LOSING GSM GALAXY NEXUS 3G connection - Samsung Galaxy Nexus

Everytime i flash custom rom after wiping cache and dalvik i lose my 3g connection then i had to go back to my nandroid to get the 3g back.
anyone knows what causing this ? THis is my first gsm phone never had problem with cdma.

CDMA is old. GSM is the future and will set you free.
Maybe try flashing another radio. Are you sure the ROM isn't set to only go in 2G mode? I flash ROMs regularly and they go from this:
No signal > Signal (2-4 bars, no data) > Signal (2.5G, GPRS) / Signal (2.75G, EDGE) > Signal (3G/HSPA) > Signal (4G/HSPA+)
Sometimes you also need to set the right data profile. For example, my SIM sometimes gets confused: "Do I use Virgin Mobile's data settings or Optus data settings?"
The 2G/3G thing only appears when you've got data connectivity. If you're in an area where Data cannot be used, the G/E/3G/H/H+/4G icon will not appear.

IcedCube said:
CDMA is old. GSM is the future and will set you free.
Maybe try flashing another radio. Are you sure the ROM isn't set to only go in 2G mode? I flash ROMs regularly and they go from this:
No signal > Signal (2-4 bars, no data) > Signal (2.5G, GPRS) / Signal (2.75G, EDGE) > Signal (3G/HSPA) > Signal (4G/HSPA+)
Sometimes you also need to set the right data profile. For example, my SIM sometimes gets confused: "Do I use Virgin Mobile's data settings or Optus data settings?"
The 2G/3G thing only appears when you've got data connectivity. If you're in an area where Data cannot be used, the G/E/3G/H/H+/4G icon will not appear.[/QUOTE
There is no data connection at all after restoring nandroid i get my data back .There is nothing wrong with radio when i am on stock its fine.
Click to expand...
Click to collapse

Are you sure you're flashing a GSM ROM?
If you are, you need to check your APNs and do some reboots, see if your connection comes back.

martonikaj said:
Are you sure you're flashing a GSM ROM?
If you are, you need to check your APNs and do some reboots, see if your connection comes back.
Click to expand...
Click to collapse
oh yeah i am sure flashing gsm rom . how do u check apn ?

digweed4me said:
oh yeah i am sure flashing gsm rom . how do u check apn ?
Click to expand...
Click to collapse
Settings > More... > Mobile networks > Access Point Names
they should load automatically. You can always enter manually or hit "reset to default".

martonikaj said:
Settings > More... > Mobile networks > Access Point Names
they should load automatically. You can always enter manually or hit "reset to default".
Click to expand...
Click to collapse
thanks a lot man
It only happens when i flash liquid smooth and hybrid tablet rom and i just flashed maguro build 35 after factory reset and wipe and my hspa data is working.

Related

[Q] 3G advanced configuration (help me please)

Hello there, this is my problem...
I flashed my phone and now I can't make 3G work. I have tried all this:
- call to my phone company and enter the exact parameters in configuration (user, password, server, etc)
- flash with another custom ROM
- flash with the original stock of my country (Chile) (via Odin, from Doky73 firmwares)
- backup from another GT-S5360L and restore in my phone
- enter into the servicemode *#*#197328640#*#*
Nothing of this have worked.
PLEASE HELP ME!
¿DO YOU KNOW A 3G ADVANCED CONFIGURATION MENU?
¿IS POSSIBLE THAT 3G IS GONE FOREVER?
HMM...
Did you try changing ur network mode to WCDMA? If its on auto mode then change it.. if still u dont get 3g or the H sign near ur network then its the fault of ur service provider
nicofreeride said:
Hello there, this is my problem...
I flashed my phone and now I can't make 3G work. I have tried all this:
- call to my phone company and enter the exact parameters in configuration (user, password, server, etc)
- flash with another custom ROM
- flash with the original stock of my country (Chile) (via Odin, from Doky73 firmwares)
- backup from another GT-S5360L and restore in my phone
- enter into the servicemode *#*#197328640#*#*
Nothing of this have worked.
PLEASE HELP ME!
¿DO YOU KNOW A 3G ADVANCED CONFIGURATION MENU?
¿IS POSSIBLE THAT 3G IS GONE FOREVER?
Click to expand...
Click to collapse
did you check if your apns are correct?
zeusseuz said:
did you check if your apns are correct?
Click to expand...
Click to collapse
yes! but nothing...
NAMAN.ARORA11 said:
Did you try changing ur network mode to WCDMA? If its on auto mode then change it.. if still u dont get 3g or the H sign near ur network then its the fault of ur service provider
Click to expand...
Click to collapse
yes i tried changing to only WCDMA and I lost the signal.
I put the my SIM in another SGY and I changed to only WCDMA configuration and 3G is totally ok... =/
Maybe your current location doesn't have strong enough signal for your SIM card, try changing location
Sent from my GT-S5360 using XDA
It seems to be a really weird problem.. try asking your service provider for 3g setting FOR galaxy y. If it still doesnt work then ur 3G receptor is not working.
try turning on the packet data, and switch to WCDMA only.
if it does not work turn off packet data, then goto flight mode switch to GSM only and back to WCDMA and turn on packet data again. this also happens on my phone sometimes.

[Q] {10-25-2012}{Rom}{ICS} Official Global CM9

* Unfortunately, I'm having the same problems with this ROM on HSDPA that I was having on aeroevan's ROM. GSM is found immediately on boot, however, HSDPA is very flakey. It will succeed in connecting every now and again, but then randomly drops the signal and won't reconnect. I thought maybe I just had a weak 3G signal where I was testing, but I have a BB Bold for work as well and that can easily maintain a 3G connection on the same network. I also had no problem way back in the day with CM7.2, but that ship has sailed .
Also, when the phone is in WCDMA preferred mode, after a while the phone will lose all connections (usually after a reboot but not always), including to GSM and when I go to reselect my network operator I get the message "Error while searching for networks". No matter how many times I reboot the phone or switch to "GSM Only" or "GSM/WCDMA auto" it never lets me again select my network provider.
As I said, I ran into the same problems with aero's port, so its not specific to this ROM.
* Situation are me after uproom (http://forum.xda-developers.com/showthread.php?t=1932573), spent two days lost wave, down to the original room (fullwipe finished down about 2.3.4). So lose the 3G network always in global mode (global), 3G users they will never be, but 2G ok (you spend vina sim and have installed APV vina). The physician who has experience helping hand factories. Thank a lot.
I don't known?
I do not understand.Specific guidance for me? please!
nabin229 said:
I do not understand.Specific guidance for me? please!
Click to expand...
Click to collapse
Aeroevan's rom? CM9, CM10? Is your radio outdated? What carrier are you on? More info = more help.
nabin229 said:
Situation are me after uproom (http://forum.xda-developers.com/show....php?t=1932573), spent two days lost wave, down to the original room (fullwipe finished down about 2.3.4). So lose the 3G network always in global mode (global), 3G users they will never be, but 2G ok (you spend vina sim and have installed APV vina). The physician who has experience helping hand factories. Thank a lot.
Click to expand...
Click to collapse
BTW, I don't understand this part.
I would suggest reading through the entire thread of Aeroevan's rom that you were describing as well as the Global CM9 thread. During your reading you may find and answer in there. I have found more answers that way than waiting on someone to direct me there anyway. That is all the advice I can provide with my limited knowledge.
Help me
ThePhantom97 said:
Aeroevan's rom? CM9, CM10? Is your radio outdated? What carrier are you on? More info = more help.
BTW, I don't understand this part.
I would suggest reading through the entire thread of Aeroevan's rom that you were describing as well as the Global CM9 thread. During your reading you may find and answer in there. I have found more answers that way than waiting on someone to direct me there anyway. That is all the advice I can provide with my limited knowledge.
Click to expand...
Click to collapse
I installed your room ( {Rom}{ICS} Official Global CM9), after 2 days my phone is not network. I reinstall the original room 2.3.4 but only use 2G when I used dataroaming; completely unusable 3G & network global mode always (I fullwipe data before reinstalling room 2.3.4 & APN properly installed).I then set your room again, but as I said above condition.Please help me how to be able to use 3G
because my phone is example:
Unfortunately, I'm having the same problems with this ROM on HSDPA that I was having on aeroevan's ROM. GSM is found immediately on boot, however, HSDPA is very flakey. It will succeed in connecting every now and again, but then randomly drops the signal and won't reconnect. I thought maybe I just had a weak 3G signal where I was testing, but I have a BB Bold for work as well and that can easily maintain a 3G connection on the same network. I also had no problem way back in the day with CM7.2, but that ship has sailed .
Also, when the phone is in WCDMA preferred mode, after a while the phone will lose all connections (usually after a reboot but not always), including to GSM and when I go to reselect my network operator I get the message "Error while searching for networks". No matter how many times I reboot the phone or switch to "GSM Only" or "GSM/WCDMA auto" it never lets me again select my network provider.
Ok, I don't know if anyone else is having the same problem as you. I hope I don't offend you but I am going to take a guess and say that english is not your first language as some of that is difficult for me to read and completely understand. From what I am gathering is you can connect to your carriers network but only on a temporary basis. Here are the steps I followed to connect to Verizon's network using {10-25-2012}{Rom}{ICS} Official Global CM9 - After a full wipe and clean install and after initial setup I went to (doing this from memory as I don't have it installed at the moment) Settings --> More --> Mobile Networks --> chose CDMA w/EVDO --> Exit out of settings and rebooted. When the phone booted up it recognized the Verizon network and all service and data was all working, I didn't have to change the APN settings at all. If you are still having trouble staying connected I suggest you check the version of radio you are using and consider updating it. Here is the radio thread: http://forum.xda-developers.com/showthread.php?t=1134451 I don't think I am the best person to assist you but just telling you what I would do if I were in your situation.
3G disconnect, only use 2G (GSM). Help me!
ThePhantom97 said:
Ok, I don't know if anyone else is having the same problem as you. I hope I don't offend you but I am going to take a guess and say that english is not your first language as some of that is difficult for me to read and completely understand. From what I am gathering is you can connect to your carriers network but only on a temporary basis. Here are the steps I followed to connect to Verizon's network using {10-25-2012}{Rom}{ICS} Official Global CM9 - After a full wipe and clean install and after initial setup I went to (doing this from memory as I don't have it installed at the moment) Settings --> More --> Mobile Networks --> chose CDMA w/EVDO --> Exit out of settings and rebooted. When the phone booted up it recognized the Verizon network and all service and data was all working, I didn't have to change the APN settings at all. If you are still having trouble staying connected I suggest you check the version of radio you are using and consider updating it. Here is the radio thread: http://forum.xda-developers.com/showthread.php?t=1134451 I don't think I am the best person to assist you but just telling you what I would do if I were in your situation.
Click to expand...
Click to collapse
my phone 3G is disconnect, only use 2G (GSM) , rom 2.3.4 Verizon, radio 1.09.01.0312. *I'm from Vietnam, I speak English not good, sorry.
nabin229 said:
my phone 3G is disconnect, only use 2G (GSM) , rom 2.3.4 Verizon, radio 1.09.01.0312. *I'm from Vietnam, I speak English not good, sorry.
Click to expand...
Click to collapse
No need to apologize m8. Hopefully someone more advanced than myself can assist you with your issue. I am sorry that I couldn't be of more assistance.
Trouble with wifi/3G
ThePhantom97 said:
Ok, I don't know if anyone else is having the same problem as you. I hope I don't offend you but I am going to take a guess and say that english is not your first language as some of that is difficult for me to read and completely understand. From what I am gathering is you can connect to your carriers network but only on a temporary basis. Here are the steps I followed to connect to Verizon's network using {10-25-2012}{Rom}{ICS} Official Global CM9 - After a full wipe and clean install and after initial setup I went to (doing this from memory as I don't have it installed at the moment) Settings --> More --> Mobile Networks --> chose CDMA w/EVDO --> Exit out of settings and rebooted. When the phone booted up it recognized the Verizon network and all service and data was all working, I didn't have to change the APN settings at all. If you are still having trouble staying connected I suggest you check the version of radio you are using and consider updating it. Here is the radio thread: http://forum.xda-developers.com/showthread.php?t=1134451 I don't think I am the best person to assist you but just telling you what I would do if I were in your situation.
Click to expand...
Click to collapse
I have been having the same problem. Flashed CM10 after full wipe, mobile network (for verizon) is CDMA w/EVDO, tried rebooting and switching and wiping and re-flashing but I have no wifi and bad 3G. When I revert to stock everything is fine. How can I fine the latest radio for CM10, I didn't see any JB in the thread link.
SS823 said:
I have been having the same problem. Flashed CM10 after full wipe, mobile network (for verizon) is CDMA w/EVDO, tried rebooting and switching and wiping and re-flashing but I have no wifi and bad 3G. When I revert to stock everything is fine. How can I fine the latest radio for CM10, I didn't see any JB in the thread link.
Click to expand...
Click to collapse
The latest is the ICS radio .320 it will work on JB roms as well.
Have you guys flashed the new ics firmware?
I'm so fresh you can suck my nits...

[Q] Lost Data Signal

I recently (1 week ago) flashed Paranoid Android's latest ROM (3.99 I believe) and have been running flawless since the flash. However, this morning my phone hasn't been able to pick up a data signal. I can connect to WiFi and also can receive calls (I am getting phone signal), but no data is working on my phone unless I connect to a WiFi signal.
What I've tried:
- rebooting the device
- updating profile and prl
- rebooting to recovery and fixing permissions
- rebooting the device
- toggling wifi and data (on/off)
- rebooting the device
Did I mention I rebooted the device? Nothing.
Any help here?
joshuaharp said:
I recently (1 week ago) flashed Paranoid Android's latest ROM (3.99 I believe) and have been running flawless since the flash. However, this morning my phone hasn't been able to pick up a data signal. I can connect to WiFi and also can receive calls (I am getting phone signal), but no data is working on my phone unless I connect to a WiFi signal.
What I've tried:
- rebooting the device
- updating profile and prl
- rebooting to recovery and fixing permissions
- rebooting the device
- toggling wifi and data (on/off)
- rebooting the device
Did I mention I rebooted the device? Nothing.
Any help here?
Click to expand...
Click to collapse
Is data even enabled? Check and uncheck, reboot (Settings > Wireless & Networks > More > Mobile Networks > Data enabled)
Do you have a data usage cap set?
It sounds like Sprint cause of the profile/prl. I've had outages for my area before, luckily my personal phone is on AT&T...
oj4y said:
Is data even enabled? Check and uncheck, reboot (Settings > Wireless & Networks > More > Mobile Networks > Data enabled)
Do you have a data usage cap set?
It sounds like Sprint cause of the profile/prl. I've had outages for my area before, luckily my personal phone is on AT&T...
Click to expand...
Click to collapse
Thanks for the suggestion, unfortunately I've tried it already. I do not have a data cap set on the phone. I'm hoping it is with Sprint and not anything too complicated. If other co-workers have Sprint and their data works, would that indicate that it is on my end?
The data issue with sprint is because its a 4.3 ROM, and data with those ROMs( on sprint ) is hit or miss. They're getting better, but not 100% yet. Just flash back to 4.2.2 and you should be fine
Sent from my Galaxy Nexus

Lolipop problem with 4G LTE

Hello
After reboot phone setup wcdma/gsm network priority. There is also problem with changing to lte/wcdma/gms , you cannot click it directly, need first click like gsm and then lte to make it active.
Using official lolipop , IL customization
Anyone noticed 4G/LTE problem on Lolipop ?
Golempl said:
Hello
After reboot phone setup wcdma/gsm network priority. There is also problem with changing to lte/wcdma/gms , you cannot click it directly, need first click like gsm and then lte to make it active.
Using official lolipop , IL customization
Anyone noticed 4G/LTE problem on Lolipop ?
Click to expand...
Click to collapse
I'm having the same problems, but I finally get LTE working
Same for me. But I don't have LTE yet. So didn't bother too much.
maybe you can try this:
FIX 4G PROBLEMS
edit build.prop
- look for 'telephony.lteOnCdmaDevice=0' and change it to 'telephony.lteOnCdmaDevice=1'
look for 'ro.semc.version.fs=GLOBAL-HSPA' and change it to 'ro.semc.version.fs=GLOBAL-LTE'
reboot your phone
type *#*#4636#*#*
Select phone informations (first menu)
turn off radio
in network prefered I've selected TD-SCDMA, LTE, CDMA, EvDO GSM/WCDMA
turn on radio again
exit
type *#*#4636#*#* again and look in network prefered, it will be on LTE/GSM auto (PRL) and 4G should be there
LTE/4G issue after hard reset
Hi to all,
and thank you for the tips doenen.
I have the same issue since i hard-reset the phone.
Just to be clear, if we want to edit the build.prop file, we have to be rooted ?
cmartinez said:
Hi to all,
and thank you for the tips doenen.
I have the same issue since i hard-reset the phone.
Just to be clear, if we want to edit the build.prop file, we have to be rooted ?
Click to expand...
Click to collapse
Yup, since it is located in system partition.
4G/LTE issue Fixed.
Thank you Mirhawk,
Everything got back in order.
Cmartinez.
doenen said:
maybe you can try this:
FIX 4G PROBLEMS
edit build.prop
- look for 'telephony.lteOnCdmaDevice=0' and change it to 'telephony.lteOnCdmaDevice=1'
look for 'ro.semc.version.fs=GLOBAL-HSPA' and change it to 'ro.semc.version.fs=GLOBAL-LTE'
reboot your phone
type *#*#4636#*#*
Select phone informations (first menu)
turn off radio
in network prefered I've selected TD-SCDMA, LTE, CDMA, EvDO GSM/WCDMA
turn on radio again
exit
type *#*#4636#*#* again and look in network prefered, it will be on LTE/GSM auto (PRL) and 4G should be there
Click to expand...
Click to collapse
Thank you.. Works for me too!! Previously i had to restore my phone to get my lte back.. :good::good::good::good:
doenen said:
maybe you can try this:
FIX 4G PROBLEMS
edit build.prop
- look for 'telephony.lteOnCdmaDevice=0' and change it to 'telephony.lteOnCdmaDevice=1'
look for 'ro.semc.version.fs=GLOBAL-HSPA' and change it to 'ro.semc.version.fs=GLOBAL-LTE'
reboot your phone
type *#*#4636#*#*
Select phone informations (first menu)
turn off radio
in network prefered I've selected TD-SCDMA, LTE, CDMA, EvDO GSM/WCDMA
turn on radio again
exit
type *#*#4636#*#* again and look in network prefered, it will be on LTE/GSM auto (PRL) and 4G should be there
Click to expand...
Click to collapse
Rauno
Hi, I did all the steps except the ro.semc one, because there is no such setting in my build.prop. However I still wasn't able to get 4g working, it just keeps switching back to the old settings.. Any ideas? Running cm12.1 android 5.1.1
Re issue with LTE/4G
Hello,
i got my phone back from SONY's technical services, cause i had a bunch of issue (i sent it twice in a month).
For now, the battery drain isseu seems to be fixed, but i do not have 4G/LTE.
I already encounter this issue, and after the service menu manipulation, everything got back in order.
I tried to do the same manipulations, but i can't turn off radio. It's like it was locked.
Any ideas ?
Thanks for helping.
Regards
doenen said:
maybe you can try this:
FIX 4G PROBLEMS
edit build.prop
- look for 'telephony.lteOnCdmaDevice=0' and change it to 'telephony.lteOnCdmaDevice=1'
look for 'ro.semc.version.fs=GLOBAL-HSPA' and change it to 'ro.semc.version.fs=GLOBAL-LTE'
reboot your phone
type *#*#4636#*#*
Select phone informations (first menu)
turn off radio
in network prefered I've selected TD-SCDMA, LTE, CDMA, EvDO GSM/WCDMA
turn on radio again
exit
type *#*#4636#*#* again and look in network prefered, it will be on LTE/GSM auto (PRL) and 4G should be there
Click to expand...
Click to collapse
Worked for me,cheers.

Network Signal Dropping after update to 6.0M (Poland)

When i bought D855p it came with 4.4, then i updated to 5.1, all official. After this i installed Cyanogenmod 12.1 and everything were fine. But when i installed 6.0(poland) my network signal keeps droping the intire day, it changes to UMTS and HSPA. I cant use my phone as a phone. The only way to solve this is, every time that i turn off the cel or put in airplane mode, is enter in MOBILE NETWORKS > NETWORK OPERATORS > SEARCH NETWORKS and choose GSM. (but i need to do this EEEEEVERY TIME that my cel turns off/airplane mode).
6.0 is the only ROM that i can choose GSM and the signal keep ~stable~. At least i can use my phone as a phone !
I did a backup of my IMEI before installing cm12 as well.
Things that i already tried :
-Flash ALL modem (ALL) , including 21C.
-intall cm13 and after cm12. Using TWRP 2.8 and 3.0.
-stock 4.4 , 5.0 , 5.1 and again 6.0. Using LGFlashTools
-MANY factory resets and wipes !
anybody can help me ? :good:
Same issue. I am on stock 4.4 and mobile network signal keeps dropping on weak signal area. I set to gsm/edge mode to mobile network. But nothing goes fine.
http://forum.xda-developers.com/lg-g3/help/lg-g3-4g-network-drops-t3394408#post67304224
Try this. However in your case download the Polad specific .kdz files
engmia said:
http://forum.xda-developers.com/lg-g3/help/lg-g3-4g-network-drops-t3394408#post67304224
Try this. However in your case download the Polad specific .kdz files
Click to expand...
Click to collapse
i'll try ! thanks
engmia said:
http://forum.xda-developers.com/lg-g3/help/lg-g3-4g-network-drops-t3394408#post67304224
Try this. However in your case download the Polad specific .kdz files
Click to expand...
Click to collapse
Doesn't work , sadly :crying:
i also tried to put in Network mode : GSM/WCDMA ( worked ) but when i choose GSM/WCDMA/LTE auto , signal drops every time. It is a solution to do this, but i cant use my LTE, and it sucks ...
Disable VOLTE n go to ur models service menu (check google) for me it was
*#546368#*851# (my model = d851)
*#546368#*XXX# (ur model=D8XX) verizon sprint numbers are differently
go to field test >network mode>set GSM permanently (try different gsm 850,990,etc)
Back > RAT selection > select GSM
U cant have network problems now cuz ur permanently set to gsm dont use 3g or 4g use wifi
hit like it helps
tevims said:
Doesn't work , sadly :crying:
i also tried to put in Network mode : GSM/WCDMA ( worked ) but when i choose GSM/WCDMA/LTE auto , signal drops every time. It is a solution to do this, but i cant use my LTE, and it sucks ...
Click to expand...
Click to collapse
I'm sad to hear that. Try also flashing modem 21C. There are also other guides for restoring your signal around the forum, different things seem to work for different people.

Categories

Resources