Develop Bugs

[Q] Cannot install Windows 7 64 bit Drivers

I've tried everything I can possibly think of. I have an Asus Laptop with Windows 7 64 bit and absolutely cannot get my Epic to be recognized. I've uninstalled and re-installed the driver more times than I care to mention. I've tried mounting the device to no avail either. I've tried plugging in the phone into each of the USB ports on the laptop to no avail. I need to get the computer to recognize the device so I can get odin to recognize the phone so I can flash back to stock. Right now it doesn't do so. Does anyone have any ideas of what I can do to get this up an running?

Try installing the 32-bit drivers even if you're on a 64-bit computer....

The same issue comes up. It says that the drivers are not successfully installed (even though the installer goes through) and it says "Unknown Device" over and over.

Are you removing previous drivers?
then rebooting before installing new drivers...
also are you using stock cable?
if so buy a new cable you can get cheap ones online for like a dollar just search micro usb cables

Yes, yes, yes. Does the cable really make that much of a difference? I saw that people have had issues but I mean it charges properly all the time so I figured it was ok to use.

Absolutely!!!!!!!!!!!!!!!!!!!!!!!!!!!1
That cable is worthless get a Blackberry cable they are very durable and dependable.
i was having problems also..... all because of the cable.

I'll probably go buy a cable from Walmart, order a cheaper one online from Monoprice and return the other just so I can odin my phone...I really hope that's the issue though.

sporkisfaster said:
The same issue comes up. It says that the drivers are not successfully installed (even though the installer goes through) and it says "Unknown Device" over and over.
Click to expand...
Click to collapse
does it keep looping "unknown device" in the corner, almost like you unplugging and plugging back in repeatedly?
ifso try cleaning the contacts of the usb port on phone and on the small end of the cable.
if not then try totally uninstalling the drivers you installed and if possible when its saying "unknown device" open the device manager, r-click then unistall in there.
USBDview has always been able to dig me out of the home when ive had usb related driver issues... just run it and delete/uninstall anything samsung/android/adb etc related, reboot pc and phone then try again...maybe even redownload the drivers
http://www.nirsoft.net/utils/usbdeview-x64.zip
http://firon.net/xda/usb_drivers_GalaxyS_x64.zip
update (you replied as i was typing): one bandaid for the cable you could try for now is to take a needlenose pliers or something and slightly squish the micro end to try getting a tighter fit.... i had to do that to the cable i keep at work.

You can always just download kies. That's what I did. When I was trying the standalone drivers I had trouble. Installed kies on both of my laptops and coding works beautifully everytime. And I seriously think you guys are ill. Its a cable... its digital. It either works or.it doesn't. I use my samsung wire exclusively. Its thin and I like contour on the plug. Both cables have worked flawlessly on both of my epics.
Sent from my SPH-D700 using XDA App

RushAOZ said:
And I seriously think you guys are ill. Its a cable... its digital. It either works or.it doesn't.
Click to expand...
Click to collapse
You are wrong.
Cables can have breaks in them which give them intermittent connectivity. Also, since this cable has several (5 I think?) single strands of wire in them, a single wire could be screwed up causing this (or the pin for a single wire on either end) That would still allow it to charge, and partially be recognized by Windows, but not allow it to fully communicate causing this problem.
I have a cable that I only use for charging because it has this EXACT problem. Another cable works perfect, but this particular cable gives me the unknown device.

sporkisfaster said:
I've tried everything I can possibly think of. I have an Asus Laptop with Windows 7 64 bit and absolutely cannot get my Epic to be recognized. I've uninstalled and re-installed the driver more times than I care to mention. I've tried mounting the device to no avail either. I've tried plugging in the phone into each of the USB ports on the laptop to no avail. I need to get the computer to recognize the device so I can get odin to recognize the phone so I can flash back to stock. Right now it doesn't do so. Does anyone have any ideas of what I can do to get this up an running?
Click to expand...
Click to collapse
look up and install pdanet. Pick samsung and let it do it's thing.
you're good after that.

Milkman00 said:
You are wrong.
Cables can have breaks in them which give them intermittent connectivity. Also, since this cable has several (5 I think?) single strands of wire in them, a single wire could be screwed up causing this (or the pin for a single wire on either end) That would still allow it to charge, and partially be recognized by Windows, but not allow it to fully communicate causing this problem.
I have a cable that I only use for charging because it has this EXACT problem. Another cable works perfect, but this particular cable gives me the unknown device.
Click to expand...
Click to collapse
Right.. so it either works or it doesn't lol if both cables are in perfect working condition then there would be no issue. Its all preference. I personally use a blackberry micro usb cable. It locks in to the usb port on the phone better. Just so im not paranoid about the wire coming off while flashing... cuz thats bad lol
Sent from my SPH-D700 using XDA App

RushAOZ said:
Right.. so it either works or it doesn't lol if both cables are in perfect working condition then there would be no issue. Its all preference. I personally use a blackberry micro usb cable. It locks in to the usb port on the phone better. Just so im not paranoid about the wire coming off while flashing... cuz thats bad lol
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
I didn't articulate myself clearly, but that is my fault.
If a single wire inside the cable is broken (for the sake of simplicity let's just say it is the RECEIVE cable - from the device to the PC). The PC can recognize that there is a device there, but because the device can't talk to the PC, Windows can tell there is something there, but has no idea what it is since the device can't talk back to the PC. Also, in this scenario the cable would charge just fine since those individual lines are intact.

RushAOZ said:
You can always just download kies. That's what I did. When I was trying the standalone drivers I had trouble. Installed kies on both of my laptops and coding works beautifully everytime. And I seriously think you guys are ill. Its a cable... its digital. It either works or.it doesn't
Click to expand...
Click to collapse
1st off u sir, ARE WRONG.... Maybe when it comes to HDMI Cables but not for these phones.
sporkisfaster said:
Does the cable really make that much of a difference? I saw that people have had issues but I mean it charges properly all the time so I figured it was ok to use.
Click to expand...
Click to collapse
To quote u "Yes yes yes" it does make ALL THE DIFFERENCE... I had the same problem and made serveral posts about it when the phone 1st came out, I tried everything... Uninstalled/Reinstalled/Rebooted many times, Manually deleted the folders where the drivers are held then Re-installed, Installed Kies (which is a P.O.S. and was a BIG WASTE OF TIME imo.) I tried everything and just about gave up until 1 day i looked @ my roomate and asked him 2 let me borrow his cable to his cheap cricket phone 2 see if it would make a difference.
Well it worked... Get a new cable, if you've done what ive done and it still doesnt work, its the cable and not the drivers

I've done just about all I freaking can on this as well.
I've installed, un-installed, and re-installed the drivers. I'm running Windows 7 64 bit on Bootcamp.
I've used USBDView, I've uninstalled all of the connected drivers. They get re-installed, but the phone keeps keeps coming up as an Unknown Device. I try and locate the Samsung USB drivers directory, but it keeps coming up as Unknown.
Does anyone know specifically what directory I should use choose when trying to manually link the driver in Device Manager? I'm having a ***** of a time here.

Anybody have any ideas for me? Thanks.

I had the same problem. Buy a new cable from monoprice. The second I bought a new cable for my 64 bit Asus laptop it worked.
Trust me, buy a new cable.
Sent from my SPH-D700 using XDA Premium App

my solution for odin
sporkisfaster said:
I've tried everything I can possibly think of. I have an Asus Laptop with Windows 7 64 bit and absolutely cannot get my Epic to be recognized. I've uninstalled and re-installed the driver more times than I care to mention. I've tried mounting the device to no avail either. I've tried plugging in the phone into each of the USB ports on the laptop to no avail. I need to get the computer to recognize the device so I can get odin to recognize the phone so I can flash back to stock. Right now it doesn't do so. Does anyone have any ideas of what I can do to get this up an running?
Click to expand...
Click to collapse
I had the same problem. I didn't follow directions to solve my problem in Odin. I had to start Odin and plug my phone in and quickly put the phone into download mode. I did that a few times and finally got it to recognize. With Syndicate, it now recognizes every time. I say that now. LOL

This is how I fixed this problem. After doing all I could think of, uninstall, install, system restore, nandroid restor to when phone was being recognized... all these didn't work for me. I still got the same unknown device in device manager.
The fix: with samsung epic drivers already installed. Turn the phone on, plug into your computer. Let device manager find unknown device. Power off the phone. Boot into recovery. Pc will recognize your phone as samsung android device. Reboot your phone and you should be good to go. Hope this works for the rest of you. Good luck.
Sent from my SPH-D700 using XDA App

boy143878 said:
This is how I fixed this problem. After doing all I could think of, uninstall, install, system restore, nandroid restor to when phone was being recognized... all these didn't work for me. I still got the same unknown device in device manager.
The fix: with samsung epic drivers already installed. Turn the phone on, plug into your computer. Let device manager find unknown device. Power off the phone. Boot into recovery. Pc will recognize your phone as samsung android device. Reboot your phone and you should be good to go. Hope this works for the rest of you. Good luck.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Isn't the original issue that the driver install fails? not that the device isnt being readed?

[Q] Windows 7 Doesn't Recognize my Continuum...

So I'm attempting to root the Continuum, but for some reason the phone won't effectively connect to Windows 7. For example, when I hook the phone up to my Samsung i7 laptop, all the phone does is charge. It doesn't even ask me if I would like to use usb storage or anything. The computer also doesn't recognize the device. Any ideas? Thanks!

A couple questions first:
- Did you install the Continuum drivers?
- Does your phone bring up the USB connection in the status bar?
- Does it bring up the Verizon VCast website on connection?

ExNukeSquid said:
A couple questions first:
- Did you install the Continuum drivers?
- Does your phone bring up the USB connection in the status bar?
- Does it bring up the Verizon VCast website on connection?
Click to expand...
Click to collapse
1. I likely did not install the Continuum drivers, and I have no clue where to get them. I'm assuming Samsung's website, but it's a bit hard to figure out and navigate...
2. My phone does not bring up the USB connection in the status bar.
3. When I go to the browser, it brings up the Verizon website with news, etc.
It should probably be stated as well that this phone is not activated. I am using it on wifi only for the time being because I traded it with a friend for another phone.

Alright, so I've figured it out. Strangely enough, I was just using a generic USB to microUSB cable, and I actually needed to use a Samsung cable. Weird, right?

sportsinger75 said:
Alright, so I've figured it out. Strangely enough, I was just using a generic USB to microUSB cable, and I actually needed to use a Samsung cable. Weird, right?
Click to expand...
Click to collapse
So...now that I'm rooted, how in the world do I install a custom rom? I saw that there's a ClockworkMod Recovery out, but what does "Odin" mean? I'm coming from an LG Optimus V and have extensive experience rooting and installing custom roms and recoveries, but I've never heard of that before. Thanks again!

First, we dont have much for custom roms on this phone. The couple we do have contain fairly well written "how-to's" for them.
Second, if you are not sure, do some research and find out as many answers with the vast pool of knowlendge at your fingertips (the interwebs) as you can. There has already been a swarm of questions asked, and I am sure the answers may already be there for you.
I am waiting for the update and Froyo roms to come out before I bother with custom roms, but I am not holding my breath for that. I will probably be on my next Android phone before I will bother. Modding it up with Widgetlocker, ADW Launcher, and some other goodies at the moment to tide me over.

I had this same problem today. USB mass storage wasn't working, adb wasn't working. I wasn't using the samsung cable, but I can't see how that would make a difference, as the cable I was using has worked for literally a couple dozen different phones from different manufacturers - including other samsungs. I had the samsung drivers installed.
The owner claims that only media sync works on his computer as well, and that usb mass storage has never worked. Anyone have any ideas on how to fix this?

i am also getting this problem. as far as i know i am still using the samsung cable, as normal micro-usb cables dont fit in the continuums port. ill look for another one, but this is quite odd. what i have done (all windows 7 64 bit):
drivers uninstalled
drivers installed
lagfix on
lag fix off
factory reset (within adrenalyne's rom)
i am going to try to transfer the stock rom via bluetooth and see if that works
edit: turns out that isnt possible without odi recognizing the device, which it doesnt (not even in download mode). this is very peculiar
some more information: nothing even shows up in device manager. no unknown devices, nothing. the phone charges, but thats it. i might go to the verizon store and see if i can get another cable

My guess is because you are using a 64 bit version of windows..
Sent from my SCH-I400 using XDA App

I use win7 x64 with odin3v1.3 and it always detects.... I have odin on pc screen with files loaded then I pull bat hold the DownVol button and plug in usb
EDIT: I also have 'galaxy s x64 drivers'...I found em on net sumwhere?
Sent from my SCH-I400 using XDA Premium App

jaizero said:
My guess is because you are using a 64 bit version of windows..
Sent from my SCH-I400 using XDA App
Click to expand...
Click to collapse
Why would that matter at all?

The 64bit version of Windows 7 is notorious for not being compatible with a lot of devices. There just arent any 64bit drivers. If you dont understand how to run your software in the proper compatibility mode you will run into problems. I used the x64 version of Win7 for about 12 seconds after I realized my ancient usb optical mouse didnt work lol.
My advice, try running the Samsung driver installer in compatibility mode and see if that doesnt help.

jaizero said:
My advice, try running the Samsung driver installer in compatibility mode and see if that doesnt help.
Click to expand...
Click to collapse
Compatibility mode won't do anything in the case of drivers. I'm not sure what your issue is though as all of my Samsung phones have been picked up fine from within Windows 7 x64. Is the phone picked up on any non-Windows 7 computer? Have you checked in Device Manager to see if it just needs installed?

its the cable. i took mine to the verizon store, they tested it, and gave me a new one for free. works perfectly now

Excellent, problem solved!

So it turns out a factory reset fixed it. Using a moto cable. So that's definitely not the issue. Flashing froyo now. Thanks!

I have encountered that a few times also. Its weird cuz when I plugged the usb into ac charger it almost immediately asks if I want to mount sd for data transfer. 20 mins later I unplug usb from unit and plugit into my win7 pc and nothin? So plugged back into ac unit and it recognize....so I mounted and it didn't know what to do lol. I then plugged back intopc...waited...changed orientation and 'Boom' pc sees it...in fact I change orientation whenever it seems to hang and seems to work....
sent from my XDA phone - its more than a continuum

I should also note that I have never used a samsung cable and every usb micro I've used (moto,kodak,BB,Lg) has fit and worked. But I have noticed some usb related quirks since froyo update like no lock screen after charging till I push home button, inaccurate batt icon (goes from 3/4 to 1/4 in like 10 mins but overall batt life is same as before)...
On an unrelated note I also can't get v6supercharger to work...?
sent from my XDA phone - its more than a continuum

[Q] Galaxy nexus USB data stopped working (still charges)

My Nexus is stock but it is unlocked.
I have the latest CWM on there (touch 5.8.0.2)
I was currently downloading all the necessary stuff to flash to AOKP but havent even got there yet because all of the sudden my USB isn't working.
I have tried two different cables, the stock one and a different one (both which were working before).
I get charging working through USB but no file transfer.
I just did a wipe data/factory reset and wipe cache via Recovery, and still nada.
Am I cooked here? B-stock with no warranty from Expansys, now currently kicking myself for not buying brand new.
[edit] yes MTP and USB Debug were/are both checked on
[edit2] a lot of my searches seem to indicate that you can move and transfer via adb in recovery or fastboot while having this error. I am not finding that to be the case.
[edit3] windows 7 does not show any indication of a usb drive or anything plugged in as it used to before. This is obviously making it hard for me to try things like reinstalling drivers and whatnot.
thanks

It probably has nothing to do with the USB port...
Plug your phone into your computer, and then scroll the status bar down. You should see a notification "Connected as xx" Select that, then make sure connect as MTP is checked, if it's connected via ptp (camera) it won't allow you to sync files, for what reason so ever...
If that doesn't help, then reflash stock ROM, that usually helps.. With most problems anyway...
If both of these don't work, then I'm sorry, but I can't help you. I'd then call Samsung, and send it in...
LG Simon

Yea MTP was already checked on. USB debugging being on would have auto kicked in as well.
I flashed AOKP but still the same issues. The hardware might have gotten bonked - I hate how fragile these tiny little ports are!
Is there some kind of diagnostic I can run to see if it is truly a hardware issue?

It's the kernel, try another one
Sent from my Galaxy Nexus using xda premium

Just swapped to Faux kernel... still persists.
I'm really starting to think its the hardware but crossing my fingers there's a fix.

the same thing is happening to me, it started yesterday too!
I am on AOKP b-23, Faux kernel....
plug in my usb, it can charge but absolutely nothing happens on the computer side, try it on number of computers too... but the phone is able to charge.
EDIT:
try this:
http://forum.xda-developers.com/showthread.php?t=1400034
or this
http://forum.aokp.co/topic/29-aokp-faq-please-give-me-input-i-update-answers-many-times-a-day/

Mine started doing this. Would charge‚ but sometime I couldn't transfer data or use adb. It seems that the USB didn't like to stay in my computer. Any little movement would unplug it just enough to keep it charging but nothing else.
Sent from my Galaxy Nexus using Tapatalk

I've since tested the MHL cable and also tried using the usb host cable to connect a mouse and both work... does that mean my data connection theoretically could be fine?

I'm using AOKP #23 with Trinity and not had this issue at all. Whether it's because I combine the ROM, Gapps and kernel before flashing I don't know but my phone is running fine

im having this problem as well. does anyone have a solution?

So all you guys that are having problems have enabled MTP through Settings >Storage?
Sent from my Galaxy Nexus using xda premium

Had this same issue yesterday ( phone was 1 day old ) had it plugged into my windows 7 machine and all of sudden the machine couldnt see it. So I wiggled the cable sure enough the computer saw it, jiggled it again and it would lose connection to the PC. Tried this on several PCs with Several cables and same result everytime. If I held the cable connected to the phone at the right angle it would never lose connection.
Ran to Verizon and the numbskull behind counter tried telling me that is normal and I would just have live with it, almost punched him in the throat. Demaded he go get another phone and show me if that one does it. It didnt so he swapped it and was to hasty about it, ended up giving me another cable charger and headphones WOOT WOOT
new phone doesnt do it as of this writing

See http://forum.xda-developers.com/showthread.php?t=1427539 This is probably the issue you guys are experiencing. Seems like you should swap it in or try to fix it yourself by changing the USB charging board.

settings/ storage/ menu button/ usb computer connection/ MTP make sure mtp is checked
this worked for me

Sk00bs said:
settings/ storage/ menu button/ usb computer connection/ MTP make sure mtp is checked
this worked for me
Click to expand...
Click to collapse
i'm an android dev and this has happened to me. really really not good to no longer have adb access to my device. restarted both the phone and computer and tried a different coworker's computer and usb cable with no luck.
i used a samsung usb charger last night which i usually never do (i usually just charge it on the computer) and now this morning i have no data connection.

Hello,
have this problem already on my GNEX. After some reading, i got an idea to turn off Fast Charge in Trickster MOD.
And MTP now working .
Anyway there is an warning about fast charge - " Enabling this will disable access to phone storage" .
Problem solved

Yes, i can't connect mtp too and you rigth..usb fast charging is the problem.
Sent from my Galaxy Nexus using XDA Premium App

kymlalu said:
Hello,
have this problem already on my GNEX. After some reading, i got an idea to turn off Fast Charge in Trickster MOD.
And MTP now working .
Anyway there is an warning about fast charge - " Enabling this will disable access to phone storage" .
Problem solved
Click to expand...
Click to collapse
creco said:
Yes, i can't connect mtp too and you rigth..usb fast charging is the problem.
Sent from my Galaxy Nexus using XDA Premium App
Click to expand...
Click to collapse
Just so y'all know...Fast Charge is simply tricking your phone into thinking it's plugged into an AC outlet...rather than a USB port.
Thus MTP won't work.

same issue here
I'm having the same issue here. Charging works fine with 2 computers and multiple USB cables (as well as AC and car charger adapters), but data transfer has completely stopped working. My computer won't see my phone at all. I have the correct drivers (given that I used them to connect to my computer when I first rooted and unlocked the bootloader). Tried changing the drivers, but I can't get my phone to show up in Device Manager at all. MTP and USB Debugging are enabled.
The only thing I can think of is that I dropped my phone while it was connected, and now the USB cable only charges the phone if I bend it in a certain way (it usually requires upward pressure where the cable plugs into the phone to work). However, other USB charging cables work just fine without any pressure. Is there any chance that a new OEM Samsung USB cable might solve my problem? The other cables I've used weren't OEM.
I normally use a wi-fi data transfer app because the USB data transfer has been slow since day one, so that can be worked around. What IS a major problem for me is that I'm trying to re-root my phone after my root access was lost with the 4.0.4 OTA update. I didn't keep up with the news and only realized last week that my root access had been lost because I tried to do things that required root. Since the OTA update trashed my CWM recovery image, I seem to have no way to re-root and reinstall CWM aside from going back to my computer and doing what I did the first time. But if I can't connect to my computer, I can't do that. It also seems that I would need computer access to remove root in case I bring it back to Verizon for a replacement under warranty.
So on another note, if you guys know of a way to re-root my phone without connecting it to my PC, I'm all ears...

xfighter1188 said:
im having this problem as well. does anyone have a solution?
Click to expand...
Click to collapse
I have run into a lot of USB defects on the phones I have received. It might be wise to get Samsung to repair it, but you will be without a phone for a week. You could also try another cable.
I used to have similar issues except where the power got routed into the data port, frying my phone in multiple areas.
On Samsung's repair ticket they said REPLACED COMPONENT (I'm assuming this is the usb controller and port) this could be the solution but it requires sending it in.

[Q] My Nexus doesn't connect to the PC? Help?

Just came back from holiday so I've got some pictures to store on my computer, but I can't get my phone to connect to it. It charges fine when connected which is also bemusing, since it can't do anything else. It's definitely not my computer's problem as I've tried other computers to no avail. I've been looking around the internet but none of the solutions worked for me.
My Nexus is rooted with stock ROM on 4.2.1 Jelly Bean and hasn't had many other problems in it's lifetime, although sometimes when I go into the Gallery app it will tell me "No external storage available" and I cannot use it until I restart the phone, where the problem diminishes and reappears after a few days. I was wondering if these problems were linked in any way perhaps?
Thanks for any input guys, would really appreciate it

FullSpe3d said:
Just came back from holiday so I've got some pictures to store on my computer, but I can't get my phone to connect to it. It charges fine when connected which is also bemusing, since it can't do anything else. It's definitely not my computer's problem as I've tried other computers to no avail. I've been looking around the internet but none of the solutions worked for me.
My Nexus is rooted with stock ROM on 4.2.1 Jelly Bean and hasn't had many other problems in it's lifetime, although sometimes when I go into the Gallery app it will tell me "No external storage available" and I cannot use it until I restart the phone, where the problem diminishes and reappears after a few days. I was wondering if these problems were linked in any way perhaps?
Thanks for any input guys, would really appreciate it
Click to expand...
Click to collapse
You tried a different USB cable? Just a thought...

Is USB fast charge enabled?

I had the same problem - turns out it wouldn't connect on my PC's front USB ports, but does work on the rear ones.

first be sure that fast charging is disabled, second try other usb port if not try other usb cable if not try another computer, if not...i dont know!

Maybe usb-debugging is on and your PC has a driver Problem with usb-debugging?
Else: Go to device management and look if the device is properly shown also galaxy nexus.
Else2: I don't know. Maybe open the window and throw your PC as far as you can
Sent from my Galaxy Nexus using xda app-developers app

lag3o said:
Maybe usb-debugging is on and your PC has a driver Problem with usb-debugging?
Else: Go to device management and look if the device is properly shown also galaxy nexus.
Else2: I don't know. Maybe open the window and throw your PC as far as you can
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
That cannot be the issue. I did not have USB debugging enabled but I was still able to transfer the files. But, you can try re-installing the Google USB Driver or Samsung Driver for I9250 or was it I515?
Cheers

Check on computer that device is showing in devices and has correct drivers installed. If not samsung official manuals and downloads website (google it) has a driver pack (approx 30mb) which when installed should have every samsung driver you could need, download and run then reboot computer and plug in phone, all drivers needed should now install correctly.
Also check in usb options when first connected that mtp is checked so storage is visible to computer. Best of luck and if all else fails pc out of window sounds like fun
P.S. try flashing latest gapps to fix gallery issue, after dalvik and cache wipe, may solve gallery issue...
sent via xda premium from starkissed noozxoide maguro gnex paranoid beta9.5

One of my nexus 7s doesnt show up on pc?

So, i have a nexus 7 FHD, its rooted with slim rom and it works great. My sister just got a nexus 7, and i rooted it for her with a toolkit, and updated to the latest OTA. The problem is, her tablet is now showing up as a MTP device on my pc, while my nexus 7 is. I know its not the wire because ive tried both my wire and hers with my nexus, and they both have my tablet show up. Furthermore, i see it as a device under the device manager, and my pc makes a sound when it plugs in, but i still cant do anything.
Does anybody know what to do?

Fix the driver that pops up when her tablet is plugged in, don't let windows search for the drive install it manually. A quick search will point you to the correct one. Also best not to use toolkits, if you did this manually my guess is you would have installed all the proper drivers but that's besides the point
Sent from my Nexus 4 using XDA Premium 4 mobile app

abhayy said:
So, i have a nexus 7 FHD, its rooted with slim rom and it works great. My sister just got a nexus 7, and i rooted it for her with a toolkit, and updated to the latest OTA. The problem is, her tablet is now showing up as a MTP device on my pc, while my nexus 7 is. I know its not the wire because ive tried both my wire and hers with my nexus, and they both have my tablet show up. Furthermore, i see it as a device under the device manager, and my pc makes a sound when it plugs in, but i still cant do anything.
Does anybody know what to do?
Click to expand...
Click to collapse
have you activated "Media device (MTP)"?
you can find it under (Settings → Storage → USB computer connection)