Related
How to Unbrick Samsung Galaxy Gio
If your phone doesn’t boot into download mode and you have a black screen after flashing anything wrong. Here's how you unbrick it; worked for me
==Method 1:==
Prepare ODIN with the firmware you want to flash (in my case was Gingerbread 2.3.4) and get it ready to go.
-
Remove battery, wait for a bit. Insert battery again.
-
Flash a recovery with your specific filesystem (EXT4 or RFS)-(If you have EXT4, download ext4 only, don't get ext4+rfs)
-
Enter recovery & Wipe | Format:
System
Data
Cache
Dalvik Cache
Have ODIN ready. Connect phone to PC.
-
Reboot to Download Mode
Hold Volume down + Power + Home button at the same time.
-
At this point Odin should have detected your Galaxy Gio (Yellow rectangle should appear).
-
Insert the Stock Rom or Custom Rom.
-
Click Start button in Odin and wait about 5 min.
-
Reboot and wait
If all goes well it should come back to life.
If not, repeat the steps above ^ (Atleast 2x)
Download ODIN 4.42
Download OPS Only
Download DRIVER Only
==Method 2==
Here's a video using a USB Jig to Unbrick
nggabi said:
if u brick with rom manager you can use only jtag box.
Click to expand...
Click to collapse
www.jtagbox.com/
==Method 3==
You can try: One-Click UnBrick by AdamOutler
====================
Detailed procedure using ODIN HERE
==List of Stock Roms for GIO==
Password: samfirmware.com
OR
Password: sampro.pl
Recovery mode and the download does not turn on my phone is not charging will not load in this case is, this process recovers the phone with Kies was updating the brick?
thank you
Martin Riggs(Yunus) said:
Recovery mode and the download does not turn on my phone is not charging will not load in this case is, this process recovers the phone with Kies was updating the brick?
thank you
Click to expand...
Click to collapse
It was hard to understand but did you mean: "Recovery mode and download mode does not work on my phone. It's not charging in this case. Does this process unbrick the phone with kies?"
Still hard to understand what you mean, did you brick your phone when trying to install clockworkmod?
iok1 said:
It was hard to understand but did you mean: "Recovery mode and download mode does not work on my phone. It's not charging in this case. Does this process unbrick the phone with kies?"
Still hard to understand what you mean, did you brick your phone when trying to install clockworkmod?
Click to expand...
Click to collapse
No, I never turn on my phone. charge can not Kies program and installing the official 2.3.6 TUR after download article but the phone does not open
Martin Riggs(Yunus) said:
No, I never turn on my phone. charge can not Kies program and installing the official 2.3.6 TUR after download article but the phone does not open
Click to expand...
Click to collapse
Try this:
Take out battery and wait for a while. Then put it back in.
Now, again, take out battery and wait for a while. Then put it back in.
Now try Download mode
Peteragent5 said:
Try this:
Take out battery and wait for a while. Then put it back in.
Now, again, take out battery and wait for a while. Then put it back in.
Now try Download mode
Click to expand...
Click to collapse
Thank you!
but, how often the?
the exact solution?
No signs of life My Phone
Charge the phone using your charger
Sent over Electromagnetic Waves
This thread is useless without this info:
Howto brick a gio
1. Erase efs and bootloader partition
2. Have fun!
Sent from my hexacore rooted toaster with xdatoast premium
Peteragent5 said:
How to Unbrick Samsung Galaxy Gio
If your phone doesn’t boot into download mode and you have a black screen after flashing Froyo or GB here's how you unbrick it, it worked for me .
Step 1 – Prepare odin with the firmware u want to flash (in my case was gingerbread 2.3.4) and get it ready to go;
Step 2 – Remove battery, SIM and SD card, next connect your Galaxy Gio to the computer;
Step 3 – Hold Volume down + Power + Home button at the same time;
Step 4 – Insert the battery and wait a bit;
Step 5 – At this point Odin should have detected your SG Gio ( Yellow rectangle should appear);
Step 6 – Click Start button in Odin and wait about 5 min.
If all goes well it should come back to life.
If not, enter the Stock Recovery and Wipe Data and Cache, then repeat the steps above ^
For a detailed procedure using ODIN look HERE
List of Stock Roms for GIO
Grab this tool to flash the stock ROM:
ODIN Multi Downloader v4.42
OPS File: GIO_v1.0.ops
Driver: GIO_Driver
Or to Download Odin and Gio.ops only (No Driver Included) Download HERE
PS. The correct Asia Gingerbread firmware is this one:
S5660DXKT4
Password: samfirmware.com
OR
Password: sampro.pl
Click to expand...
Click to collapse
well mine its not thata bad , i did the flash with odin but it keeps restarting , start image then goes back to logo and so on , what can ido? thanks
jaibobro said:
well mine its not thata bad , i did the flash with odin but it keeps restarting , start image then goes back to logo and so on , what can ido? thanks
Click to expand...
Click to collapse
Go to recovery and wipe data/cache
Sent from my GT-S5660 using xda premium
I have done anything, but my phone has still a bootloop with every rom.
WietsedeVries said:
I have done anything, but my phone has still a bootloop with every rom.
Click to expand...
Click to collapse
That's good!
As in: your phone still has life!!
Does stock Rom work for you? Reflash it but you MUST wipe Data and Cache using the STOCK recovery before you reflash Stock!!
Remember to follow flashing instructions posted by the Dev!
Peteragent5 said:
That's good!
As in: your phone still has life!!
Does stock Rom work for you? Reflash it but you MUST wipe Data and Cache using the STOCK recovery before you reflash Stock!!
Remember to follow flashing instructions posted by the Dev!
Click to expand...
Click to collapse
I have stock now on it, but I haven't wiped Data and Cache with the stock recovery, because I use CWM. This afternoon I will try to do it with the stock recovery.
Now I have wiped everything with the stock recovery, and then I tried to install the stock rom. I still have the bootloop. I really don't understand it. It has to work...
//When I click on "test redbend fota[FS]" in the stock recovery I get this error:
-- Update from RB Fota
E:failed to mount /data (invalid argument)
E:install_fota:Can't unmount /data
Can't mount data partition ...
Installation aborted
Click to expand...
Click to collapse
any options if I can;t get into recovery, boot, and odin is stuck at downloading the first file in any .tar.md5 ?
kinda bricked my phone, odin doesn't do anything.
voetbalremco said:
any options if I can;t get into recovery, boot, and odin is stuck at downloading the first file in any .tar.md5 ?
kinda bricked my phone, odin doesn't do anything.
Click to expand...
Click to collapse
Is that tar.md5 stock rom?
lemmymet said:
Is that tar.md5 stock rom?
Click to expand...
Click to collapse
Fixed it, dont know how..
Sent from my GT-S5660 using xda premium
Take out the. md5 from the file
Fixed it already
Sent from my GT-S5660 using xda premium
I´m having the same problem. How did you solved it?
Thanx in advance
my galaxy w turn black and nothing work, its happened after im installing cwm. maybe because im too fast pull out usb wire. :crying: please help me. now im realize why am i doing this, after all im only 15teen. T.T help me.
bashrimuhaiedin said:
my galaxy w turn black and nothing work, its happened after im installing cwm. maybe because im too fast pull out usb wire. :crying: please help me. now im realize why am i doing this, after all im only 15teen. T.T help me.
Click to expand...
Click to collapse
your screen doesn't even turn on ?
can you post sompe picture of that?
if you can go to the download mode (VOL DOWN + HOME + POWER) flash the stock rom through odin
bashrimuhaiedin said:
my galaxy w turn black and nothing work, its happened after im installing cwm. maybe because im too fast pull out usb wire. :crying: please help me. now im realize why am i doing this, after all im only 15teen. T.T help me.
Click to expand...
Click to collapse
Hi, I had a similar problem a day ago, I corupted CWM and couldn't boot into android, When i started my phone a samsung logo appeared and then black screen, I could access download mode ( Power button, Volume - and home button ) So all you do after you enter download mode is download Odin multi downloader, and a flashable ClockworkMOD recovery, ( PM me if you want links ) and flash it into the phone, after that just reboot the phone and you will be just fine.
Press the Thanks button if i helped
Sent from my GT-I8150 using XDA-developers app
MayB4ck said:
Hi, I had a similar problem a day ago, I corupted CWM and couldn't boot into android, When i started my phone a samsung logo appeared and then black screen, I could access download mode ( Power button, Volume - and home button ) So all you do after you enter download mode is download Odin multi downloader, and a flashable ClockworkMOD recovery, ( PM me if you want links ) and flash it into the phone, after that just reboot the phone and you will be just fine.
Press the Thanks button if i helped
Sent from my GT-I8150 using XDA-developers app
Click to expand...
Click to collapse
I tried the above method, i got the attached screen. However, i can't start my phone till now. Please advise.
mohamed_fattoh said:
I tried the above method, i got the attached screen. However, i can't start my phone till now. Please advise.
Click to expand...
Click to collapse
Hey, it's seem your setting wrong, uncheck reset time.
hinfamous said:
Hey, it's seem your setting wrong, uncheck reset time.
Click to expand...
Click to collapse
I did this but, still not succeeded. Do you suggest to try to download the stock ROM instead of the CWM?
I'm trying to download the CWM not the stock ROM.
Thank you guys.
mohamed_fattoh said:
I did this but, still not succeeded. Do you suggest to try to download the stock ROM instead of the CWM?
I'm trying to download the CWM not the stock ROM.
Thank you guys.
Click to expand...
Click to collapse
Hey,
First put your phone into download mode and plug it in to your PC and make sure Odin recognizes it, then add Ancora.ops in the OPS window and the recovery.tar.md5 in the One package window. Also make sure that One package , Auto reboot and Protect OPS are checked, you should uncheck reset time because i've hear that it is causing some problems. Then just click the " Start " button and sit back, you phone will be back on in few minutes.
Just a question : Did you have any android installed when you corrupted the recovery? If yes, after you flashed the recovery the phone will reboot and will boot into android, if not then just flash the rom file if you already have one in your sdcard/internal storage.
Your phone is soft-bricked, don't worry, it will be back and running again :laugh:
I just corrupted my recovery on my phone on purpose to try if the cwm recovery works. And yes, it worked, so it should work on your phone too.
Good luck flashing your recovery, Please answer back because I want to know if this method worked.
Here are the files, just extract the rar file
Finally i have KitKat!!
Finally Solved!!!!!!!!!!!!!!!!!!!!!!!
After long days and hundred tries, it works finally. The story is as below:
1- I failed to download the CWM 6.0.4.5 directly in this state using ODIN,
2- I downloaded the stock (Yes old 2.3.6 ginger bread ROM) using ODIN. However this version keep rebooting and never completed the start up.
3- With ROM installed now (even it's not booting), i tried to download older version of CWM using ODIN (CWM 5.0.4). It was successful!!
4- I tried to do the restore for my old system, but it failed as i did backup with newer version.
5- I flashed Monster ROM (4.2.2), it works wonderful.
6- I downloaded the CWM 6.0.4.5 finally using ODIN.
7- Now i'm using 4.4.2 on my mobile finally.
Advice: Never do a flashing to your mobile when you are not fully concentrating what you are doing. Also, make sure to download the right tool and ROM for your device.
Thank you for everyone who tried to help me.
Muhammad
hello guys! Recently I installed a custom rom Cyanogenmod 10 for a while it worked normally but one month after normally use the battery has started to swell and i need to remove the battery, I bought another battery, put it on my galaxy w put when she did not want to load, bought a alternative loader and load the battery to 100% yet the galaxy w will not start normally, it will start to screen the ClockWorkMod and turn off again, can someone help me?
bladirangu said:
hello guys! Recently I installed a custom rom Cyanogenmod 10 for a while it worked normally but one month after normally use the battery has started to swell and i need to remove the battery, I bought another battery, put it on my galaxy w put when she did not want to load, bought a alternative loader and load the battery to 100% yet the galaxy w will not start normally, it will start to screen the ClockWorkMod and turn off again, can someone help me?
Click to expand...
Click to collapse
Did you format the /system folder in CWM upon installation?
Sent from my GT-I9195 using Tapatalk
arsradu said:
Did you format the /system folder in CWM upon installation?
Sent from my GT-I9195 using Tapatalk
Click to expand...
Click to collapse
No i only instal rom and it worked well for one month, thanks for helping me and sorry for bad english
bladirangu said:
No i only instal rom and it worked well for one month, thanks for helping me and sorry for bad english
Click to expand...
Click to collapse
Ok. As a note of advice for the future, don't just install ROMs one on top of the other. Do it clean, always, to avoid such problems.
For all ROM installations, please, follow the steps below:
First, make sure you got the ROM and the correct Gapps on your External SD Card.
After that, enter CWM and:
select "wipe data / factory reset"
go to "mounts & storage" and format /system. This is extremely important!
under the same menu, format /sdcard0 (be careful NOT to format /sdcard1, or /external_sd for older CWM versions, by mistake)
install the ROM (from the external sd)
install Gapps (from the external sd)
reboot your phone
Please, note that every step of this tutorial is mandatory!
Note: if you've got pictures/videos/documents, but NO application data (such as specific app files/settings), that you want to save, move them to a location on your External SD Card or a computer, because you're about to format the internal memory. If you want to move them back, you can do it after flashing the ROM.
Hope it helps.
arsradu said:
Ok. As a note of advice for the future, don't just install ROMs one on top of the other. Do it clean, always, to avoid such problems.
For all ROM installations, please, follow the steps below:
First, make sure you got the ROM and the correct Gapps on your External SD Card.
After that, enter CWM and:
select "wipe data / factory reset"
go to "mounts & storage" and format /system. This is extremely important!
under the same menu, format /sdcard0 (be careful NOT to format /sdcard1, or /external_sd for older CWM versions, by mistake)
install the ROM (from the external sd)
install Gapps (from the external sd)
reboot your phone
Please, note that every step of this tutorial is mandatory!
Note: if you've got pictures/videos/documents, but NO application data (such as specific app files/settings), that you want to save, move them to a location on your External SD Card or a computer, because you're about to format the internal memory. If you want to move them back, you can do it after flashing the ROM.
Hope it helps.
Click to expand...
Click to collapse
when I turn on the phone's screen CWM logo appears however the phone resets after that so I can not use CWM, I can not get into CWM
bladirangu said:
when I turn on the phone's screen CWM logo appears however the phone resets after that so I can not use CWM, I can not get into CWM
Click to expand...
Click to collapse
Is the new battery an original battery? And also, did you try to connect your phone to charger and enter CWM like this? Also, which CWM version did you install and where did you get it from (link to the thread maybe)?
arsradu said:
Is the new battery an original battery? And also, did you try to connect your phone to charger and enter CWM like this? Also, which CWM version did you install and where did you get it from?
Click to expand...
Click to collapse
yes the battery is original! yes i try to enter in CWM when charger is connect.
the version of CWM is clockwork-6.0.3.0 and i got this version in brazilian forum Called GSM fans
bladirangu said:
yes the battery is original! yes i try to enter in CWM when charger is connect.
the version of CWM is clockwork-6.0.3.0 and i got this version in brazilian forum Called GSM fans
Click to expand...
Click to collapse
Ok, please, try replacing your CWM recovery with this one here.
You can either use the tar.md5 file and flash it via ODIN (using a Windows PC) or, if you would have a working ROM, download the zip file, extract the recovery.img from it and flash it via Flashify (downloadable app from Google Play Store). Tell me if it makes any difference. The new CWM version should be 6.0.4.5.
business xinfflo
arsradu said:
Ok, please, try replacing your CWM recovery with this one here.
You can either use the tar.md5 file and flash it via ODIN (using a Windows PC) or, if you would have a working ROM, download the zip file, extract the recovery.img from it and flash it via Flashify (downloadable app from Google Play Store). Tell me if it makes any difference. The new CWM version should be 6.0.4.5.
Click to expand...
Click to collapse
I can not do this, I made a video you can take a look? sorry for the quality, as you can see, when I plug the usb he turn on and
CWM appears after that he turn off again
http://www.youtube.com/watch?v=9E7-NV8oKyU
bladirangu said:
I can not do this, I made a video you can take a look? sorry for the quality, as you can see, when I plug the usb he turn on and
CWM appears after that he turn off again
http://www.youtube.com/watch?v=9E7-NV8oKyU
Click to expand...
Click to collapse
Can you enter the DOWNLOAD mode (Turn off the phone --> then press Volume down + home + power at the same time) ?
LS.xD said:
Can you enter the DOWNLOAD mode (Turn off the phone --> then press Volume down + home + power at the same time) ?
Click to expand...
Click to collapse
Yes I can, only when i plug usb cable... I try a lot of times flash a new firmware on odin but when odin try to restart my phone it fails, the phone restarts but returns to the screen with a battery charging:crying:
bladirangu said:
Yes I can, only when i plug usb cable... I try a lot of times flash a new firmware on odin but when odin try to restart my phone it fails, the phone restarts but returns to the screen with a battery charging:crying:
Click to expand...
Click to collapse
Which Version of Odin are you using?
And just to be safe --> Have you tried a diefferent USB plug?
LS.xD said:
Which Version of Odin are you using?
Click to expand...
Click to collapse
4.43
bladirangu said:
4.43
Click to expand...
Click to collapse
I just tried it with my phone:
-Open Odin Multi
-select "Ancora.ops"
-mark "One package"
-select "recovery-clockwork-6.0.4.5-ancora.tar.md5" under "integrate package"
I tried to mark and unmark "auto reboot"
Flash process only succeeds if it autoreboots.
AND have you uninstalled samsung kies? You can manually close all kies instances and processes via task manager, but its more safe to uninstall it and only install samsung USB drivers.
This is how you did?
LS.xD said:
I just tried it with my phone:
-Open Odin Multi
-select "Ancora.ops"
-mark "One package"
-select "recovery-clockwork-6.0.4.5-ancora.tar.md5" under "integrate package"
I tried to mark and unmark "auto reboot"
Flash process only succeeds if it autoreboots.
AND have you uninstalled samsung kies? You can manually close all kies instances and processes via task manager, but its more safe to uninstall it and only install samsung USB drivers.
This is how you did?
Click to expand...
Click to collapse
i Try It again and now we have a litle change i don't know if they are good or bad news , my flash on odin run well but when odin try auto reboot the phone, the mobile screen starts flashing, as if trying to star,t and now the symbol of the CWM Disappeared
Can you still enter download mode?
If yes --> try flashing again and see if you can enter CWM pls (Volume up + Home + Power)
If no --> you can try flashing a full stock firmware via odin BUT you need the correct firmware package for your country (may be you know which firmware was installed as stock?)
bladirangu said:
I can not do this, I made a video you can take a look? sorry for the quality, as you can see, when I plug the usb he turn on and
CWM appears after that he turn off again
http://www.youtube.com/watch?v=9E7-NV8oKyU
Click to expand...
Click to collapse
Could you please, try another battery? I know you already changed it once. But just to be sure. Also, in the video, are you trying to start the phone after plugging the cable or does it automatically go into that recovery screen and then reboot?
LS.xD said:
Can you still enter download mode? If yes --> try flashing again and see if you can enter CWM pls (Volume up + Home + Power)
Click to expand...
Click to collapse
yes i enter in download mode and flash it again but i don't work , and no i can't enter in CWM and the screen keeps flashing when odin try to AutoReboot
EDIT-->
arsradu said:
Could you please, try another battery? I know you already changed it once. But just to be sure. Also, in the video, are you trying to start the phone after plugging the cable or does it automatically go into that recovery screen and then reboot?
Click to expand...
Click to collapse
ok i will buy another baterry , the phone only "start" if i plug the usb cable , if I try to turn on it without the cable connected the screen just start flashing
bladirangu said:
ok i will buy another baterry , the phone only "start" if i plug the usb cable , if I try to turn on it without the cable connected the screen just start flashing
Click to expand...
Click to collapse
Ok, please let me know what happens with the new battery. For as far as I can tell, this is not just a messed up ROM. But we'll see.
Sent from my GT-I9195 using Tapatalk
arsradu said:
Ok, please let me know what happens with the new battery. For as far as I can tell, this is not just a messed up ROM. But we'll see.
Sent from my GT-I9195 using Tapatalk
Click to expand...
Click to collapse
hello,and sorry about the delay in responding. Today I was in a shop the seller is asked to take the test with another battery, and the phone start and don't flash the screen, but as I tried to flash by odin yesterday, the android system can be corrupted, but the phone stay on, and don't flash more and stay in samsumg logo, i think u are right asradu! I have no money to buy it now, but I'll try to get back on topic as fast as possible to post news
I've been having some issues keeping my Tab Pro 8.4 rooted. It doesn't seem to want to stay rooted after rooting.
I installed CM13 on the device about a week ago and its been buggy as hell. I went to install CM13 updates and for that root had been lost again. When I try to reroot (using the guides provided) Odin3 works fine until the tablet tries to re-boot. At that point it gets stuck on the reboot screen and goes no further. I can't flash anything or get the device to get past that re-boot screen.
Any advice?
AustinTech said:
I've been having some issues keeping my Tab Pro 8.4 rooted. It doesn't seem to want to stay rooted after rooting.
I installed CM13 on the device about a week ago and its been buggy as hell. I went to install CM13 updates and for that root had been lost again. When I try to reroot (using the guides provided) Odin3 works fine until the tablet tries to re-boot. At that point it gets stuck on the reboot screen and goes no further. I can't flash anything or get the device to get past that re-boot screen.
Any advice?
Click to expand...
Click to collapse
if you are losing root by upgrading your rom, all you should have to do is flash supersu zip via custom recovery after your rom upgrade
try holding vol - and power till you see a glip in the screen at samsung splash and let go this should take you to your custom recovery.
if that doesn't work you will need
to fix your current issue, you will want to download your stock firmware, push via odin3 (let tab fully boot) then push your custom recovery via odin3.
if your custom recovery worked with vol - and power just start here
then flash your cm13 rom, gapps, then the supersu zip
@AustinTech
get it fixed?
also holding vol+ and power takes you to download mode for odin
toolhas4degrees said:
if you are losing root by upgrading your rom, all you should have to do is flash supersu zip via custom recovery after your rom upgrade
try holding vol - and power till you see a glip in the screen at samsung splash and let go this should take you to your custom recovery.
if that doesn't work you will need
to fix your current issue, you will want to download your stock firmware, push via odin3 (let tab fully boot) then push your custom recovery via odin3.
if your custom recovery worked with vol - and power just start here
then flash your cm13 rom, gapps, then the supersu zip
Click to expand...
Click to collapse
How do I push the stock firmware via odin3? I can get into download mode and then run odin3 but I'm not sure how to push firmware through the program. I'd also need to find the stock firmware.
Sorry if these are basic questions, but I'm not all that familiar with rooting. This is only my second device. And thanks for your help!
AustinTech said:
How do I push the stock firmware via odin3? I can get into download mode and then run odin3 but I'm not sure how to push firmware through the program. I'd also need to find the stock firmware.
Sorry if these are basic questions, but I'm not all that familiar with rooting. This is only my second device. And thanks for your help!
Click to expand...
Click to collapse
go to www.sammobile.com and go to firmware. then type in sm-T*** in the search bar(I believe your device is sm-t320). search then download your firmware based on your country. cellular south is US
open the zip with 7zip or winrar and extract the .tar.md5 file
after you download this go to download mode on your tab
then plug in via usb to pc make sure the com light turns green in odin
then run odin 3
click AP button
select the .tar.md5 file
wait for it to load
then press start and wait for about 20 min until your tablet reboots to the origonal setup
everything will be stock like when you bought it @ this point you will have to redo everything you did when you bought it to regain root and custom recovery
same issue
toolhas4degrees said:
after you download this go to download mode on your tab
then plug in via usb to pc make sure the com light turns green in odin
then run odin 3
click AP button
select the .tar.md5 file
wait for it to load
then press start and wait for about 20 min until your tablet reboots to the origonal setup
everything will be stock like when you bought it @ this point you will have to redo everything you did when you bought it to regain root and custom recovery
Click to expand...
Click to collapse
I'm having the same issue. I'm trying to return to stock, so I use odin, it says PASS but the tablet wont boot past the samsung logo.
protectnor said:
I'm having the same issue. I'm trying to return to stock, so I use odin, it says PASS but the tablet wont boot past the samsung logo.
Click to expand...
Click to collapse
do you have the right firmware for your region?ex the stock region your tab is from and last firmware ver your tab was on. and is auto reboot selected?
toolhas4degrees said:
do you have the right firmware for your region?ex the stock region your tab is from and last firmware ver your tab was on. and is auto reboot selected?
Click to expand...
Click to collapse
Wow I feel like an idiot. It didn't give me an option at first, it sent me to the Trinidad and Tobago link.
toolhas4degrees said:
do you have the right firmware for your region?ex the stock region your tab is from and last firmware ver your tab was on. and is auto reboot selected?
Click to expand...
Click to collapse
I downloaded and flashed the correct firmware, but it still is stuck at the boot screen.
protectnor said:
I downloaded and flashed the correct firmware, but it still is stuck at the boot screen.
Click to expand...
Click to collapse
try going to stock recovery by vol- or + and power and try wiping data and cache
toolhas4degrees said:
try going to stock recovery by vol- or + and power and try wiping data and cache
Click to expand...
Click to collapse
Yes that helped. Thanks!
toolhas4degrees said:
go to www.sammobile.com and go to firmware. then type in sm-T*** in the search bar(I believe your device is sm-t320). search then download your firmware based on your country. cellular south is US
open the zip with 7zip or winrar and extract the .tar.md5 file
after you download this go to download mode on your tab
then plug in via usb to pc make sure the com light turns green in odin
then run odin 3
click AP button
select the .tar.md5 file
wait for it to load
then press start and wait for about 20 min until your tablet reboots to the origonal setup
everything will be stock like when you bought it @ this point you will have to redo everything you did when you bought it to regain root and custom recovery
Click to expand...
Click to collapse
I've downloaded the firmware but what the hell is a .tar.md5 file? I don't see anything like that in my extracted files.
I also don't have a PA button on my odin3
protectnor said:
Wow I feel like an idiot. It didn't give me an option at first, it sent me to the Trinidad and Tobago link.
Click to expand...
Click to collapse
Where did you get you firmware? I tried sammobile.com but the download was took 12 hours and both times gave me corrupt files.
I went to a different site and downloaded what I thought was the correct firmware but since there is no .tar.md5 file in the extracted files I'm thinking no...
Alright, sammobile is downloading a bit faster now so maybe in 2 hours I'll have the correct firmware. I think the site I used earlier was crap.
I educated myself on what a .tar.md5 file is as well and I think I'll be set once I have the firmware.
AustinTech said:
Alright, sammobile is downloading a bit faster now so maybe in 2 hours I'll have the correct firmware. I think the site I used earlier was crap.
I educated myself on what a .tar.md5 file is as well and I think I'll be set once I have the firmware.
Click to expand...
Click to collapse
Yeah sammobile was pretty slow for me too. Just make sure you have your tab!et in download mode before you connect it to the computer.
if you still have problems with sammobile you can download the firmware from the samsung servers with the tool SamFirm
http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
also in regards to your first post, CM13 has built in root, you don't need to manually root it, if you are then that's why it's breaking to enable root in cm13 go to settings -> developer options - > root access (then select apps, adb) this setting will persist over all future flashes, to enable developer options go to Settings -> about tablet and tap the build number 5 or 6 times to enable the option.
toolhas4degrees said:
@AustinTech
get it fixed?
also holding vol+ and power takes you to download mode for odin
Click to expand...
Click to collapse
I got it fixed.
Thanks for your help. PM me your PPal address - I want to buy you a beer. Or a pizza. You might be 13 yrs old for all I know.
AustinTech said:
I got it fixed.
Thanks for your help. PM me your PPal address - I want to buy you a beer. Or a pizza. You might be 13 yrs old for all I know.
Click to expand...
Click to collapse
I'm 32 lol, no money needed, just hit the thanks button. glad all is well.
Hey Guys.
i've got 2 Questions :
my mobile got stuck at Samsung logo due to Full Storage my friends told me to Reset it via odin.
i want to so i downloaded its md5 from Original source and i tried 3 Versions of ODIN 3.04 , 3.07 and 3.11
all i've got odin fail after BcmBP.img
i've searched for that problem and all the solutions i've read is to change the file , use another USB Solt or usb for the mobile
i've tried them all
firstly i'm using laptop and i've tried all the 3 Solts the same problem
and i've downloaded another File still the same
i didn't have Kies to stop it from Task manager and i've stopped Antivirus.
Note : my mobile isn't rooted , it must be rooted to work with Odin ? (BTW it's the 2nd Question ) if it's how could i root it via Laptop ?
AhmedGexe said:
Hey Guys.
i've got 2 Questions :
my mobile got stuck at Samsung logo due to Full Storage my friends told me to Reset it via odin.
i want to so i downloaded its md5 from Original source and i tried 3 Versions of ODIN 3.04 , 3.07 and 3.11
all i've got odin fail after BcmBP.img
i've searched for that problem and all the solutions i've read is to change the file , use another USB Solt or usb for the mobile
i've tried them all
firstly i'm using laptop and i've tried all the 3 Solts the same problem
and i've downloaded another File still the same
i didn't have Kies to stop it from Task manager and i've stopped Antivirus.
Note : my mobile isn't rooted , it must be rooted to work with Odin ? (BTW it's the 2nd Question ) if it's how could i root it via Laptop ?
Click to expand...
Click to collapse
Bro it's not how u reset ur phone using Odin..try this-
Switch off ur phone or just take out battery for 5sec and put it back in ..
Now press power+home+volume up button at the same time..
If u press above buttons correctly , u will enter recovery mode there just scroll down using volume buttons and use power button to select factory reset and delete user data and cache.
Done reboot and u will be fine
Yeshas Prabhakar said:
Bro it's not how u reset ur phone using Odin..try this-
Switch off ur phone or just take out battery for 5sec and put it back in ..
Now press power+home+volume up button at the same time..
If u press above buttons correctly , u will enter recovery mode there just scroll down using volume buttons and use power button to select factory reset and delete user data and cache.
Done reboot and u will be fine
Click to expand...
Click to collapse
Thanks for your reply but now i think that my frimware system is down.
firstly it was stuck at samsung logo and it doesn't even open. showing that message Firmwave upgrade has encountered an issue please select recovery mode in Kies.
and i've downloaded recovery (CWM) for my phone and i tried to reset factory in it and reboot the device it shows Samsung GT-i9082 Duos and nothing happens.
CWM has an option that it could install something from SD Card.
that file which i use in Odin would it work if i installed it by this way ?
AhmedGexe said:
Thanks for your reply but now i think that my frimware system is down.
firstly it was stuck at samsung logo and it doesn't even open. showing that message Firmwave upgrade has encountered an issue please select recovery mode in Kies.
and i've downloaded recovery (CWM) for my phone and i tried to reset factory in it and reboot the device it shows Samsung GT-i9082 Duos and nothing happens.
CWM has an option that it could install something from SD Card.
that file which i use in Odin would it work if i installed it by this way ?
Click to expand...
Click to collapse
Did u try above button configuration ..?
Yeshas Prabhakar said:
Did u try above button configuration ..?
Click to expand...
Click to collapse
yeah nothing appears.
AhmedGexe said:
Thanks for your reply but now i think that my frimware system is down.
firstly it was stuck at samsung logo and it doesn't even open. showing that message Firmwave upgrade has encountered an issue please select recovery mode in Kies.
and i've downloaded recovery (CWM) for my phone and i tried to reset factory in it and reboot the device it shows Samsung GT-i9082 Duos and nothing happens.
CWM has an option that it could install something from SD Card.
that file which i use in Odin would it work if i installed it by this way ?
Click to expand...
Click to collapse
Try this it's the last thing I can help ,maybe this link can help..-
https://androidmtk.com/flash-samsung-stock-rom-using-odin
Or take your phone to nearest customer care service.. All the best.��