Hi.
I have a rooted s-off desire using alpha rev 1.8.
I'm currently trying to resize the nand partitions using the method on the alpharev.nl site, without a pc. I'm running cm6.1 rom, so I downloaded the n1table zip ready to flash. Its renamed to pb99img.zip on root of sdcard. I've reboot into hboot using volume+down and I'm not quite sure where to go from here. I tried going into recovery and installing zip from SD but it doesnt seem to have worked as when I reboot into rom and check SD storage, it remains the same as before.
I know I must be missing something basic. Anyone know what I'm doing wrong? Cheers.
Sent from my HTC Desire using XDA App
Do NOT continue with what you're doing. Have you even read the instructions on the AlphaRev site? You flash a new MTD table using the fastboot commands of adb:
1) Nandroid backup in recovery.
2) Verify the MD5SUM of the file you downloaded against the one in the table.
3) Flash HBOOT with your phone in fastboot mode (Back+POWER) -> 'fastboot flash hboot bravo_alphaspl.img' (change into the correct filename for the HBOOT you downloaded)
4) 'Fastboot reboot-bootloader'
5) 'Fastboot erase cache'
6) Boot recovery, wipe everything and restore
It´s also working with HBOOT...but I think you have to rename it to PB99IMG.zip (case Sensitiv)
If you have it in your / Filesystem on your SD Card, you will be asked after booting to Bootloader if you want to update.
Answer with "Volume up" or "down"
YOU DO NOT RENAME AN ALPHAREV HBOOT MOD TO PB99IMG
That is for Zip versions of the RUUs and NOTHING to do with AlphaRev
Seriously, read up before you brick your phone
From the Aplha Rev HP:
You can also download the corresponding PB99IMG zipfile, put it on your sdcard, and rename it to PB99IMG.zip. Then start the phone in HBOOT mode (VolDown+POWER) to flash the HBOOT without a PC.
Sorry, if I don´t understand this right...but that´s a fact from his Page
I´m sure Fastboot is the better way...but I tried it like this and it worked
I stand corrected, didn't see they had that option now. My apologies
In which case, you'd download the relevent ZIP file, rename it PB99IMG.zip (not PB99IMG.zip.zip) and put it on the root of our SD card (root - not in any folders)
Then, when you boot into HBOOT it should just pick it up and ask if you want to flash it - you don't go into recovery
no Probs
I never got asked if i wanted to flash the hBOOT
I'm running a rooted HTC desire and i'm trying to load flash the hboot to the oxygen variety
I haven't s-off my phone yet but wanted to use the no PC method outlined above
When i go into hBoot the phone picks up the PB99IMG.zip (saying "checking PB99IMG.zip......") but doen't give me the option to flash the hboot
Am i missing something? Do i have to s-off it the long way first?
Any help would be really appreciated
=]
Yes, you have to S-OFF first before you can change the MTD. It does say on the website:
"If you are already S-OFF, you can get our newest patched HBOOTs from here. (without going through the entire procedure again).
Please read the entire table and pick the partition table with the correct sizes for your ROM. One easy way to switch partition tables, is to nandroid backup,
and verify that the sizes of your backup are indeed the ones listed in the table (or smaller), and restore after flashing hboot."
Any idea if i can choose the Oxygen variation when i use the AlphaRev 1.8 HBOOT reflash utility or will i need to do it again with a PB99IMG.zip after?
the.draconian said:
Any idea if i can choose the Oxygen variation when i use the AlphaRev 1.8 HBOOT reflash utility or will i need to do it again with a PB99IMG.zip after?
Click to expand...
Click to collapse
Do the Alpharev 1.8 Flash first.
Then connect your phone, boot into Fastboot mode, and run the foll:
1) Nandroid backup in recovery.
2) Verify the MD5SUM of the file you downloaded against the one in the table.
3) Flash HBOOT with your phone in fastboot mode (Back+POWER) -> 'fastboot flash hboot bravo_alphaspl.img' (change into the correct filename for the HBOOT you downloaded)
4) 'Fastboot reboot-bootloader'
5) 'Fastboot erase cache'
6) Boot recovery, wipe everything and restore.
Click to expand...
Click to collapse
Again a quote from their site
Edit: Alpharev seems to have taken down the Pb99img method
EddyOS said:
Do NOT continue with what you're doing. Have you even read the instructions on the AlphaRev site? You flash a new MTD table using the fastboot commands of adb:
1) Nandroid backup in recovery.
2) Verify the MD5SUM of the file you downloaded against the one in the table.
3) Flash HBOOT with your phone in fastboot mode (Back+POWER) -> 'fastboot flash hboot bravo_alphaspl.img' (change into the correct filename for the HBOOT you downloaded)
4) 'Fastboot reboot-bootloader'
5) 'Fastboot erase cache'
6) Boot recovery, wipe everything and restore
Click to expand...
Click to collapse
Of course I have read the instructions thoroughly. I would never do anything without reading several times over. As another member pointed out, you can in fact flash from .zip
However it would not work for me, probably a lot of others too, as another member mentioned it has been removed from site.
I have now switched to miui and am not encountering any storage space issues as yet, so I think ill leave it alone for awhile. Thanks for everyone's input and help.
Cheers.
Sent from my HTC Desire using XDA App
Anyone got this to work? Ive tried following the instructions (I have s-off and have repartitioned my HBOOT previously with ADB) and it just says no image found when I load into fastboot
When I try to do it from the SD card on mine, it finds the PB99IMG.zip file but then says "Model ID invalid. Update Fail!" then asks if I want to reboot or not. Rebooting just performs a normal reboot with no changes.
jordan.harris01 said:
When I try to do it from the SD card on mine, it finds the PB99IMG.zip file but then says "Model ID invalid. Update Fail!" then asks if I want to reboot or not. Rebooting just performs a normal reboot with no changes.
Click to expand...
Click to collapse
Obviously, you're trying to install a file meant for another device! That's a very dangerous thing to do!
It's the PB99IMG.zip for the Oxygen HBOOT. How can it be for the wrong device? I'm s-off, running Oxygen RC7.
jordan.harris01 said:
It's the PB99IMG.zip for the Oxygen HBOOT. How can it be for the wrong device? I'm s-off, running Oxygen RC7.
Click to expand...
Click to collapse
At least that's what the error code means anyway..Is there a reason why you cant fastboot flash the img?
Yea, I assumed that. I can't seem to get fastboot working again on my machine. It was working but I haven't had much time to look into what happened. ADB devices brings up the serial number but fastboot won't detect the phone. I was just trying to do this while I was at work and I don't have access to fastboot here.
jordan.harris01 said:
Yea, I assumed that. I can't seem to get fastboot working again on my machine. It was working but I haven't had much time to look into what happened. ADB devices brings up the serial number but fastboot won't detect the phone. I was just trying to do this while I was at work and I don't have access to fastboot here.
Click to expand...
Click to collapse
Adb and fastboot detect the phone at different phases. If one detects, at that point, the other wouldnt.
Are u sure you're trying out fastboot in fastboot mode (poweroff, Back key+Power On)? At that point fastboot should work..Even most severely damaged phones are detected in fastboot
Yes, the phone is in fastboot when I'm trying this. I'm wondering if something happened to the fastboot driver or something. Either way, I'll look into it at some point.
Related
Hi, I'm trying to install alphaRev because from what I've read it enables s-off and provides a modified partition table. Currently I run
Oxygen rc7
Clockwork recovery 2.5.0.7
Hboot 0.93
AlphaRev says to download the alpharev zip file for oxygen, remake it and put it on my sd, which I've done. Then it says to go into hboot and install. How do I install the alphaRev zip from my sd in hboot!?
Any help!
The initial S-OFF needs to be done via a bootable CD, you then change the partition table after this should you need to. You need to read the instructions closer
EddyOS said:
The initial S-OFF needs to be done via a bootable CD, you then change the partition table after this should you need to. You need to read the instructions closer
Click to expand...
Click to collapse
hmm, OK. It's quite tricky for me as I have fairly rubbish dyslexia and so I get confused when reading
What advantages does S-Off provide? I will try that now and report back
If you don't know what it does don't even do it! Read up on it more before doing anything as it can potentially brick your phone with no chance of repair
EddyOS said:
If you don't know what it does don't even do it! Read up on it more before doing anything as it can potentially brick your phone with no chance of repair
Click to expand...
Click to collapse
I was less interested in the S-Off option, but wanted the modified partition table that AlphaRev offers over the stock HBoot. Apparently it providers a fair bit more space for apps on the phone. But, alas, I got Alpharevs flashing program and it worked fine. I am now running AlphaRev Hboot 0.93.0001 with S-Off (well, from what I think I read, S-Ignored!)
So, next question is, how do I get around to installing the modified partition tables provided on the AlphaRev site, or did this automatically get done as a part of the flashing process I have just done? I'm not trying to be lazy, I have honestly read around, it's just quite confusing (especially for me) and I find it easier when someone explains it in Layman's terms!
Direct from alpharev.nl and must be done in Fastboot:
1) Nandroid backup in recovery.
2) Verify the MD5SUM of the file you downloaded against the one in the table.
3) Flash HBOOT with your phone in fastboot mode (Back+POWER) -> 'fastboot flash hboot bravo_alphaspl.img' (change into the correct filename for the HBOOT you downloaded)
4) 'fastboot reboot-bootloader'
5) 'fastboot erase cache'
6) Boot recovery, wipe everything and restore.
jordan.harris01 said:
Direct from alpharev.nl and must be done in Fastboot:
1) Nandroid backup in recovery.
2) Verify the MD5SUM of the file you downloaded against the one in the table.
3) Flash HBOOT with your phone in fastboot mode (Back+POWER) -> 'fastboot flash hboot bravo_alphaspl.img' (change into the correct filename for the HBOOT you downloaded)
4) 'fastboot reboot-bootloader'
5) 'fastboot erase cache'
6) Boot recovery, wipe everything and restore.
Click to expand...
Click to collapse
Thank a lot for detail introduce
NP. As I said, it was copied directly from the alpharev site. Keep in mind that this can possibly brick your phone if the checksum doesn't match or something goes wrong during the flash.
jordan.harris01 said:
NP. As I said, it was copied directly from the alpharev site. Keep in mind that this can possibly brick your phone if the checksum doesn't match or something goes wrong during the flash.
Click to expand...
Click to collapse
Ok, I didn't actually get that far I did this technique:
You can also download the corresponding PB99IMG zipfile, put it on your sdcard, and rename it to PB99IMG.zip. Then start the phone in HBOOT mode (VolDown+POWER) to flash the HBOOT without a PC.
Click to expand...
Click to collapse
I downloaded "PB99IMG_bravo_oxygen.zip" renamed it to "PB99IMG.zip". I booted into Hboot, it asked me if i'd like to update, so I said yes which it did... now... it's getting stuck on the Alpharev why so serious splash screen.
I wonder if I just bricked my phone..............................
Did you just reboot it after the flash? I'm not sure how to flash it via the SD card but something tells me that you still need a wipe and reinstall. Your ROM might not fit in the new partition. but I honestly have no idea, just trying to give you possible ideas. Wait till someone else can confirm.
So, yah, effectively looks like i've done something bad. AlphaRev installed fine and s-off is ok. Just the last steps I took to install a custom partition seem to have gone... wrong...
Basically, turning it on as normal and it gets stuck on the AlphaRev "why so serious" splash screen. It can operate fine in Hboot and Recovery mode... so what's the best way out of this mess?
EDIT: More info!
So, after flashing AlphaRev it displayed:
--Alpharev--
Bravo PVT1 Ship S-Off
Hboot 0.93.0001
etc...
Click to expand...
Click to collapse
I then used the SD Card flash means of install the Oxygen Partition table through Hboot. After this is when it gets stuck on the AlphaRev splash screen. It works in Hboot and Recovery. In the former it now shows
AlphaRev Oxygen
Bravo PVT1 Ship S-Off
HBOOT 0.93.1000
Click to expand...
Click to collapse
It looks to me like the flash was successful, you just need to wipe and reinstall the ROM. In this case, Oxygen or Redux..the only 2 that will fit in that partition.
jordan.harris01 said:
It looks to me like the flash was successful, you just need to wipe and reinstall the ROM. In this case, Oxygen or Redux..the only 2 that will fit in that partition.
Click to expand...
Click to collapse
You know what, you're right (I think). I have been an absolute spanner and forgot to actually re-install Oxygen after installing the new partition. Just re-did RC7 (thank the lord I still had the zip on my SD) and we're back alive again.
I was scared, oh so scared
Good that you're back up and running.
jordan.harris01 said:
Good that you're back up and running.
Click to expand...
Click to collapse
Well, there you go, I learnt from a mistake. It can be scary when things don't go to plan, but i'm quite happy I managed to get it all installed and running. I just have to work out how to change the splashscreen to something else.
I saw the instructions about fastboot... but I don't exactly understand where the terminal is that I have to use. Do I connect it to my PC is fastboot mode and use CMD?
Yes, you use CMD. There is a tutorial for Fastboot telling you all the stuff you need to install to get it up and running. For flashing a new Splash screen you should look into the Android Flasher utility somewhere on XDA. It's basically Fastboot with a GUI so you can easily flash HBOOT, custom splash, radios and something else that I forget.
This is why you READ before doing anything. You've been lucky...
jordan.harris01 said:
Yes, you use CMD. There is a tutorial for Fastboot telling you all the stuff you need to install to get it up and running. For flashing a new Splash screen you should look into the Android Flasher utility somewhere on XDA. It's basically Fastboot with a GUI so you can easily flash HBOOT, custom splash, radios and something else that I forget.
Click to expand...
Click to collapse
Hmmm... well I got the flashing program, but whilst it has changed the splash screen... it's not to the one I defined! Gone is old Why So Serious man... but he's been replaced by some little green men riding skateboards.
I was trying to use this splash!
http://forum.xda-developers.com/attachment.php?attachmentid=409882&d=1285773683
Might be the wrong format/height/size. Im'a fiddle more. I'll fix it until it breaks.
Maybe just try it again or ask in that the Android Flasher thread. I had no problem having it flash my image. Is the image the proper file format?
Think it needs to be BMP.
Got it working fine, was the wrong dimensions I believe. However, the app itself is about as stable as a woman on her period. It crashes every few minutes with unhandled exceptions
Hi,
I tried to flash the standard HTC RUU so that i could send it in for repair.
It said that it couldn't flash and gave me error code 140.
Now whenever i turn on my phone it goes straight to fastboot mode which i think means there is no rom on the phone.
However the RUU overwrote my recovery and i dont have an sd reader to put a recovery update.zip on the sd card.
I want to do this so i can try and flash a rom to allow me to boot and try the RUU again.
Is there any way i can either copy files to the sd card or flash a recovery img from hboot, fastboot or recovery?
i tried using "fastboot flash recovery c:\recovery.img" but it just hangs the terminal, any idea why?
Thanks
this looks like it could help
http://forum.xda-developers.com/showthread.php?t=531310
can anyone clarify where exactly i enter the commands.
Im in recovery (black screen with red triangle).
thanks
Not sure if that will help but you enter those commands through ABD in the CMD terminal on your PC.
I'm not sure on this but your fastboot flash might be hanging because your file might need to be in your tools folder within your Android SDK folder.
no that didnt help. I think im gonna have to wait until tomorrow and buy a card reader
thanks
With flashing an ruu you are s-on and you cannot use fastboot any more.
Make a goldcard with linux (as far as i understand you cannot boot into your phone's os any more):
http://www.nazriawang.com/2010/04/how-to-create-goldcard-with-ubuntu.html
Then put this in your desire and try to flash ruu again. It should work now.
I know that i can use the RUU because i've used it before. I think it failed because i was S off (im not sure how i was meant to S on first). I think i need to:
1. copy update.zip to sd card with a recovery in it, and a rooted rom
2. boot to recovery via update.zip
3. flash a rooted rom
4. boot into rom and then flash RUU using the exe
Is this correct? as far as i know i have to be in android to use the RUU, is this correct? If i could flash it from recovery it would save me doing step 3.
thanks
Sorry, but i do not understand you...
Please answer these questions first:
Can you boot into clockworkmod or amonra recovery?
Can you start your rom?
Which hboot do you use?
And flashing failed because of cid error i think? So why don't you create goldcard and try to flash ruu again? The programm will tell exactly what to do.
no, i can only get into the blue basic recovery. This is why i need to put update zip onto the sd card so i can access amonra.
I cant start my rom. when i turn it on normally it goes straight to the fastboot screen with 3 androids at the bottom.
HBOOT is 0.80.0000
Flashing didnt fail because of CID error because i brought my phone unlocked and i have used this exact same RUU before (its the standard HTC signed one). i dont understand how a goldcard would help as i need to be booted into a rom before i can flash the RUU. I dont think i can do it from recovery?
Thanks
"I know that i can use the RUU because i've used it before. I think it failed because i was S off (im not sure how i was meant to S on first). I think i need to:"
You don't have to be S-ON to be able to flash a RUU. The actual RUU will override anything you have done to "jailbreak" your phone: ROOT, S-OFF, Custom HBOOT, Custom Recovery (Amon RA or CWM) and restore you to basic (you'll have none of the above). This is why it is used.
If you have tried to flash the RUU and get the error, you are more than probably not ROOT-ed and S-OFF anymore so you can't install a CUSTOM ROM. This is what makes the problems even harder.
The error you got: Error 140 is Bootloader version error.
Read the second post from http://forum.xda-developers.com/showthread.php?t=880268 and try to extract the PB99IMG.zip from your RUU and try to flash it from card in boot.
EDIT: Also be sure (I don't know how ) if the RUU you got has the same bootloader version as your phone. I read that this is a kind of incompatibility if it is lower than your version.
You should get the latest WWE 2.29.405.5 RUU. I think this should be compatible. Extract the PB99 and put it on root of SD.
LEDIT: if you want to mount your SD card try this http://forum.xda-developers.com/showthread.php?t=531310. Maybe it helps you.
Ive tried it with RUU RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4. 06.00.02_2_release_126984_signed.exe
It gives me an error "Main version is older!"
do you think this means i should try the newer version you recommended or the older version (RUU_Bravo_HTC_WWE_1.15.405.4_Radio_32.30.00.28U_4. 05.00.11_release_122704.exe)
Thanks for your help
That has worked perfectly with the RUU you recommended. I will be keeping that image on my SD card to avoid this happening again.
Thanks
jbaldwinroberts said:
That has worked perfectly with the RUU you recommended. I will be keeping that image on my SD card to avoid this happening again.
Thanks
Click to expand...
Click to collapse
I'm glad I was able to help you and that you resolved your problem.
I have a Tmobile G2 rooted running Gingervillian (gingerbread 2.3.1) and I tried to install the Desire z hboot to get the Sense ui.
I followed the steps here, "http://www.youtube.com/watch?v=ogZfSWLlvPg"
HERES THE PROCEDURE OF WHAT I DID:
After updating the PC10IMG.zip (Desire Z hboot) folder to the root of my G2, I was stuck on the HTC logo screen after updating. So I followed what the guy said in the video, deleted the PC10IMG file in my SD card then rebooted my phone.
After rebooting my phone, I was booted back same rom. So I flash/recovery my phone through Rom Manager and tried rebooting my phone to clockwork mod recovery mode.
After rebooting, I didn't go to Clockwork Mod but to FASTBOOT screen? I select "bootloader" and it goes to a quick load that says something like "SD loading, no image or wrong image". I select "Recovery" then it goes to the HTC logo for a split second then I'm back to FASTBOOT screen again.
This is the info on the fasboot screen? don't know if that'll help:
Vision pvt eng S-off
Hboot-0.84.2000 (pc1010000)
Microp-0425
Radio-26.02.15_m2
eMMC-boot
Sep 8 2010, 15:65:38
So now, I don't know what to do and my questions are:
1.) Is there a way to go back to the G2 hboot?
2. Can I still fix this and procedure on and install new roms on recovery clockwork mode, using Desire Z hboot? (as the video did)
Please help a brother out I'm still a noob and still learning. If this is in the wrong place, please move it to the correct place.
Anyone? if it seems confusing, please ask questions or if I need to provide more information. I really need help with this. Any suggestions will help.
Zedomax's guide are outdated, he never updated them when new methods surfaced.
Try a downgrade
http://www.youtube.com/watch?v=VdWt65tUBVc
tarroyo said:
Zedomax's guide are outdated, he never updated them when new methods surfaced.
Try a downgrade
http://www.youtube.com/watch?v=VdWt65tUBVc
Click to expand...
Click to collapse
would any PP99IMG.zip file work? And do I basically put it in the SD's root and put it into the boot menu to update the file?
Thanks
by the way, is this compatible with G2s?
don´t put the pp99img.zip on your sd !
do something different:
download a recovery.img (3.0.2.4 for vision):
http://forum.xda-developers.com/wik...sion#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
be sure to remove any pc10img.zip or so from your sdcard. then put your phone in fastboot mode (power & tp-wake) connect it to pc and flash the recovery through fastboot by typing: fastboot flash recovery recovery.img
after that you should be able to enter recovery. be sure to wipe before installing a new rom...
hoffmas said:
don´t put the pp99img.zip on your sd !
do something different:
download a recovery.img (3.0.2.4 for vision):
http://forum.xda-developers.com/wik...sion#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
be sure to remove any pc10img.zip or so from your sdcard. then put your phone in fastboot mode (power & tp-wake) connect it to pc and flash the recovery through fastboot by typing: fastboot flash recovery recovery.img
after that you should be able to enter recovery. be sure to wipe before installing a new rom...
Click to expand...
Click to collapse
I'm assuming I need to do ADB? If so, Is there a way for Mac ios
prototype2 said:
I'm assuming I need to do ADB? If so, Is there a way for Mac ios
Click to expand...
Click to collapse
Yes, you can run adb on a Mac. See the link to my adb guide in my signature (assuming you're not viewing from the XDA app, which doesn't show the full sig).
Sent from my Desire Z running CM7.
Okay, just to make it clear (I am a "step by step" guy when it comes to technical computer/phone stuff.), from my understanding:
1. Download the recovery.img (3.0.2.4 for vision) and put it in the root of my SD card.
2. Delete any pc10img.zip files from SD card.
3. Turn phone off and then turn phone onto FASTBOOT mode by holding power/volume down/camera or power and tp-wake? (Btw what's tp-wake? and during this process, is the phone in fastboot screen mode while I'm about to type the "flashboot flash recovery recovery.img"?
4. Connect to computer, open up terminal (Mac) and do the ADB process and type in "fastboot flash recovery recovery.img"
5. Wipe clean and install new rom in recovery mode? (Clockwork Mod recovery mode?)
PLEASE correct my steps or add in any steps that I'm missing. I bought my phone rooted so I never went through these steps before. Anyways please correct me, I don't want to ruin my phone anymore than it is already.
anyone can review my steps?
good morning
ad step 1: don´t put it onto your sd; put it into the adb tool folder on your pc !
ad step 3: tp-wake = the square button at the bottom of your phone (the one that acts like a mouse); to enter fastboot mode press power & tp-wake
...the phone should be in fastboot mode while typing the command.
before you type "fastboot flash recovery recovery.img" type "fastboot devices" and look if your phone shows up... if so go ahead with flashig the recovery (by the way, you may have to rename the recovery file)
step 4 and 5 look fine...
good luck
okay, I will try it in a little bit here.
In FASTBOOT USB mode, it wont recognize my device but when my device is fully on, adb works.
I get when I type "flashboot devices" (while the phone is on FASTBOOT) in terminal and get:
"-bash: fastboot: command not found"
By the way, I renamed the downloaded flash to "recovery.img" and put that file in the "platform-tools". Don't know if that'll work.
The "fastboot" command should be on your PC in the same folder as the "adb" command. Where did you get adb from, did you install the SDK and platform tools, or something cut-down ?
Sent from my Desire Z running CM7.
hm... that means that you do not have fastboot installed. maybe google for fastboot on mac, because i have a linux system... so i can´t help you in that point.
other thing you could do is following this guide (it´s a pc10img.zip with dz hboot and clockwork recovery):
http://www.virtuousrom.com/2011/06/t-mobile-g2-users-migrating-to-desirez.html
but first i would try the fastboot method - it´s safer.
Okay, I got the fastboot devices to read my phone. But it cannot load my recovery.img?
This is what got when I typed in "fastboot flash recovery recovery.img" :
error: cannot load 'recovery.img'
rename it to recovery and try again...
It's not loading the img file for some reason..
prototype2 said:
It's not loading the img file for some reason..
Click to expand...
Click to collapse
http://wiki.cyanogenmod.com/wiki/Fastboot
or use the virtuous link...
hoffmas said:
http://wiki.cyanogenmod.com/wiki/Fastboot
or use the virtuous link...
Click to expand...
Click to collapse
that link isn't working
Hi
I've looked on here already to try to find a (working) solution for my problem but haven't so far. My HTC desire was
downgraded from ICS to a gingerbread rom successfully - however - upon trying to unlock (unbrand) my phone the
software was stopping this so i tried to install a stock rom on it via usb cable. It downloaded successfully and rebooted.
But when it restarted it stuck on the "htc" loading screen. The only way i can turn it off is to remove the battery - also
when i try to enter recovery it just sticks on the HTC screen too.
This is what it says on the HBOOT screen:
--------------------------------------------------------
-Revolutionary-
BRAVO PVT1 SHIP S-OFF
HBOOT-6.93.1002
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-4.05.00.11
SD CHECKING...
Loading ...[PB99DIAG.ZIP]
No image!
Loading ...[PB99DIAG.ZIP]
No image!
Loading ...[PB99IMG.ZIP]
No image!
Loading ...[PB99IMG.nbh]
No image or wrong image!
-----------------------------------------------
If anyone could help me with this it would be great, thanks!
have u tried flashing new recovery via fastboot commands?
u can click PB99IMG 4ext recovery in my sig, extract it and put the recovery.img in ur c:\ drive on ur computer then turn off ur phone (pull battery) then hold back button + power (thats fastboot) plug in ur phone so it says fastboot usb then open fastboot command window and type -
fastboot erase recovery
then type -
fastboot flash recovery c:\recovery.img
hopefully it will work and ul 4ext recovery and u can restore a nandroid or flash new rom etc
Sent from my HTC Desire
jmcclue said:
have u tried flashing new recovery via fastboot commands?
u can click PB99IMG 4ext recovery in my sig, extract it and put the recovery.img in ur c:\ drive on ur computer then turn off ur phone (pull battery) then hold back button + power (thats fastboot) plug in ur phone so it says fastboot usb then open fastboot command window and type -
fastboot erase recovery
then type -
fastboot flash recovery c:\recovery.img
hopefully it will work and ul 4ext recovery and u can restore a nandroid or flash new rom etc
Sent from my HTC Desire
Click to expand...
Click to collapse
Hi jmcclue -
Thanks for your reply, I'll give it a try.
How do you open the fastboot command window? After i plug in the usb during fastboot nothing on my computer pops up.
Thanks!
Banksy12 said:
Hi jmcclue -
Thanks for your reply, I'll give it a try.
How do you open the fastboot command window? After i plug in the usb during fastboot nothing on my computer pops up.
Thanks!
Click to expand...
Click to collapse
ok click adb & fastboot in my sig to set it up.
u could just click the PB99IMG 4ext recovery in my sig and follow the instructions, u can change it that way too. its well worth setting up adb & fastboot tho
Sent from my HTC Desire
jmcclue said:
ok click adb & fastboot in my sig to set it up.
u could just click the PB99IMG 4ext recovery in my sig and follow the instructions, u can change it that way too. its well worth setting up adb & fastboot tho
Sent from my HTC Desire
Click to expand...
Click to collapse
Okay thanks a lot, just done it now.
I typed in fastboot erase memory and this pops up:
erasing memory....FAILED (remote: partition is not existed!)
Any idea what this means?
I did the second part anyway and it went into recovery fine, i tried to install a zip from sd but it aborted it because it was "bad"
Banksy12 said:
Okay thanks a lot, just done it now.
I typed in fastboot erase memory and this pops up:
erasing memory....FAILED (remote: partition is not existed!)
Any idea what this means?
I did the second part anyway and it went into recovery fine, i tried to install a zip from sd but it aborted it because it was "bad"
Click to expand...
Click to collapse
fastboot erase memory?? i said fastboot erase recovery.
ok.. so u have 4ext recovery now?? what zip did u try to install??
jmcclue said:
fastboot erase memory?? i said fastboot erase recovery.
ok.. so u have 4ext recovery now?? what zip did u try to install??
Click to expand...
Click to collapse
Sorry - Misread it.
jmcclue - That's worked just great though thankyou so much!
Ive installed cyanogen, but I want to install a stock rom for it (this is what i was doing originally)- do I need to unroot it? What are the steps now?
Thanks a ton.
Banksy12 said:
Sorry - Misread it.
jmcclue - That's worked just great though thankyou so much!
Ive installed cyanogen, but I want to install a stock rom for it (this is what i was doing originally)- do I need to unroot it? What are the steps now?
Thanks a ton.
Click to expand...
Click to collapse
If you want it neat and clean to start from beginning, download alpharev downgrade hboot, flash it via fastboot (follow the instructions from site), download 2.3 RUU from htcdev, unpack it and run from your PC.
The previous attempt to return to stock GB ended with failure because you have revolutionary hboot which is write protected and hboot and radio can't be flashed. So, you had the old radio on your device (RADIO-4.05.00.11) and GB needed a newer one and after flashing it didn't want to boot.
With downgrade you will unlock write protection and RUU will overwrite both hboot and radio.
nlooooo said:
If you want it neat and clean to start from beginning, download alpharev downgrade hboot, flash it via fastboot (follow the instructions from site), download 2.3 RUU from htcdev, unpack it and run from your PC.
The previous attempt to return to stock GB ended with failure because you have revolutionary hboot which is write protected and hboot and radio can't be flashed. So, you had the old radio on your device (RADIO-4.05.00.11) and GB needed a newer one and after flashing it didn't want to boot.
With downgrade you will unlock write protection and RUU will overwrite both hboot and radio.
Click to expand...
Click to collapse
Thanks nlooooo i understand it better now.
I'll give it a try
Banksy12 said:
Thanks nlooooo i understand it better now.
I'll give it a try
Click to expand...
Click to collapse
I've just gone to the AlphaRev site to download the patch - i can't figure out which one to download. I currently have
update-cm-7.2.0-RC2-bravo-signed.zip installed (cyanogenmod7)
Thanks!
Banksy12 said:
I've just gone to the AlphaRev site to download the patch - i can't figure out which one to download. I currently have
update-cm-7.2.0-RC2-bravo-signed.zip installed (cyanogenmod7)
Thanks!
Click to expand...
Click to collapse
It's not a patch, it's hboot that you're looking for. It's the last one on table, nicely called "Bravo Downgrader".
nlooooo said:
It's not a patch, it's hboot that you're looking for. It's the last one on table, nicely called "Bravo Downgrader".
Click to expand...
Click to collapse
Hi again, thank you for your reply. I'm new to this and when i ran through the instructions on alpharev, it didnt work so im obviously doing something wrong, and don't want to mess it up so could you please say whether this is the correct way to do it
From the instructions on alpharev its goes as:
1) nandroid backup in recovery - I have 4ext recovery, so i just basically click "backup" right?
2) download bravo_downgrade.img
3) go into hboot (power+back button)
Now this is the bit im confused about:
fastboot flash hboot bravo_alphaspl.img' (change into the correct filename for the HBOOT you downloaded)
4) 'fastboot reboot-bootloader'
5) 'fastboot erase cache'
6) Boot recovery, wipe everything and restore.
I don't see these options available to me, is this because I have 4ext and just need the normal clockworkmod?
Thankyou.
Banksy12 said:
Hi again, thank you for your reply. I'm new to this and when i ran through the instructions on alpharev, it didnt work so im obviously doing something wrong, and don't want to mess it up so could you please say whether this is the correct way to do it
From the instructions on alpharev its goes as:
1) nandroid backup in recovery - I have 4ext recovery, so i just basically click "backup" right?
2) download bravo_downgrade.img
3) go into hboot (power+back button)
Now this is the bit im confused about:
fastboot flash hboot bravo_alphaspl.img' (change into the correct filename for the HBOOT you downloaded)
4) 'fastboot reboot-bootloader'
5) 'fastboot erase cache'
6) Boot recovery, wipe everything and restore.
I don't see these options available to me, is this because I have 4ext and just need the normal clockworkmod?
Thankyou.
Click to expand...
Click to collapse
4) & 5) are fastboot commands.. so make sure u have fastboot set up on ur computer. click adb & fastboot in my sig if u dont.
once setup, download the bravo_downgrade.img and put it in ur C:\ drive on ur computer, then put ur phone into fastboot, hold back button + power and plug in ur phone (usb) so it says "fastboot usb" then open fastboot command window and type -
fastboot flash hboot c:\bravo_downgrade.img
fastboot reboot-bootloader
fastboot erase cache
then boot into recovery and do what u need to do
Help. My phone is stuck in a boot loop. No recovery, won't take one even when I flash multiple ways. Won't take a rom. S-off. Was rooted with Revolutionary, but since it wouldn't take a ROM or recovery I tried to unroot. Was able to remove the "Revolutionary" watermark, change hboot from 6.16 to 2.16.0001. Tried installing ruu which is what removed the Revolutionary and changed back hboot.
Here's what I have now:
Supersonic evt2-3 ship s-off
hboot 2.16.0001
Radio 2.15.00.0808
Any help! Thanks.
Looks you might have to get a PC36IMG.zip on your sdcard and then flash that through bootloader
Ideally, put on a froyo PC36IMG so that rerooting is easier if you want to do it again
So what happens when you try to select Recovery from Hboot?
The advice is free....the bandwidth, not so much
Still boot looping...
CNexus said:
Looks you might have to get a PC36IMG.zip on your sdcard and then flash that through bootloader
Ideally, put on a froyo PC36IMG so that rerooting is easier if you want to do it again
Click to expand...
Click to collapse
Already tried that...
FinZ28 said:
So what happens when you try to select Recovery from Hboot?
The advice is free....the bandwidth, not so much
Click to expand...
Click to collapse
All I get is the white "HTC EVO 4G" boot screen. When I flash a custom recovery, everything goes as expected, but still can't access recovery.
You will have to go through all the bootloader ruu's till you find the one that works. Good luck I had the same issue and ended up selling it on eBay and the buyer finally got it working.
Sent from my PC36100 using xda app-developers app
jlmancuso said:
You will have to go through all the bootloader ruu's till you find the one that works. Good luck I had the same issue and ended up selling it on eBay and the buyer finally got it working.
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
Ok. I tried every ruu I could find. Problem remains. Also, s-off never turns to s-on. Tried flashing contents of stock rom separately. Everything appears to flash ok, but same result: no recovery, no rom. Any ideas?
What I think I need is a method to nand unlock via fastboot or hboot. Anyone know of such a thing? Anyone have any other ideas? Besides what I've already done? Thanks...
mabulok said:
What I think I need is a method to nand unlock via fastboot or hboot. Anyone know of such a thing? Anyone have any other ideas? Besides what I've already done? Thanks...
Click to expand...
Click to collapse
S-off is nand-unlocked...run an ruu (any version), as soon as it opens, press windowsKey+R and type "%temp%" then *enter
Now sort the files by date modified and search in the most recent folders for a file called "rom.zip", as soon as you find that copy it to your desktop
Rename the rom.zip to "PC36IMG.zip" and place it on the root of your phones sdcard (you may need to reformat your sdcard to FAT32, make a backup if you need to do this)
Now put the sdcard in your phone, pull out the battery and go into bootloader (VolDown+Power) , the bootloader should find it and commence the update process back to stock unrooted, follow the prompts and press power when necessary
Okay, tried that...
CNexus said:
S-off is nand-unlocked...run an ruu (any version), as soon as it opens, press windowsKey+R and type "%temp%" then *enter
Now sort the files by date modified and search in the most recent folders for a file called "rom.zip", as soon as you find that copy it to your desktop
Rename the rom.zip to "PC36IMG.zip" and place it on the root of your phones sdcard (you may need to reformat your sdcard to FAT32, make a backup if you need to do this)
Now put the sdcard in your phone, pull out the battery and go into bootloader (VolDown+Power) , the bootloader should find it and commence the update process back to stock unrooted, follow the prompts and press power when necessary
Click to expand...
Click to collapse
Tried your method using the rom from an ruu. Still s-off, although everything appeared to have updated. I've done this previously, but not extracting the rom.zip from an ruu. Each time the hboot updates, or downgrades, depending on the ruu, but s-off remains. No rom, no recovery...
Next...
Sometimes the problem is solved by wiping the recovery partition first, and then re-flashing it. To do that, you would need a Hboot where you could run fastboot commands, since you cannot boot into a Rom.
You can try upgrading your Hboot, then unlocking the bootloader using the Htcdev site, so that you can run the fastboot commands. If it fails on the new Hboot, then it can probably be flashed back to whatever Hboot you have, since you're S-OFF.
I've included the Hboot file that you would need for the upgrade. You would first run the PC36IMG file throught the bootloader, then reboot the phone. If the Hboot changes, then you should go to the Htcdev site and try to unlock the bootloader.
There are some other steps that follows, but there's no point of giving them to you now and complicating things unless the initial steps work first.
Update
shortydoggg said:
Sometimes the problem is solved by wiping the recovery partition first, and then re-flashing it. To do that, you would need a Hboot where you could run fastboot commands, since you cannot boot into a Rom.
You can try upgrading your Hboot, then unlocking the bootloader using the Htcdev site, so that you can run the fastboot commands. If it fails on the new Hboot, then it can probably be flashed back to whatever Hboot you have, since you're S-OFF.
I've included the Hboot file that you would need for the upgrade. You would first run the PC36IMG file throught the bootloader, then reboot the phone. If the Hboot changes, then you should go to the Htcdev site and try to unlock the bootloader.
There are some other steps that follows, but there's no point of giving them to you now and complicating things unless the initial steps work first.
Click to expand...
Click to collapse
Ok. This didn't work. I was able to flash the hboot, but fastboot commands did not work. I can unlock, and relock the bootloader, flash any ruu, but s-off remains, and still unable to flash a rom or recovery.
Try this and see what happens: Unzip the fastboot.zip file in side a folder on your computer and place the recovery.img file in that same folder on your computer, then open a command prompt from that folder (shift + right click+"open command window here"). From the FASTBOOT USB menu on the phone (Hboot + click on FASTBOOT): type
fastboot erase recovery <ENTER>
fastboot flash recovery recovery.img <ENTER>
fastboot reboot-bootloader <ENTER>
shortydoggg said:
Try this and see what happens: Unzip the fastboot.zip file in side a folder on your computer and place the recovery.img file in that same folder on your computer, then open a command prompt from that folder (shift + right click+"open command window here"). From the FASTBOOT USB menu on the phone (Hboot + click on FASTBOOT): type
fastboot erase recovery <ENTER>
fastboot flash recovery recovery.img <ENTER>
fastboot reboot-bootloader <ENTER>
Click to expand...
Click to collapse
That didn't work either...