Hi
I bought a new Galaxy Nexus
There is a slight bulge on the region where there is battery on the back cover . Is it normal ? also there back cover is slight loose around the area of the camera .
Thanks for your answers .
Did you put the cover on correctly? No bulges if so.
bow chicka wow wow.
@rbiter said:
Did you put the cover on correctly? No bulges if so.
bow chicka wow wow.
Click to expand...
Click to collapse
+1 and you can push the cover slightly in at the bottom of the camera if that's what you mean.
I never noticed this before this moment but I have it too! GSM model.
Ya I have it to. I got rogers to replace it and it was a bit better, but its always gonna be a little loose around the camera
Sent from my Galaxy Nexus using Tapatalk
Thanks all.
Now I can understand that its normal that the cover is loose around the camera .
I put on the cover perfectly , why is it loose (1mm press) on the right side of the camera ?
Shall i buy the new cover ?
Thanks
gokpog said:
+1 and you can push the cover slightly in at the bottom of the camera if that's what you mean.
Click to expand...
Click to collapse
Yes exactly
Let us know if you manage to do this. I would be happy to test.
Sent from my Galaxy Nexus using Tapatalk
Related
is it just me or is it a general "problem" that the backcover is not really solid near the camera, when i press the backcover down a bit it crunches a bit
someboy else noticed ?
seems fine for me.. perhaps your back cover is not fully latched on in one spot?
Sent from my Galaxy Nexus using xda premium
im running the verizon extended battery and there is a slight give around the camera when i push
orphicone said:
im running the verizon extended battery and there is a slight give around the camera when i push
Click to expand...
Click to collapse
same here.
Take off the cover ans stick a piece of tape or paper or something in there.
hey guys i really like the gnex but the build quality isn't really good
the backcover crunches in the near of the camera
and today i experienced another quality issue after 10 days of using the phone really carefully the bottom of the phone clatters when i push
for such a expensive phone it's really disappointing
is it just me or somebody else noticed that
Just you. Mine is fine.
Sent from my Galaxy Nexus using xda premium
No problem with mine or my fiance's.
Sent from my Galaxy Nexus using xda premium
aras1 said:
hey guys i really like the gnex but the build quality isn't really good
the backcover crunches in the near of the camera
and today i experienced another quality issue after 10 days of using the phone really carefully the bottom of the phone clatters when i push
for such a expensive phone it's really disappointing
is it just me or somebody else noticed that
Click to expand...
Click to collapse
Yeah there is a soft spot below the camera where it slightly pushes in. I think it is because of the design of the back cover
Sent from my Galaxy Nexus using XDA App
Mines fine, though the back cover seems to be fairly flimsy, definitely will get a case.
Use a bit of tape
I also noticed there is some space under the batery cover around the camera. It produced annoying noices when making a call so I just put on some small strips of tape. Problem solved.
ploetietoe said:
I also noticed there is some space under the batery cover around the camera. It produced annoying noices when making a call so I just put on some small strips of tape. Problem solved.
Click to expand...
Click to collapse
Good idea. I will do the same.
i guess the gap is important to release the heat at the top part during data usage
after applying tape.. dont you have heat issues?
No heat problem
The space between the cover and the body is really small. A few single tape strips at the right place prevent the cover from moving. No heat problems at all.
wayneb02 said:
Yeah there is a soft spot below the camera where it slightly pushes in. I think it is because of the design of the back cover
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
Mine does this if I don't have the rear cover installed correctly. It still has a TINY amount of push, but less than a mm. You can't notice it unless you look really close to it while pushing.
cruxidex said:
i guess the gap is important to release the heat at the top part during data usage
after applying tape.. dont you have heat issues?
Click to expand...
Click to collapse
Good point, tape may become super-stuck-melted-on after a good round of video watching or game playing.
I've had to swap my Nexus for another one when my vibration motor started making weird noises. When my phone would vibrate, it would also come along with an annoying hum like a screw was loose or something.
Only had the phone for a week before that started happening.
I have the extended battery cover and it creaks really bad. My volume rocker is also loose and rattles. I am going to Verizon tomorrow to see if I can find a unit that is more solid.
Sent from my Verizon Galaxy Nexus using xda premium
Mine is solid as a rock. No creaking, no soft spots. I have a spare battery and swap it out once in a wile so I take the cover on and off a few times a week. It may just be that it's not sitting right.
Best way I have found is to start at the bottom work your way up one side then down the other. If any clips are missed or not sitting right it will feel cheap. Once they are all clipped properly, it's as solid as can be.
Sent from my Galaxy Nexus using xda premium
+ 1 to gnex build quality, not quite the heft of the n1 but it is as solid can be for a plastic phone.
Sent from my Galaxy Nexus using xda premium
I actually prefer the light weight plastic that samsung builds thier devices with. Look into a motorola or iphone if you want the battleship feel.
My post in this thread explains what that nose on the back cover is and how I fixed it on my phone.
http://forum.xda-developers.com/showthread.php?t=1399210
@rbiter said:
+ 1 to gnex build quality, not quite the heft of the n1 but it is as solid can be for a plastic phone.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I will admit.. this phone in the shell of a Nexus One.. mmmm.
aras1 said:
hey guys i really like the gnex but the build quality isn't really good
the backcover crunches in the near of the camera
and today i experienced another quality issue after 10 days of using the phone really carefully the bottom of the phone clatters when i push
for such a expensive phone it's really disappointing
is it just me or somebody else noticed that
Click to expand...
Click to collapse
I don't have any problems with mine at all, maybe try a different back cover? (Many on eBay) Also is your. Back cover on all the way?
Sent from my Galaxy Nexus using xda premium
I've been wondering about this since I got the phone.
The battery cover seems very much unftting with the camera, am I the only experiencing this? It kinda annoys me in the long run. If a "fix" is available I'd be happy to know!
Fsjadner.
Fsjadner said:
I've been wondering about this since I got the phone.
The battery cover seems very much unftting with the camera, am I the only experiencing this? It kinda annoys me in the long run. If a "fix" is available I'd be happy to know!
Fsjadner.
Click to expand...
Click to collapse
Mine is perfect and I haven't heard anyone else with this. Does it affect your pics?
I would bring it back if it does. Maybe a dodgy factory build.
Do you mean that the cover around the camera can be "pressed in"? If that's the case then that is a common thing. If you don't like it you can try sticking some folded piece of paper with sticky tape under the cover under that area.
Sent from my Galaxy Nexus using Tapatalk
Chrono_Tata said:
Do you mean that the cover around the camera can be "pressed in"? If that's the case then that is a common thing. If you don't like it you can try sticking some folded piece of paper with sticky tape under the cover under that area.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Good point I have that too. I thought he meant it was affecting pictures because some of the lens was covered.
I'm on my third phone and the second was like this. Drove me nuts. My third and first fit snug. I would take it back and ask for another cover to see if it is the cover or a phone problem. I used a heat gun on the cover to try and form it closer to the camera with a little success but wasn't perfect.
Sent from my Galaxy Nexus using XDA App
Chrono_Tata said:
Do you mean that the cover around the camera can be "pressed in"? If that's the case then that is a common thing. If you don't like it you can try sticking some folded piece of paper with sticky tape under the cover under that area.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Thanks. much better formulated, I was having a hard time trying to describe the situation.
It annoys me deeply, and I'll try with the folded paper.
Finally got around to doing this. I took a few pictures but had to use a old droid since I use my phone as a camera. Took 3 pictures, 2 being of the phone with the battery / case and 1 being a comparison to the case that comes with the zerolemon battery.
Here is a thread for the battery:
http://forum.xda-developers.com/showthread.php?t=2102546
Here is the otterbox I used: (I will be purchasing the orange / camo one next)
http://www.amazon.com/OtterBox-Defe...63124048&sr=8-1&keywords=otterbox+defender+s3
If you have any question fire away, but this is the best way to have AMAZING battery life and awesome protection for your phone.
Liptus said:
Finally got around to doing this. I took a few pictures but had to use a old droid since I use my phone as a camera. Took 3 pictures, 2 being of the phone with the battery / case and 1 being a comparison to the case that comes with the zerolemon battery.
Here is a thread for the battery:
http://forum.xda-developers.com/showthread.php?t=2102546
Here is the otterbox I used: (I will be purchasing the orange / camo one next)
http://www.amazon.com/OtterBox-Defe...63124048&sr=8-1&keywords=otterbox+defender+s3
If you have any question fire away, but this is the best way to have AMAZING battery life and awesome protection for your phone.
PS: For best results use this mod with:
http://forum.xda-developers.com/showthread.php?t=1766684
Click to expand...
Click to collapse
can you take a pic without the silicone case?
im guessing it goes into the holster fine screen in, but not screen out?
Is the battery getting hot after intensive use????
Sent from my SAMSUNG-SGH-I747 using xda premium
I'm going to try this. Is it as simple as cutting the outline of the battery? Got any tips?
Thanks
Sent from my SGH-T999 using xda app-developers app
Looks good.
Sent from my Galaxy S3 using neighbors wifi
burntrat said:
can you take a pic without the silicone case?
im guessing it goes into the holster fine screen in, but not screen out?
Click to expand...
Click to collapse
I threw the holster away the day I got it. I'll be picking up a new case in a day or so and I'll update it then.
ukcain said:
Is the battery getting hot after intensive use????
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
I used it for about and hour and a half heavily while in the car (bored) and it was fine.
thecrark said:
I'm going to try this. Is it as simple as cutting the outline of the battery? Got any tips?
Thanks
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I didn't have the right tips for the dremel so I had to use a grind stone, it looks incredibly sloppy but the rubber is so tight on it that I'm not worried about dust. I found the right tips after I was done (imagine that) so the case I do in a few days should look a lot better. No pointers really, you should be able to free hand it.
in addition to pics without the silicone cover, can you take pics with everyone on and show the back near the camera. wondering if theres a gap or something between the rubber and plastic. im glad you had the balls to do this. i didnt think it was possible.
burntrat said:
in addition to pics without the silicone cover, can you take pics with everyone on and show the back near the camera. wondering if theres a gap or something between the rubber and plastic. im glad you had the balls to do this. i didnt think it was possible.
Click to expand...
Click to collapse
I will show pics without the silicone but I'll update it later when I re do it with the right tool. I thought I posted a picture of the back. There is a gap but the battery seals tightly between the plastic and the silicone. There's definitely no chance of dust getting in but I'll add the picture once I'm home.
And yeah I was getting tired of not having a good case for my extended batteries.
burntrat said:
can you take a pic without the silicone case?
im guessing it goes into the holster fine screen in, but not screen out?
Click to expand...
Click to collapse
Here are more pictures for you: I charge my battery now every 5 days!! I also use it a LOT!
View attachment 1801112
View attachment 1801113
View attachment 1801114
View attachment 1801115
bobolinko said:
Here are more pictures for you: I charge my battery now every 5 days!! I also use it a LOT!
Click to expand...
Click to collapse
Lol he meant without the Otterbox's silicone. Thanks though.
burntrat said:
can you take a pic without the silicone case?
im guessing it goes into the holster fine screen in, but not screen out?
Click to expand...
Click to collapse
I just got my new case in the mail and I can confirm it will not go into the holster screen out, but it does fit fine screen in.
Liptus said:
I just got my new case in the mail and I can confirm it will not go into the holster screen out, but it does fit fine screen in.
Click to expand...
Click to collapse
ahhh...i kind of wanted to make the holster a car mount or something clipping onto the visor. oh well. thanks for the info.
cant wait to see ODM 2.0
burntrat said:
ahhh...i kind of wanted to make the holster a car mount or something clipping onto the visor. oh well. thanks for the info.
cant wait to see ODM 2.0
Click to expand...
Click to collapse
Odm? I'll have my ladies camera tomorrow so I'll have the new pictures up without the silicone.
Liptus said:
Odm? I'll have my ladies camera tomorrow so I'll have the new pictures up without the silicone.
Click to expand...
Click to collapse
Sorry, haha. Otterbox defender mod 2.0
Sent from my phone
Pics of the phone with battery an inner otterbox hard shell.. Dont care how pretty the cut was just wanna see how big the hole looks(Thats what i told her Lol).. Thinking bout doing this on my Note 2 since its pretty much an over grown s3.
sent from my Cricket Note 2
Did you ever get anymore pictures? I'm going to need to something like this soon.
Sent from my SCH-I535 using xda app-developers app
Worst thread ever.....where are the photos of the actual mod?
eddie3130 said:
Pics of the phone with battery an inner otterbox hard shell.. Dont care how pretty the cut was just wanna see how big the hole looks(Thats what i told her Lol).. Thinking bout doing this on my Note 2 since its pretty much an over grown s3.
sent from my Cricket Note 2
Click to expand...
Click to collapse
Added the picture.
FXVIZI said:
Did you ever get anymore pictures? I'm going to need to something like this soon.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I have been working 7 days a week, family and work come before xda ^^
appreciate the pics man even though you being busy and all
that looks like a precise cut, very nice. any tips on how to get it right the first time?
the only thing that bothers me is the gap between the hardshell and silicone on the back (right under the camera).
i dont really care about the looks, but worry about rain water or whatever getting inside quicker.
since the original back cover is removed, the back and internals are technically more exposed.
Hey man I just purchased this battery and think your idea is awesome. I'm surprised no one has asked exactly how you modded this to make it work. So you cut the hard plastic backing and the outer silicone? The 3rd pic in the OP doesn't look like the silicone was cut.
Sent from my SPH-L710 using xda premium
so after seeing the sveiw cover for the s4 i thought that would be cool for the galaxy nexus cause id use it cause i wanted a flip cover but one i canstill see the time and notifications so i took a old picture frame back and yes painters tape (gonna be tweaking it though ) and made this its a first draft of the one with the window the one i made with out the window looks really nice tho. so its felt on the inside and blue tape on the out side til i get double sidded tape or at least glue im stuck at home for now so yeah did with what i got lol anyway feedback is welcome if you have an idea let me know thanx
Alpha_wolf said:
so after seeing the sveiw cover for the s4 i thought that would be cool for the galaxy nexus cause id use it cause i wanted a flip cover but one i canstill see the time and notifications so i took a old picture frame back and yes painters tape (gonna be tweaking it though ) and made this its a first draft of the one with the window the one i made with out the window looks really nice tho. so its felt on the inside and blue tape on the out side til i get double sidded tape or at least glue im stuck at home for now so yeah did with what i got lol anyway feedback is welcome if you have an idea let me know thanx
Click to expand...
Click to collapse
Very creative to say the least lol but maybe some paint and stencil it to make it look better?
NexusS4gFreak said:
Very creative to say the least lol but maybe some paint and stencil it to make it look better?
Click to expand...
Click to collapse
i scraped that one ima make a new one when i better stuff lol instead i went with a plain flip cover felt on both sides and stitched along the ends for a cleaner look ill get better when i have new material given i used a 20 yr old picture frame back broad my father was throwing out and i was bored as hell given i have insomnia so yeah
The enticing factor about the s-view cover to me is it turns on the devices screen when the cover is removed and then switches it off when you close it. Without being able to emulate that functionality, the effort just doesn't seem worth it to me.
Sent from my Galaxy Nexus using xda premium
msavic6 said:
The enticing factor about the s-view cover to me is it turns on the devices screen when the cover is removed and then switches it off when you close it. Without being able to emulate that functionality, the effort just doesn't seem worth it to me.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
oh i had that i used the proximity sensor in the front so when i flip the cover open my screen kicks on i was gonna try the magnet sensor but just setting the phone on my computer triggered it so.
msavic6 said:
The enticing factor about the s-view cover to me is it turns on the devices screen when the cover is removed and then switches it off when you close it. Without being able to emulate that functionality, the effort just doesn't seem worth it to me.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
All you have to do is use this:
https://play.google.com/store/apps/details?id=com.dragonnis.intellicover&hl=en
jsgraphicart said:
All you have to do is use this:
https://play.google.com/store/apps/details?id=com.dragonnis.intellicover&hl=en
Click to expand...
Click to collapse
oh i used secure settings and tasker lol