Got my 900 Yesterday and realized his morning that the charge cable had popped out overnight. Upon inspection I discovered that the shape of the hole in the Silicone cover I received (AT&T is giving away $100 of accessories in Illinois on top of everything else, WOOT!) is not the same as the shape of the micro-USB cable that came with the phone. I thought it was a genuine Nokia case, I don't have the box because the were kind enough to dispose of it.
I'm curious if anyone else has run into this? The charge cable is fairly oval shaped while the hole in the case is more of a basic trapezoid /__\.
Has anyone else run into this or do your hole and cable shape match up, if so are you matched oval or trapezoid?
you know my car charger won't fit and I have a Samsung Micro-USB cable that I use to plug it into my computer and that one is super lose. But then I use some third party no name micro-USB cable that I use to charge and that one fits perfectly fine. Have you tried the actual cable that came with the phone? Usually those Nokia cables are high quality.
Yeah, it's the stock cable that came with the phone that won't fit. It's quite secure without the case on, but pops off when using the case due to the difference in hole shape.
If Nokia would have centered the usb port it would be less an issue. Very annoying to me as well so I took the dremel to the case. The case is so tight I don't want to have to remove it constantly.
Yeah, I noted this in my review of the L900. I am tempted to carve out part of the gel case, but it would probably be noticeable from the front of the phone. They should have centered the micro-USB socket on the top of the phone.
The one thing I miss from my Surround is the indicator light. Not for missed calls (I don't get many). But liked knowing the phone was charging/charged. Now I have to power on to be sure the cable didn't move.
Sent from my Lumia 900 using Board Express
The rocketfish micro USB data cable will for sure work and latch on and some other rocketfish micro USB products (such as the car charger). I had the same problem with all my existing micro USB cables and I stopped by best buy and plugged in all of their micro USB cables into my phone with the gel case to see which ones would work.
I have that exact same case and all USB cables I have tried fit perfectly. Not sure why you're having this problem...
Nissan350 said:
I have that exact same case and all USB cables I have tried fit perfectly. Not sure why you're having this problem...
Click to expand...
Click to collapse
Some of the cases have square cut out and some are oval in the same packaging.
cx1 said:
Some of the cases have square cut out and some are oval in the same packaging.
Click to expand...
Click to collapse
Mine is oval, and while the plug goes in fine it does not seat flat to the phone. So it's up 1/16" and that could be enough for ot to wobble out if you touch the phone while charging.
I walk around the house with a short 8" USB cable and portable USB charger. Nokia has popped out a few times. Surround never did.
Sent from my Lumia 900 using Board Express
Ditto here. Same problem. USB stays secured enough though. I have a Samsung USB that's a little thinner and fits better more secure. Not completely a nuisance though.
Related
i have some micro usb plugs and for some reason they dont fit all the way into the usb port on my captivate and keep falling out....anyone know where to get car chargers that fit all the way in? most plugs have to thick of a plastic and wont go all the way into the port....the one that came with the captivate has thin plastic around the plug itself..
Take a sharp blade and trim some of the plastic off at a 45 degree angle, worked for me.
one028 said:
i have some micro usb plugs and for some reason they dont fit all the way into the usb port on my captivate and keep falling out....anyone know where to get car chargers that fit all the way in? most plugs have to thick of a plastic and wont go all the way into the port....the one that came with the captivate has thin plastic around the plug itself..
Click to expand...
Click to collapse
I bought the Motorola car charger from ebay for like seven bucks and it fits perfect and is really long. I use a Nokia cable for charging at home and my Samsung cable stays in my travel bag since I'm on the road about three or four days a week. All fis excellent.
I ordered a car charger for like six bucks and usb cable for approx 4 bucks from amazon. Both were original Samsung products and the ends are shaped just like the cable that came with the phone, fits perfect. Just search for Samsung car charger andSamsung usb cable on amazon, if you haven't found an alternate solution.
Sent from my SAMSUNG-SGH-I897 using XDA App
one028 said:
i have some micro usb plugs and for some reason they dont fit all the way into the usb port on my captivate and keep falling out....anyone know where to get car chargers that fit all the way in? most plugs have to thick of a plastic and wont go all the way into the port....the one that came with the captivate has thin plastic around the plug itself..
Click to expand...
Click to collapse
Before you go out and buy a new cord, are you sure that you are opening the hatch all the way? My wife thought that no cords fit and kept falling out until I showed her that you have to slide the USB open until it clicks.
Is it that hard to figure this out? Sand paper or a sharp knife can shave away the plastic on the cable. The side that faces the back of the phone is where they interfere just bevel it a bit and you are all good. forget the stock over priced stuff, I get my cables at the dollar store.
Sent from my SAMSUNG-SGH-I897
Out of the 4+ charging stations I have laid out at home/work, each one has had the MicroUSB plug modified with a razor blade. Takes all of 10 seconds to hack off a little rubber, and then you're all set.
I've had the same issue. Most chargers wont fit. I think the USB on the phone is recessed a little too much for most chargers. Do what everyone else says and hack a little of that rubber off so it fits!
Sent from my SAMSUNG-SGH-I897 using XDA App
I use my old Moto Q wall charger at home, and the stock cord for connecting to my desktop. At work I use the USB cable from my old Moto Q and the stock plug part for charging at work and connecting to my laptop. I got my bases covered. ;-)
Sent from anywhere via XDA app
I bought a charger at Walgreens at all places.. it was 14 bucks and I didn't need to cut anything
I bought Motorola mini to micro usb adapters and they fit just fine. Seems like Motorola OEM stuff is small enough by my experience and other's above. I had tons of mini sized chargers for my GPS, camera, and Blackberry so the adapters have allowed me to keep using them. I bought a pack of 5 for less than $20 on Amazon.
Do any of you guys and gals know of an aftermarket cable that will work with the captivate. I lost the original one that came with the phone. Have since bought two different chargers, one from the att store (zero charger), and they charge the phone but don't put it on USB mode like the original one did when I plug it to a laptop.
Sent from my rooted Cappy.
All you need is a standard MicroUSB to USB cable. Make sure it's a standard cable, and not a "charge only" cable though.
A bit of advise, generally if you buy a cable that isn't a Samsung USB cable, you're going to have to take a razor blade to your new cable and cut away some of the rubber around the MicroUSB plug. You'll see that untrimmed, you might have a hard time getting the cable secured in the phone's port.
Thanks man. I actually just noticed the "charging only cable" written on the tag on the cable. Now I know what to look for. And you're right, the one I bought from a gas station was always popping out. The one from att fits like a glove though.
Sent from my rooted Cappy.
All it takes is a razor blade or something similar, and a few seconds. I use a bunch of generic USB cables which all have fat plug heads. Trimming a little of the rubber off and they all work perfect.
Weird, for some reason my original cable from ATT now is really loose, I have to like set the phone down a certain way to keep it charging/plugged in.
The only cables that now do fit snuggly are the ones from my external mini hard drives with the fat head, haha, I wonder why...my captivate still looks normal, can't figure it out.
I guess I should see if my normal cable fits with my externals or falls out of those too, if so it would be the cable. But it seems weird that the fat headed cables fit snuggly with my captivate, so that makes me think maybe its the captivate.
long winded stupid post, sorry.
i bought a blackberry cable from best buy... data and charging... 16 bucks. but when ever your puppy ate your data cable in the middle of the night and you're phone is at 30% battery, ya tend to pay for it...
Inexpensive replacement OEM Charger + USB Cable for Captivate SGH-i897!
4got2g0 said:
Do any of you guys and gals know of an aftermarket cable that will work with the captivate. I lost the original one that came with the phone. Have since bought two different chargers, one from the att store (zero charger), and they charge the phone but don't put it on USB mode like the original one did when I plug it to a laptop.
Sent from my rooted Cappy.
Click to expand...
Click to collapse
Check out www all4cellular DOT com
They have the OEM Samsung Captivate (U.S./Edison) Wall Charger and USB Charging+Data Cable for $6.95 + $2 Shipping.
The item number is "eta0u60jbe". But this item # includes BOTH the USB Wall Charger (# ETA0U60JBE) AND the USB-to-Micro USB data/charging Cable (# ECC1DU2BBE)!
I bought two of these and they are EXACTLY like the original Charger and ~5ft. USB Cable that comes with the Captivate. They are OEM/Samsung-branded and labeled and are not Chinese-made knock-offs. I am in SoCal and received them within a few days of ordering.
Here's a direct link:
www DOT all4cellular DOT com / samsung-eta0u60jbe-wall-charger DOT html
Hope this helps!
Billy B.
^^^ spam!!!
monoprice .com is better!
foofiebeast said:
Weird, for some reason my original cable from ATT now is really loose, I have to like set the phone down a certain way to keep it charging/plugged in.
The only cables that now do fit snuggly are the ones from my external mini hard drives with the fat head, haha, I wonder why...my captivate still looks normal, can't figure it out.
I guess I should see if my normal cable fits with my externals or falls out of those too, if so it would be the cable. But it seems weird that the fat headed cables fit snuggly with my captivate, so that makes me think maybe its the captivate.
long winded stupid post, sorry.
Click to expand...
Click to collapse
I had similar issues, till I realized that the problem was with the sliding door for the microUSB port - make sure it is pushed all the way back (you may hear a click) - its only then that all my MicroUSB cables fit w/out any modifications to them.
as always YMMV.
hope that helps
I second the Monoprice.com recommendation. I buy ALL my cables there. The heads on their micro USB cables are too large to plug into the Captivate unmodified, but I used a Dremel to fix that.
Both of my Monoprice cables are going strong, in contrast with my OEM cable, which started out excellent, but is now so loose as to not maintain a connection unless the phone and cable are precisely arranged.
Sent from my SAMSUNG-SGH-I897 using XDA App
4got2g0 said:
Thanks man. I actually just noticed the "charging only cable" written on the tag on the cable. Now I know what to look for. And you're right, the one I bought from a gas station was always popping out. The one from att fits like a glove though.
Sent from my rooted Cappy.
Click to expand...
Click to collapse
cant hyperlink yet. I ordered 2 of these, they are good and from samsung. on sale at the moment
amazon.com/Samsung-Replacement-Charging-SPH-M330-SCH-R100/dp/B001XXUOQI/ref=sr_1_1?ie=UTF8&qid=1293013918&sr=8-1
USB cables always wear out eventually especially as much as we use them. i just accidentally bought the crappy charge only one now i need to go get a data one
Samsung Captivate Data Cable
Hey Guys,
What You Need Is Samsung AT&A Captivate Data Cable?
lee_bruice said:
Hey Guys,
What You Need Is Samsung AT&A Captivate Data Cable?
Click to expand...
Click to collapse
That is indeed the one he needs.
I Am Grad That Is Useful.
Happy New Year!!!
tchan012 said:
I had similar issues, till I realized that the problem was with the sliding door for the microUSB port - make sure it is pushed all the way back (you may hear a click) - its only then that all my MicroUSB cables fit w/out any modifications to them.
as always YMMV.
hope that helps
Click to expand...
Click to collapse
I have the same problem with the original cable not fitting snug. Yes, the door is open all the way...until the click. I'm just glad to know I'm not the only one have the problem. Been doing it since day 1. I'm afraid to cut any bit of it off since its already slimmed down and there isn't much left to cut
Jmurph3 said:
I have the same problem with the original cable not fitting snug. Yes, the door is open all the way...until the click. I'm just glad to know I'm not the only one have the problem. Been doing it since day 1. I'm afraid to cut any bit of it off since its already slimmed down and there isn't much left to cut
Click to expand...
Click to collapse
Also having this issue. I wonder if Samsung has revised them since I bought mine on launch day.
jayrod88 said:
Also having this issue. I wonder if Samsung has revised them since I bought mine on launch day.
Click to expand...
Click to collapse
I have a 1009 model. Assuming that means it was manufactured Sept,2010. Now to find a microUSB
We have some micro USB 5' Cables coming in Monday. If they are like the sample they not only fit the Captivate properly, but when plugged into our new Car Plug ->USB (2100mA) adapter, my Captivate shows "Charging (AC) ".
We originally brought in the Hi-Power USB car adapter so iPad & Tablet customers could both run & charge at the same time. We have had enough request from customers looking to use it with Smart Phones, that I had to find the best matching cable.
Sent from my Samsung Captivate with Perception 10.2, Firebird2 v0.4 #49 Kernel, Firmware 2.2.1, Modem T959TLJL3 using XDA App
Monoprice...ALWAYS!!
As mentioned, get your cables from monoprice. I mean, you just can't beat a usb cable for $2. If it needs trimmed, I usually just use a razor knife/box cutter to remove the bulk, and it works perfectly. I actually had to order a 25ft. VGA cable from them a couple of days ago...$8. Seriously. Definitely the cheapest place I've seen to buy cables.
Any micro USB cables that you guys would recommend over the OEM original cable.
I seem to be one of the very few that have problems with the original cable fitting snuggly. Yes, the door is open all the way til it clicks, yet the cable easily falls out.
If anyone has a suggestion of another cable or has the same problem with a fix that I just somehow missed after searching for a couple of days, it would be greatly appreciated.
I had the same problem. After about a month of use it just came completely loose and would only stay in if I propped it up a certain way. I tried a friend's charger and it worked fine (likewise my charger was loose on his captivate).
I just took the usb cable from my external hard drive and that one fits very snuggly, unfortunately it is also much shorter
I'm also having this issue. I wonder why...
foofiebeast said:
I had the same problem. After about a month of use it just came completely loose and would only stay in if I propped it up a certain way. I tried a friend's charger and it worked fine (likewise my charger was loose on his captivate).
I just took the usb cable from my external hard drive and that one fits very snuggly, unfortunately it is also much shorter
Click to expand...
Click to collapse
Yes, this is exactly what I have to do for mine to charge. So I guess I'll have to just start looking for one that will work for me. It seems just any other standard micro USB cable will do the trick. Thanks a lot my friend.
jayrod88 said:
I'm also having this issue. I wonder why...
Click to expand...
Click to collapse
Well upon further inspection, you can see how the top of the phone is curved and if you look at with the USB door open from the top and tilted slightly back you can see how the jack actually looks crooked inside the phone. I'm quite sure that this is because of the curved top parallel to the circuit board that has the jack is too tall. And I think for some reason I might need to trim down the micro end a bit on the front side..it looks like its hitting the front side of the phone.
I'm looking for a replacement cable as well...even OEM is fine. The case around mine cracked off one night when I feel asleep playing on my phone. Mine was always kind of loose compared to the att charging cable which is nice and tight. Does radio shack carry cables like this?
Sent from my SAMSUNG-SGH-I897 using XDA App
i called AT&T about this with my cappy and they said that the charging port was bad and sent me a new phone , thats been 3 mo ago and the problem hasnt recurred.
(just a thought)
Search Amazon for "blackberry usb cable micro usb". The first result should be it, it's a very high quality, shielded cable. To get a solid, snug fit I suggest a razor or a knife to easily cut back some of the rubber around the micro tip. Works amazingly well. I could even make it work before I trimmed it.
just to elaborate, the specific micro end is called a "micro b " usb connection.
not to be confused with mini or micro a
of course the other end is just standard.
The place I work has a 5' nice quality cable that fits my Captivate tight. They got them to go with the 2100mA USB Car Charger we sell. Cost on the cable is $ 4.99 plus shipping (about $2.99 first class parcel).
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
I'm not sure if its quality, or just chance, but I've found that only some 3rd-party cables will work. I've tried a blackberry one that didn't work, and a really cheap one that did.
I would suggest keeping the one you got from samsung, just in case.
I'd like to know if anyone else had issues with cables not working?
I got a Samsung cable designed for the galaxy S on Amazon for like $6 with free shipping.
Sent from my SAMSUNG-SGH-I897 using XDA App
Jmurph3 said:
Any micro USB cables that you guys would recommend over the OEM original cable.
I seem to be one of the very few that have problems with the original cable fitting snuggly. Yes, the door is open all the way til it clicks, yet the cable easily falls out.
If anyone has a suggestion of another cable or has the same problem with a fix that I just somehow missed after searching for a couple of days, it would be greatly appreciated.
Click to expand...
Click to collapse
I had the same problem.
I used some tools(hammer,knife, etc) to fix the cable.
Now my cable works fine!!
Sent from my phone
I just used a razor blade to trim the rubber back, works great.
If you look at your cable. The black part and the silver part(part that goes in your phone) is not in a straight line.
Just try to make it straight. And use a knife to cut the rubber of the edge a little bit.
That should do the trick.
Sent from my phone
I haven't read all of the posts so I don't know if someone has already posted a solution to this problem, so I'll just answer.
I had this same problem. If you notice their are two tiny metal teeth that lock the charger into the phone. These teeth no longer stick out as far as they used to. That is why you are having this problem. The teeth are not bent. It is the micro usb plug that is around it. All that you need to do is give it a firm bush on the table. Bend the plug away from the teeth so that they stick out more. This fixed my problem.
When you put it back into your phone, you will notice that the plug is no longer in the phone at an angle.
bluemoon1221 said:
If you look at your cable. The black part and the silver part(part that goes in your phone) is not in a straight line.
Just try to make it straight. And use a knife to cut the rubber of the edge a little bit.
That should do the trick.
Sent from my phone
Click to expand...
Click to collapse
You should saved me from buying 3 more cables. I distroyed my OEM cable to make a jig because I bricked my phone. I ordered 3 sets of cables and they all had the same problem.... Usb kept popping off. So I was just about to go out and order 3 more sets if cables, this time OEM untill I decided to read this tread. It never occured to me that it was fitting in well because of the extra rubber on the connector. I trimmed it down and now the cable snapped in perfectly like it was supposed to. Thanks for the fix!
Sent from my SAMSUNG-SGH-I897 using XDA App
I'm afraid of buying the wrong cable off Amazon. There is so much out there. Can anyone post a link?
[email protected] said:
I haven't read all of the posts so I don't know if someone has already posted a solution to this problem, so I'll just answer.
I had this same problem. If you notice their are two tiny metal teeth that lock the charger into the phone. These teeth no longer stick out as far as they used to. That is why you are having this problem. The teeth are not bent. It is the micro usb plug that is around it. All that you need to do is give it a firm bush on the table. Bend the plug away from the teeth so that they stick out more. This fixed my problem.
When you put it back into your phone, you will notice that the plug is no longer in the phone at an angle.
Click to expand...
Click to collapse
I know this is getting old, but it took me about 2 hours to find an answer that WASN'T recommending to just make sure the slider was all the way open. For no reason at all, my phone cable just wouldn't hold a real connection this morning... your answer saved the day
For cables that are good quality and cheap, go to www.meritline.com ....... I have never gotten a bad cable from them, typically I use their HDMI cables but the USB cables are less complex and work just as well. My last usb cable was one of theirs.
I just wanted to share my experiences with the Beyond Cell Inflex case. I purchased a black one off eBay for around $14 delivered. The case fits the phone well, looks good, and feels good but there is not enough room around the USB charging port to actually plug the phone in while it's in its case. The USB cable that came with the phone fits, barely. I have to kind of wiggle it to get it in and it feels like I'm stressing the female connector in the phone by doing that. All the other USB cables or chargers I have from previous phones will not fit. I can force the connector in and the phone begins charging but then it pops right back out as soon as I remove my hand. I'm very disappointed. You get what you pay for I suppose. Here's a link:
http://www.beyondcell.com/Ecommerce/General/BrowseCategory.aspx?CategoryId=9169
I want to buy a magnetic charger and I live in India and very low quality cables are available on the local websites. I have looked for cables on eBay.com which ship to my location but I don't know which one to buy. I need your opinions. My maximum budget is 12$(incl. shipping).
The WSKEN Cable is available at my location. Is the cable worth buying?
Thanks in advance.
I got wsken magnetic cable, and its build quality is fine, but magnet is not that strong - its even weaker than another fake original sony cable i got. But if you just use it to charge your phone without using it, it can do the job.
I wouldnt recommend one with a very strong magnet. There have been some horror stories of the storng magnet PULLING the phones charge port completely out. I got a fairly weak one from amazon.
http://www.amazon.com/gp/product/B00UOVZOBK?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Fits perfectly with my Cruzerlite TPU case. I even have EXTRA room for clearance. Magnet isnt the strongest which makes me happy as I only charge at night when I'm sleeping as the phone lasts through the day for me.
Yup, it happened to me. I use a Magnector adaptor and it is very strong, after a while the whole connector came off as there was simply a VERY thin acrylic glue foam tape (VHB ?) holding it and keeping water off. By thin I do not mean the thickness but the actual long side surface
The good news is that the connection with the internal PCB board are spring loaded, so I put it back in place and tested it then used a needle to put some cyanoacrlylate glue to hold it, it never came out again and the phone still look ok. Now I always try to removing it with a twisting motion just in case...
It is hard for me to understand how they can claim waterproof and use such thin gasket but I still like this phone a lot!
hmm dont think I'll be getting a magnetic charger any time soon then if it comes off that easily. >_<
It's just the Magnector adapter that seems to do that. None of the others are strong enough to pull the connector off of the phone.
I just bought an OEM one from aliexpress for only $2.71 US. btw you only save .03 if you use the mobile app
http://www.aliexpress.com/store/pro...a-Z1-Charger-Adapter/1775016_32429292298.html
I also have a generic magnetic charger. The one with a circle blue LED in the part near the magnet. I found that it charges slowly compared to the OEM usb cable that came in the box. I used the same OEM charger for both tests.
Charging via magnetic cable is roughly 60-70% of the speed of normal USB charging. Is this just me that I have a low quality cable or is it really that much slower?
I tried two Magnetic cables but they don't work on my Z3 Compact because pins are not aligned with phone and charging not working probably because there is no contact. Actually i got one with LED indicator to work several times but on slightly move it stops charging and it is hard to get it to charge again so I gave up on these cables.
I bought original Sony DK48 Dock and it's working out of the box. Only issue is that I need to remove protective case before charging because with it phone won't fit in Dock. It almost fits so I'll probably try to modify larger adapter so phone can fit with case...
I received my DK48 dock and magnetic cable from Ali Express and they both work great. The charging cable ($2.71) matches the pins perfectly so doesn't appear to be a knock-off. I have a Devilcase bumper and works with the DK48 dock also with the case on--just attach the included back rest. It takes me a few times to get it aligned perfectly to charge but works.
I'm using this cheap one and it works great for me. Magnet is ok so you can even move your phone as long as the cable is parallel to your phone.
http://www.ebay.com/itm/Magnetic-Ch...39h-KK-/261850771916?var=&hash=item3cf785b1cc
I'm have WSKEN X-cable Easy Version, and it's great.
You can also try WSKEN X-CABLE DOUBLE METAL which has a charge indicator led.
Both cables charge my device faster than original Xperia Z2 charger and magnet is not too weak/too powerful.
Check WSKEN website for details.
I've tried several magnetic chargers and adapters and always facing the same problem, too weak magnet and if the phone is moved even an inch the cable falls off. Finally I got WSKEN X-CABLE for 7$ and that did the trick, everything works great including fast charging. You can literally hold your phone up in the air by the charger. And no, the magnet is not too strong as described in previous posts, with a slight pull it comes off without breaking the phones charging port. There is even a little plastic widget included to attach the cable into the right position angle and you can perfectly use the phone while charging. Link: http://www.ebay.com/itm/112026597308?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT