So, this is it! MICROMAX A45 has been rooted!! :laugh:
Things you would be needing:
1. SP flash tool -> ver 2.1 preffered (google it)
2. Download and extract my attatched .rar file.
3. Unlockroot (get it from www.unlockroot.com).
4. MTK drivers (download the attatchment from this xda post)
5. ADB drivers (No need to worry about, unlockroot will automatically setup the adb driver while rooting)
Ok so let's move on to the steps:
1. This rar file contains my modified boot.img & the A45 scatter file (needed by SP Tools, tells the SP tools which rom addresses to flash).
2. Install the MTK drivers, just run the InstallDriver.exe program inside the MTK folder).
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
5. When the phone boots up go to Settings->Applications->Development and tick mark "Enable Debugging".
6. Now attach your phone using the data cable.
7. Open Unlockroot program through windows start menu.
8. Click the big green root button.
9. It will ask for installing drivers, click "yes"...it's now installing the ADB drivers.
10. Finally it will root your phone and will ask you for rebooting the phone, click yes.
11. Let your A45 reboot.
Finally after booting, check the app drawer for an application "Superuser"...Congratulations!! your A45 is successfully rooted!!!...:highfive:
Credits:
Me!
Sahil Deep, gave me a link to an original boot.img of A45
Caution: You can softbrick your device if you play around much on "GOD MODE" (Superuser mode), know what you are doing and accept the consequences if you make your device unusable (although highly rare)..
ANY QUESTIONS?? DONT HESITATE TO ASK ME!! POST IT TO THE FORUM, NO PM!
&..hey press the 'thanks' button if u think i deserve it..:angel:
EDIT: I HAVE ALSO ATTATCHED THE ORIGINAL BOOT.IMG OF THE A45 FOR PEOPLE WHO WANT TO USE THE STOCK BOOT.IMG!
vshlkmr said:
So, this is it! MICROMAX A45 has been rooted!! :laugh:
Things you would be needing:
1. SP flash tool -> ver 2.1 preffered (google it)
2. Download and extract my attatched .rar file.
3. Unlockroot (get it from www.unlockroot.com).
4. MTK drivers (download the attatchment from this xda post)
5. ADB drivers (No need to worry about, unlockroot will automatically setup the adb driver while rooting)
Ok so let's move on to the steps:
1. This rar file contains my modified boot.img & the A45 scatter file (needed by SP Tools, tells the SP tools which rom addresses to flash).
2. Install the MTK drivers, just run the InstallDriver.exe program inside the MTK folder).
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
5. When the phone boots up go to Settings->Applications->Development and tick mark "Enable Debugging".
6. Now attach your phone using the data cable.
7. Open Unlockroot program through windows start menu.
8. Click the big green root button.
9. It will ask for installing drivers, click "yes"...it's now installing the ADB drivers.
10. Finally it will root your phone and will ask you for rebooting the phone, click yes.
11. Let your A45 reboot.
Finally after booting, check the app drawer for an application "Superuser"...Congratulations!! your A45 is successfully rooted!!!...:highfive:
Credits:
Me!
Sahil Deep, Indiedevers member, gave me a link to an original boot.img of A45
Caution: You can softbrick your device if you play around much on "GOD MODE" (Superuser mode), know what you are doing and accept the consequences if you make your device unusable (although highly rare)..
ANY QUESTIONS?? DONT HESITATE TO ASK ME!! POST IT TO THE FORUM, NO PM!
&..hey press the 'thanks' button if u think i deserve it..:angel:
Click to expand...
Click to collapse
New around here (xda-dev and Android hacking), so please be gentle if I ask a stupid question. Have read may recommendations that before flashing a new ROM, one should backup their current ROM and user-data, so that one can recover one's phone if it were to be bricked for some reason. However, looks like to be able to do that, you need to Root the device first. And this seems to be a vicious circle.
Wondering if some way of backing up original ROM exists, without needing to Root, and how did Sahil Deep / Indidevers manage to get the original boot.img !!
BTW, I am probably too sleep-deprived, because I cannot seem to find the "Thank" button !! Will definitely click it once I've had a chance to try out your method and succeeded. Until then (and until I find the darn button), please accept my gratitude.
problem
i am having problems in using sp flash;
could you please detail that whole topic plz plz...
i too own micromaxx a45.
Worked!!!
It worked n rooted.. can you plz upload the original boot.img file of a45? and i also need a cwm custom recovery for a45....
plz make a rom
anyone make a rom for Micromax a45
---------- Post added at 12:16 PM ---------- Previous post was at 11:59 AM ----------
any tweak for a45..?
---------- Post added at 12:21 PM ---------- Previous post was at 12:16 PM ----------
how to add thanks button
---------- Post added at 12:44 PM ---------- Previous post was at 12:21 PM ----------
fast
Thanks for original boot.img..... and clicked thanks button too
Recovery console doesn't load
I followed the instructions you've given and have successfully rooted my Micromax A45! now the problem is, i manually flashed the clockworkmod recovery image onto RECOVERY using the SP Flash Tool v2.1 and when i try to boot into recovery mode, it gets stuck at the logo(Superfone PUNK logo) and doesnt go further. Pls suggest a solution. Many thanks!:cyclops:
i have
I have boot.img
---------- Post added at 11:15 AM ---------- Previous post was at 11:11 AM ----------
vshlkmr said:
So, this is it! MICROMAX A45 has been rooted!! :laugh:
Things you would be needing:
1. SP flash tool -> ver 2.1 preffered (google it)
2. Download and extract my attatched .rar file.
3. Unlockroot (get it from www.unlockroot.com).
4. MTK drivers (download the attatchment from this xda post)
5. ADB drivers (No need to worry about, unlockroot will automatically setup the adb driver while rooting)
Ok so let's move on to the steps:
1. This rar file contains my modified boot.img & the A45 scatter file (needed by SP Tools, tells the SP tools which rom addresses to flash).
2. Install the MTK drivers, just run the InstallDriver.exe program inside the MTK folder).
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
5. When the phone boots up go to Settings->Applications->Development and tick mark "Enable Debugging".
6. Now attach your phone using the data cable.
7. Open Unlockroot program through windows start menu.
8. Click the big green root button.
9. It will ask for installing drivers, click "yes"...it's now installing the ADB drivers.
10. Finally it will root your phone and will ask you for rebooting the phone, click yes.
11. Let your A45 reboot.
Finally after booting, check the app drawer for an application "Superuser"...Congratulations!! your A45 is successfully rooted!!!...:highfive:
Credits:
Me!
Sahil Deep, Indiedevers member, gave me a link to an original boot.img of A45
Caution: You can softbrick your device if you play around much on "GOD MODE" (Superuser mode), know what you are doing and accept the consequences if you make your device unusable (although highly rare)..
ANY QUESTIONS?? DONT HESITATE TO ASK ME!! POST IT TO THE FORUM, NO PM!
&..hey press the 'thanks' button if u think i deserve it..:angel:
EDIT: I HAVE ALSO ATTATCHED THE ORIGINAL BOOT.IMG OF THE A45 FOR PEOPLE WHO WANT TO USE THE STOCK BOOT.IMG!
Click to expand...
Click to collapse
vishal this my profile sahil deep
CWM recovery for Micromax a45
Hi,
I had earlier posted about a problem i had with clockworkmod on Micromax a45, and i'm really happy to say I have solved it! i edited the recovery.img file and replaced the cwm-kernel with the a45 stock recovery kernel and voila! it works perfectly! I have attached the custom recovery img which can be flashed using the SPF Tool. BTW, can anyone suggest any good custom ROMs for micromax a45? Thank you.:laugh:
How to add a kernal to recovery.img
prashanthca said:
Hi,
I had earlier posted about a problem i had with clockworkmod on Micromax a45, and i'm really happy to say I have solved it! i edited the recovery.img file and replaced the cwm-kernel with the a45 stock recovery kernel and voila! it works perfectly! I have attached the custom recovery img which can be flashed using the SPF Tool. BTW, can anyone suggest any good custom ROMs for micromax a45? Thank you.:laugh:
Click to expand...
Click to collapse
I am new to this thread but I just wanted to know how to edit recovery.img files I could not repack them using perl scripts please help.I have the whole romdump of A45
Repack img file
ayush.gaud said:
I am new to this thread but I just wanted to know how to edit recovery.img files I could not repack them using perl scripts please help.I have the whole romdump of A45
Click to expand...
Click to collapse
[THIS ONLY WORKS IN LINUX]
extract the zip file to the folder where you've unpacked the img file and modified it. open terminal, change the directory to that folder and type in
./mkbootimg --cmdline 'no_console_suspend=1 console=null' --kernel name-of-the-kernel --ramdisk name-of-the-ramdisk.gz -o recovery-new.img
how to install clockworkmod on micromax a45
Hi... Iam new to this forum and please tell me how to install clockworlmod recovery on my micromax a45 (rooted). Please Help me.
And thanx for the rooting information.
Custom Rom
prashanthca said:
[THIS ONLY WORKS IN LINUX]
extract the zip file to the folder where you've unpacked the img file and modified it. open terminal, change the directory to that folder and type in
./mkbootimg --cmdline 'no_console_suspend=1 console=null' --kernel name-of-the-kernel --ramdisk name-of-the-ramdisk.gz -o recovery-new.img
Click to expand...
Click to collapse
thanks for your reply. I would also like to know how we can port any other rom to our device or create update.zip I have tried on many roms but unsuccessful.
Porting
ayush.gaud said:
thanks for your reply. I would also like to know how we can port any other rom to our device or create update.zip I have tried on many roms but unsuccessful.
Click to expand...
Click to collapse
CHeck this out: [GUIDE] How to port Stock/GB/CM7/CM9/ICS/CM10/JB Based ROMs [Update: Sept.25.2012] - xda-developers
Also, can you upload the romdump and post the link?
unpack repack boot.img
prashanthca said:
[THIS ONLY WORKS IN LINUX]
extract the zip file to the folder where you've unpacked the img file and modified it. open terminal, change the directory to that folder and type in
./mkbootimg --cmdline 'no_console_suspend=1 console=null' --kernel name-of-the-kernel --ramdisk name-of-the-ramdisk.gz -o recovery-new.img
Click to expand...
Click to collapse
I have tried this command it says could not load boot.img-kernal I think I need another tool(or script) for unpacking and repacking can you please upload the tool you have used.
I will soon upload romdump link.
---------- Post added at 06:33 PM ---------- Previous post was at 06:27 PM ----------
I am new to this thread so can you please help me how to unpack repack boot.img I am getting error could not load kernel 'boot.img-kernal' I am trying to port custom roms so please help
---------- Post added at 06:41 PM ---------- Previous post was at 06:33 PM ----------
jayachar88 said:
New around here (xda-dev and Android hacking), so please be gentle if I ask a stupid question. Have read may recommendations that before flashing a new ROM, one should backup their current ROM and user-data, so that one can recover one's phone if it were to be bricked for some reason. However, looks like to be able to do that, you need to Root the device first. And this seems to be a vicious circle.
Wondering if some way of backing up original ROM exists, without needing to Root, and how did Sahil Deep / Indidevers manage to get the original boot.img !!
BTW, I am probably too sleep-deprived, because I cannot seem to find the "Thank" button !! Will definitely click it once I've had a chance to try out your method and succeeded. Until then (and until I find the darn button), please accept my gratitude.
Click to expand...
Click to collapse
I have romdump of A45 we can use psneuter and romdump to backup roms without root and same way we can root phone without any unsecure boot.img I did it the same way and succeeded.
prashanthca said:
Hi,
I had earlier posted about a problem i had with clockworkmod on Micromax a45, and i'm really happy to say I have solved it! i edited the recovery.img file and replaced the cwm-kernel with the a45 stock recovery kernel and voila! it works perfectly! I have attached the custom recovery img which can be flashed using the SPF Tool. BTW, can anyone suggest any good custom ROMs for micromax a45? Thank you.:laugh:
Click to expand...
Click to collapse
can u make a cwm recovery for a52 too???
hi i am using micromax a52 can u tell me...how to get clockwork recovery ...i tried to do it with builder colckworkmod.com...i got 4 file and.one named...recovery.img...what can i do now...i try to flash it with...uncle tool but...when i flash it it stuck on superfone aisha logo....plz help thnks in advance
Sent from my A52 using xda app-developers app
port cwm
psychopac said:
can u make a cwm recovery for a52 too???
Click to expand...
Click to collapse
Yes, if you can provide me the stock recovery.img of a52. But i'm not certain it'll work 100%, because a friend of mine tried the same method for micromax a56 and could not get it to work.
ttp://db.tt/s3a5l4dX. here is the drop box link of stock recovery.img
Sent from my A52 using xda app-developers app
prashanthca said:
Yes, if you can provide me the stock recovery.img of a52. But i'm not certain it'll work 100%, because a friend of mine tried the same method for micromax a56 and could not get it to work.
Click to expand...
Click to collapse
plz check thos..i upload it on dropbox...
send from mah rooted a52
Related
How to install clockworkmod recovery:
Edit: Fixed install zip from sdcard bug
Method 1: Needs root
The first method is preferable for those who have root access on their Micromax A90. Those who do not have a rooted device should follow Method 2 instead.
1. Download cwmr_v5.5.0.4 (fixed).zip and unzip/extract it. After extracting move both the files to the root directory of your SD card.
2. Install mu7577.apk and run it. After that give the program root permissions if asked and tap Recovery Update.
3. Select recovery.img from SD card then tap the ok button.
4. Now you can reboot to recovery.
Congrats!
Method 2: SP Flash Tool method, root not required
1. Download MTK6575 Drivers.zip and unzip/extract on your Windows PC, just run InstallDriver.exe to install drivers.
2. Download cwmr_v5.5.0.4 (fixed) + scatter.zip and SP_Flash_Tool_v3.1220.02_FOR_S101A.zip , unzip/extract them.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted cwmr_v5.5.0.4 (fixed) + scatter folder and select MT6575_Android_scatter_emmc.txt file.
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (without battery inserted) via the USB cable.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed CWMR!
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
Booting into CWM recovery is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into CWM!
I have also attached the the Stock Recovery.zip.
dear brother are you tested it ! please post some screenshot here with A90.
BHARDIK said:
dear brother are you tested it ! please post some screenshot here with A90.
Click to expand...
Click to collapse
Yes bro I have tested it!
I will post the screenshots soon
please also post here STOCK ROM full firmware , because if we failed then we need to restore i try custom recovery maybe 10 times always failed then need to go service center for restore. if you add stock firmware then we no need to worry about any experiment.
Presently I also don't have the stock rom or stock dump of micromax a90, I am currently running a self modded rom.
Follow this guide http://forum.xda-developers.com/showthread.php?t=1981107 to make a dump/backup of rom
Sent from my A90 using xda app-developers app
i have ROMDUMP back up , take backup using terminal emulator type onandroid and he done , but no boot and recovery image on this back up.
but i dont know how to restore it using sp flash tool ?
BHARDIK said:
i have ROMDUMP back up , take backup using terminal emulator type onandroid and he done , but no boot and recovery image on this back up.
but i dont know how to restore it using sp flash tool ?
Click to expand...
Click to collapse
bro follow my guide to dump the rom, by that guide you will get the complete dump i.e all flash files such as boot.img, recovery.img, system.img, mbr.img, logo.img, etc and there i have also written the complete procedure to restore the dump using sp flash tool
Sent from my A90 using xda app-developers app
THANX
The guide is great....CMW installed in minutes...thanx a lot...waiting for custom rom
airjordanthehacker said:
bro follow my guide to dump the rom, by that guide you will get the complete dump i.e all flash files such as boot.img, recovery.img, system.img, mbr.img, logo.img, etc and there i have also written the complete procedure to restore the dump using sp flash tool
Sent from my A90 using xda app-developers app
Click to expand...
Click to collapse
in your method when i try to add script in GS_Script.apk select file but no any file saw there
and second question is this method is working for Micromax A90s MTK6577 devices also ?
BHARDIK said:
in your method when i try to add script in GS_Script.apk select file but no any file saw there
and second question is this method is working for Micromax A90s MTK6577 devices also ?
Click to expand...
Click to collapse
extract BackupTool_*.zip to the root of your sd card after that only you will be able to see the script in load script option.
and i have not tested this script on mtk6577 but it should work for it.
Sent from my A90 using xda app-developers app
hey guys here is micromax FTP server site here u find all micromax android mobile stock ROM all the version of realesed + original flasher and imei writing tolls for MTK 65166 TO MTK6577 ! is it good for you guys ?
***
user id = mxlive [ in small latter ]
password = [email protected] [ M capital its not (O) its (0) zero ]
best way to use this !
you need Firefox browser for this, in Google chrome its not working !
just copy past this given id and password if you not understand !
and then use Internet Download Manager for downloading anything ! for better downloading speed !
Is there any Jellybean custom ROM for the A90?
No Abhi Still no sign of any ! Custom ROM ! for A90 and A90s both just have CWM !!!!
BHARDIK said:
hey guys here is micromax FTP server site here u find all micromax android mobile stock ROM all the version of realesed + original flasher and imei writing tolls for MTK 65166 TO MTK6577 ! is it good for you guys ?
***
user id = mxlive [ in small latter ]
password = [email protected] [ M capital its not (O) its (0) zero ]
best way to use this !
you need Firefox browser for this, in Google chrome its not working !
just copy past this given id and password if you not understand !
and then use Internet Download Manager for downloading anything ! for better downloading speed !
Click to expand...
Click to collapse
thanks!
BHARDIK said:
No Abhi Still no sign of any ! Custom ROM ! for A90 and A90s both just have CWM !!!!
Click to expand...
Click to collapse
Has anyone tried flashing ROMs of similar devices like Karbonn A18?
Sent from my Galaxy Nexus using Tapatalk 2
provide URL please
Please provide URL Please?
Micromax Stock Rom & Flasher site FTP or otherwise please!
Can anyone post or tell me where I can get Micromax Stock Rom & Flasher from their site or otherwise please? I'd like to reflash to stock state instead of just removing CWM.
airjordanthehacker said:
extract BackupTool_*.zip to the root of your sd card after that only you will be able to see the script in load script option.
and i have not tested this script on mtk6577 but it should work for it.
Sent from my A90 using xda app-developers app
Click to expand...
Click to collapse
Hi, it woks with NGM Legend ? (mtk 6575 phone)
Still no sign of any custom ROM?
Anyway, which device has a similar config as the A90. I'll try flashing it's custom ROM.
Custom Rom ICS 4.0.6
Dear All,
See my thread here for Custom Rom
My mobile is - NXG Phablet.
Its specifications match to A90.
Check - ics 4.0.6 custom rom in my thread and download.
but use your A90 ics 'boot.img'.. means, replace your 'boot.img' in the downloaded file and rezip and flash through CWM recovery.
after boot it will come in Russian language. (because it is for Star N8000 - russian forum). so change language to english in settings. also , default launcher is SPB shell - Russian version. so install another launcher and use.
Rom is very good.
check here in CUSTOM ICS area.
http://forum.xda-developers.com/showthread.php?p=32932373
Happy Testing.
MICROMAX A65 ROOTED!!
[Sorry Guys!!!!]
As my father always says creating something is much less difficult that maintaining it,well this happened once again for me!!!.
I found maintaining this thread difficult I am officially announcing that you may stop expecting updates on this thread.Hats off to sssomnath474 to giving a new life to it!!!And it looks more informative as well!!
To add salt to injury A65 which my wife was holding is having issues with front speaker.Even after its trip back from the service centre gurus,it again managed to holdon the issue.I have given up on the micromax guys as of now.
GUYS,PLEASE FOLLOW THE BELOW THREAD BY sssomnath474 HENCEFORTH
http://forum.xda-developers.com/showthread.php?t=2501464
Recent activities as on 07 Aug 2013
--------------------------------------------------------------------------------------
1.Unlocked boot image and rooted it.
2.Install CWM.
3.Flashed firmware
4.sssomnath474 installed xloud,beats,bravia and confirmed it is working.
5.sssomnath474 also made few modification with UOT and came up with update.zip.
6.Right now we have unlocked V4 boot img which according to sssomnath474 has battery life updation.
7.I am studing as much time i can extract for an OC kernel and sssomnath474 is working on a rom.
8.As update by sssomnath474 this boot.img can have a better battery backup
http://www.mediafire.com/download/opweg2nwd0hk5dw/new_boot.img
let me know if you guys have access issues with any of the links or any of the link appears to be dead
9.Added a user guide how to flash the firmware.Hope it helps
http://www.mediafire.com/download/h2q51j8ovn1m1pc/Flash_firmware_config.pptx
10.you can use windows 7(you have to boot it in test mode and run the research downloader in administrator)
Thanks to sssomnath474 for the info
11.you can use unlock root as confirmed by sssomnath474
Thanks to sssomnath474 for this info
12.LIST OF STOCK IMAGES/PAC FILES FOR ALL MICROMAX MODELS
http://www.moulnisky.com/index.php?dir=Micromax
Thanks to sssomnath474 for this info
13.Heard from sssomnath474 that somebody has bumped imei while flashing.If any of you is stuck with the same issue i would suggest a complete firware flash following this tutorial,ONLY difference in this case will be DONT use my modified boot.img just flash the pac file as it is.
14.WoW! guys never thought this thread will get mushroomed like this....thanks to sssomnath474 ,shubhamym21 ,J.E.abhishek kumar and others for keeping things rolling
15.Some of you are facing weird problems with sims as my quick scan through the posts suggested,any updates on this guys?
I made changes to OP what sssomnath474 suggested, i am saying again all you need to do in the research downloader is select the pac file,uncheck calibration.
16.pradipkunwar51 has reported issue with docomo sim after flashing,i believe shubhamym21 already found a solution to it.Will Update the OP as soon as he comes back with comments
17.Critical Update:Tutorial & Tool if you messed up your EMI
Tutorial can be found here : China spd adnroid phone imei change just one click
& here is the download link : Android SPD IMEI Writing Tool_R1.5.3001 - Download - 4shared - maroof azam
Thanks to shubhamym21 for sharing the link and tutorial
18.Moved all updates under this activity section for better clarity
19.Adding Bravia engine zip
http://forum.xda-developers.com/showpost.php?p=44487763&postcount=138
Thanks to sssomnath474 for the link
--------------------------------------------------------------------------------------
Finally rooted my Micromax A65.Follow the guide carefully to avoid mistakes.I am not responsible for any physical/logical damage to you and your device .
Thanks to authors and their posts
http://forum.xda-developers.com/showthread.php?t=2165554 ElectronikHeart(Guru of spreadtrum)
http://forum.xda-developers.com/showthread.php?p=42693514#post42693514 Yekdall (confirming me unlocking the boot.img is key)
http://forum.xda-developers.com/showthread.php?p=42776196#post42776196 Intex12345(calibartion tabs needs to be unckecked in RD)
http://whiteboard.ping.se/Android/Rooting (for unlocking the boot.img)
Foreground
A Chaina re-branned phone
A fastboot mode
A useless recovery mode
A locked boot.img (thats why even chmod or simply pushing a su will not root the phone)
A IMEI number(which if you mess up after flashing,you will not get any radio signals)
1)First Unlock the Boot IMG
Before you proceed I will strongly recommend to download the tutorial guide ppt that you will find in Recent Activity list at the top of this post
You need to tamper permission after extracting the boot.img for this.No worry guys i have already done that for you .Just download the below file
Unsecured Boot Image
Now a bit critical part,read carefully .This unlocked image needed to be flashed to your device.For that you need research download and firmware pac file.
Download this to files from the below links
PAC versions & Tools Download
(pac file,driver,research download all included)
Download this drivers and install,after successfull installtion you will have(under device manager)
1.ABD interface
2.two COM ports
3.two emulators
If any of this having yellow sign it will not work.
Open research download
click on first button and load pac file
click on second button change baudrate to 115200,in calibration tab uncheck all.
For BOOT_IMG option browse and select the unlockedboot.img that you downloaded now.
plugin the usb cable(DON'T plugin the phone now)
click on play button
PRESS & HOLD VOLUME UP KEY and insert the usb cable,don't release the key.
Download should starts within 3 secs.If it doesn't then check the drivers carefully or reply to this thread with failures.
Once done unplug your phone and remove battery for 3 second
Reinsert battery and restart your phone.
YES!! you have successfully unlocked the boot.img
2)WiseMen Backup!!
First thing you should do before any tweaking and twisting save your back!!.Install CMW using the below method straight away and save your back.
1.Download .andriod.zip,extract it and save it under C:\Users\<computer name>\<paste it here>
http://www.mediafire.com/download/ga5tk2h89m41ddk/.android.zip
2.From your phone got to application-->developer option-->enable usb debugging
3.Now plugin your phone through micro usb cable.
4.Download this zip ,extract and place in under c:/<paste it here>
http://www.mediafire.com/download/s2as5grqceqtqq3/Android_Multi_tool.zip
5.Open a command prompt type
Code:
cd C:\Android Multi tool
C:\Android Multi tool>fastboot devices
20080823 fastboot
Note:you will NOT be able to proceed further if this doesnt shows up.Double check the andriod.zip has adb_usb.ini file.
Now we will flash a custom recovery image in fastboot mode.
Code:
C:\Android Multi tool>fastboot flash recovery recovery.img
sending 'recovery' (10240 KB)...
OKAY [ 10.487s]
writing 'recovery'...
OKAY [ 3.425s]
finished. total time: 13.918s
7.Reboot your phone.
8.Now got to CMW using Volume up + power button and do a backup.
3)Push superuser zip & ROOT!!!
This the easiest step among all of them.Download the below file,put it under sdcard and flash it through CMW.
http://www.mediafire.com/download/t55b6ebzvx9yf1f/update.zip
THAT'S IT you are rooted!!!
REMEMBER,PROBABILITY OF BRICKING IS MINIMUM AS I HAVE ALREADY DONE ALL THE TEST FOR YOU GUYS !!!.STILL IF ANYTHING GOES WRONG DONT PANIC,JUST FLASH A FIRMWARE AS MENTIONED ABOVE(point 1) EVENIF YOUR PHONE IS
TOTALLY DEAD .
----------------------------------------------------------------------------------------------
Please hit thanks if i you find this useful
No body tested it yet ?
question
sayannayas said:
No body tested it yet ?
Click to expand...
Click to collapse
what if i flash it with fastboot
---------- Post added at 01:07 PM ---------- Previous post was at 12:48 PM ----------
beacuse i just flashed it with fastboot and its not booting
waiting for 10 mints
recovery.img error
sayannayas said:
MICROMAX A65 ROOTED!!
Finally rooted my Micromax A65.Follow the guide carefully to avoid mistakes.I am not responsible for any physcial/logical damage to you and your device .
Thanks to authors and their posts
http://forum.xda-developers.com/showthread.php?t=2165554 ElectronikHeart(Guru of spreadtrum)
http://forum.xda-developers.com/showthread.php?p=42693514#post42693514 Yekdall (confirming me unlocking the boot.img is key)
http://forum.xda-developers.com/showthread.php?p=42776196#post42776196 Intex12345(calibartion tabs needs to be unckecked in RD)
http://whiteboard.ping.se/Android/Rooting (for unlocking the boot.img)
Foreground
A Chaina rebranned phone
A fastboot mode
A useless recovery mode
A locked boot.img (thats why even chmod or simply pushing a su will not root the phone)
A IMEI number(which if you mess up after flashing,you will not get any radio signals)
1)))First Unlock the Boot IMG
You need to tamper permssion after extracting the boot.img for this.No worry guys i have already done that for you .Just download the below file
http://www.mediafire.com/download/1c6r9cu9iwc3769/boot.zip
Now a bit critical part,read carefully .This unlocked image needed to be NAND flashed to your device.For that you need research download and firmware pac file.
Download this to files from the below links
http://forum.gsmhosting.com/vbb/f811/guide-all-micromax-root-clockworkrecovery-1627895/
(pac file,driver,research download all included)
<IT WILL ONLY WORK IN 32 BIT WINDOWS XP,VM ALSO FINE>
Download this drivers and install,after successfull installtion you will have(under device manager)
1.ABD inteface
2.two COM ports
3.two emulators
If any of this having yellow sign it will not work.
Open research download
click on first button and load pac file
click on second button change baudrate to 115200,in calibaration tab uncheck all.
For BOOT_IMG option browse and select the unlockedboot.img that you downloaded now.
plugin the usb cable(DONT plugin the phone now)
click on play button
PRESS & HOLD VOLUME UP KEY and insert the usb cable,dont release the key.
Download should starts within 3 secs.If it doesnt then check the drivers carefully or reply to this thread with failuers.
Once done unplugg your phone and remove battery for 3 second
Reinsert battery and restart your phone.
YES!! you have sucessfully unlocked the boot.img
2)))WiseMen Backup!!
First thing you should do before any tweaking and twisting save your back!!.Install CMW using the below method straight away and save your back.
1.Download .andriod.zip,extract it and save it under C:\Users\<computer name>\<paste it here>
http://www.mediafire.com/download/ga5tk2h89m41ddk/.android.zip
2.From your phone got to application-->developer option-->enable usb debugging
3.Now plugin your phone through micro usb cable.
4.Download this zip ,extract and place in under c:/<paste it here>
http://www.mediafire.com/download/s2as5grqceqtqq3/Android_Multi_tool.zip
5.Open a command prompt type
Code:
cd C:\Android Multi tool
C:\Android Multi tool>fastboot devices
20080823 fastboot
Note:you will NOT be able to proceed further if this doesnt shows up.Double check the andriod.zip has adb_usb.ini file.
Now we will flash a custom recovery image in fastboot mode.REMEMBER,PROBABILITY OF BRICKING IS MINIMUM AS I HAVE ALREADY DONE ALL THE TEST FOR YOU GUYS !!!.STILL IF ANYTHING GOES WRONG DONT PANIC,JUST FLASH A FIRMWARE AS MENTIONED ABOVE(point 1) EVENIF YOUR PHONE IS TOTALLY DEAD .
Code:
C:\Android Multi tool>fastboot flash recovery recovery.img
sending 'recovery' (10240 KB)...
OKAY [ 10.487s]
writing 'recovery'...
OKAY [ 3.425s]
finished. total time: 13.918s
7.Reboot your phone.
8.Now got to CMW using Volume up + power button and do a backup.
3))Push superuser zip & ROOT!!!
This the easiest step among all of them.Download the below file,put it under sdcard and flash it through CMW.
http://www.mediafire.com/download/t55b6ebzvx9yf1f/update.zip
THATS IT you are rooted!!!
REMEMBER,PROBABILITY OF BRICKING IS MINIMUM AS I HAVE ALREADY DONE ALL THE TEST FOR YOU GUYS !!!.STILL IF ANYTHING GOES WRONG DONT PANIC,JUST FLASH A FIRMWARE AS MENTIONED ABOVE(point 1) EVENIF YOUR PHONE IS
TOTALLY DEAD .
Please hit thanks if i you find this useful.:good:
Click to expand...
Click to collapse
finally i rooted my cellphone thank u guys n thank u xda
sssomnath474 said:
what if i flash it with fastboot
---------- Post added at 01:07 PM ---------- Previous post was at 12:48 PM ----------
beacuse i just flashed it with fastboot and its not booting
waiting for 10 mints
Click to expand...
Click to collapse
You should not flash anything before you have unlocked the boot.img.It comes with a locked boot so flashing through fastboot may not work.
First thing that you should do now is stage up a windows xp with the drivers that i have linked here.connect your phone with research download and do a firmware flash.This will recovery your phone to its orginal state.Then follow my steps from the start(pls dont skip)
navi_5886 said:
i have done the same but when i go to recovery option it says cannot mount e:
Click to expand...
Click to collapse
you should have micro sd card,and it should be in fat32 formatted.Better if you backup your data in sdcard,format it with fat32 and then place only the update.zip
sayannayas said:
You should not flash anything before you have unlocked the boot.img.It comes with a locked boot so flashing through fastboot may not work.
First thing that you should do now is stage up a windows xp with the drivers that i have linked here.connect your phone with research download and do a firmware flash.This will recovery your phone to its orginal state.Then follow my steps from the start(pls dont skip)
Click to expand...
Click to collapse
ok downloading windows xp..good thing is i'm not scared
well do u have facebook id?
sssomnath474 said:
ok downloading windows xp..good thing is i'm not scared
well do u have facebook id?
Click to expand...
Click to collapse
Dont get me wrong but i think it is better to log your errors here as it might help others as well as me to correct the OP.
Once you have the setup use exact set of drivers and pac file that i linked in this thread.remember if you have a successful driver installation then you will have at least(under device manager)
2 new COM ports
2 emulators
I am working on capturing few snapshots or a demonstration guide,it will take time as i recently lost my bag-pack,will update with videos once i stage up.
sayannayas said:
Dont get me wrong but i think it is better to log your errors here as it might help others as well as me to correct the OP.
Once you have the setup use exact set of drivers and pac file that i linked in this thread.remember if you have a successful driver installation then you will have at least(under device manager)
2 new COM ports
2 emulators
I am working on capturing few snapshots or a demonstration guide,it will take time as i recently lost my bag-pack,will update with videos once i stage up.
Click to expand...
Click to collapse
thankx bro..it will help more if you give screenshots
sayannayas said:
Dont get me wrong but i think it is better to log your errors here as it might help others as well as me to correct the OP.
Once you have the setup use exact set of drivers and pac file that i linked in this thread.remember if you have a successful driver installation then you will have at least(under device manager)
2 new COM ports
2 emulators
I am working on capturing few snapshots or a demonstration guide,it will take time as i recently lost my bag-pack,will update with videos once i stage up.
Click to expand...
Click to collapse
need a help do i only check boot_img or i check all files?
sssomnath474 said:
need a help do i only check boot_img or i check all files?
Click to expand...
Click to collapse
check all files in main page,but for boot_img browse a select the unlocked boot.img that i have linked in this thread.The idea is to flash the unlocked boot.img instead of stock boot.img. Uncheck all in calibration page.Keep baudrate 115200
Also download the ppt that i just added.It may help you. Don't give up,setting the drivers will take trails & errors but i guarantee you the success
sssomnath474 said:
need a help do i only check boot_img or i check all files?
Click to expand...
Click to collapse
sucsessfully flashed with origianal system file..and one thing more it worked in windows 7 64 bit too
sssomnath474 said:
sucsessfully flashed with origianal system file..and one thing more it worked in windows 7 64 bit too
Click to expand...
Click to collapse
Great news buddy.If you have used my unlocked boot.img while flashing then rest of the steps will be a breeze to you.Install CWM and take a full back up.Then flash the update.zip,thats it.
sayannayas said:
Great news buddy.If you have used my unlocked boot.img while flashing then rest of the steps will be a breeze to you.Install CWM and take a full back up.Then flash the update.zip,thats it.
Click to expand...
Click to collapse
well thankx for boot image and help device is rooted
but this can be done in other way to
1.you can use windows 7(u have to boot it in testmood and run the research downloader in adminstor)
2.just use unlock root
thats it
thankx man.pls give ur facebook id
sssomnath474 said:
well thankx for boot image and help device is rooted
but this can be done in other way to
1.you can use windows 7(u have to boot it in testmood and run the research downloader in adminstor)
2.just use unlock root
thats it
thankx man.pls give ur facebook id
Click to expand...
Click to collapse
Mentioned your updates in OP.Hope you dont mind
sayannayas said:
Mentioned your updates in OP.Hope you dont mind
Click to expand...
Click to collapse
ok ok
well making some customizing themes in UOT cooked kitchen.hope it will work
sssomnath474 said:
ok ok
well making some customizing themes in UOT cooked kitchen.hope it will work
Click to expand...
Click to collapse
Wow! that will be really nice...hope you will share those with us
sayannayas said:
Wow! that will be really nice...hope you will share those with us
Click to expand...
Click to collapse
check it out
need pac file...!!!!
sssomnath474 said:
thankx bro..it will help more if you give screenshots
Click to expand...
Click to collapse
can anyone upload only pac file for mmx a65 !!!!! please......!!!!""
sssomnath474 said:
check it out
Click to expand...
Click to collapse
WOW looking nice...waiting for the release
Also if you are maintaining your own a65 thread for customs roms,suggest you to cross link with mine(vice versa) and keep track for both the threads
Install ClockworkMod Recovery 6.0.3.7 (CWM) or Team Win Recovery Project (TWRP) on Oppo Find 7a FHD (X900x) + Easy ROOT Method
Warning: Note: No one but yourself is responsible for what you do to your device.
X9007 = Chinese TD-LTE support // X9006 = EU FDD-LTE or US FDD-LTE support
Requirements:
Download / unzip the file --> AndroidSDKSlim.zip
Download one of the following two files --> X9007_CWM_recovery.im OR X9007_TWRP_recovery.img
Make sure you have a charged battery (50 % minimum)
How to install:
Connect your phone to your PC. You should see a window with the drivers in an application called 'setup.exe '.
Start the installation process and wait until it ends. then disconnect the phone from the PC.
Extract the contents of the file ' AndroidSDKSlim.zip ' on your desktop. You should have a folder named ' android-sdk-windows ' where there is another folder: 'platform-tools.'
In this folder, move the two .img files you downloaded ( X9007_TWRP_recovery.img X9007_CWM_recovery.img )
Turn off your mobile.
Restart your mobile in fastboot mode by pressing the High Volume + Power buttons until the appearance of the word ' Fastboot ' .
Connect your phone to your PC via the USB cable.
In platform-tools folder 'with your mouse, do' right click 'while holding down the 'Shift ' button, then select ' Open a command window here . '
In this window, type the following code to verify that your device is recognized.
Code:
fastboot devices
Then type the following command to install the TWRP or CWM :
For the TWRP
Code:
fastboot flash recovery X9007_TWRP_recovery.img
For the CWM
Code:
fastboot flash recovery X9007_CWM_recovery.img
Once the process is finished, disconnect your phone from your computer, then simultaneously press the buttons ' power ' and 'volume down ' until you feel a vibration.
Your phone will reboot into your new custom recovery.
Select ' reboot system now ' to reboot your phone !
How to root :
Just download the attached file --> UPDATE-SuperSU-v1.94.zip
Copy/paste it on your memory phone
Reboot into recovery mode
Flash the file & next reboot your phone
Enjoy ! You're root !
Video : Root method & Flashing Custom recovery by C4ETech
Note
If you don't want to root your phone by this way,(With CUSTOM Recovery) you can see this Thread -->> ROOT method with OPPO Recovery Stock
Credits & Thanks
Dees_Troy
jmz
mazwoz
sammycakes
Chainfire
C4ETech
TonyStark
Your feedback is welcome
Stock OPPO recovery
Flashable ZIP file --> oppo_recovery_v1.0.20140421-find7a.zip
Flash the ZIP file using TWRP or CWM recovery
Fastboot method IMG file --> oppo_recovery_v1.0.20140421-find7a.img
Flash the IMG file with this fastboot command :
Code:
fastboot flash recovery oppo_recovery_v1.0.20140421-find7a.img
Does this work for the X9006 international model?
Gesendet von meinem MI 2 mit Tapatalk
MrColdbird said:
Does this work for the X9006 international model?
Gesendet von meinem MI 2 mit Tapatalk
Click to expand...
Click to collapse
Hi,
Yes I think there is not difference betwen the X9007 & X9006. Need confirmation to be sure. Wait for first feedbacks. There is Only frequency bands difference I think...
X9007 = Chinese TD-LTE support
X9006 = EU FDD-LTE or US FDD-LTE support
should do a linux version. I rooted mine once i got it lol
Nice one! Now all I need is for the phone to arrive Was worried about whether there would be any development going on but it seems I was concerned about nothing.
Cheers.
Can anyone post a nandroid backup of the international model
i want to try it on my chineese model in order to get frznch language fully working
Actually i use morelocale 2 but some stuff are still in english
Thanks
Sent from my X9007 using xda app-developers app
houz said:
Can anyone post a nandroid backup of the international model
i want to try it on my chineese model in order to get frznch language fully working
Actually i use morelocale 2 but some stuff are still in english
Thanks
Sent from my X9007 using xda app-developers app
Click to expand...
Click to collapse
How about trying to install the ColorOS 2.0 International Beta? Includes French (as well as Google Play Services and is rooted)
Thank you!
im from Viet Nam.
Can i copy your post to devteam sir?
mrkimi84 said:
Thank you!
im from Viet Nam.
Can i copy your post to devteam sir?
Click to expand...
Click to collapse
Hello
If you give credits yes
Wipe
Is it Wipe ?
Are Oppo's update still available ?
Thanks
Any update on this being safe for the X9006 yet?
Got my phone today!!!
Just wanted to confirm the TRWP push worked great on my X9006 last night. Used included SuperSU to root and I'm all set! Well at least until the custom ROMs start flowing
No change in performance or anything?
Sent from my X9006 using XDA Free mobile app
jgunna405 said:
No change in performance or anything?
Click to expand...
Click to collapse
No change.
If anything a bit faster since I used TiBu to uninstall some stock system junk.
I will warn you though, with TWRP you can't run the stock OS updates (and one was released just this morning).
I'm hoping somebody will be able to find a way around that shortly with a custom zip for TWRP containing the updates though.
Dang, just opened up my phone, came to XDA to root so I can restore my saved apps and delete some system apps but now I can't get the OTA lol. Oh well, only a matter of time until the newest OTA is available via a flashable zip or at the least we can flash the stock recovery so we can OTA.
Yeah, no insult to this work which is great to have but for the moment I figured we were more likely to see a factory bug fix or two like the one that just got pushed before omni hits primetime so I decided to use the kedros method for now.
Hi eveybody
I Added the link towards second ROOT method on first post
Hope You'll like it
I believe with the OTA that went out since then, this custom recovery method may be invalid. I cannot flash CWM or TWRP using your method described above
(tried to share the image on dropbox, but not letting me for some reason. Here is a copy and paste of what I am getting) -
Directory of C:\TEMP\AndroidSDKSlim\android-sdk-windows\platform-tools
05/07/2014 10:07 AM <DIR> .
05/07/2014 10:07 AM <DIR> ..
05/07/2014 10:03 AM 819,200 adb.exe
05/07/2014 10:03 AM 96,256 AdbWinApi.dll
05/07/2014 10:03 AM 60,928 AdbWinUsbApi.dll
05/07/2014 10:03 AM <DIR> api
05/07/2014 10:03 AM 160,256 fastboot.exe
05/07/2014 10:03 AM 727,881 NOTICE.txt
05/07/2014 10:03 AM 16,654 source.properties
05/07/2014 10:03 AM <DIR> systrace
05/07/2014 10:05 AM 13,877,248 X9007_CWM_recovery.img
05/07/2014 10:07 AM 15,233,024 X9007_TWRP_recovery.img
8 File(s) 30,991,447 bytes
4 Dir(s) 181,535,727,616 bytes free
C:\TEMP\AndroidSDKSlim\android-sdk-windows\platform-tools>fastboot devices
8e72e3fc fastboot
C:\TEMP\AndroidSDKSlim\android-sdk-windows\platform-tools>fastboot flash recover
y x9007_CWM_recovery
error: cannot open 'x9007_CWM_recovery'
C:\TEMP\AndroidSDKSlim\android-sdk-windows\platform-tools>fastboot flash recover
y X9007_CWM_recovery
error: cannot open 'X9007_CWM_recovery'
C:\TEMP\AndroidSDKSlim\android-sdk-windows\platform-tools>fastboot flash recover
y X9007_TWRP_recovery
error: cannot open 'X9007_TWRP_recovery'
Hi
I dont know try with another computer. @seanpr123 has confirmed that the TWRP works
Envoyé de mon GT-I9305 en utilisant Tapatalk
Hello guys...
We all know that a custom recovery is far more important thing i rooted phone. But since we're talking about mediatek,its hard to find a suitable recovery.
Now these days,its very easy to create CWM based recovery through Mtkdroidtools. But,CWM is quite a oldschool yo!!
But TWRP is awesome!! Cuz its touch based and far more easy to use...but its so hard to find mediatek TWRP,so this guide will be helpfull i guess!!
~~Requirements~~
1.A computer with Windows 7 32 bit
2.The stock recovery.img[it can be found in your phone's stock rom]
3.TWRP script>>
Download link>> htt p://www .me diafire.com/folder/ca6 n5bb8 ocu87/TWRP_an d_CWMR
Download "Port-TWRP-V2.4.4.0-MT6589.7z" file from that link!!!
Now extract that 7z file and put the folder in your computer's C:// drive.....and put your stock recovery.img in C:// too.
Now open That extracted folder and you'll see a .exe file. Run that file as administration and a command window will appear.
Now it'll ask you to put your recovery.img in C:// and that is already done. So press Enter and follow the next steps. It'll ask you too put your device's chipset,resolution....so enter correctly.
When it is all done, close that Window and you'll see a folder is created called "Ported TWRP" open it and you'll get your newly created TWRP recovery.img. Copy that in your sdcard and flash it via latest Mobile Uncle Tools and voila!! You'll be rebooted to your TWRP custom recovery!!!!!
N.B>> this process is only for mt6577,mt6589 and mt6575.
Hit thanks if you like it.
Android Devilzz[root n stuffs]
Click to expand...
Click to collapse
This seems so easy I will try it
bro it shows error found please help me
Hello guys,
Today I am presenting stable rooting method for D5322_19.3.A.0.470_Lollipop 5.0 without any old FTF requirement or fear of data loss etc.
Requirements
D5322 with Unlocked bootloader
Current firmware version should be 19.3.A.0.470
Flashtool with updated fastboot and flashmode drivers
50% Battery and a Safe backup (In case of error)
Happy mind
Downloads
1. Recovery kernel (Please download DUAL_RECOVERY_D5322-LP.img for best result) ====>> Here (16 MB)
(Recovery kernel credits goes to our respectable XDA Recognized Contributor @abcdjdj)
2. SuperSU.zip ===> Here (Tested)
3. Download BusyBox ===> Here Tested v1.23.1-Stericson.zip
Rooting procedure
Move SuperSu.zip, BusyBox.zip to your devices and turn off it.
Put downloaded D5322_19.3.A.0.470_Lollipop 5.0.ftf in flashtools firmware folder
Open Flashtool and connect your device in FASTBOOT mode by holding volume UP key.(Blue LED)
Flash recovery kernel in fastboot mode and disconnect the device.
Turn on device,press volume down button continusly when you see pink LED.
Flash SuperSU and BusyBox
Wipe cache and delvik
Turn on device -- Rooted + No read write issue + No SD card problem
Rare issue
=> Some users may face system app removal problem ==> Fix Here
=> Flashtool Cannot unbundle files (Very rare) ==> Fix Here
Feel free to ask questions ......
Not able to perform step 10.
error as :
Click to enlarge image
10/010/2015 18:10:29 - INFO - Selected Bundle for Sony Xperia T2 Ultra (D5322). FW release : 19.3.A.0.470. Customization : Lollipop 5.0
10/010/2015 18:10:29 - INFO - Preparing files for flashing
10/010/2015 18:10:29 - ERROR - Cannot delete C:\Users\'@#&\.flashTool\firmwares\prepared\boot
10/010/2015 18:10:29 - INFO - Cannot open bundle. Flash operation canceled
---------- Post added at 06:45 PM ---------- Previous post was at 06:12 PM ----------
any help?
---------- Post added at 07:18 PM ---------- Previous post was at 06:45 PM ----------
stuck at step 10, help me buddy.. I am waiting
Buddy, It seems your end problem == user account permission // corrupt download // file is using by another process
what to do?
no process is running or using any file..
---------- Post added at 07:30 PM ---------- Previous post was at 07:28 PM ----------
all I think is problem is with this file only
4. D5322_19.3.A.0.470_Lollipop 5.0 kernel (9MB)
can you reupload or send me this file? 5.0 or 5.0.2 kernel so I can start my device
---------- Post added at 07:58 PM ---------- Previous post was at 07:30 PM ----------
step 10 problem SOLVED
Figured it out! thnx to @ kentexcitebot
I went through C:\Users\name\.flashTool\firmwares and deleted the "prepared" folder under the folder "firmwares".
That fixed the problem, apparently.
Now device is about to boot.. waiting for boot complete
I went through C:\Users\name\.flashTool\firmwares and deleted the "prepared" folder under the folder "firmwares".
That fixed the problem, apparently.
Now device is about to boot.. waiting for boot complete
Click to expand...
Click to collapse
Similar to "FILE IS USING BY ANOTHER PROCESS" Delete means you forced to terminate the process..
rrajesh said:
Similar to "FILE IS USING BY ANOTHER PROCESS" Delete means you forced to terminate the process..
Click to expand...
Click to collapse
yes... my bad.. you need to update steps.. as someone else might get same problem.
root access worked properly. :good:
now my problem is xposed installer.. how to install?
tried flashing zip, but device won't boot.
Xposed is not not available for our device yet...Wait until it fixed for our device. .. You can delete all xposed files to get rid on bootloop.
Solution
1. Flash recovery kernel from #1 post
2. Get rid on Xposed bootloop HERE manually : no flash required
I am not being harsh
I am just letting know what is happening, sorry if I sound harsh
already uninstalled xposed.
ok, so finally I manage to get it working,
1st performed clean installation of 5.0.2 ftf
then followed steps 1 to 9
then deleted the "prepared" folder under the folder "firmwares", (If existed).
then followed step 10 & 11.
started device & updated everything.
I got proper root access & everything is working fine :good:
Thank you :good:
Only problem is, cant boot in Recovery now, after everything is done successfully.
Hw u managed to work xposed on our phne its nt possible as it is not working anymore @rrd84
Thanks bro, root successful but cannot remove/uninstall system apps please help
Check Dis thread @joseph LR http://forum.xda-developers.com/showthread.php?t=3096863
pvnsai73 said:
Hw u managed to work xposed on our phne its nt possible as it is not working anymore @rrd84
Click to expand...
Click to collapse
NO, xposed is not working, bootloops, I said I managed to fix my problem of step 10.
you misunderstood me
---------- Post added at 08:03 PM ---------- Previous post was at 07:56 PM ----------
joseph LR said:
Thanks bro, root successful but cannot remove/uninstall system apps please help
Click to expand...
Click to collapse
yes.. preinstalled apps are not uninstalling by this root method, everything else is good.
but kingo root method can uninstall them, kingo root is chinese root tool,
but I am not able to replace kingo root SuperUser with supersu,
thats y I am sticking with this thread root method.
---------- Post added at 08:11 PM ---------- Previous post was at 08:03 PM ----------
pvnsai73 said:
Check Dis thread @joseph LR http://forum.xda-developers.com/showthread.php?t=3096863
Click to expand...
Click to collapse
I am having this problem, any help?
whichever option I select, mobile either reboot or poweroff
click image to enlarge
joseph LR said:
Thanks bro, root successful but cannot remove/uninstall system apps please help
Click to expand...
Click to collapse
Dear joseph LR,
You can download following apps from PlayStore
Download R/W Checker from HERE
[Open and tap to R/W, if successful your root is with r/w is ok]
System App remover (Using since 2012) Download
Enjoy!!
Dear @rrd84,
I worked on recovery and Xposed with different methods whole Sunday,,,but not working.. RC LED blinks but phone boot normally always
I think we should wait until @Nut (XZ Developer) fix it..
.
@ rrajesh
Thanks for R/W Checker
working perfectly now
yes.. we should wait until @Nut (XZ Developer) fix it..
No Recovery Mode D5322 since rooted Kitkat 4.4.3
I am not able to do Step 6 as my device doesn't boot into recovery mode. Is there any other way of flashing SuperSU and BusyBox? Please help me. Can I flash them using flashtool?
Thank you
badboy_0077 said:
I am not able to do Step 6 as my device doesn't boot into recovery mode. Is there any other way of flashing SuperSU and BusyBox? Please help me. Can I flash them using flashtool?
Thank you
Click to expand...
Click to collapse
No, you can't flash them using Flashtool
Read 1st post carefully for recovery mode...
????
about step no. 4 Flash recovery kernel in fastboot mode and disconnect the device can any one tell me what to do exactly in pic if possible
rustynail1985 said:
about step no. 4 Flash recovery kernel in fastboot mode and disconnect the device can any one tell me what to do exactly in pic if possible
Click to expand...
Click to collapse
#Download recovery kernel an put it on C:\Users\[ UR NAME] \.flashTool [latest flashtool]
#Connect your device in fastboot mode ( Hold volume up and now inset usb...Wait 15Sec)
#Open flash tool ,, click on Flash Device (First icon)
#Select fastboot
#Select flash kernel (Browse downloaded file. change file type sin to img in explorer)
#OK
rrajesh said:
No, you can't flash them using Flashtool
Read 1st post carefully for recovery mode...
Click to expand...
Click to collapse
I did all the steps successfully . But im not able to use flodermount. It gives error unable to write to sd. Root explorer also not mounting to r/w. NextappSd also showing error. Phone is successfully rooted. Please help