Related
I'm on Caulk's 2.9. but, naturally I have the ICS itch. Reading up on install steps, I should be installing Rogue kernel/recovery -> CM9 -> Gapps. The question is though, if I'm following the steps in Rogue install, when I get to the steps to update profile and PRL, is it going to bork because I'm still on Caulk's rom?
Actually, it looks like the CM9 specific recovery download only includes the recovery. This should be fine.
Nix that, the recovery looks for a build prop version 4.0.3,0 so that's out. I tried flashing the ROM, but that too is giving me build prop prop issues. Fuuuu. Any ideas?
I'm on rogue 1.1.2 which I've flashed cm7 with
Sent from my SPH-D710 using xda premium
you need a stock recovery on your phone first to properly flash cm9
either download miui or cm7, reboot, then go to recovery and follow the directions on installing it
you can't install it properly with a custom recovery at this point, or, at least, no one has reported that they are able to
So Kernel > Rom > Gapps > Factory Reset (For calendar sync) > reboot all good?+
If I odin the kernel, its goes on PDA right?
Doncabezon said:
So Kernel > Rom > Gapps > Factory Reset (For calendar sync) > reboot all good?+
If I odin the kernel, its goes on PDA right?
Click to expand...
Click to collapse
Yes you should be good after those steps.
Sent from my SPH-D710 using xda premium
NOT true...
you flash the rom and gaps only FIRST..
make sure everything works, then add a custom kernel...
and, make sure you are on a stock cm type kernel when you flash it, like what you get from MIUI or cm7, or it won't work
wase4711 said:
NOT true...
you flash the rom and gaps only FIRST..
make sure everything works, then add a custom kernel...
and, make sure you are on a stock cm type kernel when you flash it, like what you get from MIUI or cm7, or it won't work
Click to expand...
Click to collapse
C9 3.1 doesn't give clockwork so odin. The kernel goes on pda like the roms right?
I don't use Odin, I have OSX at home, so I use heimdall, and I don't want to give you bad info on Odin..there are lots of posts here about that though, so it will be easy to confirm for you
But, the bottom line is, you need to come from CM7 or MIUI first, then flash cm9/gaaps, wipe data, reboot
once you are sure everything works properly, then you can odin the 1.2.1C kernel..
wase4711 said:
I don't use Odin, I have OSX at home, so I use heimdall, and I don't want to give you bad info on Odin..there are lots of posts here about that though, so it will be easy to confirm for you
But, the bottom line is, you need to come from CM7 or MIUI first, then flash cm9/gaaps, wipe data, reboot
once you are sure everything works properly, then you can odin the 1.2.1C kernel..
Click to expand...
Click to collapse
Thanks. I had CM9 installed but never flashed a new kernel on CM9 so I am being as careful as possible
i know you can do it easily in Odin, but I don't want to give you bad info..
its nice to have a custom recovery with cm9!
Been running Blend from Team Noc for a bit and having a lot of core crashes, as well as some issues with notifications, etc. So I installed Blend 6.0 this morning and still had problems so wanted to try something else while those issues get fixed.
I went into recovery and this is a new recov I have never seen. It simply shows the android, then the following;
Android System Recovery <3e>
I was going to wipe using Caulk's and install another ICS ROM, so went to apply update from external storage (since that was the only option that made sense). Went to the folder they were, selected the format all and it took me back to the android guy on his back with a triangle!
So I am kinda stuck with this ROM unless I can get cqm back on (I guess). There are just so many threads that are out there, some old, some new, the sg2 has 5 flavors it seems based on the carrier (I am on sprint) so from what I can tell, it's the 4G touch.
Thanks to all read/replies.
use odin, instructions here
http://forum.xda-developers.com/showthread.php?t=1609255
Just use mobile odin and select the tar file w/recovery. You tried to boot into recovery without a recovery installed which is why it looked funny.
Thanks guys. I followed the 1st post (as I didn't see the 2nd) and ran the step's using a windows machine. Odin saw the device, flashed it, all green, success, and restarted.
Followed up with the quick root/CWM app and worked like a charm. I am back to square one now, did install Venum Ice RC3.1.1 which looked pretty clean, but 1st thing I noticed was anything that uses the media card doesn't work (camera for example). You hit it, returns you to the app drawer.
So, with what's out there right now, what seems to be the most stable with the basic's, (phone, data, camera, etc.)
Thanks again, was well worth the wait to do it correctly!
I've been using CM9A3 as my everyday from. Solid as a rock. I have 0 issue.
Sent from my SPH-D710 using XDA
I'd say it was official if I did not know any better.
Sent from my SPH-D710 using XDA
I am also on Team Noc's The Goodness Version 6 without a custom recovery, and have a similar question. In that thread they were discussing using Odin to flash a kernel with CM, and they posted two kernals one that is the FD02 (ICS) and the other is EL29 (GB). I am currently on an ICS rom that works with the newly flashed FD02 kernal. However, my question is while on ICS can I odin to the GB recovery kernal so that I can flash a different GB rom? I am nervous to try because I have heard of people bricking going from ICS to GB, but if this works it would make my life easier as a flashaholic
Mastershake725 said:
I am also on Team Noc's The Goodness Version 6 without a custom recovery, and have a similar question. In that thread they were discussing using Odin to flash a kernel with CM, and they posted two kernals one that is the FD02 (ICS) and the other is EL29 (GB). I am currently on an ICS rom that works with the newly flashed FD02 kernal. However, my question is while on ICS can I odin to the GB recovery kernal so that I can flash a different GB rom? I am nervous to try because I have heard of people bricking going from ICS to GB, but if this works it would make my life easier as a flashaholic
Click to expand...
Click to collapse
Use Mobile Odin to flash EL26+cwm kernel( http://db.tt/0QJkleJR ), hold volume^+power to boot into cwm wipe data/factory reset, wipe cache, wipe dalvick, flash rom, flash gapps, and reboot. People brick from using a ICS recovery to go back from certain ROMs. EL26+cwm is always the safest choice to flash with.
Sent from my SPH-D710 using Tapatalk 2 Beta-5
Mastershake725 said:
I am also on Team Noc's The Goodness Version 6 without a custom recovery, and have a similar question. In that thread they were discussing using Odin to flash a kernel with CM, and they posted two kernals one that is the FD02 (ICS) and the other is EL29 (GB). I am currently on an ICS rom that works with the newly flashed FD02 kernal. However, my question is while on ICS can I odin to the GB recovery kernal so that I can flash a different GB rom? I am nervous to try because I have heard of people bricking going from ICS to GB, but if this works it would make my life easier as a flashaholic
Click to expand...
Click to collapse
Yes you can mobile odin the el26 repack with cwm (not the rogue one) I believe its still at the top of the Nocturnal Venum rom thread. Flash in cwm and as it boots hold down the volume and power buttons. It should boot into the blue cwm. Flash whatever you want. Or mobile odin the el26 repack cwm and as it reboots hold the same buttons down to boot into recovery and flash away. El29 doesnt have a cwm repack (its rogue and not what you need). Keep in mind that mobile odin WILL NOT flash modem so dont try it.
Edit: The post above says basically the same thing. DO NOT use el29 kernel. Just reminding you...
VeNuM said:
Yes you can mobile odin the el26 repack with cwm (not the rogue one) I believe its still at the top of the Nocturnal Venum rom thread. Flash in cwm and as it boots hold down the volume and power buttons. It should boot into the blue cwm. Flash whatever you want. Or mobile odin the el26 repack cwm and as it reboots hold the same buttons down to boot into recovery and flash away. El29 doesnt have a cwm repack (its rogue and not what you need). Keep in mind that mobile odin WILL NOT flash modem so dont try it.
Edit: The post above says basically the same thing. DO NOT use el29 kernel. Just reminding you...
Click to expand...
Click to collapse
Thanks for the quick response! Just a clarification, I do have the el26+CWM (el29 was a typo). Lets say I want to leave ICS for another rom, and a use mobile odin to go back to el26 and accidentally boot into my ICS sandwich rom. Is there any potential risk of bricking there? Also, what is the significance of flashing a modem? I already have an EL29 modem and I am happy with the current setup, do most roms/kernals have baked in modems? And if so should I avoid them when using odin?
Mastershake725 said:
Thanks for the quick response! Just a clarification, I do have the el26+CWM (el29 was a typo). Lets say I want to leave ICS for another rom, and a use mobile odin to go back to el26 and accidentally boot into my ICS sandwich rom. Is there any potential risk of bricking there? Also, what is the significance of flashing a modem? I already have an EL29 modem and I am happy with the current setup, do most roms/kernals have baked in modems? And if so should I avoid them when using odin?
Click to expand...
Click to collapse
You can't boot into a ICS ROM on el26 it is a GB kernel. Every ROM I have used has baked in kernel but no modem. Any modem for e4gt will work with any ROM. Kernels are GB and ICS specific.
Edit:el26+cwm is juts safer to flash ICS ROMs/kernels. When you flash a ROM it will replace the kernel. Just use mobile odin to flash back to el26+cwm to flash new ROMs/modems(wiping like usuall). If changing modem just flash el26+cwm, wipe cache/dalvik, flash modem of choice, and flash ICS kernel of choice. Reboot.
Sent using Tapatalk 2 Beta-5 on AOKP 32 ROM
killaphatboy said:
You can't boot into a ICS ROM on el26 it is a GB kernel. Every ROM I have used has baked in kernel but no modem. Any modem for e4gt will work with any ROM. Kernels are GB and ICS specific.
Edit:el26+cwm is juts safer to flash ICS ROMs/kernels. When you flash a ROM it will replace the kernel. Just use mobile odin to flash back to el26+cwm to flash new ROMs/modems(wiping like usuall). If changing modem just flash el26+cwm, wipe cache/dalvik, flash modem of choice, and flash ICS kernel of choice. Reboot.
Sent using Tapatalk 2 Beta-5 on AOKP 32 ROM
Click to expand...
Click to collapse
Thanks for the tips that makes a lot of sense! I am gaining confidence of going between ICS & GB. Now is it the same process for roms like AOKP, MIUI, and CM7/9? I have heard they also need specific recoveries to operate correctly.
Yes, el26cwm only and they only use aosp kernels. I believe T.C.P. has them on one of his threads.
Sent on Slim-n-Trim 1.9 using Tapatalk 2
Hi all, I'm new here (well, not to XDA) as I just purchased this phone 2 days ago. I love it so far. It's such and upgrade from my LG Optimus that I almost considered not rooting or flashing ROM's. Of course, I caved in last night.
Anyway, I have a couple questions regarding Odin and the process around flashing different kernels/modems, etc. Any help would be great. I successfully flashed Blue Kuban without issues as I'm familiar with CWM and all that great stuff.
1. Is there a good tutorial that I can use to do more research on Odin? I see there's a mobile version and a PC version, so I'm not sure which to use.
2. I see in some ROM's, the install instructions state to first flash a specific kernel with Odin. Is this to prevent bricks from flashing from ICS to ICS ROM's?
3. Hypothetically, if I wanted to switch from Blue Kuban to CM9 (or any other ICS ROM), couldn't I just restore my stock GB back up and then flash CM9 (or any other ICS ROM)? If not, what is the most user friendly method you use?
Thanks all, really glad I chose this phone, it looks like there's awesome development for it! Any help is greatly appreciated!
mjs2011 said:
Hi all, I'm new here (well, not to XDA) as I just purchased this phone 2 days ago. I love it so far. It's such and upgrade from my LG Optimus that I almost considered not rooting or flashing ROM's. Of course, I caved in last night.
Anyway, I have a couple questions regarding Odin and the process around flashing different kernels/modems, etc. Any help would be great. I successfully flashed Blue Kuban without issues as I'm familiar with CWM and all that great stuff.
1. Is there a good tutorial that I can use to do more research on Odin? I see there's a mobile version and a PC version, so I'm not sure which to use.
2. I see in some ROM's, the install instructions state to first flash a specific kernel with Odin. Is this to prevent bricks from flashing from ICS to ICS ROM's?
3. Hypothetically, if I wanted to switch from Blue Kuban to CM9 (or any other ICS ROM), couldn't I just restore my stock GB back up and then flash CM9 (or any other ICS ROM)? If not, what is the most user friendly method you use?
Thanks all, really glad I chose this phone, it looks like there's awesome development for it! Any help is greatly appreciated!
Click to expand...
Click to collapse
1. OK for Odin, you can try searching for a tutorial on qbkings YouTube channel. Basically all you need to know is that the PDA slot is for kernels and such where as phone slot is for modems. Only have auto reboot checked in top right settings. Mobile Odin works the same way. You can flash kernels from there and can save you time and when you're away from a computer. It currently has problems flashing modems however. There is a paid and lite version which you can find here in xda if you search a bit.
2. Yes this is to prevent bricking which has been happening when wiping data/factory rest in custom recoveries repackaged in ICS kernels. This is why its recommended to go back to el26 because this is the last true source (we don't have ICS source yet) we had.
Whenever changing roms, you must Odin/mobile Odin the el26 cwm kernel and do any rom flashing, restoring, backing up from there. So if you want to switch to CM9 from the ICS version of Blue Kuban I'm assuming, Odin el26 cwm kernel and flash cm9+gapps there.
Anymore questions let me know
Sent from my SPH-D710 using Tapatalk
Awesome, great info and I'll definitely pick up the mobile version. So it looks like I only need to flash the kernel, not actually flast a GB Rom?
The only other thing I'm wondering is if you recommend using the Rogue CWM Recovery. I have it installed right now. Are all ROMS compatible with this recovery?
Thanks again for your quick and helpful answer!
I personally use the rouge 1.4.1 kernel to do all my flashing. Rouge recovery is built from tweaking the cwm recovery. In essence, they are the same thing. Rouge has less "no's" and the menus are better organized, so I use it.
mjs2011 said:
Awesome, great info and I'll definitely pick up the mobile version. So it looks like I only need to flash the kernel, not actually flast a GB Rom?
The only other thing I'm wondering is if you recommend using the Rogue CWM Recovery. I have it installed right now. Are all ROMS compatible with this recovery?
Thanks again for your quick and helpful answer!
Click to expand...
Click to collapse
Yea all you need is the kernel. If you're on an ICS rom when you flash the el26 cwm kernel, it won't boot your phone but you can go into recovery still.
I really wouldn't recommend any custom recovery at this time for ICS. I mean it takes maybe an extra minute odining the el26 cwm kernel or so instead of directly booting into rogue recovery. From there you can flash mods, tweaks, etc and then just reflash a compatible ICS kernel. What do you really need rogue for? Not worth the risk IMO.
Sent from my SPH-D710 using Tapatalk
slick_rick said:
Yea all you need is the kernel. If you're on an ICS rom when you flash the el26 cwm kernel, it won't boot your phone but you can go into recovery still.
I really wouldn't recommend any custom recovery at this time for ICS. I mean it takes maybe an extra minute odining the el26 cwm kernel or so instead of directly booting into rogue recovery. From there you can flash mods, tweaks, etc and then just reflash a compatible ICS kernel. What do you really need rogue for? Not worth the risk IMO.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Interesting. I'll have to read up more regarding Odin. So I could literally open Odin and plug my phone in and then flash the el26 kernel and flash whatever ROM I want from Odin as well? Sorry, a little confused there. Just not sure how I'd flash a ROM without a custom recovery.
Thanks again, I'll also check out some tutorials. I'm guessing it will feel like 2nd nature in a week, just learning the new process.
The recovery is built into the kernel for this device. I use odin, flash the el29 rouge kernel v1.4.1, when the phone resets after the flash, boot into recover using volume up and power, wipe, flash, whatever you want, make sure you reinstall ics rom or kernel if you are on ics and reboot.
Ah, so if I flash the EL26 Kernel, will that overwrite my Rogue Recovery?
mjs2011 said:
Interesting. I'll have to read up more regarding Odin. So I could literally open Odin and plug my phone in and then flash the el26 kernel and flash whatever ROM I want from Odin as well? Sorry, a little confused there. Just not sure how I'd flash a ROM without a custom recovery.
Thanks again, I'll also check out some tutorials. I'm guessing it will feel like 2nd nature in a week, just learning the new process.
Click to expand...
Click to collapse
Well download whatever rom+mods/etc and put the files on your phone. Then just odin/mobile Odin the el26 cwm kernel and flash whatever you want from there, ICS or GB without no chance of a brick.
On our phone and I think most Samsung's for that matter, the recovery isnt separate from any other partition like with HTC. It must be packed into the kernel. So whenever you flash a rom, whatever recovery is packed in with that kernel included with the rom is what you're getting. Most devs are packing in stock Android recovery to cut down on bricks and instead recommend always flashing from el26 cwm kernel.
So yea that's what makes mobile Odin so great. Have el26 on your storage and you can switch roms very fast, easy, and safe.
Anymore questions just ask.
Edit: are you on GB or ICS Blue Kuban and what rogue also?
Sent from my SPH-D710 using Tapatalk
Thanks, really good info. I'm on Blue Kuban ICS right now with Rogue CWM 5.0.2.7. Looks like Odin will be a very easy way once I get comfortable with it.
So basically, I'll put the kernel zip in the PDA slot in Odin and let it do its thing, then my phone will auto reboot into the kernel's recovery where I can flash the ROM? Or do I flash the kernel in Odin, and also flash the ROM in Odin as well?
mjs2011 said:
Thanks, really good info. I'm on Blue Kuban ICS right now with Rogue CWM 5.0.2.7. Looks like Odin will be a very easy way once I get comfortable with it.
So basically, I'll put the kernel zip in the PDA slot in Odin and let it do its thing, then my phone will auto reboot into the kernel's recovery where I can flash the ROM? Or do I flash the kernel in Odin, and also flash the ROM in Odin as well?
Click to expand...
Click to collapse
Odin is just used to flash the safe el26 cwm kernel onto your phone. It will auto reboot and just hang at the Galaxy S II screen since the GB kernel can't boot an ICS rom so just power+volume up into it. Hold it for maybe up to 15 seconds but it'll come around. You then flash the rom in recovery from there. So put you rom files, etc on your phone before you Odin the kernel.
Sent from my SPH-D710 using Tapatalk
slick_rick said:
Odin is just used to flash the safe el26 cwm kernel onto your phone. It will auto reboot and just hang at the Galaxy S II screen since the GB kernel can't boot an ICS rom so just power+volume up into it. Hold it for maybe up to 15 seconds but it'll come around. You then flash the rom in recovery from there. So put you rom files, etc on your phone before you Odin the kernel.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
oh ok sweet. That sounds pretty easy, actually! LOL! One last question hopefully, do I need to extract the kernel zip or do I just place the zip in the PDA slot?
Thanks again for your help today. It really cleared a bunch of questions I had.
mjs2011 said:
oh ok sweet. That sounds pretty easy, actually! LOL! One last question hopefully, do I need to extract the kernel zip or do I just place the zip in the PDA slot?
Thanks again for your help today. It really cleared a bunch of questions I had.
Click to expand...
Click to collapse
Kernels flashed through PDA slot in Odin will be in either .tar or tar.md5 format, .zips are for cwm recovery only. You can find the el26 cwm kernel in the kernel repository sticky in dev section, its the first kernel listed. No problem, glad to help.
Sent from my SPH-D710 using Tapatalk
or u can use the 34gt auto
http://forum.xda-developers.com/showthread.php?t=1342728
Thanks again everyone. I successfully switched roms today with no issues.
Sent from my SPH-D710 using XDA
I just upgraded my E4GT Sprint from GB to ICS using the oneclick installer. I am trying to install the CODENAME rom from CWM but havng issues getting CWM installed. I used the the E4GT auto but FE16 isnt listed so i tried FE15 but it wont load into CWM. So i tried this link "http://forum.xda-developers.com/showthread.php?t=1390393" and flashed from ODIN and it goes into CWM but before it boots it says my phone is a gt-i9100 and has a ! on the bottom. It appears to boot though so i booted back into CWM and tried to flash the ZIP for CODENAME and the gapps file and it jsut gets stuck at the boot screen with the transformer logo. I cant get into CWM after that point and have to ODIN back to ICS. I am on ICS now and its working fine. Does anyone have any instructions on getting CWM installed and the codename rom from a fresh odin ICS install?
mazdaspeed6 said:
I just upgraded my E4GT Sprint from GB to ICS using the oneclick installer. I am trying to install the CODENAME rom from CWM but havng issues getting CWM installed. I used the the E4GT auto but FE16 isnt listed so i tried FE15 but it wont load into CWM. So i tried this link "http://forum.xda-developers.com/showthread.php?t=1390393" and flashed from ODIN and it goes into CWM but before it boots it says my phone is a gt-i9100 and has a ! on the bottom. It appears to boot though so i booted back into CWM and tried to flash the ZIP for CODENAME and the gapps file and it jsut gets stuck at the boot screen with the transformer logo. I cant get into CWM after that point and have to ODIN back to ICS. I am on ICS now and its working fine. Does anyone have any instructions on getting CWM installed and the codename rom from a fresh odin ICS install?
Click to expand...
Click to collapse
You really should read more before hopping around like that without checking. Real risk for a brick here.
-Flash EL26 stock CWM kernel via the PDA option in ODIN/Mobile ODIN
-When phone begins reboot, Hold Power + Volume up until boots into recovery.
-Wipe data/factory, cache and dalvik cache
-Flash ROM
-Flash Gapps
-Reboot
Those are the instructions right from the developer's thread. This is an AOSP rom and it sounds like you're trying to install TW kernels.
http://forum.xda-developers.com/showthread.php?t=1662295
This is the kernel repository. It links to each kernel where you can read further and find out if they are safe for flashing things.
Seems like you've done a bunch of stuff. But you really should do a whole bunch of reading first or you will brick your phone.
My suggestion would be to use sfhub's one-click http://forum.xda-developers.com/showthread.php?t=1705730 to get to a fully stock rooted device. Then use his autoroot package http://forum.xda-developers.com/showthread.php?t=1342728 to add CWM (the lates in the package is FF11+CWM Agat I believe) then you can add Agat's latest kernel with CWM http://forum.xda-developers.com/showthread.php?t=1721065
But I would be very careful when flashing ANY ROM; use the developers prefered method. Some recommend using EL26 CWM. Some a different recovery or procedure. Be especially careful with CM9 and AOKP builds to follow the directions there.
Good luck
So while i was waiting for a response i just went back to the stock GB using the one click install. I then used the autoroot package to install CWM and then restored my nandroid backup before i made in the very beginning. So my phone is back to a perfect state with GB and CWM installed. Can i just flash the ROM from CWM as is then? For some reason i thought it had to be "converted" to ICS and thats what started this whole mess. Things have changed since my old Evo
I just noticed that im running EL29 not 26...does that matter? When i try to flash that CMW EL26 stock root is when it gave me that gt-i9100 on boot and the ! at the bottom. Using the autoroot and choosing the EL29 Rogue is the only way i got it installed.
mazdaspeed6 said:
So while i was waiting for a response i just went back to the stock GB using the one click install. I then used the autoroot package to install CWM and then restored my nandroid backup before i made in the very beginning. So my phone is back to a perfect state with GB and CWM installed. Can i just flash the ROM from CWM as is then? For some reason i thought it had to be "converted" to ICS and thats what started this whole mess. Things have changed since my old Evo
I just noticed that im running EL29 not 26...does that matter? When i try to flash that CMW EL26 stock root is when it gave me that gt-i9100 on boot and the ! at the bottom. Using the autoroot and choosing the EL29 Rogue is the only way i got it installed.
Click to expand...
Click to collapse
My friend some good suggestions above your post. Give yourself a day or two and do some reading prior to flashing. This way you may not end up at Sprint making up stories about why your phone wont boot up.
Let me just echo what everybody else has said, you're gotta read more. A lot more! If you're one goal is to get CNA in your phone I would recommend reading all of the very first post on that thread. They give step by step instructions.
If you need CWM there are several options to get it on your phone. Both sfhub and I have put together several one-click and automated options to get it on your phone.
One thing that hasn't been suggested yet but I would strongly encourage you to do is to read the "How Not To Brick Your E4GT" thread. It's sticked in the General section.
Good luck!
Two more things.
1) If you're going to ask for help give it a few minutes before trying something new. It takes people a minute to reply. Sometimes waiting that extra minute or two is all you need to be saved from bricking.
2) Don't be afraid to hit your thanks button for everyone who has offered advice already. I got them once for you but it might not hurt to do it again.
I have been looking around for about an hour or two trying to find a solid tutorial on how to install a custom recovery to install new Roms. I flashed my phone onto Virgin Mobile on FH13. It seems to me that there is more than meets the eye to installing a recovery on this phone. I really don't want to mess anything up at all. Could anyone guide me the right way as to how I can get CWM on my phone? I appreciate any help you can give me. Thanks!
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
RainMotorsports said:
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
Click to expand...
Click to collapse
Also new to the e4gt, im currently rooted on fh13.
say i want to flash paranoidandroid, which kernel (which includes recovery?) would you recommend?
also this is either flashed from odin (pc) or can be done through mobile odin?
then once kernel is flashed, i can then reboot into recovery, wipe and flash rom/gapps?
sorry for all the questions, just want to make sure!
bongzilla said:
Also new to the e4gt, im currently rooted on fh13.
say i want to flash paranoidandroid, which kernel (which includes recovery?) would you recommend?
also this is either flashed from odin (pc) or can be done through mobile odin?
then once kernel is flashed, i can then reboot into recovery, wipe and flash rom/gapps?
sorry for all the questions, just want to make sure!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1953783
RainMotorsports said:
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
Click to expand...
Click to collapse
My phone already has root. Everything else is stock. 4.0.4, build FH13, with no custom recoveries.
I don't understand what you mean in your second paragraph with "repacked stock" or "custom tw kernel".
I am completely lost as to where I should be going. My plan is to install this rom: http://goo.im/devs/Shabbypenguin/E4GT-Nightlies
How would I go around to getting this on my phone?
Also, what about this rom: http://forum.xda-developers.com/showthread.php?t=1810315
I am not sure which rom runs the fastest and most efficient. There are so many kernels for so many things, I have absolutely no idea which kernel to flash and how to flash it.
EDIT: So I have done some more reading up and I THINK I can starting to understand some of it. I assume the steps are to:
1. Install Mobile Odin Lite on my phone.
2. Flash the EL26 kernel on Odin Lite. Link to kernel: http://forum.xda-developers.com/showthread.php?t=1662295 (first kernel on the page)
3. This part I am kinda lost. Not sure if that kernel installed a new recovery or not. I assume I just reboot and go into recovery.
4. Nandroid a backup of my ICS stock that is on now? Can I even go back to this stock backup after putting on a new Rom? Which kernel would I need to install backup of stock?
5. Wipe data, dalvic, and install new Rom using instruction it came with. My problem is I want to run this Rom: http://goo.im/devs/Shabbypenguin/E4GT-Nightlies and it has no instructions. I assume you just wipe data and dalvic?
6. flash Rom, then flash Gapp? It doesn't have a link for any of the Gapps, so either I have to find a link to download Gapp or that rom already comes with it? Not sure.
7. Reboot into new Rom? Not sure if I missed a step or not.
Another question I have is with the kernels. Can I just leave it on the EL26 kernel for daily use of the phone? Say I want to install maybe cm10 next, do I just keep it on EL26?
Sorry for the spam of questions. I like to be 100% certain.
Best bet if your trying to install CM9 is to go to the EL26 CWM kernel as all of the AOSP rom instructions dictate. Using the EL26 kernel means your phone will only boot to Download and Recovery as it will only boot gingerbread roms.
Download the nightly you want to the device and then flash the EL26 CWM kernel in Mobile ODIN. After its all over with you might need to battery pull if you messed up booting into recovery and then boot into recovery (power + vol up). Install the rom. Install gapps. Wipe cache/dalvik but as I will recommend below you should just backup everything and a full wipe.
You can nandroid if you want but it will be making a copy of the ICS rom you have with the EL26 kernel on it so it is literally a restore to the point your starting from not where you were just before that. Its still a good idea if your afraid of losing things. I would use Super Backup from the market to backup your Contacts, Call Logs and MMS. Wipe cache and dalvik and all that. But realisticly you should backup your apps and data if you have Titanium Backup and start fresh just factory reset after your on CM9. Restore your apps with data (no system data) after that. A clean install will present the least of issues, even the Samsung updates from one rom to another are not without issues.
You can not boot anything but gingerbread with EL26 and once you install a rom you will be on the kernel with that rom. So you will have a Linux 3 android kernel with cwm 6 if you go with a CM9 nightly. From there you can flash the next nightly or the next beta etc. Older stuff will not flash from your new setup as AOSP roms have switched to a new device name in the build.prop.
As far as gapps here it is - http://goo.im/gapps/gapps-ics-20120429-signed.zip and don't forget to put this on the device ahead of time or you will have to mount usb and transfer using the pc in recovery.
RainMotorsports said:
Best bet if your trying to install CM9 is to go to the EL26 CWM kernel as all of the AOSP rom instructions dictate. Using the EL26 kernel means your phone will only boot to Download and Recovery as it will only boot gingerbread roms.
Download the nightly you want to the device and then flash the EL26 CWM kernel in Mobile ODIN. After its all over with you might need to battery pull if you messed up booting into recovery and then boot into recovery (power + vol up). Install the rom. Install gapps. Wipe cache/dalvik but as I will recommend below you should just backup everything and a full wipe.
You can nandroid if you want but it will be making a copy of the ICS rom you have with the EL26 kernel on it so it is literally a restore to the point your starting from not where you were just before that. Its still a good idea if your afraid of losing things. I would use Super Backup from the market to backup your Contacts, Call Logs and MMS. Wipe cache and dalvik and all that. But realisticly you should backup your apps and data if you have Titanium Backup and start fresh just factory reset after your on CM9. Restore your apps with data (no system data) after that. A clean install will present the least of issues, even the Samsung updates from one rom to another are not without issues.
You can not boot anything but gingerbread with EL26 and once you install a rom you will be on the kernel with that rom. So you will have a Linux 3 android kernel with cwm 6 if you go with a CM9 nightly. From there you can flash the next nightly or the next beta etc. Older stuff will not flash from your new setup as AOSP roms have switched to a new device name in the build.prop.
As far as gapps here it is - http://goo.im/gapps/gapps-ics-20120429-signed.zip and don't forget to put this on the device ahead of time or you will have to mount usb and transfer using the pc in recovery.
Click to expand...
Click to collapse
Ah, I read it twice and now it makes more sense. I have a pretty good idea of what to do now.
Put rom and gapp on phone, install EL26, backup, full wipe, flash rom and gapp, rom will install new kernel for me, then just reboot.
Last question, I just want to make sure. What exactly is a full wipe on this phone. I have done plenty of full wipes on the evo 4g. I am just asking because I hear some people have problems when they do a full wipe.
I really appreciate your help. Thank you!
Sorry if I jumbled everything together in my post by the I was running out the door. But this Hurricanne has stopped that and I regret not taking my time.
Well what I mean is a factory reset which formats /Cache and /Data. When you install the rom its going to format /System prior to writing the new firmware/rom. /Data has all your user apps, their data and your information etc. This does not wipe the Internal SD or the External SD though at times a line saying it was does come up in CWM.
Just don't do a Factory reset on the stock kernel you are on now, its fine on EL26 its fine on the kernels that come with the CM9 nightlies. Super Backup apparently does app's now too. I have never used it since I have Titanium Backup Pro but figured its also worth mentioning.
A note on turning back. As I said before if you flash the EL26 CWM kernel you wont be able to boot the ICS rom installed on the phone. At that point to go back instead of forward you can flash the FH13 kernel in desktop ODIN or the zip in CWM and you will have the FH13 kernel instead of EL26 and be back where you were. But once you flash the EL26 CWM kernel your goal at that point is flashing your rom of choice in CWM and not things like booting the phone.
You should be "okay" coming from a dirty install just wiping cache. But you may never know if a problem your having is the rom or some left over data unless you go clean and factory reset. Its a choice and its also a choice you can make later as you can always reset later. I would back up anything important first before doing any of this. Not so much a worry about bricking, as just about any normal situation will be recoverable, but more so to the point of if you have to wipe the phone and start from scratch.
RainMotorsports said:
Sorry if I jumbled everything together in my post by the I was running out the door. But this Hurricanne has stopped that and I regret not taking my time.
Well what I mean is a factory reset which formats /Cache and /Data. When you install the rom its going to format /System prior to writing the new firmware/rom. /Data has all your user apps, their data and your information etc. This does not wipe the Internal SD or the External SD though at times a line saying it was does come up in CWM.
Just don't do a Factory reset on the stock kernel you are on now, its fine on EL26 its fine on the kernels that come with the CM9 nightlies. Super Backup apparently does app's now too. I have never used it since I have Titanium Backup Pro but figured its also worth mentioning.
A note on turning back. As I said before if you flash the EL26 CWM kernel you wont be able to boot the ICS rom installed on the phone. At that point to go back instead of forward you can flash the FH13 kernel in desktop ODIN or the zip in CWM and you will have the FH13 kernel instead of EL26 and be back where you were. But once you flash the EL26 CWM kernel your goal at that point is flashing your rom of choice in CWM and not things like booting the phone.
You should be "okay" coming from a dirty install just wiping cache. But you may never know if a problem your having is the rom or some left over data unless you go clean and factory reset. Its a choice and its also a choice you can make later as you can always reset later. I would back up anything important first before doing any of this. Not so much a worry about bricking, as just about any normal situation will be recoverable, but more so to the point of if you have to wipe the phone and start from scratch.
Click to expand...
Click to collapse
That clarified a lot, thanks.
So I did it all. I did a factory reset from the new kernel. did dalvic also. I installed the new rom and gapp. Problem is that once I reboot, it shows the Galaxy SII screen, then goes into a black screen. I can't turn it back on again, so I remove the battery and it can restart. Does the same thing though. I followed your instruction and http://e4gtcm.blogspot.com/p/cm9-install-guide.html
What did I do wrong? I am worried I messed up my phone completely.
EDIT: So I went back into recovery and it was now a new version of CWM. I did everything over again; factory reset, cache, dalvic, and it is doing the same thing. Boots up "Galaxy SII" screen, then a black screen. It seems to still be on in the black screen seeing that it doesn't "turn" on again. I can hold if for 15 second or so for it to reset and does the same thing. Why is there a black screen?
Sorry for not checking back. Your probably freaking right now lol but relax your at a good point everything is fine.
Either a bad download or the nightly you went with happens to be a baddy. I am still on 10/20 I was gonna flash 10/28 today but the weather is screwing with me. goo.im seems pretty slow today.
Download another, battery pull and hold vol up + power until it hits recovery then go into mounts and mount usb storage hook a usb cable to the pc and copy over another build. I would say try 10/20 just because it works pretty good but that won't stop another bad download in which case you have to try try again.
Worst case from here we can just odin you back to stock rooted FH13 or your choice of other. Your phone is fine from what you have told me so far. I can upload one of the builds I have if you think ti would help any.
RainMotorsports said:
Sorry for not checking back. Your probably freaking right now lol but relax your at a good point everything is fine.
Either a bad download or the nightly you went with happens to be a baddy. I am still on 10/20 I was gonna flash 10/28 today but the weather is screwing with me.
Download another, battery pull and hold vol up + power until it hits recovery then go into mounts and mount usb storage hook a usb cable to the pc and copy over another build. I would say try 10/20 just because it works pretty good but that won't stop another bad download in which case you have to try try again.
Worst case from here we can just odin you back to stock rooted FH13 or your choice of other. Your phone is fine from what you have told me so far.
Click to expand...
Click to collapse
Phew! I was pretty positive that I could still get back to something working, just my paranoid self was getting tense. I got 10/28. I guess I will do 10/20. Do you know what the other updates have? I would hate to install something that isn't working its most efficient.
Again, thank you so much. You were of great help! Good luck with the weather issue. Hope you're safe!
I stopped following chris's experimentals so i am not sure what the most recent focuses have been. The Nightlies have whatever code was commited. They are built automatically and can range from very stable to not booting at all. I dont have any of the links on me but someone can get it to you. Reading commits is not exactly 100% user friendly especially if your not a developer. But they often have clues. I would follow the CM9 Beta thread and the CM9 User Support Threads - http://forum.xda-developers.com/showthread.php?t=1874374 and http://forum.xda-developers.com/showthread.php?t=1720771
I used to DL nightlies from work over 3g or 4g all the time and would get a bad dl and end up in situations where even my experienced self felt like I couldn't fix it till I got home and always got the phone running within an hour without the assistance of a near by pc.
I am uploading 10/20 to my server just in case its in Chicago so if your away from the weather it should be unaffected for the most part. Glad its not in NY anymore.
EDIT - http://android.rainmotorsports.net/10-20-CM9-d710-KANG.zip the md5 hash as I have it is 66246125ACDBEF2EBF2144E0CBFEBB7B and it matches the md5 listed on goo.im
RainMotorsports said:
I stopped following chris's experimentals so i am not sure what the most recent focuses have been. The Nightlies have whatever code was commited. They are built automatically and can range from very stable to not booting at all. I dont have any of the links on me but someone can get it to you. Reading commits is not exactly 100% user friendly especially if your not a developer. But they often have clues. I would follow the CM9 Beta thread and the CM9 User Support Threads - http://forum.xda-developers.com/showthread.php?t=1874374 and http://forum.xda-developers.com/showthread.php?t=1720771
I used to DL nightlies from work over 3g or 4g all the time and would get a bad dl and end up in situations where even my experienced self felt like I couldn't fix it till I got home and always got the phone running within an hour without the assistance of a near by pc.
I am uploading 10/20 to my server just in case its in Chicago so if your away from the weather it should be unaffected for the most part. Glad its not in NY anymore.
EDIT - http://android.rainmotorsports.net/10-20-CM9-d710-KANG.zip the md5 hash as I have it is 66246125ACDBEF2EBF2144E0CBFEBB7B and it matches the md5 listed on goo.im
Click to expand...
Click to collapse
I just got it downloaded. It is now up and running perfectly. I appreciate all your help man, thanks a bunch. I live in Washington state. So the weather wont affect me.
Good evening all. I hope this is the right forum to post my question about recovery for my e4g touch. I recently rooted my phone and my phone is currently on the fi27 build. Is there a recovery i can put on there now to go ahead and start flashing ruins, or will i have to wait for qbkng77 to post his video on you tube on putting cwm recovery on fi27 rooted e4g touch? Thanks in advance for the help!
Sent from my SPH-D710 using xda app-developers app
n1stunna84 said:
Good evening all. I hope this is the right forum to post my question about recovery for my e4g touch. I recently rooted my phone and my phone is currently on the fi27 build. Is there a recovery i can put on there now to go ahead and start flashing ruins, or will i have to wait for qbkng77 to post his video on you tube on putting cwm recovery on fi27 rooted e4g touch? Thanks in advance for the help!
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I assume you do the same thing as I did. Get the EL26 kernel and flash it with Mobile Odin. I would wait on someone else to confirm that though.
Another really quick question. I want to overclock my phone. I tried using setcpu and the overclocker it came with. It only goes to a max of 1200 but I know it can go higher. I am guessing I need another kernel. What kernel can I use?
joshlete said:
Another really quick question. I want to overclock my phone. I tried using setcpu and the overclocker it came with. It only goes to a max of 1200 but I know it can go higher. I am guessing I need another kernel. What kernel can I use?
Click to expand...
Click to collapse
You either need a kernel with built in over clock support(you'd see the CPU slider go up to 1400-1600 automatically if it was). Or a kernel that supports over locking in tegrak, which you "load over clock module" with in tegrak.
Both Kuban kernel and some of Agats kernels have built in support, mine you need to use tegrak as I have not added built in yet
You can get them all in rwilco's (awesome) kernel repository stickied in development
Sent from my SPH-D710 using xda premium