Related
Hey guys...got the PhantomSkin Chromatic kit in the mail today and decided to install it this morning. The package was very impressive. Included was the Chromatic kit and 2 free screen savers. I was currently using the black OEM gel case with the dinky screen protector. I first put on the screen protector follwing the instructions given. The install was a breeze! Coming from a ZAGG shield, I was very impressed with this screen protector. The screen was clear with little to minimal orange peel! I then started with the Chromatic Install. The battery cover went on smooth. The next thing I did was the camera part. I noticed even though I was pressing down hard and hitting it with the dryer, the sides would pop up! The MT4G has alot of rounded corners so this really concerned me. I went ahead with the bottom part and the sides. Nothing was holding, I dont know if it was the weather or what...I started peeling it off to return the product but decided to look read up here alittle bit. Thanks to member "methodz" who installed this also, I found a new way to install it. I just put on piece by piece, but instead of using the dryer, he recommended a lighter!!! After hearing this, the install was cake..everything stuck on like a glove. I dont recommend this product unless you have the black version as there are many gaps! I love the CF look and it feels great, I am going to keep this setup and match it with the OEM holster till a Otterbox series comes out. Sorry for the big pics, but I wanted everyone to see the detail and the gaps. Hope this helps anybody who was thinking of installing this kit! On to the pics!!!
-Merwin
FYI: I aligned the battery cover after these pictures were taken.
SET #2
Man that looks good.Also looks like a lot of work to get perfectly lined up and stuck down.How much was that?
I'm gonna make out resident screen protector application expert put mine on! It should be here soon
Sent from my HTC Glacier using XDA App
the back of my phone looks like that, but i didn't use the side pieces, just the 3 main pieces on the back.
That looks really good, but I don't think I'd have the patience to line all those pieces up perfectly. What's it going to be like when/if you ever decide to remove them off the phone?
I checked out that site after getting my MT4G, and can't you choose what design you want for your phone? It didn't even show a picture of what it would look like after selecting the one for the MT4G.
Nice photos BTW!
sykokiller said:
Man that looks good.Also looks like a lot of work to get perfectly lined up and stuck down.How much was that?
Click to expand...
Click to collapse
It looks difficult but really easy. It was easy to align. The kit cost $29.99 but there is a 30% off coupon on their site. You get the Chromatic kit plus two free screen protectors for $20.96 shipped to your door!
ESKIMOn00b said:
I'm gonna make out resident screen protector application expert put mine on! It should be here soon
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
HAHAHAH! This my first time! Tell you what..you root my phone and I'll lay this down for you LOL!
methodz said:
the back of my phone looks like that, but i didn't use the side pieces, just the 3 main pieces on the back.
Click to expand...
Click to collapse
Looks good methodz! Your lighter post saved me!
dustrho said:
That looks really good, but I don't think I'd have the patience to line all those pieces up perfectly. What's it going to be like when/if you ever decide to remove them off the phone?
I checked out that site after getting my MT4G, and can't you choose what design you want for your phone? It didn't even show a picture of what it would look like after selecting the one for the MT4G.
Nice photos BTW!
Click to expand...
Click to collapse
Thanks! I used by DSLR and bounced the flash so you can get an idea of the CF pattern and tried to get as much detail as possible. The install was easy bro! Also I peeled off some of the stuff i slightly heated and it came off without residue!
Looks good, but it would concern me that the silver bezel is still exposed to possible scratching/damage in the event of a drop. Is there any way to protect that with a skinz type of system like this?
Also, you were able to peel off some without residue, but does anyone have experience trying to get this kind of thing off after a few months?
How exactly to use the lighter???
I am unpacking now...
QUEDRO said:
How exactly to use the lighter???
I am unpacking now...
Click to expand...
Click to collapse
Just get close to the parts that arent sticking well and run it back and forth maybe like 3 timess to give it a little heat. Dont let the flame touch the CF. Get your thumb afterwards and stroke it into place LOL! GL on the install!
Geezz....I already messed up the screen shield.....DUNNO this instruction says soap, but id doesn't workout....
I see kinda wave-y pattern....is it normal?
Ain't for me this job...I'm pissed now
PS: redid it, look ok now, not perfect job though......Scared to apply the CF skin.
yes, this phone has a lot curve, Even Zagg was hard to put on the phone. but I manage to get zagg stick in to the phone now.
If it doesn't work, I can send it back for replacement. I hope you guy can send your Phantom skinz back too if you mess it up.
QUEDRO said:
How exactly to use the lighter???
I am unpacking now...
Click to expand...
Click to collapse
haha, i guess i'm daring... i stuck the skin on first and lit the actual CF areas. just don't light it for too long or you can damage something, just a split second or a few passes. you will find some of the skin doesn't stick too well if it is cold out so you will have to heat it. the instructions say use a blow dryer but i used a lighter instead.
I did it! And actually I am very impressed with my results on CF skin! Was easy and trick with the lighter worked fantastic! Very pleased! Looks and feels great!
Thank you guyz!
Looks nice! I would warn people you will feel the edges of the skin when you hold the phone. I used that on an iPhone and removed it after getting tired of feeling the edges of the skin.
Lakeshow423 said:
HAHAHAH! This my first time! Tell you what..you root my phone and I'll lay this down for you LOL!
Click to expand...
Click to collapse
thats kinda how it works out... i work at radioshack and im the one resident geek... i root all the phones, hack wii's, xbox, ps3... one of the guys is really good at applying screen protectors and such. when mine gets here i'll take it to him and have him put it on... then im sure we'll go use that lighter for something else...
SugarMouth said:
Looks nice! I would warn people you will feel the edges of the skin when you hold the phone. I used that on an iPhone and removed it after getting tired of feeling the edges of the skin.
Click to expand...
Click to collapse
Neah, I barely feel anything. It really depends, I guess, on the shape of the phone. Maybe iPhone is not well suited for this, but mine feels smooth and nice.
I warmed up really well the edges with the lighter when I applied the skin, so it set tight.
QUEDRO said:
Geezz....I already messed up the screen shield.....DUNNO this instruction says soap, but id doesn't workout....
I see kinda wave-y pattern....is it normal?
Ain't for me this job...I'm pissed now
PS: redid it, look ok now, not perfect job though......Scared to apply the CF skin.
Click to expand...
Click to collapse
Just a note for others: the screen protector will show artifacts and other random blobs that may look like smudges when its fresh. This should go away within 48 hours as it completely dries. Just relax and be patient, the world wasn't built in a day.
AFAIK all of these types of protectors (zagg, bse, ps)recommend putting the phone down for 24hrs after application.... to ensure it sticks, and to allow the solution to dry
Sent from my HTC Glacier using XDA App
As soon as you squeeze out most of the water it will work fine for usage. At least with the phantom skinz.
Sent from my HTC Glacier using XDA App
Genuine Samsung S3 Cover / Case Part No - EFC-1G6FBECSTD
Youtube Link
As always any feedback is more than welcome
Good point someone just made, you can't see the LED for notifications.
Not a major thing for me but it maybe for some people.
It also makes using the camera a bit of a pain. Useful for proping up the phone though.
Shug69 said:
It also makes using the camera a bit of a pain. Useful for proping up the phone though.
Click to expand...
Click to collapse
Yeah I agree. Not my kind of case tbf but as it's a genuine product I thought I'd review it. My favorite case so far is a case from tech21
Sent from my GT-I9300 using XDA
Like the fit, but blocking the led and awkward way you'd have to use camera make it a no go.
great review though.
onmike said:
Like the fit, but blocking the led and awkward way you'd have to use camera make it a no go.
great review though.
Click to expand...
Click to collapse
Cheers. Too many downsides to make it the case for me but they are very popular with S3 owners.
Sent from my GT-I9300 using XDA
Cost too much and doesn't hold anything else.
ReggieTee said:
Cost too much and doesn't hold anything else.
Click to expand...
Click to collapse
I don't mind the not holding anything side of things but they are expensive. You can tell it is a very high quality case though.
Sent from my GT-I9300 using XDA
Those of you moaning about the led being covered just leave the cover open when on a desk!
As for the video, the screen turns off when your on a call anyway......
Sent from my GT-I9300 using Tapatalk 2
Lennyuk said:
Those of you moaning about the led being covered just leave the cover open when on a desk!
As for the video, the screen turns off when your on a call anyway......
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Yeah I'm aware the proximity sensor turns the screen off when it's by the side of your face but I thought it was worth pointing out it still works with the case.
Sent from my GT-I9300 using XDA
Hello everyone,
I'm using the flip cover on my S3 and is exactly what i wanted. The only problem is the led being covered, so, i used a tool that i have to make holes on belts to make one on the cover and now is perfect for me.
See the pic below. The cover is very hard, i had to make a lot of "force" to make the hole.
ClyssaN said:
Hello everyone,
I'm using the flip cover on my S3 and is exactly what i wanted. The only problem is the led being covered, so, i used a tool that i have to make holes on belts to make one on the cover and now is perfect for me.
See the pic below. The cover is very hard, i had to make a lot of "force" to make the hole.
Click to expand...
Click to collapse
Looks like a good job. Nice work. I'm surprised Samsung didn't put the hole there in the first place
Sent from my GT-I9300 using XDA
ClyssaN said:
Hello everyone,
See the pic below. The cover is very hard, i had to make a lot of "force" to make the hole.
Click to expand...
Click to collapse
i hope samsung will use that idea in it's further flip cases...
pm007 said:
i hope samsung will use that idea in it's further flip cases...
Click to expand...
Click to collapse
I doubt they will but I think it would increase sales as a lot of people have pointed out the issue. I can't see how they can solve the issue of using the camera though.
Can someone that owns this case answer me this;
Is this cover protective for the screen in a case of a fall? I mean does it "lock" in place over the screen? If you turn it upside down for example, the flip opens?
I believe its the most basic thing that should be answered (if it does not protect the screen its useless) and no one in any review does this simple test.
palamosteliaro said:
Can someone that owns this case answer me this;
Is this cover protective for the screen in a case of a fall? I mean does it "lock" in place over the screen? If you turn it upside down for example, the flip opens?
I believe its the most basic thing that should be answered (if it does not protect the screen its useless) and no one in any review does this simple test.
Click to expand...
Click to collapse
Sorry I thought it was clear, no it doesn't lock to the screen so it dropped it could easily flap open.
ive pre ordered the case as its not out in australia yet, i should be getting it next week. never really thought about the camera and stuff until you guys mentioned it. ive used pu leather flip cases before and havnt really found it a problem. hopefully ill enjoy it as much i planned to. i love the looks and quality of the case, ive paid $39 aus for this product. cant wait..
ClyssaN said:
Hello everyone,
I'm using the flip cover on my S3 and is exactly what i wanted. The only problem is the led being covered, so, i used a tool that i have to make holes on belts to make one on the cover and now is perfect for me.
See the pic below. The cover is very hard, i had to make a lot of "force" to make the hole.
Click to expand...
Click to collapse
I have the said tool, I may attempt the same
As2O said:
ive pre ordered the case as its not out in australia yet, i should be getting it next week. never really thought about the camera and stuff until you guys mentioned it. ive used pu leather flip cases before and havnt really found it a problem. hopefully ill enjoy it as much i planned to. i love the looks and quality of the case, ive paid $39 aus for this product. cant wait..
Click to expand...
Click to collapse
I'm sure you'll love it. I always end up buying a few cases for my phones and cameras anyway lol
Sent from my GT-I9300 using xda app-developers app
I got one of these a couple of weeks back for my device. I found it was rather annoying having to hold it at an awkward angle when on the phone. I wish they'd made it flip up or down instead of to the side. It also means you can't hold it very well with your left hand either, as it adds even more width on to the device!
I've switched to a skin thingy now instead, even though it leaves the screen open to damage. I'm still looking to get some kind of plastic cover I can use with the skin I've got though.
I wanted to use my draco metal bumper with my 4200 Hyperion so I modded my battery cover. It's a work in progress. Ill post picks of it sanded and smoothed out later on.
Sent from my SCH-I535 using xda app-developers app
Thanks for the pics
Sent from my SPH-L710 using xda premium
Erm..... Isn't that going to look... well, erm..... pants?
You're just attaching an additional battery on to the back of your phone right? I don't get it.
Are you away from a plug socket/outlet for more than 12hrs at a time?
struction pDisra
Sorry mate that look hideous if I'm completely honest.
rofl
baileyjr said:
Sorry mate that look hideous if I'm completely honest.
Click to expand...
Click to collapse
agreed.
you are nowhere near a point where you should be showing off. get at least some semblance of a finished product, then come back.
doing a mod that allows you to keep a stylistic part (the draco) by making the device look like something scrounged from junk, is silly. and that is where it is as of now.
Is that ceiling tile?
chrischoi said:
Is that ceiling tile?
Click to expand...
Click to collapse
I think it is modelling parts: sheets of modelling plastic, glued together with modelling putty.. and then not bothered to be sanded down, or anything.
scarrmrcc said:
I think it is modelling parts: sheets of modelling plastic, glued together with modelling putty.. and then not bothered to be sanded down, or anything.
Click to expand...
Click to collapse
3D printers. Must have.
Yeah I didn't finish it. I'm using the plastic welding method. Once I sand it down it'll have a rounded edge and it'll be buttery smooth
Sent from my SCH-I535 using xda app-developers app
scarrmrcc said:
agreed.
you are nowhere near a point where you should be showing off. get at least some semblance of a finished product, then come back.
doing a mod that allows you to keep a stylistic part (the draco) by making the device look like something scrounged from junk, is silly. and that is where it is as of now.
Click to expand...
Click to collapse
I'm not showing off. If you go through these threads just to bash on people, its not appreciated. If you actually read it. I wrote "WORK IN PROGRESS" and im pretty sure once i finish dremeling it and sanding it with rounded edges it'll look decent enough.
I just finished sanding. Can anybody give me any suggestions on how to make the corners cleaner? Is silicone a good option? I can't sand it down anymore or I would go through the plastic since I used a thin one to use NFC
Sent from my SCH-I535 using xda app-developers app
That doesn't look so good... Work on aesthetics
Sent from my GT-I9300 using Tapatalk 2
jsrattey said:
That doesn't look so good... Work on aesthetics
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Only option to make it look nicer that comes to mind is using a red vinyl decal. Ill try it if all else fails...
Sorry, but I don't get why you're doing this.
As per my previous post, are you away from mains power for more than 12 hours at a time?
Hey dude, get some automotive body filler. Should clean it up nicely. Model car putty should work too but i think the automotive filler will hold up better to getting hit. . Tape off the area you dont want to get the stuff on, Lay it on, than sand it, than id suggest spray painting the stuff to protect it, than it will look good.
Do a search on model car putty to get an idea of what it does.
random google image
Mubble said:
Sorry, but I don't get why you're doing this.
As per my previous post, are you away from mains power for more than 12 hours at a time?
Click to expand...
Click to collapse
Work and School 10am-11pm and I just play on my phone alllll day.
hypertek said:
Hey dude, get some automotive body filler. Should clean it up nicely. Model car putty should work too but i think the automotive filler will hold up better to getting hit. . Tape off the area you dont want to get the stuff on, Lay it on, than sand it, than id suggest spray painting the stuff to protect it, than it will look good.
Do a search on model car putty to get an idea of what it does.
random google image
Click to expand...
Click to collapse
Thanks, hopefully this works out because i was thinking about silicone and this looks like a better option.
spraying it with white truck bed liner would probably be decent too, figure it would add some durability to it
This us what you need the seidio back for a extended battery.
Sent from my SAMSUNG-SGH-I747 using xda premium
sigh....
i think buy a battery with extended battery cover is easier...
this is not goign to be looking good when finished...
Finally got around to doing this. I took a few pictures but had to use a old droid since I use my phone as a camera. Took 3 pictures, 2 being of the phone with the battery / case and 1 being a comparison to the case that comes with the zerolemon battery.
Here is a thread for the battery:
http://forum.xda-developers.com/showthread.php?t=2102546
Here is the otterbox I used: (I will be purchasing the orange / camo one next)
http://www.amazon.com/OtterBox-Defe...63124048&sr=8-1&keywords=otterbox+defender+s3
If you have any question fire away, but this is the best way to have AMAZING battery life and awesome protection for your phone.
Liptus said:
Finally got around to doing this. I took a few pictures but had to use a old droid since I use my phone as a camera. Took 3 pictures, 2 being of the phone with the battery / case and 1 being a comparison to the case that comes with the zerolemon battery.
Here is a thread for the battery:
http://forum.xda-developers.com/showthread.php?t=2102546
Here is the otterbox I used: (I will be purchasing the orange / camo one next)
http://www.amazon.com/OtterBox-Defe...63124048&sr=8-1&keywords=otterbox+defender+s3
If you have any question fire away, but this is the best way to have AMAZING battery life and awesome protection for your phone.
PS: For best results use this mod with:
http://forum.xda-developers.com/showthread.php?t=1766684
Click to expand...
Click to collapse
can you take a pic without the silicone case?
im guessing it goes into the holster fine screen in, but not screen out?
Is the battery getting hot after intensive use????
Sent from my SAMSUNG-SGH-I747 using xda premium
I'm going to try this. Is it as simple as cutting the outline of the battery? Got any tips?
Thanks
Sent from my SGH-T999 using xda app-developers app
Looks good.
Sent from my Galaxy S3 using neighbors wifi
burntrat said:
can you take a pic without the silicone case?
im guessing it goes into the holster fine screen in, but not screen out?
Click to expand...
Click to collapse
I threw the holster away the day I got it. I'll be picking up a new case in a day or so and I'll update it then.
ukcain said:
Is the battery getting hot after intensive use????
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
I used it for about and hour and a half heavily while in the car (bored) and it was fine.
thecrark said:
I'm going to try this. Is it as simple as cutting the outline of the battery? Got any tips?
Thanks
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I didn't have the right tips for the dremel so I had to use a grind stone, it looks incredibly sloppy but the rubber is so tight on it that I'm not worried about dust. I found the right tips after I was done (imagine that) so the case I do in a few days should look a lot better. No pointers really, you should be able to free hand it.
in addition to pics without the silicone cover, can you take pics with everyone on and show the back near the camera. wondering if theres a gap or something between the rubber and plastic. im glad you had the balls to do this. i didnt think it was possible.
burntrat said:
in addition to pics without the silicone cover, can you take pics with everyone on and show the back near the camera. wondering if theres a gap or something between the rubber and plastic. im glad you had the balls to do this. i didnt think it was possible.
Click to expand...
Click to collapse
I will show pics without the silicone but I'll update it later when I re do it with the right tool. I thought I posted a picture of the back. There is a gap but the battery seals tightly between the plastic and the silicone. There's definitely no chance of dust getting in but I'll add the picture once I'm home.
And yeah I was getting tired of not having a good case for my extended batteries.
burntrat said:
can you take a pic without the silicone case?
im guessing it goes into the holster fine screen in, but not screen out?
Click to expand...
Click to collapse
Here are more pictures for you: I charge my battery now every 5 days!! I also use it a LOT!
View attachment 1801112
View attachment 1801113
View attachment 1801114
View attachment 1801115
bobolinko said:
Here are more pictures for you: I charge my battery now every 5 days!! I also use it a LOT!
Click to expand...
Click to collapse
Lol he meant without the Otterbox's silicone. Thanks though.
burntrat said:
can you take a pic without the silicone case?
im guessing it goes into the holster fine screen in, but not screen out?
Click to expand...
Click to collapse
I just got my new case in the mail and I can confirm it will not go into the holster screen out, but it does fit fine screen in.
Liptus said:
I just got my new case in the mail and I can confirm it will not go into the holster screen out, but it does fit fine screen in.
Click to expand...
Click to collapse
ahhh...i kind of wanted to make the holster a car mount or something clipping onto the visor. oh well. thanks for the info.
cant wait to see ODM 2.0
burntrat said:
ahhh...i kind of wanted to make the holster a car mount or something clipping onto the visor. oh well. thanks for the info.
cant wait to see ODM 2.0
Click to expand...
Click to collapse
Odm? I'll have my ladies camera tomorrow so I'll have the new pictures up without the silicone.
Liptus said:
Odm? I'll have my ladies camera tomorrow so I'll have the new pictures up without the silicone.
Click to expand...
Click to collapse
Sorry, haha. Otterbox defender mod 2.0
Sent from my phone
Pics of the phone with battery an inner otterbox hard shell.. Dont care how pretty the cut was just wanna see how big the hole looks(Thats what i told her Lol).. Thinking bout doing this on my Note 2 since its pretty much an over grown s3.
sent from my Cricket Note 2
Did you ever get anymore pictures? I'm going to need to something like this soon.
Sent from my SCH-I535 using xda app-developers app
Worst thread ever.....where are the photos of the actual mod?
eddie3130 said:
Pics of the phone with battery an inner otterbox hard shell.. Dont care how pretty the cut was just wanna see how big the hole looks(Thats what i told her Lol).. Thinking bout doing this on my Note 2 since its pretty much an over grown s3.
sent from my Cricket Note 2
Click to expand...
Click to collapse
Added the picture.
FXVIZI said:
Did you ever get anymore pictures? I'm going to need to something like this soon.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I have been working 7 days a week, family and work come before xda ^^
appreciate the pics man even though you being busy and all
that looks like a precise cut, very nice. any tips on how to get it right the first time?
the only thing that bothers me is the gap between the hardshell and silicone on the back (right under the camera).
i dont really care about the looks, but worry about rain water or whatever getting inside quicker.
since the original back cover is removed, the back and internals are technically more exposed.
Hey man I just purchased this battery and think your idea is awesome. I'm surprised no one has asked exactly how you modded this to make it work. So you cut the hard plastic backing and the outer silicone? The 3rd pic in the OP doesn't look like the silicone was cut.
Sent from my SPH-L710 using xda premium
Got my nexus today and the official quick cover I ordered came with it too, even though the order indicated part dispatch. I had assumed this meant the case had been delayed.
Have to say it is a very nice case, feels great, nice snug fit and it is really thin. While it is still bedding in the front flap is lifting slightly when closed (see pic) but I am sure this will give a bit in the next few day's.
Not worth £35!!!!! But it is a nice case. If the spigen one is as nicely made (seem to be looking at pics and reviews) then it will make them a bargain
Nice, but I REALLY miss the Nexus sign from the back...
Sent from my Nexus 7 using xda app-developers app
Hey there, quick question:
The Notification light is not visible with this front, right?
kentobi said:
Hey there, quick question:
The Notification light is not visible with this front, right?
Click to expand...
Click to collapse
Yes, correct. Notification light is obscured by cover.
LG/Google case design = FAIL
Time to get out the drill or hole punch, shall I take the phone out of the case before I begin drilling?
haha, there aren't many pictures with a broken screen yet so do it! ;p
where did you get the quick cover? Play store?
bassie90 said:
haha, there aren't many pictures with a broken screen yet so do it! ;p
where did you get the quick cover? Play store?
Click to expand...
Click to collapse
Yes, play store.
Was in new gadget blindness mode and didn't really think about the cost, at £35 it is a bit too much.
I reckon at that price the hole punch cut out for the notification light should go for about £4 on eBay
bisto321 said:
Yes, correct. Notification light is obscured by cover.
LG/Google case design = FAIL
Time to get out the drill or hole punch, shall I take the phone out of the case before I begin drilling?
Click to expand...
Click to collapse
Well all the pics show a hole for the notification light. If there is no hole for your camera also, then you have it installed upside down
Sent from my GT-N7000 using XDA Premium 4 mobile app
akenis said:
Well all the pics show a hole for the notification light. If there is no hole for your camera also, then you have it installed upside down
Sent from my GT-N7000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You had me going there for a moment - I had to reach all the way past my keyboard at work to test your theory.
Phew, I am not an idiot after all, although most of my daily actions would prove otherwise, LGoogle have forgotten to poke a hole in their case!
I will have to ring them and see if they can mail me a hole upgrade? If the makers of polo mints can remember to put holes in their products, I don't see why LGoogle can't
What do you think Google will charge me for postage on a hole?
I really like it but to bad the nexus logo on the back is lost
Id love to get this but losing the nexus logo is a no go for me. I think ill just buy a real bumper.
Does that mean that the front flap isn't magnetized? I'd heard it was and that when you open it, it unlocks your screen.
Sent from my Nexus 5 using Tapatalk
I have the case as well myself. The flap IS magnetised. The magnet is actually located above the volume buttons, so that when closed the magnet touches the screen glass over the volume buttons.
And I agree, while the case is nice, it definitely isn't worth £35, more like £15 and that's pushing it.
Sent from my Nexus 5 using Tapatalk
Ok...how did you guys get the case? When I look in the Google Play store, it says "coming soon". I'm in Canada (eh?) and never have any issue purchasing other stuff. I got the white Nexus 5 and thought the white flipcase would look SIC!!!
I received my Quick Cover with my Nexus 5 on Monday. First time I have used a case like this and I must say I am impressed. It feels premium (perhaps not £35 premium) and does not add as much bulk to the phone as I expected.
I for one am glad it has no notification light hole as the light used to wake me in the night on my bedside table.
One question to any other owners, is the rear too thick for wireless charging to work?
Sent from my Nexus 5 using Tapatalk
monkfish_lad said:
I received my Quick Cover with my Nexus 5 on Monday. First time I have used a case like this and I must say I am impressed. It feels premium (perhaps not £35 premium) and does not add as much bulk to the phone as I expected.
I for one am glad it has no notification light hole as the light used to wake me in the night on my bedside table.
One question to any other owners, is the rear too thick for wireless charging to work?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Pretty sure wireless charging is fine with this case, think I read it somewhere?
I am sure LGoogle wouldn't overlook this, especially considering they are releasing a charger for the nexus devices too.
can6rxw said:
Ok...how did you guys get the case?
Click to expand...
Click to collapse
We were the lucky few that were able to grab one at launch, they ran out pretty quick though
akenis said:
Well all the pics show a hole for the notification light. If there is no hole for your camera also, then you have it installed upside down
Sent from my GT-N7000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The hole in the picture is at the top for the earpiece so you can talk on the phone with the cover closed...
What happens if the flap is closed, you receive an incoming call and open the flap? Does that automatically answer the call? What happens to a call when you close the flap?
Thanks for your feedback.
Toby
- via Android -
tklr said:
What happens if the flip is closed, you receive an incoming call and open the flip? Does that automatically answer the call? What happens to a call when you close the flip?
Thanks for your feedback.
Toby
- via Android -
Click to expand...
Click to collapse
Opening the flip just turns on the screen. All it does is it saves your pressing the power button. You still have to swipe to unlock if you have it turned on, still have to enter your unlock code etc. When there's an incoming call, after opening the flip you still have to swipe to answer/reject/silence the call. And closing the flip doesn't end calls either, it just turns off the display, or the speaker hole on the flip would be pointless.
bisto321 said:
We were the lucky few that were able to grab one at launch, they ran out pretty quick though
Click to expand...
Click to collapse
Musta been very few...I was on this like a hen on a junebug....but alas...no case. Good for you though :good: