OK...
The locks on my phone are very redundant to say the least.
In order to get to my home screen I have to do the following:
1. Press the button on top of the phone.
2. Slide the first lock down.
3. Draw in my security code to get past the lock out.
Step 3 can be shut on and off but I like this security so people can't mess with my phone. However considering I have to do step 1 before and step two also, it seems a tad over kill.
Can I disable step 2, the slide down lock screen?
Basically when I press the button on the top of the phone I want to be RIGHT at the screen where I draw in my lock pattern and or hit emergency call. I was unable to find anything in the settings. Did I miss it or is it really not there? If it's not there is there any other way to do it?
I'll fully rooted if that helps.
Try "No Lock" in the Market. It gets rid of the lock screen (and has a toggle widget). Not sure the effect on the security though.
No Lock gets rid of both the slide to unlock and the security passcode entry. Very handy if you don't care about security, but you get your mail from an Exchange server and they force you to have a security password.
Don't know how to just get rid of the slide to unlock.
i have a droid incredible with the same setup..sorta...i am running virtuous2.7
have u found a way to do this without No Lock?
You can do exactly what you're asking for with Switch Pro widget
nebenezer said:
You can do exactly what you're asking for with Switch Pro widget
Click to expand...
Click to collapse
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
snovvman said:
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
Click to expand...
Click to collapse
Would like to know, as my buddy was asking me about this.
Sent From My HTC Evo 4G Using Tapa Talk Pro!
If you use cyanogen rom, add power control widget and add the lockscreen option. Any time that widget is off when you hit the power button to unlock the phone you will go straight to pattern lock or home screen if you don't have one.
Sent from my PC36100 using XDA App
I would pay for an app/widget that handled this...
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
deathsled said:
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
Click to expand...
Click to collapse
I'm aware of this mod. People should be aware that you will need root access to delete the file. At the same time, I read that even with the AOSP/standard/vanilla lock screen, it (the standard lock screen) does NOT go away when the pattern lock is ENABLED.
For the Nexus 1, the standard lock DOES go away when pattern is ON, but it does not seem so with the Evo.
Can someone verify/dispute?
Thanks.
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
CzarMatt said:
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
Click to expand...
Click to collapse
Thanks. 1st post for CzarMat!!! Exactly my point--we need to find a way to make the Vanilla lock go away when pattern lock is enabled. But how??
This is all a bit redundant if the OP has Exchange security enabled on his device, which he has yet to clarify (unless I missed something).
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
is there any way to edit or app that enables a longer time period before the lock pattern screen comes up? LIke i think the max is like 15min
I want to be able to at least set the lock pattern screen to a 1hr interval, maybe 2hr
is this possible somehow?
Well, you can hit the "menu" capacitive button instead of sliding for a quicker unlock to the pattern security screen. That's what I normally do since it's a bit of finger acrobactics from the power button->aosp slide unlock->pattern screen.
jaypeezee said:
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
Click to expand...
Click to collapse
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
CzarMatt said:
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
Click to expand...
Click to collapse
Excellent news! Still looking for a solution. I think simulating a "menu" press will unlock the screen. Looking foward to it. Thanks!!
anyone come up with a solution for this?
I really just want the pattern lockscreen, and nothing else. Pattern because I don't want people snooping through my phone, but it's annoying to have to 'unlock' the phone twice.
Has anyone figured this one out yet? There was a post awhile back for the HTC Desire, here: http://forum.xda-developers.com/showthread.php?t=684334 but nobody made any progress...
Had a quick search but couldn't find the answer, is there any way to use Widgetlocker and Face Unlock? It's not that big a deal as i can live without Face Unlock as its really just a gimmick in my opinion but would be nice to have my cake and eat it lol.
I'd like to know the answer to this as well, this would be really cool to have a slide to unlock from ICS and then Face Unlock the phone! In my case, I'd love to add a third step and use the fingerprint scanner on the Atrix to get the phone completely locked down, but that may be asking for too much....
Anyone use both Widgetlocker AND Face Unlock at the same time?
EDIT - for Face Unlock, I've been using the alternative Pattern Unlock when it doesn't recognize my face. When you use Widgetlocker, it typically swipes to unlock and goes straight to the pattern entry. A few times, though, it has fired up the camera and recognized my face to unlock the phone though! How to I get it so it defaults to that automatically instead of the pattern unlock most of the time?
This would be a great idea. May as well use all the features of the g-nex.
any solution here?
This question has definitely been asked before but I haven't found any real solutions to the problem. How can I disable the swipe/drag to unlock feature without disabling the lock screen?
I've already tried NoLock and other 3rd party apps and while they have worked, they all usually disable the lock screen along with the swipe to unlock button.
I've found that when it comes to the Android OS, there is more than one way to do something. Since I have root, is there any file that can be edited to disable the swipe to unlock screen without disabling the pin code/pattern lock?
This has been bothering me for quite a while. I'm really hoping there is some file on the OS that I can edit and disable the swipe to unlock feature.
So, anyone know how?
How the hell are you supposed unlock the screen?? That's my question if your getting rid of the slider/tab what's going to unlock it? I'm lost your question makes no sense...
http://i1202.photobucket.com/albums/bb374/TexasEpic/Biggoron3.png
Sent From My Cyan Samurai
Enabling pin or pattern lock is suppose to disable the stock lockscreen.
Sent from my SPH-D700 using Tapatalk
Big Goron said:
How the hell are you supposed unlock the screen?? That's my question if your getting rid of the slider/tab what's going to unlock it? I'm lost your question makes no sense...
http://i1202.photobucket.com/albums/bb374/TexasEpic/Biggoron3.png
Sent From My Cyan Samurai
Click to expand...
Click to collapse
What this person is asking is if there is a way to disable the screen with the time/date that says "Swipe screen to unlock". If you have a security lock screen with pin, pattern, etc or an application like "Go Locker," you still have the annoying "Swipe screen to unlock" that displays first. You have to swipe it on that screen, and then you are on the next Lock Screen to enter your pin, pattern, etc. It is two layers of protection. Many people are finding the "Swipe screen to unlock" annoying when they have a security screen that is also configured.