Buy HTC Vogue Clean ESN CDMA Set to eaby.com . & how to Use This Phone In India in CDMA Network. pls tell
I m read another Indian forum. HTC 6800/6900 convert to tata CDMA
here is detail
SID, NID, Primay Channer A & B, Secondary Channel A & B loaded Nam 1 & Nam 2 PRL, SPC = 000000
I got all above Parameter from Tata Customer Care and they told any Foreign ESN Handset can work if you are able to change the above Parameters, After that I Get an GSK (Getting Started Kit) of Tata which have 14 Digit Activation Number, then Dialed *228 and followed the Instruction, After 2 Hours (Tipical 10 Minutes they say) Received a SMS to Restart the Phone. Voila my HTC Mogul is Working on TATA
Will load my QPST .qct file (Ready made Setting for TATA) so every buddy can easily Activate Mogul on TATA
Everybody now Welcome to World of Tata Indicom
( Attached TATA.rar contains Nam1 PRL, Nam2 PRL, and Ready made QCN file for QPST Service Programming, also have GetSPC [ Run in PPC6800 / Mogul Type the ESN in Capital and get the Service Programming Code] )
Pls Help me
Sounds interesting but I'm just wondering
OK.... can u explore more on that.
How does one go about creating/editing the PRL settings contained here if they want to use this thing on a different network than Tata?
thx
This method work on Cricket in USA and in TATA in India
Just follow the Process and Activate using *228 Loading TATA Prl is needed or else it will not catch TATA Tower range.
Go on and take it into TATA
I already have activated so many Phones
Both Cricket and TATA accept non Allocated ESN and Activate the OTA and INsert the new ESN against users Services, Here in India Reliance dont activate any phone which ESN is not pre Registered in Reliance Network
I was wondering if this will solve my issue. I have bought a touch with a bad ESN and is unable to put it on my account. Will this clear the ESN?
I used this ..so easy
so if you activated your phone for india service, would you be able to use it in the United States?
--James
I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no problem.
The steps are simple:
Here is what you need to do:
1. Download GetSPC(attached below)
2. Unzip to desktop
3. Turn off phone and remove battery.
4. Write down your HEX ESN
5. Power your device back on
6. Connect via ActiveSync or WMDC
7. Copy entire folder to main memory on device.
8. Run GetSPC.exe
9. In the top box type in your HEX ESN(make sure caps is on)
10. Click generate or whatever the button is named
11. The resulting number should be a 6 digit number, your MSL, write it down.
12. Search for, download and install Qualcomm's QPST tool.(not freeware)
THE FOLLOWING STEPS ARE VERY DANGEROUS SO MAKE SURE YOU FOLLOW MY DIRECTIONS EXACTLY.
13. Run QPST Configuration(run as admin if Vista)
14. From the Dialpad, dial ##3424#(##diag#)
15. Connect device to computer via USB(this will install drivers)
16. In QPST Configuration, click ports.
17. Continue to add ports until the QPST Configuration detects your phone
18. Under active phones it should display your phone.
19. Click Start Clients/Service Programming
20. Select phone and click ok.
DO NOT LEAVE FIRST TAB, THE SETTINGS TAB. THIS IS THE ONLY TAB WE WILL NEED TO CHANGE ANY SETTINGS
21. Under the settings tab, click Read from phone.
22. Input your MSL you got from GetSPC earlier.
23. Under codes where it says Service Programming, change this to 000000
24. Click Write to Phone
25. Wait 1 minute
26. Close Qualcomm QPST one window at a time.
27. Disconnect the USB cable from your device
28. Perform Soft reset once
29. Test new MSL(##000000#)
30. If new code does not go through, hard reset.
31. Depending on what device you have, follow the necessary steps to unlock your phone so you can flash a new ROM to it.
32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.
33. Follow instructions to flash new OS to device.
34. Call service provider and do some sweet talking to get them to activate the phone on their network. You may need to do some serious sweet talking because Sprint ESNs are not in Verizon's database and vice versa. This goes for all CDMA carriers.
Good luck.
dharvey4651 said:
I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no carriers.
Good luck.
Click to expand...
Click to collapse
are u then able to have both NAM1 & NAM2 on the phone?
NAM
You have to enable dual NAMs through the registry. And use QPST or CDMA Workshop to set them up.
Thanks a million time to Shadomite
He had Cracked and changed the ESN
I have POsted the Simplified Method Just have a look
http://www.mobile-files.com/forum/showpost.php?p=355534&postcount=82
Quick question. Is there any chance of doing something similar to a Verizon World Edition Blackberry? I live in Ghana and i have had a few of these on my table in the last few months. Any ideas?
''Originally Posted by dharvey4651''
32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.''
What information i need from my carrier to build my own rom and how can i make it. Is there a way to build a rom and make a CDMA phone to work in Europe?
I have an HTC TOUCH CDMA ver in Greece!
Help..
Having HTC P3050
you have given the file i have downloaded it but now how to use it and activate on tata can u help me
Need English Viva ROM for Vogue (MP6900SP)
Thank you for this great post. I followed the instructions without bricking my phone. I looked at the 'simpler' one linked to here, but found the one on this thread much easier to follow and use.
Now all I need is the ROM for Viva (North America or Carribbean). Where can I find this? Thanks,
WMT
Hey Hetal
can't find your post on mobile-files.com. Is there any other link.
Will this method work on reliance network too???
Thanks
puneet_july30 said:
Hey Hetal
can't find your post on mobile-files.com. Is there any other link.
Will this method work on reliance network too???
Thanks
Click to expand...
Click to collapse
Mobile-Files was taken down a few months ago.
dharvey4651 said:
I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no problem.
The steps are simple:
Here is what you need to do:
1. Download GetSPC(attached below)
2. Unzip to desktop
3. Turn off phone and remove battery.
4. Write down your HEX ESN
5. Power your device back on
6. Connect via ActiveSync or WMDC
7. Copy entire folder to main memory on device.
8. Run GetSPC.exe
9. In the top box type in your HEX ESN(make sure caps is on)
10. Click generate or whatever the button is named
11. The resulting number should be a 6 digit number, your MSL, write it down.
12. Search for, download and install Qualcomm's QPST tool.(not freeware)
THE FOLLOWING STEPS ARE VERY DANGEROUS SO MAKE SURE YOU FOLLOW MY DIRECTIONS EXACTLY.
13. Run QPST Configuration(run as admin if Vista)
14. From the Dialpad, dial ##3424#(##diag#)
15. Connect device to computer via USB(this will install drivers)
16. In QPST Configuration, click ports.
17. Continue to add ports until the QPST Configuration detects your phone
18. Under active phones it should display your phone.
19. Click Start Clients/Service Programming
20. Select phone and click ok.
DO NOT LEAVE FIRST TAB, THE SETTINGS TAB. THIS IS THE ONLY TAB WE WILL NEED TO CHANGE ANY SETTINGS
21. Under the settings tab, click Read from phone.
22. Input your MSL you got from GetSPC earlier.
23. Under codes where it says Service Programming, change this to 000000
24. Click Write to Phone
25. Wait 1 minute
26. Close Qualcomm QPST one window at a time.
27. Disconnect the USB cable from your device
28. Perform Soft reset once
29. Test new MSL(##000000#)
30. If new code does not go through, hard reset.
31. Depending on what device you have, follow the necessary steps to unlock your phone so you can flash a new ROM to it.
32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.
33. Follow instructions to flash new OS to device.
34. Call service provider and do some sweet talking to get them to activate the phone on their network. You may need to do some serious sweet talking because Sprint ESNs are not in Verizon's database and vice versa. This goes for all CDMA carriers.
Good luck.
Click to expand...
Click to collapse
Thanks a ton, I have completed all the steps 30, now how can I run the other network on my phone.
Do I have fill all the network details in the QPST Config step..???
that's great thank you man
Thank you. it was more then easy.
Now it works.
help me
How can I use this file for my HTC Hero CDMA? this QCN file giving error.
help me.
I have a Samsung Intrepid (Sprint) with WM 6.5 stock on it. I grabbed a copy of EPST and put on the device. When launched, it asks for the MSL code, so I enter my MSL, but it continues to say invalid code.
I have verified I can get into the ##DEBUG# menu using the MSL number, and I can also get into the phone number programming by hitting ##MSLNUM#. Any ideas why EPST is giving the invalid lock code message?
Thanks for any help!
Got what I wanted taken care of. Since EPST wouldn't work properly, I was able to devise a workaround:
##UPST#
Change the port to: Modem and Diagnostic
Reboot phone.
Fire up QPST configuration dialog.
Add COM port to the config.
Open QPST- should detect the appropriate chipset.
Read from phone.
Update values as you desire. I changed the Slot Cycle Index to 1.
On th System tab I set the below values:
Preferred Mode "Automatic"
Band Preference "Cell Only"
Roam Preference "Automatic"
Sprint only has PCS coverage here and it sucks, so I use this to roam. Maybe this will help someone else.
THIS IS FOR EDUCATIONAL PURPOSE ONLY
Guide on Flashing HTC Droid Incredible to Boost Mobile
What you NEED
QPST
QXDM 3.11 (Google is your friend)
CDMA Tools 2.7 (Demo is good too)
Patience
HTC Diagnostic or HTC USB MODEM Drivers (I will include Win7 x64 Driver)
Donor Phone Driver (Google is your friend)
Winhex (Again, Google )
Boost Mobile Account [seems difficult for those without it]
What you DONT NEED
Wife
Kids
*Install all drivers and programs**
If you do not know how to manually install a driver, I suggest you stop where you are now.
Step 1: Donor Phone MSL/SPC
This one is really simple, call Boost Mobile Customer Rep. (To get directly to them after the guy says "For espanol press 5", just press 5, then press 2, and wait for it to ask you "To chat with a Boost Customer Rep press 0") and tell them your phone needs to be programmed and they will tell you to dial ##MSL#. SAVE THAT NUMBER and then just hang up on them.
Step 1.5:
Incase you are scared to talk with boost mobile, or you don't know your 6 digit MSL/SPC code you will have to find it manually. *Sigh*
Open QPST, click [Add New Port] on the bottom right, then uncheck [Show serial...] on the bottom left corner and on the screen to the left you should see your Donor's Port number, add it and make note of it.
Next open CDMA workshop, connect to your phones Port (COM) number, click read and your phone information will be displayed on the left.
Click on the memory tab, under memory/Eeprom put start Address: 0363:0000 leave the size at 65536 bytes, now click read and save the .bin files on your desktop.
FINALLY, open up Win Hex, open the memory file you just saved, click on specialist- Gather Text; Recognize text by "6" uncheck everything expect for " Numbers" press "OK", save the file anywhere you like. You should end up with a .txt document with 1 or more 6 digit numbers; one of them is the SPC for your phone, write it or them down.
Step 2: NV Items
Open CDMA Workshop again, go to Security under SPC write your MSL code and click SPC -> Send. It should say phone is unlocked.
Now go to Memory tab, and click Read NV_Items, and you will read NV_Items 455, 466, 1192, and 1194. Save them all.
Step 3: NAM 1 & 2
Stay in CDMA Workshop, and click the NAM Tab. Click “Read” this will display all your phones information inside of “NAM 1” Save the filename as NAM 1 and do the same for NAM 2.
Step 4: M.IP
Close Cdma Workshop. Open Service Programming and enter your Donor phones SPC. Click Read and navigate to the “MIP” Tab, we need your Donor phones NAI. Click on Profile 1 and copy down everything just to be safe. Do the same for Profile 0 if available.
Step 5: HA & AAA Passwords
HA Password for both Profiles will be "secret" in text formatClose Service Programming and open QXDM. Now in the Command Prompt on the top screen type in "SPC [MSL]" Then type in “Requestnvitemread ds_mip_ss_user_prof 1” to retrieve your Profile 1 AAA 6 Digit password. It will be the first 6 Digits in DIAG RX, which is written in HEX mode. For Profile 0, simply open NV_Item 466 all numbers after the number 10 and before the last pair of 0's will be your Profile 0 AAA. Or you can type in QXDM Requestnvitemread ds_mip_ss_user_prof and it will be all the Digits in AAA SHared DIAG RX.
If it says Access Denied it means you do not have a Profile 0. *Dont worry about it*
DONT EVER TURN ON THE DONOR PHONE'S RADIO AGAIN, PUT IT ON AIRPLANE MODE OR SOMETHING
Step 6: Root your HTC DROID INREDIBLE
Follow directions --> http://androidforums.com/incredible...ked-3-rooting-stock-incredible-evo-2-2-a.html
Step 7: Writing NAM and NV Items
Plug in your Droid Incredible to the PC. Open QPST and add its port number. Open CDMA and connect then read the Incredible, next go to Security Tab and under SPC write 000000 and send SPC.
Next go to the "Memory" tab, NV Items and write the 4 NV Items we saved from your donor phone earlier.465, 466, 1192, and 1194. Then navigate to the “NAM” TAB and Write the Nam 1 and Nam 2 Files we saved earlier by clicking Load before each on of them. If done correctly it should display your donor’s phone number and other information.
TYPE IN ##DIAG# IN YOUR DROID TO GO INTO MODEM MODE
Step 8: Zero'ing ESN & MEID
Close CDMA Workshop and open QXDM, Options- Communications- Target Port/ select your Droid Incredible's Port, click OK. You should now be connected to your phone. (if you have any trouble connecting to QXDM make sure you set your com port in QPST Configuration and use the same in Qxdm's communications, So you can actually see what's going on from the View drop down screen, select Command Output. Press F4 to get to the memory view, Change Rows from 8 to 16, Find you HEX MEID and ESN by calling ##786# it will look something like this...
MEID: A1000009C57FQZ
ESN: 8373B5C5
They might have an "0x" in front of them, just ignore that, Now pay close attention, following the example MEID and ESN I provided above you are going to separate every 2 characters and then you are going to flip a few to make it backwards just follow my model and do the same to your numbers.
Original: Separated: Flipped:
MEID A1000009C57FQZ MEID A1 00 00 09 C5 7F QZ MEID QZ 7F C5 09 00 00 A1
ESN 8373B5C5 ESN 83 73 B5 C5 ESN C5 B5 73 83
*Note* Your Meid and Esn will differ from the one used in this guide please find your own and use the same method you will need this to find you Meid and Esn in the memory.
Now the tricky part, you may have to Zero them out several times so it will stick (I would consider zero'ing them several times before restarting the phone)
These are all possible ESN and MEID Locations, [ATTACHED]
At each location, find your Meid or ESN and replace it with Zeros (0) then click Write and goto the next Meid or ESN. Do not alter anything but meids or ESNS. After you Zero'ed them out type the command "Requestnvitemread MEID" and "Requestnvitemread ESN". If its Zero'ed restart the phone, if its not, you missed a spot.
To make sure its been Zero'ed out FOR SURE restart the phone and when is back on dial ##778# click View, then Display and make sure your MEID and ESN is all 0. If its not, then try again.
Step 9: Writing MEID
After you get a message that it's zero than u can proceed to write your ESN or MEID which ever you prefer.
Commands are
requestnvitemwrite scm 0x3a
requestnvitemwrite meid 0x0(Your MEID)
MEID = actual 14 digit meid (not in reverse)
If u are writing MEID no need to write the ESN.
requestnvitemwrite esn 0x(Your ESN)
esn= actual 8 digit esn (not in reverse)
Step 10: Configuring Data
Close QXDM, open Service Programming. Navigate to the M.IP tab.
3G Donor PHONES ONLY: Click profile 0 and click edit. Check and make sure your “NAI” is the correct one for boost mobile. Enter your HA Shared password first, then enter your AAA Password into the text box, next Enter all information that you saved earlier and put them in the required box’s. (it may be different for your area)
NAI:[email protected]
Home address: 0.0.0.0
Primary HA address: 68.28.15.12
Secondary HA address: 68.28.31.12
SPI: 4D2
SPI: 4D2
Rev Tunnel Preferred: Checked now with both passwords hit ok.
Enter your HA Shared password first, then enter your AAA Password into the text box, next Enter all information that you saved earlier and put them in the required box’s
NAI:[email protected] (May varie)
Home address: 0.0.0.0
Primary HA address: 255.255.255.255
Secondary HA address: 68.28.89.76
SPI: 4D2
SPI: 4D2
Rev Tunnel Preferred: Checked now with both passwords hit ok
Make Active User 1.
Write to phone, and restart the Droid Incredible.
Now give yourself a pat in the back because you just Fully Flashed your Droid Incredible to Boost Mobile
I have yet to Know how to configure the USE of MMS, but if you know how to drop it in here .
***THIS GUIDE WAS TAKEN FROM A GUIDE I BOUGHT ON EBAY FOR FLASHING HTC EVO TO BOOST MOBILE, AND MODIFIED TO FIT THE HTC DROID INCREDIBLE***
Any questions?
EDIT** Incase your Data isnt working try this and MAKE SURE, you have this.
1. Make sure your ACTIVE USER is 1.
2. Make sure your HTC INCREDIBLE has the same PRL as your donor phone! (THIS IS HIGHLY IMPORTANT) To extract the PRL from your donor phone simply:
Connect your donor phone, Open 'Service Programming' click 'Read from Phone' enter your MSL, and then click 'Save to File' save it anywhere. You will get a qcn file, and a rl0 file. The 'rl0' file will be the PRL.
Also this happened to me before, lol, MAKE SURE MOBILE NETWORK in 'Menu -> Settings -> Wireless and Networks is TURNED ON !!
Any more questions let me know
UPDATE: Try this by igotanmp3 to get MMS working. NOTE* It does not work with Custom Themes http://forum.xda-developers.com/showpost.php?p=16440594&postcount=69
UPDATE: For Droid Incredible S & 2 FOLLOW --> http://forum.xda-developers.com/showpost.php?p=21668680&postcount=145
So did you ever figure out the mms settings? I've seen some guy in New Jersey doing full flashes on HTC Incredibles on Boost Mobile. I tried to contact him, but it seems like he is somewhat of a prick. I've been racking my brains trying to get the mms working. So far my Dinc has talk, text, internet and Sprint TV working.
I have not yet. How did you get Sprint TV running on the Incredible though?
And i think the guide to flash a HTC Hero to alltel i believe might help... changing the APN username adress and whatnot with APN Manager apk, havent gotten around it though been too busy will try tomorrow.
Sent from my ADR6300 using XDA App
eljean said:
I have not yet. How did you get Sprint TV running on the Incredible though?
And i think the guide to flash a HTC Hero to alltel i believe might help... changing the APN username adress and whatnot with APN Manager apk, havent gotten around it though been too busy will try tomorrow.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I downloaded the Sprint TV Apk file and that was pretty much it
TRY THIS FOR MMS
MMS
************************************************** *******************************
(My original work)
After making sure web works,
1. Download APN Backup & Restore(Android Market)
2. Click Backup APNs
3. Goto your sdcard/ApnBackupRestore
4. Click the apn file and edit under windows or on your phone.
5. Look for the line that says Production and edit.....
<apn name="Production" numeric="00000" mcc="310" mnc="00" apn="1"
user="[email protected]"(may varie) server="null" password="null proxy="null"
port="" mmsproxy="" mmsport="" mmsprotocol="2.0"
mmsc="http://mm.myboostmobile.com" type="mms" />
6. Save the file(make sure you save it)
7. Open the APN Backup & Restore program
8. Click delete APNs(Very important)
9. Click Restore APNs
10. Close the program
11. Goto messages>menu>settings>connection settings. Make sure everything is as you edited. You should see Name(Production), MMSC(http://mm.myboostmobile.com), MMS proxy(not set), MMS port(not set), MMS protocol(WAP 2.0).
12. If everything is just as it is, viola you are all set...
Taken from http://www.howardforums.com/showthr...lashed-to-Revol-with-working-Internet-and-MMS and fixed to the Boost Mobile apn settings... correct it if its wonrg, Im not 100% sure on the settings...
I haven't tried it yet im still waiting for my MicroSD Card from Ebay :\... lol you be the guinnea pig let me know how it goes
this would go a lot better in the dev section
JoelZ9614 said:
this would go a lot better in the dev section
Click to expand...
Click to collapse
Ahh, I didnt know where else to put it
this is awesome.. what about PTT? does it work?
remy2501 said:
this is awesome.. what about PTT? does it work?
Click to expand...
Click to collapse
Yeah it should
DRIVERS
FORGOT to attach the DRIVERS sorry
Any possible way to go back to verizon MEID?
mttmelton said:
Any possible way to go back to verizon MEID?
Click to expand...
Click to collapse
Just write the original MEID and the phone would provision itself IF it has a clean esn
Sent from my ADR6300 using XDA App
Still no mms on the HTC Droid Incredible on Boost
Just wonder if anyone has figured out the mms settings for the HTC Droid Incredible on Boost Mobile. I paid some guy on Ebay and he emailed me back "here sorry all you do is this:
##3282#
change mms "hxxp;//mm . myboostmobile . com
reboot your phone and test the pics"
I was like WTF ##3282# does not even work on the Incredible, but I already knew the mmsc url. So has anyone figured this little speed bump? I have talk, text, internet & sprint TV working now I just need mms working.
roclikewhat said:
Just wonder if anyone has figured out the mms settings for the HTC Droid Incredible on Boost Mobile. I paid some guy on Ebay and he emailed me back "here sorry all you do is this:
##3282#
change mms "hxxp;//mm . myboostmobile . com
reboot your phone and test the pics"
I was like WTF ##3282# does not even work on the Incredible, but I already knew the mmsc url. So has anyone figured this little speed bump? I have talk, text, internet & sprint TV working now I just need mms working.
Click to expand...
Click to collapse
Same here. I used APN Manager and changed the mmsc url but then it would just give me access denied.
Sent from my ADR6300 using XDA App
Hello,
I read all posts above, but I couldn't understand completely. It is possible use htc incredible 2 on boost mobile?
I can buy one from ebay with clean esn and use it on Boost mobile?
thank you
idk
mttmelton said:
Any possible way to go back to verizon MEID?
Click to expand...
Click to collapse
to be honest with you, I am not entirely sure, theoretically it should be possible but at this moment I do not know since it is a new phone with new software etc etc. And I heard HTC is starting to lock their esn locations with some type of encryption so u cant read it.
Google around u might be able to and if u find someone who says and has backup that is possible come back to this guide and follow it .
for example. Can I activate this on boost mobile?
hxxp://xpressphones.vstore.ca/product_info.php?products_id=379
armars said:
for example. Can I activate this on boost mobile?
hxxp://xpressphones.vstore.ca/product_info.php?products_id=379
Click to expand...
Click to collapse
I did a little bit of research and so far I can conclude that it is not possible. I may be wrong though. I am 90% positive it is not posible YET lol
***THIS GUIDE WAS TAKEN FROM A GUIDE I BOUGHT ON EBAY FOR FLASHING HTC EVO TO BOOST MOBILE, AND MODIFIED TO FIT THE HTC DROID INCREDIBLE***
Click to expand...
Click to collapse
So you could flash it to boost mobile, but couldn't activate?
armars said:
So you could flash it to boost mobile, but couldn't activate?
Click to expand...
Click to collapse
Yeah if your donor phone is already activated