my first topic here i hope you reply soon - HTC Cavalier

i don't own that device but i just installed the arabiezer for my friend's HTC S630 Cavalier and it worked but then the mobile restarted and i can't switch it on
i found that i installed the vox version which is not for this device :'(
so what to do how to install a stock rom or any rom to fix this hope you reply

samo_gf said:
i don't own that device but i just installed the arabiezer for my friend's HTC S630 Cavalier and it worked but then the mobile restarted and i can't switch it on
i found that i installed the vox version which is not for this device :'(
so what to do how to install a stock rom or any rom to fix this hope you reply
Click to expand...
Click to collapse
take the device to bootloader mode by the way while holding the camera button on the right side, press the power button. The phone will go into a mode "bootloader" and you'll see tricolor bootscreen. then connect usb to pc and reflash with stock rom ftp://ftp.xda-developers.com/Uploads/Smartphone/Cavalier/Shipped_Complete_Updates/Dopod/

Before re-flashing, a hard-reset will have the same effect. It removes any installed SW (but also all your personal data).
- Press left+right softkey and keep holding them
- switch on and keep above keys pressed
- wait until query appears (a few seconds)
- confirm (usually the green key)
Then you get a clean device as out of the box, however all contacts and data are lost.
Before doing such drastic thing, could you describe what happens exactly if you say "can't switch on"?!

Related

Please help - My Excalibur won't boot up.

Dash Bricked Need Help!!!
I tried using a the google mail java app on my tmobile dash. It froze up on me, and when i turned it back on it just stays at the "tmobile" splash screen. I have tried using the soft key and power button reset but it doesnt work. What's weird is that it wont power down unless I take the battery out. It powers on, shows the tmobile splash screen, then freezes. Is there any other way to reset it or is it totally bricked? I bought it new off craiglslist so tmobile wont replace it for me cause I'm using it unlocked on cingular.
The power key reset should work. Could you be doing it wrong?
I was facing the same problem but after doing hard reset (Power Off, Press 2 soft key, Press Power On Key for 2 seconds then release soft key) worked fine. Seems timing is very important, try and try.
Help, i think i bricked my phone!
I was installing the WM6 Update released on this website, everything was going fine when i saw that my lil' cousin' disconnected my phone while i moved away from the PC (he pulled the phone altogether).
Now my phone is stuck in the bootloader mode screen (tricolor, blue green/red i think). It detects USB (it says USB on the bottom of the screen whenever i connect it). Is there a fix for it for the DASH? I read the wiki about a fix for a similar problem for the Hermes, but that didnt work for mine.
Can anybody help me please?!
Mine's a T-Mobile Dash with the stock rom from T-Mobile.
remove and reinsert the battery
if that does not work paperweight thats how i ruined my cingular 2125
Oh god, all this brickage makes me too scared to update. Can anyone direct me to where I can find how to backup my current setup so that I could reload it if something went wrong or I didnt like the Beta WM6?
MrLuna said:
I was installing the WM6 Update released on this website, everything was going fine when i saw that my lil' cousin' disconnected my phone while i moved away from the PC (he pulled the phone altogether).
Now my phone is stuck in the bootloader mode screen (tricolor, blue green/red i think). It detects USB (it says USB on the bottom of the screen whenever i connect it). Is there a fix for it for the DASH? I read the wiki about a fix for a similar problem for the Hermes, but that didnt work for mine.
Can anybody help me please?!
Mine's a T-Mobile Dash with the stock rom from T-Mobile.
Click to expand...
Click to collapse
Just try the flash again and it should start working. I had my computer bluescreen while I was flashing an SDA and got to the tricolor screen. It flashed fine after trying again. If its not detecting right. Pop out the battery on the phone and restart your computer and attempt the flash again. Shouldn't be a problem. Definitely scary though. I don't think you can brick these unless you mess up the bootloader perhaps...
ANyone know How do I manually put my Dash in Bootloader mode?
deemota said:
ANyone know How do I manually put my Dash in Bootloader mode?
Click to expand...
Click to collapse
power off, hold the camera key beside Space Tab for about 3 sec, and then press power key while still pressing the cam key.
You are a GOD. Thanks.
you have no idea why it gives you warnings not to run any programs or disconnect while the ruu is updating you think they just give you warning messages because the htc techs have nothing better to do????????
Blackforge said:
Just try the flash again and it should start working. I had my computer bluescreen while I was flashing an SDA and got to the tricolor screen. It flashed fine after trying again. If its not detecting right. Pop out the battery on the phone and restart your computer and attempt the flash again. Shouldn't be a problem. Definitely scary though. I don't think you can brick these unless you mess up the bootloader perhaps...
Click to expand...
Click to collapse
Well, tried that, but the computer doesnt detect the phone, meaning it wont connect to ActiveSync. Since it won't connect to activesync the program wont install it on the phone since it can't find it.
Good thing i have insurance. Bad thing i'm trying again as soon as i get the replacement
Are there any alternatives though? Maybe i can fix it before i send this one back.
restart your computer again..
This is from HTC Q&A
Q: I use RUU to update and failed, and my device always boots in three-color mode and cannot enter CE OS anymore, what should I do now?
A: If the update process has failed, you will see that your device will always boot in three-color mode. It's normal and can be recovered. Please follow the instructions below to reset your device and to establish a connection with the computer.
1. Disconnect your Mobile Device from the USB cradle/cable.
2. Reset your Mobile Device.
3. Reconnect your Mobile Device to the USB cradle/cable.
4. Check that the communication cradle/cable is connected properly.
5. Return to the ROM Update Utility.
Note: You should ignore the ActiveSync connection.
WM6: Endless Bootup Loop
A few days before the official TMobile WM6 update came out I download the widely posted leaked version. The Dash started acting up during bootup one day, so I reflashed with the TMobile WM6. Now the same thing just started, and the device can't be used.
When powered on it does the quick vibrate, TMobile screen, Windows Mobile Screen, TMobile screen again, with power up 'jingle', then it just shuts off and starts the bootup sequence again. Endlessly.
Have tried removing the battery, etc. Has anyone else run into this? Any ideas of a keypress combo or something I can press during bootup that might jump-start it??? Thanks!
Take out the microSD card and the unit should boot properly. Mine was fixed with a new SIM card, but a new device may also be needed.
Wound up doing a hard reset. I had tried taking out the microSD card, then it would just hang on the TMobile screen. I also tried rebooting without the SIM card in, then it would do the loop thing. I'm thinking it must be related to software loading during the boot, and the only program I have on the microSD card that loads during bootup is FizzWeather.
rabilancia said:
Take out the microSD card and the unit should boot properly. Mine was fixed with a new SIM card, but a new device may also be needed.
Click to expand...
Click to collapse
I think this may at times be related to an auto-install file being present.
If you hold down the "end" key during boot-up it seems to prevent the cycling.
Thanks, will keep that in mind if it happens again. By 'end' key, do you mean the red phone icon key that you hang up on a call with?
robertgbl said:
I think this may at times be related to an auto-install file being present.
If you hold down the "end" key during boot-up it seems to prevent the cycling.
Click to expand...
Click to collapse

connection lost during flashing :(

EDIT: I fixed it!!
I ran into a very old thread here....
I entered the bootloader and I flashed an official rom, after I downloaded it
I will keep this rom as a security from now on!
----------------------------------------------------------------------------------------------------------------------------------------------------
Hi everyone,
I have been enjoying all the roms you all gave to use many many years now.
Also I have been able to flash them without any problems....However this morning.... I was flasing a new version and during the flashing I knocked my phone of my usb-cable..... OUCH....
I am now trying to find a way to rectify this again, because now it will not boot, not recover, no nothing.
When I am in bootloader I cannot flash any roms (I have tried 7 different roms)
My Artemis P3300 is fully unlocked, but I cannot connect to active sync, nothing.
Will someone please guide me in how I can recover my phone and flash a rom again?
Can't do anything anymore, other then enter the bootloader, but flashing any rom will abort after 3%
Please be so kind as to help me out.
Thank you very much
Gianna xxx
--------------------------------------------------------------------------------------------------------------------------------------------------
repair frozen wm/ppc & flash rom again
just press the voice command & power button together[/B] and keeping the two button pressed together press the reset button together and then leave the reset button but continue keep pressing the voice dial & power button until the 4 band / 3 band colour mode appears.
( the reset button is found in a very small hole / but be careful , donot get confused with the microphone hole ).
when this 4 band / 3 band colour appears connect the active sync wire an connect to the computer.
you can find that in the mobile screen it will appear as usb.
i have really recovered my frozen htc p3300/ dopod p800 w
really thanks to xda developers... they are really genious/marvellous..
they can really do any thing ... three cheers to them.
hats off to them.

Help with HTC Touch Diamond, won't boot

Hello, this is my first post here. I tried to install Windows Mobile 6.5 as indicated in Gizmodo http://gizmodo.com/5281397/how-to-install-windows-mobile-65-right-now but it didn't work and now my phone won't boot.
The phone is an HTC Touch Diamond from Sprint. I followed all the steps indicated and everything look fine, but after installing the OS the phone displays the screen TOUCH DIAMOND, and then restarts and displays the same thing. I'm able to get into the boot loader (Tri color screen) and says:
DIAM500
SPL-0.57.CMONEX
MicroP-Diam (LED) vB
PSOC-Diam STAGE_EVT v20.
I don't know what to do now
Thanks
try to load back to default setting by pressing the power on button at the top of the phone, before the "Touch Diamond" logo come up, press and hold volume down button and the center button until the three color screen come out, then release the two button you are pressing..
if the problem still happen, that mean the rom you are using should have risk on it..
give it up and try other rom or flash it again..
hope my suggestion can help you solve the problem..
dont worry.
if bootloader is possible as you write
than you can flash all time orig. rom back.
Flash from Olinex 1.40 screen?
okokur said:
dont worry.
if bootloader is possible as you write
than you can flash all time orig. rom back.
Click to expand...
Click to collapse
Hi I have the same issue on my HTC Diamond. I flashed wm 6.5 and it was working fine, then it hanged on titanum weather. I reset and it stayed on the HTC Diamond page, I did hard reset and got the Olinex 1.40 3 color page. It does respond from serial to usb when I plug/unplug. Can I reflash without active sync?
Turns out I was able to flash, but both roms I tried work well on 1st install, but stay stuck on the Touch Diamond screen everytime I restart de device. Is it a problem with the radio not compatible , or is there a specific Hspl for each ROM???
I found solution for this problem. If your diamond won't boot go to bootloader mode and upgrade your radio http://modmydiamond.info/index.php?option=com_content&task=view&id=15&Itemid=26 and after that your dimond worked fine without loosing data.
try to hard reset the phone by pressing vol down key + the center button + reset button.
if the problem is still like dat..
try to install another rom..
davidwong007 said:
try to load back to default setting by pressing the power on button at the top of the phone, before the "Touch Diamond" logo come up, press and hold volume down button and the center button until the three color screen come out, then release the two button you are pressing..
if the problem still happen, that mean the rom you are using should have risk on it..
give it up and try other rom or flash it again..
hope my suggestion can help you solve the problem..
Click to expand...
Click to collapse
Thanks davidwong007 for your help, I was experiencing the same issue as op and your method did the trick. For a minute there I thought I had bricked my HTC Touch. I did step by step what you suggested and ended up in the rainbox screen, once I was able to do that, I knew there was a hope. i did a full factory reset of the phone and voila the phone fully booted, the pain in the butt touchflow loaded. Very important thing I forgot to do in the past is to back up my phone, after the restore you will lose everything on phone, except what is in the internal storage. Thanks again.

HELP....cannot turn on my mobile after flashed a new rom (Energy Rom) into my Diamond

I flashed a new rom (Energy Rom) into my Diamond before.
After power on.......
just "TOUCH DIAMOND" on the screen
and after few seconds....
"R 1.08.25.20
G 52.44.25.24U
D 2nergy ROM" (in red colour)
appear on the right bottom screen
then stop...
It cannot run window mobile6.5 now.........how can I do???
I cannot connect to PC .......
Have you tried to manually open the bootloader, connect it to PC and than flash another rom ? (maybe the original one will help)
i had the same problem with my pro. but my pro somehow fixed itself, i just kept pulling the battery out and wait a minute then put the battery back in and turn it on then like the 12th time it loaded up very slowly so i ran to my computer and loaded another rom. but i'm sure you tried that.
have you tried a hard reset, it's differnt from each carrier i think but it's something like hold the phone upside down and press the volume down button and then put your stylus in the reset button, idk if it will work but what can it hurt. but just rememebr there is a couple differnt ways of doing it and i think it's by the carrier.
Sorry to hear that..
I would recommend a hard reset first. Do that by reseting your phone using your stylus then immediately hold the volume down button and the enter button (the round center button on your dpad).
Keep holding them until you are prompted to hard reset. Follow the instructions. After the hard reset, if your phone still doesn't boot enter bootloader manually by reseting uing the stylus and hold down the volume down and the button with the backward arrow on your dpad. Keep holding until the phone enters bootloader. Connect your phone using USB to your computer and flash a new ROM. If no ROM works, the original should work.
Hope this helps. Good Luck.
I have same problem and hard reset helps to fix that...I recomend after that to change energy rom because it can happens again...

Htc desire 526g stuck in boot loop

Hi guys, months ago i rooted my HTC 526G with Kingoroot. I later tried to update the software over wifi. It updated but in restarting its now stuck in boot screen and sometimes goes into recovery by itself. Is there a way I can revive the firmware? Any help appreciated
HTC Desire 526G
I have problem like this ....cant fix it
Warning/Disclaimer: This will erase everything you have on the phones internal memory. (if you have play store set up right, you can just log back in afterwards and it will pull all your data/apps back, however if you don't, make sure to backup any contacts, data, ect that may be on the phones storage before attempting this) (then again, if you were already trying to root, you should have had everything backed up already anyway )
Charge the device to at least 50% (or an hour or two at least if the battery was completely dead)
Hold the Volume Down Button, Press power button, keep holding the volume down button
Phone should boot into HBOOT or Download mode,
use the volume up and down buttons to highlight Recovery Mode
press power button to select Recovery Mode
Phone will reboot with a red triangle icon, press all three buttons at the SAME time (vol up, vol down, power)
use the volume up and down buttons to highlight Clear Data (Factory Reset) press power button to select, let it finish clearing /data/ and /cache/
Once this has completed, Pull the battery out, let it sit for like 30 seconds without the battery
Put battery back in
hold power button for a while until it vibrates, release power button
let it sit at the htc boot screen for 10 minutes phone should eventually move to the verizon boot screen (if it goes over 10 minutes on the htc screen, try procedure again)
Post here if you have any trouble.
Still have problems
wassti said:
Warning/Disclaimer: This will erase everything you have on the phones internal memory. (if you have play store set up right, you can just log back in afterwards and it will pull all your data/apps back, however if you don't, make sure to backup any contacts, data, ect that may be on the phones storage before attempting this) (then again, if you were already trying to root, you should have had everything backed up already anyway )
Charge the device to at least 50% (or an hour or two at least if the battery was completely dead)
Hold the Volume Down Button, Press power button, keep holding the volume down button
Phone should boot into HBOOT or Download mode,
use the volume up and down buttons to highlight Recovery Mode
press power button to select Recovery Mode
Phone will reboot with a red triangle icon, press all three buttons at the SAME time (vol up, vol down, power)
use the volume up and down buttons to highlight Clear Data (Factory Reset)
Once this has completed, Pull the battery out, let it sit for like 30 seconds without the battery
Put battery back in
hold power button for a while until it vibrates, release power button
let it sit at the htc boot screen for 10 minutes phone should eventually move to the verizon boot screen (if it goes over 10 minutes on the htc screen, try procedure again)
Post here if you have any trouble.
Click to expand...
Click to collapse
i've done the procedure but unluckly i'm still having this problem, did someone fix the loop with this method? should i just wait for custom roms? :crying:
I had it happen to me after trying to root with just about every tool out there, mine would boot up but wouldn't go past the htc boot screen white background green htc. After I cleared the data a few times (at least 3) it came back up, try the procedure more than once. Also be patient and wait the full 10 minutes for it to come back up, sometimes it can be slow to load for the first time after this kind of wipe.
wassti said:
I had it happen to me after trying to root with just about every tool out there, mine would boot up but wouldn't go past the htc boot screen white background green htc. After I cleared the data a few times (at least 3) it came back up, try the procedure more than once. Also be patient and wait the full 10 minutes for it to come back up, sometimes it can be slow to load for the first time after this kind of wipe.
Click to expand...
Click to collapse
Try to root with "PhilZ Recovery by Ajit", search on google, i don't remember where i have download it, but it is an .exe file.
After you install it on your computer, you select USB debugging, and connect your phone to the computer, the rest of the process is auto.
After the installation process, the phone will autoreboot in recovery, here you will select ---> Advanced Function---> RE-root System (SuperSU).
After that, reboot, and install SuperSU from GooglePlay.
Success.
Root without boot loop (you may want to wipe Dalvid Cache before reboot after selecting root).
I hope this works for you ( it worked for me HTC desire 526g ).
Have a nice day.
IF you dont find the Philz, contact me, i wil send it to you.
Philz Recovery by ajit is designed for devices using the Mediatek processor; Sadly our 526 (no g, no +) uses a qualcomm processor. I do not recommend anyone to attempt to use "Philz recovery by Ajit" to attempt to root their HTC 526 as at best it will fail and at worse it will flash a non-compatible recovery and turn your device into a hard-brick.
wassti said:
Philz Recovery by ajit is designed for devices using the Mediatek processor; Sadly our 526 (no g, no +) uses a qualcomm processor. I do not recommend anyone to attempt to use "Philz recovery by Ajit" to attempt to root their HTC 526 as at best it will fail and at worse it will flash a non-compatible recovery and turn your device into a hard-brick.
Click to expand...
Click to collapse
I know...i said it is for HTC 526G.
Yep, I know you said it; just needed to clarify for other members so there is no confusion if someone comes here from a google search or what not
This forum is for 526 only, not the g or +
Bricked
I tried to wipe, but it still staing on htc screen...can someone do a backup or something and send me a link and reply me. i need it
sorry for bad english
I have the same problem please help us
emwakishi said:
Hi guys, months ago i rooted my HTC 526G with Kingoroot. I later tried to update the software over wifi. It updated but in restarting its now stuck in boot screen and sometimes goes into recovery by itself. Is there a way I can revive the firmware? Any help appreciated
Click to expand...
Click to collapse
I've exactly the same problem... does anybody have a rom for this model?
emwakishi said:
Hi guys, months ago i rooted my HTC 526G with Kingoroot. I later tried to update the software over wifi. It updated but in restarting its now stuck in boot screen and sometimes goes into recovery by itself. Is there a way I can revive the firmware? Any help appreciated
Click to expand...
Click to collapse
http://forum.xda-developers.com/chef-central/android/htc-desire-526g-bootloop-solution-t3241938
solve it by flashing rom using re recovery mode
I also got 526g+ totally finished only restarting I asked so many mobile repairing places no luck at all
PodolskiMeki said:
i've done the procedure but unluckly i'm still having this problem, did someone fix the loop with this method? should i just wait for custom roms? :crying:
Click to expand...
Click to collapse
Similar bootloop condition HTC 526g
wassti said:
Warning/Disclaimer: This will erase everything you have on the phones internal memory. (if you have play store set up right, you can just log back in afterwards and it will pull all your data/apps back, however if you don't, make sure to backup any contacts, data, ect that may be on the phones storage before attempting this) (then again, if you were already trying to root, you should have had everything backed up already anyway )
Charge the device to at least 50% (or an hour or two at least if the battery was completely dead)
Hold the Volume Down Button, Press power button, keep holding the volume down button
Phone should boot into HBOOT or Download mode,
use the volume up and down buttons to highlight Recovery Mode
press power button to select Recovery Mode
Phone will reboot with a red triangle icon, press all three buttons at the SAME time (vol up, vol down, power)
use the volume up and down buttons to highlight Clear Data (Factory Reset) press power button to select, let it finish clearing /data/ and /cache/
Once this has completed, Pull the battery out, let it sit for like 30 seconds without the battery
Put battery back in
hold power button for a while until it vibrates, release power button
let it sit at the htc boot screen for 10 minutes phone should eventually move to the verizon boot screen (if it goes over 10 minutes on the htc screen, try procedure again)
Post here if you have any trouble.
Click to expand...
Click to collapse
My phone was also rooted using kingroot. I received an OTA update and I downloaded it. Once the download was complete, the phone restarted and got bootlooped. Occasionally, it goes into recovery. I tried factory resetting it several times as mentioned in the solution. But each time I turn the phone ON again after factory reset, it is looping. Its not stuck at the boot logo. Instead it reboots automatically and in some cases to recovery. So the wait-for-10-mins thing is not working for me.
1. I received a stock ROM from the Russian section of XDA. Will flashing that ROM using the stock recovery using "install update from SD card" help me recover my phone from bootloop?
2. Will flashing the stock ROM unroot the phone? Presently, even after the factory resetting, "check the software partition" option in recovery returns a message "error - system has root". So I was hoping that unroofing might fix the problem. Will it?
3. If the above method fails, is there any other method? Like flashing a custom recovery or flashing a custom ROM etc?
Please help me fix the phone. Thanks in advance.
I am experiencing the same problem and have tried everything to avail, will this devise ever work again its still stuck with a white screen and green HTC
negomo said:
I am experiencing the same problem and have tried everything to avail, will this devise ever work again its still stuck with a white screen and green HTC
Click to expand...
Click to collapse
Hey negomo. I just fixed the phone yesterday. It seems that installing an OTA update while the phone is rooted can result in a bootloop or bricking(as in my case). I fixed this issue by flashing a stock ROM of the HTC 526g which I got from another Russian forum in XDA. Anyway I am posting the link of that stock ROM here.
( I am not allowed to post link. So please delete the spaces to get the actual link)
h t t p s :// yadi.sk/ d/gNKBahgZiwGmo
Once you download it do the following procedure
1. Copy it to an SD card and insert the card in your phone.
2. Press power button+volume up key button to enter HBOOT menu (while turning on the phone, press power and vol up button instead of power button alone)
3. Choose recovery option and press volume down to enter
4. Press power button once to enter recovery
5. Choose "install update from SD card"
6. Wait till it finishes installation
7. Wipe cache
8. Reboot phone
PS: I had already done a factory reset from recovery menu. I don't know if that had helped.
This will bring your phone back to life. Give around 10 mins for the first boot.
I hope I was able to help you.
Hit thanks if I did.
how to know my device 526g or 526
---------- Post added 24-06-2016 at 12:05 AM ---------- Previous post was 23-06-2016 at 11:51 PM ----------
https://www.imageupload.co.uk/image/ct0U
thx you are pro ??my problem solved ??

Categories

Resources