When phone goes into lock screen the power button wont bring it out of a black screen but menu buttons are lit up. Does anyone know how I can fix this?
tjmethod said:
When phone goes into lock screen the power button wont bring it out of a black screen but menu buttons are lit up. Does anyone know how I can fix this?
Click to expand...
Click to collapse
You can go to menu/settings/advanced(CM) settings/display/ then check screen on animations. Not sure which of his roms you are talking about but if it's one of his AOSP roms this will help.
reply
Hi thanks- ya there is no 'advanced settings' and the setting on animations is 'all animations' instead of no or some. I am just going to partition another card and get 'the express' rom which seems like the rom to have...
tjmethod said:
Hi thanks- ya there is no 'advanced settings' and the setting on animations is 'all animations' instead of no or some. I am just going to partition another card and get 'the express' rom which seems like the rom to have...
Click to expand...
Click to collapse
The Express is an awesome rom, you wont be disappointed.
Ya I tried to flash it last nite but my desktop is not recognizing any devices through usb which explains why I get an error that my printer is not connected when I try to use it... one thing after another
Sent from my SCH-I905 using XDA
Thanks man- I just reread your advice on animations and I think you meant 'no' animations instead of 'on'. I just set it to no animations and the home screen seems to come back now out of the time out screen. I have to hit the power button a few times, the lit menu buttons go out and when they come back on I've got a screen.
Do you know if I can install a blank sd card into the phone?- to partition to install 'the express' once I can flash it from my computer which is the only way I know how.
Thanks again,
Tj
tjmethod said:
Thanks man- I just reread your advice on animations and I think you meant 'no' animations instead of 'on'. I just set it to no animations and the home screen seems to come back now out of the time out screen. I have to hit the power button a few times, the lit menu buttons go out and when they come back on I've got a screen.
Do you know if I can install a blank sd card into the phone?- to partition to install 'the express' once I can flash it from my computer which is the only way I know how.
Thanks again,
Tj
Click to expand...
Click to collapse
No need for a new card unless your upgrading. Either way, if it is your current or a new sd, BACK IT UP TO THE PC first. And yes I saw that your pc is not recognizing the device, sounds like you will need to install the proper drivers (to your pc) for it to work. I would suggest going to this guide -> http://forum.xda-developers.com/showthread.php?t=1386911 I believe HipKat has all the steps for what your wanting to do, laid out much better than I can chicken peck on this keyboard, lol.
Good luck!
Jamie
Hey Jamie- I found since someone shut the pc down improperly that's what caused Windows to now recognize things- I actually just unplugged it and going to give it a few before plugging it back in. I should be good to go. The only other problem I am having since selecting no animTions is the display brightness is at the lowest setting. Trying to adjust/ autoi does nothing. Any advice on that one?- heading out for a late breakfast and going to flash the express when I get back but this phone is hard to.see till then for incoming calls- thanks god I have a tablet. Figuring how to.root that thing will be interesting.
tjmethod said:
Hey Jamie- I found since someone shut the pc down improperly that's what caused Windows to now recognize things- I actually just unplugged it and going to give it a few before plugging it back in. I should be good to go. The only other problem I am having since selecting no animTions is the display brightness is at the lowest setting. Trying to adjust/ autoi does nothing. Any advice on that one?- heading out for a late breakfast and going to flash the express when I get back but this phone is hard to.see till then for incoming calls- thanks god I have a tablet. Figuring how to.root that thing will be interesting.
Click to expand...
Click to collapse
Under settings/display de-select auto brightness. Should be a toggle in your power menu as well.
Sent from my PC36100 using Tapatalk
Hey thanks again Jamie- I had a new 8 gig micro sd card so I took my original out and put that in and partitioned as one tutorial had it laid out using Amon RA Recovery? The partitioning went well and I got the Express ROM on and installed nice except for a small issue the timeout or lock screen won't come out of lock screen unless I remove the the battery. I did what you told me to do on the Sinister ROM and switched the animations off and was able to come out of the idle or lock screen after about a dozen presses of the power button. Apparently it wasn't the Rom. Half the time I can't answer a call. I read a post on this site a last week on this same issue someone else had. The solution was some type of "pack" supposedly needed to be installed to the ext partition or something like that. I have tried to find that post ever since and cannot since. When I gohit 'search this forum' and the search field appears, the keyboard appears then disappears. Do youyou know anyone I maybe able to get into contact with that would be able to help me resolve this? So what type of devices do you have. I've also got the Samsung Galaxy 4G LTE 10.1 that I tether to which is nice.
I have been having a bit of a time finding solutions to certain things on here...
Tj
Sent from my SCH-I905 using XDA
Hey thanks again Jamie- I had a new 8 gig micro sd card so I took my original out and put that in and partitioned as one tutorial had it laid out using Amon RA Recovery? The partitioning went well and I got the Express ROM on and installed nice except for a small issue the timeout or lock screen won't come out of lock screen unless I remove the the battery. I did what you told me to do on the Sinister ROM and switched the animations off and was able to come out of the idle or lock screen after about a dozen presses of the power button. Apparently it wasn't the Rom. Half the time I can't answer a call. I read a post on this site a last week on this same issue someone else had. The solution was some type of "pack" supposedly needed to be installed to the ext partition or something like that. I have tried to find that post ever since and cannot since. When I gohit 'search this forum' and the search field appears, the keyboard appears then disappears. Do youyou know anyone I maybe able to get into contact with that would be able to help me resolve this? So what type of devices do you have. I've also got the Samsung Galaxy 4G LTE 10.1 that I tether to which is nice.
I have been having a bit of a time finding solutions to certain things on here...
Tj
Sent from my SCH-I905 using XDA
If you have your brightness set to the lowest, i've noticed that is what screws up unlocking for me. set your brightness higher as soon as you turn your phone on and see if that helps
Related
Can someone help me wipe my phone from recovery b/c i cant see anything on the screen but i do know the phone works and responds to touch?
I just need someone who can tell me exactly where to scroll in recovery to get to the wipe data/cache option.
Any help is very much appreciated
Unfortunately it may not be possible to help you navigate blindly because Clockword Recovery has a feature that places the confirm option among 10 choices to prevent accidental clicks. But from repeated tries it seems to come up in the same spot for me, so hopefully it might work for you.
So I can suggest that once you boot into recovery (volume down + power) and do the following.
- Press volume down 3 times and press trackpad, very very gently. Sometimes it registers a single click as two if you hold it for too long.
- Press volume down 7 times and press trackpad to confirm.
If it you select one of the "No" options on the confirmation page it will spit you back out to the main menu. So you press volume down 3 times, trackpad, volume down 7 times, trackpad.
Are you sure wiping your cache will resolve the issue you are having? It sounds like a screen defect or perhaps a resolution issue? Have you messed with your build.prop? If it doesn't work you may need to do some additional work from adb shell.
Thanks for the reply. I will try this as soon as I get back from class. I think it's a screen defect because the phone was working perfectly fine and when I came back to my phone after 10 minutes all I saw was a blank screen with the backlight on. I haven't messe with the build.prop. I have messed with the LCD density a couple times but I don't think that's what cause this issue. I just wanna try to clear all data I have on the phone so I can try to exchange it at a tmobile store lol. I know it won't fix the screen issue.
Thanks for helping. I'll see if it works. I do remeber that confirming wipe data and cache would also be the 7th option repeatedly.
Can you get into Fastboot?
Carloswithac said:
Can you get into Fastboot?
Click to expand...
Click to collapse
im not sure. i cant see anything on the screen
so, my rom did not back up and my phone on regular power on just stay on white sceen displaying htc, when i try recovery it says no images. i have a back up G2 and i am looking for a way to save the proper to the sd card so i can boot back up. any feedback would be awesome. thanks
O and I'm s on, so I guess I'm not rooted
Sent from my T-Mobile G2 using the XDA mobile application powered by Tapatalk
So I went into the T-Mobile store and got my g2 replaced
Jmsbishop, I'm new to this but ima try searching around and see what I can figure out to help you out.
Sent from my T-Mobile G2 using XDA App
My Epic's screen turned black yesterday for no apparent reason however the touch screen still works...
if i touch and scroll the lock up it still makes the sounds and i can guess were to touch to turn my alarm off on the black screen and that works, as all the buttons! i just cant see the screen anymore,
i did not install anything new, last thing i remember doing is just taking a picture. now i have a working phone with a black screen how do i fix this?
also, i cant even see the vol down camera power screen
help please
mrose61692 said:
My Epic's screen turned black yesterday for no apparent reason however the touch screen still works...
if i touch and scroll the lock up it still makes the sounds and i can guess were to touch to turn my alarm off on the black screen and that works, as all the buttons! i just cant see the screen anymore,
i did not install anything new, last thing i remember doing is just taking a picture. now i have a working phone with a black screen how do i fix this?
also, i cant even see the vol down camera power screen
help please
Click to expand...
Click to collapse
Can you get into download mode??
With the phone off .. Press 1 (on the keyboard) and power. If so, maybe try to odin back to EC05 stock
http://forum.xda-developers.com/showthread.php?t=1027904
good luck
If on boot after pulling battery it is still black and download mode shows nothing, and you have tried Odin (it works but you see nothing still) I am afraid you need to head to the Sprint store.
kennyglass123 said:
If on boot after pulling battery it is still black and download mode shows nothing, and you have tried Odin (it works but you see nothing still) I am afraid you need to head to the Sprint store.
Click to expand...
Click to collapse
Update: after ltting my phone sit on the charger for about 3 hours it came back on
BUT it went right back to the previous (working but all black screen) problem wen
i made a call which i now remember is what triggered it yesterday
I just tried getting into download mode and it did not work or show up
anyy further suggestions? if not can i ask the sprint store 4 help if i rooted my phone and unlocked it for boost?
PS. (i been making outgoin calls for months now n this never happened even with it rooted & inlocked)
thanx 4 taking the time to answer my questions
mrose61692 said:
Update: after ltting my phone sit on the charger for about 3 hours it came back on
BUT it went right back to the previous (working but all black screen) problem wen
i made a call which i now remember is what triggered it yesterday
I just tried getting into download mode and it did not work or show up
anyy further suggestions? if not can i ask the sprint store 4 help if i rooted my phone and unlocked it for boost?
PS. (i been making outgoin calls for months now n this never happened even with it rooted & inlocked)
thanx 4 taking the time to answer my questions
Click to expand...
Click to collapse
try to odin to ec05 stock ... leave your phone again for a while and see when you get your screen back if you can get to download mode and odin that stock rom ... this will allow you to see if it is something up with a rom you're running.
if it does it then, you'll be at stock so when you go to the sprint store; it won't be an issue.
jdelano said:
try to odin to ec05 stock ... leave your phone again for a while and see when you get your screen back if you can get to download mode and odin that stock rom ... this will allow you to see if it is something up with a rom you're running.
if it does it then, you'll be at stock so when you go to the sprint store; it won't be an issue.
Click to expand...
Click to collapse
I agree Odin back to stock is your best option and if that dosn't work you probaly stuck with a black screen!
Yes, if you got it to come on once by leaving it you should be able to do it again and Odin before making any calls.
I had no choice but to take it to the sprint store
they fixed it !!!
thankx again guys 4 all ur help!
mrose61692 said:
I had no choice but to take it to the sprint store
they fixed it !!!
thankx again guys 4 all ur help!
Click to expand...
Click to collapse
great news, glad you have a working Epic again.
mrose61692 said:
I had no choice but to take it to the sprint store
they fixed it !!!
thankx again guys 4 all ur help!
Click to expand...
Click to collapse
Hey, I know this is an old post but I have an old Epic I'd like to see if I can trade into for credit towards a Galaxy S III but I'm having the exact same problem as described here:
Softkeys light up, screen hepatic feedback "buzz" can be felt, can swipe to unlock and answer a call based on blind-memory of what to swipe but other than that, the screen is completely black. Not black as in lit up but devoid of any other color except black, but gone dark.
If it weren't for the softkeys being lit, I would assume the screen were either broken or disconnected from the motherboard somehow. There are no cracks in the screen. Phone has seen better days for sure but the screen is intact and all functions were working perfectly before it simply...blipped off in front of my eyes.
I've tried doing as you did: charging it for 3+ hours and seeing if that worked at least temporarily. No go.
Assuming our two phones were experiencing exactly the same issue, can you tell me when you had it repaired, if the issue was a hardware or software issue? If hardware, did they have to replace the screen? or was it merely not connected properly somewhere?
If it was a software issue, how did they repair it? I'm assuming I can, in fact, get the phone into download mode, but without a visible screen, I can't boot off of a zip file or see if any of my actions are successful. Can't be sure I cleared the caches properly before I proceed, etc.
Phone was last running toadlife's CleanGB prior to the FC09 update and I'm pretty sure, prior to EL30 (I can't remember but I'm pretty sure it was).
Again, I know this is old but any feedback would be appreciated.
navkat said:
Hey, I know this is an old post but I have an old Epic I'd like to see if I can trade into for credit towards a Galaxy S III but I'm having the exact same problem as described here:
Softkeys light up, screen hepatic feedback "buzz" can be felt, can swipe to unlock and answer a call based on blind-memory of what to swipe but other than that, the screen is completely black. Not black as in lit up but devoid of any other color except black, but gone dark.
If it weren't for the softkeys being lit, I would assume the screen were either broken or disconnected from the motherboard somehow. There are no cracks in the screen. Phone has seen better days for sure but the screen is intact and all functions were working perfectly before it simply...blipped off in front of my eyes.
I've tried doing as you did: charging it for 3+ hours and seeing if that worked at least temporarily. No go.
Assuming our two phones were experiencing exactly the same issue, can you tell me when you had it repaired, if the issue was a hardware or software issue? If hardware, did they have to replace the screen? or was it merely not connected properly somewhere?
If it was a software issue, how did they repair it? I'm assuming I can, in fact, get the phone into download mode, but without a visible screen, I can't boot off of a zip file or see if any of my actions are successful. Can't be sure I cleared the caches properly before I proceed, etc.
Phone was last running toadlife's CleanGB prior to the FC09 update and I'm pretty sure, prior to EL30 (I can't remember but I'm pretty sure it was).
Again, I know this is old but any feedback would be appreciated.
Click to expand...
Click to collapse
Hm, so you're saying download mode or recovery mode open up but with a black screen? But it still reads touches? My guess is it's hardware, a loose connection to the screen.
Yeeeeah, good luck towards funding your S3 purchase.
Sent from my SPH-D700 using XDA
I'm having this issue have my phone was dropped yesterday, so I'm quite sure it's a hardware issue.
I have two questions: can somebody be so kind as to give me the button sequence for how to make a nandroid of my phone? I have CWM 5.0.2.7 without the 'one confirm' option. That would be awesome. Also, is anyone familiar with taking the phone apart and perhaps how to fix this issue?
chillywings said:
I'm having this issue have my phone was dropped yesterday, so I'm quite sure it's a hardware issue.
I have two questions: can somebody be so kind as to give me the button sequence for how to make a nandroid of my phone? I have CWM 5.0.2.7 without the 'one confirm' option. That would be awesome. Also, is anyone familiar with taking the phone apart and perhaps how to fix this issue?
Click to expand...
Click to collapse
A guide to take it apart is here:
http://forum.xda-developers.com/showthread.php?t=1569701
and steps to nandroid
3 finger salute for about 5 seconds
toggle down 4 times hit cam button 2 times
tazfanatic said:
3 finger salute for about 5 seconds
toggle down 4 times hit cam button 2 times
Click to expand...
Click to collapse
Thanks tazfanatic. I tried the backup procedure and it didn't seem to work, and I think I actually have CWM 5.5. Is the procedure any different?
chillywings said:
Thanks tazfanatic. I tried the backup procedure and it didn't seem to work, and I think I actually have CWM 5.5. Is the procedure any different?
Click to expand...
Click to collapse
not sure 5.5? is that the touch version?
tazfanatic said:
not sure 5.5? is that the touch version?
Click to expand...
Click to collapse
CM9 version.
Sent from my PantechP4100 using xda premium
kennyglass123 said:
CM9 version.
Sent from my PantechP4100 using xda premium
Click to expand...
Click to collapse
Oh i have cm9 that is the direction I gave thought cm9 came with 5.0.2.7 my bag.
tazfanatic said:
Oh i have cm9 that is the direction I gave thought cm9 came with 5.0.2.7 my bag.
Click to expand...
Click to collapse
Indeed. I'm running CM9 beta 2, and I'm pretty sure it came with 5.5. However Taz, I believe if you boot into recovery from ROM Manger or the power menu, it still takes you into your previous recovery version (such as 5.0.2.7). Or vice versa. I don't remember. To my knowledge, this is has something to with the switch to MTD, and the devs just have reroute that command.
But regardless, I'm not getting a new backup on my SD card, so I'm pretty sure I'm on 5.5. Kenny, do you know if there's a different button sequence for 5.5?
5.5 is the same. I would remove the battery to make sure it is powered off. Put the battery back in, hold camera, volume down and power in that order (making sure power is last) for 5 seconds. wait 20 seconds to make sure it booted into CWM 5.5. Then volume down 4 times then camera twice. Depending on how many apps you got I would wait 30 minutes before pulling the sd card to check in clockworkmod\backup directory for a new file with current date code.
Hey everyone.. been around the forums a lot and, thanks to all of you, became fairly experienced in rooting, roms, clockwork mod and so on.. but lately I've been having some issues which I have not been able to find much in useful information...
First of all, my power button has decided that it would rather stay pressed all the time. I've tried many different suggestions I have read on many different forums in addition to XDA, with no luck. Since I am no stranger to taking things apart and electronics and such, I eventually decided to take the phone apart (using the Captivate I got free with the phone plan as backup) and attempt to clean out the button, along with some dust that had gotten behind the glass. This helped for a while, but wasn't perfect.. and the issue eventually came back full bore..
ANYWAY... until I can figure out how to replace the button... Does anybody know of an app that can either emulate the power button/bring up power menu, or just do a proper shutdown/reboot thats safe for data2__ type roms?
All I can do at the moment is either battery pull or Rom Manager.
Second... FYI the power button issue makes it VERY difficult to change out a corrupted memory card with ext partition with a new card without being able to cold boot the phone into recovery mode!! (because you can't select recovery from the HBOOT menu using the power button..)
Thank you so much for any help anyone can offer!
You try the app that says in this thread?
Screen off and lock and quick boot
To use last app you need to be root
cenyon said:
You try the app that says in this thread?
Screen off and lock and quick boot
To use last app you need to be root
Click to expand...
Click to collapse
Thank you for the suggestion
Yes, I have, but that app does the "hard reset/shutdown" (same way Rom Manager does it) that tends to not be good with the data2ext version I have been using :/
I suppose worse case I would have to just switch to a2sd+ rom.. from what I understand the hard reboot (and even battery pull) doesn't mess with those, correct? Still trying to wrap my head around all the different types. I like the data2__ stuff because it shows the actual available app space when using a widget like System Info
*bump*
Still looking for an app/widget that can bring up the Rom's actual power menu...
Is this even possible?
try PowerBoot
So i recently got a free upgrade to a inc 2 by turning my og inc in under warranty for a blow speaker (for the third time) and i naturally rooted it and installed a nice miui rom. Now about a month later im out of town for work and the screen has died. The phone is still operational, but the screen is black.
I am wondering if this could possibly a firmware issue? i have tried pulling the battery and booting into recovery but the screen is 100% useless. the touchscreen still seems to work, i can unlock it and answer calls ect...
My hunch is that its a hardware problem, but i'd like to try and flash it back to stock if possible to eliminate the possibility of a rom issue.
Does anyone know a way to flash a rom onto it without the use of the screen?
Can i use the HTC sync tool to set it back to stock like i could with the OG incredible?
Any help is much appreciated, i'm pretty desperate here.
if it was me, I'd flash it back to stock using a ruu file, then do a warranty claim, cause then if it's a firmware/software issue the ruu will fix it. There's a thread somewhere around that has instructions to do that, give me a minute...
Edit -found it! Here ya go- http://rootzwiki.com/topic/1579-how-to-restore-to-stock-from-alpharevx-incredible-2-vivow-only/page__st__53
Sent from my Incredible 2 using xda premium
ok, so my new issue is that if i flash the ruu, and the screen still doesn't work, i'll be stuck at the setup wizard right? then i won't even be able to use google voice to make calls from my laptop. i guess ill have to wait till i get home, this would be so much easier if my pos nextel work phone had service out here in wyoming.
Yea, that's a tough one, I definitely wouldn't flash an RUU for the exact reason you bring up.
One option, although it isn't without it's own challenges, would be to try to install a VNC server on your phone, so you could then connect to and use it through a desktop computer. You could probably install it easy enough through the Android Market web site. Here's one: https://play.google.com/store/apps/details?id=org.onaips.vnc
If you download the Android SDK (http://developer.android.com/sdk/index.html), connect your phone to your computer, open a command prompt and run ddms, it'll bring up the Dalvic Debug Monitor. Here, you can go to Device>Screen Capture and it'll bring up a window showing the screen of your phone. There's a refresh button which will refresh the screenshot. It'll be a little hit or miss, but you should be able to reference the screenshot to tap on your blank screen to open the VNC app, hit the start server button, and then see what IP/port it's listening on.
Once you get the VNC server running and connect, you should be able to use the phone fairly easily, although if the screen is dead even during boot (no initial boot screen, no display in h-boot) it would seem like a hardware problem and there's probably not much you can do about it.
ChrisDDD said:
Yea, that's a tough one, I definitely wouldn't flash an RUU for the exact reason you bring up.
One option, although it isn't without it's own challenges, would be to try to install a VNC server on your phone, so you could then connect to and use it through a desktop computer. You could probably install it easy enough through the Android Market web site. Here's one: https://play.google.com/store/apps/details?id=org.onaips.vnc
If you download the Android SDK (http://developer.android.com/sdk/index.html), connect your phone to your computer, open a command prompt and run ddms, it'll bring up the Dalvic Debug Monitor. Here, you can go to Device>Screen Capture and it'll bring up a window showing the screen of your phone. There's a refresh button which will refresh the screenshot. It'll be a little hit or miss, but you should be able to reference the screenshot to tap on your blank screen to open the VNC app, hit the start server button, and then see what IP/port it's listening on.
Once you get the VNC server running and connect, you should be able to use the phone fairly easily, although if the screen is dead even during boot (no initial boot screen, no display in h-boot) it would seem like a hardware problem and there's probably not much you can do about it.
Click to expand...
Click to collapse
Yeah i think i'm hosed, i have no screen at all, i can't get the ruu to run, it comes back saying i have the wrong device. i guess im just gonna send it back and hope they don't notice.
captainlovesac said:
Yeah i think i'm hosed, i have no screen at all, i can't get the ruu to run, it comes back saying i have the wrong device. i guess im just gonna send it back and hope they don't notice.
Click to expand...
Click to collapse
Where is it indicating that it's the wrong device if you have no screen?
Please Delete Post
I ran into a similar problem with black screen over the weekend.
However my phone was not rooted.
This is how it happened.
I was using my phone then I saw the screen flicker once or twice, then it went black.
I pulled out the battery and powered up again.
The phone vibrated, and after a while the four bottom buttons light up.
The volume keys work and I could receive incoming calls, but the screen just stays black.
One thing to note is that my pocket was a little wet before I pulled out the phone to use.
Also that I did use my phone for a good 5-10 mins before it went black.
What I am trying to determine is if it is a software issue or hardware.
Are the bottom button lights separate from LCD screen, so that even if they light up it could still mean LCD is bad?
Any help would be appreciated, thanks!
This is a new phone and it's happened 1/2 a dozen times or more. With good battery life remaining, I'll check the phone to find it powered off (black screen). The power button will not turn it on. I need to remove the battery for a few seconds, reinstall the battery, then it boots fine. Been on ICS FI27 since I got the phone. I'm now rooted with the stock ROM, but this issue was happening prior to the root too. Any suggestions? I'm considering calling Samsung, perhaps I got a buggy phone? Thanks.
Re: Random power off - requires soft reset
Check the battery, take the battery out and spin it, if it spins you may need a new battery.
Also the power button is known to be non functional sometimes due to a number of reasons including software and hardware.
If you just got it try and exchange it. Good lock
Sent from my SPH-D710 using xda app-developers app
Thanks for the tips. I really don't think it's the battery. I have another EP4GT that I use for work and I've swapped batteries. Had the same problem with either battery and never had the problem on the work phone at all. It happened again today. Really frustrating since it could happen in a emergency. I'll prolly holler at Samsung later this week if I get the time.
Found a thread on the Sprint Community Forums that discusses several variations of the reset issue quite extensively. I have a feeling it could be caused by my MicroSD card. I've formatted my MicroSD and will report back with my findings. Sorry I can't post links yet, but you can Google "samsung epic 4g randomly powers off"
createatodo said:
The power button will not turn it on. I need to remove the battery for a few seconds, reinstall the battery, then it boots fine.
Click to expand...
Click to collapse
Just a semantic clarification here. You are describing a hard-reset, not a soft-reset. A soft reset uses the power button (which uses the OS, i.e. "software") to reset, whereas a hard reset means forcing the phone to power off (by hardware manipulation - i.e. pulling the battery).
Hi Matt, thanks for the clarification. If I could go back and edit my title I would.
Since I've formatted the MicroSD I haven't had any more power off issues. I'll report back if I do. Thanks.
createatodo said:
Hi Matt, thanks for the clarification. If I could go back and edit my title I would.
Since I've formatted the MicroSD I haven't had any more power off issues. I'll report back if I do. Thanks.
Click to expand...
Click to collapse
You can edit the title by editing the post and clicking "Go Advanced" to reach the full page editor.
garwynn said:
You can edit the title by editing the post and clicking "Go Advanced" to reach the full page editor.
Click to expand...
Click to collapse
Thanks garwynn for the instructions - I did just that!
On another note, I had another lock up today, but this time different or at least something I have not noticed before. I got a message notification tone from the eBay app. I went to check it and the screen would not come on when pressing the power button, however the red LED was still blinking. I've never had the red LED in the past, just a black screen with no response. I had to remove the battery and reboot. Maybe just a fluke with the app this time? I read through some reviews of the eBay app and didn't really find anyone mention issues with the notifications. Oh well, I'll keep an eye on it and report anything else. Thanks.
createatodo said:
Thanks garwynn for the instructions - I did just that!
On another note, I had another lock up today, but this time different or at least something I have not noticed before. I got a message notification tone from the eBay app. I went to check it and the screen would not come on when pressing the power button, however the red LED was still blinking. I've never had the red LED in the past, just a black screen with no response. I had to remove the battery and reboot. Maybe just a fluke with the app this time? I read through some reviews of the eBay app and didn't really find anyone mention issues with the notifications. Oh well, I'll keep an eye on it and report anything else. Thanks.
Click to expand...
Click to collapse
If you're rooted can you pull a logcat? Maybe that will have some clues as well...
garwynn said:
If you're rooted can you pull a logcat? Maybe that will have some clues as well...
Click to expand...
Click to collapse
I am stock rooted using Odin one-click. I checked using the Superuser app, but didn't see any useful logs there. Would I need to purchase Superuser Elite to pull the logs your are referring to? Thanks.
createatodo said:
I am stock rooted using Odin one-click. I checked using the Superuser app, but didn't see any useful logs there. Would I need to purchase Superuser Elite to pull the logs your are referring to? Thanks.
Click to expand...
Click to collapse
I was able to pull logs using the terminal app on my AOSP build. The steps are just:
Code:
su
logcat
su for root permissions, and logcat to get the log.
You might have to find a terminal emulator to be able to do that though. I don't recall the TW ROMs having one installed by default.