to those who have recently upgraded their one-x OTA to 1.28, if you have your stock rom rooted (not custom rom), can I check if you have problem with your GPS?"
I tried to use Google map, it causes my one-x to reboot. I thought it's Google map problem, but realize that with my runkeeper it's the same, the moment it got GPS fix, and try to run, it freezes the system and causes it to reboot.
I did a clean RUU flash then update 1.28 OTA and it looks ok. Problem happened when I root the ROM (using the insecure boot image)
nobody has the problem?
no issues with gps here on my stock rom.
sr1ks said:
no issues with gps here on my stock rom.
Click to expand...
Click to collapse
+1
why don't you put on the original 1.28 recovery ? You'll still be rooted.
No problems here to on rooted 1.28.Try to reflash.
I flashed stock recovery and RUU and upgrade with the same problem >.<
Let me try again ...
No problems here too on stock ROM (1.28.980.10 Optus handset). I actually used the GPS today and it worked like a treat.
shadowboy23 said:
No problems here too on stock ROM (1.28.980.10 Optus handset). I actually used the GPS today and it worked like a treat.
Click to expand...
Click to collapse
damn ... it didn't work. the moment the apps start to use the GPS (after acquiring a fix), e.g. during navigation or runkeeper starts logging my distance, the device will hang and reboot.
no problem if I do a cwm recovery back to the rooted 1.26
going to do ruu 1.28.707 flash directly to see if it helps.
just to be sure, all of you who reported to haven o problem, are you using rooted stock 1.28.707.10 and not custom rom?
Didn't have any problems on the 1.28. Altough I must say when I upgraded to 1.29 the GPS works better. Faster fix and more accurate location. Maybe a try?
Related
So I recently installed MIUI, and as soon as I did my Wifi radio stopped working. Every time I try to switch it, it turns back off and says "error."
I figured this was a problem with my radio (26.02.01.15_M2) when I found another irksome problem. When I go to flash PC10IMG.zip the bootloader gets to "Checking PC10IMG.zip) and then quits and refuses to attempt the update.
Any ideas?
I apologize if this question has been asked, but I couldn't find anything similar in the short search I did.
Thanks in advance!
Could be a bad download? Which Radio are you trying to flash?
Download the radio from here http://forum.xda-developers.com/showthread.php?t=970809
Dont know what ROM you are running but Vision_Radio_12.52. 60.25_26.08.04.30 seems to be a good one,download the attached file for wiping the EFS(Important when flashing radios)
The link has further instructions and information,hope that helps
Hey, thanks for your response! I actually tried three different Radios from that thread (the first three), and none of them worked. I ran an efs wipe yesterday because I was having GPS problems, and these problems persisted after that...
FWIW, when I flash other kernels/ROMs, things work fine (CM7, PyroMod, Stock) but on MIUI these problems crop up.
alexonfyre said:
Hey, thanks for your response! I actually tried three different Radios from that thread (the first three), and none of them worked. I ran an efs wipe yesterday because I was having GPS problems, and these problems persisted after that...
FWIW, when I flash other kernels/ROMs, things work fine (CM7, PyroMod, Stock) but on MIUI these problems crop up.
Click to expand...
Click to collapse
Do you mean you can update the radio with other ROMs or do you mean that the wifi problem is only on MIUI?If your problem is only with MIUI cant help as I dont use that ROM but still doesnt explain your problem with flashing a radio as the bootloader is independent of the ROM
I think the wifi radio and the cellular radio are different and when you flash the radio firmware, it only updates the cellular radio firmware. Someone more knowledgable than me will probably correct me. It's probably something screwy with the MIUI roms which is effecting you. If you want to use MIUI then try one of the other MIUI roms that are out there and also notify the developer of the MIUI rom your using about your issue.
I hate the recent radios for G2 latest one from Bell sucks. Signal drops every few seconds, data connection is just OK. Very disappointed. I did the efs wipe and auto ril matcher V6 and all this other bs and I hate it.
Sent from my HTC Vision using xda premium
Yesterday my gps wasnt working at all. It would not lock on no matter what I did. I was on a custom rom and I tried wiping my data/cache, reinstalling maps (just for giggles), and a multitude apps from the market that help deal with gps problems (gps fix, gps status, toolbox, etc).
When all this didn't work I decided to odin back to the last official JB update and still no gps. On a whim I decided to odin back to an ICS firmware and that made my gps work. I have no idea but it did. I then odin to UVDLJC, installed TWRP's most recent and restored my backup of the custom rom I was using in the first place and gps now worked.
While I'm happy as heck that my gps is now working and that it was not a hardware issue I'm extremely curious what happened.
I have flashed many roms lately and I cannot think what a custom rom can do to gps to hose it or if it was just one of those things. I would of thought that when I originally did an odin to UVDLJC that would fix the issue but that didn't. Whatever the flash to ICS did fixed it but what in the heck could that of been?
I figure if I can find out or get an idea what happened then I can steer away from flashing certain roms, or just be prepared that flashing any roms at all can make this happen again.
Same here.
Hello, ddcoh.
I am currently having the same issue you had with GPS not working. I've tried everything from trying tedious Play store apps to trying many different roms and kernels (clean installing every time) to completely reverting back to stock including using TriangleAway in case that did any help. Nothing worked. I have been thinking about going back to ICS to see if that worked but the last time I tried to downgrade from 4.1.1 to 4.0.4 I ended up soft bricking my phone even though I followed the steps word for word.
Can you tell how you went about downgrading to ICS and then back to JB, please? I use my GPS a lot and I would hate to find out it's a hardware issue.
Typically, it's been when people are going from 4.2 to 4.1.
Zza1989 said:
Hello, ddcoh.
I am currently having the same issue you had with GPS not working. I've tried everything from trying tedious Play store apps to trying many different roms and kernels (clean installing every time) to completely reverting back to stock including using TriangleAway in case that did any help. Nothing worked. I have been thinking about going back to ICS to see if that worked but the last time I tried to downgrade from 4.1.1 to 4.0.4 I ended up soft bricking my phone even though I followed the steps word for word.
Can you tell how you went about downgrading to ICS and then back to JB, please? I use my GPS a lot and I would hate to find out it's a hardware issue.
Click to expand...
Click to collapse
Well I used odin to flash an T999_UVALEM which was a prerooted ICS rom. After booting it up I checked to see if GPS was working and it was.
I then used odin again to flash T999_UVDLJA which is a JB rom and booted it up also and saw that gps was working. Then I just restored a backup of a room I had been using and GPS still worked.
I've been out of town and noticed that after flashing a few roms that gps wasn't working so instead of doing all the above stuff I just flashed a cm10 rom. I believe I either used a cm10 nightly (or maybe 10.1, memory is hazy) or LiquidRom and that got the GPS working by just doing that. Not sure if that will work for you but you could always backup your setup using TWRP's latest and then flashing a cm10 rom and seeing if gps is working and if that fixes it then you could then just reboot and restore the rom you are currently on and that might fix your gps for you.
http://forum.xda-developers.com/showthread.php?t=1949687
I did a restore of my One-X to stock rom according to this tutorial.
http://design-extreme.net/restore-ht...-to-stock-rom/
This all went well and without problems. The RUU I flashed is this one.
RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Ra dio_5.1204.162.29_release_302015_signed
When I now startup the phone it all works perfect. Then the phone says there is an OTA (to 3.20 I believe)
I download and install the OTA and the phone restarts, but after restarts the phone's touchscreen does not work anymore.
I solved this for now by installing the 3.14RUU again, then it works again. But of course I would like to be able to install the OTA's
To me it sounds like a driver problem in the new version that prevents the touchscreen from working. Anyone have idea how to solve this?
I tried different boot.img after the OTA update but none of them solved the problem. Somebody here who has a good idea?
Xanion said:
I did a restore of my One-X to stock rom according to this tutorial.
http://design-extreme.net/restore-ht...-to-stock-rom/
This all went well and without problems. The RUU I flashed is this one.
RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Ra dio_5.1204.162.29_release_302015_signed
When I now startup the phone it all works perfect. Then the phone says there is an OTA (to 3.20 I believe)
I download and install the OTA and the phone restarts, but after restarts the phone's touchscreen does not work anymore.
I solved this for now by installing the 3.14RUU again, then it works again. But of course I would like to be able to install the OTA's
To me it sounds like a driver problem in the new version that prevents the touchscreen from working. Anyone have idea how to solve this?
I tried different boot.img after the OTA update but none of them solved the problem. Somebody here who has a good idea?
Click to expand...
Click to collapse
Kicking my own question. No-One who has an idea or thought? I've tried everything I could think off and would appreciate some fresh thoughts.
I have almost the same problem now. I was running CWM 10.2 with the TWRP recovery and reverted back to stock using a backup from this thread: http://forum.xda-developers.com/showthread.php?t=1975140
The installation went fine, but touch isn't working anymore. What could be wrong? I would like to have my phone back to stock and use the OTA from HTC.
I flashed Android Revolution HD to my HTC One M8 over the weekend (I was coming from Viperone). At first I was stuck in a bootloop so I tried to restore back to Viperone, but I had the same problem. I restored to rooted (stock) and was finally able to download and flash Android Revolution; however, no I can't get my wifi to turn on. I've tried wifi fixer and it hasn't helped.
I really like the look/feel of the ROM but I can't not have wifi.
Android version 4.3.3
Thanks!
For Sense 2.22 based ROMs (such as the current ARHD) its recommended to flash the updated firmware package. Broken WiFi is a known issue if you skip this step.
More info here: http://forum.xda-developers.com/showpost.php?p=54408500&postcount=9592
If you aren't comfortable with this, you can flash one of the older 1.5X based ROMs. Or GPE may be okay, as well.
I had exactly the same problem on many 4.4.3 roms. Only using stock kernel helped, but the boot time of a device was about 4min instead of matter of seconds.
Everything works great on skydragon rom (with their kernel).
Sent from HTC One m8, or maybe not anymore
Firmware
I tried updating the firmware over the weekend, after following the link provided by redpoint73 (http://forum.xda-developers.com/show...postcount=9592) I installed the new firmware 2.22.401.4, it went smoothly up to the point where i rebooted and my cell radio wouldn't connect.
I had to install the original firmware and then reinstall TWRP. I'm rooted with Android 4.4.2. What firmware do I use when updating so that my verizon radio isn't impacted.
Thanks!
Hi I pretty much know nothing about custom roms etc but I was forced to go for a custom ROM due to a friend wiping my phone but when I flashed Viper 3.2.1 everything was fine except the wifi button was greyed out, I also tried android revolution and the same problem occured. However it was fine when i tried candy5 but once i flashed google play the wifi stopped working again.
Does anyone know what the problem is and how i should fix it? thanks.
Hope you are on latest 4.4.4 firmware , link for the same should be in OP/FAQ of Viper.
fandam said:
Hi I pretty much know nothing about custom roms etc but I was forced to go for a custom ROM due to a friend wiping my phone but when I flashed Viper 3.2.1 everything was fine except the wifi button was greyed out, I also tried android revolution and the same problem occured. However it was fine when i tried candy5 but once i flashed google play the wifi stopped working again.
Does anyone know what the problem is and how i should fix it? thanks.
Click to expand...
Click to collapse
If you are only unlocked and not s-off you will need to manually flash the corresponding boot.img for each rom each time you flash a new rom. If you can get s-off you won't need to do this anymore.
Firmware needs to be updated. Confirmed on OP's other thread here: http://forum.xda-developers.com/htc-one-m8/help/htc-one-m8-bricked-t2989202/page2
Also its not necessary to manually extract and flash boot.img on the M8, even when s-on. Folks giving this advice may be carrying over knowledge from an older HTC device.