[Q] Recurring Logcat ERROR with FD24 (sfhub ODIN NoData) - Samsung Epic 4G Touch

Finally moved up from my ODIN oneclick EL29 install from sfhub to his FD24 one (NoData). No mods were made to EL29 at all from time of install, just program installations.
Overall, FD24 seems to work well except for:
- the weird scrolling style now
- no scrolling wallpaper (even static ones)
- and a Home button that feels SLIGHTLY more unresponsive than EL29's
When I opened up aLogcat to take a look if there were any messages popping up at all, I was surprised to see the line:
"E/ ( xxxx): URE: SkPaint in getMeasureCacheProc index: 2"
recurring every few seconds (normally in little bursts of 5-10 messages). At first I thought it had something to do with aLogcat itself, since the "xxxx" number at the time matched aLogcat's PID. However, I uninstalled and tried CatLog from the Market instead, and it's still showing the same behavior. Never saw this message before with EL29... just wondering if anyone else is seeing the same?
Thanks in advance.

I have been getting that on all the ICS leaks

rujelus22 said:
I have been getting that on all the ICS leaks
Click to expand...
Click to collapse
Okay, good to know it's not just me then. Probably won't bother with a Full Wipe restore if that's the only big thing I see.

tmeader said:
Okay, good to know it's not just me then. Probably won't bother with a Full Wipe restore if that's the only big thing I see.
Click to expand...
Click to collapse
I have the official Samsung/Sprint ICS (no custom ROM; not rooted) and I'm getting this error. quite annoying.

Why are you running such an old version. Ff18 is the newest build.
Sent from my Nexus 7 using xda app-developers app

Okay now I see you posted this months ago and someone just responded so it popped up again.
Sent from my Nexus 7 using xda app-developers app

GiantJay said:
Okay now I see you posted this months ago and someone just responded so it popped up again.
Click to expand...
Click to collapse
And still months later, Sprint *still* has this error ripping out every second or so on their stock ICS load making it really difficult to debug apps my team is developing. Any good updates that won't change my handset around too much? I've tried an AOKP JB build, looked for a CM build, and that's about it. The AOKP rom seem to "cost" too much (battery life cut in half, camera acts weird, radio reception seems horrible (I mean worse than Sprint usually does!). Suggestions - this is the D710 handset and it seems like other versions of the SGSII are better supported out there.

This is fixed in the official JB builds. Should be out pretty soon now, but GB08 works great already.
Sent from my SPH-D710 using Tapatalk 2

Necro thread...
Sent from my SPH-D710 using xda premium

Brand new user with one post...
Sent from my SPH-D710 using xda app-developers app

Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

Related

Reverted back to 4.0.2 from 4.0.4

Not sure how many others have done this, but I had enough of 4.0.4
The problems I saw were (mostly radio related):
The lock screen was very laggy when unlocking the phone (> 1 sec)
The signal would flat out die before it cut over to edge in my basement
I would often see that the connection would die during sleep (powering on the phone and see it suddenly perk up)
A few occasions where answering the phone turned my screen black and dropped the call
Radio issues where, after multiple changes between edge/3g/hspa, I would only pull 1mbps down on hspa. A reboot ticked it back up to 5mbps.
Far worse data speeds in my house. Upstairs I could get 2mbps on 4.0.2 with XXKK6, with 4.0.4 on XXLA2 I was getting 0.6mbps at best.
Mind you, I've both applied the update via Clockwork Mod, and when that was having trouble reflashed the entire phone with the Google factory image.
So, last night I reflashed the 4.0.2 factory image instead. My computer was nice enough to hard lock on me in the middle of it, so I had to apply it twice, but I'm back on 4.0.2 and things are good now. I put Clockwork Mod back on as well to prevent an OTA from loading.
EDIT: Wow, 4 1-start votes already? Who would have thought that saying I ran into problems with 4.0.4 was the equivalent of personally insulting people?
Sound like you need to run BAMF
Sent from my Galaxy Nexus using Tapatalk
Mine Nexus doesn't do that, must be some PEBKAC related problem.
Did you try a ugla4 or uglc2 radio and the smart reflex edit?
bow chicka wow wow.
I flashed from 4.0.2 yakjuxw to 4.0.4 yakju and i actually experience better radio reception, for the first time i get a low 3g reception in my house from time to time, before i only had a medium strong edge reception.
Sent from my Galaxy Nexus using xda premium
MS. said:
Mine Nexus doesn't do that, must be some PEBKAC related problem.
Click to expand...
Click to collapse
Thanks for the useless comment, because clearly I must be struggling with the fine motor function involved with sliding the lock screen slider to the right. Or, maybe it's the intricate knowledge involved with not changing any of the OS's radio settings and allowing it to try to manage itself.
bendirkss said:
Sound like you need to run BAMF
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Yeah, part of me is pondering other ROMs; haven't made up my mind yet.
@rbiter said:
Did you try a ugla4 or uglc2 radio and the smart reflex edit?
bow chicka wow wow.
Click to expand...
Click to collapse
I didn't because there were issues beyond radio problems, namely the sluggishness on unlocking it and the mysterious behavior that I saw answering calls a few times. I might get bored one weekend and try reflashing with one of those radios instead.
I've done the radio reflash song and dance before on 4.0.2 because of the bug that I both mentioned here and logged on Google:
http://forum.xda-developers.com/showthread.php?t=1488097
http://code.google.com/p/android/issues/detail?id=25316
Unfortunately, despite providing data, Google has totally ignored the issue. Ultimately I just decided to stick with XXKK6 and let it do its own switching.
Tjotte said:
I flashed from 4.0.2 yakjuxw to 4.0.4 yakju and i actually experience better radio reception, for the first time i get a low 3g reception in my house from time to time, before i only had a medium strong edge reception.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
My reception on calls has been fine, but the overall bugginess of the radio, particularly with data speeds, has been untenable.
So far my phone has been working much better with 4.0.2. Again, if I decide to flash 4.0.4 again and mess with the radio I'll update the thread.
How do you give a negative rating to a thread?
gabster21 said:
How do you give a negative rating to a thread?
Click to expand...
Click to collapse
View attachment 1005865
Wow, I'm amazed at the hate this is attracting. Thanks!
I would have preferred suggestions about the problems my phone was having with 4.0.4, but it sounds like the only suggestions people are interested in making at this point would be of a personal nature.
I ran stock instead of custom for a few weeks but I just missed the little things. (Battery percent in status bar, toggles). I say try bamf for a dew days
Sent from my Galaxy Nexus using Tapatalk
ChazzMichaelMichaels said:
Wow, I'm amazed at the hate this is attracting. Thanks!
I would have preferred suggestions about the problems my phone was having with 4.0.4, but it sounds like the only suggestions people are interested in making at this point would be of a personal nature.
Click to expand...
Click to collapse
Sorry people are like this on here. One thing you could always try is running 4.0.4 with 4.0.2 radios if you found better reception with them. There is a whole list of flash able radios
Sent from my Galaxy Nexus using xda premium
Its no wonder why most people feel this is the worst forum on xda. To be honest, its because of how people are in this thread and the hard time they give the op for no reason, that I can no longer stand coming here. I hope all of you so called experts brick your phones and leave here for good.
Sent from my Galaxy Nexus using xda premium
mark manning said:
Sorry people are like this on here. One thing you could always try is running 4.0.4 with 4.0.2 radios if you found better reception with them. There is a whole list of flash able radios
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Ah, I didn't know if that was a safe thing to do or not. My hunch was that running older radios on newer ROMs might be dangerous; sounds like I was mistaken though.
mark manning said:
Its no wonder why most people feel this is the worst forum on xda. To be honest, its because of how people are in this thread and the hard time they give the op for no reason, that I can no longer stand coming here. I hope all of you so called experts brick your phones and leave here for good.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Noooo! Come back! You're trying to help!
ChazzMichaelMichaels said:
Ah, I didn't know if that was a safe thing to do or not. My hunch was that running older radios on newer ROMs might be dangerous; sounds like I was mistaken though.
Click to expand...
Click to collapse
Radios are not linked to version #'s like in the past. The reason they are labeled that way now is because it just so happens to relate to their corresponding release timing.
Sent from my Galaxy Nexus using xda premium
I must say I've noticed no difference coming from AOKP 4.0.3 to 4.0.4.Just some anomalous battery drain in standby but I can't help but flash experimental kernels every other day so that's more than likely the culprit.
Thanks, but I meant an actual negative number
Sent from my Galaxy Nexus using xda premium
If you had these same issues with the factory image, then you need to be posting this on the AOSP forum @ Google.

"invalid beta key" with Revolutionary

Hey all- I just downgraded my firmware on my replacement phone so I can s-off and root. The downgrade went fine. When I run revolutionary and enter the beta key I keep getting "invalid beta key" I have triple checked the serial number and I have tried 0 instead of O, etc. I finally stopped after a couple dozen attempts. Can anyone suggest a fix here?
Thanks
marcmarshall said:
Hey all- I just downgraded my firmware on my replacement phone so I can s-off and root. The downgrade went fine. When I run revolutionary and enter the beat key I keep getting "invalid beta key" I have triple checked the serial number and I have tried 0 instead of O, etc. I finally stopped after a couple dozen attempts. Can anyone suggest a fix here?
Thanks
Click to expand...
Click to collapse
Copy and paste the beta key into Ms word or another program so you can change the font. You have to type it exactly as they have it and their font sucks for that.
Sent from my ICS Dinc2
Thanks. Good tip but that is what I did. I pasted it into a text editor and then manually typed the characters on the line below to verify they matched. I will go back today and try again. At this point all I have managed to do is downgrade my firmware and lose 2 months worth of configuration and tweaking.
Problem solved. Contacted Revolutionary team via their chat space. I did not know how to cut and paste in a windows cmd window. I was provided with this MS link http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/windows_dos_copy.mspx?mfr=true and that did the deed.
Now I can move onto flashing a ROM. I was told there is a good and stable ICS ROM for us so I will hunt that down now. Any suggestions will be welcome.
Thanks
Condemned souls is really stable along with Aero's CM9 build 07/12
Same with ukb for sense 4
Sent from my Incredible 2 using xda app-developers app
sjpritch25 said:
Condemned souls is really stable along with Aero's CM9 build 07/12
Same with ukb for sense 4
Sent from my Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
Thank you. I will check them out.
On second thought, I remember reading a press release a couple three months back from Verizon giving the devices OTA schedule for ICS. DINC 2 was listed for late July. Maybe I should just wait a bit for the devs to get their brains on it.
marcmarshall said:
Thank you. I will check them out.
On second thought, I remember reading a press release a couple three months back from Verizon giving the devices OTA schedule for ICS. DINC 2 was listed for late July. Maybe I should just wait a bit for the devs to get their brains on it.
Click to expand...
Click to collapse
I wouldn't wait, the developers here got ics running almost flawlessly, and jb is already being worked on. I have such a hard time staying on one rom b/c their all so good, I can bounce between condemned's, ukb, or cm9. I'd say flash away and whenever we do get the official ics updates, everyone will be on jelly bean or something newer
Sent from whatever rom is in the chamber
bsmitty83 said:
I wouldn't wait, the developers here got ics running almost flawlessly, and jb is already being worked on. I have such a hard time staying on one rom b/c their all so good, I can bounce between condemned's, ukb, or cm9. I'd say flash away and whenever we do get the official ics updates, everyone will be on jelly bean or something newer
Sent from whatever rom is in the chamber
Click to expand...
Click to collapse
Don't wait. Just jump right in! If you don't like what you find, there are plenty of GB roms that are rock solid.
If you go UKB, I recommend X. V is a bit laggy for me. Of course, your challenge is going to be reading through 800+ pages of posts!
Have fun chasing the dragon!
Sent from my vivow using xda app-developers app
bsmitty83 said:
I wouldn't wait, the developers here got ics running almost flawlessly, and jb is already being worked on. I have such a hard time staying on one rom b/c their all so good, I can bounce between condemned's, ukb, or cm9. I'd say flash away and whenever we do get the official ics updates, everyone will be on jelly bean or something newer
Sent from whatever rom is in the chamber
Click to expand...
Click to collapse
Okay, twist my arm. I will flash one. I absolutely loved the last ICS ROM I had on my dinc1. It was Abducted. Do you know if any are similiar to that?
Rushead said:
Don't wait. Just jump right in! If you don't like what you find, there are plenty of GB roms that are rock solid.
If you go UKB, I recommend X. V is a bit laggy for me. Of course, your challenge is going to be reading through 800+ pages of posts!
Have fun chasing the dragon!
Sent from my vivow using xda app-developers app
Click to expand...
Click to collapse
Thanks. I was looking at UKB yesterday and was wondering about V vs X.
Also, X is closer to full sense 4, whereas V is 4a.
Sent from my vivow using xda app-developers app
I can't get wifi tethering working on UKB. Tried 3 versions of wifi tether beta and barnacle. WIFI tether is a must have for me. Any other recommendations for a good ICS ROM?.I like to use Apex launcher and I like the folder and notification interface in ICS.
marcmarshall said:
I can't get wifi tethering working on UKB. Tried 3 versions of wifi tether beta and barnacle. WIFI tether is a must have for me. Any other recommendations for a good ICS ROM?.I like to use Apex launcher and I like the folder and notification interface in ICS.
Click to expand...
Click to collapse
Barnacle fails on first try, but should work flawlessly after that.
Kangdemnation is awesome.
You could also try aero's cm9 build.
If you're looking for sense, ukb is top. Unless you go back to gb.
Sent from my Incredible 2 using xda app-developers app
Rushead said:
Barnacle fails on first try, but should work flawlessly after that.
Kangdemnation is awesome.
You could also try aero's cm9 build.
If you're looking for sense, ukb is top. Unless you go back to gb.
Sent from my Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
I'm running UKB-X. Barnacle Just keeps failing for me. I have installed and uninstalled several times and started and restarted at least a dozen. When I first run it gives a failure notice and asks to install wpa supplicant. After that it runs but my tablet will not connect.
I use Apex launcher so I don't really need the Sense widgets anyway. I love the ICS folder and notification handling. I ran CM7 on my dinc1 for awhile and liked it a lot. I'm considering CM9, Kangemnation, or MIUI ICS next. I'm leaning toward Kangemnation on yours and another recommendation. Think I will flash it as soon as I run a nandroid now.
Thanks.
Let us know how it runs.
Rushead said:
Let us know how it runs.
Click to expand...
Click to collapse
I will. Thanks.
Rushead said:
Let us know how it runs.
Click to expand...
Click to collapse
Well the install with my newly installed 4EXT went without a hitch. I don't understand the Google backup. When I installed UKB it put back most of my apps. This time it only put back 2. It is generally inconsistent for me. I believe if you make sure your hardware ID is different you can disable the option to clear the backup and then clear the cached data on your SD card. Then if you reflash the rom and enable the restore it will start fresh and put back all or most of your apps. Anyway, since I have a Titanium backup it is better because I can selectively restore a batch with all the my user data (no system apps!)
The big thing for me was getting wifi tethering (using it to post this on my tablet now). I could not get it with UKB using any 3rd party apps. With Kangdemnation the resident hotspot app works fine.
I have tethering and the ICS sweetness. So far I am a happy camper!
Nice!
Sent from my Incredible 2 using xda app-developers app
Rushead said:
Nice!
Sent from my Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
I am really liking this ROM. It has all the features i like from other ROMs. My Quadrant score is very good also.
Thanks guys for steering me here.

CM10 Developer help

Hello,
I have a big request to ask the developer for the Nightly Official CM10 builds.
I have been running them ever since i got my S3 with only a few known issues. I love love love these builds and greatly appreciate everything that they are doing for us.
I have one small favor to ask them to include in the next nightly or near future build.
Ever since build 9/18, i have been getting a hot reboot. I have narrowed it down to the app, smart status bar. This app has worked perfectly on every other ROM or nightly of CM10. So i KNOW its not the app.
I have a logcat here
and i personally feel its this change that is causing this.. i may be wrong but i dont know since nobody is giving me support or even caring.
On that note, i have mentioned this in the CyanogenMod 10 nightly thread. And all i got was a bunch of people *****ing me out claiming that im the only one who uses this app and experiences this issue. And that the problem lies in the app. But when nightlys are released arent they suppose to fix issues and not cause new ones? and if it were the app causing the problem then the app would have caused a hot reboot on my stock rom, on my galaxy s 2 cm10 nightly, on my HD2 cm9 nightly. And on EVERY other ROM out there. Well it doesnt nor has it caused issues up until the 19th build.
I apologize for any attitude or disgust in my dictation but i was very offended by the rudeness and ignorance of the remarks i was receiving. So i apologize for any hostility in my dictation.
Thank you for your time in reading my thread. I hope something gets done to resolve this issue.
Why not post in the cm10 thread?
Sent from my SGH-T999
lazarat said:
Why not post in the cm10 thread?
Sent from my SGH-T999
Click to expand...
Click to collapse
Lol i did -.- read my post.
I would say send the logcat to the app developer and they should fix compatibility. Link them to the github change as well. Supporting all possible users should be a priority.
Cyanogenmod adds changes that make the most benefit for over all performance. If this broke their code it would be resolved but this breaks the apps code so the dev needs to correct it.
I have sent info like this to devs before and been obliged and had the issue fixed.
Sent from my SGH-T999 using xda premium
imheroldman said:
I would say send the logcat to the app developer and they should fix compatibility. Link them to the github change as well. Supporting all possible users should be a priority.
Cyanogenmod adds changes that make the most benefit for over all performance. If this broke their code it would be resolved but this breaks the apps code so the dev needs to correct it.
I have sent info like this to devs before and been obliged and had the issue fixed.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I've tried that never got a reply from the developer. I just don't see how it works on every other ROM but the 9/18 and up ROMs. So it can't be a app problem
Sent from my SGH-T999 using Tapatalk 2
elesbb said:
I've tried that never got a reply from the developer. I just don't see how it works on every other ROM but the 9/18 and up ROMs. So it can't be a app problem
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
If it isn't working with an AOSP based rom, it is an app problem. Apps are supposed to be built with AOSP in mind..
joshnichols189 said:
If it isn't working with an AOSP based rom, it is an app problem. Apps are supposed to be built with AOSP in mind..
Click to expand...
Click to collapse
Yes i know. But it WAS working before the 9/18 update.. thats why i dont think its an app issue. Now Camera ICS has never worked on CM10 for my S3, it doesnt cause a hot reboot it just freezes then force closes. Thats an app related issue. But smart status bar causes a hot reboot and if you look at the logcat you can notice something is not right with the overlay. Everything runs perfectly on 9/15 build. Smart status bar works and desnt cause a hot reboot. so how could it be the app when it was working before? I just dont understand that part.
elesbb said:
Yes i know. But it WAS working before the 9/18 update.. thats why i dont think its an app issue. Now Camera ICS has never worked on CM10 for my S3, it doesnt cause a hot reboot it just freezes then force closes. Thats an app related issue. But smart status bar causes a hot reboot and if you look at the logcat you can notice something is not right with the overlay. Everything runs perfectly on 9/15 build. Smart status bar works and desnt cause a hot reboot. so how could it be the app when it was working before? I just dont understand that part.
Click to expand...
Click to collapse
The next logical step would be to see if it works on stock 4.1 on a Galaxy Nexus. That was you can see if it was something added that is different than stock Jellybean.
Sent from my SGH-T999
joshnichols189 said:
The next logical step would be to see if it works on stock 4.1 on a Galaxy Nexus. That was you can see if it was something added that is different than stock Jellybean.
Sent from my SGH-T999
Click to expand...
Click to collapse
Thank you... just one problem... don't have a nexus :\ maybe I'll post in the forum over there to see if someone can test it. Thank you for your help!
Sent from my SGH-T999 using Tapatalk 2
elesbb said:
Thank you... just one problem... don't have a nexus :\ maybe I'll post in the forum over there to see if someone can test it. Thank you for your help!
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Yeah that might be your best bet. I was thinking since CM10 is attempting to put stock 4.1 on our phones, you can isolate it to see if it is in fact something extra that CM added or if it is something that would be an issue on stock 4.1 as well.
Sent from my SGH-T999
joshnichols189 said:
Yeah that might be your best bet. I was thinking since CM10 is attempting to put stock 4.1 on our phones, you can isolate it to see if it is in fact something extra that CM added or if it is something that would be an issue on stock 4.1 as well.
Sent from my SGH-T999
Click to expand...
Click to collapse
So i posted this thread over in the nexus forums and someone confirmed it working perfectly on AOKP JB. Dont think its stock but its progress
elesbb said:
So i posted this thread over in the nexus forums and someone confirmed it working perfectly on AOKP JB. Dont think its stock but its progress
Click to expand...
Click to collapse
Very true. Someone will respond eventually I hope. Good luck sir!
Sent from my SGH-T999
joshnichols189 said:
Very true. Someone will respond eventually I hope. Good luck sir!
Sent from my SGH-T999
Click to expand...
Click to collapse
I seriously hope it gets fixed! I love this app
thanks for all your help as well!
Sent from my SGH-T999 using Tapatalk 2

[Discussion] Official FI27

Thanks to rockypr for his idea to do this on FH23. List all the fixes, bugs, additions or whatever you want to discuss about the official FI27 release.
I will start.
Additions/Changes:
Bugs/Issues:
Some quotes from the community:
First!
It's running great so far with agat's source kernel.
Sent from my SPH-D710 using xda premium
I think the thread title should be changed. Its not a leak. Source was released and OTA was confirmed on sprint community site.
BluesRulez said:
I think the thread title should be changed. Its not a leak. Source was released and OTA was confirmed on sprint community site.
Click to expand...
Click to collapse
Great point. I just copy and pasted from my last one
^^ True. This is going to be the latest OTA.
Sent from my SPH-D710 using xda premium
I'm trying out a stock rooted deodexed build I made a little bit ago and it seems like the scrolling is a little bit different from FI25. Also, I haven't run stock in forever, so are these wifi icons the same as they've been for a while? :screwy:
And yes the recent apps "bug" is still there but can be fixed pretty easily.
Sent from my SPH-D710 using Tapatalk
Click here for custom mods for your E4GT
I don't know if you guys get this, but Sprint ID makes my phone crash.
Sent from my SPH-D710 using Tapatalk 2
cob11341 said:
I don't know if you guys get this, but Sprint ID makes my phone crash.
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Nope, working fine for me. What zip did you use? Check with other people using the same download as you.
Sent from my SPH-D710 using Tapatalk
Click here for custom mods for your E4GT
As far as differences go this build feels almost identical to FI25.
Can't wait for the LG Nexus. For the record I called that 2 months ago before the whole world. I feel special now
Sent from my SPH-D710 using xda premium
rwilco12 said:
As far as differences go this build feels almost identical to FI25.
Click to expand...
Click to collapse
That can be good or bad... What's the verdict so far? Is it worth leaving a stable and battery friendly rom for this?
crawrj said:
Thanks to rockypr for his idea to do this on FH23. List all the fixes, bugs, additions or whatever you want to discuss about the FI25 Leak.
I will start.
Additions/Changes:
1. Removed ability to choose between MTP or Mass Storage.
2. Removed the Back up and reset option under settings.
Bugs/Issues:
Some quotes from the community:
Click to expand...
Click to collapse
Can you change that FI25 to read FI27 on post 1 please?
Also, someone set me straight please because I thought #1 and #2 were changes already in FI25. Are we not creating a changelog for FI25 to FI27?
tdunham said:
Can you change that FI25 to read FI27 on post 1 please?
Also, someone set me straight please because I thought #1 and #2 were changes already in FI25. Are we not creating a changelog for FI25 to FI27?
Click to expand...
Click to collapse
Damn it. I always forget that part. And yes it is a change from FI25 to FI27. I fixed the OP. Thanks!
I'm running Re-Calked 0.2.1 FI25. Last night I flashed Agat's 0.6.0. No problems at that point. Early this morning I flashed the FI27 modem.
Checked my phone later and had the dreaded LOS. Flashed back to the FI25 modem and all is well. I'm going to need my phone for awhile so I'll have to stay on 25 until I can get some free time to try again. I've only seen this on my phone a couple of times, and the last time was probably last December.
Anyone else seeing this? I'm in a good signal area, and my wife's phone had a strong signal at the time.
Hopefully this is an isolated case.
One Clicks posted: http://goo.gl/2imCp
Well now that I have my sd card back from RMA and backed up, I'll be happily waiting for the rooted stock OC install
MrLint said:
Well now that I have my sd card back from RMA and backed up, I'll be happily waiting for the rooted stock OC install
Click to expand...
Click to collapse
Pssst... look one post above yours
garwynn said:
Pssst... look one post above yours
Click to expand...
Click to collapse
have you seen the first sprint JB build for our phone has been confirmed by sextape ?!?!?!
daniel4653 said:
have you seen the first sprint JB build for our phone has been confirmed by sextape ?!?!?!
Click to expand...
Click to collapse
Yup. Earlier than I expected but good news nonetheless.
cob11341 said:
I don't know if you guys get this, but Sprint ID makes my phone crash.
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
I had this problem for a while now. The only thing that fixed this was freezing the Sprint ID process using a free app freezing app like App Quarantine. After freezing the app, my phone behaved wonderfully.

Virgin Mobile US Jelly Bean official update, GB28.

Have any VM US users installed the official update from Kies for their "Samsung Galaxy II" (Epic 4G Touch) yet? Have you had any problems? Has anything improved? The two problems that I read about so far are:
- Google Now closing quickly. Seems there is a fix by clearing cache or reset.
- BT not stable for some audio devices.
How is your battery life, has it improved, I read one report on the Sprint device that it did.
Please let me know of your experience with the official VM Jelly Bean, id GB28 US update from Kies, good or bad, thanks.
xda-soar said:
Have any VM US users installed the official update from Kies for their "Samsung Galaxy II" (Epic 4G Touch) yet? Have you had any problems? Has anything improved? The two problems that I read about so far are:
- Google Now closing quickly. Seems there is a fix by clearing cache or reset.
- BT not stable for some audio devices.
How is your battery life, has it improved, I read one report on the Sprint device that it did.
Please let me know of your experience with the official VM Jelly Bean, id GB28 US update from Kies, good or bad, thanks.
Click to expand...
Click to collapse
Or you can install it rself to find out all the answers you seek.
Sent from my SPH-D710 using xda premium
graydiggy said:
Or you can install it rself to find out all the answers you seek.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I wanted to see if anyone is having any problems before installing it or had anything good to say about new features. I am not on root so I can't flash back to a prior version.
Answers like yours are not helpful.
xda-soar said:
I wanted to see if anyone is having any problems before installing it or had anything good to say about new features. I am not on root so I can't flash back to a prior version.
Answers like yours are not helpful.
Click to expand...
Click to collapse
You can always Odin back to whichever version you desire, rooted or not.
Sent from my Epic 4g Touch on PACman
Adreaver said:
You can always Odin back to whichever version you desire, rooted or not.
Sent from my Epic 4g Touch on PACman
Click to expand...
Click to collapse
It is a pain
I too am interested in reports
Then you are out of luck. If you don't want to take the time and do for yourself, no one will take the time to do for you.
Sent from my SPH-D710 using xda premium
rancur3p1c said:
It is a pain
I too am interested in reports
Click to expand...
Click to collapse
Um, using odin takes a minute or 2 at most plus the wait time for the install which is less than 10 minutes. What's really a pain is lazy people sitting around with their hand out like that dude on the interstate on ramp.
☆SoA: Son's of Android™☆
I like to break stuff!
rancur3p1c said:
It is a pain
I too am interested in reports
Click to expand...
Click to collapse
ditch the entitlement and you might get a bit farther in life.
Guys, I didn't mean to start a flame war, just wanted to get some opinions of people on VM US SPH-D710VMUB using the GB28 update. Thanks.
xda-soar said:
Guys, I didn't mean to start a flame war, just wanted to get some opinions of people on VM US SPH-D710VMUB using the GB28 update. Thanks.
Click to expand...
Click to collapse
You didn't start a flame war. It was far from it. Another user brought that on himself.
Now, you could install what you are asking about and be the first to officially report back on your fondings. That's what I meant with my first post. I hope there are no hard feelings.
Sent from my SPH-D710 using xda premium
graydiggy said:
Now, you could install what you are asking about and be the first to officially report back on your fondings. That's what I meant with my first post. I hope there are no hard feelings.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Similarly, i only meant to say that even if you are dissatisfied with the update, there are easy methods readily available to go back to the ROM you are on now.
You asking if anyone else has tried the ROM is fine. The other user complaining that it's too difficult flies in the face of everything that xda is about.
Sent from my Epic 4g Touch on PACman
Adreaver said:
Similarly, i only meant to say that even if you are dissatisfied with the update, there are easy methods readily available to go back to the ROM you are on now.
You asking if anyone else has tried the ROM is fine. The other user complaining that it's too difficult flies in the face of everything that xda is about.
Sent from my Epic 4g Touch on PACman
Click to expand...
Click to collapse
You responded to the wrong person. Your response should be directed at two people. One of them isn't me.
Sent from my SPH-D710 using xda premium
graydiggy said:
You responded to the wrong person. Your response should be directed at two people. One of them isn't me.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Oops. Quoted the wrong post.
Sent from my Epic 4g Touch on PACman
Could someone post a link to that rom. I would like to look at it.
Also does anyone know if Virgin Mobile has Visual voice mail build in, or are they still on the dial in / old indicator style of voice mail.
Thanks.:fingers-crossed:
wizardknight said:
Could someone post a link to that rom. I would like to look at it.
Also does anyone know if Virgin Mobile has Visual voice mail build in, or are they still on the dial in / old indicator style of voice mail.
Thanks.:fingers-crossed:
Click to expand...
Click to collapse
Hi wizard, this thread is about the official Samsung update via Kies. I am not sure about VM-specific ROMs as I am not rooted.
Currently on stock ICS, Virgin has visual voice mail but it only seems to work sometimes for me. I am not sure how it will work on JB or if it will even exist on the official JB. I am pretty sure some vendor-specific features like Sprint ID and Virgin Mobile ID are lost in the official JB release.
xda-soar said:
Hi wizard, this thread is about the official Samsung update via Kies. I am not sure about VM-specific ROMs as I am not rooted.
Currently on stock ICS, Virgin has visual voice mail but it only seems to work sometimes for me. I am not sure how it will work on JB or if it will even exist on the official JB. I am pretty sure some vendor-specific features like Sprint ID and Virgin Mobile ID are lost in the official JB release.
Click to expand...
Click to collapse
I guess I miss understood the thread. The title implied there was a E4gT with a Virgin Mobile GB28 based rom in existence.
I am looking for a phone.apk, that used the non-visual voice mail system, which is comparable with the E4GT. I was hopping I might be able to get it from this rom.
-EViL-KoNCEPTz- said:
Um, using odin takes a minute or 2 at most plus the wait time for the install which is less than 10 minutes. What's really a pain is lazy people sitting around with their hand out like that dude on the interstate on ramp.
☆SoA: Son's of Android™☆
I like to break stuff!
Click to expand...
Click to collapse
Only if you already know the procedure
rancur3p1c said:
Only if you already know the procedure
Click to expand...
Click to collapse
It maybe takes five minutes to read and find out exactly how to do it.
Sent from my SPH-D710 using xda premium
graydiggy said:
It maybe takes five minutes to read and find out exactly how to do it.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Definitely longer. Even for a stupid person.
rancur3p1c said:
Definitely longer. Even for a stupid person.
Click to expand...
Click to collapse
Are you unfamiliar with the One Clicks?
The name is accurate...One click.
If it takes you more than 5 minutes to read how to click a button once, you may want to stay on the stock rom.

Categories

Resources