Related
Hi.
I have a rooted s-off desire using alpha rev 1.8.
I'm currently trying to resize the nand partitions using the method on the alpharev.nl site, without a pc. I'm running cm6.1 rom, so I downloaded the n1table zip ready to flash. Its renamed to pb99img.zip on root of sdcard. I've reboot into hboot using volume+down and I'm not quite sure where to go from here. I tried going into recovery and installing zip from SD but it doesnt seem to have worked as when I reboot into rom and check SD storage, it remains the same as before.
I know I must be missing something basic. Anyone know what I'm doing wrong? Cheers.
Sent from my HTC Desire using XDA App
Do NOT continue with what you're doing. Have you even read the instructions on the AlphaRev site? You flash a new MTD table using the fastboot commands of adb:
1) Nandroid backup in recovery.
2) Verify the MD5SUM of the file you downloaded against the one in the table.
3) Flash HBOOT with your phone in fastboot mode (Back+POWER) -> 'fastboot flash hboot bravo_alphaspl.img' (change into the correct filename for the HBOOT you downloaded)
4) 'Fastboot reboot-bootloader'
5) 'Fastboot erase cache'
6) Boot recovery, wipe everything and restore
It´s also working with HBOOT...but I think you have to rename it to PB99IMG.zip (case Sensitiv)
If you have it in your / Filesystem on your SD Card, you will be asked after booting to Bootloader if you want to update.
Answer with "Volume up" or "down"
YOU DO NOT RENAME AN ALPHAREV HBOOT MOD TO PB99IMG
That is for Zip versions of the RUUs and NOTHING to do with AlphaRev
Seriously, read up before you brick your phone
From the Aplha Rev HP:
You can also download the corresponding PB99IMG zipfile, put it on your sdcard, and rename it to PB99IMG.zip. Then start the phone in HBOOT mode (VolDown+POWER) to flash the HBOOT without a PC.
Sorry, if I don´t understand this right...but that´s a fact from his Page
I´m sure Fastboot is the better way...but I tried it like this and it worked
I stand corrected, didn't see they had that option now. My apologies
In which case, you'd download the relevent ZIP file, rename it PB99IMG.zip (not PB99IMG.zip.zip) and put it on the root of our SD card (root - not in any folders)
Then, when you boot into HBOOT it should just pick it up and ask if you want to flash it - you don't go into recovery
no Probs
I never got asked if i wanted to flash the hBOOT
I'm running a rooted HTC desire and i'm trying to load flash the hboot to the oxygen variety
I haven't s-off my phone yet but wanted to use the no PC method outlined above
When i go into hBoot the phone picks up the PB99IMG.zip (saying "checking PB99IMG.zip......") but doen't give me the option to flash the hboot
Am i missing something? Do i have to s-off it the long way first?
Any help would be really appreciated
=]
Yes, you have to S-OFF first before you can change the MTD. It does say on the website:
"If you are already S-OFF, you can get our newest patched HBOOTs from here. (without going through the entire procedure again).
Please read the entire table and pick the partition table with the correct sizes for your ROM. One easy way to switch partition tables, is to nandroid backup,
and verify that the sizes of your backup are indeed the ones listed in the table (or smaller), and restore after flashing hboot."
Any idea if i can choose the Oxygen variation when i use the AlphaRev 1.8 HBOOT reflash utility or will i need to do it again with a PB99IMG.zip after?
the.draconian said:
Any idea if i can choose the Oxygen variation when i use the AlphaRev 1.8 HBOOT reflash utility or will i need to do it again with a PB99IMG.zip after?
Click to expand...
Click to collapse
Do the Alpharev 1.8 Flash first.
Then connect your phone, boot into Fastboot mode, and run the foll:
1) Nandroid backup in recovery.
2) Verify the MD5SUM of the file you downloaded against the one in the table.
3) Flash HBOOT with your phone in fastboot mode (Back+POWER) -> 'fastboot flash hboot bravo_alphaspl.img' (change into the correct filename for the HBOOT you downloaded)
4) 'Fastboot reboot-bootloader'
5) 'Fastboot erase cache'
6) Boot recovery, wipe everything and restore.
Click to expand...
Click to collapse
Again a quote from their site
Edit: Alpharev seems to have taken down the Pb99img method
EddyOS said:
Do NOT continue with what you're doing. Have you even read the instructions on the AlphaRev site? You flash a new MTD table using the fastboot commands of adb:
1) Nandroid backup in recovery.
2) Verify the MD5SUM of the file you downloaded against the one in the table.
3) Flash HBOOT with your phone in fastboot mode (Back+POWER) -> 'fastboot flash hboot bravo_alphaspl.img' (change into the correct filename for the HBOOT you downloaded)
4) 'Fastboot reboot-bootloader'
5) 'Fastboot erase cache'
6) Boot recovery, wipe everything and restore
Click to expand...
Click to collapse
Of course I have read the instructions thoroughly. I would never do anything without reading several times over. As another member pointed out, you can in fact flash from .zip
However it would not work for me, probably a lot of others too, as another member mentioned it has been removed from site.
I have now switched to miui and am not encountering any storage space issues as yet, so I think ill leave it alone for awhile. Thanks for everyone's input and help.
Cheers.
Sent from my HTC Desire using XDA App
Anyone got this to work? Ive tried following the instructions (I have s-off and have repartitioned my HBOOT previously with ADB) and it just says no image found when I load into fastboot
When I try to do it from the SD card on mine, it finds the PB99IMG.zip file but then says "Model ID invalid. Update Fail!" then asks if I want to reboot or not. Rebooting just performs a normal reboot with no changes.
jordan.harris01 said:
When I try to do it from the SD card on mine, it finds the PB99IMG.zip file but then says "Model ID invalid. Update Fail!" then asks if I want to reboot or not. Rebooting just performs a normal reboot with no changes.
Click to expand...
Click to collapse
Obviously, you're trying to install a file meant for another device! That's a very dangerous thing to do!
It's the PB99IMG.zip for the Oxygen HBOOT. How can it be for the wrong device? I'm s-off, running Oxygen RC7.
jordan.harris01 said:
It's the PB99IMG.zip for the Oxygen HBOOT. How can it be for the wrong device? I'm s-off, running Oxygen RC7.
Click to expand...
Click to collapse
At least that's what the error code means anyway..Is there a reason why you cant fastboot flash the img?
Yea, I assumed that. I can't seem to get fastboot working again on my machine. It was working but I haven't had much time to look into what happened. ADB devices brings up the serial number but fastboot won't detect the phone. I was just trying to do this while I was at work and I don't have access to fastboot here.
jordan.harris01 said:
Yea, I assumed that. I can't seem to get fastboot working again on my machine. It was working but I haven't had much time to look into what happened. ADB devices brings up the serial number but fastboot won't detect the phone. I was just trying to do this while I was at work and I don't have access to fastboot here.
Click to expand...
Click to collapse
Adb and fastboot detect the phone at different phases. If one detects, at that point, the other wouldnt.
Are u sure you're trying out fastboot in fastboot mode (poweroff, Back key+Power On)? At that point fastboot should work..Even most severely damaged phones are detected in fastboot
Yes, the phone is in fastboot when I'm trying this. I'm wondering if something happened to the fastboot driver or something. Either way, I'll look into it at some point.
Sup guys! im kinda new to this forum and im kinda stuck with S-Off Precedure With Alpharev.
I am not sure which hboot to download so i went to "bravo_alphaspl-cm7r2.img"
I had burn the img to be bootable disc and when it boots, it read the disc and it prompt me to boot back in windows xp.
Did i download the wrong hboot or i am not burning a bootable disc?
THANKS IN ADVANCE
You need to download and burn the Alpharev utility to disc, boot that and it will run you through the s-off procedure. You then flash the .img file you currently have through fastboot.
snazer said:
Sup guys! im kinda new to this forum and im kinda stuck with S-Off Precedure With Alpharev.
I am not sure which hboot to download so i went to "bravo_alphaspl-cm7r2.img"
I had burn the img to be bootable disc and when it boots, it read the disc and it prompt me to boot back in windows xp.
Did i download the wrong hboot or i am not burning a bootable disc?
THANKS IN ADVANCE
Click to expand...
Click to collapse
That is a hboot paritioning image.
You should download this http://alpharev.nl/alpharev.iso and burn it on a cd.
To flash the image file you mentioned use this procedure:
1) Nandroid backup in recovery.
2) Verify the MD5SUM of the file you downloaded against the one in the table.
3) Flash HBOOT with your phone in fastboot mode (Back+POWER) -> 'fastboot flash hboot bravo_alphaspl.img' (change into the correct filename for the HBOOT you downloaded)
4) 'fastboot reboot-bootloader'
5) 'fastboot erase cache'
6) Boot recovery, wipe everything and restore.
Read more carefully the page.
Thank you so much!
Also, try to push HBoot img with Android Flasher. Pretty simple to use.
My phone is bricked I think
Erm guys, I have a huge problem. I think I just brick my phone.
While I was upgrading my htc desire radio, I think I rebooted the phone. Now I can't on or even charge the phone.
Is my phone screwed?
Something going wrong while flashing a radio can brick your phone. I assume the computer doesn't recognize it and you can't boot into fastboot? Hope that's not the case.
nope i cant boot it up in any way. Even when i plug into a power supply, the orange light does not light up
It would seem to me that your phone is bricked. Might have to send it in for warranty unless someone else has any ideas.
OH GOD! I am so ******* screwed huh?
Unless someone says otherwise, yes. Sorry.
No fastboot either ? Back button + power
Hi
I've looked on here already to try to find a (working) solution for my problem but haven't so far. My HTC desire was
downgraded from ICS to a gingerbread rom successfully - however - upon trying to unlock (unbrand) my phone the
software was stopping this so i tried to install a stock rom on it via usb cable. It downloaded successfully and rebooted.
But when it restarted it stuck on the "htc" loading screen. The only way i can turn it off is to remove the battery - also
when i try to enter recovery it just sticks on the HTC screen too.
This is what it says on the HBOOT screen:
--------------------------------------------------------
-Revolutionary-
BRAVO PVT1 SHIP S-OFF
HBOOT-6.93.1002
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-4.05.00.11
SD CHECKING...
Loading ...[PB99DIAG.ZIP]
No image!
Loading ...[PB99DIAG.ZIP]
No image!
Loading ...[PB99IMG.ZIP]
No image!
Loading ...[PB99IMG.nbh]
No image or wrong image!
-----------------------------------------------
If anyone could help me with this it would be great, thanks!
have u tried flashing new recovery via fastboot commands?
u can click PB99IMG 4ext recovery in my sig, extract it and put the recovery.img in ur c:\ drive on ur computer then turn off ur phone (pull battery) then hold back button + power (thats fastboot) plug in ur phone so it says fastboot usb then open fastboot command window and type -
fastboot erase recovery
then type -
fastboot flash recovery c:\recovery.img
hopefully it will work and ul 4ext recovery and u can restore a nandroid or flash new rom etc
Sent from my HTC Desire
jmcclue said:
have u tried flashing new recovery via fastboot commands?
u can click PB99IMG 4ext recovery in my sig, extract it and put the recovery.img in ur c:\ drive on ur computer then turn off ur phone (pull battery) then hold back button + power (thats fastboot) plug in ur phone so it says fastboot usb then open fastboot command window and type -
fastboot erase recovery
then type -
fastboot flash recovery c:\recovery.img
hopefully it will work and ul 4ext recovery and u can restore a nandroid or flash new rom etc
Sent from my HTC Desire
Click to expand...
Click to collapse
Hi jmcclue -
Thanks for your reply, I'll give it a try.
How do you open the fastboot command window? After i plug in the usb during fastboot nothing on my computer pops up.
Thanks!
Banksy12 said:
Hi jmcclue -
Thanks for your reply, I'll give it a try.
How do you open the fastboot command window? After i plug in the usb during fastboot nothing on my computer pops up.
Thanks!
Click to expand...
Click to collapse
ok click adb & fastboot in my sig to set it up.
u could just click the PB99IMG 4ext recovery in my sig and follow the instructions, u can change it that way too. its well worth setting up adb & fastboot tho
Sent from my HTC Desire
jmcclue said:
ok click adb & fastboot in my sig to set it up.
u could just click the PB99IMG 4ext recovery in my sig and follow the instructions, u can change it that way too. its well worth setting up adb & fastboot tho
Sent from my HTC Desire
Click to expand...
Click to collapse
Okay thanks a lot, just done it now.
I typed in fastboot erase memory and this pops up:
erasing memory....FAILED (remote: partition is not existed!)
Any idea what this means?
I did the second part anyway and it went into recovery fine, i tried to install a zip from sd but it aborted it because it was "bad"
Banksy12 said:
Okay thanks a lot, just done it now.
I typed in fastboot erase memory and this pops up:
erasing memory....FAILED (remote: partition is not existed!)
Any idea what this means?
I did the second part anyway and it went into recovery fine, i tried to install a zip from sd but it aborted it because it was "bad"
Click to expand...
Click to collapse
fastboot erase memory?? i said fastboot erase recovery.
ok.. so u have 4ext recovery now?? what zip did u try to install??
jmcclue said:
fastboot erase memory?? i said fastboot erase recovery.
ok.. so u have 4ext recovery now?? what zip did u try to install??
Click to expand...
Click to collapse
Sorry - Misread it.
jmcclue - That's worked just great though thankyou so much!
Ive installed cyanogen, but I want to install a stock rom for it (this is what i was doing originally)- do I need to unroot it? What are the steps now?
Thanks a ton.
Banksy12 said:
Sorry - Misread it.
jmcclue - That's worked just great though thankyou so much!
Ive installed cyanogen, but I want to install a stock rom for it (this is what i was doing originally)- do I need to unroot it? What are the steps now?
Thanks a ton.
Click to expand...
Click to collapse
If you want it neat and clean to start from beginning, download alpharev downgrade hboot, flash it via fastboot (follow the instructions from site), download 2.3 RUU from htcdev, unpack it and run from your PC.
The previous attempt to return to stock GB ended with failure because you have revolutionary hboot which is write protected and hboot and radio can't be flashed. So, you had the old radio on your device (RADIO-4.05.00.11) and GB needed a newer one and after flashing it didn't want to boot.
With downgrade you will unlock write protection and RUU will overwrite both hboot and radio.
nlooooo said:
If you want it neat and clean to start from beginning, download alpharev downgrade hboot, flash it via fastboot (follow the instructions from site), download 2.3 RUU from htcdev, unpack it and run from your PC.
The previous attempt to return to stock GB ended with failure because you have revolutionary hboot which is write protected and hboot and radio can't be flashed. So, you had the old radio on your device (RADIO-4.05.00.11) and GB needed a newer one and after flashing it didn't want to boot.
With downgrade you will unlock write protection and RUU will overwrite both hboot and radio.
Click to expand...
Click to collapse
Thanks nlooooo i understand it better now.
I'll give it a try
Banksy12 said:
Thanks nlooooo i understand it better now.
I'll give it a try
Click to expand...
Click to collapse
I've just gone to the AlphaRev site to download the patch - i can't figure out which one to download. I currently have
update-cm-7.2.0-RC2-bravo-signed.zip installed (cyanogenmod7)
Thanks!
Banksy12 said:
I've just gone to the AlphaRev site to download the patch - i can't figure out which one to download. I currently have
update-cm-7.2.0-RC2-bravo-signed.zip installed (cyanogenmod7)
Thanks!
Click to expand...
Click to collapse
It's not a patch, it's hboot that you're looking for. It's the last one on table, nicely called "Bravo Downgrader".
nlooooo said:
It's not a patch, it's hboot that you're looking for. It's the last one on table, nicely called "Bravo Downgrader".
Click to expand...
Click to collapse
Hi again, thank you for your reply. I'm new to this and when i ran through the instructions on alpharev, it didnt work so im obviously doing something wrong, and don't want to mess it up so could you please say whether this is the correct way to do it
From the instructions on alpharev its goes as:
1) nandroid backup in recovery - I have 4ext recovery, so i just basically click "backup" right?
2) download bravo_downgrade.img
3) go into hboot (power+back button)
Now this is the bit im confused about:
fastboot flash hboot bravo_alphaspl.img' (change into the correct filename for the HBOOT you downloaded)
4) 'fastboot reboot-bootloader'
5) 'fastboot erase cache'
6) Boot recovery, wipe everything and restore.
I don't see these options available to me, is this because I have 4ext and just need the normal clockworkmod?
Thankyou.
Banksy12 said:
Hi again, thank you for your reply. I'm new to this and when i ran through the instructions on alpharev, it didnt work so im obviously doing something wrong, and don't want to mess it up so could you please say whether this is the correct way to do it
From the instructions on alpharev its goes as:
1) nandroid backup in recovery - I have 4ext recovery, so i just basically click "backup" right?
2) download bravo_downgrade.img
3) go into hboot (power+back button)
Now this is the bit im confused about:
fastboot flash hboot bravo_alphaspl.img' (change into the correct filename for the HBOOT you downloaded)
4) 'fastboot reboot-bootloader'
5) 'fastboot erase cache'
6) Boot recovery, wipe everything and restore.
I don't see these options available to me, is this because I have 4ext and just need the normal clockworkmod?
Thankyou.
Click to expand...
Click to collapse
4) & 5) are fastboot commands.. so make sure u have fastboot set up on ur computer. click adb & fastboot in my sig if u dont.
once setup, download the bravo_downgrade.img and put it in ur C:\ drive on ur computer, then put ur phone into fastboot, hold back button + power and plug in ur phone (usb) so it says "fastboot usb" then open fastboot command window and type -
fastboot flash hboot c:\bravo_downgrade.img
fastboot reboot-bootloader
fastboot erase cache
then boot into recovery and do what u need to do
So, I tried to get the latest Cyanogenmod on my phone.
Resulted in the the process com.android.phone has stopped issue.
FInally managed to get around that but no my phone is stuck with no CWM, no USB Windows fileshare and a HTC bootscreen.
I have searched, and read a lot of posts and the closes thing to recovery is a post on putting on a Nandroid backup for my Y13 (http://forum.xda-developers.com/showthread.php?t=1975140)
But, since I have no USB fileshare I am unable to get it on the phone and start the process.
Can anybody point me in the right direction?
I need to completely wipe and reinstall everything but has no access other that fastboot USB.
What info should I post and how do I find it if more is needed.
smurf69 said:
So, I tried to get the latest Cyanogenmod on my phone.
Resulted in the the process com.android.phone has stopped issue.
FInally managed to get around that but no my phone is stuck with no CWM, no USB Windows fileshare and a HTC bootscreen.
I have searched, and read a lot of posts and the closes thing to recovery is a post on putting on a Nandroid backup for my Y13 (http://forum.xda-developers.com/showthread.php?t=1975140)
But, since I have no USB fileshare I am unable to get it on the phone and start the process.
Can anybody point me in the right direction?
I need to completely wipe and reinstall everything but has no access other that fastboot USB.
What info should I post and how do I find it if more is needed.
Click to expand...
Click to collapse
Download Philz recovery and flash via fastboot. After this go in recovery and mound the sd card and wait 3-4 min. copy your rom on SD card flash the rom and flash the boot.img!
Thant said:
Download Philz recovery and flash via fastboot. After this go in recovery and mound the sd card and wait 3-4 min. copy your rom on SD card flash the rom and flash the boot.img!
Click to expand...
Click to collapse
Thanks Thant!
So, I have downloaded Philz, I think I have flashed the recovery.img file over to the phone from CMD shell window.
I have rebooted my phone to fastboot menu and selectet recovery.
The result is still the same. Just the htc boot screen.
I`m sure I`m doing something wrong but cant figure out how. Philz How to uses USB / PC file transfer so I`m unable to use it as a step by step.
Would really appreciate a step by step command overview. If possible with an explanation so that I learn why I do the different commands. Then I wont be so f.. ignorant about these things anymore. Hopefully
smurf69 said:
Thanks Thant!
So, I have downloaded Philz, I think I have flashed the recovery.img file over to the phone from CMD shell window.
I have rebooted my phone to fastboot menu and selectet recovery.
The result is still the same. Just the htc boot screen.
I`m sure I`m doing something wrong but cant figure out how. Philz How to uses USB / PC file transfer so I`m unable to use it as a step by step.
Would really appreciate a step by step command overview. If possible with an explanation so that I learn why I do the different commands. Then I wont be so f.. ignorant about these things anymore. Hopefully
Click to expand...
Click to collapse
The command to flash the recovery is fastboot flash recovery recovery.img you must to put recovery.img in your fastboot directory and you can run the command fastboot erase cache after this go in bootloader and choice the recovery this is all
Thant said:
The command to flash the recovery is fastboot flash recovery recovery.img you must to put recovery.img in your fastboot directory and you can run the command fastboot erase cache after this go in bootloader and choice the recovery this is all
Click to expand...
Click to collapse
Again, thanks!!
Forgot my phone at work so I`ll have a go tomorrow!
This issue will remain unsolved.
The phone no longer charges so I am unable to start any process what so ever.
Thank you so much for the help I got
smurf69 said:
This issue will remain unsolved.
The phone no longer charges so I am unable to start any process what so ever.
Thank you so much for the help I got
Click to expand...
Click to collapse
there is also a zip with a .bat file to charge in fastboot ...it should all work...as it was said before fastboot flash recovery recovery.img and fastboot erase cache...if nothng works then do the factory reset through bootloader helps often...if not working...hm try to find latest RUU for your CID which ould work...if already on hboot 1.7x only RUU from 3.14 and up would work
One-X-master said:
there is also a zip with a .bat file to charge in fastboot ...it should all work...as it was said before fastboot flash recovery recovery.img and fastboot erase cache...if nothng works then do the factory reset through bootloader helps often...if not working...hm try to find latest RUU for your CID which ould work...if already on hboot 1.7x only RUU from 3.14 and up would work
Click to expand...
Click to collapse
Thanks, but the phone is completely dead and unable to boot.
There is no power and the phone won`t charge so I guess it`s a gonner.
smurf69 said:
Thanks, but the phone is completely dead and unable to boot.
There is no power and the phone won`t charge so I guess it`s a gonner.
Click to expand...
Click to collapse
Search the forums, there are answers to get your device back to live. Like the charging script.
I have a HTC desire HD hboot-2.00.0029, radio 26.14.04.28_M .I installed on it RUU_Ace_Sense30_S_Orange_UK_3.13.61.5_Radio_12.65.60.29_26.14.04.28_M_release_235697_signed .I turn it off and leave it off like 3 weeks. After that when i wanted to turn it on , it starts on a white background with HTC letters and then turn off and start again doing the same thing.
Can somebody help me?Thanks
that's mean boot lop..right..
is the phone still can go to the bootloader...?
if yes...you can try go to bootloader and try select factory reset from there..
anyway..what the detail state of your phone bootloader..?, i mean..is it already unlocked..?, s-off?, or what...?
are you sure... that's the RUU you flashed is the correct that are suitable for your phone..?
hope this help..
JJeamy said:
that's mean boot lop..right..
is the phone still can go to the bootloader...?
if yes...you can try go to bootloader and try select factory reset from there..
anyway..what the detail state of your phone bootloader..?, i mean..is it already unlocked..?, s-off?, or what...?
are you sure... that's the RUU you flashed is the correct that are suitable for your phone..?
hope this help..
Click to expand...
Click to collapse
yes, i tried to do a factory reset..nothing..still rebooting..
nope..it's locked on orange..s-on..but the thing is that i operated on it after i installed that ruu.
i dont know what to do ..
plaYer25 said:
yes, i tried to do a factory reset..nothing..still rebooting..
nope..it's locked on orange..s-on..but the thing is that i operated on it after i installed that ruu.
i dont know what to do ..
Click to expand...
Click to collapse
so you mean that your phone still in stock right..?
while you installing that RUU before..is that already finish..?
did you already tried flashing that RUU again...?, maybe you can try it to flashing it that RUU again but now is tried flashing it from your bootloader..
to do that you must go to bootloader and select FASTBOOT..then connecting it your phone to pc until indicator is FASTBOOT-USB..then try open cmd from your adb / sdk folder..then typing "fastboot oem rebootRUU"..then after that..you can try running again RUU.exe from your computer..and wait until finish..then just tell me if that success booting or not..
hope this help..
JJeamy said:
so you mean that your phone still in stock right..?
while you installing that RUU before..is that already finish..?
did you already tried flashing that RUU again...?, maybe you can try it to flashing it that RUU again but now is tried flashing it from your bootloader..
to do that you must go to bootloader and select FASTBOOT..then connecting it your phone to pc until indicator is FASTBOOT-USB..then try open cmd from your adb / sdk folder..then typing "fastboot oem rebootRUU"..then after that..you can try running again RUU.exe from your computer..and wait until finish..then just tell me if that success booting or not..
hope this help..
Click to expand...
Click to collapse
after i did this command : "fastboot oem rebootRUU" it appers like a menu(see the picture) What should i do?run again that RUU?write a command before i run it?cheers
are you sure you do that command while your phone connected to pc and it's in bootloader FASTBOOT-USB mode..?
and you sure htc driver at your pc correctly detected your phone..?
if so..just try another fastboot command "fastboot getvar all" and just show me the output of this command..
JJeamy said:
are you sure you do that command while your phone connected to pc and it's in bootloader FASTBOOT-USB mode..?
and you sure htc driver at your pc correctly detected your phone..?
if so..just try another fastboot command "fastboot getvar all" and just show me the output of this command..
Click to expand...
Click to collapse
What should i do?you have all details about my phone!!thank you for helping me!!
plaYer25 said:
What should i do?you have all details about my phone!!thank you for helping me!!
Click to expand...
Click to collapse
firstly remove your phone serial number and imei from the attachment picture...avoid someone can cloning your phone...
you can try download this RUU from here..
after that without connecting your phone to pc..firstly you must find the rom.zip file from that RUU.exe..to do that..
just running that RUU.exe until two steps next..then hold there..do not continued and do not closed that..just let it open..then open your explorer..
C:\Users\[your user name]\AppData\Local\Temp\[here you will find a lot folder like this "{5CAD3393-EEC0-44CE-9F93-BCAA365B77FB}"] ..search the latest folder by date..and inside that folder you will find subfolder like that again..open it..here you will see the rom.zip file..just copied the rom.zip file to another location...then after that you can cancel and close it RUU.exe
rename it the rom.zip file to "PD98IMG.zip" then copied to the root directory of your sd card (do not place it in any folder)..you can using card reader to copied that file..
after that...just put it in back your sd card to your phone..then boot up your phone to bootloader..then let the bootloader check it the PD98IMG.zip file..and wait until they ask to updating it..just confirm it with volume up..then wait until finish and ask you to confirm reboot with pressing power button..after that if your phone is already success a booting normal again..you must remove it the PD98IMG.zip file from your sd card..
just let me know if this work or not...
hope this help..
2928249 5959
i cant find any flder with that name
JJeamy said:
firstly remove your phone serial number and imei from the attachment picture...avoid someone can cloning your phone...
you can try download this RUU from here..
after that without connecting your phone to pc..firstly you must find the rom.zip file from that RUU.exe..to do that..
just running that RUU.exe until two steps next..then hold there..do not continued and do not closed that..just let it open..then open your explorer..
C:\Users\[your user name]\AppData\Local\Temp\[here you will find a lot folder like this "{5CAD3393-EEC0-44CE-9F93-BCAA365B77FB}"] ..search the latest folder by date..and inside that folder you will find subfolder like that again..open it..here you will see the rom.zip file..just copied the rom.zip file to another location...then after that you can cancel and close it RUU.exe
rename it the rom.zip file to "PD98IMG.zip" then copied to the root directory of your sd card (do not place it in any folder)..you can using card reader to copied that file..
after that...just put it in back your sd card to your phone..then boot up your phone to bootloader..then let the bootloader check it the PD98IMG.zip file..and wait until they ask to updating it..just confirm it with volume up..then wait until finish and ask you to confirm reboot with pressing power button..after that if your phone is already success a booting normal again..you must remove it the PD98IMG.zip file from your sd card..
just let me know if this work or not...
hope this help..
Click to expand...
Click to collapse
I cant find the root directory in my sdcard...neither the PD98 imagine
JJeamy said:
firstly remove your phone serial number and imei from the attachment picture...avoid someone can cloning your phone...
you can try download this RUU from here..
after that without connecting your phone to pc..firstly you must find the rom.zip file from that RUU.exe..to do that..
just running that RUU.exe until two steps next..then hold there..do not continued and do not closed that..just let it open..then open your explorer..
C:\Users\[your user name]\AppData\Local\Temp\[here you will find a lot folder like this "{5CAD3393-EEC0-44CE-9F93-BCAA365B77FB}"] ..search the latest folder by date..and inside that folder you will find subfolder like that again..open it..here you will see the rom.zip file..just copied the rom.zip file to another location...then after that you can cancel and close it RUU.exe
rename it the rom.zip file to "PD98IMG.zip" then copied to the root directory of your sd card (do not place it in any folder)..you can using card reader to copied that file..
after that...just put it in back your sd card to your phone..then boot up your phone to bootloader..then let the bootloader check it the PD98IMG.zip file..and wait until they ask to updating it..just confirm it with volume up..then wait until finish and ask you to confirm reboot with pressing power button..after that if your phone is already success a booting normal again..you must remove it the PD98IMG.zip file from your sd card..
just let me know if this work or not...
hope this help..
Click to expand...
Click to collapse
i did that..same thing..(..just restarting...
plaYer25 said:
i cant find any flder with that name
Click to expand...
Click to collapse
what windows version you are using..?
plaYer25 said:
I cant find the root directory in my sdcard...neither the PD98 imagine
Click to expand...
Click to collapse
the root directory is mean just place it that file inside your sd card..don't place it that file in any folder "sdcard\[here the root directory]"
plaYer25 said:
i did that..same thing..(..just restarting...
Click to expand...
Click to collapse
can you more cleared and detailed what you mean is..?
did you mean you are already to do all the step i say to flashing it the PD98IMG.zip file through bootloader from the RUU.exe the link that i give it to you above...but the result is still boot loping..?
can you show me detailed of your bootloder correctly..i mean example like this..
***UNLOCKED***
ACE PVT SHIP S-ON RL
HBOOT - X.XX.XXXX
blah blah
blah blah..
because you say before in your first post is that you already had hboot 2.00.0029 version.. but in your attachment picture above is your hboot still 2.00.0027..which are exactly your hboot version is...?
did you already tried unlocking your bootloder via htcdev.com..?, and what exactly your reason to installing that RUU in your first post above..?
JJeamy said:
what windows version you are using..?
the root directory is mean just place it that file inside your sd card..don't place it that file in any folder "sdcard\[here the root directory]"
can you more cleared and detailed what you mean is..?
did you mean you are already to do all the step i say to flashing it the PD98IMG.zip file through bootloader from the RUU.exe the link that i give it to you above...but the result is still boot loping..?
can you show me detailed of your bootloder correctly..i mean example like this..
***UNLOCKED***
ACE PVT SHIP S-ON RL
HBOOT - X.XX.XXXX
blah blah
blah blah..
because you say before in your first post is that you already had hboot 2.00.0029 version.. but in your attachment picture above is your hboot still 2.00.0027..which are exactly your hboot version is...?
did you already tried unlocking your bootloder via htcdev.com..?, and what exactly your reason to installing that RUU in your first post above..?
Click to expand...
Click to collapse
i have finnished all the steps you told me..nothing still booting loop..after i installed that version i tried to update to another RUU(exactly the RUU you told me to download).
now i have RUU ARA:
hboot-2.00.0027
radio: 26.14.04.28_M
i am using win7.after i follow all your steps the phone is still in booting loop..
plaYer25 said:
i have finnished all the steps you told me..nothing still booting loop..after i installed that version i tried to update to another RUU(exactly the RUU you told me to download).
now i have RUU ARA:
hboot-2.00.0027
radio: 26.14.04.28_M
i am using win7.after i follow all your steps the phone is still in booting loop..
Click to expand...
Click to collapse
that's so weird things...
what if you try too installing that RUU.exe like normal way...i mean just connecting your phone with pc (select FASTBOOT mode from your bootloder) then running that RUU.exe until finish..
if that still fail too...then another way is you can try it to unlocking your bootloader via htcdev.com first..then after that you can continued installing custom recovery like 4ext, twrp or cwm..and then installing custom rom..
to unlock your bootloader via htcdev.com...firstly you must update your hboot version to 2.00.0029...that hboot update file is already in there site..just follow instruction from site it self..
JJeamy said:
that's so weird things...
what if you try too installing that RUU.exe like normal way...i mean just connecting your phone with pc (select FASTBOOT mode from your bootloder) then running that RUU.exe until finish..
if that still fail too...then another way is you can try it to unlocking your bootloader via htcdev.com first..then after that you can continued installing custom recovery like 4ext, twrp or cwm..and then installing custom rom..
to unlock your bootloader via htcdev.com...firstly you must update your hboot version to 2.00.0029...that hboot update file is already in there site..just follow instruction from site it self..
Click to expand...
Click to collapse
i have already tried that...i tried for 3-4 times..same results :booting loop.
i will tomorrow that thing with htc..after i unlock it how can i install a recovery?what rom do you advice me to install?and how?thank you..
plaYer25 said:
i have already tried that...i tried for 3-4 times..same results :booting loop.
i will tomorrow that thing with htc..after i unlock it how can i install a recovery?what rom do you advice me to install?and how?thank you..
Click to expand...
Click to collapse
This so weird...because that you told me with these both RUU that you had already installed is all process had success completed until finish....but what i know is...that's impossible the phone while still in stock condition can received two different stock RUU with different cid num too...accept if your already had a goldcard and flashing it just through bootloader..
Anyway...just unlocking that bootloader first then after success unlocking...i will continued told you what step by step you must to do next...
Now i'm gone a sleep..
Sent from my HTCSensation using Tapatalk
JJeamy said:
This so weird...because that you told me with these both RUU that you had already installed is all process had success completed until finish....but what i know is...that's impossible the phone while still in stock condition can received two different stock RUU with different cid num too...accept if your already had a goldcard and flashing it just through bootloader..
Anyway...just unlocking that bootloader first then after success unlocking...i will continued told you what step by step you must to do next...
Now i'm gone a sleep..
Sent from my HTCSensation using Tapatalk
Click to expand...
Click to collapse
i receive this error when i try to unlock bootloader
... INFO[ERR] Command error !!!
OKAY [ 0.007s]
finished. total time: 0.007s
What the command you type...?
Sent from my HTCSensation using Tapatalk
JJeamy said:
What the command you type...?
Sent from my HTCSensation using Tapatalk
Click to expand...
Click to collapse
fastboot oem get_identifier_token
plaYer25 said:
fastboot oem get_identifier_token
Click to expand...
Click to collapse
Did you already update your hboot to version 2.00.0029 first before running that command..?
if not yet...just download this hboot from here.. then flashing this via bootloader..
to flashing this hboot through bootloader is just the same way as my guide in my #8 post..
Sent from my HTCSensation using Tapatalk