Does anyone know how to use this app or where to find it as a stand alone, adjust it, you tube video? toturial? I want to overclock my sgs 2 to 1.5 ghz, and according Melvin you should only use deamon with beastmod 5.0
robandcathy said:
Does anyone know how to use this app or where to find it as a stand alone, adjust it, you tube video? toturial? I want to overclock my sgs 2 to 1.5 ghz, and according Melvin you should only use deamon with beastmod 5.0
Click to expand...
Click to collapse
The app comes with the rom ..oc/UV beater
Thanks but still does not answer, my understanding is I have to add it in. I know how to flash, use CMW etc, but really cannot find much info on this. Where to get it, how to install and most of all how to use.
robandcathy said:
Thanks but still does not answer, my understanding is I have to add it in. I know how to flash, use CMW etc, but really cannot find much info on this. Where to get it, how to install and most of all how to use.
Click to expand...
Click to collapse
The daemon is already part of the biild props so just go into the app oc beater and set your oc the hit set perm..if I can remember correctly it won't let you set voltages. If you use a diiferent rom yoj do have to flash the daemon script seperate but with the new beastmod melvin already put it in
Related
I've used SetCPU in the past and have determined that my max stable clock speed is 113600; I've also read that using SetCPU to control clock speed can create some problems.
How would one go about manually overclocking the phone without using SetCPU? I was looking around in /sys/devices/system/cpu/cpu0/cpufreq and it looks like there are kernel settings there, just want to make sure I don't bork anything in the process
Thanks in advance!
From my understanding is that if you get an overclock kernel it will basically run in the same fashion as your current kernel (as far as governing speed goes) except you'll have a higher max frequency.
Rrrracer said:
I've used SetCPU in the past and have determined that my max stable clock speed is 113600; I've also read that using SetCPU to control clock speed can create some problems.
How would one go about manually overclocking the phone without using SetCPU? I was looking around in /sys/devices/system/cpu/cpu0/cpufreq and it looks like there are kernel settings there, just want to make sure I don't bork anything in the process
Thanks in advance!
Click to expand...
Click to collapse
SetCPU is the GUI to do what you are talking about... Are you looking to go past 1.113? I can only get to 1.113, but if I run Hyrda's OCOV kernel I can get to 1.15.
I would say if you don't know what you are doing, I wouldn't mess with it. Nandroid is handy if you do.
I'm running invisiblek's #16 kernel but max clock speed is showing 998. Not trying to go over 1.13 but thought I read somewhere about being able to manually change it in the system files somewhere without using SetCPU.
IIRC the idea was to use SetCPU to determine your max stable clock speed, then change it manually in a system file somewhere and then not use SetCPU.
Sent from my ADR6300 using XDA App
Try uninstalling/reinstalling setCPU. I've had issues every once in a while when flashing a new ROM, then doing the app only restore from a TI backup cause issues.
Personally I can't say I've ever had any problems using SetCPU, but if there's a way to make it default to 1.13 without having another process running then I am all for it, thus my question. Just don't know where to change it
I can tell you i am 99.9% sure that you were right with the file location in your first post.
If you check chads thread SOMEWHERE in there i think its mentioned... Sorry to say but i have no idea where.
Here's a script that Ziggy wrote, you can edit it to your needs and flash it and fix permissions. Without editing it's set at 1.113GHz Interactive screen on and .384GHz Ondemand screen off if I remember correctly. It also has another tweak (memory management I believe?). But hey, it's a start.
Much appreciated guys, I will check out Chad's thread again and look at that script. I just don't see the need for SetCPU if I can just plug in my known stable values and roll it like that Thanks again!
Fixed lol sorry
Sent from my Droid Incredible running Myn's Warm Two Point Two RLS4.
LOL Blah! :-D
I have tried editing those files and it does not seem to change the clock speed. Anyone who has successfully done it manually could you please list all the specific files. Also im going to examine the script that was linked and see if i can tweak it a bit. Ill post any findings here.
I use the custom kernel #18 and setcpu, clocked to 1.115 easily with cm6.1. works awesome and smokin fast.
trunksta said:
I have tried editing those files and it does not seem to change the clock speed. Anyone who has successfully done it manually could you please list all the specific files. Also im going to examine the script that was linked and see if i can tweak it a bit. Ill post any findings here.
Click to expand...
Click to collapse
I edited Ziggy's script using EditPad lite (free, just Google it) since I'm on Windows so as not to change the format. Flashed from recovery then fixed permission in Root Explorer. Worked like a charm.
I'm using the virus rom airborne rc6 and the netarchy 4.3.4 kernel. I went to the app market and downloaded the overclock widget since I had used it on another evo. Whenever I set it up or go to set it up I should say the phone locks up and requires a battery pull. Start the phone back up and it freezes again on the lock screen not allowing you to use it. A restore or wipe is required. I was thinking it was the Rom or kernel so I downloaded valpeak Rom and a kernel and it did the same thing on it. Just wondering if anyone had heard seen or experienced something like this before ? Is there another over clock program that's good and stable ?
Thanks in advance
Virus Rom airborne rc6
Netarchy toastmod kernel
jshaddix865 said:
I'm using the virus rom airborne rc6 and the netarchy 4.3.4 kernel. I went to the app market and downloaded the overclock widget since I had used it on another evo. Whenever I set it up or go to set it up I should say the phone locks up and requires a battery pull. Start the phone back up and it freezes again on the lock screen not allowing you to use it. A restore or wipe is required. I was thinking it was the Rom or kernel so I downloaded valpeak Rom and a kernel and it did the same thing on it. Just wondering if anyone had heard seen or experienced something like this before ? Is there another over clock program that's good and stable ?
Thanks in advance
Virus Rom airborne rc6
Netarchy toastmod kernel
Click to expand...
Click to collapse
You need to clock it at a lower maximum speed. Some chips can't handle overclocking as well as other chips can. My phone can only be overclocked to like 1.1, and anything over that, I have the same issues you are explaining. Set the maximum speed a little lower and see if that helps.
That's just it when I try to set it up it freezes. I contacted the developer of the app and they said its on my end. I used the valpak before and could clock to 1.2 I'm wondering if there isnt something wrong with the kernels lime maybe they did a software update on the app and it doesn't agree with Rom or kernel. I've heard good things about set cpu I may try it. Thanks for your help
jshaddix865 said:
That's just it when I try to set it up it freezes. I contacted the developer of the app and they said its on my end. I used the valpak before and could clock to 1.2 I'm wondering if there isnt something wrong with the kernels lime maybe they did a software update on the app and it doesn't agree with Rom or kernel. I've heard good things about set cpu I may try it. Thanks for your help
Click to expand...
Click to collapse
Yeah I know what you mean, you just gotta hurry and get into the app and lower the max speed before the app gets superuser permission and freezes again. Or if you have the SDK on your pc and know how to use adb, you could remove the app from the phone while connected to a pc in recovery. Also, I use setCPU, and I've had nothing but good experiences with it. I've never used Overclock widget so I can say anything about it.
try flashing a different kernel its happened to me before and thats what i had to do then i changed the max and flashed back to the other kernel
re
Leukay said:
Yeah I know what you mean, you just gotta hurry and get into the app and lower the max speed before the app gets superuser permission and freezes again. Or if you have the SDK on your pc and know how to use adb, you could remove the app from the phone while connected to a pc in recovery. Also, I use setCPU, and I've had nothing but good experiences with it. I've never used Overclock widget so I can say anything about it.
Click to expand...
Click to collapse
Thats how i fixed it. I ended up using the computer to remove the app and used setcpu. I normally dont care about the over clocking ability but the battery life sucks on the virus Rom. The roms great just crappy battery life. Thankfully that worked we will see if by underclocking it helps if not ill have to look for a different Rom. Thanks for your help man.
What is the safest speed you can overclock the samsung epic 4g? I am using the Tegrak overclock right now, and I found out the ultimate can run up to 2ghz.
That doesn't work. You have to be using a custom kernel to overclock the Epic and it is only safe up to 1.4ghz.
063_XOBX said:
That doesn't work. You have to be using a custom kernel to overclock the Epic and it is only safe up to 1.4ghz.
Click to expand...
Click to collapse
FYI, complete newb to this stuff, so please bear with me. Are you saying that it takes a custom kernal for the Tegrak Ulitimate, or the the version I have right now? With the Tegrak Overclock, I put it at 1.3 and it seems noticably faster.
Tegrak ultimate shouldn't work at all, and you're lucky it didn't royally screw up your phone without a kernel with support for overclocking. Look in development and select a custom kernel to fit your tastes then download either SetCPU or OverClock widget and use one of them to raise the clock speed on your phone. I recommend either of those because they are tried and tested methods.
063_XOBX said:
Tegrak ultimate shouldn't work at all, and you're lucky it didn't royally screw up your phone without a kernel with support for overclocking. Look in development and select a custom kernel to fit your tastes then download either SetCPU or OverClock widget and use one of them to raise the clock speed on your phone. I recommend either of those because they are tried and tested methods.
Click to expand...
Click to collapse
Weird, on the android market it says that it (the standard Tegrak) works with stock kernels, custom kernels, and custom roms. I checked before installing it and I just double checked it now
For the record, it has been a while since I played with my phone, but it's kernel right now is 2.6.32.9
063_XOBX said:
Tegrak ultimate shouldn't work at all, and you're lucky it didn't royally screw up your phone without a kernel with support for overclocking. Look in development and select a custom kernel to fit your tastes then download either SetCPU or OverClock widget and use one of them to raise the clock speed on your phone. I recommend either of those because they are tried and tested methods.
Click to expand...
Click to collapse
Another thought; I've had setcpu for a while, but didn't find much use for it as the phone is already operating at 1GHZ, which is the max SetCPU will allow the phone to work.
Because there isn't a kernel that support OverClocking installed.Once you have an overclock-compatible kernel installed SetCPU can raise the CPU speed.
063_XOBX said:
Because there isn't a kernel that support OverClocking installed.Once you have an overclock-compatible kernel installed SetCPU can raise the CPU speed.
Click to expand...
Click to collapse
I see. Thanks for the info
Also, while tegrak may work I strongly recommend a custom kernel for added stability, along with overclock capabilities up to 1.4ghz (depending on if your phone can handle it) undervolting and other useful features.
Each phone is different. Some phones can handle 1.4ghz, others can't even handle 1.2ghz. You just have to test it out and see what your phone can handle.
063_XOBX said:
Also, while tegrak may work I strongly recommend a custom kernel for added stability, along with overclock capabilities up to 1.4ghz (depending on if your phone can handle it) undervolting and other useful features.
Click to expand...
Click to collapse
Any recommendations for a custom kernel?
qbking77 said:
Each phone is different. Some phones can handle 1.4ghz, others can't even handle 1.2ghz. You just have to test it out and see what your phone can handle.
Click to expand...
Click to collapse
It seemed to hand 1.3 just fine, but I still backed it down to 1.0 until I get the custom kernel for it.
Grimace78 said:
Any recommendations for a custom kernel?
Click to expand...
Click to collapse
I personally use Twilite Zone.
063_XOBX said:
I personally use Twilite Zone.
Click to expand...
Click to collapse
Got a link? I looked but couldn't find it.
Grimace78 said:
Got a link? I looked but couldn't find it.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=976197&highlight=twilight+zone
qbking77 said:
http://forum.xda-developers.com/showthread.php?t=976197&highlight=twilight+zone
Click to expand...
Click to collapse
Thank you
After reading the link to Twilite, I am interested in running the SyndicateROM Frozen. Any chance someone could walk me through the steps? I'm not being lazy and am doing research, just want to make sure I don't screw up my phone. I am at work right now, so I haven't even attempted to get Twilite yet. Perhaps getting the new rom would accomplish two things at once??
Edit: After some reading I think I will be ok, but if anyone wants to chime in then feel free.
Grimace78 said:
After reading the link to Twilite, I am interested in running the SyndicateROM Frozen. Any chance someone could walk me through the steps? I'm not being lazy and am doing research, just want to make sure I don't screw up my phone. I am at work right now, so I haven't even attempted to get Twilite yet. Perhaps getting the new rom would accomplish two things at once??
Edit: After some reading I think I will be ok, but if anyone wants to chime in then feel free.
Click to expand...
Click to collapse
Here you go man! http://www.youtube.com/watch?v=Wy2Et6qVGdo
I made this video and it should help you out. The twilight kernel comes with the syndicate rom so you don't need to flash it since it already comes with the rom.
Is there any truth to a post I read stating some kernels support Wifi Tether and others don't?
Sent from my SPH-D700 using XDA Premium App
I am trying to figure out the best setting for the rom. I am only getting like 6 to 8 hours on my phone. When I've seen others get close to 24 with light to moderate use. Like I stated in the Title The rom is Dewizzed 2.0, and I know the some people have the same rom while using tuner pro. I would ask the dev in the devolpment section, but I don't have permissions to do so. Also Hello everyone in xda. I am a long time visitor since the G1 days. I made this account a long time ago, but recently got tired of touchwiz, and decided to give it the boot lol.
from what I have heard... for dewizzed... if you use Faux, just flash gideon's script you might want to bump the clock just a bit over 1ghz to make it smoother... i believe synergy kernel works really well with dewizzed from the getgo (haven't tried it i get good results from faux).... if using gideon's script.. don't use a cpu tuner, you want to manually adjust the values in the script.
Teo032 said:
from what I have heard... for dewizzed... if you use Faux, just flash gideon's script you might want to bump the clock just a bit over 1ghz to make it smoother... i believe synergy kernel works really well with dewizzed from the getgo (haven't tried it i get good results from faux).... if using gideon's script.. don't use a cpu tuner, you want to manually adjust the values in the script.
Click to expand...
Click to collapse
See this is where I seen people on here talk about scripts. While yes I hear great things about it. I'm pretty stupid in to what it it, does, or how to apply lol. As to say why My idiot self uses setcpu, but apparently setcpu gets stuck on conservative which was creating a noticeable lag. Which in turn lead me to tuner pro. Which in turn leads me to look for the appropriate settings I want. Just don't know how to achieve that. Things sure have changed since the G1. -sigh- Sorry if I'm more of a pain in the bottom. :\
Sent from my SGH-T989 using xda premium
scripts are basically tweaks to your phone. They're PreProgrammed tweaks that runs when your phone is booted.
Basically gideon's script controls your phone's clockspeed and voltages without the need of a 3rd party app. Therefore when running tuner pro it overrides the script... go to faux's kernel thread... it's in the 3rd post. You flash the script through cwm.. check out synergy's thread for its own configuration.. i haven't really checked it out yet (i should)... heard great things about that kernel
Here is a link to Gideon's scripts. Before you flash them uninstall system tuner, and wipe cache and dalvik. I suggest putting the revert script on your sd card also. In case your phone doesnt like being under volted. You can boot into recovery and flash the revert script.
http://forum.xda-developers.com/showpost.php?p=20946429&postcount=574
I am running Dewizzed 2.0 with Synergy kernel and using System Tuner Pro, 1.62max 384min, 384max and 192min with screen off and am not UV because Synergy is already UV. Getting well over 21 hours of use, light to moderate usage,
Sounds like you have a app that is using a lot of battery.
Teo032 said:
scripts are basically tweaks to your phone. They're PreProgrammed tweaks that runs when your phone is booted.
Basically gideon's script controls your phone's clockspeed and voltages without the need of a 3rd party app. Therefore when running tuner pro it overrides the script... go to faux's kernel thread... it's in the 3rd post. You flash the script through cwm.. check out synergy's thread for its own configuration.. i haven't really checked it out yet (i should)... heard great things about that kernel
Click to expand...
Click to collapse
Thanks for helping this Dummy out with the scripts bro. When I flash dewizzed 2.0 again. Ill flash gideon right over it.
Sent from my SGH-T989 using xda premium
GreggoryD502 said:
Here is a link to Gideon's scripts. Before you flash them uninstall system tuner, and wipe cache and dalvik. I suggest putting the revert script on your sd card also. In case your phone doesnt like being under volted. You can boot into recovery and flash the revert script.
http://forum.xda-developers.com/showpost.php?p=20946429&postcount=574
Click to expand...
Click to collapse
Thanks bro for the revert script. Will definitely check that out. Thanks for the replies, but when I was up last night. My phone said 15% before I left my room to talk to someone came back say 15-20 min. It was dead and I had just did a reboot at that time. :/
Sent from my SGH-T989 using xda premium
adclem said:
I am running Dewizzed 2.0 with Synergy kernel and using System Tuner Pro, 1.62max 384min, 384max and 192min with screen off and am not UV because Synergy is already UV. Getting well over 21 hours of use, light to moderate usage,
Sounds like you have a app that is using a lot of battery.
Click to expand...
Click to collapse
If so battery management hasn't been reporting it running. Could It be social hub? I only Facebook other hour. Sync is always once a day. As well as managing my settings.
Sent from my SGH-T989 using xda premium
I was wondering on how exactly I do this? I looked through and seen people talking about it, but not how to do it. Can someone explain to me what it does, and how to do it?
E4GTUser94 said:
I was wondering on how exactly I do this? I looked through and seen people talking about it, but not how to do it. Can someone explain to me what it does, and how to do it?
Click to expand...
Click to collapse
There are actually several ways to do this. The most popular of which are to have a rooted rom, install a separate application and use that application to modify your cpu speed. The more popular applications to do this are:
SetCPU
ROM Toolbox
ROM Toolbox light
I've used all of these and if I could suggest one to you, I would say ROM Toolbox, because it gives you a lot of other tools that SetCPU does not. HOWEVER, I find that in regards to overclocking/underclocking and setting profiles, SetCPU is much more handy and offers more customization.
VIDEO on overclocking and profiles with SetCPU
VIDEO on ROM Toolbox Pro
Freeroot said:
There are actually several ways to do this. The most popular of which are to have a rooted rom, install a separate application and use that application to modify your cpu speed. The more popular applications to do this are:
SetCPU
ROM Toolbox
ROM Toolbox light
I've used all of these and if I could suggest one to you, I would say ROM Toolbox, because it gives you a lot of other tools that SetCPU does not. HOWEVER, I find that in regards to overclocking/underclocking and setting profiles, SetCPU is much more handy and offers more customization.
VIDEO on overclocking and profiles with SetCPU
VIDEO on ROM Toolbox Pro
Click to expand...
Click to collapse
Is there any certain configuration that you find best? Thanks for all the links and suggestions also!
System tuner pro is also nice. There is no " right" settings. Your phone might not like my settings profile. They are all different. I do however under clock. I see no lag on cm9 beta1. I use a Max CPU of 1ghz. I also under volt everything by -25 because -50 on Evert step crashes my phone. Yours may like it. Just remember do not push the set on boot button until you are sure your phone can handle the new setting.
sent from my BAD A$$ Epic touch
E4GTUser94 said:
Is there any certain configuration that you find best? Thanks for all the links and suggestions also!
Click to expand...
Click to collapse
It is pretty much a try what works. I find that over clocking is nice for certain things, but I like to have a long battery life as well, so I have mine set up so that the CPU is usually running ondemand 800-200 and for certain programs, ondemand 1200-500 and when the screen is turned off it is ondemand 500-200. I haven't had any problems and my battery life is generally very nice. Everyone's phone is different though.
Sent from my SPH-D710 using xda premium