[UTILITY] HellFire Kindle Nullifier 1.0 - Kindle Fire Android Development

this is made by Volk released by me with his permission
The Nullifier.
This uses a special command in combination with a special file to overwrite the internal partitions with 0's, hence "Null" for 0 and "-ifier" for the fact that it does something. It also formats *all* the partitions afterward and *new* checks for, and repairs any errors on them.
Some brief need to knows:
1. This is a little lengthy process so please bear with it. The longest wipe is on /data which will take about 7 minutes. Obviously, make sure you have plenty of battery life before running it or are charging.
2. You *must not* power off your tablet without first installing a new ROM or restoring a nandroid after you use this. See post here:
3. I will provide help, support, etc., but I am not, nor is anyone else involved with this, responsible for any problems you may have in the extremely unlikely event that you do.
Folder:
http://www.mediafire.com/?unsvbx50wt3hh13
Q: Why not just format everything?
A: Because a format isn't intended to erase data, though to a degree does so. This script is intended and will wipe out the data and leave a clean set of partitions for a ROM to be installed to.
Q: (Submitted by Cargohook) Would it be idiotic or fruitless to run this and then restore a nandroid backup? I mean, would that defeat the purpose?
A: I highly doubt it would be a waste of your time. On an educated hunch, when you restore a nandroid all CWM does is format the partitions then load the data from the nandroid to those partitions; back to square 1 with old data being left behind.
Q: Why don't I get a message about formatting /boot?
A: Because it doesn't format /boot. Why? In testing I found that it doesn't need it. It's all a matter of how Android uses boot.img and how it's copied.
Q: Does this wipe Dlavik?
A: Technically. Dalvik is contained within /cache which gets Nullified so, yes. And see the following post regarding not needing to wipe the Dalvik on top of wiping /cache:
http://forum.xda-developers.com/show....php?t=1564287
Q: Does this wipe internal or external SD? (added because it keeps getting asked)
A: In a word, no.
Q: Will using this cause nand-failure or make my phone unusable if used too much?
A: In my opinion, no. In other's, yes. To give you a better answer, please see Overground's post on that subject here: http://forum.xda-developers.com/show...&postcount=327
(Thanks for the objective opinion overground)

reserved for later

I'll give it a shot. Sounds like a good deal for a clean install.
Sent from my Amazon Kindle Fire using xda premium

If anyone runs this and has errors please make sure to get the log and either post it or copy the info on it... We wont be guessing as to the error and gotta have specifics to get great resolution. Please and thank you.
Edit:
I'd like to restate this btw:
You *must not* power off your tablet without first installing a new ROM or restoring a nandroid after you use this.

Nice I was wondering if volk would port this for the KF as well.
Sent from my LG-P999 using Tapatalk 2

pio_masaki said:
Nice I was wondering if volk would port this for the KF as well.
Sent from my LG-P999 using Tapatalk 2
Click to expand...
Click to collapse
yea he needs to get the Fire as well... but yup He's been wanting to do it for a while now actually. Glad its finally here too.

As this is being released by hell should I start on the videos for this as well? Also, I would love this for my Acer iconia too. Has this been tested on twrp and cwm yet?
Tapatalked from my A100 - Flex Reaper RF1.

pio_masaki said:
As this is being released by hell should I start on the videos for this as well? Also, I would love this for my Acer iconia too. Has this been tested on twrp and cwm yet?
Tapatalked from my A100 - Flex Reaper RF1.
Click to expand...
Click to collapse
ill leave that one up to you. but afaik its only been tested in cwm.

pio_masaki said:
As this is being released by hell should I start on the videos for this as well? Also, I would love this for my Acer iconia too. Has this been tested on twrp and cwm yet?
Tapatalked from my A100 - Flex Reaper RF1.
Click to expand...
Click to collapse
Yes ran it on cmw
Sent from my LG-P999 using xda premium

OK when I get some time later I'll test it with twrp.
Edit: testing with twrp now, I'll post back battery % used and total time spent nullifying when it completes. Dual wipe, so just half it for a single pass.
Edit 2: here's my findings using dual pass on twrp:
Starting battery 81% at 11:31am
Dual wipe end 77% 11:46am
Install hfks
After flash 76% 11:47am
Reboot
75% 11:51am at system start
Using this information you should get an idea of how much battery is minimum required for nullifying and flashing a rom then rebooting into the system. Works perfectly fine with twrp, so twrp and cwm users rejoice, we have nullifire for the KF! Thanks to Volk and hell for releasing this tool.
Sent from my LG-P999 using Tapatalk 2

Sorry to sound like a noob, but I've never used a script through twrp. How do you do it? I usually just run scripts with from toolbox but don't want to try and have it get screwed. Thanks a lot, I know its probably really simple, just wanted some steps to do it.
Nick B

Its the same as flashing a rom, just pick the nullifier zip instead of a rom. I'm working on a video to show the process in twrp, but for now here goes....
Boot into your recovery ( twrp or cwm doesn't matter), pick install zip from SD card, go to where you have the nullifire.zip, select it, and hit flash. After its done be sure to restore a nandroid or flash a rom, never power down or reboot without one or the other being done first! Also make sure to have 30% or more battery, or be plugged in before starting.
Tapatalked from my A100 - Flex Reaper RF1.

BrooksBlood said:
Sorry to sound like a noob, but I've never used a script through twrp. How do you do it? I usually just run scripts with from toolbox but don't want to try and have it get screwed. Thanks a lot, I know its probably really simple, just wanted some steps to do it.
Nick B
Click to expand...
Click to collapse
its simple. Download the script. then reboot into twrp or cwm then install the script.. once its done then install your chosen rom... wait for it to be done. fix permissions then reboot and enjoy.. super simple and super cool..

Holy crap I'm stupid, if I would've noticed it was a zip I would've known that hahaha sorry guys
Sent from my GT-P1000 using XDA

BrooksBlood said:
Holy crap I'm stupid, if I would've noticed it was a zip I would've known that hahaha sorry guys
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
No biggy, I think its a little confusing as its referred to as a script, and generally those are in a zip file, extracted, then run in system, not flashed through recovery.
Tapatalked from my A100 - Flex Reaper RF1.

Ok, I'm really going to come across as a noob, but what are the benefits to running this? I guess I'm confused to what it actually does.

Stage said:
Ok, I'm really going to come across as a noob, but what are the benefits to running this? I guess I'm confused to what it actually does.
Click to expand...
Click to collapse
The concept to its use is to minimize bugs caused by left over data. The wipe process of cwm and twrp is a format, it deletes the arrows pointing to where data is, but the data remains intact. It allows the system to overwrite the data. Nullifier overwrites the data itself with zeros, making it so no leftover data is there to cause problems later, then formats afterwards for rom use. Essentially leaving a blank slate to read and write from without worries of old data creeping in.
Tapatalked from my A100 - Flex Reaper RF1.

pio_masaki said:
The concept to its use is to minimize bugs caused by left over data. The wipe process of cwm and twrp is a format, it deletes the arrows pointing to where data is, but the data remains intact. It allows the system to overwrite the data. Nullifier overwrites the data itself with zeros, making it so no leftover data is there to cause problems later, then formats afterwards for rom use. Essentially leaving a blank slate to read and write from without worries of old data creeping in.
Tapatalked from my A100 - Flex Reaper RF1.
Click to expand...
Click to collapse
Ok thank you!
Sent from my Amazon Kindle Fire using xda premium

I can't get the link to work :-\
Sent from my GT-P1000 using XDA

BrooksBlood said:
I can't get the link to work :-\
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
MF was giving me issues too.. but I thought it was my kinda limited data connection in my office building.. give a few ill upload it here...
edit:
Here you go, Ive attached it.

Related

[RECOVERY] CWMR 5.5.0.4 for I957 (LTE)

Hello,
I have ported the latest clockworkmod recovery to the galaxy 8.9 LTE i957 tablet.
This is a recovery and not a kernel, thus you can run whatever you wish.
Instructions:
0) MAKE SURE YOU HAVE AN I957, do not flash this otherwise.
1) Flash this file via ODIN: CWMR5x_i957_recovery.tar.md5
2) Attempt a backup (there appears to be a bug in 5.5.0.4 that long names can possibly cause it to hang during a backup.) If it works or fails, reboot and mount your tablet in your OS. If you get hung, adb shell into your device and reboot it.
3) After your tab is mounted, go into the clockworkmod folder and create an EMPTY FILE with NO EXTENSION called .hidenandroidprogress
Note the period and lack of extension. This prevents the backup routine from enumerating the file list which I suspect is causing the hang during backup.
This is considered an ALPHA release with only two users thus far. No loss of data or damage was caused in the testing of this file. Please try it and report any issues you have with it. I am hoping this opens up the development for this device. I personally dont have it nor did I have access to one when I ported this so I need the community's help to track down issues/bugs. This was a pretty big challenge to get everything working right.
The full device tree I built for this can be found here:
android_device_samsung_SGHI957
Feel free to use this however you wish, though please give credit if it helps you devs.
Thanks to orlandoxpolice and jaywheelz for patiently testing this thus far.
OP updated with alpha build
Thanks for all your hard work
Sent from my SAMSUNG-SGH-I727 using xda premium
Thanks utkanos all the work is much appreciated.
This is amazing utkanos!
I'm gonna send ya another donation for all your hard work!
wahoooo!
Oh and hey I helped too, sacrificed one tab to the samsung gods!
I have tested everything with this recovery except for sd card re partitioning, wipe data / factory reset, and restore (nandroid).
Known Issues:
If you enter key test, you cant back out.
nandroid backup may hang for some users, the .hidenandroidprogress may have fixed this.
mounting and unmounting data is finicky sometimes.
Orlando is this the same file we had last night? Or it's it slightly changed since then?
Same file. I also installed cwm from market and enabled quick recovery and it worked
Sent from my SAMSUNG-SGH-I957 using xda premium
I thought cwm from the market causes our tab to go haywire. Is it the as what utkanos did or a different version?
You can install the program just don't flash its recovery. Go into options and enable quick recovery
Sent from my SAMSUNG-SGH-I957 using xda premium
Yeah I've been using quick boot from the market.
Any updates?
I'm finally done moving so should be available again.
Development is done until we get more testers
Sent from my SAMSUNG-SGH-I727 using xda premium
Recovery
Ok guys
I installed the recovery in my new SGH-I957 and all went well, now I have only tried the "wipe Dalvik cache" and it works great!
Utkanos Thanks for the work done!
Max
Ikaro said:
Ok guys
I installed the recovery in my new SGH-I957 and all went well, now I have only tried the "wipe Dalvik cache" and it works great!
Utkanos Thanks for the work done!
Max
Click to expand...
Click to collapse
Try to make a backup
orlandoxpolice said:
Try to make a backup
Click to expand...
Click to collapse
First testing the backup, the tablet hangs while copying the file "android.hardware.location.xml"
So I created the file ".hidenandroidprogress" (with Polaris office) and I have saved in the dir "clockworkMod/backup." I tried again to backup and it worked.
Now I have to try a restore, but I will tomorrow or the next!
Max
Awesome!
Look forward to hearing the results of the restore!
So was a restore successful?
If so, I may factory reset mine, root, wipe all the junkware/bloatware, garbage bookmarks, do my browser tweaks, a few other random bits and pieces, and post it up here as a cleaned up, rooted stock rom.
Don't have the success of installing it.. it said is a wrong tar or md5 file and it soft bricked it.. guess I'll wait for the next update.. thanks again
Sent from my SAMSUNG-SGH-I957 using XDA App
Will give this a Sticky and thanks for doing it

Youtube app not working

I have a kindle fire that has a CM9 ICS 4.0.4 custom rom. My problem is, i can't seem to make the youtube app work. I downloaded the app from google play. When I open the app, it automatically shuts down. Any ideas? Thanks!
Sent from my Nexus 7 using Tapatalk 2
oaba09 said:
I have a kindle fire that has a CM9 ICS 4.0.4 custom rom. My problem is, i can't seem to make the youtube app work. I downloaded the app from google play. When I open the app, it automatically shuts down. Any ideas? Thanks!
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
What kernel are you using?
ath1337 said:
What kernel are you using?
Click to expand...
Click to collapse
3.0.31+
Sent from my Galaxy SII using Tapatalk 2
Yeah try another rom like this one http://forum.xda-developers.com/showthread.php?t=1682567
Thepooch said:
Yeah try another rom like this one http://forum.xda-developers.com/showthread.php?t=1682567
Click to expand...
Click to collapse
That's actually the rom I'm using now
Then you should have no issues with youtube whatsoever uninstall reinstall or wipe wipe wipe reflash... Also I have had issues with youtube before it should ask for google permissions and to add your +1's and if you decline the application will not function... Just saying
Thepooch said:
Then you should have no issues with youtube whatsoever uninstall reinstall or wipe wipe wipe reflash... Also I have had issues with youtube before it should ask for google permissions and to add your +1's and if you decline the application will not function... Just saying
Click to expand...
Click to collapse
Tried re-installing, clearing the cache, and clearing the data but the app still shuts down. I guess I'm going to need to reflash. Might as well flash a jelly bean rom instead.
Did you wipe everything on your USB partition after you installed ICS?
Vibrate said:
Did you wipe everything on your USB partition after you installed ICS?
Click to expand...
Click to collapse
I wiped everything before installing but I didn't wipe anything afterwards
Do I need to wipe USB partition?
oaba09 said:
I wiped everything before installing but I didn't wipe anything afterwards
Do I need to wipe USB partition?
Click to expand...
Click to collapse
Yeah, after your new ROM is installed, go into the android system properties under storage and you'll notice that you're usb partition isn't completely empty, so erase all that. This way when you install gapps it's fresh.
---------- Post added at 02:10 AM ---------- Previous post was at 01:58 AM ----------
Having to wait 5 minutes before I can edit or post is annoying....
I wanted to mention earlier to also make sure you're using the GAPPS version that was recommended with your ROM. You probably got the GAPPs from a link in the same thread where you got your ROM, but wanted to mention in it just in case you didn't.
I dont recommend wiping your sdcard if thats what your asking its completely unecassary....
Thepooch said:
I dont recommend wiping your sdcard if thats what your asking its completely unecassary....
Click to expand...
Click to collapse
Maybe you think I told him to wipe SD from twrp. Which is not something i said to do. Assuming he doesn't need to back anything up, what could it hurt to erase the usb storage from the storage properties?
I did it myself an hour ago after I installed JellyBean. I'm pretty sure you're wrong when you say its unnecessary. But either way, I wasn't going to take any chances with having some old shared resources screw up a fresh install.
Erasing usb storage and wiping your sdcard are one and the same a completely unecessary step. the only wipes you need to perform on a regular basis when changing a system is factory reset, cache, dalvik, and system unless there happens to be something wrong with the sdcard itself and Im pretty sure your wrong about it being a needed step someone correct me if Im wrong....
Thepooch said:
Erasing usb storage and wiping your sdcard are one and the same a completely unecessary step. the only wipes you need to perform on a regular basis when changing a system is factory reset, cache, dalvik, and system unless there happens to be something wrong with the sdcard itself and Im pretty sure your wrong about it being a needed step someone correct me if Im wrong....
Click to expand...
Click to collapse
Well if he takes my advice, and I'm wrong no harm done. If he takes your advice.... wait, what is your advice?
My advice is not to take your advice enough said...
Thepooch said:
My advice is not to take your advice enough said...
Click to expand...
Click to collapse
LOL. exactly
exactly nothing I posted information previous to your entery here in this thread that I felt was relevant to the situation.
Vibrate said:
Well if he takes my advice, and I'm wrong no harm done. If he takes your advice.... wait, what is your advice?
Click to expand...
Click to collapse
You are making several incorrect assumptions and using them as a basis for your suggestion. That's what makes it wrong. Although it is true that no real harm would be done by wiping out the /sdcard storage space, it is in fact unnecessary. Apps installed by the user get placed in /data along with all of their settings and other files they needs to operate. The /sdcard is used to store files like audio, video, books, etc. Wiping /sdcard before or after installing gapps won't make it any more "fresh" than it would be otherwise.
I've been around this forum for a while and you are the first one I can remember to advocate wiping /sdcard after a flash. While your suggestion for the OP to make sure the right gapps package for the ROM gets flashed is appropriate, I'm going to say you are off the mark with this one. It's not going to come into play when troubleshooting the youtube issue.
Please end this little side discussion as it's not pertinent to the OP.
EDIT: To the OP - I don't remember which ROM it was, but I thought I read about some video problems in one of these. Have you checked the thread to see if others are having similar problems?
kinfauns said:
You are making several incorrect assumptions and using them as a basis for your suggestion. That's what makes it wrong. Although it is true that no real harm would be done by wiping out the /sdcard storage space, it is in fact unnecessary. Apps installed by the user get placed in /data along with all of their settings and other files they needs to operate. The /sdcard is used to store files like audio, video, books, etc. Wiping /sdcard before or after installing gapps won't make it any more "fresh" than it would be otherwise.
I've been around this forum for a while and you are the first one I can remember to advocate wiping /sdcard after a flash. While your suggestion for the OP to make sure the right gapps package for the ROM gets flashed is appropriate, I'm going to say you are off the mark with this one. It's not going to come into play when troubleshooting the youtube issue.
Please end this little side discussion as it's not pertinent to the OP.
EDIT: To the OP - I don't remember which ROM it was, but I thought I read about some video problems in one of these. Have you checked the thread to see if others are having similar problems?
Click to expand...
Click to collapse
Yup...There seems to be no problem with the other users....I'm gonna try to reflash the thing. Maybe I did something wrong during the process. Thanks!
After reflashing the ICS rom and GAPPS, youtube seems to working perfectly now. Thanks for the help guys!

Kernal cleanser and davlik cache wipe fix

Does any one here know if some of the Kernal cleanser zips from the s2 for TMO would work on the s3? If not are there any similar options?
Also is there a davlik wipe that works properly on the s3? Similar to the dark side zips. Cwm is not doing so correctly.
Sent from my SGH-T999 using xda premium
Wildchld has a Superwipe script in the op of his xquizit thread. That's the closest thing I can think of for us right now, but it wipes everything.
Don't use any from another device. Depending how its written it could brick you.
Should be pretty easy to make it work for ours. Ill try to find it and see if I can't get it working for us.
Do you have a link to it?
Just curious, how is cwm not doing the job for you? Does it error or just seem to not work right?
Sent from my SGH-T999 using xda app-developers app
This is the link for superwipe for the Hercules
http://sourceforge.net/projects/darksidetools/files/SGH-T989_DARKSIDE.SUPER.WIPE_EXT4.zip/download
Sent from my SGH-T999 using xda premium
Well not exactly what I was looking for but it will work for clean flashes. Thanks kind sir. This is from the same dev as the s2 so it's solid I am sure.
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
Wildchld has a Superwipe script in the op of his xquizit thread. That's the closest thing I can think of for us right now, but it wipes everything.
Don't use any from another device. Depending how its written it could brick you.
Should be pretty easy to make it work for ours. Ill try to find it and see if I can't get it working for us.
Do you have a link to it?
Just curious, how is cwm not doing the job for you? Does it error or just seem to not work right?
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
It just seems not to work. It goes way to fast to seem to be working and throws the same extsd error as the s2 had done. How is twrp? Is it worth the try? I have heard many issue can occur with it.
Sent from my SGH-T999 using xda premium
I have been using TWRP since I rooted my phone back in June, have not had 1 issue with it. Everything works flawlessly, I have flashed almost every AOKP, CM10, TW ICS & TW JB ROM out there thru TWRP and never lost my IMEI and the wipe functions in it work just fine. I usually wipe cache/delvik, system & factory reset 3 times. For me it seems to wipe pretty fast ( that's why I do it 3x ).Just to be safe.
belial20xx said:
It just seems not to work. It goes way to fast to seem to be working and throws the same extsd error as the s2 had done. How is twrp? Is it worth the try? I have heard many issue can occur with it.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Well isn't this normal since there is no external sd ext partition? I mean sure one could write a simple zip to delete /data/dalvik-cache.
And there really isn't a way to check it either. Cause I don't think adb works in recovery mode.
Sent from my SGH-T999 using Tapatalk 2
The Dalvik wipe in CWM works fine. It's very fast (just a few files), and the "error message" can be safely ignored. It's more like an informative message, not an error message. If you don't think it worked, just reboot your phone, and you will see that it did, infact, work.
There are still people going on about IMEI loss with CWM. First of all, you should have backed up your IMEI with su > reboot nvbackup in a terminal emulator. When your IMEI is 0, what happened was your nvdata got corrupted, so the backups were restored. Problem is you didn't make a backup, so those partitions contained nothing but dummy data, instead of the nvdata they are supposed to contain. It's been theorized that this is a screw up at the factory level. Easily rectified.
Last I checked, no one has figured out why this corruption happens. Flashing a nightly flashes the kernel and copies system files. Which means it can happen with either CWM or TWRP. I suspect the disparity in user bases, combined with the rarity of the problem, is why you don't see people complaining about IMEI loss with TWRP.
Kernel cleanser? You don't need one. Just flash a new kernel, it will overwrite the old one (it's a partition).
What problems have you heard about with TWRP? My complaints are mostly nitpicks, and I'm biased. It works fine. Make sure you're always using the latest versions, though.
Aerowinder said:
The Dalvik wipe in CWM works fine. It's very fast (just a few files), and the "error message" can be safely ignored. It's more like an informative message, not an error message. If you don't think it worked, just reboot your phone, and you will see that it did, infact, work.
There are still people going on about IMEI loss with CWM. First of all, you should have backed up your IMEI with su > reboot nvbackup in a terminal emulator. When your IMEI is 0, what happened was your nvdata got corrupted, so the backups were restored. Problem is you didn't make a backup, so those partitions contained nothing but dummy data, instead of the nvdata they are supposed to contain. It's been theorized that this is a screw up at the factory level. Easily rectified.
Last I checked, no one has figured out why this corruption happens. Flashing a nightly flashes the kernel and copies system files. Which means it can happen with either CWM or TWRP. I suspect the disparity in user bases, combined with the rarity of the problem, is why you don't see people complaining about IMEI loss with TWRP.
Kernel cleanser? You don't need one. Just flash a new kernel, it will overwrite the old one (it's a partition).
What problems have you heard about with TWRP? My complaints are mostly nitpicks, and I'm biased. It works fine. Make sure you're always using the latest versions, though.
Click to expand...
Click to collapse
Its actually not just a few files. Its quite some 60 megs depending how many apps you have installed
I made a dalvik cache wiper.
If you notice when you use CWM to clear dalvik cache, then reboot, it doesnt say android is upgrading at all. Making me think it doesnt work.
But when you just flash my script, it says its upgrading.
the zip is simple, all it does is delete_recursive("/data/dalvik-cache/") and thats it.
elesbb said:
Its actually not just a few files. Its quite some 60 megs depending how many apps you have installed
Click to expand...
Click to collapse
Obviously, it was an exaggeration.
After your report on dalvik wipe not working, I was inclined to try it myself, since I always wipe cache+dalvik when flashing a new rom. Wiping just dalvik, I was greeted with the optimizing apps prompt on the next boot.
Aerowinder said:
Obviously, it was an exaggeration.
After your report on dalvik wipe not working, I was inclined to try it myself, since I always wipe cache+dalvik when flashing a new rom. Wiping just dalvik, I was greeted with the optimizing apps prompt on the next boot.
Click to expand...
Click to collapse
So did i.. but it optimized the same amount of apps that the "wipe cache" option does. I seriously wonder now if they are one in the same. Like if they are coded to wipe /cache and /data/dalvik-cache. Cause when using my zip, i only optimize 58 apps.

For Users of CWM 6+ and Developers..

Devs, please specify on your flashing instructions for users of CWM 6.0.x.x and above, that TDJs superwipe and cache wipe script will break CWM. TDJ never removed the fixes he included in the script for CWM 5.0.2.7 and they are the root of the issue of the recovery breaking when using the scripts with CWM 6.0+. They are only meant for CWM 5.0.2.7 AND TWRP 2.2+ and people do not know this. As you may or may not know using these on any version of CWM other than 5.0.2.7 BREAKS THE RECOVERY!!! The forums are piling up with people complaining about broken CWM installations.
If you wish to continue using TDJ's wipe scripts, Flash TWRP 2.3.1.1, which you can DL here: https://www.dropbox.com/s/qibb4qrp4zdc76a/TWRP-2.3.1.1-hercules.zip
or visit the TWRP 2.3.1.1 in it's own thread here: http://forum.xda-developers.com/showthread.php?t=1768742
For users of CWM 6.0+, please refer to and use the flashing instructions provided within this thread instead of using the wipe scripts:
http://forum.xda-developers.com/showthread.php?t=1926754
They work the exact same way whether you're on CWM or TWRP.
A few pointers..
-Please stop fixing permissions and cache wiping after flashing a ROM. This is only necessary if you're having issues with the ROM AFTER you have installed it.
-IF you are using any of TDJs ROMS ONLY use CWM 5.0.2.7 OR TWRP 2.2+. His ROMS automatically flash the aforementioned superwipe script, causing reboot hangs. The only method to fixing the reboot hang is to flash TDJ's Cache Wipe and this breaks CWM's ability to flash ANYTHING correctly. Forcing the user to have to ODIN back to stock.
The forums are getting cluttered up with people having issues that can be completely avoided if the specifics are stated within your flashing instructions.
Instructions have been edited and specified further upon to avoid further confusion.
Sent from my SGH-T989 using xda premium
good info...
Flashable wipe scripts are made by many different devs on multiple devices. Most of the time the superwipe scripts do a better job between rom flashing .. to be honest even though its not needed it is a convenience for some. I use a superwipe script on my wife's sensation all the time between flashing .. I'd say if the script breaks the recovery then the recovery is borked...
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
I think the info is good to put out there, but the thread title and the way you worded this needs to be edited.. I mean your not a dev and i mean this in a nice way.. you don't get to tell them what they should and should not do.. just sayin..
AND the cache wipe/ fix perm script was made because CWM wasn't doing it correctly. Yes that is correct..
The Superwipe was made for yes the same reason, however its also to make sure that all of the partitions get wiped and aligned correctly before a flash... just like every other superwipe for every other phone (there is many many of these scripts..)... still relevant and useful..
Bottom line is newer versions of CWM apparently doesn't play well with these kinds of scripts.. and that to me is an issue with the recovery..
HOWEVER ya'll should stop arguing over this, it makes you bolth look a bit childish and petty..
Alrighty then...I have done a full sweep of this thread. No more fighting whats so ever. Digital bliss everyone is entitled to their own opinions...that does not mean you can voice them without getting lashed at. RushAOZ...not everyone is having this issue obviously but the thread is a great reference to those that are.
Oh.. btw.. fixing perm and wiping cache is a good idea after a rom flash... your giving bad Info here.. It insurers that there is not going to be anything in your dalvik cache that could conflict. And doing fix fix permissions just makes sure that everything is set and aligned correctly. If anything it 100% does not cause issues and is recommended ...
You should really take that out of your post
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
PJcastaldo said:
Oh.. btw.. fixing perm and wiping cache is a good idea after a rom flash... your giving bad Info here.. It insurers that there is not going to be anything in your dalvik cache that could conflict. And doing fix fix permissions just makes sure that everything is set and aligned correctly. If anything it 100% does not cause issues and is recommended ...
You should really take that out of your post
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Sorry, but that's absolutely unnecessary and actually does cause issues.
To do these steps after the ROM has loaded and has been under use causes no issues and does fix any issues you might have. For example I just flashed cm10 nightly from fresh. After I had completely set up my phone and installed and restored app data I noticed my phone was charging extremely slow. Fixed permissions and everything's in order now. But wiping cache and fixing permissions immediately after flashing, without loading the ROM up is pointless. Once your ROM is flashed after initial wiping all files are set in place and ready to go as the developer intended. Wiping caches and fixing permissions right after ROM intallation might offset the original boot sequence and cause issues.
Look at hate410s post for proof of this. He took these same steps, and a few more unneeded ones and he can't get a stable install to save his life.
If you wipe properly or run TDJs wipe gets the phone ready for any ROM installation and if done correctly will install the ROM as the developer intended. If you have issues up initial boot after wiping correctly, chances the flaw lies in the ROM itself. If that makes any sense. Its only logic.
Sent from my SAMSUNG-SGH-T989 using xda premium
RushAOZ said:
Sorry, but that's absolutely unnecessary and actually does cause issues.
To do these steps after the ROM has loaded and has been under use causes no issues and does fix any issues you might have. For example I just flashed cm10 nightly from fresh. After I had completely set up my phone and installed and restored app data I noticed my phone was charging extremely slow. Fixed permissions and everything's in order now. But wiping cache and fixing permissions immediately after flashing, without loading the ROM up is pointless. Once your ROM is flashed after initial wiping all files are set in place and ready to go as the developer intended. Wiping caches and fixing permissions right after ROM intallation might offset the original boot sequence and cause issues.
Look at hate410s post for proof of this. He took these same steps, and a few more unneeded ones and he can't get a stable install to save his life.
If you wipe properly or run TDJs wipe gets the phone ready for any ROM installation and if done correctly will install the ROM as the developer intended. If you have issues up initial boot after wiping correctly, chances the flaw lies in the ROM itself. If that makes any sense. Its only logic.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Lmao.. NO.. I'm not going to argue with you.. but your wrong and spreading miss information.
A uid mismatch fix, commonly referred to as a fix permission just makes sure the permissions are set correct.. it can't mess up anything..
and depending on what you have flashed and if you have or have not factory reset doing a cache wipe will ensure there will not be any conflicts in your dalvik cache.. also can't mess up anything..
I think you really should learn what these thing are and what they do before you make comments about them.
The fact that you think there is special things that can be messed up on first boot shows your lack of knowledge.. yes devs can have scripts run at boot, for example a zip alignment .. however regardless of if you did or did not do a wipe and fix perm these things will still run, they are just boot scripts.. lmao..
..
garth719 said:
+1 fixing permissions right after a fresh install does absolutely nothing. You have to do it once the rom has settled in. Just to prove, if you try to fresh install a ROM with twrp and hit fix permissions it will say ABORTED.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Doesn't say aborted for me... and I'm using twrp.. it does a permission fix with no issue..
And its been a recommended step since the G1.. but do what ya want..
Either way telling people not to do it or a chache wipe is still spreading bad information ..
PJcastaldo said:
Lmao.. NO.. I'm not going to argue with you.. but your wrong and spreading miss information.
A uid mismatch fix, commonly referred to as a fix permission just makes sure the permissions are set correct.. it can't mess up anything..
and depending on what you have flashed and if you have or have not factory reset doing a cache wipe will ensure there will not be any conflicts in your dalvik cache.. also can't mess up anything..
I think you really should learn what these thing are and what they do before you make comments about them.
The fact that you think there is special things that can be messed up on first boot shows your lack of knowledge.. yes devs can have scripts run at boot, for example a zip alignment .. however regardless of if you did or did not do a wipe and fix perm these things will still run, they are just boot scripts.. lmao..
Click to expand...
Click to collapse
First of all there's no need to get riled up. I've been on these forums and flashing phones since 2008. I think I know a thing or 2 about it.
As far as everything you said that could go wrong, to me is easily avoided with a full formatting of your partitions. If you have a clean canvas to work with, you should have 0 errors in your install. Unless the ROM itself has any flaws of course. And if that's the case you shouldn't be flashing it.
Well to each his own. I make these decisions based on the fact that I've owned about 7 android phones and not one developer or flash instruction I've read called for an immediate cache wiping and permission fix as soon as your ROM is installed. Not my G2, Epic 4g, GSII, Nexus S 4g, Evo 4g, Evo 3d, and the plethora of other phones L
I've flashed for people which include a Galaxy Nexus, Epic Touch 4g, Vibrant, GSIII and an international Galaxy S2.. Only on this phone.
And the reason I say it's unnecessary is because I'm one of those people that NEVER have issues except issues that are already established by the developer in the op.
I've flashed every ROM in this forums, using my flash instructions (which really aren't mine, it's just the old fashioned, right way to wipe) and every ROM has worked flawlessly with no freak errors.
To me, just making sure that you've properly formatted all your partitions is all the ROM needs to install and work as intended.
And it's been working like a charm for me since 2008. Take my word for it or not. But like I said. A simple, proper wipe is all you need to for a ROM to install error free. Look at my post history. You'll find 0 posts having to do with any issues that I'm not already supposed to have. I was even one of those people that haven't had an RR or SoDs since CM10 nightlies released. But like I said, to each his own.
Btw boot loops are one of the common issues people get when wiping cache and fixing permissions without letting the ROM boot up for the first time. You can find plenty of those in the TW rom threads.
Sent from my SAMSUNG-SGH-T989 using xda premium
01. Download ROM (Link is Below)
02. BACKUP ALL APPS with preferred method (ie: Rom Toolbox, Titanium, My Backup, etc..)
03. Place ROM on ROOT of your SD card. (ie: /sdcard)
04. Boot into Recovery Mode
05. Do a NAND BACKUP!!!
06. Flash DARKSIDE.SUPER.WIPE (OPTIONAL - ROM will do this by default)
07. Flash an ICS ready radio (Links below)
08. Flash ROM.
09. After flashing is complete, Reboot...
10. Let device sit for 10min without touching, then reboot.
11. Done!
These are flashing instructions from TDJ himself. Not only did he have the most popular rom for the T989 (with his Evolution v8 thread having more than 1.2 million views...) but he's widely considered the best dev this phone has ever had. Not only that he's not a new guy and has been around since the mytouch days. I don't see any instructions in there about wiping cache and fixing permissions immediately after ROM installation, do you?
RushAOZ said:
01. Download ROM (Link is Below)
02. BACKUP ALL APPS with preferred method (ie: Rom Toolbox, Titanium, My Backup, etc..)
03. Place ROM on ROOT of your SD card. (ie: /sdcard)
04. Boot into Recovery Mode
05. Do a NAND BACKUP!!!
06. Flash DARKSIDE.SUPER.WIPE (OPTIONAL - ROM will do this by default)
07. Flash an ICS ready radio (Links below)
08. Flash ROM.
09. After flashing is complete, Reboot...
10. Let device sit for 10min without touching, then reboot.
11. Done!
These are flashing instructions from TDJ himself. Not only did he have the most popular rom for the T989 (with his Evolution v8 thread having more than 1.2 million views...) but he's widely considered the best dev this phone has ever had. Not only that he's not a new guy and has been around since the mytouch days. I don't see any instructions in there about wiping cache and fixing permissions immediately after ROM installation, do you?
Click to expand...
Click to collapse
His roms are set up to run the cache wipe scripts automatically during a flash.. so yes it is doing a fix perm..
AND while i agree he is talented, I would not call him the best on our device. Especially when guys like whitehawx are around.. or Eugene.. or any of the other guys who have been around for YEARS.. but thats an opinion..
---------- Post added at 12:57 AM ---------- Previous post was at 12:55 AM ----------
RushAOZ said:
First of all there's no need to get riled up. I've been on these forums and flashing phones since 2008. I think I know a thing or 2 about it.
As far as everything you said that could go wrong, to me is easily avoided with a full formatting of your partitions. If you have a clean canvas to work with, you should have 0 errors in your install. Unless the ROM itself has any flaws of course. And if that's the case you shouldn't be flashing it.
Well to each his own. I make these decisions based on the fact that I've owned about 7 android phones and not one developer or flash instruction I've read called for an immediate cache wiping and permission fix as soon as your ROM is installed. Not my G2, Epic 4g, GSII, Nexus S 4g, Evo 4g, Evo 3d, and the plethora of other phones L
I've flashed for people which include a Galaxy Nexus, Epic Touch 4g, Vibrant, GSIII and an international Galaxy S2.. Only on this phone.
And the reason I say it's unnecessary is because I'm one of those people that NEVER have issues except issues that are already established by the developer in the op.
I've flashed every ROM in this forums, using my flash instructions (which really aren't mine, it's just the old fashioned, right way to wipe) and every ROM has worked flawlessly with no freak errors.
To me, just making sure that you've properly formatted all your partitions is all the ROM needs to install and work as intended.
And it's been working like a charm for me since 2008. Take my word for it or not. But like I said. A simple, proper wipe is all you need to for a ROM to install error free. Look at my post history. You'll find 0 posts having to do with any issues that I'm not already supposed to have. I was even one of those people that haven't had an RR or SoDs since CM10 nightlies released. But like I said, to each his own.
Btw boot loops are one of the common issues people get when wiping cache and fixing permissions without letting the ROM boot up for the first time. You can find plenty of those in the TW rom threads.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
again.. your spreading incorrect information and someone should take this information down.. Im glad you've been here a whopping year longer than I.. I have also owned several devices and have done a cache wipe and a fix perm after flashing since the beginning and it has NEVER cause an issue..
INFACT most of the time people report a boot loop the first thing they are told is to do a reboot and wipe cache and fix permission and it usually fixes the boot loop..
And here is an example from a different Devs thread ptmr, whos jedi roms are very popular..
Instructions
TWRP Recovery Recommended!
ALWAYS FULL WIPE!
-Download ROM
-Backup your apps with preferred method(app2zip is great)
-Nandroid
-Wipe data ( factory data reset)
-Wipe system (Format system (in mounts/storage) if on CWM)
-Flash ROM
-Wipe cache/Dalvik
-Fix Permissions
-(USE DARKSIDE CACHE SCRIPT IF STILL ON CWM RECOVERY)
-Boot system and DO NOT TOUCH FOR 10 MIN
-After the 10 min, reboot phone and enjoy the Mind Trick
-DO NOT RESTORE DATA!!!
PJcastaldo said:
His roms are set up to run the cache wipe scripts automatically during a flash.. so yes it is doing a fix perm..
AND while i agree he is talented, I would not call him the best on our device. Especially when guys like whitehawx are around.. or Eugene.. or any of the other guys who have been around for YEARS.. but thats an opinion..
---------- Post added at 12:57 AM ---------- Previous post was at 12:55 AM ----------
again.. your spreading incorrect information and someone should take this information down.. Im glad you've been here a whopping year longer than I.. I have also owned several devices and have done a cache wipe and a fix perm after flashing since the beginning and it has NEVER cause an issue..
INFACT most of the time people report a boot loop the first thing they are told is to do a reboot and wipe cache and fix permission and it usually fixes the boot loop..
And here is an example from a different Devs thread ptmr, whos jedi roms are very popular..
Instructions
TWRP Recovery Recommended!
ALWAYS FULL WIPE!
-Download ROM
-Backup your apps with preferred method(app2zip is great)
-Nandroid
-Wipe data ( factory data reset)
-Wipe system (Format system (in mounts/storage) if on CWM)
-Flash ROM
-Wipe cache/Dalvik
-Fix Permissions
-(USE DARKSIDE CACHE SCRIPT IF STILL ON CWM RECOVERY)
-Boot system and DO NOT TOUCH FOR 10 MIN
-After the 10 min, reboot phone and enjoy the Mind Trick
-DO NOT RESTORE DATA!!!
Click to expand...
Click to collapse
Yes, TDJs super wipe formats and wipes cache BEFORE ROM installation, not afterwards.
Like I said to each his own whatever works for you.
Also this info doesn't need to be taken down. Maybe those flashing steps apply to the Jedi ROMs specifically, because of you check all the other ROMs these steps aren't listed as necessary. Only the current crop of TW ROMs. So we both may be correct and in the end it probably doesn't matter. I've flashed the Jedi ROMs myself and didn't do anything other than flashing the superwipe script, flashing the ROM and reboot. No issues. The step might just be a precautionary measure.I know for a fact that with AOSP based ROMs the step is unnecessary. You don't even need to wait the initial 10 minute time like with TW ROMs either lol. Like I said whatever works for ya works man.
Happy flashing folks!
Sent from my SAMSUNG-SGH-T989 using xda premium
RushAOZ said:
Yes, TDJs super wipe formats and wipes cache BEFORE ROM installation, not afterwards.
Like I said to each his own whatever works for you.
Also this info doesn't need to be taken down. Maybe those flashing steps apply to the Jedi ROMs specifically, because of you check all the other ROMs these steps aren't listed as necessary. Only the current crop of TW ROMs. So we both may be correct and in the end it probably doesn't matter. I've flashed the Jedi ROMs myself and didn't do anything other than flashing the superwipe script, flashing the ROM and reboot. No issues. The step might just be a precautionary measure.I know for a fact that with AOSP based ROMs the step is unnecessary. You don't even need to wait the initial 10 minute time like with TW ROMs either lol. Like I said whatever works for ya works man.
Happy flashing folks!
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Ill agree with you when it comes to that waiting ten minutes thing.. I personally think its a myth..
but you still get a few of these..
And im sorry, im not trying to argue with you.. But neither you nor I are a dev, we are just flashers who have much knowledge.
Point being a cache wipe and a fix perm is not required, but WILL prevent issues and CAN NOT IN ANY WAY cause a problem.. your OP is wrong and should be edited to reflect that.
PJcastaldo said:
Ill agree with you when it comes to that waiting ten minutes thing.. I personally think its a myth..
but you still get a few of these..
And im sorry, im not trying to argue with you.. But neither you nor I are a dev, we are just flashers who have much knowledge.
Point being a cache wipe and a fix perm is not required, but WILL prevent issues and CAN NOT IN ANY WAY cause a problem.. your OP is wrong and should be edited to reflect that.
Click to expand...
Click to collapse
Haha you just made me remember a specific part of my claims I didn't mention. I should have clarified. I'm talking about flashing TDJs wipe cache immediately after flashing a ROM. I've done this myself and came up with boot loops. Which is probably due to CWM 6.0.1.4 AND 6.0.1.5s intolerance for the fixes TDJ included to fix the crap CWM 5.0.2.7 couldn't get done =D
Sent from my SAMSUNG-SGH-T989 using xda premium
RushAOZ said:
Haha you just made me remember a specific part of my claims I didn't mention. I should have clarified. I'm talking about flashing TDJs wipe cache immediately after flashing a ROM. I've done this myself and came up with boot loops. Which is probably due to CWM 6.0.1.4 AND 6.0.1.5s intolerance for the fixes TDJ included to fix the crap CWM 5.0.2.7 couldn't get done =D
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Which brings back the main point of your thread.. I am telling you that these kinds of scripts are not only made for our device, but many others as well. The reason those specific recovery's don't flash them properly is because they are borked...
PJcastaldo said:
Which brings back the main point of your thread.. I am telling you that these kinds of scripts are not only made for our device, but many others as well. The reason those specific recovery's don't flash them properly is because they are borked...
Click to expand...
Click to collapse
Nah the problem with the scripts isn't the scripts themselves. They're awesome! Who wouldn't want a on click solution to wiping their partitions? Its the fixes TDJ included to fix CWM 5.0.2.7s faults, which have been fixed in CWM 6+, which is why they cause issues. TWRP is immune to these fixes and they work perfectly. So to any users out there, if you have CWM 6+, do t use the wipes. Any TWRP users, the scripts work perfectly well and won't ruin anything. Thanks for helping me clarify that Castaldo. The recoveries used with our phones are very different and call for different flashing instructions. Which is the point to my post. Devs, please clarify this! And your threads won't be full of crazy issues that can easily be avoided lol
I'm busy working on some beer and liquor with friends ATM. Gonna get back to that lol
enjoy your weekend and happy flashing folks!
I'll fix the OP with these new changes ASAP.
Sent from my SAMSUNG-SGH-T989 using xda premium
The more you guys debate, the more we learn. I'm trying to think of a way to feed the fire.... lol
Sent from my SGH-T989 using xda app-developers app
bzlik88 said:
The more you guys debate, the more we learn. I'm trying to think of a way to feed the fire.... lol
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
feel free.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Phone is rooted now I need help with installing cyanogen mod.

Good day everyone.
I have successfully rooted my S3 1747.
I have done a backup after installing Rom manager. I also have a nandroid and titanium backup completed.
I would like to install cyanogen mod but its very important that I am able to get my contacts back.
I plan to install through the so called easy method in rom manager.
Am I able to get my stuff back after the install?
Thanks in advance
Most system app data will not be compatible. I don't know about CM, but in TW there's an option to export contacts to SD. It'll save them in a .CSV file. Maybe you can import them to CM contacts like this. Might want to confirm that first though.
Sent from my SAMSUNG-SGH-T999 using Tapatalk
Thanks for the reply. I'm going to do this later. Does cyanogen live up to the hype?
Everyone has their own preference. I personally like touchwiz better. There are plenty who would agree and disagree.
If you've got a nandroid backup of your current set up, its pretty easy to flash a bunch of different ones to see what you like, and then go back if none keep your interest.
Sent from my SAMSUNG-SGH-T999 using Tapatalk
Thanks again for the response and sorry for my late thanks. I was busy at work and overlooked the post.
Sent from my SGH-I747M using Tapatalk
You can use google to back up all contacts and restore them on any android with your google account on it....as for the install I believe our s3 is compatible with the cm installer
crazymonkey05 said:
You can use google to back up all contacts and restore them on any android with your google account on it....as for the install I believe our s3 is compatible with the cm installer
Click to expand...
Click to collapse
When you say cm installer. I assumes you are talking about the app and pc program that does everything automatically. It says my phone is compatible however wouldn't work originally. I had to root and use twrp. Can I use that to update from now on or should I continue to use twrp?
Sent from my SGH-I747M using Tapatalk
Edit - double post
Well for me cwm is the easiest to use as you just wipe and flash.....its purely up to you, if your gunna use twrp just download the zip boot recovery wipe system, cache, dalvik cache, data (factory reset), and hit install zip and bam you got cyanogen
I wouldn't wipe /system before a flash. If the rom fails to flash youll have no OS to boot into, and it can be a huge pain to get it back. If the rom does flash, its first step will be to format /system, so it gets done anyway.
I think this may be one of those things people used to have to do on some older devices, and was carried on to newer ones. I just think its an unneeded extra step, and more than a few times ended up taking a day or two to help people get their device working right again.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
DocHoliday77 said:
I wouldn't wipe /system before a flash. If the rom fails to flash youll have no OS to boot into, and it can be a huge pain to get it back. If the rom does flash, its first step will be to format /system, so it gets done anyway.
I think this may be one of those things people used to have to do on some older devices, and was carried on to newer ones. I just think its an unneeded extra step, and more than a few times ended up taking a day or two to help people get their device working right again.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
That's good advice that would have helped me a lot. All the instructions I followed online said to wipe/format everytime.
Sent from my SGH-I747M using Tapatalk
Yeah, its extremely common advice. I see it all the time. There are rare times when it is necessary to format system, but I dont feel a rom flash is one of them.
Its still possible to end up with no OS after a failed flash, but the chances are greatly decreased by eliminating that one step!
Sent from my SAMSUNG-SGH-I747 using Tapatalk

Categories

Resources