Develop Bugs

Parrot CK3100

I have upgraded my MDA PRO with the recent TMobile UK firmware:
ROM 1.20.32WWE
ExtROM 1.20.120WWE
Radio: 1.06.00
I can use my Parrot CK 3100 with it, but my contacts are not synchronized.
Has anyone figured-out how to do it?
Many thanks.

Can't be done automatically (confirmed by Parrot)
You will have to select them one-by-one and then beam to the ck3100
OR: Using PocketInformant which allows you to select all contacts (or a subset) and beam them just with one click.

I have upgraded the Parrot firmware from 1.13 to 1.14b (they mention this release has better synchronization for PDA's with WM5) and ... guess what?
I WORKED!!! My contacts were automatically synchronized!
I repeat: I didn't have to send them one by one nor use Pocket Informant! It worked automatically!
Great!

Well, I have now my contacts synchronized, but after a few days of driving I realize my Bluetooth connection is not stable. My Parrot Partnership is regularly erased after a while.
Is there a Bluetooth patch a have to install? Do I have to upgrade my radio to 1.09, maybe?
Thanks for your help.

How can i disabled Sync ?¿?
Regards

I have the XDA Exec
ROM Version 1.30.107
Radio Version 1.09.00
ExtROM Version 1.30.162 WWE
I too have the probelem of the pairning regularly disapearing - how many others have this problem with the CK3100
I have updated to the latest 14b Flash for the parrot but this does not help.
Im assuming its an XDA Exec issue - does anyone know if O2 will be releasing a new rom with more stable bluetooth in the near future

I have XDA EXEC with latest i-mate ROM (1.30.76 with 1.09.00 radio) and my Parrot synchronizes everything (even the calls registering). No problem with bluetooth (using latest 4.14b).
I installed JetWARE (http://www.jetwaremobile.com/index.htm) and CK3100 gives me also the battery status, the network signal strength and Network name.
The only problem I now have is that I can't use XDA voice dial (using voice command) when I presse CK3100 to make voice dial. It says "connection failure to recogning system". Can someone help me to put this working?

I also have a CK3100 and can sync my contacts, but I seem to loose BT connection every other time I use it.
It seems the Jasjar turns off BT or it just does not show up. I need to go into BT manager and renable BT on the JJ or select the CK3100 and set it as the hands free.
It seems to be different problems, and it is really annoying me.
I am running the CK3100 v14 BIOS and the 1.09 Radio, I might try the 1.11 radio.

parrot3100
I have the same problem. It looks like a program is causing a memory leak or something like that.
RadioROM 1.11.00 is worse (in my case) then v1.09.00. At this moment I have started to rule out installed applications.
I am no shure whether this is caused bij the Parrot since my BT GPS receiver has identical problems.

mda pro loose BT connection with ck3100
Gadget_Junkie said:
I also have a CK3100 and can sync my contacts, but I seem to loose BT connection every other time I use it. ...
Click to expand...
Click to collapse
I have updated my mda pro with the dutch t-mobile rom 1.30.233 WWE. Since that time is sync-contacts working on my ck3100. But I loose BT connection every time I'm using the parrot. I've updated the ck3100-firmware from 4.11 to the newst one version 4.15. Who can resolve the problem.
And how can i stop the automatic sync of the contacts, every time?
Tnx, Lucas

I have exact the same problem with my mda-pro, every time the paring and connection is lost.

Losing BT connection
lkwq said:
... I loose BT connection every time I'm using the parrot. I've updated the ck3100-firmware from 4.11 to the newst one version 4.15. ...
Click to expand...
Click to collapse
Updating the firmware to 4.15b do not solve the problem. Still losing BT connection. Had to wait to 4.16, Parrot said.
parrot.biz said:
... The Next firmware which is 4.16 will be released in a few weeks.
What you can do is :
- Pair your phone using the menu SETTINGS/ADV. SETTINGS/PAIR WITH PHONE/SE
K600,K750 No Sync
- Connect your phone to the CK3100 carkit.
- On the kit, Enable SETTINGS/ADV SETTINGS/OBJECT PUSH/D500, My-X8.
- From Outlook, select the contacts you want to send to your kit.
- Select FILE->SEND VIA BLUETOOTH->Other, Wait for the kit to be detected
by the computer.
- Enter the Pin CODE 1234 when asked, the contact is sent...
Click to expand...
Click to collapse
I hope it works.
Lucas

BT connection problems
The solution is to connect the htc universal with the Parrot ck3100 on this way:
-Pair your phone using the menu SETTINGS/ADV. SETTINGS/PAIR WITH PHONE/SE K600,K750 No Sync.
-Connect your phone to the CK3100 carkit. Code is 1234.
Click to expand...
Click to collapse
Then remains the connection in position.
You can beam your contacts to the Parrot, one by one. Not all your contacts, but only the contacts you need on your Parrot. And no /H/W/M, of course.
So, it all works. Success!
Lucas

Can't connect to Ford Bluetooth handsfree device

Hello,
in a few weeks I'll get my new Ford car - equipped with the built-in bluetooth handsfree device. I tried to connect my MDA 3 to this device at several Ford dealers but didn't get any connection.
The MDA finds a "Ford Audio" but can't establish a connection.
Who has any ideas ?
Thanks in advance - Dieter

I have the same problem with a new mondeo...
Everything works with an old nokia 6630 (with a small nokia application I can browse the phonebook as well) but I'm not able to pair the bluetooth ford audio system with my HTC TyTN...
Any ideas?

try using a newer bluetooth stack.

What is a bluetooth 'stack' ?
And how do I change to a newer one?

nfumbruce said:
And how do I change to a newer one?
Click to expand...
Click to collapse
As far as I know, you'll need to update the Radio portion of your device's ROM based software (the basic software that drives the device).
The best bet in your case I believe would be to just grab a new complete update for your device by searching the wiki for downloads for your device. Download a newer official ROM, install it and try again.
You will lose all saved data on the device though so back it up>
Wiki is here http://wiki.xda-developers.com/

Did upgrading the bluetooth stack fix this connectivity issue to Ford Audio Bluetooth Handsfree devices?

Same problem. I've tried to upgrade bluetooth stack: my BA finds "Ford Audio" but doesn't connect. Please give us some help

bicasper said:
Same problem. I've tried to upgrade bluetooth stack: my BA finds "Ford Audio" but doesn't connect. Please give us some help
Click to expand...
Click to collapse
after correct pairing (code 0000), press "Phone" on the caraudio system and then "Menu". After that press left or right joypad on the caraudio to set the "Active Phone". It will search and your phone will be correctly paired.
The last paired phone will be automatically active when you turn on the caraudio system next time.
In some cases will also help to install on the device the JETware application... just try.

Problem Solved!
Thank you dark horse, followed your advice and it worked just fine. I can now connect via bluetooh in my ford.

Can't connect to new Ford Fiesta
Hello to everyone.
I just bought my new Ford Fiesta and I try to connect it with my Sony ARC S but I can't procced with the opperation. I search for new devise on sony, I find the Ford Audio and ask to connect, the Fiesta get it and provide me with the 4 digit code but, my sony doesn't open any keybord in order to write this code to connect so the after few seconds the car regect the connections.
My phone is ARC S LT18i and I had upgrade it to Android 4.0.3
Please any advice will be helpful,
Thanks in advance.

omg nice on there!!!

Thank you dark horse, i had the same problem!!

OX Mobile Spy
The best bet in your case I believe would be to just grab a new complete update for your device by searching the wiki for downloads for your device. Download a newer official ROM, install it and try again.

Touch Pro 2 - Bluetooth Compatability

I have a compatability problem between my new HTC Touch Pro 2 and my new Volvo XC 60 as detailed below. HTC say the following
The Bluetooth stack refers to the suite of protocols that are compiled to provide Bluetooth functionality. At this time, there is currently no official software available that will correct this issue. It may be possible for you to obtain third-party software
Is there anyone who may know if such a Third Party Software provider who can resolve this, many thanks
Regards
Symptoms of failure of the Bluetooth set up
Does dial out but doesn’t ring inside the phone
Does connect to other end but no voice can be heard at either end
Does download the phonebook
Background
Phone shipped as HTC Touch Pro 2 with Windows Mobile 6.5 – ROM 1.86.401.0 (401 Designates English)
Car delivered as follows Volvo XC 60 – 04.22_R Bluetooth
Phone publicised on Volvo Cars web site as compatible
Firmware must be version ROM 1.19.413.2
Downgraded the phone to ROM 1.19.413.2, phone becomes Swedish + Windows Mobile 6.1
Downgrade the phone to ROM 1.19.401.1 phone becomes English + Windows Mobile 6.1
Without setting up the e-mail the phone becomes compatible with car Bluetooth for voice and phonebook
Setting up e-mail the phone returns to the original issue as per symptoms
Upgrade back to ROM 1.86.401.0 + Windows Mobile 6.5
Without setting up the e-mail the phone becomes compatible with car Bluetooth for voice, says that it downloads the phonebook, but no data is available from car side
Setting up e-mail the phone returns to the original issue as per symptoms
Yesterday upgrade car so that latest version of Bluetooth for Volvo is installed namely 04.23_R
Phone has ROM 1.86.401.0 + Windows Mobile 6.5 installed and email set up, upgrade fails to resolve problem
I hope that this makes sense, if please mail

There are several threads in this forum that provide some answers.
I have a new S80 - experienced the identical problem to yours - and I did the following registry changes:
BlueTooth Fix:
1.Navigate to HKLM\Security\Policies\Policies\
Click "Values" soft-key
Change "00001001" value to 1 (decimal) (recovery note: default is 2)
Change "00001005" value to 40 (decimal) (recovery note: default is 16)
Reboot device.
2. Modify the HandsFree plug-in:
HKLM\Software\WIDCOMM\Plugin\HandsFree
i. Change SupportedFeatures to 45 (default is 1135)
ii. Add value HFBDA binary, set to same value as LastConnectedBda
iii. Add value HFDeviceType decimal 2
3. Modify the WIDCOMM bluetooth general settings:
HKLM\Software\WIDCOMM\BtConfig\General
i. Change bdaddr to (no value)
ii. Change DisableReopenAudio to 0 (default is 1)
4. Reboot device
To find other threads on this forum (and PPC Geeks) search for "Pairing bluetooth with car".

@prubin
you, sir are a genius! I went from having one of the worst wm bluetooth experiences to one of the best! thanks!

Phonebook
Look at this thread if you want the phonebook to work.
http://forum.xda-developers.com/showthread.php?t=591322&page=3
/MrFredd

Touch Pro 2 vs Pioneer Avic x9115bt
I couldn't answer incoming calls. This worked perfectly. Thank you

I have had quite similar problems with my HTC TP2 an a Volvo V50.
Then I found out that there was an update of the BT-software of the car. The Volvo-Service installed the free update of the software in the car. Now it works fine without any problems.

Does Desire have rSAP (VW/Audi/Skoda) Nav

Hi all,
Anyone can confirm that Desire has a rSAP (remote Sim access)?
Some people are saying it doesn't work with their Nav, some say it is working.
Any one got it hooked up to their Vw/Audi/Skoda RNS Nav?
Looking to change from my TouchHD.
Cheers,

Android does not support the SAP/rSAP protocol. It may be that some people have it working on cars that use the HFP or HSP profiles.

Thanks mate, not good at all!!!

A little up now the phone's live...
Does it support rsap? is there any way to push contacts etc...?
I got an audi with a built in Bluetooth system, pairing ok, phone etc ok, but no possibilities with my desire to have rsap working

swissman said:
A little up now the phone's live...
Does it support rsap? is there any way to push contacts etc...?
I got an audi with a built in Bluetooth system, pairing ok, phone etc ok, but no possibilities with my desire to have rsap working
Click to expand...
Click to collapse
I also have the Audi built in BT system, and it works fine except that from what I've read about rSAP, I don't think it's working in that mode with the Audi.
The only difference (problem) I've been facing with my HTC phones vs. Nokia e71 is that the phone ring tone is not pushed to the car speakers when receiving a call. I was hoping it would work with the Desire as the default Audi BT ringtone is stupidly annoying.
Sorry off topic again, but I was wondering, are Bluetooth profiles generally defined by hardware or software? Or some by this, some by that?

Maybe you could check if it has another setting to retrieve data from the phone.
From what i know the new modules used in audi/vw/skoda are Novero modules (part of the nokia business) which only supports rsap.
The older modules are from harman/Becker and do support al the possible connectiontypes.
You can check which type you have under the passengers frontseat, the modules are build in under the seat, not in the radio.
If you have a Novero, tough luck. But you can always check on the local car junkyard if you can find an old car which does have a harman/becker, and build that one in

salahag said:
I also have the Audi built in BT system, and it works fine except that from what I've read about rSAP, I don't think it's working in that mode with the Audi.
The only difference (problem) I've been facing with my HTC phones vs. Nokia e71 is that the phone ring tone is not pushed to the car speakers when receiving a call. I was hoping it would work with the Desire as the default Audi BT ringtone is stupidly annoying.
Sorry off topic again, but I was wondering, are Bluetooth profiles generally defined by hardware or software? Or some by this, some by that?
Click to expand...
Click to collapse
Just wanted to add to eliminate any confusion. I can dial contacts saved on the phone and directly search for them on the car screen. But what I understood is that rSAP profile connects to the SIM card and fully replaces the phone, where it goes into some kind of sleep mode!

salahag said:
Just wanted to add to eliminate any confusion. I can dial contacts saved on the phone and directly search for them on the car screen. But what I understood is that rSAP profile connects to the SIM card and fully replaces the phone, where it goes into some kind of sleep mode!
Click to expand...
Click to collapse
Exactly... you can even read/send sms directly through the display and through your car multimedia system.

Ford
Just a little extra info, Desire now works with the Ford Convers+ system but ONLY on Android 2.1 Update1 (the stock Android 2.1 didn't work).
Just thought that may be why there's mixed reports of working/not working?

Tirinoarim said:
Just a little extra info, Desire now works with the Ford Convers+ system but ONLY on Android 2.1 Update1 (the stock Android 2.1 didn't work).
Just thought that may be why there's mixed reports of working/not working?
Click to expand...
Click to collapse
I got the stock Android and it's showing Android 2.1 update 1.... but not working ;-)

Hmm - well I'm trying to use my HTC Desire with a 2010 Audi A3 with BT and not having any luck so far. Although it paired and transferred the phonebook (took quite a few minutes with a couple of hundred contacts), it's now being really flaky and sometimes just refusing to connect at all. I tried un-pairing/re-pairing but to no avail. It just seems to work sometimes for a bit then stop again. By comparison pairing my Desire with a Jabra BT headset worked fine.
Anyone else having these problems? Anyone know of any updates for the Audi software? (if not I suppose I'll just need to wait for Froyo and hope that it fixes things )

my desire works well with my VW golf.
phone book, calls (dialing and receiving) and status dispay working. not working is SMS

Hey Folks,
there is room for some BT "education", because most people don't know the difference between rSAP and Handsfree.
Handsfree is working like a BT headset - most disadvantage - you are using the phoneunit of your mobile.
rSAP is using BT protocoll to get only the SIM card of your mobile and work together with the phoneunit of your car.
For Audi you can see on which mode your are conntected at the MMI-Display => "SIM card icon" stands for rSAP while "Mobilephone icon" represents handsfree mode.

no rSAP
I could be wrong, but I was of the impression that Nokia had patented the RSAP protocol, so you're not going to see it on non-Nokia phones. Irritating, really. Some car users have retrofitted their handsfree kits with a module that uses handsfree profile with some success but it's not going to use the car antennae etc in this case.

rSAP is a "STANDARD" for bluetooth protocoll in general.
Nokia was one of the first, thatswhy the Nokia unit has some "problems" in early releases....

Well I picked up my Skoda Superb last week, dealer told me they were fitting the new GSM 3 units that had just recently changed, not that it meant much to me.
Anyways it did work fine first couple days then started playing up with not connecting, I went into the options because I found it was connecting to media, but not phone, so I disabled the media option on the phone for the bluetooth connections and its been fine ever since.
Desire running Modaco R4, R5 & R6 now also ok.
Also saw a file posted on there that is meant to fix the iffy bluetooth connection problems, its been confirmed as working but I've not tried it as I've not had any more problems with it.
Will take a look though see if its connecting with a phone or sim card, I had noticed the signal always seemed really good even if the phone was berried in the car somewhere so maybe the rSAP explains it.

Tinyk said:
Also saw a file posted on there that is meant to fix the iffy bluetooth connection problems, its been confirmed as working but I've not tried it as I've not had any more problems with it.
Click to expand...
Click to collapse
Do you have a link to the thread that includes this file by any chance?

Do not mix up android 2.1 and 2.2.
AFAIK the modaco roms are froyo which should have a better bluetooth stack than eclair.

Well some good news! The FroYo/2.2 update on the Desire seemed to do the trick for me and I now seem to be able to get a stable BT connection with my A3. Phonebook transfer working fine too and it's reacquiring the connection when getting back into the car.

Any hope for Android 2.1?
Alanjrobertson: did you say you got your HTC Desire Android v2.1 phone working with your Audi, albeit a bit flaky? I cant get my HTC Desire Android v2.1 phone working with my VW EOS working at all.
What was the process you followed? The process I went through was to turn on phone’s bluetooth and make my phone discoverable. I then initiated a search from the car. It found my phone and displayed the correct name. However, when I chose the “connect” option on the car, it gave the error message: "mobile telephone phone is not compatible" on the car’s MFD.
Is this what you did? Is there a better way of connecting?
The car’s entertainment system is RNS510. I’m not sure if this is associated with Bluetooth or not.
My previous phone (Nokia 5800) worked OK, but my Desire doesn’t.
I am hoping that the Android v2.2 upgrade will fix my problems, but I’m still waiting for the update from Orange. It could take a while by the sounds of things.
I contacted HTC and they told me “The HTC Desire does not have the remote sim access profile. we currently have no plans to update the Bluetooth profiles on the device.” This makes me worried that when I eventually do get the Android v2.2 upgrade it will not work.
Any ideas other than waiting for the Android v2.2 upgrade?

[Q] Holden Cars / Bluetooth and HTC Desire

Hi,
We have a company that is upgrading their fleet of cars to the latest Holden. The new Holden stereo has a touch screen setup that allows pariing with phones via Bluetooth.
I have tested the Android and it pairs fine, and I can make and receive calls.
However it won't allow me to view contacts or make calls from the contacts list.
The Holden Website ( http://www.holden.com.au/owners-info/bluetooth-and-devices/bluetooth-compatibility ) states that this is not possible with the HTC Magic (Android 1.6) but doesn't list any other Android phones. (Window Phones will do PBAP / Phonebook App no problems).
I was just wondering if anyone knows if this is a phone issue, and should work with future updates to the Android's ROM or if it's a Car issue and the HTC Desire will never work with these cars?
OR - is there anything that can be done to get the Android to allow the phones contacts to work with the car?
Cheers
Adam.

OK - Looks like the problem isn't just with Holden.
Came across this thread, and it would appear as though there is a problem with Android and the Bluetooth PBAP protocol.
http://code.google.com/p/android/issues/detail?id=8846