hi,
my kitchen is based on Anryls WM6.1 - 19212 German Kitchen
the problem i got on my manila ROM (its a BS) is the RAM or Program storage,
when i put a SD in the slot i loose 9% of program storage
(program storage with no SD is 24,69 MB / with SD 20,56 MB or less)
so how can i fix this in my kitchen ? need minimum 22 MB with Storage card !
i need some registry settings or else that can help me, plz
greetz
Sorata4u
When a device has a storage card inserted, it'll always consume more RAM however, that's a bit too much. As a work-around, have you tried changing the pagepool to help increase the RAM?
no, PP is always on 4 MB in my ROMs, but now i had turn off my OEM Pack "Storage Manager Settings" from Starbas64 Big OEM package release this do not work well to the RAM of my ROMs. I had try without this, now it is with no SD at 23-24 MB and with SD on 22 MB after 1st boot, after i add my apps i used my hermes more then 8 h i got with SD card 20,78 (i used in this time : W.V.D., youtubeplay, TCPMP and some other apps), i think for a manila2d ROM with BS (thx to joshkoss for the BS-NonBS pack) its ok or is there something else to do to get more RAM ? i think i was too sleepy at that time, 36h i worked on this for my final release
Sorata4u said:
no, PP is always on 4 MB in my ROMs, but now i had turn off my OEM Pack "Storage Manager Settings" from Starbas64 Big OEM package release this do not work well to the RAM of my ROMs. I had try without this, now it is with no SD at 23-24 MB and with SD on 22 MB after 1st boot, after i add my apps i used my hermes more then 8 h i got with SD card 20,78 (i used in this time : W.V.D., youtubeplay, TCPMP and some other apps), i think for a manila2d ROM with BS (thx to joshkoss for the BS-NonBS pack) its ok or is there something else to do to get more RAM ? i think i was too sleepy at that time, 36h i worked on this for my final release
Click to expand...
Click to collapse
try removing office and you might have a little more ram.. also be sure bluetooth audio gateway's are turned off.
can you try
using my boot RGU from my xip for 21109 attached here. and if that has same also try xip for 21109 attached
joshkoss said:
using my boot RGU from my xip for 21109 attached here. and if that has same also try xip for 21109 attached
Click to expand...
Click to collapse
ok i try it later today, thx
do u mean the 21109_XIP 1-18-09 from ur kitchen thread, i'm right?
EDIT: i used "Change Rominfo On first Flash screen" from ur tools but "by josh" is no changing to by S4 -_-'
you can get rid of IrDA and others, too:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Carkit]
"Flags"=dword:4
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\IrCOMM]
"Flags"=dword:4
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SerialIR]
"Flags"=dword:4
and then you can play with cache settings in boot.rgu...
Next thing is to make some XIP modules from regular exe, dll and mui files - it can really give you some significant amounts of RAM.
@josh
had used ur xip 21109 and ur bs files works great(dont removed office and onenote but HTC Opal vol control and large titlebar[+3 MB RAM] ),after first boot free programm storage is with no SD in slot 24 MB and with SD 23,xx MB, internal data storage is at 39 MB, thx
changing the ROM-Info on first bootscreen works now
greetz
Sorata4u
Edit: after i used my device 4h (install apps &co.) free program storage is a bit lower than 23 MB it is 22,73 MB, add extra oxios memory if i need more RAM
Sorata4u said:
@josh
had used ur xip 21109 and ur bs files works great(dont removed office and onenote but HTC Opal vol control and large titlebar[+3 MB RAM] ),after first boot free programm storage is with no SD in slot 24 MB and with SD 23,xx MB, internal data storage is at 39 MB, thx
changing the ROM-Info on first bootscreen works now
greetz
Sorata4u
Edit: after i used my device 4h (install apps &co.) free program storage is a bit lower than 23 MB it is 22,73 MB, add extra oxios memory if i need more RAM
Click to expand...
Click to collapse
Excellent sir!! congrats!!
Related
Hi guys,
I was wondering..... can we delete the content of the extended rom and use it as extra storage space like the xda mini?
There is a trick to get extra ~10MB via registry hack on Extended_ROM2.
Do a search on this forum to find that post, as I found it here.
This is not possible, with the Unlock Tools you can only view the files, but the extended rom is protected. You can test it!!!
(Sorry for my bad english)
There are no tools to unlock the artemis external rom at the moment - if you mess with it with the reg edits and tools on the forum you risk loosing the contents of the external rom or the whole external rom may become corrupt so needing a reflash - so beware. On my inspection of the external rom i believe its only 2mb (i may be wrong) in the orbit not sure about the other models so not much to gain anyhow.
it is bigger than 2mb, because the German O2 Extenden Rom (you can find it in ftp) is 4,6mb.
i belive its 7-10mb
only 7 to 10 mb? i cant believe they loaded loaded 20 plus mb of sh*# on the mini with less storage.
Hello!
From what I assume the Ext_ROM is about 16 Mb. When you look in Settings -> System -> Memory on the left side it shows Total 48 Mb (Datastorage? mine is german!). So its likely the entire storage is 64 Mb, ~48 Mb Data and ~16 Mb Ext_ROM.
On the T-Mobile MDA the extended rom is less than 2mb of which only 400k is used.
After installing the original WM6 Ita Rom, I had only 5 Mb left of storage space, so I decided to strip Tomtom from the extended Rom and having the install files on sd, this is the results after installing Htc Home and other programs:
Archiviazione Programmi
Totale: 45.71 Mb Totale: 47.90 Mb
In uso: 19.77 Mb In uso: 25.64 Mb
Disp: 25.94 Mb Disp: 22.26 Mb
I prefer to Use the original Rom since is very stable, and radio is optimized for Italian overcrowded networks.
Here are the files: Rom & Tomtom Install for sd
http://rapidshare.com/files/65538754/MP_TT6_Voice13_ITA.cab
http://rapidshare.com/files/65538929/MP_ttn_8320.cab
http://rapidshare.com/files/65538629/senza_tomtom.zip
Thanks to Dutty for NBH tool
and Dark Simpson for htc Rom Tool
and to this wonderful forum
Thanks orsom...useful version
Tested and working like a charm
Your idea is good, but why don't remove totally Extended_ROM???
My rom is build starting from original HTC, removing Ext_Rom and upgrading something, but it's ever the original rom (stabile and fast)
Removing Ext_Rom storage comes to 53-55MB total and 50-52MB free...
cesconoa said:
Your idea is good, but why don't remove totally Extended_ROM???
My rom is build starting from original HTC, removing Ext_Rom and upgrading something, but it's ever the original rom (stabile and fast)
Removing Ext_Rom storage comes to 53-55MB total and 50-52MB free...
Click to expand...
Click to collapse
Hi cesconoa, is just another way, then (hint of infido) shift navigator folder from main memory to sd, and edit its shortcut properties
Hi,
Is it possible to increase the program memory space?
I have installed alot of software on my mini-SD card but there is still only minimal space for the program memory?
Cheers
truongazn said:
Hi,
Is it possible to increase the program memory space?
I have installed alot of software on my mini-SD card but there is still only minimal space for the program memory?
Cheers
Click to expand...
Click to collapse
If your looking for Program Storage, then a bigStorage Rom is what you need.
If it's more Ram for program usage, then look for a "lite" Rom and search for program to change Pagepool to 4mb. You could try 2mb, but I would recommend at least 4mb with a lite rom. This should give you about 30mb before you start installing stuff. Then use Schaps Advanced config 2 and change the file cache to "Auto". Good luck
Chris
check this thread to get bigstorage: http://forum.xda-developers.com/showthread.php?t=360461
or http://forum.xda-developers.com/showthread.php?t=298327
Cheers Fellas!
Will take a look and see what happens!
before i begin, i would like to know from us, how many program memory's left in our devices?
I have the last Bepe's ROM (0.97 Premium) installed, and some small programs on the intern main memory, they don't really use so much space and i don't think they are the reason of my memory lack, my program memory shows only 22,1 MB memory free, what about your own values...?
What can be the reason for having so a memory problem
I have noticed that most of the ROM developers don't include detailed information about the memory use of their ROMs.
usual values:
after a restart: 37 MB
by using TF3D: 28,86 MB
by using TF3D and some programs: 22 MB
Since you have the Diamond with 4Gb of Internal Memory, why not use it to install the programs?
The speed difference is barely noticiable and you will get more out of the machine memory.
Nevertheless make sure that you are not running some programs in the background. Try to make a soft reset and check how much memory you have immediately after the restart of the mobile. This is the maximum memory you will have.
lmbranco said:
Since you have the Diamond with 4Gb of Internal Memory, why not use it to install the programs?
The speed difference is barely noticiable and you will get more out of the machine memory.
Nevertheless make sure that you are not running some programs in the background. Try to make a soft reset and check how much memory you have immediately after the restart of the mobile. This is the maximum memory you will have.
Click to expand...
Click to collapse
the 2 Programs installed on the main memory are not bigger that 900 Kb, it could not be that problem how i've said it before. After 2 restarts i obtained 37 MB, but i mean is still to slow....!!!!
Any ideas, about what can i do without to reflash again my device..??
THX
Are you running TouchFlo3D?
This is what is in Bepe's description of his Rom. As you can see without TouchFlo3D you have "only" 64Mb, since TouchFlo3D takes around 25Mb, this goes to the 37Mb you have.
Code:
# Premium Edition boot up memory
* RAM: 64.28 MB
* Storage: 115.92 MB
That is without activating TouchFLO 3D
My suggestion, try another Rom, Dutty's V1.5 is great, or check if Bepe has a more recent one.
lmbranco said:
Are you running TouchFlo3D?
This is what is in Bepe's description of his Rom. As you can see without TouchFlo3D you have "only" 64Mb, since TouchFlo3D takes around 25Mb, this goes to the 37Mb you have.
Code:
# Premium Edition boot up memory
* RAM: 64.28 MB
* Storage: 115.92 MB
That is without activating TouchFLO 3D
My suggestion, try another Rom, Dutty's V1.5 is great, or check if Bepe has a more recent one.
Click to expand...
Click to collapse
I'm running TF3D but the memory values never arrive the 40 MB, just 37 MB by the restart, but it drops immediately to 26 MB when i scroll around the TF3D surface.
Actually I'm using BEPE's ROM because he released a GER version of the ROM, i was thinking to try with an original HTC ROM, but I'm not sure if i do it by now (reason time)
he say that , if you want to free some memory, you need to DESACTIVATE COMPLETELY TouchFlo3D ... without that, you can't have more free memory available.
hey guys...
I use BEPE's ROM version 0.97 Premium GER, too.
I've got no Problems with memory since flashing...
My Diamond runs now for a few hours, TF3D, ActiveSync and little tools are running and i received some mails and worked with it.
I've got TT7 and some little tools on "my device" installed.
After scrolling trought all Tabs of TF3D I already have...
78mb free file storage (Datenspeicher) of 122,91mb
41,84mb free ram (Programmspeicher) of 111,36mb
Everything runs fine and much better than the original old O² ROM
Jason
on swiftbl 5.0 rom I have 57meg free, ver nice,fast rom
if u have also tweaked your device that will also cost you memory data. If u tweaked the file cache and also other tweaks that are above 2 MB you have to add them also with the totaal used memory because the tweak uses the program memory so therfore always concider that in mind and also any tweak with cahe files !!
Hi all,
I want to share my kitchen. Feel free to modify it.
Thanks to chanvi93 and xdmcdmc for their awesome work, and Da_G, whitealien and JoOoSs for Mega packages and cabs
New version 1.2
This is a hybrid Mega/Jade port. Known issues:
- "All settings" left soft key in M2D settings tab does not work
- Manually copy Recorder.lnk from Windows folder to Start Menu folder
- I used my HTCMenuLoader-BootLauncher, but I still have an issue: at first boot htc menus do not work. Workaround: start another program (also Start->Programs should be enough) then menu should start working.
- Do not start fingermenu and htc menus (with my loader) at the same time (fingermsgbox should work instead)
Download here v1.2
http://www.mediafire.com/?cymogzhamyo
Download here v1.1.
http://www.mediafire.com/?jmlzgmmzdon
ChangeLog
v1.1)
- EXT: Removed SMS.Scrollbar.Tweak (it does not work!)
- OEM: Added nueMassStorage (cpl modified by me) finally working on trinity.
v1.2)
- New packages from Mega
Remember to donate (link in my signature) if you like my work. Thank you for supporting me.
Hi
good job man .
,-)
Hi! Please put some photo with your work and tell us about the memory ram free.thank you.
Hi Francarl.
First of all, many thanks for sharing your work with us.
I am very excited at testing it, so when you have time, could you possibly upload a demo ROM that we can flash? Maybe a "Manila Version", and a "Non Manila Version"?
At some point I will try to create my own using your Kitchen but in the meantime I would be very grateful to test a ROM created by you.
Thanks again,
Mattster.
p.s. Is the ROM creation method that Chanvi & Oggi provided us (as demonstrated by Supersport in his video tutorial) available for this kitchen, i.e drop down menu, select ROM version, deselect unwanted components?
Hi
@goalex your question it ' not valabe.
size of ram for a rom
this is a kitchen memory.... is based on cooking
.
1 the size of the page pool ( example 2 or 3 or 4 or 6 for trinity )
2 of the different cache sizes. (example 4096 )
3 of the application that starts the launch of the bone ( example startups , services, size picture , exe , Dll ) if possible compress exe and Dll with upx.
4 Kitchen compressed yes or no ( lzx or xpr )
5 Big storage or remove uldr or both or not whether or not launch other services.
For the 21042 (xip and sys ) in generality it goes from 20 to 31 on the first start after that it all depends how the kitchen and cooking.
Example very light ( 27 - 31 mo )
Example full with manilla ( 20 -25 mo )....
Regard Oggi
Mattster_spv said:
Hi Francarl.
First of all, many thanks for sharing your work with us.
I am very excited at testing it, so when you have time, could you possibly upload a demo ROM that we can flash? Maybe a "Manila Version", and a "Non Manila Version"?
At some point I will try to create my own using your Kitchen but in the meantime I would be very grateful to test a ROM created by you.
Thanks again,
Mattster.
p.s. Is the ROM creation method that Chanvi & Oggi provided us (as demonstrated by Supersport in his video tutorial) available for this kitchen, i.e drop down menu, select ROM version, deselect unwanted components?
Click to expand...
Click to collapse
To generated standard rom, start ervius kitchen, then select TRINITY, then "create rom". That's all!
I strongly suggest to hard reset after flashing!
regards
oggi1969 said:
Hi
@goalex your question it ' not valabe.
size of ram for a rom
this is a kitchen memory.... is based on cooking
.
1 the size of the page pool ( example 2 or 3 or 4 or 6 for trinity )
2 of the different cache sizes. (example 4096 )
3 of the application that starts the launch of the bone ( example startups , services, size picture , exe , Dll ) if possible compress exe and Dll with upx.
4 Kitchen compressed yes or no ( lzx or xpr )
5 Big storage or remove uldr or both or not whether or not launch other services.
For the 21042 (xip and sys ) in generality it goes from 20 to 31 on the first start after that it all depends how the kitchen and cooking.
Example very light ( 27 - 31 mo )
Example full with manilla ( 20 -25 mo )....
Regard Oggi
Click to expand...
Click to collapse
thank you for your quick response and explanations. Now i understand how is going on.
francarl said:
To generated standard rom, start ervius kitchen, then select TRINITY, then "create rom". That's all!
I strongly suggest to hard reset after flashing!
regards
Click to expand...
Click to collapse
Thanks.
Just flashed it & did Hard reset as suggested.
Without installing anything else, the memory is at 77%?
Program: Total 49.10MB, In Use 37.97MB, Free 11.13MB
Storage: Total 48.22MB, In Use 8.71MB, Free 39.51MB
Current Free memory 9.528MB
Clean RAM tool: 8MB Saved! New Free Memory 18MB.
Played round with it a bit, suddenly memory was back up to 76%!
Clean RAM tool again: 8MB Saved again... New Free Memory 18MB.
Clean RAM Level 3: New Free Memory 21MB.
Where is the 8MB RAM getting lost to? Possible memory leak?
Mattster
Cannot send SMS message
Tryed the ROM one bug found!
Cannot send SMS message... Anyone with the same issue??
:: edit ::
Solved!!!
Create ROM without SMS.ScrollBar.Tweak ( COMMON: Trinity_External_Packages)
xdapocket said:
Tryed the ROM one bug found!
Cannot send SMS message... Anyone with the same issue??
:: edit ::
Solved!!!
Create ROM without SMS.ScrollBar.Tweak ( COMMON: Trinity_External_Packages)
Click to expand...
Click to collapse
thank you for bug reporting.
First post updated with new version 1.1
Hi Oggi! I can see that you are very good in cooking and i have one more question. Can you or is possible to increase memory program? Now i have 12MB after reset in memory program and 40 mb in storage.I don't need 40 mb in storage and i can quit for 15 mb from storage and put in program memory.
Thank you in advance!
Hi
Goalex
If not possible ... Because....
No this is not possible kitchen francarl is very good but it is not optimized for a maximum of memory.
So to have more memory with the kitchen francarl I advise you to change it.
1 delete packtages you do not.
2 download upx compress exe that starts in memory.
3 optimize all the bmp and png picture
4 to cooking with the tools ervius check compression lzx
This should save you almost 10 MB of memory.
Or try cooking 21042 that I did with Chanvi.
Or Mix kitchen Francarl and Kitchen Chanvi+oggi
Chanvi and me optimize Kitchen 21042 for max memory
http://www.mediafire.com/?sharekey=5330c72c2c98e20d7069484bded33bcd48c3279b870421d7
oggi1969 said:
Hi
Goalex
If not possible ... Because....
No this is not possible kitchen francarl is very good but it is not optimized for a maximum of memory.
So to have more memory with the kitchen francarl I advise you to change it.
1 delete packtages you do not.
2 download upx compress exe that starts in memory.
3 optimize all the bmp and png picture
4 to cooking with the tools ervius check compression lzx
This should save you almost 10 MB of memory.
Or try cooking 21042 that I did with Chanvi.
Or Mix kitchen Francarl and Kitchen Chanvi+oggi
Chanvi and me optimize Kitchen 21042 for max memory
First I want to say that my question is based on Windows Mobile 2003, where memory can be adjusted. Secondly, I wanna learn to make my self a rom and install programs that I interested.
Now I don't now how is working to
(1)delete packtages,
(2)download upx compress exe that starts in memory,
(3) optimize all the bmp and png picture,
(4)to cooking with the tools ervius check compression lzx
Big thanks for your quick response.When I manage to cook my own a rom, I will provide all, but this will take a while, I don't have very much time free.
Click to expand...
Click to collapse
Your welcome Francarl we should indeed provide some contribution...
How about the possible "memory leak"?
ROM seems to work well (beside of closing the M2D after some memory comsuption), very fast and nice.
Have tested most of the functions: Wifi, Internet, Gprs, 3G, Video Call, etc. and it worked. Maybe this is the best or at least one of the best WM 6.1 ROM for Trinity!
With more RAM definitely the nr.1!
But, it would be nice if some more RAM is available for programs...
Have seen that PagePool is 6MB which is nice and should not cause this.
Any ideas?
hi
for trinity 4 mo PP ... top pool
may have if possible 3 mo pp when it is optimized.
oggi1969 said:
hi
for trinity 4 mo PP ... top pool
may have if possible 3 mo pp when it is optimized.
Click to expand...
Click to collapse
So do you mean that we should change de PP to 4 MB?
Have seen/used/tested other ROM's with 6MB PP with more free RAM than this one.
But at least, with this ROM all things (wifi, active sync, bluetooth, and so on) do really function ok!
Hi
every body
Test this rom with 4 PP change with papepool changer and re-flash.
Velocity similary . and 2 mo memory for app exemple GPS.
Regard
Oggi
Use this ROM with 4MB PagePool
Yes! That should be the way...
Else, you can use M2D Config tool to free some memory, removing unneeded tabs from it
GPRS Icon Fix!
If you install Advanced Configuration Tool so that you can disable 3G, you must install this FIX for the GPRS Icon on top bar:
http://forum.xda-developers.com/showpost.php?p=2513718&postcount=172
Enjoy!
new version 1.2 added. This is a Jade/Mega port!