[Q] problem installing 1.28 - HTC One X

the new custom roms with 1.28 version i cant get working good
i have tried android revolution and insertcoint
by flashing the rom and flashing the boot.img with cmd
the roms start up good but as soon as i try to install a new ringtone, play a game or open an app as runkeeper it will reboot
has anyone got a solution for this problem?

not anyone with al sollution?

Related

Question to all 1.28 stock and rooted rom

to those who have recently upgraded their one-x OTA to 1.28, if you have your stock rom rooted (not custom rom), can I check if you have problem with your GPS?"
I tried to use Google map, it causes my one-x to reboot. I thought it's Google map problem, but realize that with my runkeeper it's the same, the moment it got GPS fix, and try to run, it freezes the system and causes it to reboot.
I did a clean RUU flash then update 1.28 OTA and it looks ok. Problem happened when I root the ROM (using the insecure boot image)
nobody has the problem?
no issues with gps here on my stock rom.
sr1ks said:
no issues with gps here on my stock rom.
Click to expand...
Click to collapse
+1
why don't you put on the original 1.28 recovery ? You'll still be rooted.
No problems here to on rooted 1.28.Try to reflash.
I flashed stock recovery and RUU and upgrade with the same problem >.<
Let me try again ...
No problems here too on stock ROM (1.28.980.10 Optus handset). I actually used the GPS today and it worked like a treat.
shadowboy23 said:
No problems here too on stock ROM (1.28.980.10 Optus handset). I actually used the GPS today and it worked like a treat.
Click to expand...
Click to collapse
damn ... it didn't work. the moment the apps start to use the GPS (after acquiring a fix), e.g. during navigation or runkeeper starts logging my distance, the device will hang and reboot.
no problem if I do a cwm recovery back to the rooted 1.26
going to do ruu 1.28.707 flash directly to see if it helps.
just to be sure, all of you who reported to haven o problem, are you using rooted stock 1.28.707.10 and not custom rom?
Didn't have any problems on the 1.28. Altough I must say when I upgraded to 1.29 the GPS works better. Faster fix and more accurate location. Maybe a try?

[Q] CM10 getting very slow after flashing google apps

Hi Guys,
Every time I flash gapps package on any aosp based rom my phone becomes unbearably slow,
apps takes a very long time to start and boot takes more than 5 minutes to finish.
I've tried CM10,AOKP,CM10 Endeavor Unleashed and jellybam and all of them seems to have the same issue, also I tried flashing an older gapps version, and flashing many different kernels but nothing seems to fix the issue.
This issue didn't happen on stock based roms like ARHD or Renovate they run very smoothly and without any problem.
its driving me mad and I couldn't find anyway to fix it.
I'm running hboot 1.31 so if anyone could tell me how to fix this issue it would be very appreciated,
Thanks.

[Q] Problem with wifi :(

Hi all
I was using an old version of JellyTime ROM on my DHD, then I installed the newest version (after a full wipe). The wifi couldnt find any network after the update(I thought its a problem with the ROM). I tried wifix and it worked perfectly.
After few days I decided to try another ROM. I tried PACman, CodefieX, Xperia Honami and Oxygen JB (all jellybean 4.2.2) and the wifi problem was not fixed.
Then I tried an old version of CodefireX (still 4.2.2) and wifi worked perfectly.
Flashing a new version results the same problem .
Any help guys please :crying:​
Try going back to 2.3.7 CM7 and flash another ROM. Sounds like a hardware problem though
"Two types of people: Those who buy iPhones; and those who are intelligent. I'm intelligent."
- Guy
I experienced this issue when I flashed a new ROM.
I solved the issue by flashing boot.img from the ROM manually.
You can find the boot.img file from the zip file of the ROM. Boot the phone into fastboot mode and connect the phone to PC. Use the command:
fastboot flash boot boot.img
If you don't know how to use fastboot command on PC, find it from some other threads.
Hope it is helpful for you.

WiFi not working on HTC one m8

Hi I pretty much know nothing about custom roms etc but I was forced to go for a custom ROM due to a friend wiping my phone but when I flashed Viper 3.2.1 everything was fine except the wifi button was greyed out, I also tried android revolution and the same problem occured. However it was fine when i tried candy5 but once i flashed google play the wifi stopped working again.
Does anyone know what the problem is and how i should fix it? thanks.
Hope you are on latest 4.4.4 firmware , link for the same should be in OP/FAQ of Viper.
fandam said:
Hi I pretty much know nothing about custom roms etc but I was forced to go for a custom ROM due to a friend wiping my phone but when I flashed Viper 3.2.1 everything was fine except the wifi button was greyed out, I also tried android revolution and the same problem occured. However it was fine when i tried candy5 but once i flashed google play the wifi stopped working again.
Does anyone know what the problem is and how i should fix it? thanks.
Click to expand...
Click to collapse
If you are only unlocked and not s-off you will need to manually flash the corresponding boot.img for each rom each time you flash a new rom. If you can get s-off you won't need to do this anymore.
Firmware needs to be updated. Confirmed on OP's other thread here: http://forum.xda-developers.com/htc-one-m8/help/htc-one-m8-bricked-t2989202/page2
Also its not necessary to manually extract and flash boot.img on the M8, even when s-on. Folks giving this advice may be carrying over knowledge from an older HTC device.

[SOLVED][Q] ART building bootloop - anyone else seen this?

Hi, Ive not long had my m9. When i got it it updated straight away and got the charging bug.
Since then I have s-off'd and tried various roms with not too much luck.
I now have a bug that occurs when i flash a new rom. This has happened when i flashed 3 different roms. Leedroid, Viper and android revolution. the rom flashes ok, then starts to boot, and builds art. It then finishes building art and starts to complete the boot process, and then it reboots and tries to build art again.
I flash back to my stock backup and everything is fine again. (apart from the damned charging bug)
Has anyone else experienced something similar?? am i missing something??
Go in twrp and make factory reset
just tried that, didnt work
Did you update your firmware? if you're still on 1.x firmware, those 2.x roms will reboot.
yeah. have tried matching roms to firmware and still get the same result. trying viper one currently. in a massive bootloop again. It boots enough to say "nfc service has stopped working" and thats what made me think it might be firmware, but it seems to make no difference.
cant even adb whilst its booting.. getting waiting for device.
What version of twrp are you using?
2.8.6.1
philicibine said:
2.8.6.1
Click to expand...
Click to collapse
Update to 2.8.7.0 and see if it continues.
I've solved this, and my charging issue. Finally!!
I decided to flash the earliest ruu I could find and then let it do all of the ota updates itself.
I then rerooted, flashed updated firmware and am now running leedroid.
Thanks for the help guys.

Categories

Resources