Develop Bugs

bell Recovery mode trick

1. download and open odin 4.03
2. With oden 4.03 running connect the phone
3. remove battery
4. hold volume- home and power while inserting the battery
5. smile you should be in recovery
(worked for we with a bell phone with 3 button disabled with the connect to computer screen)

getting into recovery mode isn't hard -- you can use ADB tools and it's MUCH easier
the problem is getting into download mode -- I was told these are different ?

You can go into download mode with adb too or something similar, i'll try to find the link when i get to my desktop
Sent from my GT-I9000M using XDA App

Funkadelick said:
getting into recovery mode isn't hard -- you can use ADB tools and it's MUCH easier
the problem is getting into download mode -- I was told these are different ?
Click to expand...
Click to collapse
gulmat said:
You can go into download mode with adb too or something similar, i'll try to find the link when i get to my desktop
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
Can those who have 3 button disable try wht the OP suggested ? I dont understand wht u 2 are talking about :S
Yes getting into recovery/download is easy w/o 3 button when u have a working firmware, its when u don't u end up a with a $600 brick. If what OP says is true, it should allow u 2 enter recovery/download even in a situation like the one previously described.

Wow - if this works it could really help a lot of folks out... anybody without 3-button recovery want to try this?
belkre said:
1. download and open odin 4.03
2. With oden 4.03 running connect the phone
3. remove battery
4. hold volume- home and power while inserting the battery
5. smile you should be in recovery
(worked for we with a bell phone with 3 button disabled with the connect to computer screen)
Click to expand...
Click to collapse

belkre said:
1. download and open odin 4.03
2. With oden 4.03 running connect the phone
3. remove battery
4. hold volume- home and power while inserting the battery
5. smile you should be in recovery
(worked for we with a bell phone with 3 button disabled with the connect to computer screen)
Click to expand...
Click to collapse
Tried the procedure described but no luck at all (at least with my phone). Thanks for the trick though.
I'm already sick and tired of having to cross my fingers every time I flash a firmware via ODIN, knowing that I only have one shot to get it right.

Assuming if this procedure works, will the phone be able to get into recovery mode the next time without connecting to Odin?
If it doesn't, the phone is still going to be a brick when it fails to boot.

anyone got link for Odin4?
i'm still using Odin3

I tried this also. Doesn´t work for me.
Seems rather pointless plugging it in to Odin if the computer cannot recognize the phone, if it could...then we wouldn´t have a problem to begin with.

[Q] help with second hand S5660 comes with galaxy ace rom!

hi everyone I'm Italian so sorry in case of bad english.
so this is the story, I have buy a galaxy gio (2nd hand) and it comes to me with a galaxy ace rom in fact in the device info the model is S5830. another and bigger problem is that some button are invert,in fact the home button do not have any effect while the effect of the home button is now the function of the vol-up button and the function of vol-up is now non existent. this cause the fact that is impossible to place the phone in download mode to flash with odin.I have flash the cyanogen 7 via recovery in order to bypass odin but the bad surprise is that the problem of the button remained unsolved after the reboot.the only mode that I be able to place the phone is "emergency dload mode arm9 mode" but odin stop in "setup connection" if I try to flash in this mode.my question is: there is something like bios in pc that command the phone that I can flash or replace with the correct one? thanks everyone in advance

go to the installed rom
and download an app that can change your keys
Sent from my GT-S5830 using xda premium

Buy an usb jig on ebay for less then 5 dollar, it will go into an alternative factory download mode, then flash an gio rom...
Think this is the only option since ur device cant get in normal download mode
Sent from my GT-S5660 using xda premium

Did all your keys work in recovery mode? Also, did you use standard recovery or Clockwork mod recovery?

f.83 said:
hi everyone I'm Italian so sorry in case of bad english.
so this is the story, I have buy a galaxy gio (2nd hand) and it comes to me with a galaxy ace rom in fact in the device info the model is S5830. another and bigger problem is that some button are invert,in fact the home button do not have any effect while the effect of the home button is now the function of the vol-up button and the function of vol-up is now non existent. this cause the fact that is impossible to place the phone in download mode to flash with odin.I have flash the cyanogen 7 via recovery in order to bypass odin but the bad surprise is that the problem of the button remained unsolved after the reboot.the only mode that I be able to place the phone is "emergency dload mode arm9 mode" but odin stop in "setup connection" if I try to flash in this mode.my question is: there is something like bios in pc that command the phone that I can flash or replace with the correct one? thanks everyone in advance
Click to expand...
Click to collapse
i dont know if this will work but maybe an usb jig wil work ?
its posted before
and the people there said it worked
maybe this would help with restoring stock rom with odin
Sent from my GT-S5830 using xda premium

Please accept my sincerest apologies. I misunderstood your post.
I think there was mean to be a "c" in your post.
go to the installed rom
and download an app that can change your keys
Click to expand...
Click to collapse
.
I wrongfully assumed you were telling the OP to "hang" his keys.
This was purely an error on my part, and for that I completely apologise.

ive moddiefied my post
Sent from my GT-S5830 using xda premium

Youre also human.
I whas already composing a message to you about it, he trued to help.
Lets keep on topic,
If you search the galaxy gio general topics you'll see a post about usb jigs, you should read them and consifer buying one, it problably is the only sollution to your problem
Sent from my GT-S5660 using xda premium
Sent from my GT-S5660 using xda premium

Install the Android SDK and use the "adb reboot download" command.
With a bit of luck, you should get access to the normal download mode without a USB jig.

Darkshado said:
Install the Android SDK and use the "adb reboot download" command.
With a bit of luck, you should get access to the normal download mode without a USB jig.
Click to expand...
Click to collapse
ive found Program on x10 threads wath is called adb mask ontroller
it is just adb but just simple
and has an great design and easy to use
its good if you dont know the adb commands
like me
Sent from my GT-S5830 using xda premium

Hi, I've read your reply,one-one I will try these methods. but while reading I have thinked one thing, why if I have installed cyanogen via sd zip now the button are still inverted? after all now I have another rom nevertheless the button remained in the earlier state.
About the question of markoghc in recovery mode I can go down in menu with vol-down but I can't go up with vol-up because the vol-up button has the function of "ok", again the home/ok button don't have any function and the power button coincide with "back function". the recovery is CWM-based Recovery v5.0.2.6.
I arrive to emergency dload mode by pressing toether volup-voldown-home-power. Also I suceed to put phone in ramdump mode.I have tried all possible combinations but I do not suceed to arrive to normal download mode. Another question is only cyanogen exist via sd zip or also stock rom exist to install via sd zip? do you know? thanks everyone

f.83 said:
Hi, I've read your reply,one-one I will try these methods. but while reading I have thinked one thing, why if I have installed cyanogen via sd zip now the button are still inverted? after all now I have another rom nevertheless the button remained in the earlier state.
About the question of markoghc in recovery mode I can go down in menu with vol-down but I can't go up with vol-up because the vol-up button has the function of "ok", again the home/ok button don't have any function and the power button coincide with "back function". the recovery is CWM-based Recovery v5.0.2.6.
I arrive to emergency dload mode by pressing toether volup-voldown-home-power. Also I suceed to put phone in ramdump mode.I have tried all possible combinations but I do not suceed to arrive to normal download mode. Another question is only cyanogen exist via sd zip or also stock rom exist to install via sd zip? do you know? thanks everyone
Click to expand...
Click to collapse
if you can get into emergency download mode,, you should be able to flash a stock rom

u must go to download mode. these are 3 mothods
1.with 3 combination button
VOL DOWN + HOME + POWER BUTTON
since ur phone button is inverted, try to learn it where button is vol down, home & power
2. if your rom rooted. i think it can more easy
download "terminal emulator" and open it and write:
su
reboot download
3. install android sdk / adb
u can goto download mode with command:
adb reboot download

voetbalremco said:
if you can get into emergency download mode,, you should be able to flash a stock rom
Click to expand...
Click to collapse
in emergency download mode odin recognize the phone but the process freeze in "setup connection"

f.83 said:
in emergency download mode odin recognize the phone but the process freeze in "setup connection"
Click to expand...
Click to collapse
Drivers arent installed..
Sent from my GT-S5660 using xda premium

voetbalremco said:
Drivers arent installed..
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
I have installed kies then driver are installed otherwise odin do not recognize phone, but in my case it recognize I start to flash but the process freez in "setup connection"

f.83 said:
I have installed kies then driver are installed otherwise odin do not recognize phone, but in my case it recognize I start to flash but the process freez in "setup connection"
Click to expand...
Click to collapse
Dont know how to fix that, sometimes its a problem with adb.
Go to task manager press execute and open cmd , then type adb, wait for all commands to show and type adb devices, and see if anything is listed..
Sent from my GT-S5660 using xda premium

f.83 said:
I have installed kies then driver are installed otherwise odin do not recognize phone, but in my case it recognize I start to flash but the process freez in "setup connection"
Click to expand...
Click to collapse
try to close kies
or uninstall it. install the usb driver only
http://www.mediafire.com/?0hq8xigi9r7f7c9

oh...I can't believe to that...really, now I want say a thing to all you, take a moment to read this post, you can't imagine how many search and forum I've write and read to ask for this problem, and no one, I repeat NO ONE, is arrived to say to me the most simple thing, the BEST thing, the thing that phiexz write:
phiexz said:
2. if your rom rooted. i think it can more easy
download "terminal emulator" and open it and write:
su
reboot download
Click to expand...
Click to collapse
And I found incredible this thing, that with the many posts in other forums too that have answer to me nobody is arrived to say that answer, anyhow...I entered in dowl mode and flash with odin,the button and all the rest returned to normal functioning, then, to phiexz go my biggest THANKS!!!!

[Q][SOLVED] Samsung Galaxy GIO (Can't enter download mode)

Hi everyone
As I said on the subject I have a Samsung Galaxy GIO that doesn't work properly. The phone wasn't booting, so a friend of mine tried to fix him using ODIN (because i don't know how to use it) but he used the Galaxy ACE drivers and the OPS file also so the phone now things that he is an ACE. It says Samsung Galaxy ACE when it boots and the volume UP, the home button, the camera don't work, and a few other stuff don't work also.
So what I came here to ask is if you guys now any other way to get the phone into the Download mode? Or now a way to restore everything without ODIN?
Before I think the combination was Volume DOWN, Home and POWER but know it doesn't work =/
Thank you all

Use a tutorial on how to install ADB , or try downloading terminal from market and type ADB REBOOT DOWNLOAD
Then flash a gio rom using odin
Sent from my GT-S5660 using xda premium

voetbalremco said:
Use a tutorial on how to install ADB , or try downloading terminal from market and type ADB REBOOT DOWNLOAD
Then flash a gio rom using odin
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
And can you tell me where to find the drivers for the GIO? I've been searching for almost 2 days and I've only found the .ops file.
Some ppl told me that the Samfirmware ROM's don't need them, that we just check a box that says one package and select the ROM and the OPS file, is that right?
And thank you

lh1tmaN said:
And can you tell me where to find the drivers for the GIO? I've been searching for almost 2 days and I've only found the .ops file.
Some ppl told me that the Samfirmware ROM's don't need them, that we just check a box that says one package and select the ROM and the OPS file, is that right?
And thank you
Click to expand...
Click to collapse
The ops file are the drivers....

lh1tmaN said:
And can you tell me where to find the drivers for the GIO? I've been searching for almost 2 days and I've only found the .ops file.
Some ppl told me that the Samfirmware ROM's don't need them, that we just check a box that says one package and select the ROM and the OPS file, is that right?
And thank you
Click to expand...
Click to collapse
Your device needs to have usb debugging on, and usb drivers so it can connect.
Sent from my GT-S5660 using xda premium

Look here for the files you need:
http://forum.xda-developers.com/showthread.php?t=1573628
Sent from my GT-S5660 using xda premium

use home button+power button+volume down button
not volume up button
hope it can help you

andylah said:
use home button+power button+volume down button
not volume up button
hope it can help you
Click to expand...
Click to collapse
Read dumbass.
If his buttons are screwed, and they dont work properly when booted, they wont work neither to enter download mode
Sent from my GT-S5660 using xda premium

lh1tmaN said:
Before I think the combination was Volume DOWN, Home and POWER but know it doesn't work =/
Thank you all
Click to expand...
Click to collapse
andylah said:
use home button+power button+volume down button
not volume up button
hope it can help you
Click to expand...
Click to collapse
Smart man.
Sent from my GT-S5660 using xda premium

Well you can't Use ADB because that needs your phone to boot up.
Try this:
Take out battery and wait for a while. Then put it back in.
Now, again, take out battery and wait for a while. Then put it back in.
Now try Download mode

lh1tmaN said:
As I said on the subject I have a Samsung Galaxy GIO that doesn't work properly. The phone wasn't booting, so a friend of mine tried to fix him using ODIN (because i don't know how to use it) but he used the Galaxy ACE drivers and the OPS file also so the phone now things that he is an ACE. It says Samsung Galaxy ACE when it boots and the volume UP, the home button, the camera don't work, and a few other stuff don't work also.
So what I came here to ask is if you guys now any other way to get the phone into the Download mode? Or now a way to restore everything without ODIN?
Before I think the combination was Volume DOWN, Home and POWER but know it doesn't work =/
Thank you all
Click to expand...
Click to collapse
Pull battery, plug usb into computer, hold volume down, then while holding volume down plug usb into phone.

I've done it.
I didn't had access to the Download mode, but i had to the recovery one, so I installed the CM7 from there, then i plug it in to the computer and did as voetbalremco (thank you) told me to. (I got into the Download mode using the ADB and then I tried to install the stock rom that I've downloaded from Samfirmware, this time I used the proper .OPS file and ROM but after ODIN finished the phone wasn't booting all do it was already showing Samsung Galaxy GIO, not ACE and the buttons were are already working so I've installed from recovery another ROM.
Thank you all for the help. Without you guys I wouldn't make it.

can't enter download mode
hello,
I'm new to this forum and i need help to boot my phone Samsung Galaxy GIO S5660. I've tried all above procedures but without success. Can anyone help me to boot up my phone???
thanks in advanced!

kiberas said:
hello,
I'm new to this forum and i need help to boot my phone Samsung Galaxy GIO S5660. I've tried all above procedures but without success. Can anyone help me to boot up my phone???
thanks in advanced!
Click to expand...
Click to collapse
tell us how you bricked your phone/made your phone not boot, otherwise we can't help.

wrong firmware upgrade
hello,
I was tried to do some "science" with my phone, upgrading the firmware with Flash ClockworkMod Recovery following instructions for Huawei U8160 in this post: http://forum.xda-developers.com/showthread.php?t=1259739.
After the image were downloaded, i have chosen to Backup Existing ROM (the old one, firmware 2.2.1), and the phone goes off without coming on again from that moment. I have no idea what might be happened but the phone remains off, like a dead body.
I'll appreciate a lot your help guys.

kiberas said:
hello,
I was tried to do some "science" with my phone, upgrading the firmware with Flash ClockworkMod Recovery following instructions for Huawei U8160 in this post: http://forum.xda-developers.com/showthread.php?t=1259739.
After the image were downloaded, i have chosen to Backup Existing ROM (the old one, firmware 2.2.1), and the phone goes off without coming on again from that moment. I have no idea what might be happened but the phone remains off, like a dead body.
I'll appreciate a lot your help guys.
Click to expand...
Click to collapse
I dont get it. You dont have a gio? Dont post here then. If you do, why the *** would you flash recovery from a completely different phone..
Go to service center and get it repaired, this thread is [solved] and can be closed
Sent from my GT-S5660 using xda premium

Hi All ,
I have a similar problem
but I can't enter Download mode , the phone always starts in recovery console :S
and Odin says : please connect a phone
help plz :S

APCOtech said:
Hi All ,
I have a similar problem
but I can't enter Download mode , the phone always starts in recovery console :S
and Odin says : please connect a phone
help plz :S
Click to expand...
Click to collapse
if you still can get in to recovery, you can just flash a rom?

Thanx for the quick reply
but I am new to android
which is the best rom them ? where can I get it ? :S

Hi guys!
I'm trying to bring back to life a Gio from a friend who somehow killed it trying to flash it.
Now the phone does nothing besides turn on the back light of the screen. I can´t put it in download mode or recovery mode.
Although Windows and Odin found the phone can´t flash it. I'm guessing because I can't get the phone to enter download mode.
Does anyone have a solution for this problem?
Thanks!

[TUTORIAL]for flashing samsung galaxy GIO s5660m with odin

Download Odin_Multi_Downloader_v4.42 from HERE
Download GIO_v1.0,ops from HERE
Download samsung galaxy gio s5660m Firmware from HERE
Samsung_usb_driver HERE Thanks for Peteragent5 for this software
1. Turn off your phone
2. Go to download mode by holding Home+Volume Down+Power Button
3. if the pink appears press the Volume up button
4. open Odin_Multi_Downloader_v4.42
5. click ops and choose the Gio_v1.0.ops
6. click the one package and make sure that the auto reboot and protect ops
7. click one package button at the lower right side
8. connect your phone to the computer using usb cable
9. wait until the odin detects your gio just look into the message at the lower left side and the com port mapping is turn to yellow
10. then click start button and wait until your gio will reboot, it can takes from 5-10 minutes
11.after flashing go to recovery mode and wipe data/ factory reset
12 REBOOT and enjoy!
I HOPE ITS helped

Nice guide for newbies:thumbup:.
Do install mobile drivers also b4 proceeding
Sent Via XDA™ Premium

Galaxy_Rohit said:
Nice guide for newbies:thumbup:.
Do install mobile drivers also b4 proceeding
Sent Via XDA™ Premium
Click to expand...
Click to collapse
thanks for reminding me dude.., ok i will edit

Can someone tell me if i should see some kind of action when using Odin apart from the clock?
I'm already almost 1 hour waiting to finish and nothing happens.
I know the phone is connected, I know clock is running but nothing else.
On my phone i only get this:
"Emergency Dload Mode
(ARM9 mode)
SAMSUNG"
I get this after i've been waiting for 20 minutes and unplug it from the phone. After i get an image with a phone and a computer with a yellow sign on the midle, and then when i press the keys to get in to download mode i get this "Emergency message".
Please someone tell me if i should keep waiting or if this is wasted time...
Thanks

rvrosa said:
Can someone tell me if i should see some kind of action when using Odin apart from the clock?
I'm already almost 1 hour waiting to finish and nothing happens.
I know the phone is connected, I know clock is running but nothing else.
On my phone i only get this:
"Emergency Dload Mode
(ARM9 mode)
SAMSUNG"
I get this after i've been waiting for 20 minutes and unplug it from the phone. After i get an image with a phone and a computer with a yellow sign on the midle, and then when i press the keys to get in to download mode i get this "Emergency message".
Please someone tell me if i should keep waiting or if this is wasted time...
Thanks
Click to expand...
Click to collapse
are you sure that did you used the right firmware for your gio?

badagila said:
are you sure that did you used the right firmware for your gio?
Click to expand...
Click to collapse
I'm almost sure.
How can i be sure?

rvrosa said:
I'm almost sure.
How can i be sure?
Click to expand...
Click to collapse
there is four kind of gio: S5660m, S5660v, S5660L and S5660
which one is yours?

badagila said:
there is four kind of gio: S5660m, S5660v, S5660L and S5660
which one is yours?
Click to expand...
Click to collapse
GT-S5660

Check again... It's Home+Volume Down+Power Pressing vol. up(by mistake) takes u to ramdump mode...if I'm not wrong.
Sent Via XDA™ Premium

Galaxy_Rohit said:
Check again... It's Home+Volume Down+Power Pressing vol. up(by mistake) takes u to ramdump mode...if I'm not wrong.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
maybe your right dude

but make sure that you gonna flash the right firmware for your gio dude or else? i don't know what will happen next

USB Problem
My gio i can´t flash via odin... the computer don´t reconize it. It says USB not Reconized.

desluca said:
My gio i can´t flash via odin... the computer don´t reconize it. It says USB not Reconized.
Click to expand...
Click to collapse
have you already installed the usb driver?

Yes i alredy instaled the Samsung kies and the msg its the same...

desluca said:
Yes i alredy instaled the Samsung kies and the msg its the same...
Click to expand...
Click to collapse
no not only kies also the driver. the USB DRIVER see the lik at the first post

Ok i will try to download the usb drivers for Gio.

Ok dude btw what kind of gio di you have?
sent from any where out there!

how to flass and instaal custom rom to galaxy gio olleh
badagila said:
Download Odin_Multi_Downloader_v4.42 from HERE
Download GIO_v1.0,ops from HERE
Download samsung galaxy gio s5660m Firmware from HERE
Samsung_usb_driver HERE Thanks for Peteragent5 for this software
1. Turn off your phone
2. Go to download mode by holding Home+Volume Down+Power Button
3. if the pink appears press the Volume up button
4. open Odin_Multi_Downloader_v4.42
5. click ops and choose the Gio_v1.0.ops
6. click the one package and make sure that the auto reboot and protect ops
7. click one package button at the lower right side
8. connect your phone to the computer using usb cable
9. wait until the odin detects your gio just look into the message at the lower left side and the com port mapping is turn to yellow
10. then click start button and wait until your gio will reboot, it can takes from 5-10 minutes
11.after flashing go to recovery mode and wipe data/ factory reset
12 REBOOT and enjoy!
I HOPE ITS helped
Click to expand...
Click to collapse
can i use this instrutction for my samsung galaxy gio olleh(korian version shw m290k.ed15.1936.kt)

Yes you can but you need to dl the firmware for your own region aand do not use the firmware from the link above
sent from my head
press thanks button if it helps

how to flass and instaal custom rom to galaxy gio olleh
badagila said:
Yes you can but you need to dl the firmware for your own region aand do not use the firmware from the link above
sent from my head
press thanks button if it helps
Click to expand...
Click to collapse
please can you tell how i do that.can you give me the correct firmware's link?pls pls

urgent help needed........help me outt plzzz

I hav a galaxy grand .rooted n cwm installed.the problem is my volume buttons are not working.i want to give it for warrenty n get it fixed.what to do....will my phone get denied for warrenty claim.helpe out for what to do..I cant flash official firmware becoz I cant enter download mode with out volumr button.

Sourabh_290292 said:
I hav a galaxy grand .rooted n cwm installed.the problem is my volume buttons are not working.i want to give it for warrenty n get it fixed.what to do....will my phone get denied for warrenty claim.helpe out for what to do..I cant flash official firmware becoz I cant enter download mode with out volumr button.
Click to expand...
Click to collapse
check this link
http://forum.xda-developers.com/showthread.php?t=749413

Thnx....but I tried it but my phone enters recovery mode but does not enter download mode even by terminal.i even tried the option from four way reboot but no any same results.
Is there any idea what is going wrong.

Sourabh_290292 said:
Thnx....but I tried it but my phone enters recovery mode but does not enter download mode even by terminal.i even tried the option from four way reboot but no any same results.
Is there any idea what is going wrong.
Click to expand...
Click to collapse
originally posted by rubensollie
You don't need to go to download mode to flash tars. If you boot the phone, the first 5 seconds you can click fastly on the start button in odin.

I
kenxda33 said:
originally posted by rubensollie
You don't need to go to download mode to flash tars. If you boot the phone, the first 5 seconds you can click fastly on the start button in odin.
Click to expand...
Click to collapse
thx kenxda33........but Sry didnt get wat u said....I want to flash official firmware from sammobile which I have downloaded....how to do it....will it enter download mode...help me out...m bit confused

Sourabh_290292 said:
thx kenxda33........but Sry didnt get wat u said....I want to flash official firmware from sammobile which I have downloaded....how to do it....will it enter download mode...help me out...m bit confused
Click to expand...
Click to collapse
open triangle away app reset flash counter to 0 switch off the phone open odin select pda load your firmware wait for 5 minutes connect your phone to pc switch on as soon as your phone connect id: com click start button. I dont no if its work or not try at your own risk
2.method) link http://m.youtube.com/watch?v=pH5TX_Ig4sY&guid=&hl=en-GB&gl=IN&client=mv-google
update rooted phone guide. after this your phone got official status but maybe recovery cwm but who check if your volume button not working. install software of your choice and then go service center and say your volume buttons not working and say do not format your phone because I dont have backup. I hope this helps.

thnx
Hey thnx kenxda33....I tried all even updating but it entrs cwm and installation is aborted....nthings working for me.....anyways thnx a lot.....

Shut down your phone. pull the battery out.
connect your tether cable to the phone and USB
to computer. start odin, put tar file in PDA box.
don't change any other settings. Put your
phone in download mode by pressing both home & down volume buttons (not Power) and insert the battery. once in download mode, click on
Start on odin..