Can anyone verify any horizontal leather belt clip cases that will work with a tpu case? Had this setup on my last phone and was mint got nearly two years.
Sent from my SCH-R760 using Tapatalk 2
I have the same setup.
Via eBay I purchased this case and it's a very good fit but a tiny bit loose.
http://www.ebay.com/itm/ws/eBayISAP...&sspagename=STRK:null:IT&orig_cvip=true&rt=nc
http://www.amazon.com/gp/product/B0042LM6QY/ref=oh_details_o06_s00_i00
This is what I'm using currently - the belt loop is surprisingly strong and versitle - I'm more used to a clip and was originally going to purchase the clip for this if the pouch wound up working well but the clip is completely unnecessary in this case!
I went with this one:
http://www.amazon.com/gp/product/B003XKS4WA/ref=oh_details_o00_s00_i00
Purchased it in September of 2011. Works well with a TPU case. Clip holds up well, and it also has additional two belt loops. It's large enough that I can even squeeze a little mini keyboard in (elastic on the sides) but it fits almost perfectly just the E4GT with TPU case.
someone at a yardsale fleamarket kind of thing has those REIKO cases and they had one that FIT my GSII "INSIDE" its hybrid hard/silicone case !! like a freaking glove. like it was freaking designed for it !!
and he only got one (my brother) I was going to eat him on the spot for that!
so now I have to stalk the fleamarket and hope the guy comes back and has more of them
Will any of these fit with a Ballistic case? I don't like carrying it in my pocket.
any vertical pouches?
I use this one with a TPU case. I thought the fit was very well.
http://www.amazon.com/gp/product/B0044WJUDS/ref=oh_details_o01_s00_i00
I purchased the case jrodd suggested and I am pleased with it. It fits well with a tpu case or a light hybrid case. It would probably be to lose with no case at all. I am using this case I purchased off Ebay with it and am very happy with it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for the help.
Sent from my SCH-R760 using Tapatalk 2
Related
going to look for a leather holster for my phone, I think. don't like cases much, like holding only the phone in my hand when i'm using it. anyone have a good one?
one option with removable plastic clip (downside is losing the clip); not sure I like the light tan inside:
http://www.hedocell.com/default.asp?rfid=GB&prodid=33589885&country=US&gbid=HD33589885-10317
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
a bunch of other leather cases on sale here, probably the best prices you'll find; can't be sure of the quality though.
A couple nice ones, I like the vertical one (nice and small) but I need a belt clip for work, wish you could combine the two. both are a little pricey.
http://shop.htcpedia.com/index.php?dispatch=products.view&product_id=839 19.99
http://shop.htcpedia.com/index.php?dispatch=products.view&product_id=837 24.99
I posted this over in a another thread but I bought a Eddie Bauer holster from Best Buy and it fits great. However you cant use a case, hard or gel on it. Reading what you posted you dont use one anyway. Good Luck
Holster
I'm still on the hunt for a leather holster too. My problem is I'm using a Seido Innocase like the one below for everyday wear on a seido belt clip holster, but need a leather holster for tougher environments so I'm hoping to find a case that will accommodate the increased dimensions of the seido case:
I like the Cellet Bergamo mentioned above but not sure if it'll fit.
I also like the selection at fommydotcom (sorry, as a new user i'm not auth to provide links)
Does anyone have insight into any of these holsters? Thanks.
Didn't really see anyone get something like this, so I ordered it and I'll review it once it gets here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Leather case
I also ordered this armband, so i'll review that too.
Armband
Thanks for the effort here, and the expense put into it. I havent seen the arm band before - I have seen the leather cases, and have wondered how they fit and how well they protect. Looking forward to your reviews.... post up some pics too?
I have purchased 3 or leather holsters from ebay for my Atrix.
Still haven't found anything I liked.
Got the leather case (1st one) depicted today. It is a good case for being under $10, but I was disappointed when I overlooked the fact that it doesn't have a cut out for the power button / fingerprint scanner! I just cut one with an craft knife, but would not recommend the case because of that. Still waiting on the second one. (Should upload pictures soon)
The arm band looks interesting. Will the phone fit in it with case on like the otterbox commuter?
Sent from my MB860 using Tapatalk
Kinda figured there wouldn't be a cutout for the power button/fingerprint reader based on the pictures of it. Though, i kinda find it funny that i can't seem to click on the different pictures on their page to get a better view. Unless it's just an issue with Chrome.
I'm actually quite a fan of Pure.Gear's leather snap-on case. At first i wasn't sure about it... but after using it... it's quite nice. slippery enough to slide into your pocket... yet enough grip that when holding it, it doesn't feel like it's going to slide out of your hand. fair bit thicker than the other snap-on cases made by Pure.Gear...
This is the Qubits Snap-On case for the GSM Galaxy Nexus.
This does not fit the Verizon LTE version.
It is very similar to the Incipio Feather and the Case-Mate Barely There.
http://www.amazon.com/SAMSUNG-RUBBE...9UWU/ref=sr_1_4?ie=UTF8&qid=1324590852&sr=8-4
The case fits perfectly and is very snug. The case has a rubberized coating on the inside and outside of the case. There is a small lip on the front of the device for minimal lay-on-the-table design. The side edges are very smooth, but the top and bottom edges are a tiny bit rough. It isn't uncomfortable, and I don't really mind. With this design, the top and bottom are halfway exposed, but comparing with the Feather, it does cover more. The case is fairly thin, but not as thin as the Feather. Basically, this just gives me more grip to hold the phone.
It is only $8.90 with prime shipping, a great value IMO.
BTW I have a skinomi screen protector on at the moment, but will be applying XO Skins very soon.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yeah its a nice casae....I have one but i have the LTE version. I bought this not even paying attention. If anyone wants it, ill ship to to ya and take a $5 paypal. Sorry to hijack yur thread. Figure it was better than creating one in the "want to sell" forums for jusgt one case....Thanks guys...PM if u want this
I got it for only around $5 from Amazon. But after one or two days of usage I found it too slippery. I'm waiting for mesh case they provide more grip IMO
Is there gonna be any mesh cases available?
Sent from my Galaxy Nexus using xda premium
I bet there will be, but don't know who will make them.
Sent from my Galaxy Nexus using XDA App
Hi, are there any suggestions on cases I should get from eBay that are thin and protects the front? I might get a bumper or just whatever... Any suggestions?
Dratini said:
Hi, are there any suggestions on cases I should get from eBay that are thin and protects the front? I might get a bumper or just whatever... Any suggestions?
Click to expand...
Click to collapse
No thin case will totally protect the phone from drops. Just my .02
Total protection = bulky cases.
What you need to look for is something that the inside edges are noticeably raised on the front.
I like my Trident Kraken because ita 3 cases in 1. I don't have to make it aa bulky when I dont need it.
Sent from Pluto.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Diztronic available on Amazon for about $10.
firetruck41 said:
Diztronic available on Amazon for about $10.
Click to expand...
Click to collapse
This will only help if you drop your phone on a perfectly flat surface as the front lip is not that high. If there is a small rock or the area is uneven at all it most likely won't help. Take if from someone that cracked is screen with a TPU case on it.
Get better protection if your prone to drops. This screen shatters EXTREMELY easy.
Dratini said:
Hi, are there any suggestions on cases I should get from eBay that are thin and protects the front? I might get a bumper or just whatever... Any suggestions?
Click to expand...
Click to collapse
i just ditched my otter box commuter for a body glove tactic case. offers about the same protection but feels less bulkier. the buttons aren't a p.I.t.a. to press either
I just received my Waterfield Designs Slip Case for the Nexus 7. It's an incredible slip case of very high quality. I am a minimalist when it comes to cases, and so far I have been dissatisfied with the Moko Slim-Fit & Poetic Slimline cases I have received. The Moko is just too large, and it drives me nuts that it doesn't sit flat when opened. The Poetic feels cheaply made, and I don't like how difficult it is for me to remove it from the case. I also don't like the feel of the fake leather of the Poetic case.
I decided to try out a slip case, and found the Waterfield Slip Case. It's definitely more expensive than the other cases I've tried, but it is so pleasant to hold and use. The outside of the case is so soft to the touch, but extremely durable. The inside is extremely soft, and really does clean the screen when you remove it. The tablet fits very snug in it, but just snug enough so that when you hold it upside-down and shake it there is no fear that it will fall out.
Here are a few pictures I took, along with the video on their website discussing the slip case. I would highly recommend this at $27.
If you have any questions or would like some additional pictures, please let me know.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I recommend it!
I've been thinking about buying one of these. Don't mind the higher price considering they are made in San Francisco!
Would you mind measuring the thickness of the case when your nexus 7 is inside?
OJ in Compton said:
I've been thinking about buying one of these. Don't mind the higher price considering they are made in San Francisco!
Would you mind measuring the thickness of the case when your nexus 7 is inside?
Click to expand...
Click to collapse
It's a little tricky to measure the thickness, since the case is puffy. If I squeeze it flat (Sort of like it would be in my pocket), it's just under 5/8". If I let it sit normally on my desk, it's just over 7/8".
That's exactly what I needed, thanks!