Hello guy, I'm a glad and happy owner of HTC desire HD, but I have a (quite big) problem:
since some days ago I can plug and use my DHD with my PC with USB Disk mode, normally, but now not! I can't use my DHD in USB mode in any PC, simply takes the "charge mode" and nothing happens, the setting were always the same (ask at the moment of plugging in) but the phone doesn't ask me nothing and stay at the charge mode without any possibility to turn it in USB mode, also after flashing a new ROM (CyanoGen) nothing changed.
any ideas to solve the situation? at the moment I must dismount and remove the SD card prom the phone to transfer some filse /folder from my PC.
thank for the aid.
Bye.
Stefano.
ilmisu said:
Hello guy, I'm a glad and happy owner of HTC desire HD, but I have a (quite big) problem:
since some days ago I can plug and use my DHD with my PC with USB Disk mode, normally, but now not! I can't use my DHD in USB mode in any PC, simply takes the "charge mode" and nothing happens, the setting were always the same (ask at the moment of plugging in) but the phone doesn't ask me nothing and stay at the charge mode without any possibility to turn it in USB mode, also after flashing a new ROM (CyanoGen) nothing changed.
any ideas to solve the situation? at the moment I must dismount and remove the SD card prom the phone to transfer some filse /folder from my PC.
thank for the aid.
Bye.
Stefano.
Click to expand...
Click to collapse
You Should Format your sd card man it should work try in somehow backing up ur important files than format it hope this helped you
thanks man, but I want to notice that I've tried with another SD card, and it doesn't work the same.....
Related
Hey there.
Ok I have a problem. I have had my touch pro 2 for about 6 months now and i am really happy with it, but recently i have ran into a problem.
My phone won't connect to my computer anymore! Not just my computer... no computer at all. Not just activesync, no, it doesn't recognise it at all, not even as a disk drive.
I doubt its the cable because it does charge, and i have tried another cable (not a htc cable but its a cable with the same plug, its from my external harddrive) and it still didn't work.
I also tried a hard-reset on my phone, but still... nothing.
Ive read somewhere that you should push the usb connector a bit up, i did that, but nothing (now the usb connector seems wiggly... glad it still charges though) i have no idea what it could be and i thought i'd post here first before going back to the dealer with it. Because without usb connection i can't install costum roms and that we wouldn't want that, do we?
Well, hope one of you guys can help!
That's very strange I have had it once, but that was due to the rom I used. I flashed another rom and it worked again.
What you could try is to download a new rom and put it on your sd car using this:
http://www.julien-manici.com/windows_mobile_wifi_remote_access/
This let's you put stuff on your mobile using wifi. It's worth a try.
But you have to install roms directly from your pc to your phone, while being connected to USB right? The standards htc roms for example can only be installed that way i think... or can you also copy the .exe to your device and run that?
i'll give it a go when i get home. Thanks =]
I am having the same issue here. All of a sudden my PC or Laptop doesn't see the phone at all but it does charge with no issues. When I plug it in I don't even get the sound that the PC knows something was jut plugged into it.
go to settings - connection - usb to pc - untick the enable faster synchronization box
that should do it
As long as you have Hard SPLed your Rhodium you should be able to use the sd card method to install a rom instead of using the PC and usb connection.
You copy the rhodium.nbh file to the root directory of an sd card formatted FAT32 and then boot into bootloader - volume down and power button when off.
Follow the onscreen prompts...
Cheers...
This sounds familiar - http://forum.xda-developers.com/showthread.php?t=741406
Lennyz1988 said:
That's very strange I have had it once, but that was due to the rom I used. I flashed another rom and it worked again.
Click to expand...
Click to collapse
What's interesting with my Tilt2 (not the OP) was that I wanted to flash my ROM with the new AT&T "unofficial" ROM and that's when I found out I couldn't tether. I basically just wanted to tether my phone so I could put that new ROM onto the phone to see if I could make it more reliable and faster. Sigh.
it actually might be the cord...
The same exact thing happened to me... my phone charged with the cord but no computer recognized it...
I bought a new usb cable from radio shack and viola it worked again... so I advise u just trying a new one and if it doesn't work take it back... but try the unchecking the "check for faster sync" box first like someone said bc that do stop it from being recognized sometimes...
mr_sheen said:
go to settings - connection - usb to pc - untick the enable faster synchronization box
Click to expand...
Click to collapse
Yes, this has (almost) always fixed the issue for me. Somehow WDC becomes blind to new device inserts after you plug-unplug them several times.
Slow but stable is better.
Hello,
My USB connection does not work anymore since r5 MoDaCo.
I still can into recovery mode. I've already flashed the usb update.zip brick, nothing changes.
Charging goes. The SD card is recognized by the phone and I can use it too.
the site of MoDaCo is just down!
Has one of the same problem, or can help me?
i have done the same thing mate was using the usb brick thread no its down im stuck with a bricked phone
flash another rom
naXnoemO said:
Hello,
My USB connection does not work anymore since r5 MoDaCo.
I still can into recovery mode. I've already flashed the usb update.zip brick, nothing changes.
Charging goes. The SD card is recognized by the phone and I can use it too.
the site of MoDaCo is just down!
Has one of the same problem, or can help me?
Click to expand...
Click to collapse
It has to do with the USB Brick, even the SD Card is recognized...
DO you have also troubles when you connect your phone to the power adapter? I mean, when you plugin your phone into the power, does your phone delay a bit (or a lot) to start charging (the orange led doesn't light quickly..)??
If so, then it's a sympthom of USB Brick as I said..
In the thread there are steps for each case of USB Brick...
try again... the last chance is to change ROM or just re-flash the same... some time it helps..
SCesar
is that normal that my desire recognized the sd card, after an USB brick???
i cant access my phone in recovery though usb .no device found
cant use clockwork as it cant mount /dev/block/mmcblk0p1
thanks any way managed to fix it with usb brick thread on modaco
I was trying to put the hum/hiss sound fix on my sd card and I cannot get my pc to connect via USB...
My wife has a TP2 and it connects fine...
I have tried with/without the sd card in, rebooted the pc and phone, rebooted the phone while connected to the pc.... nothing...
wtf...
anyone else with this problem?
PS... NRGZ28 had posted a very basic rom for booting to android back in Feb and it is now gone from hotfile. Anyone know of a quick boot into android?
- Try a different computer
- Try a hard reset
That are the first thing you should do.
Tried hard reset...
Dif PC is not an option at the moment... I have rebooted...
Just flashed the ROM (NRGZ newest, thank goodness I had it on my SD card) and I still cant get it to sync...
I have attached the USB error I am getting... (Win7, new install)
The phone is not asking if I want to active sync or use as storage???? wtf...
FarBeyond said:
Just flashed the ROM (NRGZ newest, thank goodness I had it on my SD card) and I still cant get it to sync...
I have attached the USB error I am getting... (Win7, new install)
The phone is not asking if I want to active sync or use as storage???? wtf...
Click to expand...
Click to collapse
Reboot your PC? lol bet your tried that already...
Try this:
settings > connections > usb to pc > and disable Faster Data Sync then try. This way uses the generic usb drivers and maybe it will connect.
That did not work...
How do I get my Win7 laptop to see the phone with Android on it?
FarBeyond said:
That did not work...
How do I get my Win7 laptop to see the phone with Android on it?
Click to expand...
Click to collapse
dont think thats working yet
Ya I don't think that works yet, it's tied to Android software drivers and the use of the USB port, since there is no drivers to control the port only to charge battery. Windows thinks there is something there, but the phones USB can't communicate back....I think this is the issue or at lease after playing around with it on my phone anyway
Not that it's a huge amount of help but might troubleshoot down to the hardware level...if you go into bootloader mode on the phone and connect to USB does it connect?
I don't think you should go that deep and dirty. My touch pro 2 works only with only 1 (non-HTC) cable of the 10 i have at home, all are the "standard" mini-USB but only one works flawlessly for communicating/flashing/syncing, the other cables either do the same error - device not recognized - or windows says that the device could communicate faster - and only copies files slowly.
All in all: you should simply check with another USB cable or if you have the factory HTC cable try it with that. I noticed that the cable i am using other than the HTC one is a very good quality thick (low-resistance and double-shielded) USB cable and it never failed on me.
One other thing you should definitely watch for: plug the USB cable into the motherboard USB port directly (on the back of the PC where you plug the keyboard, mouse etc.), sometimes PC cases with front panel USB outputs simply die, or are wrongly attached to the motherboard USB header and it can cause the aforementioned problems too, not to mention if it is wrongly attached it could harm your phone too.
Hello guys, just gonna state my problem and ask a few questions.
So, here it is. If I connect my phone to pc/laptop nothing happens, no notifs appear on my phone neither mtp or mass storage. But, when I connect my phone through electricity socket it charges up. Oh, another thing sometimes when I connect my phone to pc/laptop ports it charges up but still no connection to storage/or phone. This just happened last night after from my hospital duty and got home and tried to flash fxp128(love this work) and my phone wont be recognized at all.
So, I've searched up google not that deep but, I found some issues just like mine. Some said its a the laptop problem just need a restart, change cables, remove battery, try in different computer/laptop and etc cases like those. Alreadt tried everthing of those but non seems to work. So, i think my phone hardware(the usb port in my phone) is really the problem. My questions are:
It is repairable?
The repair fee costly or not?
Will this thing will likely come up again?(low chance/high chance of getting this problem again.)
PS: I remember that while on the hospital(free time) i tried to open the rom manager but it fc's when i try launching it.(everytime)
- and my 8gb type 4 sd is broken even through card reader it cant be read. ( dont know what caused this) so i change to class 2 4gb my spare card.
Hope you answer me guys, thank you!
tbh. your phone worked perfectly, and after flashing fxp128 you get problems and directly assume your phone is broken Instead of going back to stock and figure out if it really is.
Usb connection problem could also be caused by not having the com.sonyericsson.usbux "systemapp" or other things.
reply
sashake said:
tbh. your phone worked perfectly, and after flashing fxp128 you get problems and directly assume your phone is broken Instead of going back to stock and figure out if it really is.
Usb connection problem could also be caused by not having the com.sonyericsson.usbux "systemapp" or other things.
Click to expand...
Click to collapse
how can i go back to stock if my phone cant be detected in my computer? can't even go for fastboot and flashmode.
Did you make a NaNdroid back up with CWM? That would be your best bet at this point.
reply
calar714 said:
Did you make a NaNdroid back up with CWM? That would be your best bet at this point.
Click to expand...
Click to collapse
Did have a nandroid backup but on fxp 127. Tried to use it but still no luck. Any suggestions/ideas?
If you're using windows, try to uninstall the portable device at device manager window, while the usb is attached to your phone. Then disconnect the phone after you've uninstalled. After that reconnect it once more and see to it that the drivers are installed properly. It's usually USB mass storage or MTP USB device storage.
Hello,
I still have a problem with pc detecting. I make a picture from my bootloader screen.
I think this is not normal. How is yours?
But in recovery mode the mass storage visible.
That's because you have the usb cable hooked on .... take it off and repeat all precious steps. No such messages again
Mr Hofs said:
That's because you have the usb cable hooked on .... take it off and repeat all precious steps. No such messages again
Click to expand...
Click to collapse
hmmm,it was not pluged in at that time.This happend when i pluged out.
Oke....and what if you enter the bootloader - hboot - recovery without a cable attached from the beginning. Could be bad timing while unplugging it
Mr Hofs said:
Oke....and what if you enter the bootloader - hboot - recovery without a cable attached from the beginning. Could be bad timing while unplugging it
Click to expand...
Click to collapse
Everything as going well, exept PC dosent detect the device
Its any way to put data to the mass storage? If i can put a ROM and installing, i can use the phone without usb connection.
Nah i mean :
Enter the bootloader without a cable connected, hook the cable once you are in and flash the boot.img, unhook it again and enter the recovery and then connect the usb cable once again.....mount the sdcsrd and copy a rom.....install a new rom
Hello everybody. I have next problem: when I try to connect my HOX to computer in mass storage mode, nothing happens on the computer. However on the phone everything goes as it has to go. I have CM 10.2 RC1 installed. And I've noticed one thing: when I get into the fastboot menu and then connect the device to the computer, the phone gets freezed. When I disconnect the device, everything goes well again.
Timofey_K said:
Hello everybody. I have next problem: when I try to connect my HOX to computer in mass storage mode, nothing happens on the computer. However on the phone everything goes as it has to go. I have CM 10.2 RC1 installed. And I've noticed one thing: when I get into the fastboot menu and then connect the device to the computer, the phone gets freezed. When I disconnect the device, everything goes well again.
Click to expand...
Click to collapse
I am glad to tell you that the problem had solved! I did next acts: typed in the command line 'pnputils -e', so I could see all drivers I have installed and their 'oem*.inf' files. I had 4 HTC drivers, it was like they were in a conflict. Then I deleted each driver with such command: 'pnputils -f -d <oem file name>'. So after that, I plugged in the cable and the HOX was recognized by the computer! Please tell me if you had the same problem and it was solved by the method above!
Sent from my HTC One X using xda-developers app