[Q] Create ODIN backup with CWM Backup(nandroid backup) - Galaxy Y GT-S5360 General

Hello All friend is possible to make odin install package from CWM (Nandroid backup) ??
if yes
please any one guide me .................
I'm Waiting For Great Great Great Reply..........

manoranjan2050 said:
Hello All friend is possible to make odin install package from CWM (Nandroid backup) ??
if yes
please any one guide me .................
I'm Waiting For Great Great Great Reply..........
Click to expand...
Click to collapse
no, not really, because Nandroid backs up the /system and /data partitions on filesystem basis, but Odin requires raw partition images.
It can be done by some ADB shell command or by writing a CMW zip by dd-ing the boot, system, data and cache partitions, and tar-ing it into proper format.
Busybox and root required...

i need
oh i need it b,coz my galaxy y duos after brick(install custom kernel) i'm installed ur package S6102 DDLA3 (great thanks for it my dear friend).......
now my device don't support kies for updating new firmware update also device software update not working......
http://forum.xda-developers.com/showthread.php?t=1640499
but my friend device now 2-3 update S6102 DDLD3 so i backed up using CWM if is it possible its really helping me ....................

If I understand well, Your friend's mobile is on stock ROM, and/or updated via KIES.
Then query the following data from your friend's mobile:
From dialer *#1234# current software versions, and PCODE from *2767*4387264636# !
If these are ok, then you can check the firmware available for download at
http://fus.nanzen.se. if yes, You can make your own pack by SplitFUS2 (in my sig)
If got any difficulties, post the info (SW ver and PCODE) here, and we'll help...!

PDA S6102DDLD4
PHONE S6102DDLD4
CSC S6102ODDLD2
PCODE GT-S6102SKAINU
DEVICE INFO
Sent from my GT-S6102 using xda premium

Doky73 said:
no, not really, because Nandroid backs up the /system and /data partitions on filesystem basis, but Odin requires raw partition images.
It can be done by some ADB shell command or by writing a CMW zip by dd-ing the boot, system, data and cache partitions, and tar-ing it into proper format.
Busybox and root required...
Click to expand...
Click to collapse
So with adb shell in cygwin or terminal emulator we can create file to install via odin with dd command and create tar file?
Yup i always read your thread sir so i know where the boot,data,cache,and system in device.
Sory for my bad english

savie said:
So with adb shell in cygwin or terminal emulator we can create file to install via odin with dd command and create tar file?
Yup i always read your thread sir so i know where the boot,data,cache,and system in device.
Sory for my bad english
Click to expand...
Click to collapse
yes friend plz guide me step by step how to do it...........
Sent from my GT-S6102 using xda premium

manoranjan2050 said:
PDA S6102DDLD4
PHONE S6102DDLD4
CSC S6102ODDLD2
PCODE GT-S6102SKAINU
DEVICE INFO
Sent from my GT-S6102 using xda premium
Click to expand...
Click to collapse
last question, your PCODE is also the same?
PCODE GT-S6102SKAINU
---------- Post added at 05:16 PM ---------- Previous post was at 05:12 PM ----------
savie said:
So with adb shell in cygwin or terminal emulator we can create file to install via odin with dd command and create tar file?
Yup i always read your thread sir so i know where the boot,data,cache,and system in device.
Sory for my bad english
Click to expand...
Click to collapse
- cygwin not required for this
- adb and terminal emulator is not preferably, because when you have ADB access, then your Androd is currently running, and there are a lot of open processes, files etc.
- most preferred way is to write a recovery script to dd and tar the required images.
If I had more time I would write it... maybe one day... ;-)

yes
Doky73 said:
last question, your PCODE is also the same?
PCODE GT-S6102SKAINU
Click to expand...
Click to collapse
Yes My PCODE is same.............. GT-S6102SKAINU

- cygwin not required for this
- adb and terminal emulator is not preferably, because when you have ADB access, then your Androd is currently running, and there are a lot of open processes, files etc.
- most preferred way is to write a recovery script to dd and tar the required images.
If I had more time I would write it... maybe one day... ;-)
Click to expand...
Click to collapse
i'm waiting for great guide any time u free time please guide me step by step....

Doky73 said:
last question, your PCODE is also the same?
PCODE GT-S6102SKAINU
---------- Post added at 05:16 PM ---------- Previous post was at 05:12 PM ----------
- cygwin not required for this
- adb and terminal emulator is not preferably, because when you have ADB access, then your Androd is currently running, and there are a lot of open processes, files etc.
- most preferred way is to write a recovery script to dd and tar the required images.
If I had more time I would write it... maybe one day... ;-)
Click to expand...
Click to collapse
Oh so we can do in recovery mode. Sound interest since i've try to learn about syntax in updater-script but i'm not proggramer and newbie in android so need more time to learn and hope you have time to write tutorial sir. thanks.

Related

Micromax A45 ROOTED!! (MTK 6573)

So, this is it! MICROMAX A45 has been rooted!! :laugh:
Things you would be needing:
1. SP flash tool -> ver 2.1 preffered (google it)
2. Download and extract my attatched .rar file.
3. Unlockroot (get it from www.unlockroot.com).
4. MTK drivers (download the attatchment from this xda post)
5. ADB drivers (No need to worry about, unlockroot will automatically setup the adb driver while rooting)
Ok so let's move on to the steps:
1. This rar file contains my modified boot.img & the A45 scatter file (needed by SP Tools, tells the SP tools which rom addresses to flash).
2. Install the MTK drivers, just run the InstallDriver.exe program inside the MTK folder).
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
5. When the phone boots up go to Settings->Applications->Development and tick mark "Enable Debugging".
6. Now attach your phone using the data cable.
7. Open Unlockroot program through windows start menu.
8. Click the big green root button.
9. It will ask for installing drivers, click "yes"...it's now installing the ADB drivers.
10. Finally it will root your phone and will ask you for rebooting the phone, click yes.
11. Let your A45 reboot.
Finally after booting, check the app drawer for an application "Superuser"...Congratulations!! your A45 is successfully rooted!!!...:highfive:
Credits:
Me!
Sahil Deep, gave me a link to an original boot.img of A45
Caution: You can softbrick your device if you play around much on "GOD MODE" (Superuser mode), know what you are doing and accept the consequences if you make your device unusable (although highly rare)..
ANY QUESTIONS?? DONT HESITATE TO ASK ME!! POST IT TO THE FORUM, NO PM!
&..hey press the 'thanks' button if u think i deserve it..:angel:
EDIT: I HAVE ALSO ATTATCHED THE ORIGINAL BOOT.IMG OF THE A45 FOR PEOPLE WHO WANT TO USE THE STOCK BOOT.IMG!
vshlkmr said:
So, this is it! MICROMAX A45 has been rooted!! :laugh:
Things you would be needing:
1. SP flash tool -> ver 2.1 preffered (google it)
2. Download and extract my attatched .rar file.
3. Unlockroot (get it from www.unlockroot.com).
4. MTK drivers (download the attatchment from this xda post)
5. ADB drivers (No need to worry about, unlockroot will automatically setup the adb driver while rooting)
Ok so let's move on to the steps:
1. This rar file contains my modified boot.img & the A45 scatter file (needed by SP Tools, tells the SP tools which rom addresses to flash).
2. Install the MTK drivers, just run the InstallDriver.exe program inside the MTK folder).
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
5. When the phone boots up go to Settings->Applications->Development and tick mark "Enable Debugging".
6. Now attach your phone using the data cable.
7. Open Unlockroot program through windows start menu.
8. Click the big green root button.
9. It will ask for installing drivers, click "yes"...it's now installing the ADB drivers.
10. Finally it will root your phone and will ask you for rebooting the phone, click yes.
11. Let your A45 reboot.
Finally after booting, check the app drawer for an application "Superuser"...Congratulations!! your A45 is successfully rooted!!!...:highfive:
Credits:
Me!
Sahil Deep, Indiedevers member, gave me a link to an original boot.img of A45
Caution: You can softbrick your device if you play around much on "GOD MODE" (Superuser mode), know what you are doing and accept the consequences if you make your device unusable (although highly rare)..
ANY QUESTIONS?? DONT HESITATE TO ASK ME!! POST IT TO THE FORUM, NO PM!
&..hey press the 'thanks' button if u think i deserve it..:angel:
Click to expand...
Click to collapse
New around here (xda-dev and Android hacking), so please be gentle if I ask a stupid question. Have read may recommendations that before flashing a new ROM, one should backup their current ROM and user-data, so that one can recover one's phone if it were to be bricked for some reason. However, looks like to be able to do that, you need to Root the device first. And this seems to be a vicious circle.
Wondering if some way of backing up original ROM exists, without needing to Root, and how did Sahil Deep / Indidevers manage to get the original boot.img !!
BTW, I am probably too sleep-deprived, because I cannot seem to find the "Thank" button !! Will definitely click it once I've had a chance to try out your method and succeeded. Until then (and until I find the darn button), please accept my gratitude.
problem
i am having problems in using sp flash;
could you please detail that whole topic plz plz...
i too own micromaxx a45.
Worked!!!
It worked n rooted.. can you plz upload the original boot.img file of a45? and i also need a cwm custom recovery for a45....
plz make a rom
anyone make a rom for Micromax a45
---------- Post added at 12:16 PM ---------- Previous post was at 11:59 AM ----------
any tweak for a45..?
---------- Post added at 12:21 PM ---------- Previous post was at 12:16 PM ----------
how to add thanks button
---------- Post added at 12:44 PM ---------- Previous post was at 12:21 PM ----------
fast
Thanks for original boot.img..... and clicked thanks button too
Recovery console doesn't load
I followed the instructions you've given and have successfully rooted my Micromax A45! now the problem is, i manually flashed the clockworkmod recovery image onto RECOVERY using the SP Flash Tool v2.1 and when i try to boot into recovery mode, it gets stuck at the logo(Superfone PUNK logo) and doesnt go further. Pls suggest a solution. Many thanks!:cyclops:
i have
I have boot.img
---------- Post added at 11:15 AM ---------- Previous post was at 11:11 AM ----------
vshlkmr said:
So, this is it! MICROMAX A45 has been rooted!! :laugh:
Things you would be needing:
1. SP flash tool -> ver 2.1 preffered (google it)
2. Download and extract my attatched .rar file.
3. Unlockroot (get it from www.unlockroot.com).
4. MTK drivers (download the attatchment from this xda post)
5. ADB drivers (No need to worry about, unlockroot will automatically setup the adb driver while rooting)
Ok so let's move on to the steps:
1. This rar file contains my modified boot.img & the A45 scatter file (needed by SP Tools, tells the SP tools which rom addresses to flash).
2. Install the MTK drivers, just run the InstallDriver.exe program inside the MTK folder).
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
5. When the phone boots up go to Settings->Applications->Development and tick mark "Enable Debugging".
6. Now attach your phone using the data cable.
7. Open Unlockroot program through windows start menu.
8. Click the big green root button.
9. It will ask for installing drivers, click "yes"...it's now installing the ADB drivers.
10. Finally it will root your phone and will ask you for rebooting the phone, click yes.
11. Let your A45 reboot.
Finally after booting, check the app drawer for an application "Superuser"...Congratulations!! your A45 is successfully rooted!!!...:highfive:
Credits:
Me!
Sahil Deep, Indiedevers member, gave me a link to an original boot.img of A45
Caution: You can softbrick your device if you play around much on "GOD MODE" (Superuser mode), know what you are doing and accept the consequences if you make your device unusable (although highly rare)..
ANY QUESTIONS?? DONT HESITATE TO ASK ME!! POST IT TO THE FORUM, NO PM!
&..hey press the 'thanks' button if u think i deserve it..:angel:
EDIT: I HAVE ALSO ATTATCHED THE ORIGINAL BOOT.IMG OF THE A45 FOR PEOPLE WHO WANT TO USE THE STOCK BOOT.IMG!
Click to expand...
Click to collapse
vishal this my profile sahil deep
CWM recovery for Micromax a45
Hi,
I had earlier posted about a problem i had with clockworkmod on Micromax a45, and i'm really happy to say I have solved it! i edited the recovery.img file and replaced the cwm-kernel with the a45 stock recovery kernel and voila! it works perfectly! I have attached the custom recovery img which can be flashed using the SPF Tool. BTW, can anyone suggest any good custom ROMs for micromax a45? Thank you.:laugh:
How to add a kernal to recovery.img
prashanthca said:
Hi,
I had earlier posted about a problem i had with clockworkmod on Micromax a45, and i'm really happy to say I have solved it! i edited the recovery.img file and replaced the cwm-kernel with the a45 stock recovery kernel and voila! it works perfectly! I have attached the custom recovery img which can be flashed using the SPF Tool. BTW, can anyone suggest any good custom ROMs for micromax a45? Thank you.:laugh:
Click to expand...
Click to collapse
I am new to this thread but I just wanted to know how to edit recovery.img files I could not repack them using perl scripts please help.I have the whole romdump of A45
Repack img file
ayush.gaud said:
I am new to this thread but I just wanted to know how to edit recovery.img files I could not repack them using perl scripts please help.I have the whole romdump of A45
Click to expand...
Click to collapse
[THIS ONLY WORKS IN LINUX]
extract the zip file to the folder where you've unpacked the img file and modified it. open terminal, change the directory to that folder and type in
./mkbootimg --cmdline 'no_console_suspend=1 console=null' --kernel name-of-the-kernel --ramdisk name-of-the-ramdisk.gz -o recovery-new.img
how to install clockworkmod on micromax a45
Hi... Iam new to this forum and please tell me how to install clockworlmod recovery on my micromax a45 (rooted). Please Help me.
And thanx for the rooting information.
Custom Rom
prashanthca said:
[THIS ONLY WORKS IN LINUX]
extract the zip file to the folder where you've unpacked the img file and modified it. open terminal, change the directory to that folder and type in
./mkbootimg --cmdline 'no_console_suspend=1 console=null' --kernel name-of-the-kernel --ramdisk name-of-the-ramdisk.gz -o recovery-new.img
Click to expand...
Click to collapse
thanks for your reply. I would also like to know how we can port any other rom to our device or create update.zip I have tried on many roms but unsuccessful.
Porting
ayush.gaud said:
thanks for your reply. I would also like to know how we can port any other rom to our device or create update.zip I have tried on many roms but unsuccessful.
Click to expand...
Click to collapse
CHeck this out: [GUIDE] How to port Stock/GB/CM7/CM9/ICS/CM10/JB Based ROMs [Update: Sept.25.2012] - xda-developers
Also, can you upload the romdump and post the link?
unpack repack boot.img
prashanthca said:
[THIS ONLY WORKS IN LINUX]
extract the zip file to the folder where you've unpacked the img file and modified it. open terminal, change the directory to that folder and type in
./mkbootimg --cmdline 'no_console_suspend=1 console=null' --kernel name-of-the-kernel --ramdisk name-of-the-ramdisk.gz -o recovery-new.img
Click to expand...
Click to collapse
I have tried this command it says could not load boot.img-kernal I think I need another tool(or script) for unpacking and repacking can you please upload the tool you have used.
I will soon upload romdump link.
---------- Post added at 06:33 PM ---------- Previous post was at 06:27 PM ----------
I am new to this thread so can you please help me how to unpack repack boot.img I am getting error could not load kernel 'boot.img-kernal' I am trying to port custom roms so please help
---------- Post added at 06:41 PM ---------- Previous post was at 06:33 PM ----------
jayachar88 said:
New around here (xda-dev and Android hacking), so please be gentle if I ask a stupid question. Have read may recommendations that before flashing a new ROM, one should backup their current ROM and user-data, so that one can recover one's phone if it were to be bricked for some reason. However, looks like to be able to do that, you need to Root the device first. And this seems to be a vicious circle.
Wondering if some way of backing up original ROM exists, without needing to Root, and how did Sahil Deep / Indidevers manage to get the original boot.img !!
BTW, I am probably too sleep-deprived, because I cannot seem to find the "Thank" button !! Will definitely click it once I've had a chance to try out your method and succeeded. Until then (and until I find the darn button), please accept my gratitude.
Click to expand...
Click to collapse
I have romdump of A45 we can use psneuter and romdump to backup roms without root and same way we can root phone without any unsecure boot.img I did it the same way and succeeded.
prashanthca said:
Hi,
I had earlier posted about a problem i had with clockworkmod on Micromax a45, and i'm really happy to say I have solved it! i edited the recovery.img file and replaced the cwm-kernel with the a45 stock recovery kernel and voila! it works perfectly! I have attached the custom recovery img which can be flashed using the SPF Tool. BTW, can anyone suggest any good custom ROMs for micromax a45? Thank you.:laugh:
Click to expand...
Click to collapse
can u make a cwm recovery for a52 too???
hi i am using micromax a52 can u tell me...how to get clockwork recovery ...i tried to do it with builder colckworkmod.com...i got 4 file and.one named...recovery.img...what can i do now...i try to flash it with...uncle tool but...when i flash it it stuck on superfone aisha logo....plz help thnks in advance
Sent from my A52 using xda app-developers app
port cwm
psychopac said:
can u make a cwm recovery for a52 too???
Click to expand...
Click to collapse
Yes, if you can provide me the stock recovery.img of a52. But i'm not certain it'll work 100%, because a friend of mine tried the same method for micromax a56 and could not get it to work.
ttp://db.tt/s3a5l4dX. here is the drop box link of stock recovery.img
Sent from my A52 using xda app-developers app
prashanthca said:
Yes, if you can provide me the stock recovery.img of a52. But i'm not certain it'll work 100%, because a friend of mine tried the same method for micromax a56 and could not get it to work.
Click to expand...
Click to collapse
plz check thos..i upload it on dropbox...
send from mah rooted a52

[ROM] 6.2.B.0.200 - CWM Image and Testkey FTF

Hey,
someone sended me this rom, it can only be flashed on BROWN devices, testkey signed.
But i think it can be flashed like last leak, in recoveymode flash partition and boot
So here is it, have fun with it!
To use this ROM you need either a BROWN (PROTOTYPE/TESTING) or a UNLOCKED Device with CWM installed!
FTF: only for prototypes/brown devices
http://ul.to/iyw3amxh
NO MIRRORS please!
CWM Method (prerooted + Advanced StockKernel from Doomlord included): [Update: Changed to "normal" update.zip]
Download this file:
Mirror 1: http://ul.to/lb0m55r2
Mirror 2: http://clz.to/i69mm7dd
NO MIRRORS PLEASE
Flash the "LT26i-6.2.B.0.200-update.zip" with the option "Install zip from sideload" or "Install zip from SD" and reboot - Done
First boot may take some time, if after 5 minutes phone is not boot up, then go to fastboot and flash the attached userdata.sin with fastboot (fastboot flash userdata userdata.sin).
Screenshot in attachement!
@DooMLoRD has made a AdvancedStock Kernel already:
http://forum.xda-developers.com/showthread.php?p=41824768&posted=1#post41824768
Sidenote:
If you have the "old" CWM package (restore the backup) and you get md5sum mismatch then do this: (thanks @Envious_Data)
If you have Superuser problems do this:
http://forum.xda-developers.com/showthread.php?p=41835933
adb shell
cd /sdcard/clockworkmod/backup/2013-05-25.14.36.55
rm nandroid.md5
md5sum *img > nandroid.md5
md5sum *tar* >> nandroid.md5
Click to expand...
Click to collapse
Regards
Thanks, downloading now, please could someone give me detailed info on how to install this? Do I make a zip file from this FTF? Any things to do while in recovery?
I would suggest like this:
Use flashtool and extract the ext4 part from system.sin
then push system.ext4 to phone
in recovery shell do:
dd if=/path/to/system.sin of=/dev/block/insertblockdeviceofsystempartitionhere
after that reboot to fastboot and
fastboot flash boot kernel.sin
then maybe also erase userdata from fastboot and cross your fingers
This is NOT a proper instruction to do this, only a first way i would start
Another way would be to mount the system.sin on your pc and create a proper update.zip from it =)
Regards
deleted
Question is, is it safe to do so.
I am chargin my Xperia S actually.
So worst case is that you would need to reflash a older firmware with flashtool
Regards
Bin4ry said:
I would suggest like this:
push system.sin to phone.
in recovery shell do a
dd if=/path/to/system.sin of=/dev/block/insertblockdeviceofsystempartitionhere
after that reboot to fastboot and
fastboot flash boot kernel.sin
then maybe also erase userdata from fastboot and cross your fingers
This is NOT a proper instruction to do this, only a first way i would start
Another way would be to mount the system.sin on your pc and create a proper update.zip from it =)
Regards
Click to expand...
Click to collapse
Thank you, but do not understand fully what is necessary ( a step by step guide would be helpful) and I am afraid of bricking my phone... Why use fastboot to push all files, and not use flashtool? and what is the second thing you do (in recovery shell do a...)
Wow... Nice. Man
Please share the link 4share
the.ka said:
Please share the link 4share
Click to expand...
Click to collapse
No, no mirrors please!
I will upload a recovery backup soon. For all who dont know how to make it run theirselve!
let's wait doomlord to make a cwm flashable + root + busybox version
Bin4ry said:
No, no mirrors please!
I will upload a recovery backup soon. For all who dont know how to make it run theirselve!
Click to expand...
Click to collapse
Oh,sorry!!!
SO your saying
So what your saying is it may not work on a normal xperia?
well im not sure if this would help but my Xperia S is realy weird.... no serial numbers on my XS
@DooMLoRD
Sent from my LT26i using xda app-developers app
Waiting for news! =O
Be patient some minutes =)
Bin4ry screenshots plz
vertyogo said:
Bin4ry screenshots plz
Click to expand...
Click to collapse
did you read? Be patient
wait to Bin4ry please
Bin4ry said:
Be patient some minutes =)
Click to expand...
Click to collapse
Hope it'll not be uploaded.net again, it's very difficult to download from this host
Bin4ry said:
Hey,
someone sended me this rom, it can only be flashed on BROWN devices, testkey signed.
But i think it can be flashed like last leak, in recoveymode flash partition and boot
So here is it, have fun with it!
http://ul.to/iyw3amxh
NO MIRRORS please!
Regards
Click to expand...
Click to collapse
Hí!
I'm using original 55 ICS rom on my phone. The bootloader is locked.
Can I install this rom using flashtool?
Thx
petipetya

[Q] how to extract boot.img from phone

I'm currently using LOG F180K, I have updated to the latest version, V20n. Now I want to extract the kernel file - boot.img from phone. I know that using the command:
dd if = / dev/block/mmcblk0p4 of = / sdcard / boot.img
But it is used for other models, do not know the name Optimus G What is the block?
phamluong92 said:
I'm currently using LOG F180K, I have updated to the latest version, V20n. Now I want to extract the kernel file - boot.img from phone. I know that using the command:
dd if = / dev/block/mmcblk0p4 of = / sdcard / boot.img
But it is used for other models, do not know the name Optimus G What is the block?
Click to expand...
Click to collapse
I was suppose to open a topic with this kind of query. Did you by the way know how to create a system dump using Terminal Emulator?
For our device boot partition is /dev/block/mmcblk0p7... To knw abt more partitions use root Explorer and chk in this path /dev/block/platform/msm_sdcc.1/by-name
To take system dump run these command...
su
tar -c /system/* >> /sdcard/system.tar
Wait for some mins to finiah the process.. :thumbup::thumbup:
Sent from my LG-E975 using xda premium
hasan4791 said:
For our device boot partition is /dev/block/mmcblk0p7... To knw abt more partitions use root Explorer and chk in this path /dev/block/platform/msm_sdcc.1/by-name
To take system dump run these command...
su
tar -c /system/* >> /sdcard/system.tar
Wait for some mins to finiah the process.. :thumbup::thumbup:
Sent from my LG-E975 using xda premium
Click to expand...
Click to collapse
Wow! Thanks for the useful tip!! :good:
---------- Post added at 12:09 PM ---------- Previous post was at 11:47 AM ----------
hasan4791 said:
For our device boot partition is /dev/block/mmcblk0p7... To knw abt more partitions use root Explorer and chk in this path /dev/block/platform/msm_sdcc.1/by-name
To take system dump run these command...
su
tar -c /system/* >> /sdcard/system.tar
Wait for some mins to finiah the process.. :thumbup::thumbup:
Sent from my LG-E975 using xda premium
Click to expand...
Click to collapse
Will I just copy the command and paste it in Terminal Emu? Tried it but it said that tar not found.
MitoTakatori said:
Wow! Thanks for the useful tip!! :good:
---------- Post added at 12:09 PM ---------- Previous post was at 11:47 AM ----------
Will I just copy the command and paste it in Terminal Emu? Tried it but it said that tar not found.
Click to expand...
Click to collapse
It shud wrk..... I tried juz now....
Sent from my LG-E975 using xda premium
hasan4791 said:
It shud wrk..... I tried juz now....
Sent from my LG-E975 using xda premium
Click to expand...
Click to collapse
Can you again post the command? Please check the SS:
MitoTakatori said:
Can you again post the command? Please check the SS:
Click to expand...
Click to collapse
ya tar command is missing from /xbin folder of urs...
Extract and copy the below file to system/xbin and chk if its working...
hasan4791 said:
ya tar command is missing from /xbin folder of urs...
Extract and copy the below file to system/xbin and chk if its working...
Click to expand...
Click to collapse
Will be trying now..thanks! BTW. why the heck tar is missing in my system? Is it bad?
Will it display a message that confirms if the command execution is successful?
---------- Post added at 01:54 PM ---------- Previous post was at 01:24 PM ----------
hasan4791 said:
ya tar command is missing from /xbin folder of urs...
Extract and copy the below file to system/xbin and chk if its working...
Click to expand...
Click to collapse
It runs, but the system.tar contains no data. How can I know if it's working?? And if it's finished or not?
MitoTakatori said:
I was suppose to open a topic with this kind of query. Did you by the way know how to create a system dump using Terminal Emulator?
Click to expand...
Click to collapse
i had system dump. it have name: system.zip. But it didn't include boot.img. And, i try uses kitchen to build rom, when i flash zip, error: status 0. how to fix it?
phamluong92 said:
I'm currently using LOG F180K, I have updated to the latest version, V20n. Now I want to extract the kernel file - boot.img from phone. I know that using the command:
dd if = / dev/block/mmcblk0p4 of = / sdcard / boot.img
But it is used for other models, do not know the name Optimus G What is the block?
Click to expand...
Click to collapse
How's the v20n of F180K? Is it 4.2.2 already or still 4.1? Some people says that the new version has already updated to 4.2 but I doubt? Can you confirm this?
turvat1377 said:
How's the v20n of F180K? Is it 4.2.2 already or still 4.1? Some people says that the new version has already updated to 4.2 but I doubt? Can you confirm this?
Click to expand...
Click to collapse
So sad. It's 4.1.2. Of course, version V20n have some update.
phamluong92 said:
So sad. It's 4.1.2. Of course, version V20n have some update.
Click to expand...
Click to collapse
Thanks for confirming..

[Find7a] [X900x] CWM Base Recovery 6.0.3.7 + TWRP + Easy ROOT Method

Install ClockworkMod Recovery 6.0.3.7 (CWM) or Team Win Recovery Project (TWRP) on Oppo Find 7a FHD (X900x) + Easy ROOT Method
Warning: Note: No one but yourself is responsible for what you do to your device.
X9007 = Chinese TD-LTE support // X9006 = EU FDD-LTE or US FDD-LTE support
Requirements:
Download / unzip the file --> AndroidSDKSlim.zip
Download one of the following two files --> X9007_CWM_recovery.im OR X9007_TWRP_recovery.img
Make sure you have a charged battery (50 % minimum)
How to install: ​
Connect your phone to your PC. You should see a window with the drivers in an application called 'setup.exe '.
Start the installation process and wait until it ends. then disconnect the phone from the PC.
Extract the contents of the file ' AndroidSDKSlim.zip ' on your desktop. You should have a folder named ' android-sdk-windows ' where there is another folder: 'platform-tools.'
In this folder, move the two .img files you downloaded ( X9007_TWRP_recovery.img X9007_CWM_recovery.img )
​
Turn off your mobile.
Restart your mobile in fastboot mode by pressing the High Volume + Power buttons until the appearance of the word ' Fastboot ' .
Connect your phone to your PC via the USB cable.
In platform-tools folder 'with your mouse, do' right click 'while holding down the 'Shift ' button, then select ' Open a command window here . '
​
In this window, type the following code to verify that your device is recognized.
Code:
fastboot devices
​
Then type the following command to install the TWRP or CWM :
For the TWRP
Code:
fastboot flash recovery X9007_TWRP_recovery.img
For the CWM
Code:
fastboot flash recovery X9007_CWM_recovery.img
​
Once the process is finished, disconnect your phone from your computer, then simultaneously press the buttons ' power ' and 'volume down ' until you feel a vibration.
Your phone will reboot into your new custom recovery.
Select ' reboot system now ' to reboot your phone !
How to root : ​
Just download the attached file --> UPDATE-SuperSU-v1.94.zip
Copy/paste it on your memory phone
Reboot into recovery mode
Flash the file & next reboot your phone
Enjoy ! You're root !
Video : Root method & Flashing Custom recovery by C4ETech
Note
If you don't want to root your phone by this way,(With CUSTOM Recovery) you can see this Thread -->> ROOT method with OPPO Recovery Stock
Credits & Thanks
Dees_Troy
jmz
mazwoz
sammycakes
Chainfire
C4ETech
TonyStark​
Your feedback is welcome​ ​
Stock OPPO recovery
Flashable ZIP file --> oppo_recovery_v1.0.20140421-find7a.zip
Flash the ZIP file using TWRP or CWM recovery
Fastboot method IMG file --> oppo_recovery_v1.0.20140421-find7a.img
Flash the IMG file with this fastboot command :
Code:
fastboot flash recovery oppo_recovery_v1.0.20140421-find7a.img
Does this work for the X9006 international model?
Gesendet von meinem MI 2 mit Tapatalk
MrColdbird said:
Does this work for the X9006 international model?
Gesendet von meinem MI 2 mit Tapatalk
Click to expand...
Click to collapse
Hi,
Yes I think there is not difference betwen the X9007 & X9006. Need confirmation to be sure. Wait for first feedbacks. There is Only frequency bands difference I think...
X9007 = Chinese TD-LTE support
X9006 = EU FDD-LTE or US FDD-LTE support
should do a linux version. I rooted mine once i got it lol
Nice one! Now all I need is for the phone to arrive Was worried about whether there would be any development going on but it seems I was concerned about nothing.
Cheers.
Can anyone post a nandroid backup of the international model
i want to try it on my chineese model in order to get frznch language fully working
Actually i use morelocale 2 but some stuff are still in english
Thanks
Sent from my X9007 using xda app-developers app
houz said:
Can anyone post a nandroid backup of the international model
i want to try it on my chineese model in order to get frznch language fully working
Actually i use morelocale 2 but some stuff are still in english
Thanks
Sent from my X9007 using xda app-developers app
Click to expand...
Click to collapse
How about trying to install the ColorOS 2.0 International Beta? Includes French (as well as Google Play Services and is rooted)
Thank you!
im from Viet Nam.
Can i copy your post to devteam sir?
mrkimi84 said:
Thank you!
im from Viet Nam.
Can i copy your post to devteam sir?
Click to expand...
Click to collapse
Hello
If you give credits yes
Wipe
Is it Wipe ?
Are Oppo's update still available ?
Thanks
Any update on this being safe for the X9006 yet?
Got my phone today!!!
Just wanted to confirm the TRWP push worked great on my X9006 last night. Used included SuperSU to root and I'm all set! Well at least until the custom ROMs start flowing
No change in performance or anything?
Sent from my X9006 using XDA Free mobile app
jgunna405 said:
No change in performance or anything?
Click to expand...
Click to collapse
No change.
If anything a bit faster since I used TiBu to uninstall some stock system junk.
I will warn you though, with TWRP you can't run the stock OS updates (and one was released just this morning).
I'm hoping somebody will be able to find a way around that shortly with a custom zip for TWRP containing the updates though.
Dang, just opened up my phone, came to XDA to root so I can restore my saved apps and delete some system apps but now I can't get the OTA lol. Oh well, only a matter of time until the newest OTA is available via a flashable zip or at the least we can flash the stock recovery so we can OTA.
Yeah, no insult to this work which is great to have but for the moment I figured we were more likely to see a factory bug fix or two like the one that just got pushed before omni hits primetime so I decided to use the kedros method for now.
Hi eveybody
I Added the link towards second ROOT method on first post
Hope You'll like it
I believe with the OTA that went out since then, this custom recovery method may be invalid. I cannot flash CWM or TWRP using your method described above
(tried to share the image on dropbox, but not letting me for some reason. Here is a copy and paste of what I am getting) -
Directory of C:\TEMP\AndroidSDKSlim\android-sdk-windows\platform-tools
05/07/2014 10:07 AM <DIR> .
05/07/2014 10:07 AM <DIR> ..
05/07/2014 10:03 AM 819,200 adb.exe
05/07/2014 10:03 AM 96,256 AdbWinApi.dll
05/07/2014 10:03 AM 60,928 AdbWinUsbApi.dll
05/07/2014 10:03 AM <DIR> api
05/07/2014 10:03 AM 160,256 fastboot.exe
05/07/2014 10:03 AM 727,881 NOTICE.txt
05/07/2014 10:03 AM 16,654 source.properties
05/07/2014 10:03 AM <DIR> systrace
05/07/2014 10:05 AM 13,877,248 X9007_CWM_recovery.img
05/07/2014 10:07 AM 15,233,024 X9007_TWRP_recovery.img
8 File(s) 30,991,447 bytes
4 Dir(s) 181,535,727,616 bytes free
C:\TEMP\AndroidSDKSlim\android-sdk-windows\platform-tools>fastboot devices
8e72e3fc fastboot
C:\TEMP\AndroidSDKSlim\android-sdk-windows\platform-tools>fastboot flash recover
y x9007_CWM_recovery
error: cannot open 'x9007_CWM_recovery'
C:\TEMP\AndroidSDKSlim\android-sdk-windows\platform-tools>fastboot flash recover
y X9007_CWM_recovery
error: cannot open 'X9007_CWM_recovery'
C:\TEMP\AndroidSDKSlim\android-sdk-windows\platform-tools>fastboot flash recover
y X9007_TWRP_recovery
error: cannot open 'X9007_TWRP_recovery'
Hi
I dont know try with another computer. @seanpr123 has confirmed that the TWRP works
Envoyé de mon GT-I9305 en utilisant Tapatalk

LG Docomo Disney DM01G THREAD

Hello
I recently got my hand on a device which is specific to Japan which is called LG Disney by Docomo. Find about it HERE
I am interested to help people around to see what can be done with this device. I do not own it personally so I can not do much.
Here is the opensource for the device.
http://opensource.lge.com/osSch/list?types=ALL&search=Dm01G
I have also made a complete dump of the system and will see if someone is interested in version LGDM01G10B
I am looking for the latest LGDM01G10E system dump or something that can be used to extract the dump or used to make a KDZ file.
Dump updated for users.
Update about how to flash it coming soon.
Check here for DUMP
https://forum.xda-developers.com/showpost.php?p=79244517&postcount=13
System Dump with all partitions
All partitions except System
https://mega.nz/#!W80zxCSZ
system dump
https://mega.nz/#!C9EC2AyA
WITH KEYS
https://forum.xda-developers.com/showpost.php?p=79244517&postcount=13
Rough Guides
http://forum.xda-developers.com/showthread.php?t=2582142
http://forum.xda-developers.com/android/general/unbrick-lg-model-download-recovery-t3060184
This is for some other tab so make sure change the directory accorrdingly
Extract and place it onto your sd card!. Make sure all files are under /sdcard/* directory. Boot into the recovery, go to wipe -> advanced wipe -> wipe everything except sd card and internal storage. In recovery, go to advanced, then terminal. Folders should pop on the screen but do not go to any different directory, just press select. Now you should be in the terminal. Now, I'm really sorry but it will take some time, you have to enter each of this commands separately into the terminal:
Code:
dd if=/sdcard/V40010C/bootloader/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot
dd if=/sdcard/V40010C/bootloader/factory.bin of=/dev/block/platform/msm_sdcc.1/by-name/factory
dd if=/sdcard/V40010C/bootloader/laf.bin of=/dev/block/platform/msm_sdcc.1/by-name/laf
dd if=/sdcard/V40010C/bootloader/rpm.bin of=/dev/block/platform/msm_sdcc.1/by-name/rpm
dd if=/sdcard/V40010C/bootloader/sbl1.bin of=/dev/block/platform/msm_sdcc.1/by-name/sbl1
dd if=/sdcard/V40010C/bootloader/sdi.bin of=/dev/block/platform/msm_sdcc.1/by-name/sdi
dd if=/sdcard/V40010C/bootloader/tz.bin of=/dev/block/platform/msm_sdcc.1/by-name/tz
dd if=/sdcard/V40010C/boot.bin of=/dev/block/platform/msm_sdcc.1/by-name/boot
dd if=/sdcard/V40010C/cust.bin of=dev/block/platform/msm_sdcc.1/by-name/cust
dd if=/sdcard/V40010C/modem.bin of=/dev/block/platform/msm_sdcc.1/by-name/modem
dd if=/sdcard/V40010C/persist.bin of=/dev/block/platform/msm_sdcc.1/by-name/persist
dd if=/sdcard/V40010C/system.img of=/dev/block/platform/msm_sdcc.1/by-name/system
Remember only system is an img file! It is about 2,5GB so to flash it will take about 5-10 min.
Once you flashed everything you can reboot, in my case it said that OS is not installed but the recovery didn't know yet that we just flashed it. So just swipe to reboot and tablet should boot up with 4.4.2 !
Hnk1 said:
System Dump with all partitions
All partitions except System
https://mega.nz/#!W80zxCSZ
system dump
https://mega.nz/#!C9EC2AyA
Click to expand...
Click to collapse
sir your files are decryption..... are these a paid files
zahid.ali.83 said:
sir your files are decryption..... are these a paid files
Click to expand...
Click to collapse
No. Let me provide you key as well
Hnk1 said:
System Dump with all partitions
Hello,bro
Some error occurred during flashing REC, my DM-01G become brick.
Need to flash LG DOCOMO DM-01G to Stock ROM.
Would you please provide the KDZ format ROM file?
Thank you so much!
Click to expand...
Click to collapse
Hnk1 said:
System Dump with all partitions
And your files are decryption, plz help!
---------- Post added at 03:55 PM ---------- Previous post was at 03:50 PM ----------
zahid.ali.83 said:
sir your files are decryption..... are these a paid files
Click to expand...
Click to collapse
"All partitions except System"
Hi bro, would you send me these files?
thanks you so much!
Click to expand...
Click to collapse
biosct said:
Hnk1 said:
System Dump with all partitions
And your files are decryption, plz help!
---------- Post added at 03:55 PM ---------- Previous post was at 03:50 PM ----------
"All partitions except System"
Hi bro, would you send me these files?
thanks you so much!
Click to expand...
Click to collapse
I don't have a kdz. I made a backup of this device when i had the device which i borrowed from a friend.
However if you still need the files, i can send you the link
Click to expand...
Click to collapse
Hnk1 said:
biosct said:
I don't have a kdz. I made a backup of this device when i had the device which i borrowed from a friend.
However if you still need the files, i can send you the link
Click to expand...
Click to collapse
Bro, Thank you so much!
Would you please send me the link?
---------- Post added at 03:33 PM ---------- Previous post was at 03:25 PM ----------
Hnk1 said:
biosct said:
I don't have a kdz. I made a backup of this device when i had the device which i borrowed from a friend.
However if you still need the files, i can send you the link
Click to expand...
Click to collapse
https://mega.nz/#!W80zxCSZ
this link is decryption, please help!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
App storage issues
Hi! Just get the phone. Anyone knows how to move an app from internal storage to SD? Or if I wanna try root. What program can root this phone? Thanks
Please provide the decryption key for your MEGA links I want to explore the system partition
Hnk1 said:
System Dump with all partitions
All partitions except System
https://mega.nz/#!W80zxCSZ
system dump
https://mega.nz/#!C9EC2AyA
Click to expand...
Click to collapse
brother share decryption key for these files
pchacker47 said:
brother share decryption key for these files
Click to expand...
Click to collapse
sorry it took some time. I was travelling and could not reply sooner
https://mega.nz/#!W80zxCSZ!XnvKXhruRu0fKulHyTowbOz7k4srM2x0EMr1ap_KtGk
https://mega.nz/#!C9EC2AyA!zxTQbpczRhGqWXZeHjsdFRGGtFQs43WpBz2ng0Evg78

Categories

Resources