Dear friends,
I've been using DHD for one year.
I'm totally satisfied with it's performance.
I've tried ARHD, VU, VA roms and finally still using ER3BUS Final version.
In my previous mobile phone experience before DHD, I double tap on my bluetooth headset to redial the last number.
However I can not redial via bluetooth headset since I bought this phone.
Neither with the stock rom, nor with the custom roms I can not use redial function.
Is there any solution for this problem?
P.S. I have SonyEricsson MW600, Sennheiser bt620s, samsung wep400 bluetooth headsets I tried with all of them, unfortunately without success.
Thank you in advance for your kind replies.
Regards
Related
Hello, i bought Stereo bluetooth headphones JABRA BT 620s. Connected them to maj Uni and phonecall is OK. But when i want listen music the music is interrupting and sometimes the music going slower and slower. It seems like old gramophone whne u put finger on gramophon record during playing.
I upgraded Uni to Helmi AKU3.5 ver 1.3 and radio to 1.14.10 but no change ...
When i connect these phones to my friends mobil SE W710i it works perfectly ... If i asked about this problem contact centrum of Jabra they said that probably Bluetooth hasnot enough capacity ??? I hope its not truth...
Somebody has some idea how to repair this problem ?
Thank you
Me too
Hi,
had the same problem. I tried several tips published on this forum without any success. I was told by the dealer where i bought it that they also thought it would not work. I could bring it return without problem.
I am still looking for an alternative (BT, Stereo, microphone), preferably in-ear solution. Anyone an idea?
Hello,
I'm using the HTC P3300 PDA and I would like to use it with my older Nokia HDW-3 bluetooth headset. Pairing is succesfull and I can use the headset without a problem. But when I don't use the phone/headset for (example) 30 minutes and I would like to call someone, the P3300 displays a headset symbol, but I can't hear anything through the HDW-3. Turning off the headset and turning it on again will fix the problem...only for a short time. It looks like both devices can connect and work correctly, but after a standby time it doens't work anymore without a headset reset.
Does some recognize this problem? When pairing both, only the "handsfree" profile is available. (No headset profile?). The HDW-3 has always worked perfectly with my Nokia 6600 till last week (before upgrading to the HTC P3300). So I don't think it is defect. The P3300 works great with my Parrot 3100LCD bluetooth carkit, so it is unlikely that bluetooth on the P3300 isn't working correctly. What to do?
Thanks in advance for any reply.
Regards,
Roger
Hi all
As this is my first post I just want to say a big thankyou for all the contributers to this site, awesome information and keep up the good work.
I have been running Black Majik on my M3100 for a week or so now and have been really impressed. the only slightly annoying problem I have is with my BT Stereo headset (HTC BH S100) which I have had only a couple of days.
Listening to music and controlling the media player(s) (Audio Manager and WMP) is fine, the problem I get is answering/initiating calls from the headset. After a reboot of the phone, the headset works OK for both music and calls, but after turning the headset off/on, the call handling functions don't work although wireless stereo does - its as though the phone loses the headset profile but not wireless stero. Stopping/Starting the BT stack from comm manger seems to reinstate the headset functions but this is frustrating!
I have searched multiple forums but have not found anything of use yet!!
Does anyone have any ideas
Thanks in advance
M.
+1
same problem
please help us
Up ... Same WM6 version, same problem ... with a Nokia BT Headset, and a Sony Ericsson too ...
Thank you.
guess i have a worse problem then. cant hear my phone ring from my BT HS. not that ive tried to figure it out. i can live without listening to music. but it would be interesting to know how everyone is able to hear their phone ring from their headsets. im thinking its because of my headset. i have a moto hs810. does anybody concur?
merlynuk said:
Hi all
........
After a reboot of the phone, the headset works OK for both music and calls, but after turning the headset off/on, the call handling functions don't work although wireless stereo does - its as though the phone loses the headset profile but not wireless stero. Stopping/Starting the BT stack from comm manger seems to reinstate the headset functions but this is frustrating!
..........
M.
Click to expand...
Click to collapse
I have the same problem and I've tried a P3600 and kaiser and the same problem.
As merlynuk wrote the problem seem that the HD lose a free hand function of it profile and only a reset and sometime a pairng od device solve it.
It's for me important to use this function in car or call a voice command but the MTB button seem not work.
bought this HD because belived it would be perfect with a HTC PDA but it's not really.
Do you have some suggestion ?
Do you believe it's better to sell this HD and to buy another ?
Someone know a HD device thet work perfectly as free hand and function as a call, a start a vocal command etc etc work fine ?
Regards
aladino
got the same problem: bought the HTC BH S100 after my touch cruise cause I thought to have no problem with vocal commands, but it doesn't work. music, player control, phone and pairing are perfect but no vocal dialling..
how can we solve this??
Hi guy's, i have a problem i havn't found a solution yet....
i've paired my bluetooth headset and all outgoing calls work fine. But when i get an incoming call its audio is routed to the phone instead to my bt headset, so every time i get a call i manually need to tell it to use the bluetooth... it's very annoying and unsafe as i use my bt headset mainally while driving...
I've looked every where, and tried all sort of apps that turn your bt off when a call is done and turn it on and pair back when i receive a call... but it takes time until the phone pair back with the headset... no good....
Please help if you have any solution, or you too have the same issue...
I have a rooted phone, using pays 1.6 bravesoul (based on mcr 3.1).
Thanks
Sent from my HTC Desire using XDA App
I had the same problem when using 2.1 ROMs. It is fixed on Froyo (DeFroST 1. 2 at least)
Sent from my HTC Desire using XDA App
Thanks for the replay, The thing is that a very simple software can fix this, but I cannot any thing that works... and Froyo is not stable enough for me...
I have exactly the same issue but with 3 different bluetooth devices. The phone will make a call OK and use the bluetooth device for audio, but when receiving, the audio is routed to the phone. Weird.
On my Touch Diamond 2 it uses BT headset if i use the headset answer button to answer the call and if i use button on the phone it uses audio on the phone. Maybe its same with android?
No, it doesn't matter what device's button you use or even after a reboot.
hello all
I have two problems (for the moment ) after upgrade to lollipop (nexus 7 2013 LTE, root).
One--memory report, is resolved.
second- Skype is not properly using Bluetooth headsets,it still grabs audio from the internal mic, rather than from the Bluetooth headset(plantronics voyager).very disturbing to speakers, which were used with great quality of noise cancelation of plantronics.
After a few search, we have millions of threadswith this problems, but old.With 4.4.3 all was perfect.
Solutions, ideas?
Clear,IMO, is a bug...
me too again.
The problem is not only in skype, same simptom in another aplication, Rynga voip.
Is used the tablet microphone instead of bluetooth microphone, but the soud is received in bluetooth.
I tried to change the bluetooth settings, but without results.
very upsetting...
Hello
Is my thread...I ask, I respond.
Sorry if I am a little frustated, but is strange how nobody use the N7 2013 with bluetooth headset.
My story:
- upgrade at lollipop 5.02 stock...bluetooth plantronics legend don't function
- downgrade at kk 4.4.4....all ok, same version of skype 5.1xxx
- upgrade at Cyanogenmod 12 Nightlies one of the last version..same skype 5.1xx, again ALL FUNCTION!!
- upgrade last night the skype to version 5.2xxx...bingo...THE BLUETOOTH DON'T FUNCTION.I hear the ring in headset, but when the persons respond, the bluetooth became dead, only tablet mic and speakers function.
What to understand: is a problem of android , is a problem of skype?Exist the solutions?
To be continued.....