Develop Bugs

Xperia Arc S won't start after updating to ICS

I used PC Companion to update my Sony Xperia Arc S to ICS (Official Sony update). The update did not complete and showed an error. When I tried turning on my phone, it displays the Sony logo, followed by the image of a phone with an exclamation symbol next to it. Then the phone goes blank. I even tried removing the battery and putting it back. Also tried charging my phone. The same thing happens. I don't know what to do. Please help guys. I'm scared that I won't be able to revive my phone!

Flash an .431 firmware through flashtool on you arc and it will be fixed

Urbandevil said:
I used PC Companion to update my Sony Xperia Arc S to ICS (Official Sony update). The update did not complete and showed an error. When I tried turning on my phone, it displays the Sony logo, followed by the image of a phone with an exclamation symbol next to it. Then the phone goes blank. I even tried removing the battery and putting it back. Also tried charging my phone. The same thing happens. I don't know what to do. Please help guys. I'm scared that I won't be able to revive my phone!
Click to expand...
Click to collapse
If your bootloader is locked then you can try using seus (dont use pc companion it always fails for me too) and dont panic its only soft brick and easily recoverable. By the way there is fix for hard brick too.
And if you are on unlocked bl then you cannot update using seus, flash ftf file via flashtool or use patch for it
Sent from my R800i using xda premium

trouble with xperia arc s
can anyone help me?
Tomorrow i updated my SonyEricsson Xperia Arc S with firmware LT18i_4.1.B.0.587_(1254-2716).ftf, after update via flashtool, i started process for getting root, and install CWM, that all will be ended fine. After that, i load my OS and start recover app and data with using Titanium Backup, i install all apps and recover data, then got message about low space on mobile storage and then my mobile started cycled reload. Just for stop that, i removed battery of my phone, and after it, my phone not loading, i hold power button and nothing to do.
How can i resolve that problem? plz help.
i alredy tryed remove battery for a 30 min, and then put mobile on charge without battary. nothing to happen
P.s.: sry for my English.

ruzerone said:
can anyone help me?
Tomorrow i updated my SonyEricsson Xperia Arc S with firmware LT18i_4.1.B.0.587_(1254-2716).ftf, after update via flashtool, i started process for getting root, and install CWM, that all will be ended fine. After that, i load my OS and start recover app and data with using Titanium Backup, i install all apps and recover data, then got message about low space on mobile storage and then my mobile started cycled reload. Just for stop that, i removed battery of my phone, and after it, my phone not loading, i hold power button and nothing to do.
How can i resolve that problem? plz help.
i alredy tryed remove battery for a 30 min, and then put mobile on charge without battary. nothing to happen
P.s.: sry for my English.
Click to expand...
Click to collapse
First of all flash the ftf file via flashtool again
And if that doesnt work then tell
Sent from my LT18i using xda app-developers app

Sahaab said:
First of all flash the ftf file via flashtool again
And if that doesnt work then tell
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
it's can't be done, caz my phone not goin in fastboot mode(no blue led active), and also if i trying to charge it, led not turnin on(no green light).
also have interested fact, if i connect m phone to PC, windows play sound like i connect device, no new dialog window for install drivers caz they already installed.
that window i see when tyed reinstall ftf firmware via flashtool imgur. com/TRFaePJ

ruzerone said:
it's can't be done, caz my phone not goin in fastboot mode(no blue led active), and also if i trying to charge it, led not turnin on(no green light).
also have interested fact, if i connect m phone to PC, windows play sound like i connect device, no new dialog window for install drivers caz they already installed.
that window i see when tyed reinstall ftf firmware via flashtool imgur. com/TRFaePJ
Click to expand...
Click to collapse
Did u shut down phone by taking out battery and then try to enter fastboot mode?
Sent from my LT18i

Sahaab said:
Did u shut down phone by taking out battery and then try to enter fastboot mode?
Sent from my LT18i
Click to expand...
Click to collapse
my phone not load if i push power button.
answer on ur question: yes, i tryed taking out battery and then try to enter to fastboot mode.

ruzerone said:
my phone not load if i push power button.
answer on ur question: yes, i tryed taking out battery and then try to enter to fastboot mode.
Click to expand...
Click to collapse
Was your bootloader unlocked?
Sent from my LT18i

Sahaab said:
Was your bootloader unlocked?
Sent from my LT18i
Click to expand...
Click to collapse
yes, it unlocked and i also installed on my phone CWM 5.0.2.7-nAa-r2.

ruzerone said:
yes, it unlocked and i also installed on my phone CWM 5.0.2.7-nAa-r2.
Click to expand...
Click to collapse
Then this may be a problem
I suggest someone with locked bootloader help you
But I read somewhere that u must uncheck FOTA in the options of what u wnt to flash
Im sorry I cannot be of more help as I do not know
Sent from my LT18i

Sahaab said:
Then this may be a problem
I suggest someone with locked bootloader help you
But I read somewhere that u must uncheck FOTA in the options of what u wnt to flash
Im sorry I cannot be of more help as I do not know
Sent from my LT18i
Click to expand...
Click to collapse
i wrong in one moment when answer.
if i connect my phone to PC, windows play sound "Error when connecting device"
xperia arc s

Can you get into flashmode (back button + USB, green LED)?
Sent from my X10i using xda premium

If you still have problems just use Sony Update Service to restore your phone.
僕のLT18iから送られてきた

tangosierra_ said:
Can you get into flashmode (back button + USB, green LED)?
Sent from my X10i using xda premium
Click to expand...
Click to collapse
nope, i can't nothing to happen if i try.
popthosegaskets said:
If you still have problems just use Sony Update Service to restore your phone.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
if i trying use SUS, it want a flashboot mode, but i can't bring my phone in that mode.

Unhappy Xperia Arc S won't start after updating to ICS
Did You selected to install fastboot, flashmode and Xperia Arc drivers in "Flashtool Drivers Setup"? (C:\Flashtool\drivers\Flashtool-drivers.exe)..I would suggest trying to reinstall your drivers by going to (C:\Flashtool\drivers\Flashtool-drivers.exe) running the exe file and make sure you scroll to the bottom of menu that appears and ticking fastboot,flashmode drivers, some people forget to do this and of course ticking Xperia Arc drivers..

tallman43 said:
Did You selected to install fastboot, flashmode and Xperia Arc drivers in "Flashtool Drivers Setup"? (C:\Flashtool\drivers\Flashtool-drivers.exe)..I would suggest trying to reinstall your drivers by going to (C:\Flashtool\drivers\Flashtool-drivers.exe) running the exe file and make sure you scroll to the bottom of menu that appears and ticking fastboot,flashmode drivers, some people forget to do this and of course ticking Xperia Arc drivers..
Click to expand...
Click to collapse
so, early i was installed drivers for xperia, but i have time ago error with driver "QHSUSB_DLOAD" when connecting phone after my last succefull update firmware, i look for additional driver and solved the proplem, down below log from "system Event Viewer" about last updating and installing new drivers.
Driver Management concluded the process to install driver FileRepository\zeus.inf_amd64_neutral_f430e362a51888ef\zeus.inf for Device Instance ID USB\VID_05C6&PID_9008\5&27095923&0&1 with the following status: 0x0.
------------
Driver Management has concluded the process to add Service ggflt for Device Instance ID USB\VID_05C6&PID_9008\5&27095923&0&1 with the following status: 0.
------------
A service was installed in the system.
Service Name: SEMC USB Flash Driver Filter
Service File Name: system32\DRIVERS\ggflt.sys
Service Type: kernel mode driver
Service Start Type: demand start
------------
Driver Management has concluded the process to add Service ggsemc for Device Instance ID USB\VID_05C6&PID_9008\5&27095923&0&1 with the following status: 0.
------------
A service was installed in the system.
Service Name: SEMC USB Flash Driver
Service File Name: system32\DRIVERS\ggsemc.sys
Service Type: kernel mode driver
Service Start Type: demand start
Service Account:
------------
Driver Management concluded the process to install driver FileRepository\volsnap.inf_amd64_neutral_7499a4fac85b39fc\volsnap.inf for Device Instance ID STORAGE\VOLUMESNAPSHOT\HARDDISKVOLUMESNAPSHOT28 with the following status: 0x0.
------------
Driver Management concluded the process to install driver FileRepository\volsnap.inf_amd64_neutral_7499a4fac85b39fc\volsnap.inf for Device Instance ID STORAGE\VOLUMESNAPSHOT\HARDDISKVOLUMESNAPSHOT27 with the following status: 0x0.
------------
Driver Management concluded the process to install driver FileRepository\volsnap.inf_amd64_neutral_7499a4fac85b39fc\volsnap.inf for Device Instance ID STORAGE\VOLUMESNAPSHOT\HARDDISKVOLUMESNAPSHOT26 with the following status: 0x0.
Click to expand...
Click to collapse
So now if i connect my Xperia Arc S to computer, i don't hear sound what's mean "Error when connecting device" for a now, it's play correct sound, like device spoted normaly without errors, but my phone anyway can't enter to flash mode for reinstalling FIRMWARE, today i also charged battery without phone, by using portable doc station for battary.
additional info: my phone not turning LED like green when charging or BLUE when i try bring phone to flash mode.
What i can do for resolving problem, i mean, all problems started after my restoring backuped programs and earn 0 space on local phone storage. And after cycling rebooting my phone, before i removed battery.
ty for advice.

[Q] Bricked Xperia S??

Hi,
First time poster here. I've done a lot of searching to find people with the same problem but can't. Sorry if it's out there and I've missed it.
Essentially I’m worried that I’ve bricked my Xperia S (running ICS). My problem is this:
First I rooted using this link: http://www.xperiagamer.com/Beginners-Guides/rooting-xperia-s.html
Then I installed CWM Recovery using the RecoverX project: http://forum.xda-developers.com/showthread.php?t=1773227
Then I tried to flash cyanogenmod 9 but failed.
I saw somewhere that it mught help to flash XTXperience so I did that. This failed and my Xperia S boots up to the Sony sign then fails and starts again just cycling through.
I can't get in to fastboot mode via CWM or otherwise. When plugged in to the laptop it is recognised but the computer can’t find the drivers (I've tried to instal manually) and then the phone reboots so the computer can no longer see it.
Can anyone help please??!!
Thanks
Dumps

iamdumps said:
Hi,
First time poster here. I've done a lot of searching to find people with the same problem but can't. Sorry if it's out there and I've missed it.
Essentially I’m worried that I’ve bricked my Xperia S (running ICS). My problem is this:
First I rooted using this link: http://www.xperiagamer.com/Beginners-Guides/rooting-xperia-s.html
Then I installed CWM Recovery using the RecoverX project: http://forum.xda-developers.com/showthread.php?t=1773227
Then I tried to flash cyanogenmod 9 but failed.
I saw somewhere that it mught help to flash XTXperience so I did that. This failed and my Xperia S boots up to the Sony sign then fails and starts again just cycling through.
I can't get in to fastboot mode via CWM or otherwise. When plugged in to the laptop it is recognised but the computer can’t find the drivers (I've tried to instal manually) and then the phone reboots so the computer can no longer see it.
Can anyone help please??!!
Thanks
Dumps
Click to expand...
Click to collapse
Keep pressing Unlock key + Volume Down key until you get 3 vibrates.
The phone is now off and you can connect it into flashmode and reflash your ics firmware.
The other thing you can do is going into CWM and wipe data and cache (that worked once for me when I had a bootloop)
--> you will lose all your data.
For CM you first have to install the kernel via fastboot and then go into CWm and flash the CM.zip file.

patato800 said:
Keep pressing Unlock key + Volume Down key until you get 3 vibrates.
The phone is now off and you can connect it into flashmode and reflash your ics firmware.
The other thing you can do is going into CWM and wipe data and cache (that worked once for me when I had a bootloop)
--> you will lose all your data.
For CM you first have to install the kernel via fastboot and then go into CWm and flash the CM.zip file.
Click to expand...
Click to collapse
Firstly he need to unlock his phones bootloader.
Sent from my Xperia S using xda app-developers app

HooLIMAN87 said:
Firstly he need to unlock his phones bootloader.
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
Ofcourse

patato800 said:
Keep pressing Unlock key + Volume Down key until you get 3 vibrates.
The phone is now off and you can connect it into flashmode and reflash your ics firmware.
The other thing you can do is going into CWM and wipe data and cache (that worked once for me when I had a bootloop)
--> you will lose all your data.
For CM you first have to install the kernel via fastboot and then go into CWm and flash the CM.zip file.
Click to expand...
Click to collapse
Thanks but that doen't seem to work. All i can get it to do is turn off with power and volume up. When it comes back on again it just cycles through again.
Can't get it to communicate with the computer at all - it recognises it but can't find drivers. then the phone disconnects itself in the reboot.

iamdumps said:
Thanks but that doen't seem to work. All i can get it to do is turn off with power and volume up. When it comes back on again it just cycles through again.
Can't get it to communicate with the computer at all - it recognises it but can't find drivers. then the phone disconnects itself in the reboot.
Click to expand...
Click to collapse
Did you try to connect it in flashmode? (Hold volume down and plug it into your pc after shutting it down)

patato800 said:
Did you try to connect it in flashmode? (Hold volume down and plug it into your pc after shutting it down)
Click to expand...
Click to collapse
Yes I can connect to flashtool in flash mode. Sorry I'm a bit lost on where to go from here. All help greatly appreciated at this point.

If you can find a way to copy a ROM file into the fone we can flash it. The fone isnt being recognized by the PC , but the CWM works and it cannot mount as a USB Storage as some lunfile is missing . I am also on the same page and struggling for hours

Download the latest .55 firmware (it's in the general section) and flash it using this guide :
http://forum.xda-developers.com/showthread.php?t=1725078
- It teaches you how to use flashtool

patato800 said:
Download the latest .55 firmware (it's in the general section) and flash it using this guide :
http://forum.xda-developers.com/showthread.php?t=1725078
- It teaches you how to use flashtool
Click to expand...
Click to collapse
It worked , Finally , thank you so much .

patato - thanks mate, will get on it and cry if I have any more questions. :laugh:
sarandeep - good work!!

patato800 said:
Download the latest .55 firmware (it's in the general section) and flash it using this guide :
http://forum.xda-developers.com/showthread.php?t=1725078
- It teaches you how to use flashtool
Click to expand...
Click to collapse
Sorted! Thanks patato. Now to consider that cyanogen upgrade again...!

iamdumps said:
Sorted! Thanks patato. Now to consider that cyanogen upgrade again...!
Click to expand...
Click to collapse
Search youtube on how to unlock the bootloader and install CM10 there is one very good video but i can't give the link now as I'm on my phone
Glad I helped you ;D
Sent from my Jellybean Xperia S!

A tip for the newbies out here:
Read everything carefully. Chances of bricking a Sony device is quite low because of Sony's dev support but you will have moments of anxiety and lots of torn hairs. As a way to start, please go through all the top stickied posts in the Dev section and understand what are the many processes happening. It doesn't take more than a couple of hours to go through them but in the long run, helps you to enjoy your device better. Hope you will have a good time with the S

Xperia S Brick ?

Hey Guys.
I just flashed my Xperia S with new kernel and something goes wrong.
The phone doesn't start. No LED. No vibration with Power+Vol Up or Down. Nothing.
I only get a red LED when connecting with charger or PC.
Can someone help me, is there a chance to get it back working?
/Sry, if my English isn't good, I am from Germany
Hope you can help me.
//Now, if i connect with PC it searched and installed the "QHUSB_DLOAD" drivers on my laptop, and flashtool says :
15/024/2012 14:24:10 - INFO - <- This level is successfully initialized
15/024/2012 14:24:10 - INFO - Flashtool Version 0.8.6.0 built on 2012-06-13 08:08:54
15/024/2012 14:24:10 - INFO - You can drag and drop ftf files here to start flashing them
15/024/2012 14:24:15 - INFO - Device connected with USB debugging on
15/024/2012 14:24:15 - INFO - Connected device : LT26
15/024/2012 14:24:15 - INFO - Installed version of busybox : BusyBox v1.16.2androidfull (2011-06-09 17:40:07 CST) multi-call binary.
15/024/2012 14:24:15 - INFO - Android version : 2.3.4 / kernel version : 2.6.38-android-x86+
15/024/2012 14:24:16 - INFO - Device disconnected
Click to expand...
Click to collapse
it disconnects itself...

U need to make HArd reset master reset,key combo.
Use SEUS to install "new Update" make it in flash mode and connect to pc,
i soft bricked my XPS once, u need to Use SEUS, only way to restore if not flashtool...

i dont come into the flashmode :/

volfruora said:
i dont come into the flashmode :/
Click to expand...
Click to collapse
vol up and vol down pressed at the same time and then hold power button too, wait for 3 vibes 15 secs or so, run flash tool, plug in phone holding vol down, and straight away click on flash/choose rom.
If the phone closes... leave flashtool running, unplug phone, press vol up and down with power until 3 vibes, then vol down and reconnect, flash should start straight away and complete.

it doesn't work, i tried it many times. there are no vibrations. i just take out the accu and take it back in, but it doesnt work too

Try letting it charge for a few hours, your phone battery might be flat.
Sent from my Xperia S using P.A.C man rom

done.
doesn't work too...

volfruora said:
done.
doesn't work too...
Click to expand...
Click to collapse
Ur kernel is wrong.u should just flashing a kernel... Go to flash tools and flash kernel
(vol down-usb) . If dont work,. Instal drivers & try againe
Sent from my LT26i using Tapatalk 2

nothing happens. accu is fully loaded (external)
no reaction of the phone, just the log in flashtool i posted in first post.

volfruora said:
nothing happens. accu is fully loaded (external)
no reaction of the phone, just the log in flashtool i posted in first post.
Click to expand...
Click to collapse
Have you tried the latest flashtool version? Its a later version that what up posted in the first post. http://forum.xda-developers.com/showthread.php?t=1588586
Sent from my Galaxy Nexus using xda app-developers app

yeah, everything tried. the phone doens't make anything....

[Q] My sony ericsson arc s is stuck on sony logo and pc doesn't recognize it

Hi Guys
I tried to install Ice Bean rom on my device using CWM and when it asked to reboot my device
my phone stuck to Sony Logo and doesn't respond to anything...
my pc doesn't recognize it (as if nothing is connected to my pc)
when i hold back button and press on power button it only blink blue for 1 sec and led goes off
i tried to hold volume down button and press power button and nothing happened
only a vibrate for a sec then stuck to sony logo
battery is charged
i think i bricked it
how to workaround it please help
is there any option to get it back
maybe using Testpoint or i don't know since my phone is not recognized by the pc
please help
before u answer please read (my phone is not recognized by the usb cable) so i guess solutions using usb cables won't help
please help....:fingers-crossed:

Sv: [Q] My sony ericsson arc s is stuck on sony logo and pc doesn't recognize it
yazanallahham said:
Hi Guys
I tried to install Ice Bean rom on my device using CWM and when it asked to reboot my device
my phone stuck to Sony Logo and doesn't respond to anything...
my pc doesn't recognize it (as if nothing is connected to my pc)
when i hold back button and press on power button it only blink blue for 1 sec and led goes off
i tried to hold volume down button and press power button and nothing happened
only a vibrate for a sec then stuck to sony logo
battery is charged
i think i bricked it
how to workaround it please help
is there any option to get it back
maybe using Testpoint or i don't know since my phone is not recognized by the pc
please help
before u answer please read (my phone is not recognized by the usb cable) so i guess solutions using usb cables won't help
please help....:fingers-crossed:
Click to expand...
Click to collapse
Your bootloader was unlocked before you flashed the specific ROM?
Sent from my GT-I9300 using xda app-developers app

Destroyedbeauty said:
Your bootloader was unlocked before you flashed the specific ROM?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yes it was unlocked using the SE method:crying:

yazanallahham said:
Yes it was unlocked using the SE method:crying:
Click to expand...
Click to collapse
I think your CMW is removed.
you have to flash kernel once again.

bjchettri said:
I think your CMW is removed.
you have to flash kernel once again.
Click to expand...
Click to collapse
how to flash it if my pc doesn't recognize my phone?

yazanallahham said:
how to flash it if my pc doesn't recognize my phone?
Click to expand...
Click to collapse
It's simple dude you have to go to bootloader mode. press and hold menu button untill you plugged your device into the pc/laptop.

bjchettri said:
It's simple dude you have to go to bootloader mode. press and hold menu button untill you plugged your device into the pc/laptop.
Click to expand...
Click to collapse
I already tried this and my pc still doesn't recognize it
nothing happens
my phone shows sony logo and vibrates only when i press power button

yazanallahham said:
I already tried this and my pc still doesn't recognize it
nothing happens
my phone shows sony logo and vibrates only when i press power button
Click to expand...
Click to collapse
Then do a fresh installation through the flashtool. flash a official firmware and do the same procedure from the beginning.

bjchettri said:
Then do a fresh installation through the flashtool. flash a official firmware and do the same procedure from the beginning.
Click to expand...
Click to collapse
how can i use flashtool if my pc doesn't recognize my phone which means that the flashtool won't be able to recognize the phone too
?????

yazanallahham said:
how can i use flashtool if my pc doesn't recognize my phone which means that the flashtool won't be able to recognize the phone too
?????
Click to expand...
Click to collapse
Oh, dude flashtool just need your device driver and you have to press back button untill you connect your phone on your pc and it also shown on flashtool which is included in procedure of flashing through flashtool and one thing PC not need to recognized your device because flashtool is the only one method to recover bricked phone. that's it .. if you got confused then please search on google you will find the solution.

bjchettri said:
Oh, dude flashtool just need your device driver and you have to press back button untill you connect your phone on your pc and it also shown on flashtool which is included in procedure of flashing through flashtool and one thing PC not need to recognized your device because flashtool is the only one method to recover bricked phone. that's it .. if you got confused then please search on google you will find the solution.
Click to expand...
Click to collapse
Dear bjchettri
I do appreciate all your efforts
I have to explain the situation just to make things more clear because it looks like you misunderstand me
when I connect my phone (in all modes "Bootloader, Fastboot, normal, recovery..etc) nothing happens on my pc
even in device manager (i'm using Microsoft windows) the system doesn't show any item for a new attached device or an item for an defined attached driver (which used to appear all modes)
the flashtool needs the system to find an attached device to communicate with (usually the attached device name looks like "android phone", SE android or something this (depends on ur phone brand, model)
now since my system doesn't find any device when I connect my mobile then the flashtool won't be able to communicate with my device (even if i tried to boot my device in all modes "bootloader, fastboot, normal, recovery) by holding specific buttons (menu or volumn down or back buttons)
and if you read my question you will see that i was asking if anyone knows any way to connect my phone using testpoints or something like this because i though maybe I can let my pc to recognize my phone using the testpoints method.
I'm not sure but if i could make my phone recognized by the pc then i will have like 10 ways to find the problem and fix it.

Hi yazanallahham
I have the same issue, could not find any solution yet, wondering if you have fixed your fone ?

yazanallahham said:
Dear bjchettri
I do appreciate all your efforts
I have to explain the situation just to make things more clear because it looks like you misunderstand me
when I connect my phone (in all modes "Bootloader, Fastboot, normal, recovery..etc) nothing happens on my pc
even in device manager (i'm using Microsoft windows) the system doesn't show any item for a new attached device or an item for an defined attached driver (which used to appear all modes)
the flashtool needs the system to find an attached device to communicate with (usually the attached device name looks like "android phone", SE android or something this (depends on ur phone brand, model)
now since my system doesn't find any device when I connect my mobile then the flashtool won't be able to communicate with my device (even if i tried to boot my device in all modes "bootloader, fastboot, normal, recovery) by holding specific buttons (menu or volumn down or back buttons)
and if you read my question you will see that i was asking if anyone knows any way to connect my phone using testpoints or something like this because i though maybe I can let my pc to recognize my phone using the testpoints method.
I'm not sure but if i could make my phone recognized by the pc then i will have like 10 ways to find the problem and fix it.
Click to expand...
Click to collapse
Is your bootloader unlocked?If its locked then try to fix it with SEUS not PC Companion downlod SEUS and try.
Sent from my Xperia Arc LT15i using XDA

Z1C won't stay in flashmode

Ok so I've been trying to get flashtool to work with my xperia z1c but I can't get the phone to stay in flashmode. The green led lights briefly and flashtool detects a device in flashmode but after a short time it just drops out of flashmode and boots normally. I originally blamed windows 8.1 but have tried 2 windows 7 machines with the same results. Have tried the Sony z1c drivers package and the latest flashtool drivers - same result. I've searched on Google and found people with the same problem on different xperia devices but has anyone else had the same problem with their z1c? if so has anyone solved it?
Sent from my D5503 using xda app-developers app

So what is the problem? If the phone does not stay long enough in flashmode, try this:
Open flashtool
Click flash, and set up everything (firmware, wipe, etc.)
Now click on flash
After 30 seconds plug in your phone in flashmode.

twilliams08 said:
Ok so I've been trying to get flashtool to work with my xperia z1c but I can't get the phone to stay in flashmode. The green led lights briefly and flashtool detects a device in flashmode but after a short time it just drops out of flashmode and boots normally. I originally blamed windows 8.1 but have tried 2 windows 7 machines with the same results. Have tried the Sony z1c drivers package and the latest flashtool drivers - same result. I've searched on Google and found people with the same problem on different xperia devices but has anyone else had the same problem with their z1c? if so has anyone solved it?
Sent from my D5503 using xda app-developers app
Click to expand...
Click to collapse
Happened to me too. I just flashed it before it rebooted, once it starts flashing it wont reboot it'll finish the process. So no worries everything worked out fine.

Thanks for the responses. I'd previously tried to flash an ftf by putting the phone into flashmode first then pressing flash and it always rebooted before the files were prepared so assumed there was something wrong. If you prepare the files first then put the phone into flashmode then all is okay. Thanks again.
Sent from my D5503 using xda app-developers app

z1c flash mode
twilliams08 said:
Thanks for the responses. I'd previously tried to flash an ftf by putting the phone into flashmode first then pressing flash and it always rebooted before the files were prepared so assumed there was something wrong. If you prepare the files first then put the phone into flashmode then all is okay. Thanks again.
Sent from my D5503 using xda app-developers app
Click to expand...
Click to collapse
hey guys
i have same problem with my z1c but with a difference that my phone doesn't boot into flash mode at all , even for a second
its led just become green and then red and turn off
do you know what's the problem?
i unlocked the bootloader and its rom is cm 11

semolation said:
hey guys
i have same problem with my z1c but with a difference that my phone doesn't boot into flash mode at all , even for a second
its led just become green and then red and turn off
do you know what's the problem?
i unlocked the bootloader and its rom is cm 11
Click to expand...
Click to collapse
how do you boot into flashmode?
the right way is: turn off your device, open flashtools, choose flashmode, choose your ftf you want to flash and wait until finished,
push Vol- and hold it, then plug your device via usb to the computer, then flashtool does its job...

moonryder said:
how do you boot into flashmode?
the right way is: turn off your device, open flashtools, choose flashmode, choose your ftf you want to flash and wait until finished,
push Vol- and hold it, then plug your device via usb to the computer, then flashtool does its job...
Click to expand...
Click to collapse
i do it as you said
but it doesn't recognize the phone

semolation said:
i do it as you said
but it doesn't recognize the phone
Click to expand...
Click to collapse
1. install Flashtool-drivers (you will find it in Flashtool\drivers
2. reboot your device
3. connect your device to PC (now it will be recognized)
4. shutdown your device
5. now the same as i mentioned in my previous post