmware upgrade
hello,
I was tried to do some "science" with my phone, upgrading the firmware with Flash ClockworkMod Recovery following instructions for Huawei U8160 in this post: http://forum.xda-developers.com/showthread.php?t=1259739.
After the image were downloaded, i have chosen to Backup Existing ROM (the old one, firmware 2.2.1), and the phone goes off without coming on again from that moment. I have no idea what might be happened but the phone remains off, like a dead body.
I'll appreciate a lot your help guys.
kiberas said:
hello,
I was tried to do some "science" with my phone, upgrading the firmware with Flash ClockworkMod Recovery following instructions for Huawei U8160 in this post: http://forum.xda-developers.com/showthread.php?t=1259739.
After the image were downloaded, i have chosen to Backup Existing ROM (the old one, firmware 2.2.1), and the phone goes off without coming on again from that moment. I have no idea what might be happened but the phone remains off, like a dead body.
I'll appreciate a lot your help guys.
Click to expand...
Click to collapse
I dont get it. You dont have a gio? Dont post here then. If you do, why the *** would you flash recovery from a completely different phone..
Go to service center and get it repaired, this thread is [solved] and can be closed
Sent from my GT-S5660 using xda premium
Hi All ,
I have a similar problem
but I can't enter Download mode , the phone always starts in recovery console :S
and Odin says : please connect a phone
help plz :S
APCOtech said:
Hi All ,
I have a similar problem
but I can't enter Download mode , the phone always starts in recovery console :S
and Odin says : please connect a phone
help plz :S
Click to expand...
Click to collapse
if you still can get in to recovery, you can just flash a rom?
Thanx for the quick reply
but I am new to android
which is the best rom them ? where can I get it ? :S
Hi guys!
I'm trying to bring back to life a Gio from a friend who somehow killed it trying to flash it.
Now the phone does nothing besides turn on the back light of the screen. I can´t put it in download mode or recovery mode.
Although Windows and Odin found the phone can´t flash it. I'm guessing because I can't get the phone to enter download mode.
Does anyone have a solution for this problem?
Thanks!
Related
hi everyone I'm Italian so sorry in case of bad english.
so this is the story, I have buy a galaxy gio (2nd hand) and it comes to me with a galaxy ace rom in fact in the device info the model is S5830. another and bigger problem is that some button are invert,in fact the home button do not have any effect while the effect of the home button is now the function of the vol-up button and the function of vol-up is now non existent. this cause the fact that is impossible to place the phone in download mode to flash with odin.I have flash the cyanogen 7 via recovery in order to bypass odin but the bad surprise is that the problem of the button remained unsolved after the reboot.the only mode that I be able to place the phone is "emergency dload mode arm9 mode" but odin stop in "setup connection" if I try to flash in this mode.my question is: there is something like bios in pc that command the phone that I can flash or replace with the correct one? thanks everyone in advance
go to the installed rom
and download an app that can change your keys
Sent from my GT-S5830 using xda premium
Buy an usb jig on ebay for less then 5 dollar, it will go into an alternative factory download mode, then flash an gio rom...
Think this is the only option since ur device cant get in normal download mode
Sent from my GT-S5660 using xda premium
Did all your keys work in recovery mode? Also, did you use standard recovery or Clockwork mod recovery?
f.83 said:
hi everyone I'm Italian so sorry in case of bad english.
so this is the story, I have buy a galaxy gio (2nd hand) and it comes to me with a galaxy ace rom in fact in the device info the model is S5830. another and bigger problem is that some button are invert,in fact the home button do not have any effect while the effect of the home button is now the function of the vol-up button and the function of vol-up is now non existent. this cause the fact that is impossible to place the phone in download mode to flash with odin.I have flash the cyanogen 7 via recovery in order to bypass odin but the bad surprise is that the problem of the button remained unsolved after the reboot.the only mode that I be able to place the phone is "emergency dload mode arm9 mode" but odin stop in "setup connection" if I try to flash in this mode.my question is: there is something like bios in pc that command the phone that I can flash or replace with the correct one? thanks everyone in advance
Click to expand...
Click to collapse
i dont know if this will work but maybe an usb jig wil work ?
its posted before
and the people there said it worked
maybe this would help with restoring stock rom with odin
Sent from my GT-S5830 using xda premium
Please accept my sincerest apologies. I misunderstood your post.
I think there was mean to be a "c" in your post.
go to the installed rom
and download an app that can change your keys
Click to expand...
Click to collapse
.
I wrongfully assumed you were telling the OP to "hang" his keys.
This was purely an error on my part, and for that I completely apologise.
ive moddiefied my post
Sent from my GT-S5830 using xda premium
Youre also human.
I whas already composing a message to you about it, he trued to help.
Lets keep on topic,
If you search the galaxy gio general topics you'll see a post about usb jigs, you should read them and consifer buying one, it problably is the only sollution to your problem
Sent from my GT-S5660 using xda premium
Sent from my GT-S5660 using xda premium
Install the Android SDK and use the "adb reboot download" command.
With a bit of luck, you should get access to the normal download mode without a USB jig.
Darkshado said:
Install the Android SDK and use the "adb reboot download" command.
With a bit of luck, you should get access to the normal download mode without a USB jig.
Click to expand...
Click to collapse
ive found Program on x10 threads wath is called adb mask ontroller
it is just adb but just simple
and has an great design and easy to use
its good if you dont know the adb commands
like me
Sent from my GT-S5830 using xda premium
Hi, I've read your reply,one-one I will try these methods. but while reading I have thinked one thing, why if I have installed cyanogen via sd zip now the button are still inverted? after all now I have another rom nevertheless the button remained in the earlier state.
About the question of markoghc in recovery mode I can go down in menu with vol-down but I can't go up with vol-up because the vol-up button has the function of "ok", again the home/ok button don't have any function and the power button coincide with "back function". the recovery is CWM-based Recovery v5.0.2.6.
I arrive to emergency dload mode by pressing toether volup-voldown-home-power. Also I suceed to put phone in ramdump mode.I have tried all possible combinations but I do not suceed to arrive to normal download mode. Another question is only cyanogen exist via sd zip or also stock rom exist to install via sd zip? do you know? thanks everyone
f.83 said:
Hi, I've read your reply,one-one I will try these methods. but while reading I have thinked one thing, why if I have installed cyanogen via sd zip now the button are still inverted? after all now I have another rom nevertheless the button remained in the earlier state.
About the question of markoghc in recovery mode I can go down in menu with vol-down but I can't go up with vol-up because the vol-up button has the function of "ok", again the home/ok button don't have any function and the power button coincide with "back function". the recovery is CWM-based Recovery v5.0.2.6.
I arrive to emergency dload mode by pressing toether volup-voldown-home-power. Also I suceed to put phone in ramdump mode.I have tried all possible combinations but I do not suceed to arrive to normal download mode. Another question is only cyanogen exist via sd zip or also stock rom exist to install via sd zip? do you know? thanks everyone
Click to expand...
Click to collapse
if you can get into emergency download mode,, you should be able to flash a stock rom
u must go to download mode. these are 3 mothods
1.with 3 combination button
VOL DOWN + HOME + POWER BUTTON
since ur phone button is inverted, try to learn it where button is vol down, home & power
2. if your rom rooted. i think it can more easy
download "terminal emulator" and open it and write:
su
reboot download
3. install android sdk / adb
u can goto download mode with command:
adb reboot download
voetbalremco said:
if you can get into emergency download mode,, you should be able to flash a stock rom
Click to expand...
Click to collapse
in emergency download mode odin recognize the phone but the process freeze in "setup connection"
f.83 said:
in emergency download mode odin recognize the phone but the process freeze in "setup connection"
Click to expand...
Click to collapse
Drivers arent installed..
Sent from my GT-S5660 using xda premium
voetbalremco said:
Drivers arent installed..
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
I have installed kies then driver are installed otherwise odin do not recognize phone, but in my case it recognize I start to flash but the process freez in "setup connection"
f.83 said:
I have installed kies then driver are installed otherwise odin do not recognize phone, but in my case it recognize I start to flash but the process freez in "setup connection"
Click to expand...
Click to collapse
Dont know how to fix that, sometimes its a problem with adb.
Go to task manager press execute and open cmd , then type adb, wait for all commands to show and type adb devices, and see if anything is listed..
Sent from my GT-S5660 using xda premium
f.83 said:
I have installed kies then driver are installed otherwise odin do not recognize phone, but in my case it recognize I start to flash but the process freez in "setup connection"
Click to expand...
Click to collapse
try to close kies
or uninstall it. install the usb driver only
http://www.mediafire.com/?0hq8xigi9r7f7c9
oh...I can't believe to that...really, now I want say a thing to all you, take a moment to read this post, you can't imagine how many search and forum I've write and read to ask for this problem, and no one, I repeat NO ONE, is arrived to say to me the most simple thing, the BEST thing, the thing that phiexz write:
phiexz said:
2. if your rom rooted. i think it can more easy
download "terminal emulator" and open it and write:
su
reboot download
Click to expand...
Click to collapse
And I found incredible this thing, that with the many posts in other forums too that have answer to me nobody is arrived to say that answer, anyhow...I entered in dowl mode and flash with odin,the button and all the rest returned to normal functioning, then, to phiexz go my biggest THANKS!!!!
Hello guys, my nexus died
I had some problems with a rom so i decided to restore a previous backup(bigxies JB rom) which was working when i backed it up ofc.
Did the backup and hit reboot in cwm, nothing.
wont turn on wont get into fastboot no download mode nothing. when i plug in a charger no charge animation, nothing.
i tried flashing a stock rom with the nexus toolkit but it keeps saying waiting for adb. nothing happens.
windows doesnt recognize it either when i plug it in my pc..
any ideas? it seems that i am screwed
you have to install the correct drivers first, if you can get into fastboot then you can return to back stock
http://drivers.softpedia.com/get/MOBILES/Samsung/SAMSUNG-USB-Driver-for-Mobile-Phones-1550.shtml
it seems you need to read this.
DynamicRam said:
you have to install the correct drivers first, if you can get into fastboot then you can return to back stock
http://drivers.softpedia.com/get/MOBILES/Samsung/SAMSUNG-USB-Driver-for-Mobile-Phones-1550.shtml
Click to expand...
Click to collapse
well thats the problem, i cant get into fastboot with vol+vol-+power..
Afwasmassi said:
well thats the problem, i cant get into fastboot with vol+vol-+power..
Click to expand...
Click to collapse
can you get into odin mode with vol-+power, if not then search this forum for "omap flash"
DynamicRam said:
can you get into odin mode with vol-+power, if not then search this forum for "omap flash"
Click to expand...
Click to collapse
i cant get in to odin mode either, the phone basically behaves like it doesnt have a battery, no sign of life whatsoever.
Ill search omap flash, thx
when i connect my phone to the pc it shows up as omap4440 in device manager, then it disconnects and reconnects every 2 seconds..
I tried a omapflash program i found but it keeps saying waiting for phone to connect
quick update, managed to install the omap4440 drivers and reflashed my OMAP 4440, now i can get into download mode
good news guys, my phone works again, i am very happy.
thx for the omap flash tip!!
For people that might encounter the same.
download https://rapidshare.com/files/1168981...Flash_tuna.zip and unpack the zip on desktop or w/e.
now when your omap4440 is recognized by device manager quickly double click and install drivers(you have about 2 seconds) select search drivers on pc and select desktop(drivers are in the above download.
When thr drivers are installed run the *.bat file in the download
after that u can get into download mode and odin flash a stock rom.
Afwasmassi said:
good news guys, my phone works again, i am very happy.
thx for the omap flash tip!!
For people that might encounter the same.
download https://rapidshare.com/files/1168981...Flash_tuna.zip and unpack the zip on desktop or w/e.
now when your omap4440 is recognized by device manager quickly double click and install drivers(you have about 2 seconds)
then run the *.bat file in the download
after that u can get into download mode and odin flash a stock rom.
Click to expand...
Click to collapse
so it's confirmed, it works at least for download mode. THANKS!!!
Can you please confirm that fastboot/bootloader is still available?
Yes i can confirm that. Everything is working as it should!
Actually in my case i didnt even have to odin flash anything. After omap reflash everything was working. Download/fastboot even my old rom booted fine.
Sent from my Galaxy Nexus using xda premium
maybe sbl or fat32 boot partition (x-loader, uboot, kernel) was missing.
one more thing: how long did omapflash took to complete?
sent from my i9250
I am glad you fixed it
About 9 seconds mate after that it said touch any key to continue but all it did was repeat the process so after 3 times i was like ****it. And yeah i dont think major files were corrupt in my case. Just some inportant ones.
Im also glad i fixed it and i hope this will be usefull for sb else.
Sent from my Galaxy Nexus using xda premium
Glad you fixed this mate, and useful information for others.
Yeah lets hope it is usable for sb else
Sent from my Galaxy Nexus using xda premium
Afwasmassi said:
Yeah lets hope it is usable for sb else
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
i am quite sure sb will need it. i've been collecting information on dead boot state on our device, and will probably try to make it into a small guide.
sent from my i9250
bk201doesntexist said:
i am quite sure sb will need it. i've been collecting information on dead boot state on our device, and will probably try to make it into a small guide.
sent from my i9250
Click to expand...
Click to collapse
Right for the time being this could prove to be the solution to other peoples troubles
Hi OP,
Any chance you could help us on this problem?
Stuck at:
» Sending data (131072 bytes) ::::::::::.......... [65536]
I flashed SlimBean i777 and now I have no power tried all the possible combination to get into recovery and download mode. However if I plug it in to my computer I am keep getting an error device is not recognized I have tried different USB cables also tried different computers and also uninstalled and reinstalled kies. Can someone help. Thanks in advance
deziguy420 said:
I flashed SlimBean i777 and now I have no power tried all the possible combination to get into recovery and download mode. However if I plug it in to my computer I am keep getting an error device is not recognized I have tried different USB cables also tried different computers and also uninstalled and reinstalled kies. Can someone help. Thanks in advance
Click to expand...
Click to collapse
why on earth you flash i777 rom? thats for Samsung Galaxy S II. Sir, you're brick..just throw it away or claim insurance...
Damn.. not even close...
Sent from my SGH-T999 using xda app-developers app
x1tyme said:
why on earth you flash i777 rom? thats for Samsung Galaxy S II. Sir, you're brick..just throw it away or claim insurance...
Click to expand...
Click to collapse
Seriously.. we have our own Slim Rom in the development section..
joshnichols189 said:
Seriously.. we have our own Slim Rom in the development section..
Click to expand...
Click to collapse
It is becoming ridiculous how much we have of such threads lately. Wonder what fix they expect from us since they do not even bother searching which device that rom is for...
First try to get into a download mode.
If you couldn't try the following methods that used to work with Vibrant:
1. Pull the battery out
2. Hold both vol up & down
3. Hold Power button
4. Connect your usb to a PC and phone
5. Insert your battery
6. Flash any rom
VibrantThemer said:
First try to get into a download mode.
If you couldn't try the following methods that used to work with Vibrant:
1. Pull the battery out
2. Hold both vol up & down
3. Hold Power button
4. Connect your usb to a PC and phone
5. Insert your battery
6. Flash any rom
Click to expand...
Click to collapse
thanks for your help..this **** is ****ed
VibrantThemer said:
First try to get into a download mode.
If you couldn't try the following methods that used to work with Vibrant:
1. Pull the battery out
2. Hold both vol up & down
3. Hold Power button
4. Connect your usb to a PC and phone
5. Insert your battery
6. Flash any rom
Click to expand...
Click to collapse
I dont think this goona work after u flash different phone ROM. Justv my 2 cents. Correct me if I m wrong.
Sent from my SGH-T999 using xda premium
bikrame said:
I dont think this goona work after u flash different phone ROM. Justv my 2 cents. Correct me if I m wrong.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Doesn't hurt to at least try.
Sent from my SGH-T999 using xda premium
lazarat said:
It is becoming ridiculous how much we have of such threads lately. Wonder what fix they expect from us since they do not even bother searching which device that rom is for...
Click to expand...
Click to collapse
I understand people bricking from international flashes. But this was s2.... and it wasn't even our carrier lol
Sent from my SGH-T999 using xda app-developers app
---------- Post added at 07:43 PM ---------- Previous post was at 07:41 PM ----------
Easiest test... does it vibrate? If it doesn't then you have to jtag it
Sent from my SGH-T999 using xda app-developers app
I'm sorry op but I just can't understand why would you even try to flash that!
Sent from my SGH-T999 using xda app-developers app
I know that the good-majority of you lack sympathy, but damn, I feel bad for OP. It's really a tough break when things like this happen.
Hope all ends well, you probably will have to JTAG.
Sent from my SGH-T999 using xda app-developers app
I sent it to mobiletechvideo, they repair hard brick and it costs $60 a lot cheaper then buying a new phone. This wasn't the first time I ever flashed a ROM but the stupid mistake was not doing a research. I assumed that ROM is for AT&t version. I have read in this forums that as long as you don't flash At&t modem you should be fine but I know I grabbed the wrong ROM (At&t Galaxy S II). Well you learn from your mistake I finally experienced how it feels to have hard bricked phone....lol
Galaxy S2 not working after flashing rom
I was trying to Flash rom in Galaxy S2 via Odin...
But by mistake I pressed start button in Odin without inserting PDA path...... Only PIT file I have added.....and forget to add PDA
Now it is not starting any more.....not even in Recovery mode( Volume up + Home + Power button) ....
I think I lost everything........in phone.......
If anybody having some solution ...please let be needful
masu0069 said:
I was trying to Flash rom in Galaxy S2 via Odin...
But by mistake I pressed start button in Odin without inserting PDA path...... Only PIT file I have added.....and forget to add PDA
Now it is not starting any more.....not even in Recovery mode( Volume up + Home + Power button) ....
I think I lost everything........in phone.......
If anybody having some solution ...please let be needful
Click to expand...
Click to collapse
This is the T-Mobile S3 variant forums, try asking in your device's forum
i unpluged the device before dhe odin finished his job ( by mistakeee ) and now it doesnt turn on , charge , go to recovery/odin , hold down power button for 30-60-120 sec nth hapend, it has baterri 90-100 % . plss guys help me :'( i have an samsung galaxy s advance .
I installed recovery.tar.md5 in my sm-g507f/dd and now I have no power tried all the possible combination to get into recovery and download mode. However if I plug it in to my computer I am keep getting an error device is not recognized I have tried different USB cables also tried different computers and also uninstalled and reinstalled kies. Can someone help.
pratham vats said:
I installed recovery.tar.md5 in my sm-g507f/dd and now I have no power tried all the possible combination to get into recovery and download mode. However if I plug it in to my computer I am keep getting an error device is not recognized I have tried different USB cables also tried different computers and also uninstalled and reinstalled kies. Can someone help.
Click to expand...
Click to collapse
Wrong forum, this is the T-Mobile Galaxy S3 forum
android one
i flashed stock rom in my spice android one... after flashing it got struck on spice logo... ithought it was a flashing error ad tried again this time(format + download) now it is completely stopped even the spice logo is also not comming... i tried to flash many a times but no response... but my phone is still detected by sp flash tool.. what could be the reason
Hiii please give me solution for Lava iris 60
Problem after flashing custom ROM phone not to be start
? By mistake install AIS lava iris 60 costom Rom file and after not to be start phone .... Totally are ded ... Please give me solution
My phone is stuck at the samsung logo for about 30 min. I tried flashing another rom but it didnt work. I can access download mode but not recovery mode.
What is my possible solution?
If the 3 button method doesn't work you may be able try ADB to get into recovery.
Sent from my SGH-I747 using xda app-developers app
Thenewguy1 said:
If the 3 button method doesn't work you may be able try ADB to get into recovery.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
The three button method as in "Download Mode"?
ThatGuyIsEpic said:
My phone is stuck at the samsung logo for about 30 min. I tried flashing another rom but it didnt work. I can access download mode but not recovery mode.
What is my possible solution?
Click to expand...
Click to collapse
If you can get into download mode, then ODIN TWRP to your phone. Or ODIN the proper rooted ROM.
Sent from my SGH-I747
aybarrap1 said:
If you can get into download mode, then ODIN TWRP to your phone.
Sent from my SGH-I747
Click to expand...
Click to collapse
Do I flash TWRP in the PDA box on Odin?
Also note that I tried different usb cables and usb ports but nothing is working its still stuck at the boot screen
aybarrap1 said:
If you can get into download mode, then ODIN TWRP to your phone. Or ODIN the proper rooted ROM.
Sent from my SGH-I747
Click to expand...
Click to collapse
I flashed TWRP and tried booting into recovery mode but it doesnt work I get the samsung logo and in the top left hand corner I get recovery boot in blue text then after that it goes black
Is my device useless now?
aybarrap1 said:
If you can get into download mode, then ODIN TWRP to your phone. Or ODIN the proper rooted ROM.
Sent from my SGH-I747
Click to expand...
Click to collapse
All the ROMs I know require you to flash via ClockworkMod is there any ROMs you can flash with Odin?
ThatGuyIsEpic said:
I flashed TWRP and tried booting into recovery mode but it doesnt work I get the samsung logo and in the top left hand corner I get recovery boot in blue text then after that it goes black
Is my device useless now?
Click to expand...
Click to collapse
Vol up + home + power. When your device vibrates and you see the blue text, release just the power button
xbeerdroidx said:
vol up + home + power. When your device vibrates and you see the blue text, release just the power button
Click to expand...
Click to collapse
thank you so much i got it work :d
ThatGuyIsEpic said:
All the ROMs I know require you to flash via ClockworkMod is there any ROMs you can flash with Odin?
Click to expand...
Click to collapse
Uhhg
Just 5 minutes of reading and looking for and answer and you wouldn't have to make this thread -_-
http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware
Any of those firmwares will work on a i747
If you have a i747M or you're not ATT look here and select your correct phone information in the drop down boxes:
http://www.sammobile.com/firmwares/1/
These will restore you to factory, you will still have to root.
I still cant get my phone to work.
I have done this many times and the galaxy s3 logo comes up and then nothing..
I wasnt rooting my phone i was charging it last night.... the phone got hot so i unplugged. I tried to turn it on in the morning and it wouldnt turn on. i know how to put my phone in recovery mode, ive done it before but it wont. it will go into download mode but thats.about. it. I know i dont know much about phones but i know how to put it in recovery mode to clear the cache and that isnt working.... any thoughts?
jessicarabbit85 said:
I still cant get my phone to work.
I have done this many times and the galaxy s3 logo comes up and then nothing..
I wasnt rooting my phone i was charging it last night.... the phone got hot so i unplugged. I tried to turn it on in the morning and it wouldnt turn on. i know how to put my phone in recovery mode, ive done it before but it wont. it will go into download mode but thats.about. it. I know i dont know much about phones but i know how to put it in recovery mode to clear the cache and that isnt working.... any thoughts?
Click to expand...
Click to collapse
Does the phone actually connect to your pc? I assume you have the proper drivers installed? Open odin while in download mode and see if it detects the phone. Sounds as if the phone's bootloader is screwed. If its detected you should be able to fix without much trouble. Sometimes you have to flash the original stock rom as the newer ones sometime have trouble for whatever reason. Version 4.0.4 i believe.
scotteb said:
Does the phone actually connect to your pc? I assume you have the proper drivers installed? Open odin while in download mode and see if it detects the phone. Sounds as if the phone's bootloader is screwed. If its detected you should be able to fix without much trouble. Sometimes you have to flash the original stock rom as the newer ones sometime have trouble for whatever reason. Version 4.0.4 i believe.
Click to expand...
Click to collapse
I dont have odin on this computer, when i plug it in it isnt recognized, i assumed that was because it wasnt technically powered on. I guess i'll take it to someone tomorrow to have it looked at.... im so out of my element here... thanks.
jessicarabbit85 said:
I dont have odin on this computer, when i plug it in it isnt recognized, i assumed that was because it wasnt technically powered on. I guess i'll take it to someone tomorrow to have it looked at.... im so out of my element here... thanks.
Click to expand...
Click to collapse
If you can get the phone into download mode , it should auto install your drivers and make it recognizable by Odin.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Download Odin_Multi_Downloader_v4.42 from HERE
Download GIO_v1.0,ops from HERE
Download samsung galaxy gio s5660m Firmware from HERE
Samsung_usb_driver HERE Thanks for Peteragent5 for this software
1. Turn off your phone
2. Go to download mode by holding Home+Volume Down+Power Button
3. if the pink appears press the Volume up button
4. open Odin_Multi_Downloader_v4.42
5. click ops and choose the Gio_v1.0.ops
6. click the one package and make sure that the auto reboot and protect ops
7. click one package button at the lower right side
8. connect your phone to the computer using usb cable
9. wait until the odin detects your gio just look into the message at the lower left side and the com port mapping is turn to yellow
10. then click start button and wait until your gio will reboot, it can takes from 5-10 minutes
11.after flashing go to recovery mode and wipe data/ factory reset
12 REBOOT and enjoy!
I HOPE ITS helped
Nice guide for newbies:thumbup:.
Do install mobile drivers also b4 proceeding
Sent Via XDA™ Premium
Galaxy_Rohit said:
Nice guide for newbies:thumbup:.
Do install mobile drivers also b4 proceeding
Sent Via XDA™ Premium
Click to expand...
Click to collapse
thanks for reminding me dude.., ok i will edit
Can someone tell me if i should see some kind of action when using Odin apart from the clock?
I'm already almost 1 hour waiting to finish and nothing happens.
I know the phone is connected, I know clock is running but nothing else.
On my phone i only get this:
"Emergency Dload Mode
(ARM9 mode)
SAMSUNG"
I get this after i've been waiting for 20 minutes and unplug it from the phone. After i get an image with a phone and a computer with a yellow sign on the midle, and then when i press the keys to get in to download mode i get this "Emergency message".
Please someone tell me if i should keep waiting or if this is wasted time...
Thanks
rvrosa said:
Can someone tell me if i should see some kind of action when using Odin apart from the clock?
I'm already almost 1 hour waiting to finish and nothing happens.
I know the phone is connected, I know clock is running but nothing else.
On my phone i only get this:
"Emergency Dload Mode
(ARM9 mode)
SAMSUNG"
I get this after i've been waiting for 20 minutes and unplug it from the phone. After i get an image with a phone and a computer with a yellow sign on the midle, and then when i press the keys to get in to download mode i get this "Emergency message".
Please someone tell me if i should keep waiting or if this is wasted time...
Thanks
Click to expand...
Click to collapse
are you sure that did you used the right firmware for your gio?
badagila said:
are you sure that did you used the right firmware for your gio?
Click to expand...
Click to collapse
I'm almost sure.
How can i be sure?
rvrosa said:
I'm almost sure.
How can i be sure?
Click to expand...
Click to collapse
there is four kind of gio: S5660m, S5660v, S5660L and S5660
which one is yours?
badagila said:
there is four kind of gio: S5660m, S5660v, S5660L and S5660
which one is yours?
Click to expand...
Click to collapse
GT-S5660
Check again... It's Home+Volume Down+Power Pressing vol. up(by mistake) takes u to ramdump mode...if I'm not wrong.
Sent Via XDA™ Premium
Galaxy_Rohit said:
Check again... It's Home+Volume Down+Power Pressing vol. up(by mistake) takes u to ramdump mode...if I'm not wrong.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
maybe your right dude
but make sure that you gonna flash the right firmware for your gio dude or else? i don't know what will happen next
USB Problem
My gio i can´t flash via odin... the computer don´t reconize it. It says USB not Reconized.
desluca said:
My gio i can´t flash via odin... the computer don´t reconize it. It says USB not Reconized.
Click to expand...
Click to collapse
have you already installed the usb driver?
Yes i alredy instaled the Samsung kies and the msg its the same...
desluca said:
Yes i alredy instaled the Samsung kies and the msg its the same...
Click to expand...
Click to collapse
no not only kies also the driver. the USB DRIVER see the lik at the first post
Ok i will try to download the usb drivers for Gio.
Ok dude btw what kind of gio di you have?
sent from any where out there!
how to flass and instaal custom rom to galaxy gio olleh
badagila said:
Download Odin_Multi_Downloader_v4.42 from HERE
Download GIO_v1.0,ops from HERE
Download samsung galaxy gio s5660m Firmware from HERE
Samsung_usb_driver HERE Thanks for Peteragent5 for this software
1. Turn off your phone
2. Go to download mode by holding Home+Volume Down+Power Button
3. if the pink appears press the Volume up button
4. open Odin_Multi_Downloader_v4.42
5. click ops and choose the Gio_v1.0.ops
6. click the one package and make sure that the auto reboot and protect ops
7. click one package button at the lower right side
8. connect your phone to the computer using usb cable
9. wait until the odin detects your gio just look into the message at the lower left side and the com port mapping is turn to yellow
10. then click start button and wait until your gio will reboot, it can takes from 5-10 minutes
11.after flashing go to recovery mode and wipe data/ factory reset
12 REBOOT and enjoy!
I HOPE ITS helped
Click to expand...
Click to collapse
can i use this instrutction for my samsung galaxy gio olleh(korian version shw m290k.ed15.1936.kt)
Yes you can but you need to dl the firmware for your own region aand do not use the firmware from the link above
sent from my head
press thanks button if it helps
how to flass and instaal custom rom to galaxy gio olleh
badagila said:
Yes you can but you need to dl the firmware for your own region aand do not use the firmware from the link above
sent from my head
press thanks button if it helps
Click to expand...
Click to collapse
please can you tell how i do that.can you give me the correct firmware's link?pls pls