Develop Bugs

can't boot into recovery (Inc 2)

i heard that you simply hold down the VOLUME DOWN and POWER BUTTON at the same time to boot into recovery, however whenever i try it does nothing until i release my finger from the POWER BUTTON and then it just boots normally.
what's the proper way of doing this with this phone?
thanks
[EDIT] as stated below, i got it to work. rather then powering off completely and trying it, i ended up just doing a simple reboot and then it worked.

voxigenboy said:
i heard that you simply hold down the VOLUME DOWN and POWER BUTTON at the same time to boot into recovery, however whenever i try it does nothing until i release my finger from the POWER BUTTON and then it just boots normally.
what's the proper way of doing this with this phone?
thanks
Click to expand...
Click to collapse
Did you flash the recovery correctly? Try reflashing it if it won't work.

TB13 said:
Did you flash the recovery correctly? Try reflashing it if it won't work.
Click to expand...
Click to collapse
i got it. apparently i was doing it incorrectly. i was powering down the phone completely and then attempting it.. i finally tried to just 'reboot' the phone and then it worked.

go into "settings" click "power".. and make sure "Fast Boot" is un-checked.

Same here. Even though Fastboot was disabled, I cannot boot into recovery from off state.
If I power up the phone normally, then select restart, and while the phone is rebooting--I press and hold the down volume key; THEN it boots into the menu that gives me the choice of booting into recovery.
Oh well, it worked...
Hello Root, bye-bye bloat!
Waiting for some CM7 goodness to spread our way.

ODIN mode, potential brick

Hey there.
I am boarding an airplane in a couple hours so I am urgently seeking help.
I am using akop b25. I was installing a Google music apk and my phone restarted. It then went into a boot loop.
When I turn the phone in using power+volume down, it boots into a screen like fast boot except it says ODIN mode in red at the top, under the android picture it says downloading.... do not turn off the target. The only thing I can do from here is battery pull or press the power button to activate "start", which just boots the device and back into boot loop.
Can anyone help me with this situation. Thanks alot

Try another button combo. Volume up and power button?
In recovery, reflash the rom. I'm not sure though how an apk install caused boot loops.
Sent from my Galaxy Nexus using xda premium

asb123 said:
Hey there.
I am boarding an airplane in a couple hours so I am urgently seeking help.
I am using akop b25. I was installing a Google music apk and my phone restarted. It then went into a boot loop.
When I turn the phone in using power+volume down, it boots into a screen like fast boot except it says ODIN mode in red at the top, under the android picture it says downloading.... do not turn off the target. The only thing I can do from here is battery pull or press the power button to activate "start", which just boots the device and back into boot loop.
Can anyone help me with this situation. Thanks alot
Click to expand...
Click to collapse
To get to fastboot the button combo is Vol Up + Vol Down + Pwr. From there select recovery and reflash.

xIC-MACIx said:
To get to fastboot the button combo is Vol Up + Vol Down + Pwr. From there select recovery and reflash.
Click to expand...
Click to collapse
Wow, epic face palm. I could have sworn fast boot was volume down only. Okay, I should be fine then.
Thanks a lot guys

[solved]I might have messed up somewhere Stock Recovery

So I downloaded the Stock Recovery from Mr Hofs Collection of Stock Recovery thread in General Section.
I flashed stock recovery, all went well. I attach picture of command prompt to show.
After I flashed it though and went to recovery it just gave me a black screen with a little phone in the middle, in the middle of the little phone was a red triangle with an upside exclamation mark. It was stuck like that for the better part of half an hour(pressed volume down with power, held power alone for minutes on end) nothing. No writing on it nothing.
Luckly as I was busy starting this thread now it just rebooted on its own and went back into the system. Is it totally fixed now or will it give me problems when I go into recovery? Should I go into recovery again?
How do I check if stock recovery is fine now or if there are any problems? I don't want it to hang and/or brick now.
Please if I made a mistake somewhere, tell me what I did wrong for future reference, I don't think I did anything wrong with commands
You can see at bottom of command prompt to, I even tried fastboot devices / adb devices to see if it picks anything up because I get the sound the computer makes when it's connected to USB so the computer at least picked up something.
Should I sell the phone now? lol

Boot again into recovery using the method you described. Once you see the android with red triangle image press and hold the volume up key and then press the power button while keeping the up button pressed. You'll enter the stock recovery.
This is the normal way of booting into stock recovery. You are fine!

umsheikh said:
Boot again into recovery using the method you described. Once you see the android with red triangle image press and hold the volume up key and then press the power button while keeping the up button pressed. You'll enter the stock recovery.
This is the normal way of booting into stock recovery. You are fine!
Click to expand...
Click to collapse
I tried going back into recovery, got to the screen with the triangle and and pressed volume up and power button like you said. Instead of then taking me into stock recovery, it just vibrates and then reboots the phone.

BerndM14 said:
I tried going back into recovery, got to the screen with the triangle and and pressed volume up and power button like you said. Instead of then taking me into stock recovery, it just vibrates and then reboots the phone.
Click to expand...
Click to collapse
hmm...i am running TWRP on GPE so i am not able to test this directly. Let's try one more time, but this time follow these steps:
- go back to recovery and wait for the red triangle screen
- wait for 5 - 10 seconds (don't think this is necessary, but try it anyways)
- this time press both volume up and down keys, and while holding them down press the power button
hopefully this will work. Otherwise i can try on a friends phone in the morning and give you the right combo.

umsheikh said:
hmm...i am running TWRP on GPE so i am not able to test this directly. Let's try one more time, but this time follow these steps:
- go back to recovery and wait for the red triangle screen
- wait for 5 - 10 seconds (don't think this is necessary, but try it anyways)
- this time press both volume up and down keys, and while holding them down press the power button
hopefully this will work. Otherwise i can try on a friends phone in the morning and give you the right combo.
Click to expand...
Click to collapse
Same thing, just vibrates and then reboots

What are you hoping for? You have stock recovery installed now. You seem to have discovered why there are custom ones.

BenPope said:
What are you hoping for? You have stock recovery installed now. You seem to have discovered why there are custom ones.
Click to expand...
Click to collapse
With no recovery options, is that right though? It doesn't show me anything written on the screen and when I press "up volume and power" this should take you to some options, it gives nothing, it just reboots.
Not right then? Or will it still work fine just as it is now for OTAs?
P.S I have tried all methods given by umsheikh, I downloaded quickboot to try it, I did an adb reboot recovery to see if I can go through there, did it manually, shut off, wait a bit, turn back on go to recovery press power, wait 10secs press up and power, nothing, all of them just reboots the phone. It's bugging me lol
If you say it's right though and there is no need for me to actually see the options that it gives and I'll still receive my OTAs etc then fine, I'll leave it then, but I don't think it's right, is it?

Getting into the options is fiddly, but it sounds right. Try fastboot erase cache

BenPope said:
Getting into the options is fiddly, but it sounds right. Try fastboot erase cache
Click to expand...
Click to collapse
Thank you, clearing cache worked, I see options now in recovery :good:

Bootloader Issue

I am having a problem with my phone. I installed CM 11 on it via TWRP 2.6.3 but for some reason the flash didn't workout well and the phone was stuck in the boot animation. The problem is now I am not able to access bootloader because of a faulty vol down button. Before it would work some time, but now have tried it several times but can't do any thing. It just recognizes the power button press and turns the phone on and it gets stuck in bootloader. How do I get in recover to solve this problem.
Any advice?

Kabir999 said:
I am having a problem with my phone. I installed CM 11 on it via TWRP 2.6.3 but for some reason the flash didn't workout well and the phone was stuck in the boot animation. The problem is now I am not able to access bootloader because of a faulty vol down button. Before it would work some time, but now have tried it several times but can't do any thing. It just recognizes the power button press and turns the phone on and it gets stuck in bootloader. How do I get in recover to solve this problem.
Any advice?
Click to expand...
Click to collapse
Press and hold back button + power. That will boot into fastboot then use volume up to navigate

try to keep volume down button
try to keep volume down button harder from the start and after the power button, i have the same prolem and it work after 1-2 tryes

VallNAr said:
try to keep volume down button harder from the start and after the power button, i have the same prolem and it work after 1-2 tryes
Click to expand...
Click to collapse
Or u could use back button + power aswell and get there first try, no point killing the button even more.

No ROM, can't access bootloader, stuck in bootloop

Hey guys,
Ok, this is a tough one for you. I'm actually not 100% convinced that my phone isn't hard bricked. But every where I look for, it says, it's only hard bricked if your phone wont turn on at all and that's just not true in my case. So here's the story:
My volume-up button is kind of screwed, I don't know, what happened to it, but one day, it just started being triggered randomly until it just didn't work at all anymore. It wasn't that big of a problem, since I was still able to change the volume by hitting the volume-down button once and changing the volume by the on screen slider. I was running SkyDragon GPE V5.5 for quite a while now.
But now I wanted to upgrade to Android 6.0, so I downloaded the firmware from here. Next I rebooted to bootloader switched to fastboot and used "sudo fastboot oem rebootRUU" and "sudo fastboot flash zip firmware.zip" twice. So far so good, everything went fine and I actually even am able to see the new Google splashscreen.
So now I want to flash this ROM. But, for some reason, the touchscreen doesn't work anymore, even though it's activated in the CWM Philz Touch GUI settings enabled. Alright, so I "wipe to install a new ROM" and navigate to the zip file to install it and it starts the aroma installer, which I can't control since the touchscreen doesn't work. So, I'm kind of frustrated by now, I flash TWRP, because, maybe here, the touchscreen works. I flash it and try to reboot into it. But it doesn't work, it just stays at the Google splashscreen, I can restart by holding down the power button but it will just go back to the Google splashscreen. After a couple of tries I actually get it to turn off, so I hold down power and volume down to get into the bootloader but it just goes back to the splashscreen.
I can't get to the bootloader, I don't have a ROM installed and I can't get into the recovery. Is there anything I can still do or is everything lost?

Which TWRP version ? You need to use 2.8.7.0
You can't get to bootloader because of the timing when pressing power & volume down button.
If you can turn it off, press and hold volume down button then press power button until it vibrates then release the power button.