Develop Bugs

install wrong ROM to acer E101

Dear All,
i installed wrong rom to acer smartphone E101 and its dont work now , its open and show acer logo then restart ...... i tri install correct rom using SD card but the install screen don't appear.
iknow the proceduer to reset or clean boot or install new rom but its dont work too
please help me to solve this problem >>>>>>>

urgent help
please any help

up>>>>>>>>>>>>>>>

ask hdubli

put it in download mode and try the flasher
Sent from my E400 using the XDA mobile application powered by Tapatalk

what is " download mode" ?

NEED HELP WITH hp iPAQ hx2410
i have " HP IPAQ hx2410 " with WM2003 CE 1.10.0 and i upgraded with this window 5.2 it upgraded successfully but i m stuck on the first loading screen. its stuck when loading complete i have tried every thing such as boot-loader thing and also cant downgrade it . . . so kindly plzzz any one tell me how can i go to my initial state on wm2003 ASAP.
[email protected]

same problem here ? the acer logo starts ..
after that the red LED starts blinking ...
no boot-loader
no hard rest
i tried everything..
please anyone can help us ?
My Device: Acer betouch E101

DJ-XMS
www.acer-club.ru/Vosstanovlenie-telefona-posle-neudachnoj-proshivki-t572.html

DJ-XMS said:
same problem here ? the acer logo starts ..
after that the red LED starts blinking ...
no boot-loader
no hard rest
i tried everything..
please anyone can help us ?
My Device: Acer betouch E101
Click to expand...
Click to collapse
I just had the same symptoms with my e100. and i found out that u can force it to boot by pressing volume up + camera with the silence button up. As soon as the version of your ROM appears on the screen (should b about 3~4 sec) release both button to start windows, release volume up to go clean boot, or release the camera button to go flah ROM (in case u want to flash a new ROM from the sd card - must b 256/512mb formated in fat16).

The Problem can be solved just follow the instructions :
1- Press the camera and the restart button with the sound switcher down (silent mode)
2- Your device will boot to the download mode.
3- download the original rom from global-download.acer.com/GDFiles/OS/OS/OS_Acer_2.003.04.EN_WM65_A.zip?acerid=634013918060286729&Step1=Smart%20Handheld&Step2=beTouch%20Series&Step3=E101&OS=M02&LC=en&BC=Acer&SC=EMEA_1
4- unrar the rom and press setup during the setup it will tell that active sync is not connected , ignore the window and go to program files(86x)\EUU you will find a folder called imageupdater copy the folder to use it later.
5- download this tool .mediafire.com/?ubilx69aawdbrnu
6- unrar the downloaded files move imageupdater in (4-) to the same folder
7- Run DownloadForm_2005 ( for win 7 right click run as administrator)
8- Have fun .

hi sir
my acer e101
i ddnt get my bootscreen.....
have any solution plz help me

no sir
in acer it not gatting download

This Link Not Working.
louis0 said:
The Problem can be solved just follow the instructions :
1- Press the camera and the restart button with the sound switcher down (silent mode)
2- Your device will boot to the download mode.
3- download the original rom from global-download.acer.com/GDFiles/OS/OS/OS_Acer_2.003.04.EN_WM65_A.zip?acerid=634013918060286729&Step1=Smart%20Handheld&Step2=beTouch%20Series&Step3=E101&OS=M02&LC=en&BC=Acer&SC=EMEA_1
4- unrar the rom and press setup during the setup it will tell that active sync is not connected , ignore the window and go to program files(86x)\EUU you will find a folder called imageupdater copy the folder to use it later.
5- download this tool .mediafire.com/?ubilx69aawdbrnu
6- unrar the downloaded files move imageupdater in (4-) to the same folder
7- Run DownloadForm_2005 ( for win 7 right click run as administrator)
8- Have fun .
Click to expand...
Click to collapse

PlayGhost2 said:
I just had the same symptoms with my e100. and i found out that u can force it to boot by pressing volume up + camera with the silence button up. As soon as the version of your ROM appears on the screen (should b about 3~4 sec) release both button to start windows, release volume up to go clean boot, or release the camera button to go flah ROM (in case u want to flash a new ROM from the sd card - must b 256/512mb formated in fat16).
Click to expand...
Click to collapse
it worked !!
THankS !!

Flashing Guide For Noobs (Text/Images/Video)

Okay I Have Noticed Everywhere that most of the guys don't really know how to flash their phones and because of this they end up with their phones being bricked
so i decided to write a tutorial that will be tailored for the noobs!
Okay Now Here Are The Things you must keep in mind before flashing
First Of All , for a safe installation you need to check your phone's battery is not less than 20% because the flashing process takes about 17% of your battery
Then its compulsory to backup your essential data through Samsung Kies!!
Never touch, use , operate the phone whilst it is being flashed
Never operate the computer between the flashing process or the flashing will be slowed down
You need to have a alot of pateince for this
The fota is not necessary for flashing it can be left out
Do not blame me of the brick of your phone, i did my level best to explain you
Things you need:
Multiloader 5.65 is the best for flashing bada 2.01, but other versions work just fine with bada 1.x
A bada rom, which you can get from SamFirmware
Patience a lot of it
PROCEDURE:
Firstly extract the downloaded rom
Then examine the files carefully, and delete the *.fota file
Now if you are flashing bada 2.0 open multiloader 5.65 if not any other version is okay
Okay now after opening it tick the "Boot change" and the "Full Download"
Then click on the boot, this will open a explorer window then select the bootfiles folder
then click amss, this will open the explorer again then navigate to the amss.bin file in the rom
do this with all other fields but not for "fota", "tune", "PFS", "ETC"
then after this is done, take out the sim and memory card that is in the your phone
then go to download mode by using this combination Volume Down+Lock Key+Power Key, this will take you to download mode
then connect your phone with the PC through the cable
click port search
after the search is done, the feild just below the PORT SEARCH button will be filled with this "Ready [LISMORE]"
then click download
now if you are flashing bada 2.0 , then just after the multiloader flashes the bootfiles the phone will restart in the download mode
but the multiloader will not detect it, and this is normal
then a message will appear in multiloader that phone not detected , this is normal
so you can exit it now, trust me nothing will happen, but DONT disconnect the phone!!!!!!!
in the meanwhile the PC will be installing new drivers of the Phone and this will take a while depending on the internet connection because it will be downloading the drivers
after the installation of drivers is done
open again the Multiloader and repeat the steps of selecting the rom files
then again click port search
again this Message will appear "Ready [LISMORE]"
Then click "Download" now the flashing process will go smoothly
During the flashing process DO NOT turn off the Computer and neither the Phone
After the flashing is done this message will appear in the sidebox "All files completed"
Disconnect the phone, A blue screen will appear after the Samsung Wave Screen, this is normal and do not turn the phone off during this process also
The phone will again restart after this message will appear on the screen "OK Restart Now"
And Voila You got the new Rom In Your Wave!!
Thank Me, If This helped me!
Video will be coming soon!

•Then examine the files carefully, and delete the *.fota, and (mid).rc1 file•Now if you are flashing bada 2.0 open multiloader 5.65 if not any other version is okay
•Okay now after opening it tick the "Boot change" and the "Full Download"
Above i marked in red can u plz explain...
1. why to delete those files
2.many site says dont tick Boot change
Thanks in adavance..

deepsas said:
•Then examine the files carefully, and delete the *.fota, and (mid).rc1 file•Now if you are flashing bada 2.0 open multiloader 5.65 if not any other version is okay
•Okay now after opening it tick the "Boot change" and the "Full Download"
Above i marked in red can u plz explain...
1. why to delete those files
2.many site says dont tick Boot change
Thanks in adavance..
Click to expand...
Click to collapse
sorry do not delete the *.rc1 file but yes fota can be deleted .... the reason is that deleting is not necessary , but you still dont be needing it anyway! because its of no use!
no boot change has to ticked strictly , because bada 2.0 and bada 1.x have different bootfiles so boot change is necessary!

no boot change has to ticked strictly , because bada 2.0 and bada 1.x have different bootfiles so boot change is necessary!
FYI, i flashed successfully to bada 2.0 without ticking boot change and also it is running from last 4-5 days without any issue..(As usual msg bug and known bugs in bada 2.0 are there)...

yeah no need to tick boot change if you ticked already the full download, coz once we ticked the full download, boot change tab is grayish w/c means deactivated.

[Q] FOTA engine not installed

first of all i read the thread of majda star regarding the FOTA engine.
and i tried all the steps which written inside but i still cannot reflash the fota engine into my phone.
i am using wave 1.
was tryin to flash to bada 2.0 then suddenly it turn to a white screen and say FOTA engine is not installed
Plz install below FOta Eng.
(FOTA_ENGINE_VER_INFO_2.0)
when i search the port and i click download.
a msh say that security fail.
how can i fix my phone?? it is gone?

Turn off the phone, then turn it on with DOWNLOAD MODE key combination held. When you are in Download Mode connect it to PC, start Multiloader and try to reflash it to the desired version.

i tried the way.. but volume low + cam + disconnect phone key. and it will not turn to the download mode. and i restart everything in my com. but still cant...

for god sake, after nearly hundred time i tried.. finally i can flash the fota inside.. Thanks you very much and god bless u

woofer202 said:
first of all i read the thread of majda star regarding the FOTA engine.
and i tried all the steps which written inside but i still cannot reflash the fota engine into my phone.
i am using wave 1.
was tryin to flash to bada 2.0 then suddenly it turn to a white screen and say FOTA engine is not installed
Plz install below FOta Eng.
(FOTA_ENGINE_VER_INFO_2.0)
when i search the port and i click download.
a msh say that security fail.
how can i fix my phone?? it is gone?
Click to expand...
Click to collapse
try click the fota button at multidownloaded and u will find ..fota files in the folder that u extract bada 2.0 firmware n reflash again it will be ok

Hey guys, I downloaded BADA 2.0 firmware from SAMFIRMWARE.COM and as you said, got the FOTA error. The problem is that I don't have FOTA file anywhere.
Can anybody supply it?
-------------------------------------------------------------------
Edit: I do have FOTA file, it was disguised among the other files of the firmware.
I thank you all of the tip, all 100% working.
Cheers!

same issue. white scree with red font as stated above. My phone seldom starts automatically, when connected to USB, not going to download mode, it appears as if dead

I can't make Downgrade to My S8500

Hi
I was Install UNOFFICIAL ROM Bada 2 to My S8500 But there are a lot of problems .
So I decided to re-install the official version of the old but I can't Because of this error message appears when you attempt Flashing the official rom .
'Error : Amms Write [0.2s]' .
Is there a solution? .
This is the way in which I Flashing ROM .
1- use Downloader v5.67
2-Select ( LSI Mode ) + Full Download .
3-Access to the download Mode .(Press Voul .Down + Power + Lock key )At the same time .
4-And finally Click (DOWNLOAD) from Loader .
What happens is only this message appears 'Error : Amms Write [0.2s]' . .
Majdi star

hello
what's your old firmware version ?
are you shure it's a full version or only an update ? you need in first a full version if you want to come back in bada 1

Make sure Kies is closed before you flash.

Is still an ongoing problem
Did not solve the problem now to the same previous error message returned and appeared again .
Is there another way to solve this problem ?
thank you .
Majdi star

hummm
it seems your device driver
try to remove it
install again
put your mobile in download mode
connect your mobile via usb (without multiloader)
wait till your computer search and install the driver (win7)
disconnect
now try to do the steps of flashing
edit:charge your mobile

[Q] LG H815 G4 Flash kdz

Hello, my lg is found on the block lg logo because of the deletion of the system partition.
I wonder if a KDZ file was available for lg g4 ( H815 )
the TWRP and unavailable , fastboot mode also but I can just put in download mode.
Lg software update tools do not work.
Do you want my IMEI ?
Help me please

dydyfr said:
I wonder if a KDZ file was available for lg g4 ( H815 )
Click to expand...
Click to collapse
http://downloads.codefi.re/autoprime/LG/LG_G4/H815/H81510B

Thank you a lot! It is restarted , I'm too happy
Thank you the XDA team!
very strong

the link no function. please link one firmware kdz.

how do u get into download mode?
i keep trying different ways but when i hold the volume up button and plug it to the computer it only shows me the IMEI number..
anyone?

transfer8 said:
how do u get into download mode?
i keep trying different ways but when i hold the volume up button and plug it to the computer it only shows me the IMEI number..
anyone?
Click to expand...
Click to collapse
1. Delete any software owned by LG . and removing drivers
2. Install only LG drivers.
3. Switch off the phone completely .
4. Press the top volume , while plugging in USB . You will be in download mode
5. Wait for the driver installation .
6. Open Lg flash tool
7. Select Kdz file.
8. Select 'normal' and start
9. select country & language = Do not touch, do ok
10. LG Mobile Support tool opens, the flash begins.
Warning = an error message may appear , do not close this message , you have to set it aside
Sorry for my bad English

gab2390 said:
the link no function. please link one firmware kdz.
Click to expand...
Click to collapse
Yes indeed the link is not working at the moment .
I'll post it on mega tonight ... :good:

dydyfr said:
1. Delete any software owned by LG . and removing drivers
2. Install only LG drivers.
3. Switch off the phone completely .
4. Press the top volume , while plugging in USB . You will be in download mode
5. Wait for the driver installation .
6. Open Lg flash tool
7. Select Kdz file.
8. Select 'normal' and start
9. select country & language = Do not touch, do ok
10. LG Mobile Support tool opens, the flash begins.
Warning = an error message may appear , do not close this message , you have to set it aside
Sorry for my bad English
Click to expand...
Click to collapse
wohoo thanks man! worked perfectly

Hello,
Here is the link to KDZ file can flash with flash tool lg 2014
V10B LGH815 :good:
http://lg-phone-firmware.com/index.php?id_mod=195

my phone hangs on lg logo. trying to reinstall kdz. but it keeps giving me error after 10% with s/w upgrade. please help (lg g4 h815)

plz bro hlep me flash setup compalet but sill to restart on logo
dydyfr said:
1. Delete any software owned by LG . and removing drivers
2. Install only LG drivers.
3. Switch off the phone completely .
4. Press the top volume , while plugging in USB . You will be in download mode
5. Wait for the driver installation .
6. Open Lg flash tool
7. Select Kdz file.
8. Select 'normal' and start
9. select country & language = Do not touch, do ok
10. LG Mobile Support tool opens, the flash begins.
Warning = an error message may appear , do not close this message , you have to set it aside
Sorry for my bad English
Click to expand...
Click to collapse
plz bro hlep me flash setup compalet but sill to restart on logo

Thank you , it works perfectly