not be responsible nor liable for any damage that might happen to your device during this process though the possibility of any damage is negligible. Try this at your own risk. This process has been tested and verified working on Samsung Galaxy Y.
Overclocking Galaxy Y
What is overclocking?
Overclocking a process to raise your phones power over the limits imposed by the manufacturer. When more power is increased more it will heat up the processor but the system will run faster. On computers is common, from slight increases, sometimes even made up extreme overclocking, cooling systems using large and expensive overcoat. In our cell, which is what we want, we can slightly increase the power of the processor through different software and of course, we must have root privileges.
How to do it ?
1. Download OVERCLOCK below
2. Copy it on you sdcard
3. Switch off your phone
4. Press volume up key + power key + home button
5. Now you are in recovery mode
6. First do wipe data, then wipe cache
7. Then click on second option which instal update from sdcard
8. Select that file from sdcard use volume up key for up and volume down key for download and for select use home botton
9. Then restart you phone by pressing first option.
10. Wait because phone takes time to start
11. Follow screen instruction then download CPU MASTER below
*NOTES:
IT WORKS IN STOCK ROM AND ANY OTHER ROM
Credits goes to Maroc-OS and GalaxyYarena
OVERCLOCK:
http://*******/403679/http://www.mediafire.com/?au7msanz6nz930z
CPU MASTER:
http://*******/403679/http://www.mediafire.com/?b49j5dfhxpes5a5
bad manners to post someone's creation by renaming it... u should take permission before sharing it on ur free will.... ty but OC IS CURRENTLY NOT WORKING ON SGY
Srry but there is people want it
P.S: i am noob here .... sry again
Sent from my GT-S5360 using xda premium
gelouwk said:
Srry but there is people want it
P.S: i am noob here .... sry again
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
No problem buddy
got stuck on samsung logo boot!
pulled out the battery and same thing.. stuck..
im using repencis kernell, repencis rom v3.5
xylu said:
got stuck on samsung logo boot!
pulled out the battery and same thing.. stuck..
im using repencis kernell, repencis rom v3.5
Click to expand...
Click to collapse
old....
gimme something new
that's beta version of merruk kernel. too many bugs. don't ever use it.
kurotsugi said:
that's beta version of merruk kernel. too many bugs. don't ever use it.
Click to expand...
Click to collapse
thanks sir.. its good i have a back up.. :good:
flash samsung galaxy y s5360 using odin
Hi friends,
Today iam showing u how to flash stock rom of samsung galaxy y s5360
1.Download and extract flash files
2. Run odin.Make sure you turn off antivirus & kies
3.Install the Samsung Drivers to connect your phone with USB Cable.
4. Restart your phone in Download mode. Press Volume Down+ Home + Power button together.
5. Open the Odin tool and then connect your phone via usb cable.
(Odin will detects your phone, and shows the message Detected with Yellow background)
6. After that Select PDA and Choose the PDA file that you extracted
7. Then Click Phone and select the File named as Phone or Modem.
8. And then Click CSC and select the file named as CSC.
(Leave other fields empty)
9. Click Start button.
Wait for the process to end.
(After the process is done, you will see the message PASS with green background)
10. your phone restarts and u see logo of android touch on it to begin
Thats all...
Now you successfully flashed Stock ROM (Firmware )on your Samsung Galaxy Y.
NajuAynr said:
Hi friends,
Today iam showing u how to flash stock rom of samsung galaxy y s5360
1.Download and extract flash files
2. Run odin.Make sure you turn off antivirus & kies
3.Install the Samsung Drivers to connect your phone with USB Cable.
4. Restart your phone in Download mode. Press Volume Down+ Home + Power button together.
5. Open the Odin tool and then connect your phone via usb cable.
(Odin will detects your phone, and shows the message Detected with Yellow background)
6. After that Select PDA and Choose the PDA file that you extracted
7. Then Click Phone and select the File named as Phone or Modem.
8. And then Click CSC and select the file named as CSC.
(Leave other fields empty)
9. Click Start button.
Wait for the process to end.
(After the process is done, you will see the message PASS with green background)
10. your phone restarts and u see logo of android touch on it to begin
Thats all...
Now you successfully flashed Stock ROM (Firmware )on your Samsung Galaxy Y.
Click to expand...
Click to collapse
Have u ever searched before posting.??
There are numerous thread regarding it...:sly:
** rooting is new for me,
nd i am a noob to root....**
I think it takes more battery.
ROM: JellyBlast
Deleted
Sent from my GT-S5360 using xda app-developers app
overclock link error
I tried the link at the top..its not working .. gives an error message.. dont know why..
another thread worthy in the trash bin
with the help of a custom kernel galaxy y can b overclocked to 1.248 GHZ
abhisek de said:
with the help of a custom kernel galaxy y can b overclocked to 1.248 GHZ
Click to expand...
Click to collapse
Use merruk kernel. But it is very buggy.
Sent from my highly pimped Galaxy Pocket.
1. Love doesn't need any reason.
2. Wanna speed up 3G (not 4G LTE)?
Here it is:
http://forum.xda-developers.com/showthread.php?t=2586876
Am I losing data
Hello!
I'm on Savie #73 kernel and Hyperion 8 GM Final and I'm wondering do I really need to wipe cache and data because I don't want to lose data. I know that there is no big difference after overclocking but I would like to try. I have read that some people have ended to a bootloop after this guide. Is that bacause they didn't wipe cache and data?
And yes, I have done nandroid backup but it is not gonna bring linked apps (by link2sd) back...
Use black reactor kernel or Jarvis the stock version and flash them normally
Sent from my GT-S5360 using Tapatalk 2
mohamedrashad said:
Use black reactor kernel or Jarvis the stock version and flash them normally
Click to expand...
Click to collapse
you
I don't understand. Are you saying that black reactor and jarvis (the stock?) include the possibility to overclock to 900Mhz like merruk have possibility to overclock to 1.2Ghz? If I flash for example black reactor kernel then I dont't need to flash the OVERCLOCK.zip file? Do you mean that after I flash black reactor kernel I can just instal setcpu and overclock my s5360?
BUT...
If I want to stay on Savie #73 can I just flash overclock.zip without wiping data and cache safely? That is what I meant last post.
Vohukain said:
you
I don't understand. Are you saying that black reactor and jarvis (the stock?) include the possibility to overclock to 900Mhz like merruk have possibility to overclock to 1.2Ghz? If I flash for example black reactor kernel then I dont't need to flash the OVERCLOCK.zip file? Do you mean that after I flash black reactor kernel I can just instal setcpu and overclock my s5360?
BUT...
If I want to stay on Savie #73 can I just flash overclock.zip without wiping data and cache safely? That is what I meant last post.
Click to expand...
Click to collapse
i tried jarvis and black reactor, just mount data in recovery and flash it, go to set cpu and over clock to 1.2 Ghz or 900 mhz
Related
How to Unbrick Samsung Galaxy Gio
If your phone doesn’t boot into download mode and you have a black screen after flashing anything wrong. Here's how you unbrick it; worked for me
==Method 1:==
Prepare ODIN with the firmware you want to flash (in my case was Gingerbread 2.3.4) and get it ready to go.
-
Remove battery, wait for a bit. Insert battery again.
-
Flash a recovery with your specific filesystem (EXT4 or RFS)-(If you have EXT4, download ext4 only, don't get ext4+rfs)
-
Enter recovery & Wipe | Format:
System
Data
Cache
Dalvik Cache
Have ODIN ready. Connect phone to PC.
-
Reboot to Download Mode
Hold Volume down + Power + Home button at the same time.
-
At this point Odin should have detected your Galaxy Gio (Yellow rectangle should appear).
-
Insert the Stock Rom or Custom Rom.
-
Click Start button in Odin and wait about 5 min.
-
Reboot and wait
If all goes well it should come back to life.
If not, repeat the steps above ^ (Atleast 2x)
Download ODIN 4.42
Download OPS Only
Download DRIVER Only
==Method 2==
Here's a video using a USB Jig to Unbrick
nggabi said:
if u brick with rom manager you can use only jtag box.
Click to expand...
Click to collapse
www.jtagbox.com/
==Method 3==
You can try: One-Click UnBrick by AdamOutler
====================
Detailed procedure using ODIN HERE
==List of Stock Roms for GIO==
Password: samfirmware.com
OR
Password: sampro.pl
Recovery mode and the download does not turn on my phone is not charging will not load in this case is, this process recovers the phone with Kies was updating the brick?
thank you
Martin Riggs(Yunus) said:
Recovery mode and the download does not turn on my phone is not charging will not load in this case is, this process recovers the phone with Kies was updating the brick?
thank you
Click to expand...
Click to collapse
It was hard to understand but did you mean: "Recovery mode and download mode does not work on my phone. It's not charging in this case. Does this process unbrick the phone with kies?"
Still hard to understand what you mean, did you brick your phone when trying to install clockworkmod?
iok1 said:
It was hard to understand but did you mean: "Recovery mode and download mode does not work on my phone. It's not charging in this case. Does this process unbrick the phone with kies?"
Still hard to understand what you mean, did you brick your phone when trying to install clockworkmod?
Click to expand...
Click to collapse
No, I never turn on my phone. charge can not Kies program and installing the official 2.3.6 TUR after download article but the phone does not open
Martin Riggs(Yunus) said:
No, I never turn on my phone. charge can not Kies program and installing the official 2.3.6 TUR after download article but the phone does not open
Click to expand...
Click to collapse
Try this:
Take out battery and wait for a while. Then put it back in.
Now, again, take out battery and wait for a while. Then put it back in.
Now try Download mode
Peteragent5 said:
Try this:
Take out battery and wait for a while. Then put it back in.
Now, again, take out battery and wait for a while. Then put it back in.
Now try Download mode
Click to expand...
Click to collapse
Thank you!
but, how often the?
the exact solution?
No signs of life My Phone
Charge the phone using your charger
Sent over Electromagnetic Waves
This thread is useless without this info:
Howto brick a gio
1. Erase efs and bootloader partition
2. Have fun!
Sent from my hexacore rooted toaster with xdatoast premium
Peteragent5 said:
How to Unbrick Samsung Galaxy Gio
If your phone doesn’t boot into download mode and you have a black screen after flashing Froyo or GB here's how you unbrick it, it worked for me .
Step 1 – Prepare odin with the firmware u want to flash (in my case was gingerbread 2.3.4) and get it ready to go;
Step 2 – Remove battery, SIM and SD card, next connect your Galaxy Gio to the computer;
Step 3 – Hold Volume down + Power + Home button at the same time;
Step 4 – Insert the battery and wait a bit;
Step 5 – At this point Odin should have detected your SG Gio ( Yellow rectangle should appear);
Step 6 – Click Start button in Odin and wait about 5 min.
If all goes well it should come back to life.
If not, enter the Stock Recovery and Wipe Data and Cache, then repeat the steps above ^
For a detailed procedure using ODIN look HERE
List of Stock Roms for GIO
Grab this tool to flash the stock ROM:
ODIN Multi Downloader v4.42
OPS File: GIO_v1.0.ops
Driver: GIO_Driver
Or to Download Odin and Gio.ops only (No Driver Included) Download HERE
PS. The correct Asia Gingerbread firmware is this one:
S5660DXKT4
Password: samfirmware.com
OR
Password: sampro.pl
Click to expand...
Click to collapse
well mine its not thata bad , i did the flash with odin but it keeps restarting , start image then goes back to logo and so on , what can ido? thanks
jaibobro said:
well mine its not thata bad , i did the flash with odin but it keeps restarting , start image then goes back to logo and so on , what can ido? thanks
Click to expand...
Click to collapse
Go to recovery and wipe data/cache
Sent from my GT-S5660 using xda premium
I have done anything, but my phone has still a bootloop with every rom.
WietsedeVries said:
I have done anything, but my phone has still a bootloop with every rom.
Click to expand...
Click to collapse
That's good!
As in: your phone still has life!!
Does stock Rom work for you? Reflash it but you MUST wipe Data and Cache using the STOCK recovery before you reflash Stock!!
Remember to follow flashing instructions posted by the Dev!
Peteragent5 said:
That's good!
As in: your phone still has life!!
Does stock Rom work for you? Reflash it but you MUST wipe Data and Cache using the STOCK recovery before you reflash Stock!!
Remember to follow flashing instructions posted by the Dev!
Click to expand...
Click to collapse
I have stock now on it, but I haven't wiped Data and Cache with the stock recovery, because I use CWM. This afternoon I will try to do it with the stock recovery.
Now I have wiped everything with the stock recovery, and then I tried to install the stock rom. I still have the bootloop. I really don't understand it. It has to work...
//When I click on "test redbend fota[FS]" in the stock recovery I get this error:
-- Update from RB Fota
E:failed to mount /data (invalid argument)
E:install_fota:Can't unmount /data
Can't mount data partition ...
Installation aborted
Click to expand...
Click to collapse
any options if I can;t get into recovery, boot, and odin is stuck at downloading the first file in any .tar.md5 ?
kinda bricked my phone, odin doesn't do anything.
voetbalremco said:
any options if I can;t get into recovery, boot, and odin is stuck at downloading the first file in any .tar.md5 ?
kinda bricked my phone, odin doesn't do anything.
Click to expand...
Click to collapse
Is that tar.md5 stock rom?
lemmymet said:
Is that tar.md5 stock rom?
Click to expand...
Click to collapse
Fixed it, dont know how..
Sent from my GT-S5660 using xda premium
Take out the. md5 from the file
Fixed it already
Sent from my GT-S5660 using xda premium
I´m having the same problem. How did you solved it?
Thanx in advance
JIUI v4(MIUI v4) & JWP7(Windows Phone 7 MOD): http://forum.xda-developers.com/showthread.php?p=26890050#post26890050
ROOTING Your DEFY/DEFY+
1.Download SuperOneClick from http://www.multiupload.nl/NQNSU63VXH
2.Turn On usb debugging mode in your phone.Don't put phone USB mass storage mode.
3.Connect your phone to your pc.
4.Open SuperOneClick as Administrator.
5.Click ROOT and wait. If it asks whether you wish to install Busybox etc, give yes or ok.
6.Once root is complete you will get a pop up asking whether you wish to donate. Make a choice.
7.At last you will find a line on the right side pane saying to reboot. Reboot your phone. Now your phone is rooted.
It won't get bricked, if it does get bricked(You will be stuck in MOTO logo or Andorid animation will stop abruptly and will start animation again(Nothing will work).Don't get scared
FLASHING WITH STOCK ROM
1.Download and install usb driver from here http://www.motorola.com/consumers/v/index.jsp?
vgnextoid=9691071a275b0210VgnVCM1000008406b00aRCRD
2.Download the sbf file from here
DEFY: http://sbf.droid-developers.org/umts_jordan/list.php (Based on your choice)
DEFY+: http://sbf.droid-developers.org/umts_jordanplus/list.php (Based on your choice)
3.Download RSD Lite from here http://www.multiupload.nl/8KGA2FPSMI
4.Remove your battery.
5.Press and hold power button and vol + button.
6.Put the battery back holding those buttons.
7.Now your phone will start and a blank screen will appear, now release those buttons. It will show the Bootloader.
8.Connect your phone via USB,now bootloader should display Transfer Mode:USB.(Drivers might install in your PC.If it install,wait till installation completes).
9.Open RSD Lite as administrator.
10.Hit show devies. Now your device must be displayed(If not drivers were not installed. Check for it.)
11.Now choose the sbf file.
12.Hit start. Be patient it will take some time.
13.Sometimes your phone reboots automatically and result column will say pass. If that doesn't happen,it will ask you to reboot manaully and your phone will be stuck in MOTO logo.
- Now remove your USB cable and remove battery. Hold power button and vol + button, you will get that screen.
- Now connect usb, now it result should say pass.
- Press the power button and start the phone. First boot will take some time (Min of 10 minutes or more).
If you are still stuck in bootloop
1.Remove your battery.
2.Hold the power button and vol - and put the battery.
3.You will enter into Motorola stock recovery.
4.Give factory rest and wipe cache.
5.Reboot your phone. This time it should work, else one again flash the sbf using RSD Lite.
ANY BROKEN LINKS!! PLEASE REPORT.
I've a red lensed defy. Any special thing to do about it?
Sent from a button.
pacificmg said:
I've a red lensed defy. Any special thing to do about it?
Sent from a button.
Click to expand...
Click to collapse
No. Use superoneclick it will work.
root
will it works on dfp 231 or bl7 ota roms with new 2.3.6
ftpankaj said:
will it works on dfp 231 or bl7 ota roms with new 2.3.6
Click to expand...
Click to collapse
No. You should use this http://forum.xda-developers.com/showthread.php?t=1595013
-help-
my defy got stuck on moto logo and I tried to get into stock recovery.
when i press - volume botton and power the phone shows me a triangle with android beneath it as if it had an error...
please help
natanhel said:
-help-
my defy got stuck on moto logo and I tried to get into stock recovery.
when i press - volume botton and power the phone shows me a triangle with android beneath it as if it had an error...
please help
Click to expand...
Click to collapse
That's normal. Press volume up + volume down on that screen to access the stock recovery. You'll probably need to wipe data/factory reset in that menu to fix the boot error.
it might occured because I don't have enough battery?
phone just died because the lack of it :\
I'll try that later when I'll have abit of precentage on my battery
thanks! that did the trick for me
Rooting Defy+ with DFP -231
Does this method of rooting work with my Defy+ having Android 2.3.6 with build DFP-231 with BL7 ??
Can anyone please confirm. Thanx in advance.
harsh_voldy said:
Does this method of rooting work with my Defy+ having Android 2.3.6 with build DFP-231 with BL7 ??
Can anyone please confirm. Thanx in advance.
Click to expand...
Click to collapse
See here
Cant root defy plus 2.3.5
i tried rooting my phone defy plus running 2.3.5 with super one click but the process gets stuck at step6 in rooting the device.HELP! pls
abi129ful said:
i tried rooting my phone defy plus running 2.3.5 with super one click but the process gets stuck at step6 in rooting the device.HELP! pls
Click to expand...
Click to collapse
Try rebooting your device and try again
thanks, superoneclick is still the easiest for me.
Hi I want to flash a kernal netfilter for my defy or rom with netfilter kernel any help?
Sent from my MB525 using xda app-developers app
amarayoub83 said:
Hi I want to flash a kernal netfilter for my defy or rom with netfilter kernel any help?
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
Perhaps you are forgetting that our phone have a locked bootloader.
No but when I update from eclir to froyo via motorola the kernel was netfilter but when I flash cm7 kernel I missed this feature
Sent from my MB525 using xda app-developers app
Actually, there is nothing called CM7 kernel or CM9 kernel. It's just stock kernel extracted from various SBF version that works best with CM7 or CM9. Nothing can be done afaik.
andr0idfreak said:
Actually, there is nothing called CM7 kernel or CM9 kernel. It's just stock kernel extracted from various SBF version that works best with CM7 or CM9. Nothing can be done afaik.
Click to expand...
Click to collapse
Ok thx
I can't tether via wifi even in android 2.3 rom .you have an idea? because it important to me, I make my resesrch in internet and I found that (the kernel must be netfilter)?
Sent from my MB525 using xda app-developers app
Which ROM are you on? Wifi tethering works fine on all 2.3 ROMs, unless mentioned in the changelog/bugs section.
i was on creed 3.1
when i install creed 3.5 it stuck on boot screen
want stock kernal to update rom pls can anyone give me the link of stock kernal or
tell how to install creed 3.5
namit.garg92 said:
i was on creed 3.1
when i install creed 3.5 it stuck on boot screen
want stock kernal to update rom pls can anyone give me the link of stock kernal or
tell how to install creed 3.5
Click to expand...
Click to collapse
Visit this and follow the procedure
http://forum.xda-developers.com/showthread.php?t=1550065
[CUSTOM][KERNEL] MerrukTechnology Kernel 2.0 PRE-FINAL, For Samsung Galaxy Y GT-S5360
sir i have tried cwm but failed pls can u tell me procedure
Flash Kernel Via CWM by mai77(My Prefered Way
Download the following and place to the Root Of SD card
CWM
KernelUpdate.zip
Ext4
MerrukTechnology v2.0 Pre-Final(boot.img ONLY)
System 1.0.8
(Note : For system 1.0.8 it contains "system" folder, extract that folder and place in root of SD card)
Now we are all set
1. Turn off phone and boot into CWM
(Note: To boot into CWM press Vol Up, Home, and Power at the same time and in the stock recovery choose update from zip and select the CWM.zip)
2. Once in the CWM recovery, simply choose install from zip and select KernelUpdate.zip
(Note : Kernel Update.zip looks for a boot.img file in SD card and flashes it)
3. After successful kernel up press power to return to CWM
4. Press Reboot now, and your kernel is updated
5. Reboot twice and it will automatically delete the system folder in SD card
6. Repeat step 1 and select install from zip, this time choose the Ext4.zip
7. Press power to return to CWM and Press Reboot now
cache mount found error
sir i tried the above procedure now my phone shows the following message
What massage? Please write it down m8 coz i can't see any
Sent from my GT-S5360 using Tapatalk 2
install creed 3.5
cache files unable to mount
so i reverted to creed 3.1
thanks for ur immedate reply
so now can u tell me how to
install creed 3.5
I think first you should flash the stock firmware then flashing 3.5 may be completed
Sent from my GT-S5360 using Tapatalk 2
Anyway
First flash it with stock Rom
Then go to in built recovery mood
Then wipe and delete data
And then wipe cache
And then install the 3.5 version via the in built recovery mood.
Sent from my GT-S5360 using Tapatalk 2
But if the problem still present after doing all this thing please contact the developer
Sent from my GT-S5360 using Tapatalk 2
stock firmware link
can u provide me stock from link
http://forum.xda-developers.com/showthread.php?t=1465800
[Stock][ROM][Odin] Galaxy Y S5360 flashable firmware packages
Sent From My Samsung Galaxy Y Using Truth Of Darkness
Hit like if i helped
stock rom link
can u provide me stock rom flashable with cwm because last time while using odin i nearly bricked my phone
No buddy i can't
From my experience it can't be created.
I was just like you
But when i mistakenly bricked my phone i research for days searching thorough the net for unbricking it finally i found that article and take a deep breath and wow! It was solved.
So be brave and go ahead
You can also check out white cz's flashing if you have time.
Sent From My Samsung Galaxy Y Using Truth Of Darkness
But there's a chance
You can obtain an unmodified stock Rom back up file and then have it flashed directly via cwm
I wish i could but my internet package iS only 300 mb per month and i have 107 mb remaining.
:what::what::what::what::what:
Sent From My Samsung Galaxy Y Using Voice Of Darkness
(Real Helpers Don't Beg For Thanks)
Instructions and link
http://droidangel.blogspot.com/2011/12/odin-guide-on-how-to-flash-and-install.html
i have just flashed my phone with ultimate hd rom using rom manager app and now it wont work it stops at the sony logo and does nothing ,i couldnt boot to the recovery also ,does that mean i bricked the phone now or what :crying::crying::crying:
hishamoo said:
i have just flashed my phone with ultimate hd rom using rom manager app and now it wont work it stops at the sony logo and does nothing ,i couldnt boot to the recovery also ,does that mean i bricked the phone now or what :crying::crying::crying:
Click to expand...
Click to collapse
Did you flash the correct kernel? You can't expect it to boot after using ROM Manager without changing to the correct kernel.
僕のLT18iから送られてきた
hishamoo said:
i have just flashed my phone with ultimate hd rom using rom manager app
Click to expand...
Click to collapse
vashta said:
Step by Step Flashing a Custom Rom, from Stock /w auto rooting
For Arc (lt15i) // Unlocked BL
You can use this guide, on any custom rom.
I'm using Ultimate HD 3.0.2 when build this guide.
For who kinda new of using flashtool or installing / flashing and rooting a rom.
Preparation
. Copy your custom rom.zip to your sd card ( ex: UHD 3.0.2.zip )
. Copy your custom kernel wifi modules.zip to your sd card ( ex: modules.zip ) *you can get the modules, from the custom kernel thread you use
. I'm using Flashtool 0.9.9.0 *it's ok to use a newer version, haven't try it for older version though
. Download recommended base rom (ICS) => LT18i_4.1.B.0.587_(1254-2716).zip : dropbox // dev-host
*It's stock firmware of 4.1.B.0.587 for Arc S, i used it to increase system partition memory from 380mb to 420mb.
A. Back to official rom (unrooted).
========================
. Open flashtool, then click flash button (lighting icon). Choose Flashmode then ok.
. Select LT18i_4.1.B.0.587_(1254-2716) // wipe data , cache, apps log is checked // All exclude, unchecked // No final verification checked then click ok
. After a notification to plugin ur device pop up, connect ur phone (with power is off) while pressing the back key
(it's the left one, not the right one.. the picture on the flashtool is using different device).
. If ur doing right, the led phone will turn green and it will automatically flashing the phone
. After finish 100%, unplugged ur phone.
. Don't turn on the phone yet... let straight to step B
B. Install custom kernel
========================
. With phone still power off, connect ur phone to pc, but with holding the menu key now (the right one).
. If ur doing right, the led phone will turn blue and in the flashtool screen you will see that ur phone is in fastboot mode ( this is the mode u will often use if u wanna change different custom kernel).
. Click flash button (lighting icon). Choose fastboot then ok. A menu will pop up, choose 'Select kernel to Flash'
. Open ur desire custom kernel (file with this extension -> *.elf / *.img / *.sin ).
. It will automatically install after u choose to open it.
. Close it after finish
note :
. Choose kernel that have recovery mode on it. ex: CWM (Clockwork Mod) or TWRP. (Mostly user is familiar with CWM)
. In my case, i'm using Vengeance [ARC/S/PRO][1.32] kernel now. I choose Anzu, because my device is Arc. Also don't forget to download modules.zip, it's for wifi.
. There are many good kernel available for arc/s user like Lupus, Rush, Adv. Stock Kernel, etc, choose what suit for you
C. Install custom rom
========================
. Turn on ur phone now then keep pressing volume down to enter CWM.
. Standard operation before installing new rom :
- wipe data/factory reset
- wipe cache partition
- mount and storage -> format /system
- advanced -> wipe dalvik cache
- advanced -> wipe battery stats
. Now install zip from sdcard -> choose the UHD zip file, and follow the instruction in aroma. After finish don't reboot yet.
. Unchecked the reboot in aroma, after finish, u will be back in cwm.
. Now install the wifi modules first ( usually the custom kernel have their own wifi modules).
. reboot system.
. Finish
. Do the steps above, and u will not having bootloop.
. No need to thinking about rooting, Ur device is already root now because mostly cusrom and cus-kernel now is pre-rooted.
. Personally I usually never goes to step 1. Just because stuck on sony logo, i'm doing that just once
This is just for beginner who want to clean wipe, and face a hardtime because stuck / bootloop.
For me, just having stuck on sony logo, or other stuff, I'm just doing from step 3. Back again to cwm, and installed over...
Click to expand...
Click to collapse
XperienceD said:
Click to expand...
Click to collapse
i have the phone working again using step A,but when i try to install the custom kernel it says Failed:the device must be rooted first but i have already done that ,tried lupus and Ayame but wont work
hishamoo said:
i have the phone working again using step A,but when i try to install the custom kernel it says Failed:the device must be rooted first but i have already done that ,tried lupus and Ayame but wont work
Click to expand...
Click to collapse
Re-read the instructions, then once more while trying again.
hishamoo said:
i have just flashed my phone with ultimate hd rom using rom manager app and now it wont work it stops at the sony logo and does nothing ,i couldnt boot to the recovery also ,does that mean i bricked the phone now or what :crying::crying::crying:
Click to expand...
Click to collapse
use always CWM when flash rom
Need a hand
I bought a Note 2 in second hand. And the guy who sold it to me propably tricked me. It had Ditto Note 3 ROM installed and after a few hours of use it froze, got to the Samsung Logo and staye there for hours. The only solution was a battery pull.
It happens 2 or 3 times a day.
Read a lot of threads.... updated the firmware, the bootlader, the recovery, installed the latest version of Ditto ROM and the same stuff.
Now i'm in boot loop and can't get out of it.
Any solution? what can i do?
brunoavrocha said:
Need a hand
I bought a Note 2 in second hand. And the guy who sold it to me propably tricked me. It had Ditto Note 3 ROM installed and after a few hours of use it froze, got to the Samsung Logo and staye there for hours. The only solution was a battery pull.
It happens 2 or 3 times a day.
Read a lot of threads.... updated the firmware, the bootlader, the recovery, installed the latest version of Ditto ROM and the same stuff.
Now i'm in boot loop and can't get out of it.
Any solution? what can i do?
Click to expand...
Click to collapse
Do you want a Stock Rom or likin' current OS? If you want to keep current OS then try reset you phone in "Settings >> Backup & Reset"
And battery pulling out of phone is not the only option in situation like this, you can also press and hold power key for 4~8 secs it'd also restart the phone.
Note: Backup Internal Storage content before resetting.
m.b.jikre said:
Do you want a Stock Rom or likin' current OS? If you want to keep current OS then try reset you phone in "Settings >> Backup & Reset"
And battery pulling out of phone is not the only option in situation like this, you can also press and hold power key for 4~8 secs it'd also restart the phone.
Note: Backup Internal Storage content before resetting.
Click to expand...
Click to collapse
i just want to try to stop the freezes....
how can i install a stock rom?
brunoavrocha said:
i just want to try to stop the freezes....
how can i install a stock rom?
Click to expand...
Click to collapse
Download ur phone latest firmware from sammobile. (1.2+ gb)
Extract it anywhere u willl find an md5 file
download odin, install Samsung drivers on ur pc
Make sure u have battery more than 80%
Switch off ur phone
Remove battery
Open odin on pc..(disable any antivirus installed in ur PC before opening recomended to detect devices)
Click PDA tab and select md5 file u downloaded
Tick only on auto reboot and f. Reset time on odin.. Uncheck others
Re insert battery
Boot up ur phone into download mode(to do so hold vol. Down+menu+power) after screen light up press vol up to enter download mode)
Connect usbcable to both phone and pc
U will notice a colour change in a box of odin if ur device is detected
Click on start.. Then odin starts installing stock rom and ur device will reboot after process
Sent from my GT-N7100 using XDA Premium 4 mobile app
hazin99 said:
Download ur phone latest firmware from sammobile. (1.2+ gb)
Extract it anywhere u willl find an md5 file
download odin, install Samsung drivers on ur pc
Make sure u have battery more than 80%
Switch off ur phone
Remove battery
Open odin on pc..(disable any antivirus installed in ur PC before opening recomended to detect devices)
Click PDA tab and select md5 file u downloaded
Tick only on auto reboot and f. Reset time on odin.. Uncheck others
Re insert battery
Boot up ur phone into download mode(to do so hold vol. Down+menu+power) after screen light up press vol up to enter download mode)
Connect usbcable to both phone and pc
U will notice a colour change in a box of odin if ur device is detected
Click on start.. Then odin starts installing stock rom and ur device will reboot after process
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
sorry for another stupid question, i bought the in second hand and i don't know where it came from....
so how do i
Download ur phone latest firmware from sammobile ?
Do you know which model it is? If you go to settings about device and take a screen shot and upload it. We might be able to help a bit more and also make sure you flash the right firmware
Sent from my GT-N7105 using Tapatalk
brunoavrocha said:
sorry for another stupid question, i bought the in second hand and i don't know where it came from....
so how do i
Download ur phone latest firmware from sammobile ?
Click to expand...
Click to collapse
Download 4.3 latest rom for ur current region.. If ur phone is unlocked its not a problem at all... My phone is Officially UAE based but now I am using INDIAN version now for getting fast updates and my current region.
Sent from my GT-N7100 using XDA Premium 4 mobile app