I have my device unlocked and rooted but when I try and flash with fastboot I can see the kernel logo but then my phone turns off and starts up normally? I have seen people put the kernel in the SD card but when I do that it doesn't show up? I am also on .69 Can someone help me?
To flash a kernel;
1. open file where fastboot is;this is where the boot.img you've downloaded should be too
2. press shift+right click in window and choose 'open command window here'
3. switch off/remove battery from phone, then hold menu button whilst connecting usb. led should be blue.
4 in command window type 'fastboot flash boot boot.img, or if you've renamed the boot.img file then the new name
fastboot will show progress(normally takes under 1-2 secs),once finished disconnect, reboot
sinkster said:
To flash a kernel;
1. open file where fastboot is;this is where the boot.img you've downloaded should be too
2. press shift+right click in window and choose 'open command window here'
3. switch off/remove battery from phone, then hold menu button whilst connecting usb. led should be blue.
4 in command window type 'fastboot flash boot boot.img, or if you've renamed the boot.img file then the new name
fastboot will show progress(normally takes under 1-2 secs),once finished disconnect, reboot
Click to expand...
Click to collapse
I did all of that but it still shows me the kernel image then just reboots again normally :/
If you're getting the kernel flash screen then press down volume key repeatedly when led/button leds come on during boot. That enters cwm menu.
sinksterĀ©
sinkster said:
If you're getting the kernel flash screen then press down volume key repeatedly when led/button leds come on during boot. That enters cwm menu.
sinksterĀ©
Click to expand...
Click to collapse
What do I do then?
Depends on which kernel you're using. Basically, if you've used fastboot to boot the kernel correctly then when you reboot you should see the kernel flashscreen e.g. doomkernel has doomlords android in cloak, etc. If that's the case, enter cwm by repeatedly spamming(pressing) the back key or volume key once the lights come on. You'll get a menu with cwm(clockword mod recovery) options such as format phone, backup/restore, install zip, and others. If you're flashing a rom then make sure it's on your sd card, use 'install zip' and select the rom(or update) zip to flash, and confirm. If it's a different dev from the rom your current rom then also select factory reset to wipe any previous data, and advanced/wipe dalvik, to ensure a clean install. then reboot.
sinkster said:
Depends on which kernel you're using. Basically, if you've used fastboot to boot the kernel correctly then when you reboot you should see the kernel flashscreen e.g. doomkernel has doomlords android in cloak, etc. If that's the case, enter cwm by repeatedly spamming(pressing) the back key or volume key once the lights come on. You'll get a menu with cwm(clockword mod recovery) options such as format phone, backup/restore, install zip, and others. If you're flashing a rom then make sure it's on your sd card, use 'install zip' and select the rom(or update) zip to flash, and confirm. If it's a different dev from the rom your current rom then also select factory reset to wipe any previous data, and advanced/wipe dalvik, to ensure a clean install. then reboot.
Click to expand...
Click to collapse
Okay, I have done everything there. I am now waiting for it to complete.
sinkster said:
Depends on which kernel you're using. Basically, if you've used fastboot to boot the kernel correctly then when you reboot you should see the kernel flashscreen e.g. doomkernel has doomlords android in cloak, etc. If that's the case, enter cwm by repeatedly spamming(pressing) the back key or volume key once the lights come on. You'll get a menu with cwm(clockword mod recovery) options such as format phone, backup/restore, install zip, and others. If you're flashing a rom then make sure it's on your sd card, use 'install zip' and select the rom(or update) zip to flash, and confirm. If it's a different dev from the rom your current rom then also select factory reset to wipe any previous data, and advanced/wipe dalvik, to ensure a clean install. then reboot.
Click to expand...
Click to collapse
Nope still nothing, now I just got bootloop :/ I'm trying to use doomlord ICS kernel with JJ's hybrid rom?
Try flashing the rom again, in this order; wipe data/factory reset, install zip, install wifi modules, wipe dalvik cache. reboot
sinkster said:
Try flashing the rom again, in this order; wipe data/factory reset, install zip, install wifi modules, wipe dalvik cache. reboot
Click to expand...
Click to collapse
Just got bootloop again :/
Are you getting the bootscreen, think in jj's it's the new xperia boot.
sinkster said:
Are you getting the bootscreen, think in jj's it's the new xperia boot.
Click to expand...
Click to collapse
To make it easier could you provide me a good rom and kernel that go together?
If you want ics then jj's or krabappels are probably the easiest, but use the ics beta kernel. Arconium with doomkernel 21(gingerbread) is probably your best bet due to the support.
sinksterĀ©
Related
Is there more n00b friendly instructions than this to install AOKP? Sorry I am a former Blackberry owner, I am a little nervous but I am tech savvy. I just don't want to brick my phone..
My phone is rooted.. I have the latest AOKP and gapps from the AOKP site.
1. Make sure you're on the latest CWM
2. MAKE A NANDROID
3. wipe data/factory reset in recovery
4. flash ROM
5. flash Gapps
6. reboot
=
1. I have the latest ROM manager.
2. No idea what or how to use it... (I did a full backup with Galaxy Nexus Root Toolkit, good enough?)
3. Is this done in the ROM manager, I think so, or when I am in bootloader mode maybe?
4. Flashing it I assume with ROM manager, pick the zip and voila..
5. No idea about this one. With ROM manager too?
6. Dah.. I think I can handle this step..
Appreciate any help.. remember n00b, never had an android and never did anything with my BB. N00b. Thanks!
Since you are already rooted.... I'll keep it simple. You can backup your ROM in ROM manager.
Boot to CWM
Wipe data (wipes cache too)
Go to advanced, wipe Dalvik
Flash AOKP
Flash GAPPS
Reboot
Flash kernel if you are using a modified one. If you flash a kernel after you boot, just wipe dalvik.
Flukester69 said:
Is there more n00b friendly instructions than this to install AOKP? Sorry I am a former Blackberry owner, I am a little nervous but I am tech savvy. I just don't want to brick my phone..
My phone is rooted.. I have the latest AOKP and gapps from the AOKP site.
1. Make sure you're on the latest CWM
2. MAKE A NANDROID
3. wipe data/factory reset in recovery
4. flash ROM
5. flash Gapps
6. reboot
=
1. I have the latest ROM manager.
2. No idea what or how to use it... (I did a full backup with Galaxy Nexus Root Toolkit, good enough?)
3. Is this done in the ROM manager, I think so, or when I am in bootloader mode maybe?
4. Flashing it I assume with ROM manager, pick the zip and voila..
5. No idea about this one. With ROM manager too?
6. Dah.. I think I can handle this step..
Appreciate any help.. remember n00b, never had an android and never did anything with my BB. N00b. Thanks!
Click to expand...
Click to collapse
You don't have to flash through "Rom Manager" its much easier in ClockworkMod Recovery (assuming you have it installed, check at the top of Rom Manger to see if you have the latest recovery). To get there, you just have to hold down "Power + Volume Up + Volume Down," when you're there, you can move up and down with your volume up/down buttons and press "enter" with the power button. From there you can create a backup (backup and restore --> backup), wipe data/cache/dalvik (wipe data/factory reset), and flash your Rom/Gapps (install zip from sdcard --> choose zip from sdcard --> download --> find your rom/gapps). You should reboot after that, and it'll be set.
Ok that's cool..
few questions.. boot to CWM is that the recovery manager on my phone? or Do you mean select in ROM manager "Flash ClockworkMod Recovery"
Go to advanced, wipe Dalvik, I expect that is an option when phone is booted. I don't see that in ROM manager.
Flash Kernel? Now I'm kinda confused. I thought AOKP has the kernel, am I using a modified one? Uh, I just unlocked and rooted this with GNR Toolkit nothing else.
Another question I am curious in ROM manager, where do these rom backups go? Should I not put those on my pc hd somewhere safe?
Flukester69 said:
Ok that's cool..
few questions.. boot to CWM is that the recovery manager on my phone? or Do you mean select in ROM manager "Flash ClockworkMod Recovery"
Go to advanced, wipe Dalvik, I expect that is an option when phone is booted. I don't see that in ROM manager.
Flash Kernel? Now I'm kinda confused. I thought AOKP has the kernel, am I using a modified one? Uh, I just unlocked and rooted this with GNR Toolkit nothing else.
Another question I am curious in ROM manager, where do these rom backups go? Should I not put those on my pc hd somewhere safe?
Click to expand...
Click to collapse
You must have flashed ClockwordMod Recovery already... at the top in the Rom Manager application where it says Flash ClockwordMod Recovery, it should have something saying "Current Recovery: 5.5.0.4" and "Latest Recovery 5.5.0.4." Make sure your current and latest match up. If they do, then you already have CWM installed. Then you can boot into it from the instructions I provided in my post above (turn off phone, hold down power + volume up + volume down).
AOKP has a kernel, you can choose to download and flash a separate kernel if you want.
The rom backups go to your virtual SD card, and will not get wiped when you do a data wipe, so they are secure (i.e. you don't have to put them on your computer if you don't want to).
anton that makes sense mostly but..
"and flash your Rom/Gapps (install zip from sdcard --> choose zip from sdcard --> download --> find your rom/gapps). You should reboot after that, and it'll be set."
If I
"From there you can create a backup (backup and restore --> backup), wipe data/cache/dalvik (wipe data/factory reset)"
Wouldn't that mean there would be nothing on the SD card to flash with?
Flukester69 said:
anton that makes sense mostly but..
"and flash your Rom/Gapps (install zip from sdcard --> choose zip from sdcard --> download --> find your rom/gapps). You should reboot after that, and it'll be set."
If I
"From there you can create a backup (backup and restore --> backup), wipe data/cache/dalvik (wipe data/factory reset)"
Wouldn't that mean there would be nothing on the SD card to flash with?
Click to expand...
Click to collapse
No. Wiping data/cache/dalvik does not touch SD Card contents.
Flukester69 said:
Ok that's cool..
few questions.. boot to CWM is that the recovery manager on my phone? or Do you mean select in ROM manager "Flash ClockworkMod Recovery"
Go to advanced, wipe Dalvik, I expect that is an option when phone is booted. I don't see that in ROM manager.
Flash Kernel? Now I'm kinda confused. I thought AOKP has the kernel, am I using a modified one? Uh, I just unlocked and rooted this with GNR Toolkit nothing else.
Another question I am curious in ROM manager, where do these rom backups go? Should I not put those on my pc hd somewhere safe?
Click to expand...
Click to collapse
Yes, CWM is the recovery. Flashing CWM only flashes it to your phone, you still have to boot into it.
Don't wipe or anything from Rom Manger, that's an option that I don't recommend. From Rom Manager you can boot to CWM, do that and do the above I posted. You should be fine.
Just remember, do a factory reset, wipe dalvik, flash new ROM, then flash GAPPS. After that you are good. First boot will take some time.
You need to format /system too. It's under Mounts and storage.
Flukester69 said:
Is there more n00b friendly instructions than this to install AOKP? Sorry I am a former Blackberry owner, I am a little nervous but I am tech savvy. I just don't want to brick my phone..
My phone is rooted.. I have the latest AOKP and gapps from the AOKP site.
1. Make sure you're on the latest CWM
2. MAKE A NANDROID
3. wipe data/factory reset in recovery
4. flash ROM
5. flash Gapps
6. reboot
=
1. I have the latest ROM manager.
2. No idea what or how to use it... (I did a full backup with Galaxy Nexus Root Toolkit, good enough?)
3. Is this done in the ROM manager, I think so, or when I am in bootloader mode maybe?
4. Flashing it I assume with ROM manager, pick the zip and voila..
5. No idea about this one. With ROM manager too?
6. Dah.. I think I can handle this step..
Appreciate any help.. remember n00b, never had an android and never did anything with my BB. N00b. Thanks!
Click to expand...
Click to collapse
Ok this is what you need to do.
Step 1: Open ROM Manager and install CMR (first option). You need to make sure you select the correct version of your phone (verizon is CMDA all others are GSM, I think). After it is finished installing proceed to step 2.
Step 2: In ROM Manager select "Reboot into Recovery". It will reboot and you will see the Google splash screen then a black page with blue text. If you see this proceed to step 3.
Step 3: use the volume keys to navigate to the option "Backup and Restore". When you have highlighted this option use the power button to select it. You will then a select "backup". Let it do its thing (will take a few minuets). When its done it will return you to the first screen then continue to step 4.
Step 4: Select "wipe data/factory reset". You will be taken to a screen with a bunch of "no"s and one "yes" if you are sure you want to wipe then select "yes" and let it do its thing. When its done it will return you to the main menu. Proceed to step 5.
Step 5: Select "install zip from sdcard". Select "choose zip from sdcard". Browse the ROM file. Select it and you will be at the no no no... yes screen. Select "yes" and let it do its thing. When its done you will be taken to the screen that says "choose zip from sdcard". Select that option again and browse to the gapps file. Flash it like the ROM. When you are done it will take you to the "choose zip from sdcard" screen. From there select "*****Go Back*****" then Select the first option "reboot system now". Your phone will now reboot. Note that it will take a lot longer than usual.
Also note that navigating CMR is a pia because the volume keys are jumpy.
Enjoy...
Flukester69 said:
Ok that's cool..
few questions.. boot to CWM is that the recovery manager on my phone? or Do you mean select in ROM manager "Flash ClockworkMod Recovery"
Go to advanced, wipe Dalvik, I expect that is an option when phone is booted. I don't see that in ROM manager.
Flash Kernel? Now I'm kinda confused. I thought AOKP has the kernel, am I using a modified one? Uh, I just unlocked and rooted this with GNR Toolkit nothing else.
Another question I am curious in ROM manager, where do these rom backups go? Should I not put those on my pc hd somewhere safe?
Click to expand...
Click to collapse
1. In Rom Manager, select back up and restore. This creates an exact back up of what your phone has on it and the settings.
2. In Rom Manager, select reboot in recovery. Using the volume rocker to move to wipe/data factory reset. Select option with power button. When that is complete, select install zip from sd card. Select the AOKP Rome file and flash it. Select install rom from sd card a second time and flash the Gapps (google app pack). The reboot phone.
Wiping dalvik is little redundant IMO, most custom Roms are including scripts to wipe automatically.
Since you did a factory reset (a must when changing Roms), you will need to set your phone back up.
You will leave your back up of your sd card as this is the only way you can restore via Rom Manager.
When you flash the rom, it will come with the kernel. Some prefer different kernels and will flash those as well. I have used kernels by Heyitslou since my Incredible days and flashed his V3 defiant with AOKP. It can be found on Rootzwiki.
Ok guys, many thanks. I think I got enough info.
@mentose457 I got the ROM manager installed and under CWM recovery the current and latest do match up. Do I still need to do that?
That is what I was looking for a n00b guide. Hehehe! Thanks everyone I will study those instruction and try this out.
Appreciate your help and patience guys..
mentose457 said:
Ok this is what you need to do.
Step 1: Open ROM Manager and install CMR (first option). You need to make sure you select the correct version of your phone (verizon is CMDA all others are GSM, I think). After it is finished installing proceed to step 2.
Step 2: In ROM Manager select "Reboot into Recovery". It will reboot and you will see the Google splash screen then a black page with blue text. If you see this proceed to step 3.
Step 3: use the volume keys to navigate to the option "Backup and Restore". When you have highlighted this option use the power button to select it. You will then a select "backup". Let it do its thing (will take a few minuets). When its done it will return you to the first screen then continue to step 4.
Step 4: Select "wipe data/factory reset". You will be taken to a screen with a bunch of "no"s and one "yes" if you are sure you want to wipe then select "yes" and let it do its thing. When its done it will return you to the main menu. Proceed to step 5.
Step 5: Select "install zip from sdcard". Select "choose zip from sdcard". Browse the ROM file. Select it and you will be at the no no no... yes screen. Select "yes" and let it do its thing. When its done you will be taken to the screen that says "choose zip from sdcard". Select that option again and browse to the gapps file. Flash it like the ROM. When you are done it will take you to the "choose zip from sdcard" screen. From there select "*****Go Back*****" then Select the first option "reboot system now". Your phone will now reboot. Note that it will take a lot longer than usual.
Also note that navigating CMR is a pia because the volume keys are jumpy.
Enjoy...
Click to expand...
Click to collapse
Damn, you typed faster than I did!
spence341 said:
Damn, you typed faster than I did!
Click to expand...
Click to collapse
Hahaha he did.. great help all of you. I'm 99% there in terms of confidence here.
Step 1: Open ROM Manager and install CMR (first option). You need to make sure you select the correct version of your phone (verizon is CMDA all others are GSM, I think). After it is finished installing proceed to step 2.
I don't see anything in ROM Manager that specifically says install CMR (first option). First option is Flash ClockworkMod Recovery and it has a latest and current ...5.5.0.2
When I unlocked and rooted I had installed ROM Manager etc and I see a current and latest... they are the same... blah blah blah 5.5.0.2. Do I still need to do this step?
Flukester69 said:
Step 1: Open ROM Manager and install CMR (first option). You need to make sure you select the correct version of your phone (verizon is CMDA all others are GSM, I think). After it is finished installing proceed to step 2.
When I unlocked and rooted I had installed ROM Manager etc and I see a current and latest... they are the same... blah blah blah 5.5.0.2. Do I still need to do this step?
Click to expand...
Click to collapse
No, if current and latest are the same, then you're fine and you can move on to the next step.
Errm.. I used ROM Manager I selected Backup rom, i see the android guy and see files backing up. Which turns out to be the same as your step 2 and 3. LOL! hopefully multiple backups dont hurt. LOL I'm currently finishing step 3 I guess. Next is wipe etc.
No offense to guy who did rom, but a Pink unicorn with rainbow hair.... err
No offense but generally speaking a macho guy like me hopes nobody will see a pink unicorn on his android phone. Haha!
Thanks guys, I am restoring my apps now and I think I am good. Really appreciate your help! Can't wait to try this ROM out!
Flukester69 said:
Thanks guys, I am restoring my apps now and I think I am good. Really appreciate your help! Can't wait to try this ROM out!
Click to expand...
Click to collapse
A lot of people report problems restoring Apps+Data using Titanium Backup, so I recommend only restoring the App part and not the Data part if you want to have the least amount of FCs. Unless you're restoring from market... then disregard this post. =P
What's the correct way to flash a.kernal, when ever I flash one I do nothing, but I was just wondering if you should treat it like a ROM or I'm fine doing what I'm doing
Sent from my express 6.1 using more lionfish 1.4
Got this from the how to section.....hope it helps
How do I flash a ROM/Kernel/Theme/etc
99% of all ROM's, kernels and radios come flashable (will be a .zip file).
0) MAKE SURE YOU HAVE 30% BATTERY AT LEAST!
1) Plug your phone into your computer and connect it as Disk Drive.
2) Place your ROM/Kernel/Radio/Theme/ETC into your SD card. (If you have the 4 in 1 option skip to step 5)
3) Power your phone off. Hold VOLUME DOWN and POWER at the same time till you load into Bootloader.
4) Select recovery by using the volume buttons to move and hit the power button to load into Recovery.
5) Once in recovery, make a NANDROID BACKUP and wipe your data/cache/dalvik! If you are flashing an update to your ROM and want to keep your apps, don't wipe your data. If you run into errors or FC (Force closes), wipe your data/cache/dalvik and flash again.
6) Flash your file by going to Install/Flash zip from sdcard.
7) Select your file and hit the power button. Press power again to confirm if needed.
8) Wait till the flash is complete and reboot.
Kinda helps.. but it mainly is saying to flash a ROM, so pretty much just wipe dalvik?
sent from my expressed out EVO using more lionfish
Yes, wipe only cache and dalvik when flashing a kernal. Wiping data is only for flashing roms.
Hi All
Sorry for my bad English
I wanted to flash the following rom http://forum.xda-developers.com/showthread.php?t=1626331
but after flashing my phone keeps rebooting (looping on on boot)
On the same thread I came across a solution that creating a partition through recovery >> advance will fix the looping issue. But no matter which option is select in recovery menu the screen goes blank with REVOLUTIONARY logo in the center.
please HELP !!!
I flashed the rom through ROM MANAGER app in market
I have flashed other roms before and they worked fine but this one didn't.
Thanks in advance
Use the trackball to select, not power button.
Lesicnik1 said:
Use the trackball to select, not power button.
Click to expand...
Click to collapse
Thank you for replying
I'm able to select the option from menu but when I select advanced (or any other option from menu) and press the power button the enter it comes up with REVOLUTIONARY logo
Please help, Im not sure what to do now
Like I said use the trackball (little circular button on the bottom) to select. Not the power button.
swimmer21 said:
I'm able to select the option from menu but when I select advanced (or any other option from menu) and press the power button the enter it comes up with REVOLUTIONARY logo
Click to expand...
Click to collapse
I think what Lesicnik1 meant was: you use the power button to select recovery in HBOOT. In Clockworkmod you should use the trackball to select - not the power button
(although I remember slightly you could set the other too - but I'm not sure)
--- EDIT ---
On the other hand - if you already flashed other ROMs you should be used to that.
So if that's not your problem: have you tried to reflash this - or a different ROM? Besides that CM9 is officially experimental bootloops often are caused by not wiping caches. It's also a good idea to format system before flashing a totally different ROM.
eventcom said:
I think what Lesicnik1 meant was: you use the power button to select recovery in HBOOT. In Clockworkmod you should use the trackball to select - not the power button
(although I remember slightly you could set the other too - but I'm not sure)
--- EDIT ---
On the other hand - if you already flashed other ROMs you should be used to that.
So if that's not your problem: have you tried to reflash this - or a different ROM? Besides that CM9 is officially experimental bootloops often are caused by not wiping caches. It's also a good idea to format system before flashing a totally different ROM.
Click to expand...
Click to collapse
Thanks
I'm able to select the advanced option and I also created a partition EXT size 512 SWP size 0 but my phone is still not booting it keeps looping.
I have also noticed that very time I partition my SD card it gets completely formatted (even deleting the Zip file)
I have always been using the ROM manager app to install it worked fine but this rom keeps looping
should I partition and then install the Zip file or the other way ?
Am I doing any thing wrong .
Thanks again @Lesicnik1 and @eventcom
Partitioning the SD card does format it.
Do this.
Partition SD Card (not needed if you already did)
Go back to the main menu of the recovery
Mounts and Storage
Wipe Data
Wipe System
Connect USB cable to phone
Mount USB Storage
Put ROM's .zip file on
Re-flash ROM
I see (haven't read carefully) not an ICS ROM - just ICS style. If you used to have a CM ROM before wiping system shouldn't be necessary (but it wouldn't harm also) - I always do the following when flashing a new ROM: format system, wipe cache, flash the new ROM, flash GApps. The requirements of the thread say furthermore: "Wipe Dalvik,Cache and Data" - so first: have you done that?
Do you use custom mtd partitions on your phone? (as you always have to reflash the bravo-boot-file afterwards...)
eventcom said:
I see (haven't read carefully) not an ICS ROM - just ICS style. If you used to have a CM ROM before wiping system shouldn't be necessary (but it wouldn't harm also) - I always do the following when flashing a new ROM: format system, wipe cache, flash the new ROM, flash GApps. The requirements of the thread say furthermore: "Wipe Dalvik,Cache and Data" - so first: have you done that?
Do you use custom mtd partitions on your phone? (as you always have to reflash the bravo-boot-file afterwards...)
Click to expand...
Click to collapse
It worked it worked!!
I almost thought I killed my phone
I understand its not ICS. I just wanted a different UI
Thanks you so much @Lesicnik1 and @eventcom
swimmer21 said:
It worked it worked!!
I almost thought I killed my phone
I understand its not ICS. I just wanted a different UI
Thanks you so much @Lesicnik1 and @eventcom
Click to expand...
Click to collapse
glad to see you could solve it :good:
hi
i already unlock the bootloader, install custom recovery TWRP, and done a backup
i also copy my backup to PC
now i'm confuse
- i need to root the phone or can i just flash the new room?
- if i need to root the phone i found an italian guide on 4.0 and attach file, can i use that? i have 4.1.1 on mine now
i'm not interested to have HTC stock with root but what i want is to install MIUI ROM
this is the only guide i found in english that explains how to install the rom
external link (i can't post it) miuiandroid.com/community/threads/installing-the-htc-one-x-required-s-on-steps.16592/
what i understand is:
- boot my device power + menu down, to see the FASTBOOT USB i have to select FASTBOOT
- flash the boot.img
- press the power button once (HBOOT i guess), click volume down, highlight recovery & press power
- Flash the downloaded ROM via recovery normally and it followup at this link
external link (i can't post it) miuiandroid.com/community/threads/how-to-update-upgrade-miui.15424/
i need to copy the img rom in SD ROOT before starting with all this process
- now i need to Wipe data/factory reset, Cache Wipe & Dalvik Cache Wipe in all tutorial i found this is done with clockworkmod
in TWRP under menu WIPE i guess are System, Cache, Dalvik buttons
after that i'm note sure if i need to flash italian language, if i don't need and i can just download it later i tihink is not a big deal
unless is all in chinese
is the metod correct?
do i have to copy ROM file in .zip format as i download?
here where i found ROM
from official site grey button miui.com/download-7.html
OR
from UK web site miuiandroid.com/community/threads/3-4-28.20232/
the boot.img is here
point 3 miuiandroid.com/community/threads/installing-the-htc-one-x-required-s-on-steps.16592/
i'm not sure if would be better to use clockworkmod, since most tutorials use that..
thanks
Doesn't matter which recovery you use. Yes just place the zip file on your sd card. Flash boot.img as you already said. Perform a full wipe and then flash the Rom zip. Reboot and its done.
The Roms are pre-rooted so you dont need to worry about that. Italian language should be included i guess.
Sent from my HTC One X using xda app-developers app
Heres what i do :
1) Put Rom.zip on SD card
2) Put boot.img in fastboot folder
3) fastboot erase cache
4) fastboot flash boot boot.img
5) fastboot erase cache
6) Reboot into recovery
7) Full wipe (except sd card)
8) Install rom
9) Enjoy new rom
Andy
i did my first mess but fortunally i could restore since i had copy the backup on my mac too
i don't know what went wrong but this is what happened:
- i did how was told before, but actually i download boot.img and rom from 2 different sites
- after reboot it didn't move from first screena waited for 15 minutes almost, so i did reboot in recovery tri to wipe but nothing happened
- so i decide to restore... but it did boot even if it was successful
- i thought that if i flashed the boot.img first time i may need to do it again, i found boot.emmc.win, rename it to boot.img, flash it and then i restored successfully
:victory:
now, to try a different rom i need to restore (maybe is safer)? can i copy the rom from recovery or fastboot?
what can it be wrong with my miui rom? could it be boot.img and rom file mismatch? can't find where to download both
al404 said:
i did my first mess but fortunally i could restore since i had copy the backup on my mac too
i don't know what went wrong but this is what happened:
- i did how was told before, but actually i download boot.img and rom from 2 different sites
- after reboot it didn't move from first screena waited for 15 minutes almost, so i did reboot in recovery tri to wipe but nothing happened
- so i decide to restore... but it did boot even if it was successful
- i thought that if i flashed the boot.img first time i may need to do it again, i found boot.emmc.win, rename it to boot.img, flash it and then i restored successfully
:victory:
now, to try a different rom i need to restore (maybe is safer)? can i copy the rom from recovery or fastboot?
what can it be wrong with my miui rom? could it be boot.img and rom file mismatch? can't find where to download both
Click to expand...
Click to collapse
extract the boot image from the rom you are going to use
ok, i tryed again but now it get stack on Mi black screen
i waited 8 minutes but nothing happens, i also tried to wipe cache and davik, nothing happens
at list i get to black Mi screen
do i need to delete the boot.img from ROM zip?
what could it be?
1st u didn't mention which phone u r using
2nd dn't get confuse while downloading rom n .img file
Type in google
(Ur phone model) android development xda
U'll find all the stuffs related to ur phone
So try this 1 n remember before updating or rooting or anythg related to ur which can mess ur phone or can brick ur phone
I suggest u read twice the thread n procedures n also check thrice the stuff which u gonna need to perform ur act.
Sent from my GT-N7100 using xda premium
al404 said:
ok, i tryed again but now it get stack on Mi black screen
i waited 8 minutes but nothing happens, i also tried to wipe cache and davik, nothing happens
at list i get to black Mi screen
do i need to delete the boot.img from ROM zip?
what could it be?
Click to expand...
Click to collapse
i would try a different rom for now, viperx perhaps. and the boot image is in the rom zip, extract the boot img from the rom and put it in your fastboot folder then copy the rom to your sdcard. once you have done that, fastboot erase cache, flash the boot image, fastboot erase cache again, then back into recovery, wipe cache and dalvik just to be sure then use recovery to flash the rom and hey presto. all of the above is assuming you have the one x international tegra 3
I have htc one x european terga 3, as far as I know mini is only for tegra 3
what you describe is exactly what I did:
- I leave the rom zip ad it is, I didn't remove boot.imf that I extract, correct?
- when I flash I hit hoot fastboot, connect USB and fastboot change in fastboot USB, to go back I select Hboot and and hit power, prom there recovery
- I did unlock bootloader but did not get rooted my phone, could it be that?
al404 said:
I have htc one x european terga 3, as far as I know mini is only for tegra 3
what you describe is exactly what I did:
- I leave the rom zip ad it is, I didn't remove boot.imf that I extract, correct?
- when I flash I hit hoot fastboot, connect USB and fastboot change in fastboot USB, to go back I select Hboot and and hit power, prom there recovery
- I did unlock bootloader but did not get rooted my phone, could it be that?
Click to expand...
Click to collapse
read this post. at least twice!! http://forum.xda-developers.com/showthread.php?t=2069904 do not do the "unlock bootloader" section as you already did that
@nogotaclue sorry i read so many, and some of them sayed that root was not necessary if you flash a new rom, other sayed it could still be necessary... now i rooted with the app and did a new backup that i'm coping on PC
reading further it says: to wipe, install rom, and flash boot.img after
"Now go back and press install. Go to the folder where the ROM you downloaded, is located in. Select the ROM and slide the screen to flash it. After it flashes, press the back button. Press Reboot and Reboot into bootloader. Open the ROM you downloaded from your computer. You should see boot.img. Extract it to your computer. Open my toolkit and press Flash a Kernel. Locate the boot.img and it will flash it."
al404 said:
@nogotaclue sorry i read so many, and some of them sayed that root was not necessary if you flash a new rom, other sayed it could still be necessary... now i rooted with the app and did a new backup that i'm coping on PC
reading further it says: to wipe, install rom, and flash boot.img after
"Now go back and press install. Go to the folder where the ROM you downloaded, is located in. Select the ROM and slide the screen to flash it. After it flashes, press the back button. Press Reboot and Reboot into bootloader. Open the ROM you downloaded from your computer. You should see boot.img. Extract it to your computer. Open my toolkit and press Flash a Kernel. Locate the boot.img and it will flash it."
Click to expand...
Click to collapse
yes you can do it that way, i usually flash first but sometimes it does not work, so just flash it last as it says in the tutorial
after root, with the same steps, the ROM starts... but
touch screen is not working :crying:
now i'm gonna look arond to see if i found some post about that
this (kernel patch) solved my last issue
http://miuiandroid.com/community/threads/hox-miui-v5-official-release.20215/page-2
al404 said:
this (kernel patch) solved my last issue
http://miuiandroid.com/community/threads/hox-miui-v5-official-release.20215/page-2
Click to expand...
Click to collapse
So everything working now ?
Sent from my underpants using Daz and Lenor summertime
YES :good: without that path touchscreen wasn't working :victory:
hope is not going to mess all up with first update
I really need help. I'm a noob at this. I was trying to install CyanogenMod on my Z1 compact. I was following this guide; "wiki.cyanogenmod.org/w/Install_CM_for_amami" It went well after some trying. Got all the way to step 9! When I pressed Reboot system now nothing happened. The Sony logo game for some seconds, then the screen went black. I know the phone is on 'cause I can see that it is light-black, if you know what i mean. I thaught maby it would take i while. But it stayed like this for 5 hours. Nothing happens.. When I turn it off and on again, I can press the voume rockers and it takes me to the CWM-based Recovery v 6.0.5.1 page where i can do some stuff, but I'm stuck here. Please help me! Dont know what to do. Is there a way to factory-reset the phone back to Anroid? Sorry for being so noob. Need a noob friendly guide on how to fix this
Use the guides and files from this forum instead. Did you flash the CM kernel in fastboot?
at least you can boot into cwm. did you place cyanogenmod zip on your sd card?
XperienceD said:
Use the guides and files from this forum instead. Did you flash the CM kernel in fastboot?
Click to expand...
Click to collapse
"Open a terminal on the PC and enter the following:
fastboot flash boot boot.img
fastboot reboot"
- again sorry, these last 14 hours is the only experience i have with rooting etc. flash means install right?
rzlatic said:
at least you can boot into cwm. did you place cyanogenmod zip on your sd card?
Click to expand...
Click to collapse
i used this "adb push cm.zip /sdcard/0/" - and I checked now. The files is there still yes. Btw, in panic I've "wipe data/facotry reset". Dont know if this matters
"fastboot flash boot boot.img" flashes only the cwm (and kernel). wipe data/factory reset is ok, no harm done (at least now, as you want clean partitions at this point anyway).
so if your zips are on the sdcard via step 8, boot into cwm, navigate to
- install zip (swipe down, swipe right to enter)
- choose zip from /sdcard
- 0/
now you end up on your sdcard. find your zip and run the install. if you copied gapps zip too, install that zip after flashing the rom, and that's it.
llgr said:
"Open a terminal on the PC and enter the following:
fastboot flash boot boot.img
fastboot reboot"
- again sorry, these last 14 hours is the only experience i have with rooting etc. flash means install right?
Click to expand...
Click to collapse
Yes install, I prefer to flash the kernel in fastboot then flash the zip.
rzlatic said:
"fastboot flash boot boot.img" flashes only the cwm (and kernel). wipe data/factory reset is ok, no harm done (at least now, as you want clean partitions at this point anyway).
so if your zips are on the sdcard via step 8, boot into cwm, navigate to
- install zip (swipe down, swipe right to enter)
- choose zip from /sdcard
- 0/
now you end up on your sdcard. find your zip and run the install. if you copied gapps zip too, install that zip after flashing the rom, and that's it.
Click to expand...
Click to collapse
Yes I've come this far. Now I have installed the file i had at the sdcard. "installation complete!" "Good Apps for Android 4.3.3" it says.
Now ive found the cm-11-20140922-NIGHTLY-amami.zip and installed it via sideload.
"opening adbd...
finding update package..
opening updage package.
installing update..."
Dont know how long this take, doesnt say its finished, but i can navigate through the menu at the top, does this means it finished? what to i do now to get i work? just "reboot system now"?
llgr said:
Dont know how long this take, doesnt say its finished, but i can navigate through the menu at the top, does this means it finished? what to i do now to get i work? just "reboot system now"?
Click to expand...
Click to collapse
yes. reboot. see what happens. you should boot into cm already.
you didn't need using so much adb, it's all doable via cwm (except initial flashing of boot.img which is cwm itself).
next time: just download the zip, reboot into recovery, flash the zips there and reboot. it's that simple you don't need to wipe anything between flashing nightlies, but you do between nightlies and M build - or if you migrate to some other aosp/aokp/kang rom. anyhow, have fun.
You want to instal cm right? But do you know that you need to unlocked your bootloader to install any other rom than stok right? So if tou want to have CM you must unlock your bootloader