Flashing - Galaxy Ace S5830 Themes and Apps

Im new to flashing roms so i want to know full detail procedure for steps involved pre n post flashing...thanks acers
sent from my top ace

First step -
Post in right section!
sent from galaxy ace, problem?

its wrong section 'but i can try and brief you up
you need a cwm(dont know what it is)
http://forum.xda-developers.com/showthread.php?t=1168417 (try this)
and then download a rom
and press menu and power when you switch on your cell
and then wipe things said by the dev
and install "the zip from sd card"
find it the rom in sd card and install it
and reboot
you are done
hope it helps
Sam

This goes in general section.
First read through the stickys
Second read some more
Still lost? Use the search.
In general: root your phone, install cwm recovery, MAKE A BACKUP with cwm recovery, choose a rom, put in SD card, go to recovery, wipe cache/data/factory reset, apply zip from SD card, select your rom (this is called flashing), wait and pray, wipe everything again, reboot.
Recommended you get titanium backup to backup your apps and their data beforehand.

Related

[Q] Newb question: How do you flash custom ROMS

I rooted my EVO running stock Froyo last night with Unrevoked 3.2. It worked flawlessly and phone is experiencing no problems. Now i'm all excited to run the custom ROMS but kind of confused as how the flashing of the custom ROMS works. Do I have to wipe out the entire contents of my SD card everytime I want to run a custom ROM? I only have the 8gig card. I was under the assumption that I could save my current stock setup and download and flash into a custom ROM and revert back to the stock rooted setup when I wanted. I downloaded a program called ROM Manager v2.0.2.6 but unsure how to use it. Looks like a 1-click solution to loading custom ROMs but I dont want it to wipe out my phone. Can someone please help me to understand the steps to take to load a custom ROM? I was thinking of trying out Fresh or something similar which still has HTC Sense in it. Feel free to message me on here. Thanks in advance.....
lostsoul1977 said:
Do I have to wipe out the entire contents of my SD card everytime I want to run a custom ROM?
Click to expand...
Click to collapse
No.
I'm not sure about using ROM manager, perhaps somebody else can help with that.
The process is simple...
Connect your EVO to your PC and enable disk drive.
Transfer the ROM zip to the root of your sd card (if your computer mounts as drive F: ... just transfer to F:\)
Eject/disable disk drive
Boot into recovery (turn device off, hold volume down and power button at same time until you see your hboot screen, choose recovery)
Perform a nandroid backup (just in case you need to get back to where you are)
Perform wipe
Use recovery option to flash zip from sdcard
Select the ROM zip
Those are the quick and dirty instructions, I'm a newb with this stuff, I've had my EVO for 2 weeks and I've not had a single problem. I had CM6 on it and I just flashed Fresh 3.2 to test that out and test 4G this weekend.
I would advise doing a Nandroid backup of your current setup. Then go the development section and choose a rom that suits you. Each developer normally will tell you how to go about flashing there rom.
Basically you would need to go into recovery and choose the flash from zip...
ok first no you dont have to erase your sd card every time you flash a rom.
you should however do a factory dalvik and cache wipe. this will erase all settings yuo previously had and will uninstall all apps.
to combat this you can use programs like Titanium back up to back up all your apps. (system settings are not recommended to be blind restored as they can cause issues between roms)
You can also make a back up of your stock rom you have now to do this through rom manager simply make sure you have the latest clockwork recovery flashed (very top button in rom manager) then go down to where it says back up rom click it and it will do the rest. This is recommended before you do anything.
once you ahve your nand back up (the back up through rom manager) and have your apps backed up through something like titanium back up. place the rom yuo want to flash on your sd card and follow these steps.
boot into recovery (either through rom manager or by powering down the phone and then holding vol down and power until it launches the boot loader and select recovery)
select wipe data/factory reset
select wipe cache partition
Select install zip from sd
select choose zip rom sd
scroll to and select the rom you moved to the sd card
select yes and let it do its thing once done select reboot phone.
It will take a little extra time the first time it boots up vs normal jsut let it sit and it should after a while boot into the custom rom.
or follow link
http://lmgtfy.com/?q=How+do+you+flash+a+custom+rom+on+an+evo
video assistance
Thanks everyone! I'm running titanium backup at the moment and backing up the entire system. I had ROM Manager do a backup of my stock ROM last night, so I think i'm good. ROM Manager also downloads ROMs for me and sets them to load at boot up. Most of the ROMS suggest doing a full wipe?
a full wipe jsut means factory/data cache and dalvik which is basically wiping all info on the phone itself. the sd card however doesnt need to be wiped
i installed baked1.7 and all loaded smoothly. I'm assuming I now have to re-download titanium backup to restore my apps and all?
Also, i'm finding no info on how to load the wimax update and the htc radio update files and the custom kernels for baked1.7
lostsoul1977 said:
Also, i'm finding no info on how to load the wimax update and the htc radio update files for baked1.7
Click to expand...
Click to collapse
Load those updates onto the root of your sd card. Get quickboot from the market to easily boot into recovery mode. Or you can power off, then hold vol down while powering on to get into bootloader and select recovery. Flash zip file and select those files. Reboot and your wimax/radio should be updated.

Noob needs Help??????

Hey all,
I have a new HTC Evo that I installed Unrevoked 3 root program....no problems installing it.....So I downloaded and installer ROM manager and then ROM manger premium.....no problem there either, backed up the phone and everything seems to be good......tried to add Rom's in zip file from SD card and keep coming up with Abort errors.....clockwork is running fine to my knowledge...
read a few threads and add in Unrevoked forever....Installed with no problems....but I still can't get any Rom's to run properly with the abort errors.....
does the SD card file have to be a certain type of file name???? and thing would be a huge help.....I am pretty sure all the software is working good.......I just can't get this to work.....I have been test it with a few different ROM'S......AND STILL NO LUCK
Thanks in advance..........
i would check to see if the file didnt accidentaly got renamed with double .zip.zip at the end. also make sure there are no spaces in the name, redownload the rom with pc not rom manager, put it in the root of sd card, go into recovery manuallly, wipe and try to flash
so root of the SD card meaning not in another file.....just drag it over to the card itself in its own file??? I downloaded the ROM originally from this website....a few different ones and no luck....
yes all you do download then drag and drop to the sd card not inside any folder, do the wipes(if using clockwork recovery wipe data, cache and the go to advance and wipe dalvik cache also) then go to flash zip from sd card, look for your zip and select it wait then reboot, first time will take a while 5 to 10 minutes is reasonable, then once booted let it settle for a couple of minutes, go thru the setup process and reboot again to finish settling everything. make sure you have a full battery in case you run into any issues you dont want your phone dying while flashing anything
Do yourself a favor and get Amon Ra recovery and stop using ROM Manager.
Get amon RA 2.3 recovery and then start flashing roms via recovery instead of rom manager. To get to recovery u can one...power off phone and hold down volume down button and press power, two...after installing a custom rom and then hold power down and select reboot alot of the roms have the option to reboot into recovery, or three...download quickboot from market and use that to reboot into recovery. Once there u can wipe parts of ur phone and also flash roms and mods and u can put the roms or mods anywhere on ur SD card. Also don't forget to make a new nandroid and a single nandroid of ur wimax keys
Ok,
So I installed amon RA 2.3 recovery ....everything went fine, Now my screens are green instead of the orange like they were....my super user icon went from ninja to skull and crossbones....and I also downloaded quickboot from the market................ and made a nandroid backup
So I went in to recovery, selected the option for zip on SD card, selected file and looks like it went with no errors.....rebooted my phone and nothing.....the rom was for a green clock app......the phone just looks stock trim
Awelshhooligan said:
Ok,
So I installed amon RA 2.3 recovery ....everything went fine, Now my screens are green instead of the orange like they were....my super user icon went from ninja to skull and crossbones....and I also downloaded quickboot from the market................ and made a nandroid backup
So I went in to recovery, selected the option for zip on SD card, selected file and looks like it went with no errors.....rebooted my phone and nothing.....the rom was for a green clock app......the phone just looks stock trim
Click to expand...
Click to collapse
Those mods can be tricky. Open the modded zip up on ur computer and see the name of the app. U can do the same thing with ur phone if u dl astro or file exployer or root exployer from the market. Go to system then apps and find that app and delete it. The try reflashing the mod via recovery. Uve done everything right its just some apps don't change for some reason
Also don't forget to wipe dalvik cache and cache before and after flashing something
The other thing is that some user made mods use the original framework.res which will change the way your phone is themed or how it "looks"
Golden rules:
1. Always do a nandroid backup before making big changes to your device.
2. Always wipe cache & dalvik manually from within recovery BEFORE flashing any mods.
3. Make sure the mod you are flashing is designed to be used with the particular rom you have installed. All mods are NOT compatible with all roms.
4. If you've screwed up and had not made a nandroid backup before screwing up, go into recovery, wipe EVERYTHING in the wipe menu EXCEPT the SD card and start over.
posting & replying via the XDA Premium app.

[Q] Error When Trying to Flash new Rom

I have Full Root to my phone and am trying to flash new roms. I have tried Rom Manager App and Recovery Boot Process and neither works. I get an error than zip file is bad. I have android Version 2.2
Software #3.70.651.1
When I use ROM Manager and Flash Clockwork Mod, It's says HTC Evo (CDMA). Does the CDMA version stop me from flashing Mods?
PLEASE HELP...
Don't use Rom Manager to flash. If you've tried flashing manually through recovery and you still get errors, try Amon Ra. You can flash it through Rom Manager. Go into Amon Ra, go ahead and do a nandroid backup as backups made with ClockworkMod won't work with Ra, then wipe and flash.
Also, what is the exact error you're getting? And no, CDMA has nothing to do with it.
(from... Evo/MIUI/Tapatalk)
I did a ROM Backup on ROM Manager. How do I do a Nandroid Backup? and How do I use Amon Ra? Sorry for being totally ignorant to these facts, but I am a complete newbie at this.
The new clockword can't flash certain roms because the scripting has changed. The best way to do it is going to be this way. Open up rom manager, scroll down to the bottom where it says "flash alternate recovery" then click the flash button for amon ra 2.3.. After the has completed reboot into recovery. (turn phone off then hold power and volume down, then select recovery) that will take you to amons recovery. Go to to the backup/restore menu (using the volume keys to navigate, and power button to press "enter" then click then perform a nandroid backup. I would select everything but android secure and sd-card ext. (they take up tons of space) then you will have succesfuly performed a backup of your current setup. I would get used to doing all your flashing through recovery, its much more stable. (recovery is the menu u were just in to perform the backup) Put the zip file of your rom you want to flash on the root of your sd card (not in a folder) Go back into recovery, enter the wipe menu, at least wipe data/factory reset, cache, and dalvik cache. Then go to install zip from sd card, select your rom zip, and click flash, it will then flash the rom for you. hope this helps
corey140 said:
I did a ROM Backup on ROM Manager. How do I do a Nandroid Backup? and How do I use Amon Ra? Sorry for being totally ignorant to these facts, but I am a complete newbie at this.
Click to expand...
Click to collapse
Before starting, try to have at least 50% battery and have the rom on the root of your SD card - not in any folders.
The backup you did in Rom Manager is the same as a nandroid backup. If you've already "flashed alternate recovery" in Rom Manager, then power the phone down. Hold down the volume down button and power button at the same time until the phone turns on to a white screen with skating Androids. This is the bootloader/hboot. Check the top and make sure it says ship s-off at the top (if it says s-on then you aren't fully rooted). Assuming you're s-off, use the volume buttons to move up/down the menu. Highlight the option that says "recovery", then press the power button to choose it. Your phone will show the white HTC Evo screen then boot to recovery. From there (using the volume and power buttons like you did before), choose backup/restore, then nandroid backup. Leave the first three options checked then do your backup. When that finishes, go ahead and backup your wimax. Go to the nandroid backup screen, uncheck the first three options with the power button, then check only wimax. Do the backup again. Then go to the wipe menu. Wipe everything in the list except the SD card. When that's finished, go back, then install zip from SD card. Choose zip from SD card, then use the volume up button to go all the way to the bottom. Highlight the rom you want to flash and press the power button. Confirm with the power button, then let it flash. Then reboot.
(from... Evo/MIUI/Tapatalk)
I really appreciate the help plainjane & jeffm922? Two last questions, hopefully. I am trying this just after rooting my phone about a week ago. I keep seeing things about radios and wimax and kernels, and gingerbread, and other stuff I never heard of...LOL. 1st Question, do I need to download a certain type of radio or wimax or kernels for certain roms??? and 2nd Question, with me only having Version 2.2,which I gues is Froyo, do I only have the capabilities to download Roms for Froyo or doest that change depending on what Rom I install? SORRY AGAIN FOR MY IGNORANCE ON THE MATTER, BUT I'll NEVER KNOW UNLESS I ASK.
THANKS In ADVANCE
corey140 said:
I really appreciate the help plainjane & jeffm922? Two last questions, hopefully. I am trying this just after rooting my phone about a week ago. I keep seeing things about radios and wimax and kernels, and gingerbread, and other stuff I never heard of...LOL. 1st Question, do I need to download a certain type of radio or wimax or kernels for certain roms??? and 2nd Question, with me only having Version 2.2,which I gues is Froyo, do I only have the capabilities to download Roms for Froyo or doest that change depending on what Rom I install? SORRY AGAIN FOR MY IGNORANCE ON THE MATTER, BUT I'll NEVER KNOW UNLESS I ASK.
THANKS In ADVANCE
Click to expand...
Click to collapse
Certain roms do require the latest radios, etc. If it does, there will be info in the directions for the rom (usually in the first couple posts). If you do need to flash a radio update, when you reboot from recovery you will see a black screen with an Android in a box or a phone with a down arrow... don't freak out and pull the battery - this screen is part of the radio update. Let it run and it will take you back to recovery when it's finished. If you do pull the battery, you will most likely brick your phone.
There are Gingerbread roms and Froyo roms - you can flash either. Just be sure to read all of the information given on the first page of the thread so you don't miss any info & always do a backup and you'll be fine.
(from... Evo/MIUI/Tapatalk)
OK tried flashing SNS v1.3.zip the exact way the instructions you gave me tell me to. It says same thing as it did when I used ROM Manager.
1. Finding update package...
2. Opening Update Package...
and then here it goes
3. Can't open /sdcard/SNS v1.3.zip
(bad)
Installation aborted
What am I doing wrong or not doing at all? I downloaded this Rom off of the following thread [ROM]UPDATE!(4/28/11) SmoothnSexy V1.3, Gingerbread-ish looking Froyo/SENSE
from this site.
Also noticed this when doing fastboot PC36DIAG.zip
Is this correct?
HAve a buddy with an evo, his is doing exacly the same thing..... helllppp
rwon said:
HAve a buddy with an evo, his is doing exacly the same thing..... helllppp
Click to expand...
Click to collapse
Do you have Amon RA Recovery. Did you install it and when you hold the power and vol- button together, you get a white screen. At the top does it say S-OFF?
If so, then proceed to go to the recovery. If it is Amon RA, it will be green. If it is the latest version of clockwork (which you don't want to use), then, it's orange.
If it's green, then wipe cache, data, boot, system, dalvik cache, sd-ext (if you have it) and then flash your ROM.
ALWAYS MAKE A BACKUP FIRST from whatever Recovery you are using. Clockword(orange lettering), does not support Edify scripting, only Amend. If you have Amon RA(green lettering), it supports both edify and amend scripting.
I did this but it says skipping Wipe od SDEXT...
Could this be the problem?
says skipping Wipe of SDEXT...
not
skipping Wipe od SDEXT...
Something else to take into consideration, your SD card may need to be re-formatted as well. Try this:
Once you have Amon-RA installed, and you are booted into it, then connect the phone to your computer via the USB cable. Navigate to USB-MS Toggle and activate it, you should now be able to copy everything from the card to your computer (re-partitioning will erase everything on the card).
After you have backed up, you can use the partition SDCard menu to repartition and reformat your card. Or you can use the Wipe menu to just format the SDCard - though I would re-partition it just to ensure the file system on the card is truly reset. If you do re-partition, use 0 for a swap (most ROMs don't use it), use anywhere from 0-500MB for the ext (this will be mostly used by app2sd, and not a requirement of the ROM, so it is optional), and the rest of your card size for the remainder (this will be partitioned as FAT32, I believe).
Once that process is complete, you can copy your ROM back over to the card (USB-MS toggle) and try again.
I had similar issues with MY Evo (using the SD card that came with it), re-partitioning it worked like a charm in clearing out all of the problems I had been experiencing. Good Luck!
BigJohn
corey140 said:
I did this but it says skipping Wipe od SDEXT...
Could this be the problem?
Click to expand...
Click to collapse
That's not the problem. You are s-off correct? I've never heard of that rom, you got it from the Evo Development forums, right? Make sure it's compatible with your phone.
I've seen this problem before, so do a search and see what the solution was.
EDIT: Do what Big John said, that sounds like a likely culprit.
(from... Evo/MIUI/Tapatalk)
corey140 said:
I did this but it says skipping Wipe od SDEXT...
Could this be the problem?
Click to expand...
Click to collapse
SDEXT is just the EXT partition on the SD card (if there is one, see my previous post). What you are seeing is recovery just telling you that this partition doesn't exist.
BigJohn
Get aman ra for sure then do it all thru recovery
Sent from my PC36100 using Tapatalk
THANKS TO EVERYONE!!! Needed to Partition SD CARD and reflash ROM...WORKING GREAT NOW!!!
glad to hear
corey140 said:
THANKS TO EVERYONE!!! Needed to Partition SD CARD and reflash ROM...WORKING GREAT NOW!!!
Click to expand...
Click to collapse
I've had the same problem you are having and I'm about to try what everyone has suggested on your post. Question though... when you partition your SD does it delete everything on the SD card? And did you partition the SD before or after what everyone suggested? Thanks!

Infinite boot Loop After Upgrading to ICS

I tried looking in the forums but I did not find my "special case".
the thing is, I first installed "ClockworkMod Recovery" and that was perfect (I even make a backup, I have it in my PC).
then I downloaded "MooDeD AOKP [AXP][][1.0][RC1][][PREM].zip" and put it in the sd card
Turn off your Xperia Arc.
enter Recovery Mode boots.
Wipe Data/Factory Rest
Selected Wipe Cache Partition
selected Wipe Dalvik Cache
Selected Mounts and Storage, selected Format System and confirm the action on the next screen.
selected Install ZIP From SD Card.
Select Choose ZIP From SD Card and locate the MooDeD AOKP [AXP][][1.0][RC1][][PREM].zip.
AROMA Installer will launch.
I made the default instalation, it rebooted and stayed on a Infinite loop...
Helpp!!!!
cant make it to recovery menu either....
Does this nott need a kernel as well, install according to op of the Rom.
I am not familiar with this Rom so not 100% sure what went wrong.
When I have used custom roms there is normally a kernel to flash as well.
Sent from my LT15i using xda premium
^^^^^^^^^^^^^^^^^^^^^^^
exactly as he said + make sure to Flash a comfortable baseband for it through Flashtools ..
there is a FULL GUIDE thread in the General forum , and It's sticked thread so yo could check it out ..
Thanks a lot for the replys,
My thing is, i can not get to the recovery mode(Power + back)
Can u send the link of the FULL GUIDE in the general forum? cant find it...
Please help.
http://forum.xda-developers.com/showthread.php?t=1653188
Pvy

[Q] Many questions (CWM, ROMs)

Hi,
I'm new here and I'd like to install a new ROM on my Gio but I want to make sure I know what I'm doing before trying something and bricking my phone. :angel:
ClockWorkMod
I installed CWM v5.2.0.6 (followed the instructions here). Is this ok, or do I need to install v5.0.2.7? And if I do need a newer version, is there a way to get an update or do I have to follow the same steps as before?
1.Download the CWM 5.0 v2 and copy to the Root (not in any folder) of your SD card
2. Put your phone in recovery Mode(press: Home button + Power button toghether)
3. In recovery mode, select the downloaded file from SD-card(Use Volume keys to navigate and home button for enter).
4. Search for the root gb updated.zip file on your SD-card
5. Run the update
6. Reboot
Click to expand...
Click to collapse
I tried creating a backup with the CWM version I have, but I get this error: "Can't mount /system".
CWM does create a folder in sdcard/ clockworkmod/ backup/ date, but it only contains the following files:
recovery.img and boot.img.
However, this post says I should actually have more files in the backup folder:
.android_secure.vfat.tar ,boot.img , cache.ext4.tar , data.ext4.tar , nandroid.md5 , recovery.img, system.ext4.tar.
Is this because of my CWM version? Or maybe because I still have the operating system that came with my device (+updates)?
What I really want to know is: can I rely on this backup, will it work?
ROMs
I want to install CM10.1.5 from here, but I have many questions and I don't really know where to look for answers. (Sorry, I really am a complete noob.)
What's the difference between androidarmv6 jenkins build and mardon build? And what's the difference between the 3 versions? Can I just install the Version with CM-Superuser and not worry about it?
Should the updates be installed via CWM - apply update from SDcard? What about the additions - CWM --> install zip from SDcard?
How can I install extras if they are "not CWM flashable"?
What happens to my apps when I install a new ROM? Do I have to install them all again? Is all data lost? Or will they all be restored from my google account and the SD card or something like that?
Finally, how can I use the ext2 partition in my SDcard to install apps? Is this function included in the ROM? Or do I need to install something else? a2sd darktremor? If yes, how (I find the instructions here confusing and overwhelming, and the post is old, so probably outdated)? Or should I use the "Link2SD" addition to the ROM?
I'm sorry for asking so much, but I'm feeling kind of lost.
Thanks in advance.
Anyone?
I've continued trying to figure things out when I have time. I'll post what I find in this thread, in case someone else comes here looking for answers to similar doubts/problems.
In trying to understand what's going on with ClockWorkMod Recovery, I found this very useful link:
wwwDOTtechbiiDOTcom / cwm-recovery-cant-mount-system-error-solution-how-to/
(sorry for the DOTs and spaces, can't post outside links yet)
CWM Recovery – Can’t Mount System Error Solution [How To]
(...)
The error is an expected one and happens generally when you are trying to backup a stock ROM using the clock work mod recovery. Please, note that you can’t do a completed nandroid backup of a stock firmwares. So, just install any custom ROM and then you can backup and restore anytime.
Click to expand...
Click to collapse
If I understood correctly, the best (only?) way to return to stock ROM is to install Odin or similar firmware flashing tool and to get the stock firmware from sites like sammobile.com and sampro.pl. However, it also says that not all firmwares might be available and I haven't looked more into it all of this yet.
Did you root your phone yet?
That should solve the problem from the can't mount system, data, etc
If you need more information, then look at this post http://forum.xda-developers.com/showthread.php?t=1397120
HerroYou said:
Did you root your phone yet?
That should solve the problem from the can't mount system, data, etc
If you need more information, then look at this post http://forum.xda-developers.com/showthread.php?t=1397120
Click to expand...
Click to collapse
Yes, I used the instructions there to root my phone and install CWM (v5.0.2.6), but that thread is 2 years old, so I'm afraid it won't be up to date in relation to certain things. For example, I did create an ext2 partition on my SD card using those instructions, but I found an easier way to move apps from my phone to the SDcard (using the link2SD app, available on Google Play). The information about ROMs is also not up to date.
If you want to install a custom rom just
-wipe data factory reset
-wipe cache partition
-advance>wipe dalvik cache
-install zip from sdcard
-reboot
NOTE: the zip is the rom
HerroYou said:
If you want to install a custom rom just
-wipe data factory reset
-wipe cache partition
-advance>wipe dalvik cache
-install zip from sdcard
-reboot
NOTE: the zip is the rom
Click to expand...
Click to collapse
Thank you.
My main concern at the moment is how to restore my original ROM if something should go wrong, though. I've found some interesting information in this thread but I've been busy this week and I'll need to go back and read it all with more attention before I try something.
Download ODIN 4.42 and GIO ops and a sotckrom MD5 file then put it into the odin and put your phone into recovery mdoe and plug it into your computer. Then click start
you have to put your phone in downloadmode to flash with odin as far as i know,but i have an other question;
can you use heimdall with the samsung galaxy gio
I am trying to flash a new recovery on my samsung galaxy gio with ODIN after it is bricked flashing tass- 6.0.4.5.zip(this cwm seems for the mini!!!) is this possible and if so,which one can?and how to do that...
thanks in advance
Yes it is possible and you need ODIN 4.42, GiPS and a Stock Rom extracted out of the zip.
Here is a video to help you because I am too lazy to explain
http://www.youtube.com/watch?v=euZqtaAMe5c

Categories

Resources