[HOW-TO] UNBRICK HTC t328w (DESIRE V) cable-free method using RUU!!! - Desire General

PLEASE STICKY IF THIS IS HELPFUL!!!
ALSO ON THE HTC ONE V FORUM (since this phone is like a hybrid of that and this, the desire....and doesn't have it's own dedicated forum hahaha)
Hello Everyone, just yesterday I was messing with gapps on my HTC t328w (since it's a chinese phone, it didn't not come with gapps, so I had try to flash them myself) and I made some mistakes, which basically ended up soft-bricking my device (unable to update gapps since I had merged the entire system folders instead of just copying system/app), and it would not boot to the home screen.
After looking for a while I had found the RUU for this phone, however, the .exe just did not work for me, it wouldn't detect my phone (maybe incorrect drivers, but I can't be sure of that as my phone was rooted using the same computer)...
So after some thinking and working stuff out, I came up with method (well, at least for this phone, it has been done for other phones before), so I present you...
HOW TO UNBRICK THE HTC T328W DESIRE V (HTC WIND FROM CHINA UNICOM
What you need
-The phone, obviously (try to have battery above 30%)
-***RELOCKED*** bootloader
-The RUU found here (download the .exe) (Thank you island3r!)
-Micro SD card
Ok!~~~
Let us begin...
1.) Run the RUU exe file, and when it's done preparing, go to start > run, and type in %temp%, you should see the temp folder pop up...
2.) In the temp folder, look for the file with the longest name (that was my qualitative observation, needs clarification~!), and scroll down and find rom.zip
3.) Rename rom.zip to PL11IMG.zip, and transfer it to the root of your micro sd card (with the adapter in your computer, as you can't with your phone...since it's bricked...)
4.) Take the micro-sd card out of your computer, slide it in your phone, and boot into HBOOT (volume down + power button).
5.) When you are at the hboot screen, press the down button once, you should see the phone scan the SD card, it will say in about 5 - 10 seconds "PL11IMG.zip found....checking.....loading", there is a vertical progress bar on the top right side of the screen so you can be sure that it's not frozen or something...
6.) After it is done checking, it should bring up a menu to update and say press vol+ for YES and vol- for new, we need to flash this update/restoration so press the the volume up button...
7.) It will do something for about a minute, and go BACK to boot loader, repeat step 5 and 6 (this happened to me, I really don't know if this will happen to others...someone please test this?)
8.) Now that you have said YES to update the second time, wait about 10 minutes (you can watch the progress bar too), and it will say "update completed, press power to reboot"
9.) Reboot, and your phone is good as new!!!!* ^______^
*I mean it when I say that, it is literally good as new; it will wipe everything, and you need to activate your phone again and set up and all that stuff
I NEED TESTERS AND CONFIRMERS....HELP ME OUT WITH THIS METHOD PLEASE
Hope you found this helpful! Post if you have any comments, concerns, or any thing that should be added on (this is my first guide hahaha )

I cannot execute as above as i never get to step #6.
----------------
My T328W came with OS version 1.35.
Recently it got an OTS update to 1.56.
This happened while i was in process to unlock boot-loader, root the phone, and begin installation of gaps.
Now the phone seems to be in "NEVER NEVER land". I cant do much with it. WIFI and Bluetooth are not working.
I can readily lock and unlock the boot-loader.
The security is on. S-ON.
I want to go back to 1.35 (factory shipped version) but cannot as different errors come up when trying ton install RUU. I do have the original version RUU it shipped with.
There seems to be much confusion as to how install this orignal RUU. S-ON or should it be OFF. How do i turn it OFF.
BASICALLY
I want to get the phone completely back to shipped version. So then i can begin the root, and gaps installation.
Any thoughts?
Thanks

Helpful guide
it works. Thank you.
how do you install Google Play in your chinese Version (China Unicom) T328W, build 1.35.1402.1?

This method would not work for device which have HBOOT 1.14.0002 and S-ON (device which have received 1.56.1402 release OTA update). Mind one got this and when I flash the zip, the phone say "HBOOT is older" cannot update.
I see someone in androidforum post that there is a method to flash only system, data and recovery (what he call mini-RUU) but I dont know whether it work or not if I fash 1.35.xxx rom to my newer HBOOT device.
If someone have experience could help me confirm it, I am sorry that I am hersitated to test myself cause I dont have any backup rom for my device, I am scare if it would soft-brick my device (it's currently have and missing feature rom - missing notification bar, but at lease it still work and allow my to whatsapp with my wife). Please help.

what do you use to root htc t328t???
Sorry if this question was answered elsewhere... (I didnt seem to find it so..)... what did you guys use to root your htc t328 chinese models?? and more specifically if possible htc t328t..
I want to root my phone but keep the stock rom (just clean out some of the junk rom programs and add .apks to run google play...)
Thank you very much in advance for answering this question. I'm not too dumb with pc's but this is my first smartphone and I don't want to brick it or anything ^^
PS I'll definitly :good: anyones answer

I have written about my process to root the t328w from China. You can find it at my thread here http://forum.xda-developers.com/showthread.php?p=28172565 . Good luck!

root
axbhtc said:
Sorry if this question was answered elsewhere... (I didnt seem to find it so..)... what did you guys use to root your htc t328 chinese models?? and more specifically if possible htc t328t..
I want to root my phone but keep the stock rom (just clean out some of the junk rom programs and add .apks to run google play...)
Thank you very much in advance for answering this question. I'm not too dumb with pc's but this is my first smartphone and I don't want to brick it or anything ^^
PS I'll definitly :good: anyones answer
Click to expand...
Click to collapse
-unlock bootloader
-flash recovery cwm
HTC T328T Recovery
http://115.com/file/anp0mjcc#
Click to expand...
Click to collapse
-recovery cwm--> install CWM-SuperSU-v0.92.zip --> root done

Related

WiFi error after update 2.10.405.2

Hello
Few days ago I was prompted to install update 2.10.405.2. After the installation I can't enable wifi anymore; it simply says error. I just got my phone 2 weeks ago on an Orange contract (from mobiles.co.uk), but when I contacted HTC they said that my phone should be a branded and locked O2 Desire. HTC said that because my phone was unbranded the update messed my phone. Is that possible?
I noticed that quite a few people are affected by this, but the guy from HTC wouldn't say if they are aware of this problem or if they are working on a fix. They "escalated" the call but haven't contacted me back yet.
Is there a way to simply uninstall the update?
I read this post http://forum.xda-developers.com/showthread.php?t=779787 but I wouldn't want to downgrade to 2.1 (I just got this phone 2 weeks ago, plus this is my first Android so...) wouldn't that invalidate my warranty ?
Please advise,
Thanks
If your Desire was a previously branded handset then you need your gold card in the unit for ALL updates. This is why the handset is having issues...
I didn't know that.
Why was I given a previously branded phone in the first place, if this could cause problems like this?
Anyway, I made my main microSD card a gold card now... for future updates. Does this gold card just needs to be in the device when you update, or you need to do something else as well ?
Is there a way to simply uninstall this bloody update?
You just need the gold card in the unit...Don't suppose you happen to know the software version that was on the unit when you got it do you?
Unfortunately no. But this was the first and only update that I got, if that helps.
Same issue here, is a hard reset/reflash the only solution? I'd rather not lose my files and stuff, ofcourse.
It would be either 1.21.405.2 or 2.09.405.8 I'd imagine...
CPW own mobiles.co.uk so it should've been an unbranded device - mine was from a CPW store and was unbranded - so it may have not been a branded unit. Follow this guide and if it completes with no issues you're on an unbranded unit (it will roll you back to Android 2.1 and you can then flash the Android 2.2 RUU file directly (or try the OTA update again)*
http://forum.xda-developers.com/showthread.php?t=768256
* You will lose all data, mind, so backup what you need before doing this
Will this invalidate my warranty?
I also contacted mobiles.co.uk (as HTC suggested) to ask them why on HTC database my phone apears as a branded O2 phone, but still got no answer from them. You are saying that it should have been an unbranded Desire ?
No it won't, if it completes then you've got a generic Desire and that guide puts you back to stock 2.1...you can then update again to 2.2 and HTC won't know a thing...
I'm saying it should have been an unbranded Desire going from my experience of CPW - that's not to say EVERY Desire will be unbranded as it depends where they got the stock from
Quote from post : [HOWTO] Downgrade Froyo (2.2) to Stock 2.1 (ANY HBOOT | WIN/LINUX/MAC | ROOT)
"Further Information
If you want to flash an alternative RUU (e.g. a branded 2.1 release), just skip the downgrade section at the end by pressing vol-down on the phone when the utility has completed. Then reboot the phone and run the RUU you want. If you have an SLCD screen you should be very careful here - most RUUs don't support the screen."
Question: Do I need to skip the downgrade?
My model number is HTC Desire A8181 - is this with SLCD screen?
I have downloaded RUU_Bravo_Froyo_HTC_WWE_2.10.405.2_R_Radio_32.44.00.32U_5.09.05.30_2_release_142828_signed.exe
Is this ok to flash after this process?
Sorry, I am a novice (got the phone 2 weeks ago) and did not expect to bump into problems like this so early.
Please help, I wouldn't want to brick my phone.
The guide downgrades you to the stock 1.21.405.2 ROM which is fine for SLCD screens. You can then either use that RUU or just do the OTA update again - whichever you prefer (personally, I use the RUU)
There should be no issues if you follow the guide to the letter
Other thing to try first, though, is a hard reset - it might fix it for you
Just did a hard-reset. It didn't help. Will try downgrading and let you know how it went.
I did the downgrade and now the wireless is working again )
I'm flashing that RUU now
Thanks so much EddyOS
No worries matey, just keep the gold card in the phone and you shouldn't have issue in future
I had the same problem.
No WiFi and hotspot after ota.
This because i forgot to put in my goldcard...
Easiest way to fix it is to make a goldcard, then get the .zip file from the 2.10.405.2 update and place it on the goldcard.
Rename it update.zip.
Put the goldcard in your phone.
Then enter recovery mode (reboot your phone, when turning on hold the lock button and volume down button)
Select recovery in the menu you get, then wait, after a while it shows you a few options. Choose the option to run the update.zip.
Done, everything works perfectly.
Its really easy, only making the goldcard out of an SD requires a little searching/reading.
Good luck!
Edit: forgot to say it doesnt erase any data, like apps and contacts.
Just be sure if you use your current SD card as goldcard to copy everything to your pc before making it. Then you can put it back later on.
Finaly back to the latest 2.2 Android. Updated using OTA.
Tried updating with RUU but for some reason after the RUU rebooted the phone to start the update, the phone got stuck on the HTC screen and the RUU timed out; tried it several times.
But I'm back on track now.
Will keep the goldcard in at all times. Lesson learned the hard way.
DaannRoz - unfortunately I already did the hard-reset...
Thanks everybody.
Thanks DaannRoz
I put a new 16gb into my phone a while back and put it through the gold card process so I thought it should work. It didnt and I got the Wifi error code. I put the original gold card in and went through the steps you provided and got my Wifi back. It saved me from reflashing the phone and wiping out all my apps and data.
I anyone gets a picture of a phone with a red triangle and a apostrophe in it you need to push and hold the volume key up and then press the power button to get to the rom select screen.
Thanks Daan..
Just stuffed my Desire. Will try the update via recovery @ home.
BTW is this the update you want me to do ??
http: / / fotadl.htc.com/OTA_Bravo_HTC_EU_2.10.405.2-2.09.405.8_releaseol2djq7rqarka2ka.zip[/url]
Cheers,
Sai
Thanks Daan...now my Wifi works...
@Sai> I used the link provided by you..thnx.. (Hope its an original one!!!)
saro
I got the same issue. After reapplying the update with an update.zip and the recovery mode --with gold card inside at this moment-- everything goes fine and my WiFi works again...

[Q] New Zealand Wildfire S

Hi all and greetings from New Zealand....
I have a Telecom NZ Wildfire S (A510b) and really want to get rid of the HTC Sense to give more space (and more features).
I have previously rooted & modded my Huawei 8150 (CM7 2.3.5), and thought it would be an easy process on the Wildfire, but I find it aint so.
The only way I've managed to get to the bootloader is via HTC SuperTool V2 as the usual Vol- and PWR don't work on this phone. Are there any other ways to bootloader?
I've looked thru HTCDev and seen the new process including downloading the RUU, however my phone does not show there so was hesitant to try that method.
Anyone got any suggestions as to how to proceed from here for my WFS?
Cheers,
Aaron
You need to power off then remove battery
Then replace battery
Press volume down and power
Then you should be where you need to be mate.
Alternatively in your settings I think its under power in sense Roms, turn off fast boot and repeat steps above.
Only difference being you don't need to remove battery.
Thanks, I'll try that today, it's off to work now.. selling.. funnily enuff, Wildfire S's amongst other stuff.
This how to do it mate, worked for me! Hope it works for you
Ok so I brought the phone from Telecom, it says its a A510b, model number PG76120 (found behind the battery, just below the SIM card slot)
So what I have done to achieve this result:
1: Simply sign up to the HTCdev website www.htcdev.com/bootloader/ once done, select the HTC Wildfire S from the drop list to begin
2: After accepting all the terms and agreements bla bla their is a list of ROMS, their was only 3 options for the model that I have PG76120, so I downloaded the HTC Thailand RUU
3: Ok so if you end up running the RUU it will tell you that the ROM is out of date with an error message, what I found out (this took me all day...) when you first open the RUU (this is if you run Windows) their will be a Temp folder made with all the files that the RUU needs to run, if you search the Temp Folder (usually found under the user folder in Documents and Settings\<User>\Local Settings\Temp) these files will only exist if you leave the RUU Program open, so just open it up and move the window to the side, search under the Temp folder for rom
4: You will find 2 zip folders named rom_01 and rom_02, copy these 2 zips to your desktop
5: Now change the name of rom_01 (im not 100% sure if its 01 or 02 that you need to do first, I cant remember) to PG76IMG and copy it over to a microSD, insert into your phone and boot into HBoot, it will go through the normal process of detecting and then opening the zip and will ask you if you wish to update the radio to v2 (it should only ask to update the radio, because you need to do it first before you use the second file which asks to update both the radio and hboot) allow to do so and it will do its thing and when completed ask to reboot.
6: Now change the name of the second rom (if I have the order right this should be rom_02) to PG76IMG, remove the first file you put on the microSD and replace it with second, back into HBoot, it will read the file and ask you to update HBoot and Radio, allow it to do so and it will update the HBoot, should say OK next to HBoot, once completed it will ask to be rebooted
7: To check that this has all happended correctly, go back into HBoot (remove your microSD before this) and you should have a pink box up the top stating *LOCKED* if you see this and your HBoot version is now 1.08.0099 (if you used the RUU that I did) you are now ready to go through the HTCdev Bootunlock process
8: Do the HTCdev Bootunlock process, it is straight forward and easy to do!
9: Forget needing to use the XTC and starting modding you HTC Wildfire S!!!
Dude!!!! worked for me - so stoked, thanks heaps!!!
Yeeeeeaaah!
Awesome stepthru, worked a treat... just gotta get me a ROM now, thanks man!
aaronpnz said:
Yeeeeeaaah!
Awesome stepthru, worked a treat... just gotta get me a ROM now, thanks man!
Click to expand...
Click to collapse
Stoked I could help another kiwi im looking through ROMS atm... I have no idea which to go for! CyanogenMod seems to be a beta, has no marketplace...
Update
OK, so I thought I'd do an update as to where I'm at with this:
Unlocked using the process above, one bit of advice I'd throw in is to leave the SD card OUT while doing the HTC unlock bit.. took me a couple of goes to get past that bit!
So now I have a WFS that has hboot unlocked, and now rooted via HTC Supertool thingy...
Have downloaded Clockwork Rom Manager, but theWFS is not listed in the options there so appears to not be working correctly as not able to flash to WFS set up.
Looking for alternate ways to flash a ROM to the WFS, if you know how to do it and know of a good ROM, please let me know!
Cheers
Follow this thread:
forum.xda-developers.com/showthread.php?t=1431969
It will root and install CWM for you, its awesome
In the way of a ROM, I have installed CM7 but don't really like the feel of it, its like being back on Froyo...
Update 2
OK, si I used the link above to get CWM on the WFS, worked, got quite worried about 90 mins later when WFS was still bootlooping or something, but then it woke up and hey presto CM7 running 2.3.7.
It does look/feel like Froyo but it's ok and I get more space on phone.
Camera flash locks up still, few other small things. have overclocked to min 480, max 787 ondemand, seems stable enuff for now. I'll keep an eye on battery life tho.
BUT I DO want market...
When I use ROM manager, I'm getting a messasge saying I need to Flash CWM Recovery and to install it, but keep getting message that I need stable internet connection etc. have tried on wifi & 3G.. bit nothing... any suggestions?
Might use the batch file to flash again and try another build later....

Stuck on safety screen following RUU flash plaus other issues

Hi. Firstly yes I have read, thread after thread after thread and I am now the owner of a useless phone.
Rom RUU_Buzz_TMO_UK_1.14.110.1_Radio_13.45.55.24_3.35.15.19_release_130442_signed
Kernal no clue right now
Radio 3.35.15.19
Hboot 6.01.1002
s- off
Tweaks / coustomizations you installed. none now
Memory card partitions info. it is partitioned but I cant remember now what size.
Brief history.
I was running latest CM7 but could not get GPS at all. I tried to flash various radio updates and got nowhere. In fact I only successfully flashed one and then I lost all my contacts and the damn phone decided not to sync with gmail so I thought sod it I will go back to stock and ran RUU_Buzz_TMO_UK_1.14.110.1_Radio_13.45.55.24_3.35.15.19_release_130442_signed exe.
Now I am stuck on the safety screen and bootloader is saying there is no backup etc.
Now. I have read through various threads, tried various things but I cant get teh damn thing to work.
Please dont say I should read this thread etc because I can assure you I have just been through 4 hours worth of them today and christ knows how many on this and other sites over the past month trying to get this bloody phone to work properly.
Can anyone give me some clear instructions where I can find out what my exact modle is, as I am beginning to think the processor etc in this phone is different to the ave Wildfire.
I dont care if its branded, stock, modded. I need it to txt, phone, www and GPS. Right no I just got the safety bar and no way of accessing the menus.
Chers. Chris
Im guessing I need to drop a rom in the SD card and recover that image.
But what ROM Ive downloaded every single one I can find. When I run recovery, there is a picture of a phone with a caution sign on it.
Step 1 - Recovery fix
Hi there!
The problem is that you don't have the correct recovery installed or this has been corrupted. Now, before we get started I just need to ask one question, as stupid as it may seem, I just need to make sure.
Do you own a HTC Wildfire (i.e. Buzz) or a HTC Wildfire S?
If it's the S one DO NOT try this fix! It may be that you have been trying to install the wrong soft on your phone an that's why it's not working. Instead, go to the HTC Wildfire S section of the forum.
However, if it's the regular HTC Wildfire (i.e. Buzz) you can proceed.
I've put together a little fix for you, just follow the steps below:
0. Download attached file and extract it somewhere easy to access.
1. Start phone in bootloader. ( volume down + power button)
2. Wait for phone to settle. (detects SD card, etc.)
3. Using volume buttons go to FASTBOOT and then select it by pressing the power button.
4. Connect your phone to the computer via USB cable.
6. Browse to the folder where you extracted the attachement and run as administrator the file flashrecovery.bat (right-click and select 'Run as administrator')
7. Follow the steps on screen.
8. All done! Now you should be able to go into RECOVERY to install a custom ROM.
OK I finally flashed a RUU that is working. Its from Japan with English option. But I have a working phone. It just wont access the market or any email and thinks im asian.
Has anyone got a working stock rom for a UK buzz please.
Krizztoff said:
OK I finally flashed a RUU that is working. Its from Japan with English option. But I have a working phone. It just wont access the market or any email and thinks im asian.
Has anyone got a working stock rom for a UK buzz please.
Click to expand...
Click to collapse
I was just about to write step 2 of the fix I gave above.
However, if you just want a HTC stock ROM just install the one below:
RUU_Buzz_Froyo_HTC_WWE_2.22.405.1_Radio_13.55.55.24H_3.35.20.10_release_160191_signed.exe
---------- Post added at 06:52 PM ---------- Previous post was at 06:50 PM ----------
Since your phone is S-OFF with the Revolutionary HBOOT, the HTC stock ROM won't be able to overwrite the HBOOT which is a good thing.
However, it WILL overwrite the recovery so if you want to install the recovery at a later date you will have to go through the Step 1 listeb above.
ovimunt said:
Hi there!
The problem is that you don't have the correct recovery installed or this has been corrupted. Now, before we get started I just need to ask one question, as stupid as it may seem, I just need to make sure.
Do you own a HTC Wildfire (i.e. Buzz) or a HTC Wildfire S?
If it's the S one DO NOT try this fix! It may be that you have been trying to install the wrong soft on your phone an that's why it's not working. Instead, go to the HTC Wildfire S section of the forum.
However, if it's the regular HTC Wildfire (i.e. Buzz) you can proceed.
I've put together a little fix for you, just follow the steps below:
0. Download attached file and extract it somewhere easy to access.
1. Start phone in bootloader. ( volume down + power button)
2. Wait for phone to settle. (detects SD card, etc.)
3. Using volume buttons go to FASTBOOT and then select it by pressing the power button.
4. Connect your phone to the computer via USB cable.
6. Browse to the folder where you extracted the attachement and run as administrator the file flashrecovery.bat (right-click and select 'Run as administrator')
7. Follow the steps on screen.
8. All done! Now you should be able to go into RECOVERY to install a custom ROM.
Click to expand...
Click to collapse
Hi yes its a Wildfire (buzz). something odd about it as I flashed 5 RUU's and none of them worked and now im up and running on a Korean language with English option.
Just stick onto that Korean ROM and then run the one in my previous link. That is the HTC Stock World Wide ROM - it should work on ANY HTC Wildfire (Buzz).
ovimunt said:
Just stick onto that Korean ROM and then run the one in my previous link. That is the HTC Stock World Wide ROM - it should work on ANY HTC Wildfire (Buzz).
Click to expand...
Click to collapse
Cheers. I am not a lover of the stock HTC rom, but I need the GPS to work and CM7 just doesnt and I have no intention of becoming a wizzkid at tweaking phones just to get them to do what they should, which it seems CM7 will make me.
At least I got teh phone to work without help which I am chuffed about. But I cannot even connect to market contacts or facefarce with this present one.
ovimunt said:
Just stick onto that Korean ROM and then run the one in my previous link. That is the HTC Stock World Wide ROM - it should work on ANY HTC Wildfire (Buzz).
Click to expand...
Click to collapse
What I meant is that now that you have a ROM installed you don't need to go through the steps that I was planning to explain.
Instead, if you want to get the stock HTC ROM all you have to do is to run the RUU that I mentioned in one of my previous posts.
RUU_Buzz_Froyo_HTC_WWE_2.22.405.1_Radio_13.55.55.24H_3.35.20.10_release_160191_signed.exe
As I was also saying, this ROM is definitely going to work fine on your phone.
ovimunt said:
What I meant is that now that you have a ROM installed you don't need to go through the steps that I was planning to explain.
Instead, if you want to get the stock HTC ROM all you have to do is to run the RUU that I mentioned in one of my previous posts.
RUU_Buzz_Froyo_HTC_WWE_2.22.405.1_Radio_13.55.55.24H_3.35.20.10_release_160191_signed.exe
As I was also saying, this ROM is definitely going to work fine on your phone.
Click to expand...
Click to collapse
Cheers. I overlooked this file as I thought it might be in a foreign language. Its all working except a training app that needs root and I really cannot be bothered. Owe you a beer.
Rooting you phone, again
Krizztoff said:
Cheers. I overlooked this file as I thought it might be in a foreign language. Its all working except a training app that needs root and I really cannot be bothered. Owe you a beer.
Click to expand...
Click to collapse
If you really want ROOT, that's easy enough to do now that you have the ROM I recommended. There's 2 ways depending on the HBOOT that you now have now your Wildfire. The stock ROM may have overwritten the Revolutionary HBOOT so you first need to check that:
1. Start you phone in boot mode (volume down + power) and see what the version number is.
2. If it's Hboot 1.01.0001 then you have HTC stock HBOOT so now you also have to look at the very first line to see if it's S-OFF or S-ON.
3. Otherwise, if it's Hboot 6.01.1002 (or anything that starts with 6) then you're still on Revolutionary HBOOT.
Now, based on the findings of the above, chose the option that suits you:
Option 1: for Revolutionary HBOOT 6.01.1002
1. Simply follow the steps in my very first post in this thread to restore your recovery. (this will have been overwritten by the stock RUU).
2. Copy the Superuser-3.0.7-efgh-signed.zip (see attached) file to your SD card, boot into recovery and install the zip. Now, you'll have root.
3. [Optional - only needed for some apps to run in root] Go to the Market and download BusyBox then install it in both locations, i.e. system/bin and then system/xbin.
4. That's it! You're all rooted now!
Option 2: for HTC stock HBOOT 1.01.1001 with S-ON
1. Go through the Revolutionary process again and at the end it will ask you if you want to install a recovery. Make sure that you DO!
Now follow steps 2 - 4 from Option 1 above.
Option 3: for HTC stock HBOOT 1.01.1001 with S-OFF
Well, this is very unlikely to happen but if it does you can either:
1. Try to use Unrevoked and then you may need to do step 3 from Option 1.
2. Or simply go straight to steps 2 - 4 from Option 1 above.
THAT'S IT! Now you should have root again!

[Q] Help needed with Desire Z

Hello,
I tried to help out a friend with rooting a Desire Z. He used the guide on http://forum.xda-developers.com/showthread.php?t=1178912. He was still on stock and everything and the guide pointed to that to do first.
According to him everything went fine untill he got at point "I - 4a) Manual Downgrade". After reviewing the files he had used it seemed to me that he had used the G2 version of PC10IMG.zip instead of the Desire Z version (could see it when inspecting how large the file was)
He told me that all other steps before (the temp rooting etc etc) was no problem. And after he rebooted his phone the install of PC10IMG started. After the first reboot however the phone stuck.
The situation now is a follows:
* phone does not boot. It gets stuck at the white screen with green HTC letters/logo and then does nothing
- S-ON
- Phone does boot into Hboot (version HBOOT-0.82.0000)
- RADIO-26.02.01.15_m2
- eMMC-boot
I can get into Fastboot and can send commands thru adb to the phone. However commands that try to flash result in a FAILED blabla signature. Probably since its S-ON status
SDcard is recognized (finally) and I managed to make it accept a stock rom. Many other .zips fail. System says no image or wrong image when searching for them.
I suspect the phone has a wrong bootloader (?) and will only accept G2 roms (wich would not be right since its a Desire Z (?)).
Things I tried so far:
* flash a stockrom: It did do something (saw the blue "loading" bar in the bootloader). After it's done it verifies and returns to the bootloader. The I reboot but it still hangs at white screen with green letters HTC/logo
* tried to flash other roms by putting then on the SD. Gives message no image or wrong image
* tried with adb with fastboot. Nothing is accepted.
Is this phone beyond DIY repairs? Advice or tips would be greatly appreciated (since this crap costed me already a full saturday and sunday)
Many thanks in advance!
(PS: I should have the basic knowledge about rooting, adb and such. Also I rooted my own desire Z succesfully already)
use THIS RUU directions will be there
now DOWNGRADE AGAIN which you already know
then follow either THE XDA WIKI or THE CYANOGEN WIKI or STRAWMETALS PDF GUIDE
demkantor said:
use THIS RUU directions will be there
now DOWNGRADE AGAIN which you already know
then follow either THE XDA WIKI or THE CYANOGEN WIKI or STRAWMETALS PDF GUIDE
Click to expand...
Click to collapse
Thanks a lot for your reply!
I tried what you suggested 3 times and this is the outcome:
The program starts up fine. Checks the phone with no errors. After a few install screens the phone reboots into a black screen with silver letters HTC (same as seen with adb/fastboot I think?). It starts wiping userdata. Then it says "busy sending"; goes all fine.
The it gets to the point sending "signature" (not sure if I translate correct. I have a dutch version or at least the install was in dutch).
And after a while I get:
ERRORCODE: 130 (model-ID error)
Get right updateapplication and retry
during install it said I had image version 1.00.000.0 and asked if want to update to 2.16.531.6
Anymore advice or sugestions I could try?
Thanks in advance for your answer!
[EDIT]
Seems I can go into some kind of recovery mode (choosing recovery from menu >> gives black screen with greenish icon >> gives red triangle
at that screen I do volume + and power and it gives me a menu in wich I can choose update from SD. Not sure if that can help me in any way? Maybe there is some .zip I can install and reset everything back to factory or something?
Tried already to select something there but gives an error:
(in yellow line) E: Can't mount /cache/recovery/command
Sounds serious tome
Then you'll need the ruu for your model phone, got to HTC.com, find support, look for desire z, then find downloads, follow same steps as before
Sent from my Nexus 7 using xda premium
demkantor said:
Then you'll need the ruu for your model phone, got to HTC.com, find support, look for desire z, then find downloads, follow same steps as before
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Tried quite a lot of RUU versions but everytime the same damn message:
ERRORCODE: 130 (model-ID error)
Get right updateapplication and retry
Tried to get unlocked bootloader with the tool from HTCdev but that gave me a message ERROR[191]: ROM not supported
Anything else I can try out? (going to try and see if I can get something of a rom thru a goldcard but my hopes dwindle by the minute
Thanks in advance for any help/advice
[EDIT]
After hours and hours of reading I can only think of 2 things myself:
1. somehow the emmc is defunct (broken or totally messed up beyond flashable)
2. it has a wrong radio version (= bricked beyond DIY repairs as far as I could read)
Therefor I descided to contact a company that can JTAG the phone and restore it to its glory. What is a reasonable price for such?
If anyone else has still some tips I'll keep watch of this thread
You can't use an older version of the software/firmware so you would need the latest from HTC, if the phone already has the latest installed then you would need a gold card to change the cid. Problem is, as far as I know, you need to at least a functioning adb access to make a gold card.
Being its hard to the version that you were running the state your phone is in, my guess you are at the latest ota, so if there was a ruu that came out for it that wasn't an ota then that will probably be the only one that works. Its a long shot, but you could call HTC (don't mention rooting just say you picked up the phone at it was like this) and ask for a link to the latest ruu so you can try and fix it, even if you're past warranty they should point you in the right direction
Sent from my Nexus 7 using xda premium
demkantor said:
You can't use an older version of the software/firmware so you would need the latest from HTC, if the phone already has the latest installed then you would need a gold card to change the cid. Problem is, as far as I know, you need to at least a functioning adb access to make a gold card.
Being its hard to the version that you were running the state your phone is in, my guess you are at the latest ota, so if there was a ruu that came out for it that wasn't an ota then that will probably be the only one that works. Its a long shot, but you could call HTC (don't mention rooting just say you picked up the phone at it was like this) and ask for a link to the latest ruu so you can try and fix it, even if you're past warranty they should point you in the right direction
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Thanks a lot for your advice Demkantor
According to my friend he checked for OTA updates a few days ago (was his motivation in the first place to unroot and flash a custom since he was pissed that his great device didnt get much love anymore from updates and after seeing my Desire working on a custom hehe)
I checked out the RUU versions and also read that they kinda only work if it essentially updates the device (checked the site http://shipped-roms.com/index.php?category=android&model=Vision.
Tried a lot from there but only the WWE versions (CID of gsm was one of those numbers that indicated the gsm is unbranded)
For the sake of it I did make a goldcard and tried to use the extracted rom from an RUU. No luck. It sees it, sends it but fails at checking after that and returns to Hboot. Had a hope that the downgrade (step before perm root) was kinda succesful...
Gonna give it one last try with one of the none WWE versions with the lastest version number to see what it does.
I'll keep you posted!
PS: Damn I wished Gigabyte would make phones! I bet they'd put in some kind of recover rom in case the **** hits the fan hehe

Bricked HTC One M8

Hi
Please can anyone help please?
Got a HTC One M8 on o2. I installed a custom rom (Viper One) and used it fine for over a year.
I've since changed to a S6 edge and wanted to revert my old phone back to stock rom unrooted.
In doing so I messed up!!!
I'm now stuck with a handset, everything wiped (including the operating system and backups)
I have TWRP recovery and need to re-install stock rom.
Can anyone help?
Thank you
This section is absolutely filled with the same question.
Have a GOOD read here
http://forum.xda-developers.com/showthread.php?t=3086860
Ah right sorry, thanks... Will check it out
bah77 said:
I'm now stuck with a handset, everything wiped (including the operating system and backups)
Click to expand...
Click to collapse
If I'm understanding you correctly, you wiped the OS, not realizing it would cause your phone to be without . . . an operating system?
NO, the operating was wiped by accident
bah77 said:
NO, the operating was wiped by accident
Click to expand...
Click to collapse
Well the easiest way without going through any hassle to fix your phone and make it Stock/Like Brand New is to run a RUU.
I will explain how to do this process with a PC and you should be good to go :good:
1. Download HTC drivers for your PC if you haven't already Here, install and uninstall HTC Sync Manager while KEEPING "HTC Driver Installer".
2. Download the RUU that best matches your phone Here, you can possibly find a O2 RUU on xda but I did not find one my self for you unfortunately, otherwise if your phone is a GSM variant phone you can flash the international RUU from Here (Instructions would be different in this case)
3. Get your phone into bootloader by TWRP or if your phone is off then hold down VOL DOWN and POWER BUTTON at the same time until HBOOT shows up.
4. Plug your device via USB into the computer and verify that you see "Fastboot USB" on your phone's screen.
5. Run the RUU .exe file, I recommend you "Run as Administrator".
6. Follow the on screen instructions and sit back 10-20 minutes as your phone becomes brand new, do not interupt the process or you could have a permanent phone brick.
bah77 said:
Ah right sorry, thanks... Will check it out
Click to expand...
Click to collapse
Is your problem fixed ? Do you still need a RUU for this ? Or the TWRP backup that you found in that link is good enough ?
Sorry not had time to try yet but hoping to in the next day or two
Thanks for the help guys, will let you know how i get on
bah77 said:
wanted to revert my old phone back to stock rom unrooted.
In doing so I messed up!!!
I'm now stuck with a handset, everything wiped (including the operating system and backups)
I have TWRP recovery and need to re-install stock rom.
Click to expand...
Click to collapse
Seems (from the vague description) that a few things went wrong:
1) You may have been proceeding without the proper knowledge of how to return to stock, and at least somewhat, "making it up" as you went along or "experimenting". This is not the proper way to go about things when modding (or in this case "unmodding") a phone. Stick to specific instructions and guides, as already pointed out the process to return to stock is well documented.
2) No degree of wiping or factory resets is going to restore a stock ROM, if you have a custom ROM installed (if that is what you were trying to do); which is a somewhat common misconception. Also, wiping things without understanding the result is a bad idea. The Wipe options are called "Advanced" for a reason. If you don't understand what it is (or the results of wiping it) than don't do it.
The process to return to working stock has been outlined by others. But if you want more specific help, you will need to do a getvar all and post the output (being sure to delete your IMEI and serial number, as those are personal info) so we can better determine the way forward. But in summary, you have 2 choices:
a) Relock the bootloader and run the proper RUU, of one exists for your CID version.
b) Restore the stock nandroid that corresponds to your CID and main version (firmware), then flash the correct corresponding stock recovery.
Been stuck like this for 40 minutes
bah77 said:
Been stuck like this for 40 minutes
Click to expand...
Click to collapse
What did you do ?
Do you have right RUU ? Can you give the RUU name that you are using ?
I saw you use a ROM.zip .. AFAIK your O2 RUU is an exe file.
You also need USB 2.0 and latest HTC USB Drivers installed.
Do i need to re lock the bootloader first?
Discussion has resumes here:
http://forum.xda-developers.com/htc-one-m8/help/htc-one-m8-brick-t3243115
Thread closed.

Categories

Resources