Hi all,
in hardware information writes that RAM memory is 512 MB, but in task manager max memory (used + free) is 365 MB.
where is the rest 147 MB, where they are used ?
Regards!
Dimitar G said:
Hi all,
in hardware information writes that RAM memory is 512 MB, but in task manager max memory (used + free) is 365 MB.
where is the rest 147 MB, where they are used ?
Regards!
Click to expand...
Click to collapse
don't you know to search?
http://forum.xda-developers.com/showthread.php?t=1671022
Thanks !
Related
I have just upgraded my HTC 620 to WM6.
All is good but running low on RAM / Memory / Storage and I am a little confused about which is which.
Nothing running in Task Manager...All of the other applications installed on storeage card....
After a restart it shows
Available Storage - 28.96 mb
Total Storage - 58.11 mb
Available Memory - 14.16 mb
Total Memory - 43.56 mb
The System information for the device says
RAM 64mb
FLASH 128 mb
Any suggestions to easily find our what is taking up the memory and space.
Thanks in advance....
gigglepot said:
I have just upgraded my HTC 620 to WM6.
All is good but running low on RAM / Memory / Storage and I am a little confused about which is which.
Nothing running in Task Manager...All of the other applications installed on storeage card....
After a restart it shows
Available Storage - 28.96 mb
Total Storage - 58.11 mb
Available Memory - 14.16 mb
Total Memory - 43.56 mb
The System information for the device says
RAM 64mb
FLASH 128 mb
Any suggestions to easily find our what is taking up the memory and space.
Thanks in advance....
Click to expand...
Click to collapse
i am getting the same thing....still haven't figured it out...
Hi all
Is there any way to relocate a part or the all Storage Memory to Program memory on the Universal?
No. They are two different modules now(RAM and ROM)
Ok If I'm not in error the Universal have 64MB RAM is it? Why then there are only aroynd 50 visible in windows? 14MB are missing somewhere? Is this missing space used for the Page pool? And fot it only or are there other thing running there?
OrionBG said:
Ok If I'm not in error the Universal have 64MB RAM is it? Why then there are only aroynd 50 visible in windows? 14MB are missing somewhere? Is this missing space used for the Page pool? And fot it only or are there other thing running there?
Click to expand...
Click to collapse
mainly pagepool
Is this Pagepool sometning like the swap file in Windows?
And teoretically specking can the pagepool be moved to elsewere? Let's say empty Extrom?
before i begin, i would like to know from us, how many program memory's left in our devices?
I have the last Bepe's ROM (0.97 Premium) installed, and some small programs on the intern main memory, they don't really use so much space and i don't think they are the reason of my memory lack, my program memory shows only 22,1 MB memory free, what about your own values...?
What can be the reason for having so a memory problem
I have noticed that most of the ROM developers don't include detailed information about the memory use of their ROMs.
usual values:
after a restart: 37 MB
by using TF3D: 28,86 MB
by using TF3D and some programs: 22 MB
Since you have the Diamond with 4Gb of Internal Memory, why not use it to install the programs?
The speed difference is barely noticiable and you will get more out of the machine memory.
Nevertheless make sure that you are not running some programs in the background. Try to make a soft reset and check how much memory you have immediately after the restart of the mobile. This is the maximum memory you will have.
lmbranco said:
Since you have the Diamond with 4Gb of Internal Memory, why not use it to install the programs?
The speed difference is barely noticiable and you will get more out of the machine memory.
Nevertheless make sure that you are not running some programs in the background. Try to make a soft reset and check how much memory you have immediately after the restart of the mobile. This is the maximum memory you will have.
Click to expand...
Click to collapse
the 2 Programs installed on the main memory are not bigger that 900 Kb, it could not be that problem how i've said it before. After 2 restarts i obtained 37 MB, but i mean is still to slow....!!!!
Any ideas, about what can i do without to reflash again my device..??
THX
Are you running TouchFlo3D?
This is what is in Bepe's description of his Rom. As you can see without TouchFlo3D you have "only" 64Mb, since TouchFlo3D takes around 25Mb, this goes to the 37Mb you have.
Code:
# Premium Edition boot up memory
* RAM: 64.28 MB
* Storage: 115.92 MB
That is without activating TouchFLO 3D
My suggestion, try another Rom, Dutty's V1.5 is great, or check if Bepe has a more recent one.
lmbranco said:
Are you running TouchFlo3D?
This is what is in Bepe's description of his Rom. As you can see without TouchFlo3D you have "only" 64Mb, since TouchFlo3D takes around 25Mb, this goes to the 37Mb you have.
Code:
# Premium Edition boot up memory
* RAM: 64.28 MB
* Storage: 115.92 MB
That is without activating TouchFLO 3D
My suggestion, try another Rom, Dutty's V1.5 is great, or check if Bepe has a more recent one.
Click to expand...
Click to collapse
I'm running TF3D but the memory values never arrive the 40 MB, just 37 MB by the restart, but it drops immediately to 26 MB when i scroll around the TF3D surface.
Actually I'm using BEPE's ROM because he released a GER version of the ROM, i was thinking to try with an original HTC ROM, but I'm not sure if i do it by now (reason time)
he say that , if you want to free some memory, you need to DESACTIVATE COMPLETELY TouchFlo3D ... without that, you can't have more free memory available.
hey guys...
I use BEPE's ROM version 0.97 Premium GER, too.
I've got no Problems with memory since flashing...
My Diamond runs now for a few hours, TF3D, ActiveSync and little tools are running and i received some mails and worked with it.
I've got TT7 and some little tools on "my device" installed.
After scrolling trought all Tabs of TF3D I already have...
78mb free file storage (Datenspeicher) of 122,91mb
41,84mb free ram (Programmspeicher) of 111,36mb
Everything runs fine and much better than the original old O² ROM
Jason
on swiftbl 5.0 rom I have 57meg free, ver nice,fast rom
if u have also tweaked your device that will also cost you memory data. If u tweaked the file cache and also other tweaks that are above 2 MB you have to add them also with the totaal used memory because the tweak uses the program memory so therfore always concider that in mind and also any tweak with cahe files !!
hi,
my kitchen is based on Anryls WM6.1 - 19212 German Kitchen
the problem i got on my manila ROM (its a BS) is the RAM or Program storage,
when i put a SD in the slot i loose 9% of program storage
(program storage with no SD is 24,69 MB / with SD 20,56 MB or less)
so how can i fix this in my kitchen ? need minimum 22 MB with Storage card !
i need some registry settings or else that can help me, plz
greetz
Sorata4u
When a device has a storage card inserted, it'll always consume more RAM however, that's a bit too much. As a work-around, have you tried changing the pagepool to help increase the RAM?
no, PP is always on 4 MB in my ROMs, but now i had turn off my OEM Pack "Storage Manager Settings" from Starbas64 Big OEM package release this do not work well to the RAM of my ROMs. I had try without this, now it is with no SD at 23-24 MB and with SD on 22 MB after 1st boot, after i add my apps i used my hermes more then 8 h i got with SD card 20,78 (i used in this time : W.V.D., youtubeplay, TCPMP and some other apps), i think for a manila2d ROM with BS (thx to joshkoss for the BS-NonBS pack) its ok or is there something else to do to get more RAM ? i think i was too sleepy at that time, 36h i worked on this for my final release
Sorata4u said:
no, PP is always on 4 MB in my ROMs, but now i had turn off my OEM Pack "Storage Manager Settings" from Starbas64 Big OEM package release this do not work well to the RAM of my ROMs. I had try without this, now it is with no SD at 23-24 MB and with SD on 22 MB after 1st boot, after i add my apps i used my hermes more then 8 h i got with SD card 20,78 (i used in this time : W.V.D., youtubeplay, TCPMP and some other apps), i think for a manila2d ROM with BS (thx to joshkoss for the BS-NonBS pack) its ok or is there something else to do to get more RAM ? i think i was too sleepy at that time, 36h i worked on this for my final release
Click to expand...
Click to collapse
try removing office and you might have a little more ram.. also be sure bluetooth audio gateway's are turned off.
can you try
using my boot RGU from my xip for 21109 attached here. and if that has same also try xip for 21109 attached
joshkoss said:
using my boot RGU from my xip for 21109 attached here. and if that has same also try xip for 21109 attached
Click to expand...
Click to collapse
ok i try it later today, thx
do u mean the 21109_XIP 1-18-09 from ur kitchen thread, i'm right?
EDIT: i used "Change Rominfo On first Flash screen" from ur tools but "by josh" is no changing to by S4 -_-'
you can get rid of IrDA and others, too:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Carkit]
"Flags"=dword:4
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\IrCOMM]
"Flags"=dword:4
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SerialIR]
"Flags"=dword:4
and then you can play with cache settings in boot.rgu...
Next thing is to make some XIP modules from regular exe, dll and mui files - it can really give you some significant amounts of RAM.
@josh
had used ur xip 21109 and ur bs files works great(dont removed office and onenote but HTC Opal vol control and large titlebar[+3 MB RAM] ),after first boot free programm storage is with no SD in slot 24 MB and with SD 23,xx MB, internal data storage is at 39 MB, thx
changing the ROM-Info on first bootscreen works now
greetz
Sorata4u
Edit: after i used my device 4h (install apps &co.) free program storage is a bit lower than 23 MB it is 22,73 MB, add extra oxios memory if i need more RAM
Sorata4u said:
@josh
had used ur xip 21109 and ur bs files works great(dont removed office and onenote but HTC Opal vol control and large titlebar[+3 MB RAM] ),after first boot free programm storage is with no SD in slot 24 MB and with SD 23,xx MB, internal data storage is at 39 MB, thx
changing the ROM-Info on first bootscreen works now
greetz
Sorata4u
Edit: after i used my device 4h (install apps &co.) free program storage is a bit lower than 23 MB it is 22,73 MB, add extra oxios memory if i need more RAM
Click to expand...
Click to collapse
Excellent sir!! congrats!!
hi all i see this program and i would to try to swap....there is a kernel that support swap file? i've swapped de internal with external sd....there is the possibility to use the 1.7gb memory for ram swapp??? there are real advantage from this? thank's to all :laugh:
refer to this http://forum.xda-developers.com/showthread.php?t=1722144