I'm on Caulk's 2.9. but, naturally I have the ICS itch. Reading up on install steps, I should be installing Rogue kernel/recovery -> CM9 -> Gapps. The question is though, if I'm following the steps in Rogue install, when I get to the steps to update profile and PRL, is it going to bork because I'm still on Caulk's rom?
Actually, it looks like the CM9 specific recovery download only includes the recovery. This should be fine.
Nix that, the recovery looks for a build prop version 4.0.3,0 so that's out. I tried flashing the ROM, but that too is giving me build prop prop issues. Fuuuu. Any ideas?
I'm on rogue 1.1.2 which I've flashed cm7 with
Sent from my SPH-D710 using xda premium
you need a stock recovery on your phone first to properly flash cm9
either download miui or cm7, reboot, then go to recovery and follow the directions on installing it
you can't install it properly with a custom recovery at this point, or, at least, no one has reported that they are able to
So Kernel > Rom > Gapps > Factory Reset (For calendar sync) > reboot all good?+
If I odin the kernel, its goes on PDA right?
Doncabezon said:
So Kernel > Rom > Gapps > Factory Reset (For calendar sync) > reboot all good?+
If I odin the kernel, its goes on PDA right?
Click to expand...
Click to collapse
Yes you should be good after those steps.
Sent from my SPH-D710 using xda premium
NOT true...
you flash the rom and gaps only FIRST..
make sure everything works, then add a custom kernel...
and, make sure you are on a stock cm type kernel when you flash it, like what you get from MIUI or cm7, or it won't work
wase4711 said:
NOT true...
you flash the rom and gaps only FIRST..
make sure everything works, then add a custom kernel...
and, make sure you are on a stock cm type kernel when you flash it, like what you get from MIUI or cm7, or it won't work
Click to expand...
Click to collapse
C9 3.1 doesn't give clockwork so odin. The kernel goes on pda like the roms right?
I don't use Odin, I have OSX at home, so I use heimdall, and I don't want to give you bad info on Odin..there are lots of posts here about that though, so it will be easy to confirm for you
But, the bottom line is, you need to come from CM7 or MIUI first, then flash cm9/gaaps, wipe data, reboot
once you are sure everything works properly, then you can odin the 1.2.1C kernel..
wase4711 said:
I don't use Odin, I have OSX at home, so I use heimdall, and I don't want to give you bad info on Odin..there are lots of posts here about that though, so it will be easy to confirm for you
But, the bottom line is, you need to come from CM7 or MIUI first, then flash cm9/gaaps, wipe data, reboot
once you are sure everything works properly, then you can odin the 1.2.1C kernel..
Click to expand...
Click to collapse
Thanks. I had CM9 installed but never flashed a new kernel on CM9 so I am being as careful as possible
i know you can do it easily in Odin, but I don't want to give you bad info..
its nice to have a custom recovery with cm9!
Related
I had a few questions on how to do this. I eventually figured it out and since I didn't see an exact "Guide" on how to do this besides a few posts from the CM9 Discussion thread I decided to post the steps I did here.
Hope this helps somebody!
WARNING: FOLLOWING THIS GUIDE WILL CAUSE YOU TO LOSE YOUR DATA (SDCARD will be fine though).
These are the exact steps I did.
1- Auto Restore Using ODIN via sfhub's TAR file to EL29; here (I used the SPH-D710.EL29_CL852097_ROOTED-oc-sfx.exe)
2- To install CWM, I used the Auto Root package (Option C) then (Option L); here
3- I then downloaded CM7 and GAPPS here and placed them on my microSD card
4- Booted into recovery and wiped data/factory reset, wipe cache, wipe dalvik cache, and go back to "Mounts and Storage" and clicked on format /system. I then flashed CM7 and GAPPS (Directions on how to flash here here)
5- Go back to the main menu of recovery and reboot system
6- I verified I was able to boot into CM7 without any issues (Wait until it completely loads and did another reboot).
(Optional) I went back into recovery and made a backup
7- I then downloaded the CM9 zip file and GAPPS file (Download here scroll down for Alpha4 and GApps v7.1) and placed both of these on the microSD card
8-I then booted into recovery and flashed the CM9 zip file, flashed GApps v7.1 file, and wiped data/factory reset; (how to video here)
9- Reboot system
10- Enjoy CM9!
(Optional) You won't have a custom recovery after you flash CM9. If you want a custom recovery, I recommend you use this one here. I flashed it through Mobile ODIN and had no problems. I used the "Rogue Stock FB21 rev2 (Odin Tar)". Read this post if you want to flash through regular Odin here
Thank you very much. I was looking for something just like this
EDIT: Why can't you flash straight to CM9?
Korey_Nicholson said:
Thank you very much. I was looking for something just like this
Click to expand...
Click to collapse
Not a problem! Happy to share this stuff for everyone
Vandam500 said:
Not a problem! Happy to share this stuff for everyone
Click to expand...
Click to collapse
Why can't you flash straight to CM9?
Korey_Nicholson said:
Why can't you flash straight to CM9?
Click to expand...
Click to collapse
Honestly I'm not sure. I've seen several posts of people having issues when trying to go from any of the leaked ICS ROMs to CM9 (Some of them semi-bricking their devices). This is apparently the safest way to do it.
Korey_Nicholson said:
Why can't you flash straight to CM9?
Click to expand...
Click to collapse
You can but you keep hearing people saying "iz brickz my fone" all the time because they tried to install CM9 with a kernal or rom that doesnt play very nice. So this is in a way the safest way to do it if you dont want to have any trouble. Ive been doing it like this since thats what someone posted on the cm9 thread when it first came out.
Edit: lo0l you beat me to the reply
Sounds good. Doesn't CM9 come with a kernel though?
If not, which kernel do you recommend using with CM9?
Korey_Nicholson said:
Sounds good. Doesn't CM9 come with a kernel though?
Click to expand...
Click to collapse
Ya it does since its an AOSP kernal.
Sephirothvfc said:
Ya it does since its an AOSP kernal.
Click to expand...
Click to collapse
Which kernel do you recommend using with CM9? What comes with it?
Korey_Nicholson said:
Which kernel do you recommend using with CM9? What comes with it?
Click to expand...
Click to collapse
At the moment thats the only kernal you can use with it. no other AOSP kernal out there that is available to download. Atleast this is from what i understand. First time rooting phones after i got this phone. Still getting the hang of all this.
Vandam500 said:
I had a few questions on how to do this. I eventually figured it out and since I didn't see an exact "Guide" on how to do this besides a few posts from the CM9 Discussion thread I decided to post the steps I did here.
Hope this helps somebody!
WARNING: FOLLOWING THIS GUIDE WILL CAUSE YOU TO LOSE YOUR DATA (SDCARD will be fine though).
These are the exact steps I did.
1- Auto Restore Using ODIN via sfhub's TAR file to EL29; here (I used the SPH-D710.EL29_CL852097_ROOTED-oc-sfx.exe)
2- To install CWM, I used the Auto Root package (Option C) then (Option L); here
3- I then downloaded CM7 and GAPPS here and placed them on my microSD card
4- Booted into recovery and wiped data/factory reset, wipe cache, wipe dalvik cache, and go back to "Mounts and Storage" and clicked on format /system. I then flashed CM7 and GAPPS (Directions on how to flash here here)
5- Go back to the main menu of recovery and reboot system
6- I verified I was able to boot into CM7 without any issues (Wait until it completely loads and did another reboot).
(Optional) I went back into recovery and made a backup
7- I then downloaded the CM9 zip file and GAPPS file (Download here scroll down for Alpha4 and GApps v7.1) and placed both of these on the microSD card
8-I then booted into recovery and flashed the CM9 zip file, flashed GApps v7.1 file, and wiped data/factory reset; (how to video here)
9- Reboot system
10- Enjoy CM9!
(Optional) You won't have a custom recovery after you flash CM9. If you want a custom recovery, I recommend you use this one here. I flashed it through Mobile ODIN and had no problems. I used the "Rogue Stock FB21 rev2 (Odin Tar)". Read this post if you want to flash through regular Odin here
Click to expand...
Click to collapse
I flashed the Rogue Stock FB21 kernel like you said. Is it suppose to give me the yellow triangle on the splash screen?
Korey_Nicholson said:
I flashed the Rogue Stock FB21 kernel like you said. Is it suppose to give me the yellow triangle on the splash screen?
Click to expand...
Click to collapse
If you odin a kernal into your phone even if its stock, yes it will give you the yellow triangle
Sephirothvfc said:
If you odin a kernal into your phone even if its stock, yes it will give you the yellow triangle
Click to expand...
Click to collapse
NoOoOoOo! I was such a good boy lol
Korey_Nicholson said:
NoOoOoOo! I was such a good boy lol
Click to expand...
Click to collapse
You can always redo step 1 and 2 and it will remove it. Then just restore your last backup of the El29 rom not CM9 lol
You can always just use this on ics
http://forum.xda-developers.com/showthread.php?t=1494114
Works great on cm9
Sent from my SPH-D710 using XDA App
Epix4G said:
You can always just use this on ics
http://forum.xda-developers.com/showthread.php?t=1494114
Works great on cm9
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
+1 to this Got rid of mine after I Odin'd in the FB21 kernel as well. It's now forever on my sdcard from here on out for ICS related stuff.
Korey_Nicholson said:
I flashed the Rogue Stock FB21 kernel like you said. Is it suppose to give me the yellow triangle on the splash screen?
Click to expand...
Click to collapse
I saw the yellow triangle on the screen but it always went past it and booted right into the ROM. Is that what you mean't?
I just flash stock CWM, wipe everything including system, and then flash CM9. Perfect all the way
Sent from my SPH-D710 using XDA App
I was on the leaked ICS ROM and want to go back to a different ROM. My phone is kinda soft bricked now. I downloaded the EL29 auto restore and it's running now but it's stuck at the last percentage (data.img) part.
It's been sitting here for 30+ minutes and last night I let it sit for about 1.5 hours.
My phone won't boot up but I can get into download mode but it won't auto restore to the EL29. I don't know what I'm missing. Any help would be appreciated.
Thanks.
Android300ZX said:
I was on the leaked ICS ROM and want to go back to a different ROM. My phone is kinda soft bricked now. I downloaded the EL29 auto restore and it's running now but it's stuck at the last percentage (data.img) part.
It's been sitting here for 30+ minutes and last night I let it sit for about 1.5 hours.
My phone won't boot up but I can get into download mode but it won't auto restore to the EL29. I don't know what I'm missing. Any help would be appreciated.
Thanks.
Click to expand...
Click to collapse
sorry my friend but its time to exercise your Insurance. Look in general as there is a specific thread for your issue. Did you use the Hitman recovery from Steady Hawkin?
Your phone is bricked
http://forum.xda-developers.com/showthread.php?t=1504808 - You may want to look at this one
http://forum.xda-developers.com/showthread.php?t=1509795
http://forum.xda-developers.com/showthread.php?t=1516868
http://forum.xda-developers.com/showthread.php?t=1524463
There's more just did not want to clutter the thread up anymore
I'm sorry, Im confused. I have been searching and I have read 3 seemingly contradictory facts:
- NEVER flash CM9 with any other recovery other than clockwork mod
- NEVER use odin to flash clockwork mod on an ICS rom
- You can flash a newer version of CM9 over the old one
So i'm using CM9 RC0 and I would like to update to alpha2 without wiping. CWM disappeared when i flashed and I keep reading that its dangerous to use the stock rouge recovery. So I went to go use odin to get CWM back on but there is a warning to never try to load it using an ICS rom?
Where am I going wrong here? I really dont want to wipe and flash to a GB rom just so that I can use odin to get CWM and flash back to cm9.
Thanks, I just wanted to make sure i didn't ruin my phone!
drumstyk1 said:
I'm sorry, Im confused. I have been searching and I have read 3 seemingly contradictory facts:
- NEVER flash CM9 with any other recovery other than clockwork mod
- NEVER use odin to flash clockwork mod on an ICS rom
- You can flash a newer version of CM9 over the old one
So i'm using CM9 RC0 and I would like to update to alpha2 without wiping. CWM disappeared when i flashed and I keep reading that its dangerous to use the stock rouge recovery. So I went to go use odin to get CWM back on but there is a warning to never try to load it using an ICS rom?
Where am I going wrong here? I really dont want to wipe and flash to a GB rom just so that I can use odin to get CWM and flash back to cm9.
Thanks, I just wanted to make sure i didn't ruin my phone!
Click to expand...
Click to collapse
What you want to do is flash the EL26 kernel with CWM through Odin. Once it's flashed and the phone starts to reboot, pull the battery. Put the battery back in, boot into recovery via Vol up+ power and then flash Alpha 2 over RC0, flash GApps and reboot. You should be good to go then.
Sent while hanging with that really hoopy frood Ford Prefect.
If you haven't already, I believe the OP has updated the steps fairly well here:
How Not to Brick Your E4GT
Flashing roms on Epic4gtouch is so complicated. I remember when I had my HTC hero. All you gotta do is download the rom, put it in your sdcard, open rom manager then flash xD
snapback2 said:
Flashing roms on Epic4gtouch is so complicated. I remember when I had my HTC hero. All you gotta do is download the rom, put it in your sdcard, open rom manager then flash xD
Click to expand...
Click to collapse
This is a recent thing that started when the ICS leaks started coming. Before ICS, rooting and flashing this phone was as easy as any. It still is actually, but you have to be more careful, especially with any of the AOSP ROMs. It should be back to normal once the official ICS update is released and we get our hands on the source code.
Sent from my SPH-D710 using Tapatalk
blackroseMD1 said:
What you want to do is flash the EL26 kernel with CWM through Odin. Once it's flashed and the phone starts to reboot, pull the battery. Put the battery back in, boot into recovery via Vol up+ power and then flash Alpha 2 over RC0, flash GApps and reboot. You should be good to go then.
Click to expand...
Click to collapse
Worked perfectly! Hopefully you have helped many noobs down the road when they search for this. What threw me off was QBKings video when he kept warning to never flash EL26 on ICS. (Mad respect though, QBKing!). Thanks for clearing that up for me!
On a side note, yeah, things seem complicated. I know there is a good reason why CM9 doesn't include a good recovery but I hope as things develop we will eventually get back to the "Rom Manager" days. Man, our devs spoil us!
Hey all can't post in the rom's thread so here will have to do hope someone can answer this.
Got the rom working fine. The issue is A.) I lose CMW
why? and is there a guide for installing cmw standalone without flashing a kernel?
B.) gapps don't appear even though i def flashed them as OP said to.
Permutations tried so far:
- OP verbatim
- OP + F10AOKP kernal as recommended in OP
Thanks to any and all
using cwm with an ics kernel has been causing bricks. It happened to me once already had the have best buy replace my phone. Most devs aren't packing cwm with ics kernels for the time being this may change but for now its safer this way. When I need to flash something I use mobile Odin to flash back to el26 then I wipe cache flash what I need then flash an aosp kernel : ) and boot
Sent from my SPH-D710 using xda premium
Irshin said:
using cwm with an ics kernel has been causing bricks.
Click to expand...
Click to collapse
Thanks for clearing that up for me! Also I figured out my gapps issue some trial and error led me to follow CM9's gapps link and that did the trick.
you lose your recovery because of two related reasons:
1) on this device (not sure if it applies to all samsung devices, though i think it does apply to most), kernel and recovery are packaged together and therefore always flashed at the same time. when you flash a kernel, you always lose whatever recovery you had before.
1.1) since you flashed aokp, which includes a kernel, you therefore lost your recovery because of reason 1. no big. next time you need to flash something over AOKP or make a nandroid, just odin el26 kernel which includes cwm (search for it, not gonna link it), and do your thing. just remember to reflash the ROM before rebooting cuz el26 is a gb kernel which wont work with aokp (because it's ICS).
Also you should read the first couple post in the thread....it explains what is what with the ROM and that it doesn't have cwm ...etc
Sent from my SPH-D710 using Tapatalk 2
OK, I may get yelled at for asking about this considering the number of Wikis and threads out there, but I wanted to be sure: are there instructions for ClockworkMod Recovery installation specifically for the Boost Mobile version of the SPH-D710, which ships *with* ICS? Most of the tutorials I've seen ask you to use Odin to install a gingerbread rooted kernel, if I remember correctly, which I imagine will blow up in my face if I try to install it on a stock ICS installation. The eventual goal here is to get a CyanogenMod 10 nightly installed.
Thanks!
Okay, after some additional googling, I found this:
HXXP://androidforums.com/galaxy-s2-boost-mobile-all-things-root/619169-boost-sgs2-fh29-root-achieved.html[/url]
(apparently I can't post links yet)
The instructions start off as a "how to root" guide, but later the author discusses additional steps to CM10. Will try it out soon, unless anyone has a more current guide available.
I had my phone on stock ota ff18 then used Odin on PC to flash on chris41g safe el26 with cwm. Then flashed on from there.
Sent from my SPH-D710 using XDA
Just do this,
1. Download the CM10 test build/ROM (No official nightlies, just test builds) of your choice. Don't forget the gapps! Transfer the files to you sdcard.
2. Download EL26 stock with CWM on your pc. (Search it, easy to find).
3. Download Odin is you don't have it. Open odin, press the "PDA" slot, and select the EL26 kernel.
4. Put phone into download mode and Connect the usb from your pc to phone. Lastly, click start on odin to flash the EL26 kernel.
5. Once the kernel is flash, the phone will not boot into the ICS ROM of course. Boot phone into recovery.
6 Clear data, cache, and dalvik cache. After, Select install zip, select zip from SDcard, choose the CM10 or ROM of your choice, let it flash. Then select the gapps zip to flash. (Press, VOL down, VOL up, and VOL down. this should enable the option to press power button for selections.)
This are the steps I suggest to use because EL26 is the safest kernel we suggest to use when flashing any AOSP, AOKP, and any ROM in general. If you want to be on the safe side.
Enjoy!
Febby said:
Just do this,
This are the steps I suggest to use because EL26 is the safest kernel we suggest to use when flashing any AOSP, AOKP, and any ROM in general. If you want to be on the safe side.
Click to expand...
Click to collapse
Thanks for the detailed instructions! I will try it out this week at some point.
Or you can use
SPH-D710.FF18_CL663858_ROOTED-OneClick file it come rooted injected ... its the same file for the epic touch 4g so it works for both carriers
ICS sph-d710
martopoulos said:
OK, I may get yelled at for asking about this considering the number of Wikis and threads out there, but I wanted to be sure: are there instructions for ClockworkMod Recovery installation specifically for the Boost Mobile version of the SPH-D710, which ships *with* ICS? Most of the tutorials I've seen ask you to use Odin to install a gingerbread rooted kernel, if I remember correctly, which I imagine will blow up in my face if I try to install it on a stock ICS installation. The eventual goal here is to get a CyanogenMod 10 nightly installed.
Thanks!
Click to expand...
Click to collapse
Ilike your applications thank you
I have been looking around for about an hour or two trying to find a solid tutorial on how to install a custom recovery to install new Roms. I flashed my phone onto Virgin Mobile on FH13. It seems to me that there is more than meets the eye to installing a recovery on this phone. I really don't want to mess anything up at all. Could anyone guide me the right way as to how I can get CWM on my phone? I appreciate any help you can give me. Thanks!
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
RainMotorsports said:
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
Click to expand...
Click to collapse
Also new to the e4gt, im currently rooted on fh13.
say i want to flash paranoidandroid, which kernel (which includes recovery?) would you recommend?
also this is either flashed from odin (pc) or can be done through mobile odin?
then once kernel is flashed, i can then reboot into recovery, wipe and flash rom/gapps?
sorry for all the questions, just want to make sure!
bongzilla said:
Also new to the e4gt, im currently rooted on fh13.
say i want to flash paranoidandroid, which kernel (which includes recovery?) would you recommend?
also this is either flashed from odin (pc) or can be done through mobile odin?
then once kernel is flashed, i can then reboot into recovery, wipe and flash rom/gapps?
sorry for all the questions, just want to make sure!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1953783
RainMotorsports said:
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
Click to expand...
Click to collapse
My phone already has root. Everything else is stock. 4.0.4, build FH13, with no custom recoveries.
I don't understand what you mean in your second paragraph with "repacked stock" or "custom tw kernel".
I am completely lost as to where I should be going. My plan is to install this rom: http://goo.im/devs/Shabbypenguin/E4GT-Nightlies
How would I go around to getting this on my phone?
Also, what about this rom: http://forum.xda-developers.com/showthread.php?t=1810315
I am not sure which rom runs the fastest and most efficient. There are so many kernels for so many things, I have absolutely no idea which kernel to flash and how to flash it.
EDIT: So I have done some more reading up and I THINK I can starting to understand some of it. I assume the steps are to:
1. Install Mobile Odin Lite on my phone.
2. Flash the EL26 kernel on Odin Lite. Link to kernel: http://forum.xda-developers.com/showthread.php?t=1662295 (first kernel on the page)
3. This part I am kinda lost. Not sure if that kernel installed a new recovery or not. I assume I just reboot and go into recovery.
4. Nandroid a backup of my ICS stock that is on now? Can I even go back to this stock backup after putting on a new Rom? Which kernel would I need to install backup of stock?
5. Wipe data, dalvic, and install new Rom using instruction it came with. My problem is I want to run this Rom: http://goo.im/devs/Shabbypenguin/E4GT-Nightlies and it has no instructions. I assume you just wipe data and dalvic?
6. flash Rom, then flash Gapp? It doesn't have a link for any of the Gapps, so either I have to find a link to download Gapp or that rom already comes with it? Not sure.
7. Reboot into new Rom? Not sure if I missed a step or not.
Another question I have is with the kernels. Can I just leave it on the EL26 kernel for daily use of the phone? Say I want to install maybe cm10 next, do I just keep it on EL26?
Sorry for the spam of questions. I like to be 100% certain.
Best bet if your trying to install CM9 is to go to the EL26 CWM kernel as all of the AOSP rom instructions dictate. Using the EL26 kernel means your phone will only boot to Download and Recovery as it will only boot gingerbread roms.
Download the nightly you want to the device and then flash the EL26 CWM kernel in Mobile ODIN. After its all over with you might need to battery pull if you messed up booting into recovery and then boot into recovery (power + vol up). Install the rom. Install gapps. Wipe cache/dalvik but as I will recommend below you should just backup everything and a full wipe.
You can nandroid if you want but it will be making a copy of the ICS rom you have with the EL26 kernel on it so it is literally a restore to the point your starting from not where you were just before that. Its still a good idea if your afraid of losing things. I would use Super Backup from the market to backup your Contacts, Call Logs and MMS. Wipe cache and dalvik and all that. But realisticly you should backup your apps and data if you have Titanium Backup and start fresh just factory reset after your on CM9. Restore your apps with data (no system data) after that. A clean install will present the least of issues, even the Samsung updates from one rom to another are not without issues.
You can not boot anything but gingerbread with EL26 and once you install a rom you will be on the kernel with that rom. So you will have a Linux 3 android kernel with cwm 6 if you go with a CM9 nightly. From there you can flash the next nightly or the next beta etc. Older stuff will not flash from your new setup as AOSP roms have switched to a new device name in the build.prop.
As far as gapps here it is - http://goo.im/gapps/gapps-ics-20120429-signed.zip and don't forget to put this on the device ahead of time or you will have to mount usb and transfer using the pc in recovery.
RainMotorsports said:
Best bet if your trying to install CM9 is to go to the EL26 CWM kernel as all of the AOSP rom instructions dictate. Using the EL26 kernel means your phone will only boot to Download and Recovery as it will only boot gingerbread roms.
Download the nightly you want to the device and then flash the EL26 CWM kernel in Mobile ODIN. After its all over with you might need to battery pull if you messed up booting into recovery and then boot into recovery (power + vol up). Install the rom. Install gapps. Wipe cache/dalvik but as I will recommend below you should just backup everything and a full wipe.
You can nandroid if you want but it will be making a copy of the ICS rom you have with the EL26 kernel on it so it is literally a restore to the point your starting from not where you were just before that. Its still a good idea if your afraid of losing things. I would use Super Backup from the market to backup your Contacts, Call Logs and MMS. Wipe cache and dalvik and all that. But realisticly you should backup your apps and data if you have Titanium Backup and start fresh just factory reset after your on CM9. Restore your apps with data (no system data) after that. A clean install will present the least of issues, even the Samsung updates from one rom to another are not without issues.
You can not boot anything but gingerbread with EL26 and once you install a rom you will be on the kernel with that rom. So you will have a Linux 3 android kernel with cwm 6 if you go with a CM9 nightly. From there you can flash the next nightly or the next beta etc. Older stuff will not flash from your new setup as AOSP roms have switched to a new device name in the build.prop.
As far as gapps here it is - http://goo.im/gapps/gapps-ics-20120429-signed.zip and don't forget to put this on the device ahead of time or you will have to mount usb and transfer using the pc in recovery.
Click to expand...
Click to collapse
Ah, I read it twice and now it makes more sense. I have a pretty good idea of what to do now.
Put rom and gapp on phone, install EL26, backup, full wipe, flash rom and gapp, rom will install new kernel for me, then just reboot.
Last question, I just want to make sure. What exactly is a full wipe on this phone. I have done plenty of full wipes on the evo 4g. I am just asking because I hear some people have problems when they do a full wipe.
I really appreciate your help. Thank you!
Sorry if I jumbled everything together in my post by the I was running out the door. But this Hurricanne has stopped that and I regret not taking my time.
Well what I mean is a factory reset which formats /Cache and /Data. When you install the rom its going to format /System prior to writing the new firmware/rom. /Data has all your user apps, their data and your information etc. This does not wipe the Internal SD or the External SD though at times a line saying it was does come up in CWM.
Just don't do a Factory reset on the stock kernel you are on now, its fine on EL26 its fine on the kernels that come with the CM9 nightlies. Super Backup apparently does app's now too. I have never used it since I have Titanium Backup Pro but figured its also worth mentioning.
A note on turning back. As I said before if you flash the EL26 CWM kernel you wont be able to boot the ICS rom installed on the phone. At that point to go back instead of forward you can flash the FH13 kernel in desktop ODIN or the zip in CWM and you will have the FH13 kernel instead of EL26 and be back where you were. But once you flash the EL26 CWM kernel your goal at that point is flashing your rom of choice in CWM and not things like booting the phone.
You should be "okay" coming from a dirty install just wiping cache. But you may never know if a problem your having is the rom or some left over data unless you go clean and factory reset. Its a choice and its also a choice you can make later as you can always reset later. I would back up anything important first before doing any of this. Not so much a worry about bricking, as just about any normal situation will be recoverable, but more so to the point of if you have to wipe the phone and start from scratch.
RainMotorsports said:
Sorry if I jumbled everything together in my post by the I was running out the door. But this Hurricanne has stopped that and I regret not taking my time.
Well what I mean is a factory reset which formats /Cache and /Data. When you install the rom its going to format /System prior to writing the new firmware/rom. /Data has all your user apps, their data and your information etc. This does not wipe the Internal SD or the External SD though at times a line saying it was does come up in CWM.
Just don't do a Factory reset on the stock kernel you are on now, its fine on EL26 its fine on the kernels that come with the CM9 nightlies. Super Backup apparently does app's now too. I have never used it since I have Titanium Backup Pro but figured its also worth mentioning.
A note on turning back. As I said before if you flash the EL26 CWM kernel you wont be able to boot the ICS rom installed on the phone. At that point to go back instead of forward you can flash the FH13 kernel in desktop ODIN or the zip in CWM and you will have the FH13 kernel instead of EL26 and be back where you were. But once you flash the EL26 CWM kernel your goal at that point is flashing your rom of choice in CWM and not things like booting the phone.
You should be "okay" coming from a dirty install just wiping cache. But you may never know if a problem your having is the rom or some left over data unless you go clean and factory reset. Its a choice and its also a choice you can make later as you can always reset later. I would back up anything important first before doing any of this. Not so much a worry about bricking, as just about any normal situation will be recoverable, but more so to the point of if you have to wipe the phone and start from scratch.
Click to expand...
Click to collapse
That clarified a lot, thanks.
So I did it all. I did a factory reset from the new kernel. did dalvic also. I installed the new rom and gapp. Problem is that once I reboot, it shows the Galaxy SII screen, then goes into a black screen. I can't turn it back on again, so I remove the battery and it can restart. Does the same thing though. I followed your instruction and http://e4gtcm.blogspot.com/p/cm9-install-guide.html
What did I do wrong? I am worried I messed up my phone completely.
EDIT: So I went back into recovery and it was now a new version of CWM. I did everything over again; factory reset, cache, dalvic, and it is doing the same thing. Boots up "Galaxy SII" screen, then a black screen. It seems to still be on in the black screen seeing that it doesn't "turn" on again. I can hold if for 15 second or so for it to reset and does the same thing. Why is there a black screen?
Sorry for not checking back. Your probably freaking right now lol but relax your at a good point everything is fine.
Either a bad download or the nightly you went with happens to be a baddy. I am still on 10/20 I was gonna flash 10/28 today but the weather is screwing with me. goo.im seems pretty slow today.
Download another, battery pull and hold vol up + power until it hits recovery then go into mounts and mount usb storage hook a usb cable to the pc and copy over another build. I would say try 10/20 just because it works pretty good but that won't stop another bad download in which case you have to try try again.
Worst case from here we can just odin you back to stock rooted FH13 or your choice of other. Your phone is fine from what you have told me so far. I can upload one of the builds I have if you think ti would help any.
RainMotorsports said:
Sorry for not checking back. Your probably freaking right now lol but relax your at a good point everything is fine.
Either a bad download or the nightly you went with happens to be a baddy. I am still on 10/20 I was gonna flash 10/28 today but the weather is screwing with me.
Download another, battery pull and hold vol up + power until it hits recovery then go into mounts and mount usb storage hook a usb cable to the pc and copy over another build. I would say try 10/20 just because it works pretty good but that won't stop another bad download in which case you have to try try again.
Worst case from here we can just odin you back to stock rooted FH13 or your choice of other. Your phone is fine from what you have told me so far.
Click to expand...
Click to collapse
Phew! I was pretty positive that I could still get back to something working, just my paranoid self was getting tense. I got 10/28. I guess I will do 10/20. Do you know what the other updates have? I would hate to install something that isn't working its most efficient.
Again, thank you so much. You were of great help! Good luck with the weather issue. Hope you're safe!
I stopped following chris's experimentals so i am not sure what the most recent focuses have been. The Nightlies have whatever code was commited. They are built automatically and can range from very stable to not booting at all. I dont have any of the links on me but someone can get it to you. Reading commits is not exactly 100% user friendly especially if your not a developer. But they often have clues. I would follow the CM9 Beta thread and the CM9 User Support Threads - http://forum.xda-developers.com/showthread.php?t=1874374 and http://forum.xda-developers.com/showthread.php?t=1720771
I used to DL nightlies from work over 3g or 4g all the time and would get a bad dl and end up in situations where even my experienced self felt like I couldn't fix it till I got home and always got the phone running within an hour without the assistance of a near by pc.
I am uploading 10/20 to my server just in case its in Chicago so if your away from the weather it should be unaffected for the most part. Glad its not in NY anymore.
EDIT - http://android.rainmotorsports.net/10-20-CM9-d710-KANG.zip the md5 hash as I have it is 66246125ACDBEF2EBF2144E0CBFEBB7B and it matches the md5 listed on goo.im
RainMotorsports said:
I stopped following chris's experimentals so i am not sure what the most recent focuses have been. The Nightlies have whatever code was commited. They are built automatically and can range from very stable to not booting at all. I dont have any of the links on me but someone can get it to you. Reading commits is not exactly 100% user friendly especially if your not a developer. But they often have clues. I would follow the CM9 Beta thread and the CM9 User Support Threads - http://forum.xda-developers.com/showthread.php?t=1874374 and http://forum.xda-developers.com/showthread.php?t=1720771
I used to DL nightlies from work over 3g or 4g all the time and would get a bad dl and end up in situations where even my experienced self felt like I couldn't fix it till I got home and always got the phone running within an hour without the assistance of a near by pc.
I am uploading 10/20 to my server just in case its in Chicago so if your away from the weather it should be unaffected for the most part. Glad its not in NY anymore.
EDIT - http://android.rainmotorsports.net/10-20-CM9-d710-KANG.zip the md5 hash as I have it is 66246125ACDBEF2EBF2144E0CBFEBB7B and it matches the md5 listed on goo.im
Click to expand...
Click to collapse
I just got it downloaded. It is now up and running perfectly. I appreciate all your help man, thanks a bunch. I live in Washington state. So the weather wont affect me.
Good evening all. I hope this is the right forum to post my question about recovery for my e4g touch. I recently rooted my phone and my phone is currently on the fi27 build. Is there a recovery i can put on there now to go ahead and start flashing ruins, or will i have to wait for qbkng77 to post his video on you tube on putting cwm recovery on fi27 rooted e4g touch? Thanks in advance for the help!
Sent from my SPH-D710 using xda app-developers app
n1stunna84 said:
Good evening all. I hope this is the right forum to post my question about recovery for my e4g touch. I recently rooted my phone and my phone is currently on the fi27 build. Is there a recovery i can put on there now to go ahead and start flashing ruins, or will i have to wait for qbkng77 to post his video on you tube on putting cwm recovery on fi27 rooted e4g touch? Thanks in advance for the help!
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I assume you do the same thing as I did. Get the EL26 kernel and flash it with Mobile Odin. I would wait on someone else to confirm that though.
Another really quick question. I want to overclock my phone. I tried using setcpu and the overclocker it came with. It only goes to a max of 1200 but I know it can go higher. I am guessing I need another kernel. What kernel can I use?
joshlete said:
Another really quick question. I want to overclock my phone. I tried using setcpu and the overclocker it came with. It only goes to a max of 1200 but I know it can go higher. I am guessing I need another kernel. What kernel can I use?
Click to expand...
Click to collapse
You either need a kernel with built in over clock support(you'd see the CPU slider go up to 1400-1600 automatically if it was). Or a kernel that supports over locking in tegrak, which you "load over clock module" with in tegrak.
Both Kuban kernel and some of Agats kernels have built in support, mine you need to use tegrak as I have not added built in yet
You can get them all in rwilco's (awesome) kernel repository stickied in development
Sent from my SPH-D710 using xda premium