Hi. I have a rooted HTC One X international version with the quad core processor supposedly. 1.5ghz but when i checked quick system info it says my cpu clock is only running at 1.4ghz. I have set cpu installed and i have ensured that ive set the min and max to 1.5ghz but still it remains at 1.4ghz. I dont know if it was like this before i rooted my device or before i installed setcpu, or if this is just the way its supposed to be. Please advice.
If ever this is unusual, could someone tell me how to fix it? Should i reflash the kernel or bootloader?
Thanks in advance for ur help.
draftbeer89 said:
Hi. I have a rooted HTC One X international version with the quad core processor supposedly. 1.5ghz but when i checked quick system info it says my cpu clock is only running at 1.4ghz. I have set cpu installed and i have ensured that ive set the min and max to 1.5ghz but still it remains at 1.4ghz. I dont know if it was like this before i rooted my device or before i installed setcpu, or if this is just the way its supposed to be. Please advice.
If ever this is unusual, could someone tell me how to fix it? Should i reflash the kernel or bootloader?
Thanks in advance for ur help.
Click to expand...
Click to collapse
i tried it and the cpu range shows as 51 to 1500 no probs.
try cpu spy, then run a bench mark service, then go back to cpu spy and check if it reached 1500ghz
Oh, sorry if I got misunderstood. Setting the range is NOT the problem. I can set it just fine, and the profiles work well too. It's just that if I set the min and max to 1500mhz, the ACTUAL cpu clock (the large number on top of the min and max sliders) remains at 1400. When I lower/change the min max, the frequency lowers/changes accordingly. But, as I mentioned, the max ACTUAL cpu frequency remains at 1400mhz even though the sliders are already set to 1500mhz.
So, I want to know if that's normal. I read from somewhere that the maximum frequency for multi-core is 1400mhz and the maximum frequency for single core is 1500mhz. But I'm not sure though so I want to verify that information.
Thanks!
Related
cm7 said its default cpu speed is set at 1000mhz.. but when i use quadrant standrad/ quick system info to check my cpu range, it shows that my cpu is at 800MHz.. I have checked my settings both in the cyanogen settings and the boot menu.. i am choose 1000MHz .. but the cpu is still stick at 800MHz.. How can i turn it to 1000MHz, may i use setvsel ??
anyone help??
during bootup, press volume down key when you see the LED in "Blue". You can find a Overclock menu, adjust accordingly.
I notice Milestone OC, n SetVSel doesn't save settings on CM7-Defy
i have try that.. but the setting in bootmenu did not really apply ...
no matter i press set default or save..
Hi,
I'm using cm7-110615-1323-BOOT177-Jordan.zip and everything works as it should.
I'm using the widget called "Temp+CPU V2" from the Market and it showes clocks between 300 and 1000 MHz. CPU-load, Temp and used RAM also works fine.
Make sure you don't have your middle frequency set to 800. For some reason that was causing me similar problems, but all has been good since I changed the middle freq to 790...
dew.man said:
Make sure you don't have your middle frequency set to 800. For some reason that was causing me similar problems, but all has been good since I changed the middle freq to 790...
Click to expand...
Click to collapse
It doesnt work..my cpu and battery vsel setting still at the stock value.. which is 33/300,48/600,58,800
Sent from my MB525 using XDA App
When I look at system settings it shows the following
Current (300-1000)
Min (300)
Max (800)
Min is 300, Max is 800. However current has been 300 - 1000. So this measures the current setting and it can be higher than the 'max'.
Try another tool to measure your cpu freq, setvesl has a decent one.
Olly
can i ask 1 help how to overclock wfs rom is cm7........i go to cpu settings there
1)available governors
2)min cpu frequency
3)max cpu frequency
4)set on boot
------------------------------------------------------
in available governors
1)lagfree
2)lulzactive
3)lazy
4)braziliznwax
5)smartassv2
6)smartass
7)minmax
8)scary
9)smoothass
10)savagedzen
11)interactivex
12)conservati
13)ondemand
14)userspace
15)powersave
16)lionheart
17)performance
in this which 1 i have o chosse for fast my gameplay
and if make my max cpu to 806 it lags and contiusoly restarts....if i keep it to 787 its bit lagging .....min cpu frequency i hv kept is 200....which is the best frequency ??????
As governor smartass2 is often prefered.
Some phones do not work with maximum voltage and 804 MHz. You will have to reduce it till your phone is stable.
overclocking MAY damage your device. so be careful.
sorry for this old thread but, i have updated the last cm7 and now i can see more cpu states on setcpu such as 825,844 and 864..i overclocked for using these clocks but cpuspy says that these states are "unused"? Interestingly, setcpu says current state is 864 but not cpuspy? is that a bug?
Nice one, unearthing a thread from february ^^
Even if you select a high frequency, your phone might not be able to handle it.
-----------
"You can overclock as much as you want, your phone will always seem too slow."
Hi i have ARHD on my phone with the XM Kernel. I was slightly suprised in the Trickster MOD app, the max clock speed is 1.3ghz. Yes i know i can OC to 1.5 but im not sure what is setting this. When i had ARHD installed with stock kernel it was showing 1.3 as default. I assume that was set by the ROM. But i installed this kernel and still has 1.3 as the default.
Also the default govenor settings for the gaming one has the boost_freq set at 1300000, which is 1.3ghz, that can be changed to 1.5 also. But surely the boost freq would be the max freq no matter if you move the slider to 1.5 in the basic controls? But i would be suprised that the gaming govenor would underclock the cpu, surely for gaming you would want the phone maxed out?
Is this expected with the XM Kernel and the ARHD? And if so, is there any things i can change in the govenor settings to make sure it performs at absolute max?
It's kernel related; Xmisters' kernels since 188 have a hard cap(1.3Ghz) by default, but using trickster mod, or another o/c apk, you can raise it to the stock 1.5Ghz(tick 'set on boot' to ensure it stays at 1.5) The best settings are trial and error, tbh, I use touchdemand/sio though smartmax seems to be the best balance.
Thanks for the answer. i can change it to 1.5 easy enough, but if you look in the govenor control, the boost_freq is is set to 1300000. If i left it at that, would it prevent the cpu from going up to 1.5?
Danw20 said:
Thanks for the answer. i can change it to 1.5 easy enough, but if you look in the govenor control, the boost_freq is is set to 1300000. If i left it at that, would it prevent the cpu from going up to 1.5?
Click to expand...
Click to collapse
you have sleep (lowest CPU can go), ideal freq(the speed the CPU aims for while awake), touch poke (when you touch the screen), boost (what it boosts too to prevent lag) and max (CPU flat out)
Setting the boost to 1.3 will still allow the could to run at full speed.
Sent from my HTC One X using xda app-developers app
That makes sense, cheers. So its probably a good idea to leave it as it is then.
My cpu is scaling to 900mhz, any one can help me to fix this at 300 mhz. I tried a lot of apps but nothing change, is there a tool to modify the cpu freq in the kernel ?
U hv to root ur phone and then install SetCPU...then set the min frequency as 300 mhz
prabhuinbar said:
U hv to root ur phone and then install SetCPU...then set the min frequency as 300 mhz
Click to expand...
Click to collapse
I tried a lot of cpu apps, look no frills cpu, set spu etc.. But nothing change, see the attachment
in general section there is a thread with Thermal Config to prevent lagging and overheating by ravinder003
Use that thermal config
SH3H1 said:
in general section there is a thread with Thermal Config to prevent lagging and overheating by ravinder003
Use that thermal config
Click to expand...
Click to collapse
I deleted the red lines in the thermal config too but now i just want to set my cpu min to 300, i juste want to modify the cpu freq in the kernel
What cpu frequency to set for gaming and also for battery saving
In No-frills Cpu set Governor to powersave and also go to nofrills cpu settings and check prevent changes from other apps.
However it may cause unexpected behaviour like hangs and slow down so better stay bit above of 300Mhz.
alok932 said:
In No-frills Cpu set Governor to powersave and also go to nofrills cpu settings and check prevent changes from other apps.
However it may cause unexpected behaviour like hangs and slow down so better stay bit above of 300Mhz.
Click to expand...
Click to collapse
I tried but the cpu freq is not changing in the scaling_min freq, cpu is min is always scaling on 900, thanks for reply
Ferhat78 said:
I tried but the cpu freq is not changing in the scaling_min freq, cpu is min is always scaling on 900, thanks for reply
Click to expand...
Click to collapse
Delete the thermal engine file. Then go to /sys/devices/system/cpu/cpu0/cpufreq/
There you'll see two files at the bottom ~ scaling_max_freq and scaling_min_freq
Change the values in them. See if it works.
EDIT: Seems like you already tried it.
alok932 said:
In No-frills Cpu set Governor to powersave and also go to nofrills cpu settings and check prevent changes from other apps.
However it may cause unexpected behaviour like hangs and slow down so better stay bit above of 300Mhz.
Click to expand...
Click to collapse
zTweaked said:
Delete the thermal engine file. Then go to /sys/devices/system/cpu/cpu0/cpufreq/
There you'll see two files at the bottom ~ scaling_max_freq and scaling_min_freq
Change the values in them. See if it works.
EDIT: Seems like you already tried it.
Click to expand...
Click to collapse
Thabks for reply, but i can change the value of the cpu min scaling, it's impossible to change, i changed but after a reboot a have always 900mhz min
Ferhat78 said:
Thabks for reply, but i can change the value of the cpu min scaling, it's impossible to change, i changed but after a reboot a have always 900mhz min
Click to expand...
Click to collapse
Check apply on boot in no frills cpu. However it wont always stay on 300 bcoz its based on performance. if you want it to stay near to 300 always then reduce max freq. If it still doesnt work and you are on miui then change your rom...Try using mokee rom.
alok932 said:
Check apply on boot in no frills cpu. However it wont always stay on 300 bcoz its based on performance. if you want it to stay near to 300 always then reduce max freq. If it still doesnt work and you are on miui then change your rom...Try using mokee rom.
Click to expand...
Click to collapse
Tried kernel tuner 2014 and now the cpu is scaling on 300, thanks for reply everybody, thanks a lot for yours answers kernel tuner work perfectly but no frills cpu or setcpu doesnt work perfectly look like kernel tuner
Hi
Is it possible, as for today, to set minimum clock speed for GPU when device goes into deep sleep mode (screen turns black) ?
I suppose when phone screen switchess off, gpu speed runs at min speed (300mhz) ?. I would like it to be never less then 450mhz
I don't know, sorry. But you've made me curious, why would you want to keep the GPU running faster than needed, when the screen is off?
You need a custome kernel that supports that and a kernel app that can give the commands. Unless you are good with scripts and feel confident to change that manually.
Sent from my SM-G920T
G4 GPU minimum speeed is 180MHz and max 600MHz. I check it with faux clock but setting dont stick propertly.
RedOCtobyr said:
I don't know, sorry. But you've made me curious, why would you want to keep the GPU running faster than needed, when the screen is off?
Click to expand...
Click to collapse
It happens that the lowest frequency of gpu kills music played through bluetooth. Its unstable, music skips. I know this for a fact because on rooted lg g3 i played a little bit with it and when setting gpu to at least 350mhz in deep sleep music could be played flawlessly.
Anyways, thats what i wanna do with my G4 and seems when i'll root my phone forthcoming weekend i should be able to do it with "Faux123 Kernel Enhancement Pro"
It's available from google playstore. Anyone familiar with this tool ?
Finally..
İ find it that settings for gpu, with this setting, you will be able to change the frequency of the GPU in standby mode while the screen off, this setting was 300 mhz by default on my device, so the device was consuming too much battery in standby mode so I made the default standby frequency 180mhz, you can give it the frequency you want
My device is lg g4, gpu frequency range 180 mhz -600 mhz among,
download this program first
https://play.google.com/store/apps/details?id=com.gmail.gogoshopa5.cpusettingsgl
Needs root auhority
After go to gpu tab
Click on button then scroll down
You can see it default_pwrlevel
you can give this value the frequency that the GPU will use in standby mode
For Lg g4 5 equivalent of value 180 mhz
4 equivalent of value 300 mhz
3 equivalent of value 367 mhz
2 equivalent of value 450 mhz
1 equivalent of value 490 mhz
0 equivalent of value 600 mhz
https://i.imgyukle.com/2020/02/01/nkYpAq.png
Biber_Golge said:
Finally..
İ find it that settings for gpu, with this setting, you will be able to change the frequency of the GPU in standby mode while the screen off, this setting was 300 mhz by default on my device, so the device was consuming too much battery in standby mode so I made the default standby frequency 180mhz, you can give it the frequency you want
My device is lg g4, gpu frequency range 180 mhz -600 mhz among,
download this program first
https://play.google.com/store/apps/details?id=com.gmail.gogoshopa5.cpusettingsgl
Needs root auhority
After go to gpu tab
Click on button then scroll down
You can see it default_pwrlevel
you can give this value the frequency that the GPU will use in standby mode
For Lg g4 5 equivalent of value 180 mhz
4 equivalent of value 300 mhz
3 equivalent of value 367 mhz
2 equivalent of value 450 mhz
1 equivalent of value 490 mhz
0 equivalent of value 600 mhz
https://i.imgyukle.com/2020/02/01/nkYpAq.png
Click to expand...
Click to collapse
Everything is ok.. thanks for your help..
But I want more information and help...
In my device already available OpenCL GPU...
But shown my OpenCL GPU frequency 1 MHz.. how can I increase my OpenCL GPU frequency?..
Can you please help me ... please help me...