Hi,
Does anyone know any sense kernel support usb host mode? Searching many but no luck. I also try path drellisdee's #21 myself following this, but got many problem.
So any kernel, or anyone can make the kernel to support usb host on incredible 2?
Thanks in advance.
Related
Hi,
Does anyone know any sense 2.6.35 kernel with usb host mode working?
As far as I know these modules also need to be in the system to be able to get it working properly:
usbcore.ko
ehci-hcd.ko
scsi_wait_scan.ko
scsi_mod.ko
sd_mod.ko
usb-storage.ko
Can anyone point me to a sense 2.6.35 kernel and suitable modules?
Been searching for quite a while now....
Thanks in advance!
also looking for sense kernel with usb host, but no luck yet, ive tried usb host mod on cm 7.1.0 with cm 2.6.37 kernel and it was working, but want to have it working on sense roms also...
You can use Droidzone's kernels. You need to register in his site to download.
---------- Post added at 12:27 AM ---------- Previous post was at 12:15 AM ----------
As I am a new member, can't post the link, just look in the rom
supernova by droidzone.
Thanks, will try asap.
Sent from my HTC Desire using XDA
Postception
trying to use an OGT usb keyboard
i need hashcode's 3.0 kernel but my questions are:
what are kernel's??
how are they installed? ( is it like installing a rom )
and is a custom rom needed to use / install a custom kernel
NovaxxBite said:
trying to use an OGT usb keyboard
i need hashcode's 3.0 kernel but my questions are:
what are kernel's??
how are they installed? ( is it like installing a rom )
and is a custom rom needed to use / install a custom kernel
Click to expand...
Click to collapse
http://www.androidcentral.com/android-z-what-kernel
All ROMs contain a kernel. The developer may package them separately and they are often installed through recovery the same way as a ROM.
WRT to the Kindle Fire and OTG, only custom ICS and JB ROMs have kernels with OTG enabled. The stock software uses an older kernel. To my knowledge, nobody has developed a compatible kernel with OTG for it and it's not ever likely to happen.
OTG development for the Kindle Fire is in the early stages. Many USB devices do not work and even those that do may not be stable. There is no list of compatible devices, so it's all hit or miss, run at your own risk.
kinfauns said:
http://www.androidcentral.com/android-z-what-kernel
All ROMs contain a kernel. The developer may package them separately and they are often installed through recovery the same way as a ROM.
WRT to the Kindle Fire and OTG, only custom ICS and JB ROMs have kernels with OTG enabled. The stock software uses an older kernel. To my knowledge, nobody has developed a compatible kernel with OTG for it and it's not ever likely to happen.
OTG development for the Kindle Fire is in the early stages. Many USB devices do not work and even those that do may not be stable. There is no list of compatible devices, so it's all hit or miss, run at your own risk.
Click to expand...
Click to collapse
thank you!
Hi all
just wondering if anyone uses a usb audio dac with their m8? If so which rom/kernel are you running? Some internet research tells me that it works natively with the stock rom, but I'm wondering if anyone has gotten it to work with any AOSP based roms? I tried with CM11 stock kernel and excalibur but it didn't work with my fiio E17 or HRT Microstreamer
Thanks
tonysunshine said:
Hi all
just wondering if anyone uses a usb audio dac with their m8? If so which rom/kernel are you running? Some internet research tells me that it works natively with the stock rom, but I'm wondering if anyone has gotten it to work with any AOSP based roms? I tried with CM11 stock kernel and excalibur but it didn't work with my fiio E17 or HRT Microstreamer
Thanks
Click to expand...
Click to collapse
I'm using ARHD with my JDS Lab C5D and it work, with Elemental kernel.
help！ can anybody tell me where i can find a kernel to support the otg usb charge？
help. can anybody tell me where i can find a kernel to support the otg usb charge？
huweixia said:
help. can anybody tell me where i can find a kernel to support the otg usb charge？
Click to expand...
Click to collapse
im using xKat 5.0 with xluco v3 kernel. OTG cable works, but i think for charging it might be a pin issue withing the OTG cable itself. some OTG cables dont carry a two way charge pin, so they can power a usb drive but not be charged through it.
moabizzi said:
im using xKat 5.0 with xluco v3 kernel. OTG cable works, but i think for charging it might be a pin issue withing the OTG cable itself. some OTG cables dont carry a two way charge pin, so they can power a usb drive but not be charged through it.
Click to expand...
Click to collapse
I would like to have a try. Another question , can the original Samsung Rom 4.4.2 be installed into the xluco V3 Kernel?
Or should I maybe install vkat ROM before installing the Kernel ?
huweixia said:
I would like to have a try. Another question , can the original Samsung Rom 4.4.2 be installed into the xluco V3 Kernel?
Or should I maybe install vkat ROM before installing the Kernel ?
Click to expand...
Click to collapse
You can flash the xluco kernel to the stock rom, the aroma installer for xkat will give you an option to install the xluco kernel.
I really like the boost hans gave to his rom, its based on stock and debloated to an extent.
moabizzi said:
You can flash the xluco kernel to the stock rom, the aroma installer for xkat will give you an option to install the xluco kernel.
I really like the boost hans gave to his rom, its based on stock and debloated to an extent.
Click to expand...
Click to collapse
Could you please take a pic of your otg cable when it's charged
aaa
Hi guys... I've been using the LGOG E975 for years now , currently I'm running ARTMOD V7 rom on it using the stock kernel.. The only thing that it lacks is lack if storage..
I'll be very grateful if someone could point out the kernels that'll support USB OTG ( of course with the USB Y OTG ) On ARTMOD V7 .. I've used the AK xGenesis gee , and was able to mount external storage using Stick mount.. But it had a lotta bugs like screen brightness was too high even on 0 , glitches etc etc or maybe it justdidn't support the artmod v7..
So i just want you too point out all the kernels that support otg hack on this rom.. Or if there's an alternative then let me know it..
Thanks
Sent from my LG-E975
I don`t know how you booted with that kernel installed on a stock rom.
Even so and regarding your question , I think there`s a version of jollaman kernel tha has that(one of is first releases i believe).
Just search for it or ask him.
10x man..
Can you plzz explain all the type of kernels and roms.. I am a lil confused.. What type of kernels can i use on the stock kitkat..There are mostly these types of roms and their supported kernels..
1. Stock
2. Gee
3. MIUI
4. CM
5. AOSP
What are these..plzz explain and add anyone that i might have missed
And one more question .. I've read a post of Nexus 4 otg hack by ziddey.. There is a flashable zip for the hack that i remember flashing a long time ago.. But the phone didn't boot after it.. Isn't There a way to just flash an OTG hack zip on the stock kitkat or maybe a way to compile one with the hack..
Sent from my LG-E975
Solid kernel may work. I have installed it and it worked very well. But I don't know that OTA working because I didn't tried.